Experimental Research Articles

Electrochemical Allylic C(sp3)-H Isothiocyanation via [3,3]-Sigmatropic Rearrangement.

The direct allylic C(sp3)-H functionalization provides a straightforward protocol for the synthesis of valuable molecules. We report herein the first chemo- and site-selective method for allylic C(sp3)-H isothiocyanation of various internal alkenes under mild electrochemical conditions. This method exhibits broad functional group tolerance and excellent selectivity and can be applied for late-stage isothiocyanation of bioactive molecules. Combined experimental and computational studies indicate that the reaction proceeds via an unexpected [3,3]-sigmatropic rearrangement.

Experimental biological studies of novel tetradentate hydrazone Cu(II) complexes for potential applications in medicinal chemistry

A series of mononuclear Cu(II) complexes were synthesized using a potential tetradentate hydrazone ligand obtained from the reaction between phenylhydrazine groups and 2,5-thiophenedicarboxaldehyde. The structures of ligands and complexes were elucidated through various spectroscopic techniques, confirming their composition. All complexes were found to adopt four-coordinated geometries, indicating the formation of stable structures. Spectroscopic analysis revealed that the hydrazone ligand coordinated with the Cu(II) metal ions as a dibasic tetradentate ligand by utilizing the phenolic oxygen and azomethine nitrogen atoms. The binding affinity of the complexes with calf thymus DNA (CT-DNA) was investigated using absorption and viscosity measurements, demonstrating their interaction through the intercalation mode. The binding studies showed that the Cu(II) complexes exhibited varying degrees of binding affinity, with Cu(L4) demonstrating the highest affinity, followed by Cu(L1), Cu(L2), and Cu(L3). Moreover, the DNA fragmentation properties of the Cu(II) complexes were evaluated, suggesting their potential utilization in pharmaceutical applications. The obtained results highlight the significance of these novel complexes in the field of medicinal chemistry.

Experimental and computational studies of novel cyclic ammonium based ionic liquids as corrosion inhibitors for carbon steel in acid medium

The challenge of corrosion posed as a result of acidic sittings is considered as a major industrial concern, wherein ionic liquids serve as crucial in addressing the corrosive impacts on metals. In this study, five selected cyclic ammonium based ionic liquids were synthesized; IL-1MPyrBr, IL-1MPipBr, IL-2PyBr, IL-3MPyBr and IL-4MPyBr and their chemical structures were characterized using a variety of spectroscopic techniques (FT-IR, IH-NMR, 13C-NMR, Elemental analysis and thermal gravimetric analysis (TGA). Their corrosion inhibition efficiency was studied on carbon steel in 1 M HCl via different concentrations at 298 K using chemical and electrochemical parameters (PDP and EIS). DFT quantum parameters were computed, and the noted results were in complete compatible with the experimental. The synthesized ILs recorded excellent inhibition on the carbon steel corrosion in acidic media with increasing efficiency by increasing the inhibitor concentrations from 20 to 100 ppm. Different cations in the synthesized ILs affect the anti-corrosion effect and IL-3MPyBr showed the highest inhibition (ηR); 96.12% using the lowest concentration. Kinetic and thermodynamic considerations were studied and illustrated.

Synthesis and Investigations of Corrosion Inhibition Performance of an Ester and Acid α-Hydroxyphosphonates Combining Experimental, Density Functional, and Monte Carlo Methods

Synthesis and Investigations of Corrosion Inhibition Performance of an Ester and Acid α-Hydroxyphosphonates Combining Experimental, Density Functional, and Monte Carlo Methods

Efficacy of laser hair removal in hidradenitis suppurativa: A systematic review and meta-analysis.

Hidradenitis suppurativa (HS) is a chronic inflammatory condition characterized by painful nodules, draining tunnels, and fibrotic scarring in intertriginous, hair-bearing areas. The pathogenesis involves follicular occlusion and subsequent rupture, leading to uncontrolled inflammation. Treatment options for HS are limited and lack universal effectiveness. Laser hair removal (LHR) has been explored as a potential treatment; however, the efficacy and appropriate laser modalities remain unclear. This systematic review examined the efficacy and adverse effects of LHR in HS. A comprehensive literature search was conducted from inception to September 2023 in Ovid MEDLINE, Ovid Embase, and The Cochrane Library (Wiley) with predefined inclusion and exclusion criteria, and a meta-analysis was conducted. Ten studies were selected (n = 227 total patients) and included six randomized controlled trials, two nonrandomized experimental studies, and two case series. Various laser modalities, including long-pulsed neodymium-doped yttrium aluminum garnet (Nd:YAG) (n = 115), intense pulsed light (n = 18), Alexandrite (n = 54), intralesional 1064 nm diode (n = 20), and combined fractional CO2 and long-pulsed Nd:YAG laser (n = 20), consistently demonstrated significant improvement in HS disease severity, irrespective of the disease scoring method used. Minimal adverse effects (primarily mild pain and erythema) were reported. A meta-analysis of three studies utilizing long-pulsed Nd:YAG laser demonstrated a standardized mean difference in disease severity of -1.68 (95% confidence interval: -2.99; -0.37), favoring treatment with LHR for HS. Hair follicles are key in HS pathogenesis and all included studies showed a significant improvement in HS disease severity after LHR regardless of the laser device used, likely related to hair follicle unit destruction. HS is a complex and heterogenous condition, and multiple disease scoring methods complicate outcome comparisons across studies. However, LHR, utilizing various techniques, is an effective treatment option for HS with minimal adverse effects.

Biodegradable material for glaucoma drainage devices - A pilot study in rabbits.

To study the morphological and histological characteristics of the fibrous capsule formed around a novel biodegradable glaucoma drainage device (GDD) implant made of oxidized regenerated cellulose (ORC) after 1 and 3 months of its implantation. It was a prospective, interventional, preclinical experimental study using New Zealand white rabbits. All animals underwent GDD implantation with a novel biodegradable device. The device's body was made of ORC and attached to a silicone tube, connecting the body to the anterior chamber. Histopathology (hematoxylin and eosin/Masson's trichrome staining) and immunohistochemistry (Alpha-Smooth Muscle Actin expression) characteristics of the bleb formed around the novel device were noted at 1 and 3 months. One month post implantation, the biodegradable material produced a significant foreign body type of reaction evidenced by the exuberant infiltration by macrophages, lymphocytes, and multinucleated giant cells. The granulomatous response subsided by 3 months with disorganized collagen deposition on Masson's trichrome staining. The silicone tube was an internal control, and histopathology demonstrated well-organized collagen deposition around it at 3 months. Immunohistochemistry for α-smooth muscle actin also demonstrated more myofibroblast transformation at the site of the tube than the biodegradable implant. Our results indicate that the tissue response around a biodegradable GDD was different from the response to conventional devices. A diffuse, loose vascularized mesh was observed to develop, which may be more compatible with sustained IOP control over a longer period, in contrast to the usual thick and dense capsule formed around the non-biodegradable devices.

Experimental study of a scaled bridge model with a unidirectional rocking isolation bearing system (Uni‐RIBS) through shaking table tests

AbstractThis study presents the experimental results on a scaled bridge model with a newly proposed unidirectional rocking isolation bearing system (referred to as Uni‐RIBS) on a shaking table. The bridge model features one superstructure girder and four bearings. The experimental input encompassed a variety of recorded, design, and harmonic ground motions, characterized by differing peak accelerations, with or without vertical components, and time‐scaled attributes. The superstructure girder's mass was altered for two conditions (full and half). The test results validate the rocking mechanism inherent in the Uni‐RIBS and demonstrate the analytical model's accuracy in predicting the system's dynamics, including its negative stiffness, mass‐independent, and energy dissipation characteristics during bearing rotation reversals. Additionally, this study examines the effectiveness of a simplified numerical model in varying complexities for predicting the seismic responses of the bridge model.

Tolerance for corruption and descriptive social norm: An experimental study of embezzlement.

Public tolerance for corruption within a society significantly influences the prevalence of corrupt practices, but less is known about how this tolerance evolves with social norms. This paper presents experimental evidences demonstrating that the descriptive social norm indicating widespread corruption can lead to increased tolerance for corruptive acts. We introduce an asymmetric information ultimatum game to simulate the interactions between embezzlers and citizens. Game theoretical analysis reveals that victims anticipating corruption will exhibit greater compliance with embezzlement when the offers are evaluated based on descriptive norms. To test the hypothesis, we employ a framing effect to induce variations in descriptive norms within a behavioral experiment. Although the treatment effect is significant only in the subgroup of student cadres, this subgroup demonstrated increased beliefs about embezzlement, greater tolerance for corruption, and a heightened propensity to embezzle when exposed to framings with hierarchical implications. This paper contributes to the corruption literature by examining the effects of descriptive norms on victims' responses to embezzlement. It offers a more comprehensive perspective on how social standards shape public opinions and corrupt actions, enhancing our understanding of the self-reinforcing nature of corruption.

An Experimental Study of the Properties of Carbon Fiber/Epoxy Composites Mixed with Rubber Granules

In this research work, the mechanical properties of hybrid composites reinforced with woven carbon fiber mats particulated with natural rubber powders as fillers in the epoxy resin matrix were investigated. The specimens were prepared by the hand-layup process followed by a vacuum bag moulding process. The vacuum moulding reduces the voids or cavities in the hybrid composites. The natural rubber powder was added in different weight proportions (5%, 10%, 15%, and 20%), and carbon fiber is added in 20% for all the specimens. Experiments such as tension testing, flexural testing, water absorption/acid corrosion/base corrosion tests, dynamic mechanical analysis (DMA), and scanning electron microscopic (SEM) analysis were conducted to evaluate the epoxy carbon rubber (ECR) composites. The tensile and flexural test findings demonstrated that the addition of 10% natural rubber particles gave better results as compared with other proportions. The water/acid/base absorption test findings reveal that the ECR composites are not affected by water/acid/base. The DMA teat findings show that ECR composites having 10% natural rubber have higher damping factor, storage, and loss modulus. The SEM analysis shows that ECR hybrid composites with 10% rubber particles contained a uniform distribution of rubber particles over reinforcement, and also, there were no cracks and voids. According to this research findings, ECR hybrid composites with 10% natural rubber particles prepared during the vacuum bag moulding process can be used to prepare aerospace interior components.

Numerical Calculation and Experimental Study of the Axial Force of Aero Fuel Centrifugal Pumps

Axial force is one of the important factors affecting the life and reliability of centrifugal pumps. Based on the SST turbulence model, the unsteady internal flow field of an aero fuel centrifugal pump under various working conditions was analyzed by using the finite volume method and the axial force of the impeller component was predicted. The position servo force measuring system was used to measure the axial force of the fuel centrifugal pump and the theoretical formula of axial force was modified according to the numerical results and experimental values. The study shows that the pressure distribution of the front and rear pump chambers presented uneven circumferential distribution under the influence of dynamic and static interference through numerical simulation. The simulated head number is basically consistent with the test result and the maximum error of the axial force value obtained by the numerical calculation and the experimental value was 9.7% under different speeds, which verified the accuracy of the numerical simulation. Furthermore, the modified formula can accurately calculate the axial force of the fuel centrifugal pump with an error of less than 9.88%. The results of the study provide a theoretical basis for the calculation and balance of axial force in an aero aero fuel centrifugal pump.

IMPROVEMENT OF CAPILLAROSCOPY METHOD FOR STUDYING HUMAN MICROCIRCULATION

The human circulatory system has historically captivated researchers in the field of medicine. Modern medicine, however, has moved beyond identifying a single crucial element, such as the heart or venous system, for maintaining blood flow. Instead, it emphasizes a more analytical approach, focusing on the interconnected functioning of all components within the system. The aim of this work is to analyze the existing methods of studying blood microcirculation and to improve the technology of capillaroscopy, technical means of raster microphotography to determine the physiological state and disorders of capillary circulation. To achieve this objective, we address the following tasks: analyzing existing non-invasive methods for studying the human vascular system; enhancing the optical capillaroscopy method through the utilization of modern high-resolution digital cameras, computer, and multimedia equipment, along with appropriate software for analyzing electronic images; developing a technological scheme and equipment design for digital microphotography of capillaries in the periungual region of the upper extremities; providing software solutions for registering and analyzing digital microphotographic images obtained through capillaroscopy; conducting experimental studies to explore the structure and properties of capillaries utilizing the developed technologies and equipment. Magnetic resonance imaging (MRI) enables the comprehensive evaluation of both anatomical and functional aspects of blood flow. Magnetic resonance angiography (MRA) capitalizes on the distinction between the signal emitted by moving tissue (blood) and that of surrounding stationary tissue, facilitating the acquisition of vascular images without the need for radiopaque contrast agents. Ultrasonography integrates Doppler and conventional ultrasound techniques, providing physicians with insights into blood vessel structure and blood flow dynamics. Traditional ultrasound employs sound waves that are imperceptible to the human ear and bounce off blood vessels, while Doppler ultrasound measures the velocity of sound wave reflection from moving elements. Ophthalmoscopy constitutes a fundamental component of standard ophthalmological examinations, serving as a pivotal tool for diagnosing eye conditions and evaluating the condition of blood vessels. Additionally, ophthalmoscopy aids in diagnosing autoimmune disorders. Capillaroscopy enables comprehensive assessments of both systemic and regional microcirculation disorders, facilitating the characterization of tissue metabolism. Dysfunction in capillary function contributes to circulatory impairments, leading to blood stasis, metabolic irregularities, and compromised immunity, thereby exacerbating existing conditions and predisposing individuals to new diseases. Optical computerized capillaroscopy offers a non-invasive means of visualizing, examining, and archiving capillary images, enabling clinicians to make informed assessments regarding blood microcirculation. Experimental validation of the optimized hardware and software capillaroscopy system was conducted using nail bed capillaries of a patient with type II diabetes mellitus undergoing insulin therapy for 10 years. This study underscores the importance of refining and enhancing optical capillaroscopy methodologies by leveraging high-resolution camera sensors and modern computational tools for image processing.

Which type of forceps is better for nonrotational operative births? A simulation study comparing Thierry spatulas and Simpson-Braun and Kielland forceps.

Obstetric forceps play an important role in safe childbirth, yet there is a lack of distinction between various forceps types in clinical practice. This study aimed to evaluate and compare perineal pressure and forces on the baby during nonrotational forceps-assisted births using Simpson-Braun forceps, Kielland forceps, and Thierry spatulas on a simulation model. This experimental study involved six obstetricians conducting 108 forceps-assisted births on a simulation model. Instruments were assessed for their impact on perineal pressure, traction force, and operator-assessed difficulty. Thierry's spatulas exerted the lowest force on the baby, while Kielland forceps exhibited the lowest perineal pressure, though not statistically significant. An experienced obstetrician demonstrated less perineal pressure with Simpson forceps. Notably, no significant differences in difficulty were observed between instruments. This study highlights distinctions in forceps performance, with Thierry spatulas applying the least force on the fetal head, while an experienced obstetrician fared better with Simpson forceps in terms of perineal pressure. Kielland forceps remain a viable alternative for nonrotational forceps births, showing comparable outcomes.

INDEX-BASED ASSESSMENT ALGORITHM FOR ORAL HYGIENE IN WEARERS OF FIXED DENTAL BRIDGES

Introduction: The study focuses on the importance of maintaining oral hygiene, especially in wearers of fixed dental bridge. The impact of inadequate oral hygiene care on the development of dental diseases and the necessity for developing effective methods for its assessment are examined. Research objective: The aim of this study is to refine the fluorescent diagnostic method in orthopedic dentistry and to develop an index for assessing the hygienic status of natural teeth and fixed dental prostheses through an in vivo experiment. This method is intended to improve the diagnosis of oral conditions in wearers of fixed prostheses, ultimately enhancing the quality of their orthopedic treatment. Materials and methods: The study is based on the application of fluorescent diagnostics using Rhodamine B dye, which, when exposed to ultraviolet light, allows for the detection of dental deposits. The technique involves treating the surfaces of teeth and prostheses with a special solution that enhances the visibility of dental plaque under ultraviolet illumination. Research results: The experimental results demonstrated the high efficiency of the fluorescent method in detecting dental deposits both on the enamel of natural teeth and on the ceramic surface of fixed dentures. The digital analysis method allows for obtaining specific graphical indicators of the biofilm area, enhancing the relevance of an individual approach. Conclusions: Conclusions: The experimental study confirmed the high efficiency of the refined fluorescent method for assessing the hygienic status of the oral cavity, applicable to both natural teeth and fixed orthopedic constructions. This technique enables accurate assessment of hygiene status, facilitating effective prevention of dental diseases and optimization of treatment procedures. The method is convenient to use, and the software is accessible for clinicians. Further observations on the outcomes of this technique in patients with various orthopedic profiles are planned to expand its applicability.

Improving approaches to hygienic rationing of antimicrobial drugs

Introduction. Currently, the production of medicines, including those with antimicrobial properties, is expanding at chemical and pharmaceutical enterprises. However, scientific approaches to hygienic regulation of the content of specific antimicrobials in the air of the work area are not yet available. The study aims to substantiate approaches to predicting approximate safe levels of exposure (ASLE) to substances with a specific antimicrobial effect. Materials and methods. The scientists have carried out the research in two stages. The first stage is an experimental study of the single inhalation effect of an antibiotic clarithromycin at concentrations of 54.2; 25.4; 15.3; 9.1; 2.8 and 0.9 mg/m3 on mongrel female rats weighing 230–250 g. The authors have evaluated the indicators of toxic (morphological and functional parameters of the nervous, cardiovascular and respiratory systems, biochemical parameters of the liver and kidneys, as well as the composition of peripheral blood) and specific effects (qualitative and quantitative composition of the microbiota of the large intestine of rats). The second stage was the analysis of the database on hygienic rationing of chemicals, which consisted in searching for hygienic standards (ASLE, MPC), threshold concentrations for the general toxic (Limint) and specific (Limbact) effects of antimicrobials. Results. During the experiment, experts have established the threshold of acute inhalation exposure (Limac int) of clarithromycin at a concentration of 25.4 mg/m3 according to the total toxic effects (peripheral blood counts, liver and kidney function). When exposed to an antibiotic at a concentration of 2.8 mg/m3, there was an imbalance of the intestinal microflora in the absence of a general toxic effect, which indicated a specific and selective antimicrobial effect of the drug. Based on the analysis of literature data, the parameters of toxicometry of 21 substances with antimicrobial effect were determined, their representative sample was justified and its regression analysis was carried out. Conclusion. Based on experimental and literary data, the authors established a significantly strong correlation (r=0.729) between the values of MPC (ASLE) and the threshold of antimicrobial action (Limbact). They also developed a mathematical equation to predict safe levels of antimicrobials based on their specific and selective activity.

Thermal performance augmentation of honeycomb metal matrix embedded phase change material in shell-tube latent heat storage unit

Due to the global warming challenge, there is a transition from the utilization of fossil fuels to harvesting new and renewable energy sources globally. Solar energy, being the infinite source with easy accessibility, leads the race among other allied sources. However intermittent nature of it demands an efficient thermal energy storage system. In the present experimental study, an innovative heat transfer augmentation technique i.e. aluminium honeycomb grill and fine mesh embedded in PCM is demonstrated. Both visualization of PCM melt fraction and capture of temperature contour complemented each other to identify the honeycomb version (HC-LHSU) as substantially better (43 % improvement in charge period) than the base model (BM-LHSU). On the other side, due to fine pores (porosity = 95 %), the fine meshmodel (FM-LHSU) yielded poorer results than BM-LHSU. Even the temperature gradient that exists during the charge or discharge period is gauged and recognized HC-LHSU as the best, followed by BM-LHSU and FM-LHSU. Since the onset of the phase transition zone reflects heat storage rate, the same is identified, and the charge period (sensible heat + latent heat) assessed to be 8000 s, 10000 s, and 12,000 s for HC-LHSU, BM-LHSU, and FM-LHSU, respectively. Further, an improvement in the average Nusselt number by 74 % and 67 % during the charge and discharge period respectively compared to the base model justified the honeycomb grill's role in augmenting the energy storage unit's performance.

Atomistic Details of Methyl Linoleate Pyrolysis: Direct Molecular Dynamics Simulation of Converting Biodiesel to Petroleum Products

Dependence on petroleum and petrochemical products is unsustainable; it is both a finite resource and an environmental hazard. Biodiesel has many attractive qualities, including a sustainable feedstock; however, it has its complications. The pyrolysis (a process already in common use in the petroleum industry) of biodiesel has demonstrated the formation of smaller hydrocarbons comprising many petrochemical products but experiments suffer from difficulty quantifying the myriad reaction pathways followed and products formed. A computational simulation of pyrolysis using “ab initio molecular dynamics” offers atomic-level detail of the reaction pathways and products formed. Herein, the most prevalent fatty-acid ester (methyl linoleate) from the most prevalent feedstock for biodiesel in the United States (soybean oil) is studied. Temperature acceleration within the atom-centered density matrix propagation formalism (Car–Parrinello) utilizing the D3-M06-2X/6-31+G(d,p) model chemistry is used to compose an ensemble of trajectories. The results are grounded in comparison to experimental studies through agreement in the following: (1) the extent of reactivity (40% in the experimental and 36.1% in this work), (2) the homology of hydrocarbon products formed (wt % of C6–C10 products), and (3) the CO/CO2 product ratio. Deoxygenation pathways are critically analyzed (as the presence of oxygen in biodiesel represents a disadvantage in its current use). Within this ensemble, deoxygenation was found to proceed through two subclasses: (1) spontaneous deoxygenation, following one of four possible pathways; or (2) induced deoxygenation, following one of three possible pathways.

Fast rotation of nuclei with extreme isospin in the vicinity of neutron and proton drip lines.

Abstract The analysis of the present understanding of collective rotation in very neutron-rich nuclei is presented. It is shown that collective rotation can lead to the increase of stability of rotational states with increasing spin. The detailed investigation of rotational excitations in very proton-rich nuclei confirms this conclusion and indicate that experimental studies of such features are more feasible in the nuclei near proton drip line. They also show that rotational bands which are proton quasi-bound at zero or low spins can be transformed into proton bound ones at high spin by collective rotation of nuclear systems. This is due to strong Coriolis interaction which acts on high-j or strongly mixed M orbitals and drives the highest in energy occupied single-particle states into negative energy domain. These physical mechanisms lead to a substantial extension of the nuclear landscape beyond the spin zero proton drip line. In addition, a new phenomenon of the formation of giant proton halos in rotating nuclei emerges: it is triggered by the occupation of strongly mixed M intruder orbitals.

Theoretical study on photoelectric properties of ferroelectric photovoltaic perovskite CsGeBr3 based on first-principle calculations

Ferroelectric photovoltaic materials have attracted great attention because of their unique photoelectric conversion mechanism, high photo-generated voltage, and adjustable polarization intensity. Traditional ferroelectric oxide perovskites such as BaTiO3, BiFeO3, and Pb(ZrTi)O3 have attracted much attention but they are not suitable as light absorbing layers in solar cells, due to the large optical bandgap, low light absorption rate, and small photogenerated current. Therefore, it is necessary to seek prominent materials with both ferroelectric and suitable band gaps. Recently, the evidence of ferroelectricity in the typical three-dimensional all-inorganic halide perovskites CsGeX3, with band gaps of 1.6 eV to 2.3 eV has been confirmed. However, the spontaneous polarization of ferroelectric perovskite CsGeX3 is ∼10 to 20 μc cm−2 which is weaker than that of ABO3 (∼26 to 75 μc cm−2). Strain engineering has a significant influence on the properties of semiconductor materials by controlling the lattice scaling and the internal atomic spacing. Hence, in this work, strain engineering is introduced to adjust the ferroelectric polarization and the photoelectric properties of ferroelectric perovskite CsGeBr3. The calculated results show that when the applied compressive strain increases from 0% to −4%, the spontaneous polarization of ferroelectric perovskite CsGeBr3 increases from 14.23 μc cm−2 to 51.61 μc cm−2, and the band gap reduces from 2.3631 eV to 1.5310 eV. The effective mass of electrons and holes gradually reduces, exciton binding energies decrease from 48 meV to 5 meV, and the optical absorption coefficient is strongly enhanced from 3 × 105 cm−1 to 5 × 105 cm−1 in the visible range. Besides, the power conversion efficiency(PCE) of CsGeBr3 is significantly increased from 16.95% to 26.77%. Therefore, the results indicate that the application of compressive strain can increase the ferroelectric polarization and enhance the original photovoltaic performance of ferroelectric perovskite CsGeBr3. Our theoretical calculations can provide useful insights and beneficial guidance into experimental studies of ferroelectric perovskites in photoelectric applications.

Neurotoxicity of crack cocaine exposure: evidence from a systematic review of in vitro and in vivo studies.

Several studies suggest that crack cocaine users exhibit higher prevalence of both psychiatric and psychosocial problems, with an aggressive pattern of drug use. Nevertheless, few experimental studies attempted to verify the neurotoxicity after crack cocaine exposure, especially when compared with other routes of cocaine administration. This systematic review aimed to verify whether in vitro and/or in vivo crack cocaine exposure is more neurotoxic than cocaine exposure (snorted or injected). A search was performed in the PubMed, EMBASE, Scopus, Web of Science, and LILACS databases for in vitro and in vivo toxicological studies conducted with either rats or mice, with no distinction with regard to sex or age. Other methods including BioRxiv, BDTD, Academic Google, citation searching, and specialist consultation were also adopted. Two independent investigators screened the titles and abstracts of retrieved studies and subsequently performed full-text reading and data extraction. The quality of the included studies was assessed by the Toxicological data Reliability assessment Tool (ToxRTool). The study protocol was registered with the Prospective Registry of Systematic Reviews (PROSPERO; CRD42022332250). Of the twelve studies included, three were in vitro and nine were in vivo studies. According to the ToxRTool, most studies were considered reliable either with or without restrictions, with no one being considered as not reliable. The studies found neuroteratogenic effects, decreased threshold for epileptic seizures, schizophrenic-like symptoms, and cognitive deficits to be associated with crack cocaine exposure. Moreover, both in vitro and in vivo studies reported a worsening in cocaine neurotoxic effect caused by the anhydroecgonine methyl ester (AEME), a cocaine main pyrolysis product, which is in line with the more aggressive pattern of crack cocaine use. This systematic review suggests that crack cocaine exposure is more neurotoxic than other routes of cocaine administration. However, before the scarcity of studies on this topic, further toxicological studies are necessary.

All-optical source size and emittance measurements of laser-accelerated electron beams

Novel schemes for generating ultralow emittance electron beams have been developed in past years and promise compact particle sources with excellent beam quality suitable for future high-energy physics experiments and free-electron lasers. Recent theoretical work has proposed a laser-based method capable of resolving emittances in the sub 0.1 mm mrad regime by modulating the electron phase space ponderomotively. Here we present the first experimental demonstration of this scheme using a laser wakefield accelerator. The observed emittance and source size are consistent with published values. We also show calculations demonstrating that tight bounds on the upper limit for emittance and source size can be derived from the “laser-grating” method even in the presence of low signal to noise and uncertainty in laser-grating parameters. Published by the American Physical Society 2024