Photoinduced Energy Transfer Processes Research Articles

Application of the LADA Strategy for the Synthesis of Styrylalanine through Photocatalytic Addition to Alkenylboronic Acids.

Unnatural amino acids (UAAs) are highly valuable building blocks in organic synthesis, pharmaceuticals, and material sciences. Previously, we developed the LADA strategy for the synthesis of UAAs. Herein, we further expanded the scope of this strategy to alkenylboronic acids. Interestingly, both photoinduced single-electron transfer (SET) and energy transfer (EnT) processes were involved in this reaction, and the E/Z ratio of the products could be changed upon reaction condition.

Synthesis of β-Silyl Amines via Merging Photoinduced Energy and Hydrogen Atom Transfer in Flow.

The development of efficient methods for synthesizing β-silyl amines has long been a significant goal in organic synthesis. Previous methods mainly relied on the use of prefunctionalized substrates or special reagents. Herein, we present a visible-light-promoted synthesis approach for β-silyl amines, utilizing a combination of photoinduced energy and hydrogen atom transfer processes. Using flow chemistry technology, a variety of valuable skeletons, including β-silyl amines and α-amino esters, can be produced from readily available feedstocks such as hydrosilanes and simple alkanes. Moreover, the strategy's full-process fluidized production capability highlights its potential for industrial-scale manufacturing. Mechanistic studies revealed that oxime esters can act as radical precursors as well as hydrogen atom transfer reagents.

Ultrafast Excited-State Energy Transfer in Phenylene Ethynylene Dendrimer: Quantum Dynamics with the Tensor Network Method.

Photoinduced excited-state energy transfer (EET) processes play an important role in solar energy conversions. Owing to their excellent photoharvesting and exciton-transport properties, phenylene ethynylene (PE) dendrimers display great potential for improving the efficiency of solar cells. In this work, we investigated the intramolecular EET dynamics in a dendrimer composed of two linear PE units (2-ring and 3-ring) using a fully quantum description based on the tensor network method. We first constructed a diabatic model Hamiltonian based on the electronic structure calculations. Using this diabatic vibronic coupling model, we tried to obtain the main features of the EET dynamics in terms of the several diabatic models with different numbers of vibrational modes (from 4 modes to 129 modes) and to explore the corresponding vibronic coupling interactions. The results show that the EET in this PE dendrimer is ultrafast. Four modes of A' symmetry play dominant roles in the dynamics; the remaining 86 modes of A' symmetry can dampen the electronic coherence; and the modes of A″ symmetry do not exhibit significant influence on the EET process. Overall, the first-order intrastate vibronic coupling terms show the dominant role in the EET dynamics, while the second-order intrastate vibronic coupling terms cause damping of the electronic coherence and slow down the overall EET process. This work provides a microscopic understanding of the EET dynamics in PE dendrimers.

Porphyrin-BODIPY Dyad: Enhancing Photodynamic Inactivation via Antenna Effect.

A porphyrin-BODIPY dyad (P-BDP) was obtained through covalent bonding, featuring a two-segment design comprising a light-harvesting antenna system connected to an energy acceptor unit. The absorption spectrum of P-BDP resulted from an overlap of the individual spectra of its constituent parts, with the fluorescence emission of the BODIPY unit experiencing significant quenching (96 %) due to the presence of the porphyrin unit. Spectroscopic, computational, and redox investigations revealed a competition between photoinduced energy and electron transfer processes. The dyad demonstrated the capability to sensitize both singlet molecular oxygen and superoxide radical anions. Additionally, P-BDP effectively induced the photooxidation of L-tryptophan. In suspensions of Staphylococcus aureus cells, the dyad led to a reduction of over 3.5 log (99.99 %) in cell survival following 30 min of irradiation with green light. Photodynamic inactivation caused by P-BDP was also extended to the individual bacterium level, focusing on bacterial cells adhered to a surface. This dyad successfully achieved the total elimination of the bacteria upon 20 min of irradiation. Therefore, P-BDP presents an interesting photosensitizing structure that takes advantage of the light-harvesting antenna properties of the BODIPY unit combined with porphyrin, offering potential to enhance photoinactivation of bacteria.

Integrating Photoactive Ligands into Crystalline Ultrathin 2D Metal-Organic Framework Nanosheets for Efficient Photoinduced Energy Transfer.

3D metal-organic frameworks (MOFs) have gained attention as heterogeneous photocatalysts due to their porosity and unique host-guest interactions. Despite their potential, MOFs face challenges, such as inefficient mass transport and limited light penetration in photoinduced energy transfer processes. Recent advancements in organic photocatalysis have uncovered a variety of photoactive cores, while their heterogenization remains an underexplored area with great potential to build MOFs. This gap is bridged by incorporating photoactive cores into 2D MOF nanosheets, a process that merges the realms of small-molecule photochemistry and MOF chemistry. This approach results in recyclable heterogeneous photocatalysts that exhibit an improved mass transfer efficiency. This research demonstrates a bottom-up synthetic method for embedding photoactive cores into 2D MOF nanosheets, successfully producing variants such as PCN-641-NS, PCN-643-NS, and PCN-644-NS. The synthetic conditions were systematically studied to optimize the crystallinity and morphology of these 2D MOF nanosheets. Enhanced host-guest interactions in these 2D structures were confirmed through various techniques, particularly solid-state NMR studies. Additionally, the efficiency of photoinduced energy transfer in these nanosheets was evidenced through photoborylation reactions and the generation of reactive oxygen species (ROS).

Switchover from singlet oxygen to superoxide radical through a photoinduced two-step sequential energy transfer process.

The competitive nature of type II photosensitizers in the transfer of excitation energy for the generation of singlet oxygen (1O2) presents significant challenges in the design of type I photosensitizers to produce the superoxide anion radical (O2˙-). In this study, we present an efficient method for the direct transformation of type II photosensitizers into type I photosensitizers through the implementation of an artificial light-harvesting system (ALHSs) involving a two-step sequential energy transfer process. The designed supramolecular complex (DNPY-SBE-β-CD) not only has the ability to generate 1O2 as type II photosensitizers, but also demonstrates remarkable fluorescence properties in aqueous solution, which renders it an efficient energy donor for the development of type I photosensitizers ALHSs, thereby enabling the efficient generation of O2˙-. Meanwhile, to ascertain the capability and practicality of this method, two organic reactions were conducted, namely the photooxidation reaction of thioanisole and oxidative hydroxylation of arylboronic acids, both of which display a high level of efficiency and exhibit significant catalytic performance. This work provides an efficient method for turning type II photosensitizers into type I photosensitizers by a two-step sequential energy transfer procedure.

Nonadiabatic Dynamics Simulations for Photoinduced Processes in Molecules and Semiconductors: Methodologies and Applications.

Nonadiabatic dynamics (NAMD) simulations have become powerful tools for elucidating complicated photoinduced processes in various systems from molecules to semiconductor materials. In this review, we present an overview of our recent research on photophysics of molecular systems and periodic semiconductor materials with the aid of ab initio NAMD simulation methods implemented in the generalized trajectory surface-hopping (GTSH) package. Both theoretical backgrounds and applications of the developed NAMD methods are presented in detail. For molecular systems, the linear-response time-dependent density functional theory (LR-TDDFT) method is primarily used to model electronic structures in NAMD simulations owing to its balanced efficiency and accuracy. Moreover, the efficient algorithms for calculating nonadiabatic coupling terms (NACTs) and spin-orbit couplings (SOCs) have been coded into the package to increase the simulation efficiency. In combination with various analysis techniques, we can explore the mechanistic details of the photoinduced dynamics of a range of molecular systems, including charge separation and energy transfer processes in organic donor-acceptor structures, ultrafast intersystem crossing (ISC) processes in transition metal complexes (TMCs), and exciton dynamics in molecular aggregates. For semiconductor materials, we developed the NAMD methods for simulating the photoinduced carrier dynamics within the framework of the Kohn-Sham density functional theory (KS-DFT), in which SOC effects are explicitly accounted for using the two-component, noncollinear DFT method. Using this method, we have investigated the photoinduced carrier dynamics at the interface of a variety of van der Waals (vdW) heterojunctions, such as two-dimensional transition metal dichalcogenides (TMDs), carbon nanotubes (CNTs), and perovskites-related systems. Recently, we extended the LR-TDDFT-based NAMD method for semiconductor materials, allowing us to study the excitonic effects in the photoinduced energy transfer process. These results demonstrate that the NAMD simulations are powerful tools for exploring the photodynamics of molecular systems and semiconductor materials. In future studies, the NAMD simulation methods can be employed to elucidate experimental phenomena and reveal microscopic details as well as rationally design novel photofunctional materials with desired properties.

Photoinduced Processes in Molecular and Supramolecular Arrays Based on Porphyrins and Acridinium Units

Multichromophoric arrays based on porphyrins are of high interest for their mimicry of naturally occurring photoinduced energy and electron transfer processes leading to energy collection and conversion. [1] Moreover, the rich photophysics and electrochemistry of porphyrins make them suitable components of molecular wires, switches or chemical sensors. [2] In this perspective, it is interesting to pursue the combination of porphyrins with units that can act as multiresponsive components by modifying their chemical and electronic structure upon chemical or redox stimuli. N-acridinium ions have been recently explored as a new class of switches that respond to various orthogonal stimulations (pH or electrochemical/photochemical inputs) that trigger their reversible conversion into the non-aromatic acridane form. [3] Few examples reporting the association of acridinium units and porphyrins indicate that these systems are characterized by fast photoinduced electron transfer reactions between the porphyrin donor and the acridinium acceptor. [4,5]We recently investigated the photophysical properties of molecular and supramolecular arrays based on porphyrins and acridinium units, where the type of porphyrin (free-base or metallated) and/or the form of the switchable component (acridinium or acridane) has been varied (Figure 1). We found that the association of porphyrins and acridinium ions always leads to ultrafast electron transfer processes, and that these reactions can be altered by changing the temperature or by converting the acridinium electron acceptor into an acridane energy donor. Moreover, the combination of two Zn-porphyrins with two acridinium/acridane units results in switchable molecular receptors able to coordinate suitable hosts. The photophysics of the arrays and of the complexes, analyzed by means of steady-state and time-resolved luminescence techniques and ultrafast transient absorption spectroscopy, will be herein presented and discussed.The work is supported by the H2020-MSCA-ITN-2017-765297 project “NOAH” and by the H2020-LC-SC3-2020-RES-RIA-101006839 project “CONDOR”.[1] M. Beyler, L. Flamigni, V. Heitz, J.-P. Sauvage, B. Ventura, Photochem. Photobiol. 2014, 90, 275-286.[2] Beletskaya I, Tyurin VS, Tsivadze AY, Guilard R, Stern C. Chem. Rev. 2009, 109, 1659-1713.[3] H.-P. J. de Rouville, J. Hu, V. Heitz, ChemPlusChem, 2021, 86, 110-129.[4] A. Edo-Osagie, D. Sánchez-Resa, D. Serillon, E. Bandini, C. Gourlaouen, H.-P. Jacquot de Rouville, B. Ventura, V. Heitz, C. R. Chim. 2021, 24, 1-9.[5] H. Kotani, K. Ohkubo, M. J. Crossley, S. Fukuzumi, J. Am. Chem. Soc., 2011, 133, 11092-11095.Figure 1. Structures of the studied arrays and schemes of the occurring photoinduced processes: a) bisacridinium-Zn(II) porphyrin conjugate, b) bisacridinium-diphenylporphyrin conjugate, c) bis(acridinium/acridane)-Zn(II) porphyrin receptors. Figure 1

(Invited) Photoinduced Electron Transfer in Dyads Involving Complexes of C60 and Nanohoops. Effect of π-Extension and Aromaticity of the Nanohoop

Conversion of the sunlight into chemical energy is considered to be one of the most important and fundamental chemical reactions in nature. A broad variety of artificial photosynthetic systems based on dyads, triads and up to pentads involving electron donor and acceptor moieties have been designed and synthesized in order to investigate artificial photoinduced energy and electron transfer processes. One type of dyads with potential applications in solar cells is the one combining C60 complexed with nanohoops.[1] In this work, we discuss a series of computational studies that involves the photoinduced charge separation in complexes of C60 and Li+@C60 with a series of different nanohoops, such as the [10]cycloparaphenylene ([10]CPP) ring,[2] π-extended CPPs such as the hexa-peri-benzocoronene (HBC) or the tribenzo[fj,ij,rst]pentaphene (TBP),[3] and [n]cyclodibenzopentalenes ([n]CDBPs) as antiaromatic curved nanorings.[4] The analysis of complexes of C60 with nanohoops having different degrees of π-conjugation and aromaticity allow us to discuss the effect in the charge transfer separation and recombination on the level of π-extension and aromaticity present in the nanohoops.

Rapid and Ultrasensitive Fluorescence Sensing Platform Based on Nanometer-Sized Metal–Organic Frameworks for Transgenic CaMV 35S Promoter Detection

Rapid and sensitive identification of genetically modified organisms (GMOs) is urgent for food safety and people health. Herein, a rapid and ultrasensitive fluorescence sensing platform is developed based on the single-strand DNA-labeled FAM dye (FAM-ssDNA) and nanometer-sized Fe-metal–organic framework (Fe-MOF), Fe-MIL-88. Fe-MIL-88 possesses a large specific surface area, remarkable preferential combining capacity with ssDNA versus dsDNA, and great quenching ability. FAM-ssDNA probes are elaborately designed as facile fluorescent probes to be fully complementary with the target of cauliflower mosaic virus 35S promoter (CaMV 35S), which can be absorbed to the surface of Fe-MIL-88 through π–π stacking and electrostatic interaction. The results indicate that the quenching ability of Fe-MIL-88 is attributed to the combination of photoinduced electron transfer (PET) and fluorescence resonance energy transfer (FRET) processes. Benefiting from the distinguishable ability of Fe-MIL-88, the fluorescent biosensor exhibits a satisfactory linear range from 5 pM to 50 nM and a low limit of detection (LOD) down to 0.184 pM. Also, the operation time was less than 1 h. Furthermore, the sensor also performs well in the anti-interference test and real sample test. Importantly, the sensing platform is equipped with easier operation without any complicated and difficult immobilization steps. Therefore, the sensor owns cheering potential for the detection of GMOs.

Multichromophore Integrated Panchromatic AzaBODIPYs: Synthesis, Characterization, and Exploring the Role of AzaBODIPY as an Energy and Electron Relay in Photoinduced Processes.

Panchromatic azaborondipyrromethenes directly connected with N,N-ditolylaniline (TPA) and naphthalene (Naph) at 1,7- and/or 3,5-positions of the azaBODIPY platform, 1, 2, and 3, were synthesized and the role of the individual chromophore constituents in the photo-induced energy and electron transfer processes has been investigated. Optical absorption studies have indicated that, integrating the complementary absorbers, naphthalene and TPA moieties, into the azaBODIPY core yielded broad-band capturing dyes with the absorption ranging from 250-1000 nm. Parallel electrochemical studies revealed that TPA moiety in 1 and 2 is easier to oxidize when compared to azaBODIPY moiety, which are in congruent with the computational studies indicating that TPA moiety would behave as an electron donor and azaBODIPY as an acceptor in PET processes. Steady-state fluorescence studies indicated that the photo-excitation of the TPA moiety in 2 resulted in the occurrence of PET from 1TPA* to azaBODIPY generating (TPA)2+.-(azaBODIPY)-⸱ while that of naphthalene in 3 resulted in PEnT from 1(naphthalene)* to azaBODIPY forming (Naph)2+.-(azaBODIPY)*. Interestingly, in 1, excitation of naphthalene moiety resulted in sequential PEnT from 1(naphthalene)* to azaBODIPY followed by the PET from TPA to 1(azaBODIPY)* generating a charge-separated state, (TPA)2+.-(azaBODIPY)-⸱-(Naph)2. Fluorescence lifetime studies have indicated that the electron and energy transfer process occurred in nanosecond time scales.

Pillar[5]arene-porphyrin conjugates: from molecular flowers to photoactive rotaxanes

Our groups are involved in a research program on the development of molecular and supramolecular systems combining pillar[5]arene building blocks with porphyrins. Functionalization of both rims of the pillar[5]arene scaffold with metalloporphyrins generated giant molecular machines mimicking the blooming of a flower as well as light-harvesting devices. On the other hand, we have also used the host-guest properties of pillar[5]arene derivatives to prepare photoactive mechanically interlocked molecules. In such compounds, complementary subunits are associated into a single molecular ensemble but without being connected through covalent bonds. Inter-component photo-induced energy transfer processes remain however extremely fast in these systems despite the exclusive link through mechanical bonds. All these results are described in the present review.

Bimolecular reactivity of 3d metal-centered excited states (Cr, Mn, Fe, Co)

Metal-centered (MC) excited states (ESs) of 3d transition metal complexes (TMCs) often possess rather low energies so that these represent the lowest energy ESs. Additionally, MC states are often strongly distorted, hence they efficiently decay non-radiatively to the ground state. As bimolecular photoinduced electron transfer (PET) and energy transfer (EnT) processes require contact to the substrate, the metal confinement of the ES wavefunction of MC states makes these processes challenging. Consequently, MC states are considered less useful as compared to long-lived charge transfer states of higher energy with wavefunctions extending onto the ligands. Despite these supposed drawbacks, some classes of TMCs can successfully engage in bimolecular PET and EnT processes with MC states being the photoactive states. We discuss these initial examples of MC ES reactivity covering chromium, manganese, iron, and cobalt complexes with the aim to gain a deeper understanding of these processes and to identify the decisive key parameters. Finally, we present catalytic photoredox and energy transfer processes using photosensitizers with suitable MC ESs.

A Curcumin-BODIPY Dyad and Its Silica Hybrid as NIR Bioimaging Probes.

In this paper we describe the synthesis of a novel bichromophoric system in which an efficient photoinduced intercomponent energy transfer process is active. The dyad consists of one subunit of curcumin and one of BODIPY and is able to emit in the far-red region, offering a large Stokes shift, capable of limiting light scattering processes for applications in microscopy. The system has been encapsulated in MCM-41 nanoparticles with dimensions between 50 and 80 nm. Both the molecular dyad and individual subunits were tested with different cell lines to study their effective applicability in bioimaging. MCM-41 nanoparticles showed no reduction in cell viability, indicating their biocompatibility and bio-inertness and making them capable of delivering organic molecules even in aqueous-based formulations, avoiding the toxicity of organic solvents. Encapsulation in the porous silica structure directed the location of the bichromophoric system within cytoplasm, while the dyad alone stains the nucleus of the hFOB cell line.

Modulating Resonance Energy Transfer with Supramolecular Control in a Layered Hybrid Perovskite and Chromium Photosensitizer Assembly.

Recently, the low-dimensional organic-inorganic halide perovskites (OIHP) have been exploited heavily for their favorable exciton dynamics, broad-band emission, remarkable stability, and tunable band-edge excited-state energy compared to their 3D counterparts for potential optoelectronic applications. Low-dimensional perovskites are generally good candidates for utilization as room-temperature photoluminescence (PL) materials. Further, doping divalent transition metals like Mn2+ into OIHP is expected to introduce a 4T1-6A1-based low-energy luminescence emission around 600 nm; an optical property that is favorable for biomedical optoelectronics. Doping Mn2+ in the perovskite lattice is also expected to induce the generation of cytotoxic singlet oxygen species (1O2), a ROS that is being exploited for various therapeutic applications. To integrate these optical and therapeutic properties of a 2D (PEA)2PbBr4 (Pb PeV; PEA = phenylethylammonium cation) perovskite alloyed with Mn2+ ions (Mn:PbPeV) and the option for a photoinduced energy transfer process involving a Cr(III)-based 1O2 generating photosensitizer (CrPS), we designed a unique purpose-built nanoassembly (Mn:PbPeV@PCD) using the encapsulation properties of a water-soluble polymer derived from β-cyclodextrin (PCD). Here the PCD is observed to modulate the classical internal energy transfer of Pb2+ exciton to alloyed Mn2+ orange emission, resulting in the emergence of a new blue emission. The addition of CrPS into the Mn:PbPeV@PCD to generate the CrPS@Mn:PbPeV@PCD assembly results in restoring perovskite luminescence followed by the external energy transfer to CrPS. We have elucidated the mechanism of these cascade energy transfer processes between multiple components using steady-state and time-resolved luminescence techniques. Efficient ROS generation and its potential to induce an oxidation reaction of a biomolecule are realized using guanine as the target molecule. Further photoinduced cleavage studies with biomolecules confirmed the efficacy of the nanoassembly in inducing the cleavage of guanine-rich DNA. The study opens up a new direction in the field of perovskite for biomedical applications.

Preparation and third order nonlinear optical properties of corrole functionalized GO nanohybrids

Three novel corroles, 5,15-bis(phenyl)-10-(3-methoxy-4-hydroxylphenyl)- corrole PC, 5,15-bis(naphthyl)-10-(3-methoxy-4-hydroxylphenyl)-corrole NAPC and 5,15-bis(pyrenyl)-10-(3-methoxy-4-hydroxylphenyl)-corrole PYPC, were designed and synthesized. Their graphene oxide (GO) nanohybrids, PC-GO, NAPC-GO and PYPC-GO, were prepared by a covalent functionalization method and characterized by various spectroscopic techniques. The third order nonlinear optical (NLO) behavior of the corroles and their corresponding nanohybrids was investigated using open aperture Z-scan technique at 532 nm with 4 ns laser pulses. The nanohybrids showed enhanced NLO properties in comparison to the corresponding corroles. In addition, the NLO properties of nanohybrids increase in the order of NAPC-GO < PC-GO < PYPC-GO, while the corrole molecules exhibit NLO performance in the same order of NAPC < PC < PYPC, implying the NLO response originating from the corrole moiety play a more important role in the NLO properties of the nanohybrids than that arising from the photo-induced electron or energy transfer process between GO and corrole molecules. Importantly, at same transmission intensity, all the corroles showed typical nonlinear reverse saturation absorption (RSA) behavior, while all the nanohybrids exhibited a flip over behavior from saturation absorption (SA) to RSA. The different NLO response between the corrole molecules and their nanohybrids implies their promising applications as NLO materials.

Zinc phthalocyanine carrying sulfenyl and sulfydryl functionalized sulfur vacancies MoS2 for enhancement of the third order nonlinear optical property

Zinc phthalocyanine carrying sulfenyl and 6-sulfydryl linkers was firstly used to functionalize with sulfur vacancies MoS2. The synthesized MoS2/ZnPc composite was further prepared to be PVA (polyvinyl alcohol) thin films by a drop coating method. The microscopic structures and photophysical properties of novel MoS2/ZnPc composite were characterized. A series of analysis results indicate that zinc phthalocyanine with sulfenyl and 6-sulfydryl linkers is loaded to sulfur vacancies of MoS2 by ligand conjugation. The third order nonlinear optical properties of MoS2/ZnPc composite were studied by an open aperture Z-scan technique at 532 nm with 4 ns laser pulses width. In comparison with individual MoS2 or ZnPc, whether MoS2/ZnPc solution or MoS2/ZnPc/PVA film sample possesses larger third order nonlinear absorption coefficients (β) and lower limiting thresholds (F50). It can be ascribed to a combination of different NLO absorption mechanisms for MoS2/ZnPc composite, including one-photon absorption, two photon absorptions and nonlinear scattering of MoS2, triplet excited state absorption of ZnPc, nonlinear scattering of MoS2/ZnPc and the photo-induced electron transfer or energy transfer (PET/ET) process between MoS2 and ZnPc moieties.

Rational Design and Facile Synthesis of Dual-State Emission Fluorophores: Expanding Functionality for the Sensitive Detection of Nitroaromatic Compounds.

Six novel benzimidazole-based D-π-A compounds 4 a-4 f were concisely synthesized by attaching different donor/acceptor units to the skeleton of 1,3-bis(1H-benzimidazol-2-yl)benzene on its 5-position through an ethynyl link. Due to the twisted conformation and effective conjugation structure, these dual-state emission (DSE) molecules show intense and multifarious photoluminescence, and their fluorescence quantum yields in solution and solid state can be up to 96.16 and 69.82 %, respectively. Especially, for excellent photostability, obvious solvatofluorochromic and extraordinary wide range of solvent compatibility, DSE molecule 4 a is a multifunctional fluorescent probe for the visual detection of nitroaromatic compounds (NACs) with the limit of detection as low as 10-7 M. The quenching mechanism has been proved as the results of photoinduced electron transfer and fluorescence resonance energy transfer processes. Importantly, probe 4 a can sensitively detect NACs not only in real water samples, but also on 4 a-coated strips and 4 a@PBAT thin films.

A Brief History of Photoactive Interlocked Systems Assembled by Transition Metal Template Synthesis

More than three decades of research efforts have yielded powerful methodologies based on transition metal template-directed syntheses for the assembly of a huge number of interlocked systems, molecular knots, machines and synthesizers. Such template techniques have been applied in the preparation of mechanically linked electron donor–acceptor artificial photosynthetic models. Consequently, synthetic challenging photoactive rotaxanes and catenanes have been reported, in which the chromophores are not covalently linked but are still associated with undergoing sequential energy (EnT) and electron transfer (ET) processes upon photoexcitation. Many interlocked photosynthetic models produce highly energetic, but still long-living charge separated states (CSS). The present work describes in a historical perspective some key advances in the field of photoactive interlocked systems assembled by transition metal template techniques, which illustrate the usefulness of rotaxanes and catenanes as molecular scaffolds to organize electron donor–acceptor groups. The effects of molecular dynamics, molecular topology, as well as the role of the transition metal ion used as template species, on the thermodynamic and kinetic parameters of the photoinduced energy and electron transfer processes in the interlocked systems are also discussed.

Synthesis of Copper Metal Organic Framework Based on Schiff Base Tricarboxylate Ligand for Highly Selective and Sensitive Detection of 2,4,6-Trinitrophenol in Aqueous Medium.

By using Schiff base tricarboxylate ligand 5-(4-carboxybenzylideneamino)isophthalic acid (H3CIP), a new imine functionalized copper metal organic framework (MOF) has been synthesized solvothermally. It was fully characterized by Fourier Transform Infrared (FTIR) Spectroscopy, Powder X-Ray Diffraction (PXRD), Scanning Electron Microscopy (SEM), Energy Dispersive X-Ray Spectroscopy (EDS), and elemental mapping techniques. The as-synthesized MOF has been utilized as fluorescent probe for detection of nitro aromatic explosives (NAEs). The results show that the copper MOF can be developed into highly selective and sensitive sensor for detection of TNP in the aqueous medium via the "turn-off" quenching response. The linear fitting of the Stern-Volmer plot for TNP offered large quenching constant of 1.07 × 104 M-1 for Cu-MOF indicating the high sensitivity of the sensing process. Outstanding sensitivity of prepared material towards TNP detection was further validated by the low detection limit of 80 ppb (0.35 µM). The detailed mechanistic studies for their mode of action and density functional theory (DFT) calculations reveals that photo-induced electron transfer (PET) and fluorescence resonance energy transfer (FRET) processes, as well as electrostatic interactions (i.e. H-bonding) are the key factors for the turn-off response toward TNP by this fluorescent sensor. Thus, this new LMOF owing to their high water stability and remarkable functional features are potential candidates which can be developed into selective and sensitive TNP detection devices.