Photonic Crystal Surface-emitting Lasers Research Articles

Laterally coupled photonic crystal surface emitting laser arrays

We propose and investigate a novel coherent laser array design based on laterally coupled photonic crystal surface-emitting lasers (PCSELs). As a new type of semiconductor laser technology, PCSELs have field confinement in a planar cavity and laser beam emission in the surface normal direction. By engineering lateral couplings between PCSELs with heterostructure photonic crystal designs, we can achieve coherent operations from an array of PCSELs. In this paper, we demonstrate coherent operation from a passively coupled PCSEL array design. We fabricated PCSEL array devices on a GaAs-based quantum well heterostructure at a target wavelength of 1040 nm. Experimental results show that the 2-by-2 PCSEL arrays have spectral linewidth of 0.14–0.22 nm. Beam combining performance was characterized by self-interference experiments. Similar coherency between the PCSEL array and single PCSEL device was observed. Our compact PCSEL array designs by passive lateral coupling have potential applications in fields of on-chip photonic computing, quantum, and information processing.

High-power, stable single-mode CW operation of 1550 nm wavelength InP-based photonic-crystal surface-emitting lasers

1550 nm wavelength photonic-crystal surface-emitting lasers (PCSELs) are attractive for optical communication and eye-safe sensing applications. In this study, we present InP-based PCSELs featuring a double-lattice photonic-crystal structure designed for high-power single-mode operation at a wavelength of 1550 nm. These PCSELs demonstrate output powers exceeding 300 mW under continuous-wave conditions at 25 °C. Additionally, highly stable single-mode oscillation with a side-mode suppression ratio of over 60 dB is verified at temperatures from 15 °C to 60 °C. Measurement and simulation of photonic band structures reveal the impacts of the threshold gain margin and optical coupling coefficient on the single-mode stability.

Optimal waveguide structure for low-threshold InGaN/GaN-based photonic-crystal surface-emitting lasers

We analyzed the optimal waveguide structure of two types of InGaN-based photonic crystal surface-emitting lasers (PCSELs) to suppress the coupling with leaky modes via mode simulations. To minimize the threshold material gain (gth), we calculated the confinement factor and quality factor of PCSELs with varying waveguide layer thicknesses in the separate confinement heterostructure (SCH) layer. The optical mode intensity profile revealed the coupling between the fundamental mode of SCH and parasitic leaky modes in the cladding layer or substrate as the primary root cause of the low-quality factor and high threshold gain of PCSELs. The asymmetric nature of the SCH structure yielded the optimal waveguide structure to be dependent on the position of the air holes. With a proper waveguide thickness and air hole depth, the optimized threshold modal gain of PCSELs with the n-side air holes can be less than 30 cm−1.

Optical Mode Calculation in Large-Area Photonic Crystal Surface-Emitting Lasers

Optical Mode Calculation in Large-Area Photonic Crystal Surface-Emitting Lasers

High-power and high-efficiency operation of 1.3 µm-wavelength InP-based photonic-crystal surface-emitting lasers with metal reflector.

We demonstrate high-output-power and high-efficiency operation of 1.3-µm-wavelength InP-based photonic-crystal surface-emitting lasers (PCSELs). By introducing a metal reflector and adjusting the phase of the reflected light via optimization of the thickness of the p-InP cladding layer, we successfully achieve an output power of approximately 400 mW with the slope efficiency of 0.4 W/A and the wall-plug efficiency of 20% under CW conditions. In addition, this PCSEL exhibits a narrow circular beam with a divergence angle below 1.6° even at high output powers under CW conditions at temperatures from 15°C to 50°C. We have also demonstrated an output power of over 12 W under pulsed conditions at room temperature.

Demonstration of high-power photonic-crystal surface-emitting lasers with 1-kHz-class intrinsic linewidths: erratum

Demonstration of high-power photonic-crystal surface-emitting lasers with 1-kHz-class intrinsic linewidths: erratum

Demonstration of high-power photonic-crystal surface-emitting lasers with 1-kHz-class intrinsic linewidths

Photonic-crystal surface-emitting lasers (PCSELs) are capable of single-mode, high-power lasing over a large resonator area owing to two-dimensional resonance at a singularity point of the photonic band structure. Since the number of photons in the lasing mode in PCSELs are much larger than those in conventional semiconductor lasers, PCSELs are in principle suitable for coherent operation with a narrow spectral linewidth. In this paper, we numerically and experimentally investigate intrinsic spectral linewidths of 1-mm-diameter PCSELs under continuous-wave (CW) operation, and we demonstrate CW operation with 1-kHz-class intrinsic linewidths and 5-W-class output power.

High-order optical vortex beam generation based on watt-class spatial phase plate-integrated photonic-crystal surface-emitting lasers.

We develop spatial phase plate (SPP)-integrated photonic-crystal surface-emitting lasers featuring double-lattice photonic-crystal structures embedded using a crystal regrowth technique. SPPs possessing eight segmentations per phase rotation number l are fabricated on the top surface to generate optical vortex beams (OVBs) with l = 1-3. The beams exhibit a high output power of ∼5 W and high mode purities of 85%, 78%, and 72% for l = 1-3, respectively. These purity values are comparable with those of a pure Gaussian mode passing through an SPP. The compact, high-power, and high-purity OVB sources can be used in the fields of material processing, optical manipulation, and microscopy.

High-Power Terahertz Photonic Crystal Surface-Emitting Laser with High Beam Quality

The photonic crystal surface-emitting laser (PCSEL) has attracted much attention due to the advantages of a small far-field divergence angle and high output power. Here, we report a high-power terahertz (THz) photonic crystal laser with high beam quality through the optimization of the absorption boundary condition and the introduction of the symmetrically distributed electrodes. Single-mode surface emission at 3.4 THz with the maximum peak output power of 50 mW is demonstrated. Meanwhile, a high symmetric far-field pattern with C6 symmetry and a small divergence angle is achieved. In this device, the integration of the stable single-mode operation, high beam quality and high output power is realized, which may have great significance for practical applications.

Continuous-wave operation of 1550 nm low-threshold triple-lattice photonic-crystal surface-emitting lasers.

Benefitting from narrow beam divergence, photonic crystal surface-emitting lasers are expected to play an essential role in the ever-growing fields of optical communication and light detection and ranging. Lasers operating with 1.55 μm wavelengths have attracted particular attention due to their minimum fiber loss and high eye-safe threshold. However, high interband absorption significantly decreases their performance at this 1.55 μm wavelength. Therefore, stronger optical feedback is needed to reduce their threshold and thus improve the output power. Toward this goal, photonic-crystal resonators with deep holes and high dielectric contrast are often used. Nevertheless, the relevant techniques for high-contrast photonic crystals inevitably complicate fabrication and reduce the final yield. In this paper, we demonstrate the first continuous-wave operation of 1.55 μm photonic-crystal surface-emitting lasers by using a 'triple-lattice photonic-crystal resonator', which superimposes three lattice point groups to increase the strength of in-plane optical feedback. Using this geometry, the in-plane 180° coupling can be enhanced threefold compared to the normal single-lattice structure. Detailed theoretical and experimental investigations demonstrate the much lower threshold current density of this structure compared to 'single-lattice' and 'double-lattice' photonic-crystal resonators, verifying our design principles. Our findings provide a new strategy for photonic crystal laser miniaturization, which is crucial for realizing their use in future high-speed applications.

Mixed-mode-state control of photonic-crystal lasers under CW operation

Mixed-mode-state control of lasers under continuous-wave (CW) operation, where multi-physics interactions among carriers, photons, and heat are involved, is important for realizing desired lasing characteristics, as well as for dynamic control of lasers. In this paper, we demonstrate mixed-mode-state control of a photonic-crystal surface-emitting laser (PCSEL) under CW operation by manipulating its current injection distribution. To control the current injection distribution, we introduce a multiple-electrode matrix into the p-side of the PCSEL, and we bond the PCSEL to a heatsink in the p-side-down-configuration to dissipate heat while also enabling current injection via each p-side electrode. Furthermore, we employ a convolutional neural network (CNN) to correlate the current distributions and the far-field patterns (FFPs) corresponding to the mode states, and to predict the current distributions necessary to obtain targeted FFPs. FFPs resembling the targeted ones with high fidelity (90%) are obtained by using the constructed CNN. These results lead to the realization of next-generation smart CW lasers capable of mixed-mode-state control even in a dynamic environment, which are essential for applications such as advanced material processing and even aerospace.

Metasurface- and PCSEL-Based Structured Light for Monocular Depth Perception and Facial Recognition.

The novel depth-sensing system presented here revolutionizes structured light (SL) technology by employing metasurfaces and photonic crystal surface-emitting lasers (PCSELs) for efficient facial recognition in monocular depth-sensing. Unlike conventional dot projectors relying on diffractive optical elements (DOEs) and collimators, our system projects approximately 45,700 infrared dots from a compact 297-μm-dimention metasurface, drastically more spots (1.43 times) and smaller (233 times) than the DOE-based dot projector in an iPhone. With a measured field-of-view (FOV) of 158° and a 0.611° dot sampling angle, the system is lens-free and lightweight and boasts lower power consumption than vertical-cavity surface-emitting laser (VCSEL) arrays, resulting in a 5-10 times reduction in power. Utilizing a GaAs-based metasurface and a simplified optical architecture, this innovation not only addresses the drawbacks of traditional SL depth-sensing but also opens avenues for compact integration into wearable devices, offering remarkable advantages in size, power efficiency, and potential for widespread adoption.

Green-wavelength GaN-based photonic-crystal surface-emitting lasers

Visible-wavelength GaN-based photonic-crystal surface-emitting lasers (PCSELs) have attracted attention for various applications, such as materials processing, high-brightness illuminations, and displays. In this letter, we demonstrate GaN-based PCSELs at green wavelengths. We formed a photonic crystal (PC) in p-GaN and filled holes of the PC with SiO2 to ensure device stability. Through a current injection test under pulsed conditions and spectral analysis, we confirmed that the fabricated device possessed Γ-point single-mode oscillation at wavelengths above 505 nm. Our results have the potential to further expand the applications of PCSELs and semiconductor lasers in visible region.

Research Progress on High-speed Photonic Crystal Surface-emitting Lasers

Research Progress on High-speed Photonic Crystal Surface-emitting Lasers

Low-threshold single-mode nanowire array flat-band photonic-crystal surface-emitting lasers with high-reflectivity bottom mirrors.

A Si-based nanowire array photonic-crystal surface-emitting laser based on a flat band is designed and simulated. By introducing an air gap between the nanowire and substrate, the bottom reflectivity is significantly enhanced, resulting in much lower threshold and smaller cutoff diameter. Through adjusting the lattice constant (the distance between neighboring nanowires) and nanowire diameter, a photonic crystal structure with a flat band is achieved, in which strong interaction between light and matter occurs in the flat band mode. For the device with a small size, single-mode lasing is obtained with a side-mode suppression ratio of 21 dB, high quality factor of 3940, low threshold gain of 624 cm-1, and small beam divergency angle of ∼7.5°. This work may pave the way for the development of high-performance Si-based surface-emitting nanolasers and high-density photonic integrated circuits.

Design of double-lattice GaN-PCSEL based on triangular and circular holes.

We have theoretically designed a double-lattice photonic crystal surface-emitting laser (PCSEL) based on triangular and circular holes. In the design, porous-GaN which has the properties of lower refractive index and high quality stress-free homo-epitaxy with GaN, was first proposed to be the cladding layer for GaN-PCSEL. The finite difference-time domain (FDTD), the plane wave expansion (PWE), and the rigorous coupled-wave analysis (RCWA) method were employed in the investigation. Our simulations achieved a radiation constant of up to 50 cm-1 and a slope efficiency of more than 1 W/A while maintaining a low threshold gain. We conducted a systematic study on the effects of the filling factor, etching depth, and holes shift, on the performance of the PCSEL. The findings indicate that increasing the filling factor improves the radiation constant and slope efficiency. Asymmetric hole patterns and varying etching depths have a similar effect. The introduction of asymmetric patterns and a double lattice in the photonic crystal breaks the symmetry of electric fields in the plane, while different etching depths of the two holes break the symmetry in the vertical direction. Additionally, altering the shift of the double lattice modifies the optical feedback in the resonators, resulting in variations of cavity loss and confinement factor.

High-power and high-beam-quality photonic-crystal surface-emitting lasers: a tutorial

Realization of single-mode, high-power and high-beam-quality (namely, high-brightness) semiconductor lasers, which can rival or even replace bulky lasers such as gas, solid, and fiber lasers, is one of the ultimate goals of laser physics and photonics. The demand for such ultimate single-mode high-brightness semiconductor lasers is increasing for a wide variety of emerging applications including next-generation remote sensing for smart mobility and high-precision laser processing for smart manufacturing. Photonic-crystal surface-emitting lasers (PCSELs) show promise to meet these demands, based on their broad-area coherent two-dimensional (2D) resonance at a singularity (Γ) point of their 2D photonic band structure. In this tutorial paper, the lasing principle, theoretical analysis, and experimental demonstration of PCSELs are described. Recent progress in PCSEL development, including the formulation of a design guideline for realizing 100-W-to-kW-class single-mode operation, the experimental demonstration of a brightness of 1 GW cm–2 sr–1, and an extension of the lasing wavelengths to telecommunication and mid-infrared wavelengths are also covered.

Metasurface-driven polarization-division multiplexing of PCSEL for optical communications

Free-space optical communications hold promising advantages, including a large bandwidth, access to license-free spectrum, high data rates, quick and simple deployment, low power consumption, and relaxed quality requirements. Nevertheless, key technical challenges remain, such as a higher transmission efficiency, a lower transmission loss, and a smaller form factor of optical systems. Here, we demonstrate the viability of circular-polarization-multiplexed multi-channel optical communication using metasurfaces alongside a photonic-crystal surface-emitting laser (PCSEL) light source at wavelength of 940 nm. Through the light manipulation with metasurface, we split the linearly polarized incidence into left and right circular polarizations with desired diffraction angles. Such orthogonal polarization states provide a paradigm of polarization division multiplexing technique for light communication. The PCSEL light source maintains a low divergence angle of about 0.373 degrees after passing through an ultra-thin metasurface without further bulky collimator or light guide, making end-to-end (E2E) and device-to-device (D2D) communications available in a compact form. Both light source and modulated polarized light exhibit a − 3 dB bandwidth over 500 MHz, with successful 1 Gbit/s transmission demonstrated in eye diagrams. Our results affirm that metasurface effectively boosts transmission capacity without compromising the light source's inherent properties. Future metasurface designs could expand channel capacity, and its integration with PCSEL monolithically holds promise for reducing interface losses, thereby enhancing efficiency.

Recent Advances in Light Detection and Ranging: Optical Modulation Solutions and Novel Nanotechnologies

AbstractLight detection and ranging (LiDAR) sensor is widely recognized as a critical component for accurate perception. However, there are a host of challenges that impede their performance, including low spatial resolution, high costs, large size, low reliability, and susceptibility to interference. It is challenging to overcome these issues using a single LiDAR module, necessitating the need for a review of current LiDAR technologies. The paper commences by introducing the fundamental principles of various laser rangefinders and discussing the optical modulation technologies used to prevent interference and ghost images. Next, the paper delves into the latest developments in laser technology, with a focus on enhancing the switching rate, compliance with eye safety regulations, miniaturization, and improving stability. One highly promising innovation is the photonic crystal surface emitting laser (PCSEL), a novel light source that boasts high‐speed, small divergence angles, and high‐power output. Finally, the paper discusses the advancements made in non‐solid‐state scanning and solid‐state scanning, such as improving stability, increasing scanning angles, and optimizing the manufacturing of mechanical and micro‐electromechanical systems (MEMS). Additionally, the paper highlights the recent advancements in nanotechnology, specifically metasurface technology, which offers superior capabilities such as beam deflection, enhanced field‐of‐view (FOV), and dynamic modulation.

Design of low-threshold photonic-crystal surface-emitting lasers with confined gain regions by using selective area intermixing

Photonic-crystal surface-emitting lasers have many promising properties over traditional semiconductor lasers and are regarded as the next-generation laser sources. However, the minimum achievable lasing threshold of PCSELs is still several times larger than that of VCSELs, and limiting its applications especially if the required power is small. Here, we propose a new design that reduces the gain region in the lateral plane by using selective quantum-well intermixing to reduce the threshold current of PCSELs. By performing theoretical calculations, we confirmed that the threshold current can be lowered by a factor of two to three while keeping the PCSEL’s advantage of small divergence angle.