Photoionization Mass Spectrometry Research Articles

Characterizing carbonaceous aerosols in residential coal combustion: Insights from thermal/spectral carbon analyzer coupled with photoionization mass spectrometry analysis

This study aims to identify unique signatures from residential coal combustion in China across various combustion conditions and coal types. Using a Thermal/Spectral Carbon Analyzer with a Photoionization Time-of-Flight Mass Spectrometer (TSCA-PI-TOF-MS), we focus on the optical properties and organic mass spectra of the emissions. Bituminous coal emerged as the primary emitter of total carbon, releasing 729 μg C/mg PM2.5 under smoldering and 894 μg C/mg PM2.5 under flaming. Carbon fractions mainly comprised OC1 and OC2, except for anthracite's dominance of EC1 under smoldering. Pyrolysis carbon absorption shifted from 405, 445 and 532 nm during smoldering to near-infrared bands (635–980 nm) during flaming for both bituminous and anthracite coal. Conversely, clean coal exhibited an inverse trend, attributed to additives enhancing oxygen-containing organic compounds and long-chain hydrocarbons released in charring process. Sample of bituminous coal began charring at OC3 step, while anthracite began earlier at OC2 step, particularly pronounced under flaming. Clean coal displayed unconventional charring at OC1 step under smoldering condition, producing signature compounds like butenal, methylfuran, furanylalcohol, and naphthol. The mass spectra of bituminous coal featured characteristic peaks, including m/z 192 (methylphenanthrene), 206, 220 (alkylated phenanthrenes), and 234 (retene). Anthracite coal showed a potential tracer at m/z 223, shifting from OC1 in smoldering to OC2 in flaming. Clean coal under flaming condition exhibited elevated levels of aromatic compounds, indicating potential toxicity, with peaks at m/z 178 (phenanthrene), 228 (chrysene/benz[a]anthracene), 234 (retene), 242 (methylchrysene), and 252 (benzo[a]pyrene, benzo[k]fluoranthene). Results also showed that the broader mass spectra range in the OC3 and OC4 steps across all coal types suggests that high-temperature pyrolysis promotes diversity. These findings contribute to refined source apportionment of carbon emissions from residential coal combustion and provide the scientific basis for the formulation of air pollution prevention strategies, crucial for coal-dependent regions.

Synthesis and pyrolysis of polyacrylate-supported flavor precursors

Herein we present a novel ‘polymerization strategy’ aimed at synthesizing flavor precursors, with a focus on enhancing their thermal stability and release properties. Three volatile flavors, menthol, methyl cyclopentenolone, and ethyl maltol, are reacted with acryloyl chloride to produce corresponding vinyl monomers. These monomers undergo radical polymerization to form homopolymers (P1−P3). To improve solubility in alcohol solvents, a hydrophilic oligoethylene glycol monomer is introduced, copolymerized with the flavor containing monomers, resulting in copolymers (P4−P6). An important advantage of these polymers lies in their significantly enhanced thermal stability, exhibiting an increase of approximately 100 to 200 °°C compared to small molecular flavors. Furthermore, our methodology enables efficient release of the target flavors upon heating, as evidenced by online analyses of volatiles from pyrolysis using fixed-bed reactor combined with single photoionization mass spectrometry (FBR-SPIMS) and pyrolysis-gas chromatography-mass spectrometry (Py-GC–MS). This work represents a practical and innovative approach to improving the thermal stability of volatile flavors and elevating their release temperature, offering promising applications in high-temperature food processing and tobacco industries.

Stress-Alteration Enhancement of the Reactivity of Aluminum Nanoparticles in the Catalytic Decomposition of exo-Tetrahydrodicyclopentadiene (JP-10).

High-energy-density aluminum nanoparticles (AlNPs) upon thermal annealing followed by superquenching result in elevated stress levels in the metallic core and reduced surface energy at the core-shell interface. Isomer-selective vacuum ultraviolet-based photoionization mass spectrometry coupled to a high-temperature chemical microreactor reveals that these stress-altered AlNPs (SA-AlNPs) exhibit distinctive temperature-dependent reactivities toward catalytic decomposition of the hydrocarbon jet fuel exo-tetrahydrodicyclopentadiene (JP-10, C10H16) compared to untreated AlNPs (UN-AlNPs). SA-AlNPs show a delayed initiation of the decomposition for JP-10 by 200 K relative to the UN-AlNPs; however, the full decomposition is achieved at a 100 K lower temperature. Furthermore, there are fewer oxygenated products that are generated from the alumina surface-induced heterogeneous oxidation process and a larger fraction of closed- and open-shell hydrocarbons. Chemical insight bridging the reactivity order of SA-AlNPs at low and high temperatures, simultaneously, is obtained via a detailed examination of the product branching ratios obtained in this study.

A comparative pyrolysis study of tetraethoxysilane and tetraethoxymethane: Insight into congener substitution effects on pyrolysis chemistry of siloxane flame synthesis precursors

The pyrolysis of siloxane precursors, such as tetraethoxysilane (TEOS), is commonly employed in the flame synthesis and chemical vapor deposition of silica nanoparticles. In this work, the flow reactor pyrolysis of TEOS is studied using gas chromatography (GC) and synchrotron vacuum ultraviolet photoionization mass spectrometry (SVUV-PIMS), and the congener substitution effects from the central C atom to the central Si atom are investigated through comparison with its hydrocarbon counterpart tetraethoxymethane (TEOM). Pyrolysis models of TEOS and TEOM are constructed and validated against the measured results. Modeling analysis, including rate of production analysis and sensitivity analysis, provides insights into chemistry in fuel consumption and product formation. In contrast, the observations of silicon-containing products in SVUV-PIMS experiments provide evidence for crucial decomposition pathways of TEOS. It is observed that TEOS exhibits significantly higher stability than TEOM under pyrolysis conditions. The most abundant products in the pyrolysis of TEOS and TEOM are ethylene and ethanol, and TEOS produces more hydrocarbon products than TEOM. The lower pyrolysis reactivity of TEOS is attributed to the slower unimolecular decomposition reaction which dominates the decomposition of TEOS than TEOM. This can be explained by the hindrance of the extremely strong Si-O bond resulting from the significantly different electronegativity between Si and O. The higher initial decomposition temperature of TEOS enhances the contribution of other decomposition channels, such as C-C bond dissociation and H-abstraction reactions, in TEOS consumption. This leads to the abundant formation of hydrocarbon productions such as methane, ethane, and acetaldehyde. As the main pyrolysis product, the ethanol produced by TEOM pyrolysis is four times that of TEOS due to the congener substitution effects. The ethanol formation pathway in TEOS pyrolysis is different from that in TEOM pyrolysis, which is mainly formed via a newly proposed multi-step mechanism, resulting in a lower yield in TEOS pyrolysis.

Low temperature oxidation chemistry of n-butylbenzene in n-decane/n-butylbenzene mixture: Product characterization and kinetic modeling study

n-Alkanes and aromatics are two essential components in transportation fuels and have distinct oxidation reactivities. Due to products with different chemical functionalities generated in oxidation of n-alkanes and aromatics, the interaction kinetics may significantly affect the overall reactivity as well as product distributions. This work investigated the oxidation chemistry of the mixture of n-decane and n-butylbenzene, both of which are C10 hydrocarbons commonly used as jet fuel surrogate components. The experiments were conducted in a jet stirred reactor at pressure of 1 atm, the temperature range of 450–850 K, and the equivalence ratios of 0.5, 1.0 and 2.0. Key low temperature oxidation intermediates and radicals, including C10-cyclic ethers, C10-ketohydroperoxides, C10-ketodihydroperoxide, C10-diketohydroperoxide, benzyl hydroperoxide, methyl peroxy radical and methyl hydroperoxide, were detected by using synchrotron vacuum ultraviolet photoionization mass spectrometry. A detailed kinetic model was developed and validated against the speciation data in this work. Results reveal that the reactions of n-decane greatly enhance the low temperature oxidation reactivity of n-butylbenzene by efficiently producing reactive radicals, such as OH radicals. Besides, the reactions of n-butylbenzene play an inhibiting role in low temperature oxidation reactivity of n-decane. The measured intermediates, such as C10-cyclic ethers, C10-ketohydroperoxides and C10-ketodihydroperoxide, provide experimental evidence to validate the first, second and third O2-addition reactions, respectively. Due to the addition of n-decane, the evolution profiles of aromatic intermediates as a function of temperature are quite different from the cases of pure n-butylbenzene oxidation. For example, the formation of benzene, phenol and benzaldehyde at low temperatures is significantly enhanced, whose mole fractions present negative temperature coefficient behaviours. Finally, the reaction pathways of the binary fuel to produce C5C1 alkenes, alkynes, aldehydes, alcohols, acids and peroxides were analysed.

Ni-Based Catalysts for CO2 Methanation: Exploring the Support Role in Structure-Activity Relationships.

The catalytic hydrogenation of CO2 to methane is one of the highly researched areas for the production of chemical fuels. The activity of catalyst is largely affected by support type and metal-support interaction deriving from the special method during catalyst preparation. Hence, we employed a simple solvothermal technique to synthesize Ni-based catalysts with different supports and studied the support role (CeO2, Al2O3, ZrO2, and La2O3) on structure-activity relationships in CO2 methanation. It is found that catalyst morphology can be altered by only changing the support precursors during synthesis, and therefore their catalytic behaviours were significantly affected. The Ni/Al2O3 with a core-shell morphology prepared herein exhibited a higher activity than the catalyst prepared with a common wet impregnation method. To have a comprehensive understanding for structure-activity relationships, advanced characterization (e. g., synchrotron radiation-based XAS and photoionization mass spectrometry) and in-situ diffuse reflectance infrared Fourier transform spectroscopy experiments were conducted. This research opens an avenue to further delve into the role of support on morphologies that can greatly enhance catalytic activity during CO2 methanation.

Efficient Oxidative Decomposition of Jet-Fuel exo-Tetrahydrodicyclopentadiene (JP-10) by Aluminum Nanoparticles in a Catalytic Microreactor: An Online Vacuum Ultraviolet Photoionization Study.

The oxidation of gas-phase exo-tetrahydrodicyclopentadiene (JP-10, C10H16) over aluminum nanoparticles (AlNP) has been explored between a temperature range of 300 and 1250 K with a novel chemical microreactor. The results are compared with those obtained from chemical microreactor studies of helium-seeded JP-10 and of helium-oxygen-seeded JP-10 without AlNP to gauge the effects of molecular oxygen and AlNP, respectively. Vacuum ultraviolet (VUV) photoionization mass spectrometry reveals that oxidative decomposition of JP-10 in the presence of AlNP is lowered by 350 and 200 K with and without AlNP, respectively, in comparison with pyrolysis of the fuel. Overall, 63 nascent gas-phase products are identified through photoionization efficiency (PIE) curves; these can be categorized as oxygenated molecules and their radicals as well as closed-shell hydrocarbons along with hydrocarbon radicals. Quantitative branching ratios of the products reveal diminishing yields of oxidized species and enhanced branching ratios of hydrocarbon species with the increase in temperature. While in the low-temperature regime (300-1000 K), AlNP solely acts as an efficient heat transfer medium, in the higher-temperature regime (1000-1250 K), chemical reactivity is triggered, facilitating the primary decomposition of the parent JP-10 molecule. This enhanced reactivity of AlNP could plausibly be linked to the exposed reactive surface of the aluminum (Al) core generated upon the rupture of the alumina shell material above the melting point of the metal (Al).

Exploration on the combustion chemistry of p-xylene: A comprehensive study over wide conditions and comparison among C8H10 isomers

Pyrolysis and oxidation of p-xylene over wide conditions were studied in this work in order to provide a comprehensive insight into the combustion chemistry of p-xylene. Concerning this goal, the pyrolysis of p-xylene was investigated in a flow reactor at pressures from 0.04 to 1 atm over the temperature range of 1000–1600 K. Key radicals, isomers and PAH products including three xylyl isomers, benzyl, xylylene isomers, styrene, benzene, fulvene, indene, naphthalene and phenanthrene, were identified and quantified using synchrotron vacuum ultraviolet photoionization mass spectrometry. The oxidation of p-xylene was studied in a jet-stirred reactor at 10 atm, 800–1300 K and equivalence ratios of 0.5–2.0 with a residence time of 0.5 s. Oxidation products were quantified by using gas chromatography combined with mass spectrometry and Fourier transform infrared spectrometry. A kinetic model for p-xylene combustion over wide conditions was developed based on our previously proposed p-xylene oxidation model and validated against the new experimental measurements in this work and literature reported experimental data, including flow reactor oxidation, laminar premixed flame, ignition delay time and laminar burning velocity. In the flow reactor pyrolysis, p-xylene mainly undergoes unimolecular decomposition to yield p-xylyl, which mainly suffers the H-loss reaction to form p-xylylene and isomerization reaction to form o-xylyl. The resonantly stabilized fulvenallenyl and benzyl radicals play an important role in the formation of bicyclic and tricyclic PAHs including indene, naphthalene, and phenanthrene. In the JSR oxidation, p-xylene is predominantly consumed via H-abstraction by oxygenated radicals such as OH, O, and HO2 forming p-xylyl, which can be oxidized by HO2 and eventually converted to p-methylbenzaldehyde. As the most abundantly produced oxygenated aromatics, further consumption of p-methylbenzaldehyde results in the formation of other observed oxygenated aromatics such as cresol, benzofuran, and benzaldehyde. The combustion chemistry of three C8H10 isomers, i.e., p-xylene, o-xylene, and ethylbenzene, were also compared in terms of pyrolysis and oxidation fuel reactivity, and PAHs formation and growth, showing remarkable fuel isomeric effects.

Absolute Photoionization Cross Section and Dissociative Ionization Pathways of Alpha-Pinene.

The absolute photoionization cross section of the monoterpenoid, alpha-pinene (AP), is presented together with the relative photoionization cross sections of its dissociative fragments for the first time. Experiments are performed via multiplexed vacuum ultraviolet (VUV) synchrotron photoionization (PI) mass spectrometry in the 8.0-11.0 eV energy range. Experimental work is conducted at the Advanced Light Source of the Lawrence Berkeley National Laboratory. Dissociative fragments were identified at m/z 121, 94, 93, 92, and 80. The photoionization cross section for the parent mass at 11.0 eV was determined to be 17±4 Mb with a total ionization cross section of 92±23 Mb at the same photon energy. Experimental appearance energies of dissociative ionization fragments and potential dissociative ionization pathways calculated at the G4 level of theory are presented as well.

Direct Experimental Observation of the Tetrabromine Cluster Br4 by Synchrotron Photoionization Mass Spectrometry.

We present a first spectroscopic characterization of the homoatomic polyhalogen tetrabromine, Br4, in the gas phase. Photolysis of CHBr3 at 248 nm is used to generate atomic bromine radicals in a flow tube reactor. Resulting combination products are detected by photoionization mass spectrometry at the Advanced Light Source of the Lawrence Berkeley National Laboratory. Interpretation of the experimental mass spectra is informed by calculated adiabatic ionization energies carried out at the CCSD(T)/aug-cc-pVTZ//M06-2X/aug-cc-pVTZ and CCSD(T)/aug-cc-pVTZ//cam-B3LYP/6-311++g** levels of theory. Tunable VUV synchrotron radiation enables the collection of the mass-selected photoionization spectra by which Br4 is assigned using Franck-Condon simulations of a Br2 dimer with a stretched tetrahedral geometry.

Elucidating the low temperature chemistry of o-xylene enhanced by the reaction pool of dimethyl ether

The branched aromatic hydrocarbon with short side chains, such as o-xylene, has weak low temperature oxidation reactivity, while it could proceed low temperature chain recycling reactions by blending a fuel component with higher oxidation reactivity. However, the study of low temperature oxidation kinetics of o-xylene is very scarce. Therefore, this work investigated the low temperature oxidation process of o-xylene in an atmospheric jet stirred reactor by adding a biofuel with higher low temperature oxidation reactivity, i.e. dimethyl ether (DME). A series of characteristic low temperature intermediates, such as phenyl hydroperoxides and ketohydroperoxide from the oxidation of o-xylene, were detected by using the synchrotron vacuum ultraviolet photoionization mass spectrometry (SVUV-PIMS). The chemical structures of representative low temperature intermediates were determined by comparing the ionization thresholds from measured photoionization efficiency curves with calculated ionization energies. A kinetic model for o-xylene and DME mixture was developed and verified by literature and present experimental data. Rate of production (ROP) and sensitivity analyses were performed, which indicate that the low temperature oxidation chemistry of o-xylene, such as the negative temperature coefficient behavior, is enhanced by the reaction pool of DME. According to the classical low temperature oxidation mechanism of n-alkanes, the low temperature reactions of o-xylene were proposed. In particular, phenyl hydroperoxides and ketohydroperoxides were revealed to be key indicators for the occurrence of first and second O2 addition reactions during the oxidation of o-xylene, respectively. In addition, the sensitivity analysis uncovers the interaction kinetics between the reaction pools of o-xylene and DME, as well as their effects on fuel consumption and products formation. In summary, present evidence elucidates the low temperature chemistry of a representative branched aromatic, which could contribute to the development of future engines and control of combustion pollutants.

Determination of the two-compartment model parameters of exhaled HCN by fast negative photoionization mass spectrometry

Breath exhaled hydrogen cyanide (HCN) has been identified to be associated with several respiratory diseases. Accurately distinguishing the concentration and release rate of different HCN sources is of great value in clinical research. However, there are still significant challenges due to the high adsorption and low concentration characteristics of exhaled HCN. In this study, a two-compartment kinetic model method based on negative photoionization mass spectrometry was developed to simultaneously determine the kinetic parameters including concentrations and release rates in the airways and alveoli. The influences of the sampling line diameter, length, and temperature on the response time of the sampling system were studied and optimized, achieving a response time of 0.2 s. The negative influence of oral cavity-released HCN was reduced by employing a strategy based on anatomical lung volume calculation. The calibration for HCN in the dynamic range of 0.5–100 ppbv and limit of detection (LOD) at 0.3 ppbv were achieved. Subsequently, the experiments of smoking, short-term passive smoking, and intake of bitter almonds were performed to examine the influences of endogenous and exogenous factors on the dynamic parameters of the model method. The results indicate that compared with steady-state concentration measurements, the kinetic parameters obtained using this model method can accurately and significantly reflect the changes in different HCN sources, highlighting its potential for HCN-related disease research.

Low-temperature oxidation of n-butanol in a jet-stirred reactor: Detailed species measurements and modeling studies

n-Butanol is a new generation of liquid biofuel. A detailed understanding of the low-temperature combustion chemistry of n-butanol is instructive for its practical application in advanced low-temperature engines. The high-temperature combustion chemistry of n-butanol has been extensively studied, but its low-temperature combustion chemistry remains underexplored, especially the detailed species distribution. In this work, ozone addition was used to enhance the low-temperature oxidation reaction activity to achieve the oxidation of n-butanol in a jet-stirred reactor (JSR) at atmospheric pressure and in the temperature range of 400–800 K. Synchrotron vacuum ultraviolet photoionization mass spectrometry (SVUV-PIMS) was used for detailed measurements of species distribution. The identification of some intermediate species contributed to elucidating and verifying the low-temperature oxidation reaction pathways of n-butanol, such as butanal, C4 hydroxyalkyl hydroperoxides, C4 hydroxyl cyclic ether, and C4 keto-hydroperoxide. Furthermore, the formation of several elusive intermediates was also identified (e.g., C2H4O2, C3H6O2, C4H6On (n = 1∼3), and C4H8O2), highlighting the necessity of further kinetic studies on the low-temperature oxidation of n-butanol. Based on detailed experimental measurements, the n-butanol model was further developed to improve the model predictions by updating the rate constants for the H-atom abstraction reactions of n-butanol by the ȮH radical, adding the detailed butanal sub-mechanism, etc. Especially, the premature formation of CO2 in the present experiment was satisfactorily explained and predicted by the addition of a generally accepted reaction class (i.e., RȮ2 + RȮ2 = RȮ + RȮ + O2 of butanal). Overall, this updated model satisfactorily predicts both the ignition delay time reported in the literature and the species distribution obtained in this work.

New insights into the NH3/N2O/Ar system: Key steps in N2O evolution

Understanding the formation and evolution of N2O in NH3-fueled combustion has implications for pollutant control and for developing a more accurate kinetic model of NH3. A previous study on an NH3/N2O/N2 mixture showed a significant discrepancy between experimental measurements and modeling predictions. The importance of the highlighted reaction NH2 + N2O = N2H2 + NO, whose rate constant remains substantially uncertain, is still an open question. In the present work, two NH3/N2O/Ar mixtures, referred to as fuel-lean and fuel-rich cases, respectively, were experimentally investigated using JSRs over 800–1225 K under atmospheric pressure. Various diagnostic techniques, including synchrotron vacuum ultraviolet photoionization mass spectrometry (SVUV-PIMS), gas chromatography (GC), and Fourier transform infrared spectroscopy (FTIR), were employed to detect the detailed product species. The key reaction NH2 + N2O was calculated for the first time, and the kinetic model was updated based on the theoretical calculation and interpretation of the experimental observations. The results showed that the rate constants of NxHy + N2O reactions, including NH2 + N2O and NH + N2O, were significantly overestimated in previous models. This results in the non-dominant role for this reaction class, even in the scenario where N2O appears in large amounts. On the contrary, the thermal dissociation of N2O (N2O (+M) = N2 + O (+M)) controlled the reactivity of the title system due to its chain-initiated role that triggered the consumption of NH3. The fate of amine radical (NH2) was critical to determine the nitrogen chemistry in this system. Instead of being oxidated, NH2 was converted mainly via amine-amine steps, which implied that the title system had particular implications for understanding the NH3 pyrolysis or oxidation under fuel-rich conditions.

Online quantification of nicotine in e-cigarette aerosols by vacuum ultraviolet photoionization mass spectrometry.

The growing popularity of e-cigarettes and the associated risks of nicotine addiction present a new challenge to global public health security. Measuring the nicotine levels in e-cigarette aerosols is essential to assess the safety of e-cigarettes. In this study, a rapid in situ method was developed for online quantification of nicotine in e-cigarette aerosols by using a homemade vacuum ultraviolet photoionization aerosol mass spectrometer (VUV-AMS). E-cigarette liquids with different nicotine concentrations were prepared to generate aerosols containing different levels of nicotine, which were employed as the calibration sources for nicotine quantification by VUV-AMS. The results showed that the mass concentration of nicotine in e-cigarette aerosols has a good linear relationship with its signal intensity in the mass spectrum, and the limits of detection and quantitation of nicotine by VUV-AMS were found to be 2.0 and 6.2 μg per puff respectively. Then the online method was utilized to measure five commercial e-cigarettes, and their nicotine yields were determined to be between 31 and 188 μg per puff with the nicotine fluxes from 7.7 to 70 μg s-1, agreeing with the results of the gas chromatography with a flame ionization detector (GC-FID). This study demonstrated the feasibility and advantages of VUV-AMS for quick quantification of nicotine in e-cigarette aerosols within seconds.

Ozone-assisted low temperature oxidation of indene: An experimental and computational study

Elucidating the oxidation chemistry of polycyclic aromatic hydrocarbons (PAHs) aids in understanding the degradation reaction processes of PAHs, as well as their competitive roles in PAH growth. In this work, ozone-assisted oxidation of indene, the smallest prototype PAH molecule, was investigated in an atmospheric jet stirred reactor at 400–550 K. Ab initio quantum chemistry calculations were conducted to characterize the oxidation kinetics of indene and interpret the experimental observations. Fingerprint oxidation products including 2-(2-oxoethyl) benzoic acid, 2-(formylmethyl) benzaldehyde, 1,2-indanedione and 1-indanone were identified by synchrotron vacuum ultraviolet photoionization mass spectrometry. The initial C9H8O3 adduct resulting from O3-addition to indene exhibits high instability and is primarily detected as 2-(2-oxoethyl)benzoic acid following ozonolysis reactions. Minor amounts of vinylhydroperoxide were also observed as isomeric products of the C9H8O3 adduct. Theoretical calculations indicate that indene ozonolysis is highly structure-dependent, where the conformation of the C9H8O3 adduct determines the configuration of the resulting Criegee intermediates (CI). The distinctive reaction pathways introduced by the bifunctionalized characteristics of indene-derived large CIs are emphasized in this study. syn-Configuration CI features more conversion pathways compared to anti-CI due to the interaction between CI functionality and the neighboring aldehyde group, among which the bicyclic ring-closure reaction yielding secondary ozonide is most favored. The dioxirane intermediates generated from anti-CIs can undergo the Crossed Acid-forming channel to yield the target acid products, which provides an alternative way for dioxirane conversion. Further theoretical analyses demonstrate that ozonolysis is not the exclusive mechanism for indene oxidation under O3-assisted conditions. Instead, it is accompanied by low-temperature reactions initiated by OH/O2, leading to key products such as 2-(formylmethyl) benzaldehyde and 1-indanone. The present work aims to unravel the elusive chemistry involved in the O3-initiated oxidation of indene, providing new insights into the distinctive kinetics introduced by large bifunctionalized CIs in the ozonolysis of structurally similar PAHs.

Coupling experimental and modeling approaches for understanding diethoxymethane low-temperature oxidation at high pressure

Diethoxymethane (DEM) has attracted significant attention as a potential renewable alternative fuel. The lack of detailed product species distributions for DEM oxdation led to insufficient exploration of its low-temperature oxidation chemistry. In this study, the low-temperature oxidation reactions of DEM were conducted using a jet-stirred reactor (JSR) coupled with synchrotron vacuum ultraviolet photoionization mass spectrometry (SVUV-PIMS) under conditions of 10 atm, an equivalence ratio of 0.5, and temperatures ranging from 470 to 850 K. Identification and quantification of various oxygenated species were performed. Additionally, complementing our previous kinetic theoretical studies for low-temperature oxidation of DEM radicals, previously calculated rate constants were incorporated into an earlier DEM combustion model, accompanied by additional adjustments to the rate constants of hydrogen abstraction reactions by C˙2H3 radicals. The modified model exhibits good agreement between the predicted and experimentally obtained product mole fraction distributions. Remarkably, a relatively weak negative temperature coefficient (NTC) was observed under the studied conditions, highlighting differences in the self-ignition behavior of DEM compared to other highly reactive fuels. Analyzing the rates of production (ROP) in the modified model indicates that the use of oxygenated fuels might elevate the production of small-molecule oxygenated pollutants while reducing the formation of carbon soot precursors and consequently curbing soot generation. Moreover, keto-hydroperoxides (KHPs) were detected during the experimental process. This study lays a foundation for further detailed exploration of the DEM oxidation mechanism, aiding in untangling its intricate reaction processes.

Exploring the oxidation chemistry of diethyl carbonate in lithium-ion battery thermal runaway using SVUV-PIMS

With the extensive applications of lithium-ion batteries and widespread concerns about their security, it is necessary to deeply understand the reaction mechanism of thermal runaway process of Li-ion batteries. Oxygen released from cathode and anode materials could react with electrolyte solvents with increased temperatures. However, the chemical mechanism remains elusive due to the complexity of the battery system. In this work, we developed a method to study the oxidation chemistry of electrolyte solvents and oxygen in lithium-ion battery thermal runaway process. The liquid phase oxidation of diethyl carbonate (DEC) with oxygen was studied in a closed autoclave with diverse oxygen concentrations, temperatures and reaction times. The samples were measured by synchrotron vacuum ultraviolet radiation photoionization mass spectrometry (SVUV-PIMS) to quantitatively analyze the oxidation products. It was found that the onset reaction temperature is less than 120 °C, which indicates that it maybe occurs in the early stage of Li-ion battery thermal runaway. Besides, the feasible reaction scheme is discussed to rationalize the formation of the primary products.

Time-resolved quantification of key species and mechanistic insights in low-temperature tetrahydrofuran oxidation.

We investigate the kinetics and report the time-resolved concentrations of key chemical species in the oxidation of tetrahydrofuran (THF) at 7500 torr and 450-675 K. Experiments are carried out using high-pressure multiplexed photoionization mass spectrometry (MPIMS) combined with tunable vacuum ultraviolet radiation from the Berkely Lab Advanced Light Source. Intermediates and products are quantified using reference photoionization (PI) cross sections, when available, and constrained by a global carbon balance tracking approach at all experimental temperatures simultaneously for the species without reference cross sections. From carbon balancing, we determine time-resolved concentrations for the ROO˙ and ˙OOQOOH radical intermediates, butanedial, and the combined concentration of ketohydroperoxide (KHP) and unsaturated hydroperoxide (UHP) products stemming from the ˙QOOH + O2 reaction. Furthermore, we quantify a product that we tentatively assign as fumaraldehyde, which arises from UHP decomposition via H2O or ˙OH + H loss. The experimentally derived species concentrations are compared with model predictions using the most recent literature THF oxidation mechanism of Fenard et al., (Combust. Flame, 2018, 191, 252-269). Our results indicate that the literature mechanism significantly overestimates THF consumption and the UHP + KHP concentration at our conditions. The model predictions are sensitive to the rate coefficient for the ROO˙ isomerization to ˙QOOH, which is the gateway for radical chain propagating and branching pathways. Comparisons with our recent results for cyclopentane (Demireva et al., Combust. Flame, 2023, 257, 112506) provide insights into the effect of the ether group on reactivity and highlight the need to determine accurate rate coefficients of ROO˙ isomerization and subsequent reactions.

An experimental and modeling study on homogeneous oxidative coupling of methane utilizing N2O as oxidant

Experimental and kinetic modeling studies were performed to investigate the homogeneous oxidative coupling of methane utilizing nitrous oxide as the oxidant (N2O-OCM). The experiments were performed in a jet stirred reactor at atmospheric pressure and temperatures of 773–1173 K. Synchrotron vacuum ultraviolet photoionization mass spectrometry was used to achieve comprehensive and isomer-resolved identification of major products and nitrogenous, carbonyl and hydrocarbon intermediates. To interpret the experiments, a detailed kinetic model was developed by extending the widely used hydrocarbon growth mechanisms. Rate of production and sensitivity analyses were performed to provide a deep insight into the complex reaction network. The results demonstrate that N2O dissociation is the rate-controlling step, and the mild oxidation of N2O effectively reduces the production of CO2 as byproduct and meanwhile improves the selectivity of C2 species. In the presence of N2O, CH3 can actively participates in H-abstraction reactions of C2H6 and C2H4, besides the self-coupling reactions. Due to chain-propagation competition reactions (N2O+H=N2+OH and N2O+H=NH+NO), NH3 and NO exhibit low concentrations. The detailed formation pathways for NH3 and NO were elaborated, and the evolution routes of carbonyl intermediates in the presence of N2O were analyzed. Benzene formation is found mainly through C3 self-recombination and C5 ring reforming reactions. Finally, comparative analysis with O2-OCM reveals that the presence of oxygen promotes the conversion of CH3 to CH2O and deep oxidation of C2H3, explaining the lower C2 yield of O2-OCM. The inherent limitation of the C2 yield of N2O-OCM primarily arises from the reaction of C2H4 and O, as well as the subsequent reaction CH2(S)+N2O=CH2O+N2. The experiment observations confirmed the existence of C2 carbonyl intermediates such as ketene and acetaldehyde. The study highlights the notable role of O2 molecular and O atoms in the homogeneous OCM and offers kinetic support for the OCM reaction process with catalysts.