Design Of Photonic Crystal Fiber Research Articles

Design and optimization of a terahertz photonic crystal fiber based biosensor to detect malaria disease

Design and optimization of a terahertz photonic crystal fiber based biosensor to detect malaria disease

Design of simple circular photonic crystal fiber having ultra-large negative dispersion and high birefringence for dispersion compensation

Design of simple circular photonic crystal fiber having ultra-large negative dispersion and high birefringence for dispersion compensation

Retraction Note: Design of circular photonic crystal fiber for OAM extraction SDM applications

Retraction Note: Design of circular photonic crystal fiber for OAM extraction SDM applications

Supercontinuum generation in Ga‐Sb‐S chalcogenide‐based PCF using optofluidic approach

AbstractWe report the design and theoretical study of a Ga‐Sb‐S chalcogenide glass‐based photonic crystal fiber (PCF) structure for mid‐infrared supercontinuum generation. The proposed design is engineered by adjusting the diameter of air holes in the cladding region and pitch, giving us control over the dispersion characteristics of the fiber. The optimized structure design offers the Zero Dispersion Wavelength of 5.2 μm. When pumped with 50 fs secant hyperbolic pulses of peak power 4.9 kW, for a fiber of length 8 mm at pump wavelength of 5 μm, the proposed structure design produces an ultra‐broadband supercontinuum spectrum spanning 1.5–14 μm. Proposed PCF design should be helpful in, biomedical imaging, supercontinuum sources, biosesning, and optical coherence tomography.

Design and theoretical study of rectangular photonic crystal fiber based sensor for chemical sensing in terahertz regime

Design and theoretical study of rectangular photonic crystal fiber based sensor for chemical sensing in terahertz regime

Design and development of photonic crystal fiber for application of milk purity detection: an approach of performance analysis

Design and development of photonic crystal fiber for application of milk purity detection: an approach of performance analysis

Design and analysis of the C6H6-filled circular photonic crystal fiber with ultra-flat dispersion for broadband supercontinuum generation with peak power of 130 W and 250 W

This article introduces a new model of a circular silica-based photonic crystal fiber with a hollow core filled with C6H6. The difference in the air hole size and the distance between them in the first ring around the core has a profound effect on the dispersion, leading to ultra-flat dispersion with values as low as ±0.996 ps nm−1· km in wavelength range 0.74 µm. The high nonlinear coefficient of several 1000 W−1 · km−1 and the low confinement loss of a few tens of dB m−1 suggest proposing three fibers with dispersion and nonlinear properties suitable for broadband supercontinuum generation at low peak power. The influence of peak power on the broadening of the supercontinuum spectrum is also investigated. Fibers with a flat all-normal dispersion profile provide a smooth spectrum with bandwidths of 1.215 and 1.626 µm at 30 dB with a peak power of 250 W. A fiber with an anomalous dispersion regime generates a supercontinuous spectrum, broadening to 3.868 µm in the mid-infrared region (2.467 µm bandwidth at 30 dB) under laser pulse excitation with 130 W peak power. Our results provide further insights into the generation of broadband mid-infrared supercontinuum using liquid-core silica-fibers, which have great potential for applications in the fields of optical communications and optical sensing.

High birefringence low loss nearly zero flat dispersion similar to slotted core photonic crystal fibers

Abstract Studying high-performance photonic crystal fibers (PCF) is of significant scientific importance for terahertz (THz) waveguide systems. This study introduces a novel PCF design with a core composed of the smallest sub-wavelength units resembling a slotted structure, aiming to achieve high birefringence and low loss. The optical properties of the proposed PCF are analyzed through simulations, yielding impressive results. The PCF exhibits an ultra-high birefringence of 0.07848, a minimum limiting loss of 10−17 dB/cm, and an effective material loss as low as 0.04251 cm−1. Moreover, it demonstrates near-zero flat dispersion of −0.012 ± 0.074 ps/THz/cm over a broad frequency range of 1.2–2.2 THz. This fiber stands out by not only providing high birefringence but also by striking an optimal balance among birefringence, transmission loss, and dispersion for THz waveguides. The implications of this work are profound for the development of THz communication systems, THz polarization-maintaining transmission, and sensing applications. Furthermore, it established an important benchmark for the design of THz-PCFs that prioritize high birefringence, low loss, and near-zero flat dispersion, offering an essential reference for future research and development in this field.

Design of photonic crystal fiber supporting 190 orbital angular momentum modes with low nonlinearity coefficient

A new photonic crystal fiber is proposed for the transmission of more orbital angular momentum modes with a rectangular air hole arrangement to increase the cladding air-filling rate. The results reveal that the fiber can support 190 orbital angular momentum modes in the C+L band, with the topological charge ordering up to 48, and the effective refractive index difference between adjacent eigenmodes is above 10−3. The effective mode area of all the eigenmodes is larger than 208.02 μm2, the nonlinearity coefficient is less than 0.43 W−1∙km−1, the confinement loss reaches up to 10−12-10−8 dB/m, the dispersion is flat and the minimum dispersion change is 3.15 ps∙nm−1∙km−1, with mode purity greater than 97.4%. Compared to existing typical orbital angular momentum transmission photonic crystal fibers, this fiber can support more orbital angular momentum modes for most purposes with lower nonlinearity coefficient, higher mode purity, better propagation characteristics but simpler structure. The highest nonlinearity coefficient is reduced by at least 0.3 W−1∙km−1 compared to existing typical orbital angular momentum transmission photonic crystal fibers. The effect of fabrication errors on the transmission quality of orbital angular momentum modes is also discussed, and the results reveal that the effect on mode transmission quality is small at 1–2% variations of air holes. Therefore, this photonic crystal fiber is promising in high-capacity communication systems.

Design of uncomplicated triangular core PCF for enhanced non-linearity applications

An innovative design of Photonic Crystal Fibre (PCF) for enhanced non-linearity applications using simulation with the Finite Element Method (FEM) is presented. The PCF is a kind of fibre optic waveguide that has air-holes along the entire length of the optical fibre, which exploits its exclusive features of being continuously single-moded and having a modifiable spot-size and dispersion properties for various linear and non-linear applications. This proposed triangular core PCF is made of silica material with a refractive index of 1.445 and features three large air-holes placed 120° apart in the core, each with a refractive index of 1.00. The air-holes have a pitch length of 6.03 μm and a radius of 2.86 μm, and the wavelength of operation is 1.55 μm. The proposed PCF design has a large diameter to pitch ratio (d/Λ) of up to 0.95, resulting in a reduced spot-size of just above 1.00 μm2. This indicates that the proposed triangular core PCF design could be used to enhance non-linearity applications. This study introduces a novel structure that simplifies construction by employing three strategically positioned large air-holes in the cladding, thus achieving the necessary properties for guiding light through the core. This streamlined approach overcomes complexities associated with previous designs from the literature, hence, offering a practical solution for effective light guidance while minimising construction difficulties. This inventive proposed PCF design can be fabricated using the Stack and Draw process or the slurry casting method.

Design and simulation of photonic crystal fiber for highly sensitive chemical sensing applications

AbstractPhotonic crystal fibers (PCF) have demonstrated promising capabilities for liquid sensing applications owing to their distinctive optical properties. This work presents a numerical investigation of a PCF sensor optimized for discriminating water, ethanol, and benzene samples. In the proposed configuration, there are five concentric rings of air holes in the cladding arranged in a hybrid lattice structure, while the core contains only one air hole. The optical properties of the sensor, such as refractive index, power fraction, relative sensitivity, confinement loss, effective area, and nonlinearity, were assessed through a comprehensive analysis utilizing the full vector Finite Element Method within the COMSOL Multiphysics software. All these properties have been meticulously examined through numerical investigation across a broader range of wavelengths spanning from 0.8 to 2.2 µm. The suggested model has high sensitivity, minimal confinement loss, and an exceptional nonlinear coefficient value. At a wavelength of 1.3 µm, the suggested PCF exhibits greater sensitivity of 96.84, 98.12, and 100% for water, ethanol, and benzene, respectively, and nonlinear coefficients of 13.98 W−1km−1for water, 13.93 W−1km−1for ethanol, and 14.85 W−1km−1for benzene, with decreased confinement loss. The created model can be utilized in several research areas, particularly in chemical sensing and bio-sensing, as well as their respective applications.

A grating-modified broadband D-type photonic crystal fiber polarization filter

In this paper, a D-type grating-modified broadband photonic crystal fiber polarization filter based on surface plasmon resonance is proposed. The asymmetric design of D-type photonic crystal fiber is helpful to achieve single-mode polarization filtering, and grating can increase the coupling between the core mode and the SPP mode and thus increase the constraint loss. From our simulation results, it can be seen that the applicable bandwidth range can easily reach 1 μm. At the communication wavelength of 1750 nm, the calculated constraint losses of x-polarized and y-polarized core modes are 4.2526 dB cm−1 and 1491.8 dB cm−1, respectively, and the crosstalk is up to 1292 dB. The proposed grating-modified of photonic crystal fiber has achieved good filtering effect in the near-infrared band, and even extended to the mid-infrared band.

Design of THz photonic crystal fiber based biosensor for detection of brain tissues and behavior characterization with Machine learning approach

Design of THz photonic crystal fiber based biosensor for detection of brain tissues and behavior characterization with Machine learning approach

Design of porous-core photonic crystal fiber based on machine learning approach

Design of porous-core photonic crystal fiber based on machine learning approach

Design and analysis of spider-web photonic crystal fiber in the terahertz regime

Design and analysis of spider-web photonic crystal fiber in the terahertz regime

Numerical Analysis of a Photonic Crystal Fiber‐Based Biosensor for the Detection ofVibrio choleraandEscherichia coliBacteria in the THz Regime

To ensure good water quality, microbiological contamination in water must be detected. This process is made easier and more distinctive using a photonic crystal fiber (PCF), which offers outstanding optical sensing capabilities. Herein, a PCF sensor model is proposed for detecting two types of waterborne bacteria, namely,Vibrio cholera and Escherichia colibacteria. The core region of the proposed PCF sensor is made up of a single rectangle and the cladding region has 32 rectangular air holes that have the same height and width as the core rectangle. Zeonex is employed as the fiber material. Using Comsol 5.6 which is based on the finite‐element method, the model is numerically analyzed and structured. The simulation verifies the effectiveness of the proposed PCF to detect the analyte samples. Numerous performance indicators are calculated at an operating 2.8 THz. Simulation results show that the proposed PCF sensor is promising. Extremely high relative sensitivity (97.996%), lower effective area (6.3575 × 104 μm2), higher numerical aperture (0.23319), lower effective material loss (0.0034 cm−1), and lower confinement loss (0.1 × 10−14) are obtained which indicate an efficient PCF sensor. Additionally, the simplicity of the PCF design ensures the fabrication possibilities of the proposed sensor.

Design of a multi-core photonic crystal fiber supporting 518 OAM modes

A multi-ring core photonic crystal fiber (PCF) with seven high-index ring regions is designed for the transmission of multiple orbital angular momentum (OAM) modes. The new structure which has an optimized air hole arrangement shows improved transmission quantity and number of OAM modes. Numerical analysis reveals that the PCF can transmit 518 OAM modes in the range of 1.4–1.75 µm stably while avoiding cross talk from the adjacent ring core resulting in a low cross talk of merely −208.5dB, confinement loss less than 10−9dB/m, as well as mode quality greater than 0.925. The results disclose a new method to increase the communication capacity and suggest that the PCF has great application potential.

THz dual-core liquid photonic crystal fiber with high negative dispersion

A novel photonic crystal fiber (PCF) design is proposed and analyzed with highly negative dispersion for THz applications. The reported PCF has TOPAS background material due to its low material loss in THz regime. Further, dual porous cores are constructed and selectively infiltrated with liquid crystal (LC) material to control the dispersion characteristics of the reported PCF. The basic operation of the suggested dual core LCPCF (DC-LCPCF) depends on the optical coupling between the supported modes of the two porous core regions in the THz regime to achieve high negative dispersion for the two fundamental polarizations: transverse electric (TE) and transverse magnetic (TM). The coupling can be switched between the TE and TM modes by applying an external electric field on the LC material via two metallic electrodes. The full vectorial finite element method (FVFEM) is utilized to study the dispersion characteristics of the DC-LCPCF structure. The obtained results reveal that the TE and TM modes have large negative chromatic dispersions of − 44.57 ps/THz/cm and − 30.59 ps/THz/cm at frequencies of 0.386 THz and 0.4027 THz, respectively. So, it will be a solution for further innovation of fiber devices in the THz regime.

Experimental studies on the core-structure dependence of backward Brillouin gain in solid-core photonic crystal fibers.

Stimulated Brillouin scattering (SBS) in solid-core photonic crystal fibers (PCFs) differs significantly from that in standard optical fibers due to the tight confinement of both optical and acoustic fields in their µm-sized fiber cores, as resultantly evident in their Brillouin gain spectra. Despite many theoretical studies based on either simplified models or numerical simulations, the structural dependency of Brillouin gain spectra in small-core PCFs has not been characterized comprehensively using PCFs with elaborated parameter controls. In this work we report a comprehensive characterization on the core-structure dependences of backward SBS effects in solid-core PCFs that are drawn with systematically varied core-diameter, revealing several key trends of the fiber Brillouin spectrum in terms of its gain magnitude, Brillouin shift and multi-peak structure, which have not been reported in detail previously. Our work provides some practical guidance on PCF design for potential applications like Brillouin fiber lasers and Brillouin fiber sensing.

Design of hexagonal photonic crystal fiber with Ge10As22Se68 chalcogenide core and As2S3 cladding for mid-infrared supercontinuum generation

Design of hexagonal photonic crystal fiber with Ge10As22Se68 chalcogenide core and As2S3 cladding for mid-infrared supercontinuum generation