Photonic Waveguides Research Articles

Approaching the adiabatic infimum of topological pumps on thin-film lithium niobate waveguides.

Topological pumps reveal topological insights of adiabatic mode evolution, in which adiabaticity plays a crucial role. However, the adiabatic infimum, i.e., the possible shortest evolution duration of an adiabatic topological pumping process, has remained elusive. In this study, we report the approach of adiabatic infimum in topological pumps in photonic waveguides based on the lithium niobate-on-insulator (LNOI) platform. Besides the most common way to achieve adiabaticity by slowing down the evolution of the system, the adiabaticity of a topological pump is also contingent on an effective Berry connection between instant eigenstates, which can be controlled by the selection of specific pump loops. Specifically, we develop a strategy to identify a pump loop with a minimized effective Berry connection, corresponding to the adiabatic infimum of a topological pump. As such, it is experimentally demonstrated that topological pumps can happen even with rapid evolution speed, at which the conventional pump would completely fail. The adiabatic infimum accelerates the topological pumps from the constraints of slow evolution and facilitates the design of compact topological devices.

Efficient TE-polarized mode coupling between a plasmonic tunnel junction and a photonic waveguide

Efficient TE-polarized mode coupling between a plasmonic tunnel junction and a photonic waveguide

Efficient coupling between photonic waveguides and III-nitride quantum emitters in the UV-visible spectral range

Efficient coupling between photonic waveguides and III-nitride quantum emitters in the UV-visible spectral range

Two-dimensional non-Abelian Thouless pump

Non-Abelian Thouless pumps are periodically driven systems designed by the non-Abelian holonomy principle, in which quantized transport of degenerate eigenstates emerges, exhibiting noncommutative features such that the outcome depends on the pumping sequence. The study of non-Abelian Thouless pump is currently restricted to 1D systems, while extending it to higher-dimensional systems will not only provide effective means to probe non-Abelian physics in high-dimensional topological systems, but also expand the dimension and type of associated non-Abelian geometric phase matrix for potential applications. Here, we propose the design and experimental realization of 2D non-Abelian Thouless pumps on a photonic chip with 2D photonic waveguide arrays, where degenerate photonic modes are topologically pumped simultaneously along two real-space directions. We reveal the associated non-Abelian group and experimentally demonstrate the non-Abelian feature by measuring the pumping sequence dependent output. The proposed 2D non-Abelian Thouless pump shows promising applications for robust optical interconnections and optical computing.

Wave patterns of the coupled nonlinear Schrödinger equations in photonic crystal fibers with four-wave mixing

Abstract In this paper, we examine the behavior of modulation instability within photonic crystals. The model employed is the coherent coupled nonlinear Schrödinger equation, incorporating weak birefringence and four-wave mixing, which arises at the edge of the optical mode. The linear analysis is used to derive the modulation instability spectrum. Throughout the modulation instability spectrum, we identify both stable and unstable modes, thereby confirming the breakdown of the plane wave. For certain four-wave mixing parameters, the amplitude of the modulation instability spectrum and its bandwidths expand, creating an opening for localized structures to emerge. Another aspect of this study has been demonstrated in normal and anomalous dispersion regimes where an increasing initial amplitude of the plane wave is fulfilled. Specifically, numerical simulations highlight the occurrence of Benjamin-Feir instability, where wave patterns emerge under the influence of four-wave mixing. Additionally, solitonic waves are generated, demonstrating the presence of Akhmediev breathers and other modulated structures, confirming that photonic crystals with four-wave mixing are conducive to these formations. The findings from this study could inform future research in the development of nonlinear photonic waveguides.

Frequency Division Multiple Access with High Performance Based on Several Defect Resonators According to the Fibonacci Sequence in 1D Photonic Star Waveguide Structure

Frequency Division Multiple Access with High Performance Based on Several Defect Resonators According to the Fibonacci Sequence in 1D Photonic Star Waveguide Structure

On-chip stimulated Brillouin scattering via surface acoustic waves

Surface acoustic wave devices are ubiquitously used for signal processing and filtering, as well as mechanical, chemical, and biological sensing and show promise as quantum transducers. While surface acoustic waves (SAWs) are primarily excited and driven using electromechanical coupling and interdigital transducers, there is a strong desire for novel methods that enable the coherent excitation and detection of SAWs all-optically interfacing with photonic integrated circuits. In this work, we numerically model and experimentally demonstrate SAW excitation in integrated photonic waveguides made from GeAsSe glass via backward stimulated Brillouin scattering (SBS). We measure a Brillouin gain coefficient of 203 W−1 m−1 for the surface acoustic resonance at 3.81 GHz, with a linewidth narrowed to 20 MHz. Experimental access to this new regime of SBS not only opens up opportunities for novel on-chip sensing applications by harnessing the waveguide surface but also paves the way for strong Brillouin interactions in materials lacking sufficient acoustic guidance in the waveguide core, as well as the excitation of SAWs in non-piezoelectric materials.

Dispersion-free characterization of terahertz slab–waveguide modal confinement based on a metal Bragg grating structure

Photonic waveguide structures that use periodic metal grooves and periodically perforated metal slits (PPMSs) can laterally confine Sommerfeld and Zenneck surface waves of metals with the electric field accumulation among metal interspaces in the terahertz (THz) region, instead of the total internal reflection principle of dielectric slab media. For the efficiency enhancements of THz-wave coupling and slab–waveguide confinement, specific integrators with high refractive indices or specified for input angles of transverse magnetic polarized waves, such as prisms, metal blades, and waveguides, are requested to excite spoof surface plasmons in the THz region. However, the integrator-assembled slab–waveguides encounter challenges of THz pulse-wave communication in compact and low-distortion systems. A resonant waveguide grating structure based on PPMSs is experimentally demonstrated to confine THz lateral waves from the plane-wave radiation in free space. The open frame and periodic metal cavities of PPMSs can work as a slab–waveguide to transmit structural confined waveguide modes with forwarding evanescent waves of Fabry–Pérot resonance. For 0.1–1 THz waves, the short wavelengths that are both less than half the metal slit width and 3.75 times the metal thickness can lead to zero dispersion and the highest confinement factor in a slab–waveguide for PPMS-confined THz waves. This behavior is opposite to the high structural dispersion in confined THz waves of surface plasmonic devices.

Bioinspired ultrathin photonic color convertors for highly efficient micro‐light‐emitting diodes

AbstractPixelated color convertor plays an immensely important role in next‐generation display technologies. However, the inherent randomness of light propagation within the convertor presents a formidable challenge to reconcile the huge contradiction between excitation and outcoupling. Here, we demonstrate a bioinspired photonic waveguide pixelated color convertor (BPW‐PCC) to realize directional excitation and outcoupling, which is inspired by an insect visual system. The lens array of BPW‐PCC enables a focusing photonic waveguide that guides the excitation light and converges it on colloidal quantum dots; the directional channel provides a splitting photonic waveguide to enhance the outcoupling of photoluminescence light. Consequently, the excitation and outcoupling efficiency can be simultaneously improved at this judiciously designed pixelated color convertor with a thickness of 50 μm. By this strategy, ultrathin BPW‐PCCs with 4.4‐fold enhanced photoluminescence intensity have been demonstrated in micro‐light‐emitting diode devices and achieved a record‐high luminous efficacy of 1600 lm W−1 mm−1, opening a new avenue for efficient miniaturized displays.

High-Extraction-Rate Ta2O5-Core/SiO2-Clad Photonic Waveguides on Silicon Fabricated by Photolithography-Assisted Chemo-Mechanical Etching (PLACE).

We demonstrate high-extraction-rate Ta2O5-core/SiO2-clad photonic waveguides on silicon fabricated by the photolithography-assisted chemo-mechanical etching technique. Low-confinement waveguides of larger than 70% coupling efficiency with optical fibers and medium propagation loss around 1 dB/cm are investigated in the experiment. Monolithic microring resonators based on Ta2O5 waveguides have shown the quality factors to be above 105 near 1550 nm. The demonstrated Ta2O5 waveguides and their fabrication method hold great promise in various cost-effective applications, such as optical interconnecting and switching.

Asymmetric bi-level dual-core mode converter for high-efficiency and polarization-insensitive O-band fiber-chip edge coupling: breaking the critical size limitation

Abstract Efficient coupling between optical fibers and on-chip photonic waveguides has long been a crucial issue for photonic chips used in various applications. Edge couplers (ECs) based on an inverse taper have seen widespread utilization due to their intrinsic broadband operation. However, it still remains a big challenge to realize polarization-insensitive low-loss ECs working at the O-band (1,260–1,360 nm), mainly due to the strong polarization dependence of the mode coupling/conversion and the difficulty to fabricate the taper tip with an ultra-small feature size. In this paper, a high-efficiency and polarization-insensitive O-band EC is proposed and demonstrated with great advantages that is fully compatible with the current 130-nm-node fabrication processes. By introducing an asymmetric bi-level dual-core mode converter, the fundamental mode confined in the thick core is evanescently coupled to that in the thin core, which has an expanded mode size matched well with the fiber and works well for both TE/TM-polarizations. Particularly, no bi-level junction in the propagation direction is introduced between the thick and thin waveguide sections, thereby breaking the critical limitation of ultra-small feature sizes. The calculated coupling loss is 0.44–0.56/0.48–0.61 dB across the O-band, while achieving 1-dB bandwidths exceeding 340/230 nm for the TE/TM-polarization modes. For the fabricated ECs, the peak coupling loss is ∼0.82 dB with a polarization dependent loss of ∼0.31 dB at the O-band when coupled to a fiber with a mode field diameter of 4 μm. It is expected that this coupling scheme promisingly provides a general solution even for other material platforms, e.g., lithium niobate, silicon nitride and so on.

Deterministic photon source of genuine three-qubit entanglement

Deterministic photon sources allow long-term advancements in quantum optics. A single quantum emitter embedded in a photonic resonator or waveguide may be triggered to emit one photon at a time into a desired optical mode. By coherently controlling a single spin in the emitter, multi-photon entanglement can be realized. We demonstrate a deterministic source of three-qubit entanglement based on a single electron spin trapped in a quantum dot embedded in a planar nanophotonic waveguide. We implement nuclear spin narrowing to increase the spin dephasing time to T2*≃33\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${T}_{2}^{*}\\simeq 33$$\\end{document} ns, which enables high-fidelity coherent optical spin rotations, and realize a spin-echo pulse sequence for sequential generation of spin-photon and spin-photon-photon entanglement. The emitted photons are highly indistinguishable, which is a key requirement for scalability and enables subsequent photon fusions to realize larger entangled states. This work presents a scalable deterministic source of multi-photon entanglement with a clear pathway for further improvements, offering promising applications in photonic quantum computing or quantum networks.

Theoretical design of high-performance guiding and filtering devices using photonic comb-like waveguides with defective resonators

This paper uses the Transfer Matrix Method (TMM) to investigate the transmission rate and the photonic band structure of one-dimensional photonic comb-like waveguides (CWGs) system. This study is crucial as it provides valuable insights into the properties of photonic waveguides, which can be leveraged to design high-performance guiding, filtering and multiplexing devices. The primary objective of our study is to comprehend the impact of defects on the transmission and band structure of CWGs. Specifically, how changes the geometrical and material properties of defective resonators affect defect modes in photonic band gaps. By modifying the relative permittivity and length of these defective resonators, we observed a shift of defect modes to lower frequencies. This work shows, for the first time, the influence of these defects on defect modes and their potential applications in the development of high-performance guidance and electromagnetic filtering devices.

Design and Performance Analysis of Strip Photonic Waveguide with Coating Layer for Multimode Propagation

Introduction: Photonic devices play a pivotal role in the realm of high-speed data communication due to their inherent capability to expedite the transfer of information. Historically, research efforts in this domain have predominantly concentrated on investigating the fundamental mode propagation within photonic waveguides. Methods: This study diverges from the conventional approach by delving into the untapped potential of higher-order modes in addition to the fundamental mode of propagation. The exploration of these higher-order modes opens up new possibilities for optimizing and enhancing the performance of photonic devices in high-speed data communication scenarios. As a distinctive aspect of this study, various coating materials were scrutinized for their impact on both fundamental and higher-order mode propagation. The materials under examination included AlN (aluminum nitride), Germanium, and Silicon. These materials were chosen based on their unique optical properties and suitability for influencing different modes of light propagation. The findings from the study reveal that applying a coating of germanium demonstrates advantageous characteristics, particularly in terms of reduced signal loss, even when considering higher-order modes of propagation within photonic devices. Results: In this context, the results indicate that germanium-coated waveguides exhibit notably low propagation losses, with measurements as minimal as 0.25 dB/cm. This low level of loss is particularly noteworthy, especially when the waveguide has a width of 550 nm and is coated with a thickness of 50 nm. The dimensions and coating specifications play a crucial role in determining the efficiency of light transmission within the waveguide. Conclusion: The fact that the propagation loss is substantially low under these conditions suggests that the germanium-coated waveguide, even when considering higher-order modes of light propagation, can effectively maintain the integrity of the optical signal.

Two Frequency-Division Demultiplexing Using Photonic Waveguides by the Presence of Two Geometric Defects

Two Frequency-Division Demultiplexing Using Photonic Waveguides by the Presence of Two Geometric Defects

Grating Coupler Design for Low-Cost Fabrication in Amorphous Silicon Photonic Integrated Circuits

Photonic circuits find applications in biomedicine, manufacturing, quantum computing and communications. Photonic waveguides are crucial components, typically having cross-section orders of magnitude inferior when compared with other photonic components (e.g., optical fibers, light sources and photodetectors). Several light-coupling methods exist, consisting of either on-plane (e.g., adiabatic and end-fire coupling) or off-plane methods (e.g., grating and vertical couplers). The grating coupler is a versatile light-transference technique which can be tested at wafer level, not requiring specific fiber terminations or additional optical components, like lenses, polarizers or prisms. This study focuses on fully-etched grating couplers without a bottom reflector, made from hydrogenated amorphous silicon (a-Si:H), deposited over a silica substrate. Different coupler designs were tested, and of these we highlight two: the superimposition of two lithographic masks with different periods and an offset between them to create a random distribution and a technique based on the quadratic refractive-index variation along the device’s length. Results were obtained by 2D-FDTD simulation. The designed grating couplers achieve coupling efficiencies for the TE-like mode over −8 dB (mask overlap) and −3 dB (quadratic variation), at a wavelength of 1550 nm. The coupling scheme considers a 220 nm a-Si:H waveguide and an SMF-28 optical fiber.

Dynamical theory of single-photon transport through a qubit chain coupled to a one-dimensional nanophotonic waveguide

We study the dynamics of a single-photon pulse traveling through a linear qubit chain coupled to continuum modes in a one-dimensional (1D) photonic waveguide. We derive a time-dependent dynamical theory for qubits’ amplitudes and for transmitted and reflected spectra. We show that the requirement for the photon-qubit coupling to exist only for positive frequencies can significantly change the dynamics of the system. First, it leads to the additional photon-mediated dipole-dipole interaction between qubits which results in the violation of the phase coherence between them. Second, the spectral lines of transmitted and reflected spectra crucially depend on the shape of the incident pulse and on the initial distance between the pulse center and the first qubit in the chain. We apply our theory to one-qubit and two-qubit systems. For these cases we obtain the explicit expressions for the qubits’ amplitudes and for the photon radiation spectra as time tends to infinity. Specific calculations are performed for superconducting qubits operating in GHz frequency range. For the incident Gaussian wave packet we calculate the line shapes of transmitted and reflected photons.

Efficient THz wave generation through intermodal four-wave mixing in the Ge waveguides with different geometries

ABSTRACT Intermodal four-wave mixing (FWM) in photonic waveguides offers a promising approach for efficient terahertz (THz) wave generation, crucial for advanced photonic systems. This study explores the potential of germanium (Ge) waveguides, leveraging their distinct dispersion profiles in transverse electric (TE), and transverse magnetic (TM) modes to achieve phase-matching for FWM. We conducted a numerical analysis of two waveguide geometries, ridge and plane, to optimize THz generation efficiency. Also, by optimizing waveguide geometry, it is possible to achieve higher conversion efficiency and broader THz bandwidth. The results demonstrate that Ge waveguides, particularly when utilizing same-phase laser pulses, can significantly enhance THz radiation and exhibit lower losses compared to traditional silicon-based designs. The findings suggest that integrating these optimized Ge waveguides with existing photonic components could lead to more versatile and efficient THz systems.

Past, present, and future of hybrid plasmonic waveguides for photonics integrated circuits

This article addresses the past, present, and future status of hybrid plasmonic waveguides (HPWs). It presents a comprehensive review of HPW-based photonic integrated circuits (PICs), covering both passive and active devices, as well as potential application of on-chip HPW-based devices. HPW-based integrated circuits (HPWICs) are compatible with complementary metal oxide semiconductor technology, and their matched refractive indices enables the adaptation of existing fabrication processes for silicon-on-insulator designs. HPWs combine plasmonic and photonic waveguide components to provide strong confinement with longer propagation length Lp of HP modes with nominal losses. These HPWs are able to make a trade-off between low loss and longer Lp, which is not possible with independent plasmonic and photonic waveguide components owing to their inability to simultaneously achieve low propagation loss with rapid and effective all-optical functionality. With HPWs, it is possible to overcome challenges such as high Ohmic losses and enhance the functional performance of PICs through the use of multiple discrete components. HPWs have been employed not only to guide transverse magnetic modes but also for optical beam manipulation, wireless optical communication, filtering, computation, sensing of bending, optical signal emission, and splitting. They also have the potential to play a pivotal role in optical communication systems for quantum computing and within data centers. At present, HPW-based PICs are poised to transform wireless chip-to-chip communication, a number of areas of biomedical science, machine learning, and artificial intelligence, as well as enabling the creation of densely integrated circuits and highly compact photonic devices.

(Invited) Photoluminescence Properties of Single InAsP Quantum Dots Embedded in InP Nanowires

Non-classical light emitters that can generate single photons with a negligible multiphoton probability are one of the key components for quantum information technologies. Deterministically grown III-V semiconductor nanowires containing quantum dots are gaining interest as a viable platform for quantum key distribution applications. In this talk, we will report on our recent development of the fabrication of InAsP single quantum dots embedded within InP photonic waveguide nanowires. In particular, we outline the importance of the photonic waveguide design for optimum photon generation and coupling to external optics [1]. The measured count rate dependence on normalized wire diameter, D/λ (figure 1) of the nanowire sources is consistent with calculations of the spontaneous emission rate into the fundamental HE11 nanowire waveguide mode (ΓHE11). Manipulating dot growth conditions and engineering the band structure around the dot (dot-in-a-rod configuration) are applied [2] to enhance the photoluminescence emission rate at 1310 nm and 1550 nm. Single photon emission with very low multiple photon probability is demonstrated at O- and C-band [3,4]. Temperature dependent, second-order correlation measurements on the 1310 nm source show that these nanowire sources can generate single photons up to temperatures of 220 K [3].[1] S. Haffouz, et al., Nano Letters, 18, 3047 (2018).[2] S. Haffouz, et al., Applied Physics Letters, 117, 113101 (2020).[3] P. Laferriére, et al., Nano Letters, 23, 962 (2023).[4] A.N. Wakileh, et al., arXiv:2309.13381 (2023). Figure 1