Photothermal Conversion Performance Research Articles

Functionalized SWCNTs as targeted co-delivery carriers to enhance the anticancer efficacy by mediating chemotherapy in coordination with photothermal therapy

As one of the powerful nanomaterials, single-walled nanotubes (SWCNTs) can be used in antitumor application field for targeted drug delivery. SWCNTs have also an excellent light absorption characteristic in the near-infrared area (NIR, 700-1400 nm), which can increase the temperature in a medium environment to realize hyperthermia. In this study, pristine SWCNTs were acidized by nitric acid and the shortened products (CNTs) were modified with NH2-PEG2000-NH2 and folic acid (FA). The resulting SWCNTs-PEG-FA were further coated by phase-change material (PCM)-1-Tetradecanol (TD) to adsorb photosensitizer indocyanine green (ICG). The final SWCNTs-PEG-FA-ICG/TD (CNTs-PFI/T) and other functionalized carriers were characterized and assessed in terms of various properties. The results showed that various modified SWCNTs had better monodispersity, stability, and biocompatibility. Especially, CNTs-PFI/T exhibited more excellent physical and chemical properties, as well as photothermal conversion performance under NIR laser irradiation (808 nm). In vitro experiment results demonstrated that CNTs-PFI/T@DOX could induce the apoptosis of MCF-7 cells and affect the cycle distribution more efficiently than other formulations, by mediating the coordination of chemotherapy and hyperthermia. In tumor-bearing model animals, CNTs-PFI/T@DOX similarly exhibited the highest antitumor activities among all the treatment groups. Thus, the functionalized CNTs-PFI/T designed in this study could be promising delivery systems to realize cooperative chemotherapy and photothermal therapy (PTT).

Alternating Donor-Acceptor Ladder-Type Heteroarene for Efficient Photothermal Conversion via Boosting Non-Radiative Decay.

The development of novel ladder-type conjugated molecules is crucial for advancing supramolecular chemistry and material science. In this study, we report a straightforward synthesis of new alternating donor-acceptor (D-A) ladder-type heteroarene, FCDTDPP, and demonstrate its application as photothermal agent for imaging and cancer therapy. FCDTDPP is constructed by vinylene bridge between cyclopentadithiophene (D) and diketopyrrolopyrrole (A) through intramolecular Friedel-Crafts type reaction. FCDTDPP exhibits unique combination of good molecular planarity, efficient intra/inter-molecular mixed D-A interactions, and local aromaticity. These features collectively contribute to its broad and intense absorptions with narrow bandgap in red band of the spectra, coupled with multiple vibrational absorption feature, thereby enhancing non-radiative decay process and resulting in efficient photothermal conversion property. FCDTDPP and its nanoparticles (NPs) exhibit superior photothermal conversion performance and stability under 660 nm laser irradiation. Moreover, in vitro studies reveal that FCDTDPP NPs possess excellent biocompatibility, low cytotoxicity, and robust photothermal therapeutic efficacy, a finding further corroborated by preliminary in vivo experiments in tumor-bearing mice. This work charts a novel course for the molecular engineering of organic photothermal conversion systems, propelling relevant research forward.

Alternating Donor‐Acceptor Ladder‐Type Heteroarene for Efficient Photothermal Conversion via Boosting Non‐Radiative Decay

The development of novel ladder‐type conjugated molecules is crucial for advancing supramolecular chemistry and material science. In this study, we report a straightforward synthesis of new alternating donor‐acceptor (D‐A) ladder‐type heteroarene, FCDTDPP, and demonstrate its application as photothermal agent for imaging and cancer therapy. FCDTDPP is constructed by vinylene bridge between cyclopentadithiophene (D) and diketopyrrolopyrrole (A) through intramolecular Friedel‐Crafts type reaction. FCDTDPP exhibits unique combination of good molecular planarity, efficient intra/inter‐molecular mixed D‐A interactions, and local aromaticity. These features collectively contribute to its broad and intense absorptions with narrow bandgap in red band of the spectra, coupled with multiple vibrational absorption feature, thereby enhancing non‐radiative decay process and resulting in efficient photothermal conversion property. FCDTDPP and its nanoparticles (NPs) exhibit superior photothermal conversion performance and stability under 660 nm laser irradiation. Moreover, in vitro studies reveal that FCDTDPP NPs possess excellent biocompatibility, low cytotoxicity, and robust photothermal therapeutic efficacy, a finding further corroborated by preliminary in vivo experiments in tumor‐bearing mice. This work charts a novel course for the molecular engineering of organic photothermal conversion systems, propelling relevant research forward.

FeOOH Quantum Dots Assembled MXene-Decorated 3D Photothermal Evaporator for Synergy Application in Solar Evaporation and Fenton Degradation.

Solar-driven water evaporation is considered as the sustainable approach to alleviate freshwater resource crisis through direct use of solar energy. However, it is still challenging to achieve the multifunctional solar evaporators equipped with both high evaporation and purification performance to handle practical complex wastewater. Here, a simple and cost-effective multifunctional 3D solar evaporator is prepared by alternately decorating the commercial sponge with FeOOH quantum dots (FQDs) supported MXene sheets composites and chitosan hydrogel coatings for enabling the solar water evaporation and organic wastewater photodegradation simultaneously. MXene composites allow the solar evaporator with excellent photothermal conversion performance, the hydrophilic chitosan hydrogel coated interconnecting skeleton structures of sponge serve as the mass transfer and water transport channels. The Fenton-catalytic FQDs anchored on the MXene sheets surface accept the photo-generated electrons of MXene sheets to induce the organic pollutant photo-Fenton degradation reaction under sunlight irradiation. The resulting evaporator possesses both excellent water evaporation rate of 2.54kg m-2h-1 and high degradation efficiency (99.24% for methylene blue), coupled with durable salt-resisting performance during long-term seawater desalination (20 wt.% NaCl). This work provides a simple and feasible strategy for designing multifunctional solar evaporators to meet the potential application scenarios in practice.

Dynamic regulation of the photothermal conversion performances of nano-enhanced phase change material composited with ceramic foam subjected to external fields

This study aims to comparatively analyze the melting characteristics of magnetic Fe3O4 nano-enhanced phase change materials (NEPCM) assisted by optimum filling strategies of Al2O3 foam ceramics, ultrasonic field and magnetic field under solar radiation. A visualization experimental platform consisting of an ultrasonic field, a magnetic field, and infrared thermography is constructed and used to evaluate in detail the evolution of the melting front, the temperature distribution, and the heat transfer mechanism under different experimental conditions in a square cavity. The results show that the 1 wt% NEPCM using an ultrasonic field has the highest solar energy conversion efficiency of 39.99 % among the 18 experimental groups. This suggests that the cavitation effect and acoustic flow effect induced by ultrasound with a power of 40 W periodic ultrasonic mechanical vibration improve the uniformity of the distribution of magnetic nanoparticles, resulting in improved heat transfer properties. In the experimental group where a magnetic field is applied, the downward movement of the melting interface is accelerated due to the force of the magnetic field on the Fe3O4 nanoparticle. Under the effect of localized porous filling, the solar conversion efficiency of 1 wt% NEPCM is 31.57 % and the total energy storage is as high as 14.39 kJ. With the increase of concentration, the solar conversion efficiency and total energy storage decrease gradually. However, under the simultaneous effect of magnetic field and localized porous filling, the solar conversion efficiency and energy storage show an opposite trend. From a comprehensive point of view, the application of periodic ultrasound with a power of 40 W can effectively improve the photothermal conversion capacity of the PCM.

Superhydrophobic, Multifunctional, and Mechanically Durable Carbon Aerogel Composites for High-Performance Underwater Piezoresistive Sensing.

Carbon aerogel piezoresistive sensors (CAPSs), owing to their good thermal stability, self-constructed conductive network, and fast response to pressure, have attracted extensive attention in the field of flexible and wearable electronics in recent years. However, it is still a great challenge for CAPSs to monitor subtle deformations and achieve high-performance underwater piezoresistive sensing. Herein, a superhydrophobic and electrically conductive carbon aerogel composite (CAC) was fabricated by the combination of fluorination of carbon aerogels and decoration of fluorinated halloysite nanotubes (HNTs). Due to the exceptional light absorption and excellent photothermal conversion performance, CAC has a fast and accurate response to temperature with a high-temperature coefficient of resistance (TCR) of -1.06%/°C. The resistance of CAC exhibits a linear response toward compressive strain up to 80% with a high gauge factor of -1.24. Significantly, the CAC sensor can effectively detect tiny deformations, thanks to its excellent waterproof performance, and it enables stable output of sensing signals in an underwater environment. This work provides new insights into the development of superhydrophobic, multifunctional, and mechanically durable piezoresistive sensors with potential applications in underwater flexible electronics.

Scalable ultrastrong MXene films with superior osteogenesis.

Titanium carbide MXene flakes have promising applications in aerospace, flexible electronic devices and biomedicine owing to their superior mechanical properties1 and electrical conductivity2 and good photothermal conversion3, biocompatibility4 and osteoinductivity5. It is highly desired yet very challenging to assemble MXene flakes into macroscopic high-performance materials in a scalable manner. Here we demonstrate a scalable strategy to fabricate high-performance MXene films by roll-to-roll-assisted blade coating (RBC) integrated with sequential bridging, providing good photothermal conversion and osteogenesis efficiency under near-infrared irradiation. MXene flakes were first bridged with silk sericin by hydrogen bonding and then assembled into macroscopic films using a continuous RBC process, followed by ionic bridging to freeze their aligned structure. The resultant large-scale MXene films with strong interlayer interactions are highly aligned and densified, exhibiting high tensile strength (755 MPa), toughness (17.4 MJ m-3) and electromagnetic interference (EMI) shielding capacity (78,000 dB cm2 g-1), as well as good ambient stability, photothermal conversion and bone regeneration performance. The proposed strategy not only paves a feasible way for realizing the practical applications of MXene in the fields of flexible EMI shielding materials and bone tissue engineering but also provides an avenue for the high-performance and scalable assembly of other two-dimensional flakes.

Ethylene vinyl acetate/copper sulphide with near-infrared light active shape memory behavior

This thesis presents the preparation of ethylene vinyl acetate (EVA)-based shape memory polymer composites (SMPC) (EVA/CuS) with near-infrared light photo-thermal response. The composites were prepared using EVA as the matrix material and copper sulphide (CuS) particles as the functional phase. The designability of SMPs was considered in the preparation of these composites. The results demonstrated that the incorporation of CuS, as a functional phase, enhanced the cross-linking degree and augmented the shape memory properties of EVA. Additionally, it served as a photo-thermal functional filler, imparting its photo-thermal properties. It can be observed that as the quantity of CuS particles incorporated into the EVA/CuS composite film increases, the photothermal conversion performance of the composite film improves, the shape fixation rate rises, and the rate of recovery of light-responsive shape memory accelerates. The temperature of the composites increased to 116.7°C in 20 s when the CuS addition was 2 wt% and the NIR light intensity was 0.5 W/cm2. At a NIR light intensity of 0.6 W/cm2, the “U” shape of the sample was restored to a straight state in 30 s, and the shape recovery rate reached 100%. In this experiment, optical near-infrared photostimulation-responsive EVA/CuS composites have been successfully prepared. These composites demonstrate the ability to achieve remote control and fast response of EVA shape memory behavior, offering a new avenue for the preparation of photo-responsive EVA-based shape memory materials.

Plasmonic Copper‐Ruthenium Superstructure for Efficient Photothermal Conversion and Plastic Recycling

AbstractPlasmonic superstructures offer broad prospects in photothermal catalysis, yet their controllable synthesis remains a challenge. Here, a controlled synthesis method for Cu‐Ru plasmonic superstructures via a one‐step polyol reduction process is presented, where Cu nanoparticles serve as the core, while the shell is formed from Ru nanoclusters. Through a comprehensive investigation of the growth mechanism, precise control over the composition and size of the superstructures is achieved. Finite‐difference time‐domain simulations and photothermal conversion experiments demonstrated that the optimized Cu3Ru1 superstructures possess strong light absorption capabilities and efficient photothermal conversion performance. These properties are effectively utilized in the photothermal recycling of waste polyethylene and polyethylene terephthalate, marking a significant advance in employing Cu‐based plasmonic materials for sustainable catalytic technology.

Dual-functional boron nitride boosts photothermal conversion performance and thermal conductivity of wood-inspired cellulose-based phase change materials for infrared stealth and personal thermal management

Phase change materials (PCMs) can absorb heat energy from the sunlight and release thermal energy to keep the thermal comfort of humans in harsh cold environments. However, the leakage problem, low photothermal conversion performance, and poor thermal conductivity limit their practical applications. Herein, a wood structure-inspired porous cellulose nanofibers (CNFs) aerogel was used to relieve the leakage problem of lauryl alcohol PCM. A novel boron nitride (BN)/silver nanoparticles (AgNPs) complex was fabricated by using gallic acid as a green reduction agent and used to enhance photothermal conversion performance and thermal conductivity of CNFs/lauryl alcohol composite. The localized surface plasmon resonance (LSPR) and unique heat transfer paths of BN/Ag complex endow the resulting CNFs-based PCM with extraordinary photothermal conversion capacity (surface temperature of 58.2 ℃ under 1 kW m−2) and higher thermal conductivity. Combined with the high phase change enthalpy (172.90 J g−1), the resulting CNFs-based PCM showed potential applications in infrared stealth and personal thermal management fields. This work will open up a new avenue for fabricating a novel photothermal BN/Ag complex and provide a new idea for developing a multifunctional CNFs-based PCM for multi-scenario applications.

Graphene aerogel with double pore structure for marine oil spill emergency response

Due to its high porosity, large specific surface area, and strong photothermal conversion performance, graphene aerogel has unique advantages in the field of pollution treatment, especially in the field of recovering highly viscous oils. However, for the treatment of highly viscous oils, the high adsorption capacity and high adsorption rate of graphene aerogel often cannot be combined, which is one of the important reasons limiting its development in this field. A double-step templating strategy for graphene aerogels preparation was used in this work, i.e., Pickering emulsion soft templating and unidirectional freeze casting. Specifically, the dense Pickering emulsion droplets can be stabilized in a short period of time, so that they can be cured quickly. After that, graphene aerogels (DGA-0.8-25) with dual pore structure were prepared by unidirectional freeze casting technology to further form aligned pores based on the pores formed by the Pickering emulsion droplet soft template. The dense presence of Pickering emulsion droplets gives DGA-0.8-25 an ultra-high porosity (96.8 %), which can adsorb 184.53 times its own mass of crude oil. Due to the unidirectional pore structure, the adsorption rate of DGA-0.8-25 on crude oil is as high as 8.39 g·g−1·min−1, which realizes dual improvement of the adsorption capacity and rate of graphene aerogel on crude oil and shows a good application prospect in the treatment of high viscosity crude oil. In addition, DGA-0.8-25 has unique advantages in the field of oil–water separation, with a separation efficiency of 99.04 % for water-in-oil emulsions and 97.63 % for oil-in-water emulsions. When repeated used in photothermal adsorption of highly viscous oil, DGA-0.8-25 can still maintain more than 90.61 % of its initial adsorption capacity after ten cycles of use-regeneration. Because of its unique advantages such as high efficiency and low cost, DGA shows promising in its future large-scale use.

Ultrathin, flexible, and high-performance bacterial cellulose/copper nanowires film for broadband electromagnetic interference shielding and photothermal conversion

The swift advancements in wearable electronics, implantable medical devices, fifth-generation mobile communication, unmanned aerial vehicles, and military stealth technology have led to a surge in demand for highly flexible multifunctional films. Consequently, the enhancement of electromagnetic radiation and the requirement for normal operation in extreme environments have posed significant challenges for flexible electromagnetic interference (EMI) shielding films. In this paper, ultra-thin, flexible bacterial cellulose (BC)/copper nanowires (CuNWs) (BCu) films with Janus structure are prepared by the combination of microwave-assisted hydrothermal synthesis and vacuum filtration method, which can be used for broadband EMI shielding and photothermal conversion. BCu films demonstrate exceptional mechanical properties, boasting a tensile strength range from 48.5 to 77.3 MPa, accompanied fracture strain 4.1–5.9 %. When CuNWs mass in Janus film increases to 10 mg, the conductivity of BCu-4 Janus films can reach 4761.90 S cm−1. The ultra-strong EMI shielding effectiveness (SE, above 56.00 dB) is achieved in 6–26.5 GHz for BCu-4 film with an ultra-thin thickness (16 μm). Moreover, the specific EMI SE of BCu-4 is as high as 4294.38 dB mm−1. Furthermore, BCu Janus films exhibit outstanding photothermal conversion performance. A saturation temperature of BCu-4 Janus film reaches as high as 75 °C under irradiation of one sunlight (100 mW cm−2). The facile and collaborative strategy is provided for fabricating ultra-thin, flexible multifunctional Janus films with EMI shielding and photothermal conversion capabilities, addressing EMI problems in modern electronic technology and offering new avenues for applications in various fields.

Multi‐Enzyme Mimetic MoCu Dual‐Atom Nanozyme Triggering Oxidative Stress Cascade Amplification for High‐Efficiency Synergistic Cancer Therapy

AbstractSingle‐atom nanozymes (SAzymes) with ultrahigh atom utilization efficiency have been extensively applied in reactive oxygen species (ROS)‐mediated cancer therapy. However, the high energy barriers of reaction intermediates on single‐atom sites and the overexpressed antioxidants in the tumor microenvironment restrict the amplification of tumor oxidative stress, resulting in unsatisfactory therapeutic efficacy. Herein, we report a multi‐enzyme mimetic MoCu dual‐atom nanozyme (MoCu DAzyme) with various catalytic active sites, which exhibits peroxidase, oxidase, glutathione (GSH) oxidase, and nicotinamide adenine dinucleotide phosphate (NADPH) oxidase mimicking activities. Compared with Mo SAzyme, the introduction of Cu atoms, formation of dual‐atom sites, and synergetic catalytic effects among various active sites enhance substrate adsorption and reduce the energy barrier, thereby endowing MoCu DAzyme with stronger catalytic activities. Benefiting from the above enzyme‐like activities, MoCu DAzyme can not only generate multiple ROS, but also deplete GSH and block its regeneration to trigger the cascade amplification of oxidative stress. Additionally, the strong optical absorption in the near‐infrared II bio‐window endows MoCu DAzyme with remarkable photothermal conversion performance. Consequently, MoCu DAzyme achieves high‐efficiency synergistic cancer treatment incorporating collaborative catalytic therapy and photothermal therapy. This work will advance the therapeutic applications of DAzymes and provide valuable insights for nanocatalytic cancer therapy.

Dual-emission carbon dots-based biosensor for polarity/targeting bimodal recognition and mild photothermal therapy of tumor

It is essential to develop a multifunctional nanoplatform for biosensing, tumor diagnosis and treatment simultaneously. Herein, dual-emission fluorescent carbon dots (HA-CDs) were fabricated via a one-pot solvothermal method using spinach powder as carbon source and hyaluronic acid (HA) as targeting agent. The obtained HA-CDs exhibited outstanding optical properties, good targeted tumor and excellent photothermal conversion performance. Interestingly, HA-CDs can sensitively perceive the changes in polar environments attributed to the inherent ratiometric fluorescence characteristics, and combined with the intrinsic targeting tumor ability achieved tumor cell recognition. More importantly, the HA-CDs possess good photothermal conversion efficiency of 21.2 % to be beneficial for photothermal therapy of tumors. The survival rate of HeLa cells incubated with HA-CDs dramatically decreased to 14 % after 660 nm laser irradiation, revealing the significant tumor inhibition of HA-CDs in vitro. Notably, through individual intraperitoneal and intratumoral injection, it was found that HA-CDs demonstrated a similar tumor suppressed effect on 4T1 tumor-bearing mice exposed to laser irradiation, fully uncovering that HA-CDs can efficiently accumulate at tumor site by intraperitoneal injection. Besides, the histopathological analysis of major organs ex vivo revealed a good biosafety profile. Collectively, this strategy of designed HA-CDs provides a new multifunctional nanoplatform for potential clinical application.

MoS2 Lubricate-Toughened MXene/ANF Composites for Multifunctional Electromagnetic Interference Shielding

HighlightsThe introduction of MoS2 generates a “kill three birds with one stone” effect to the original binary MXene/ANF system: lubrication toughening mechanical performance; reduction in secondary reflection pollution of electromagnetic wave; and improvement in the performance of photothermal conversion.After the introduction of MoS2 into MXene/ANF (60:40), the strain and toughness were increased by 53.5% (from 18.3% to 28.1%) and 61.7% (from 8.9 to 14.5 MJ m−3), respectively. Fortunately, the SER decreases by 22.4%, and the photothermal conversion performance was increased by 22.2% from ~ 45 to ~ 55 °C.

Photothermal Conversion Performance of Fe3O4/ATO Hybrid Nanofluid for Direct Absorption Solar Collector

In order to enhance the efficiency of direct absorption solar collectors, this study carried out an experimental analysis about the optical and photothermal conversion performance of Fe3O4, ATO (Antimony-doped tin oxide), and Fe3O4/ATO nanofluids with a total concentration of 0.1 wt%. According to the results of the experiments, Fe3O4 nanofluid outperforms ATO nanofluid in terms of optical absorption; nevertheless, at wavelengths shorter than 600 nm, it also shows significant scattering reflection. The solar-weighted absorption coefficient of Fe3O4/ATO nanofluid rose from 0.863 (mFe3O4/mTotal = 0.2) to 0.932 (mFe3O4/mTotal = 0.8) when the optical path length increased from 0.01 m to 0.06 m. Moreover, the Fe3O4/ATO hybrid nanofluid achieved a photothermal conversion efficiency of 0.932 when the mass ratio of Fe3O4 to total mass was 0.2, surpassing the efficiencies of 0.892 and 0.898 recorded for 0.1 wt% ATO and Fe3O4 nanofluids, respectively. When present together, the opposing optical characteristics of Fe3O4 and ATO boost photothermal conversion performance, which is anticipated to raise the efficiency of direct absorption solar collectors.

Polymorphic Supramolecular Therapeutic Platforms with Precise Dye/Drug Ratio to Perform Synergistic Chemo-Photo Anti-Tumor Therapy and Long-Term Immune Protection.

Malignant tumor has become one of the hellish killers threatening the health of people around the world, its diagnosis and treatment has become the concerns of public. However, the optimal therapeutic dose, undesired side-effect, and long-term immune activation werekey and bottleneck problems in tumor treatment. Herein, different batches of supramolecular therapeutic platforms, including vesicles, spherical nanoparticles, and cylindrical nanorods, with precise ratios of dye to drug (1:2) and multiple stimulus responsiveness wereconstructed by host-guest complexation between cyanine-camptothecin conjugates (IR780-CPT2) and β-cyclodextrin (β-CD) pendent hydrophilic copolymers. The reduction responsiveness, near-infrared photothermal conversion and singlet oxygen (1O2) generation performances endowed these platforms excellent cancer cells killing effect in both of in vitro cellular experiments and in vivo mice models. More importantly, without affecting the weight of mice, the maturation of dendritic cells, proliferation of T cells, up-regulation of high mobility group protein B1, and reduction of immunosuppressive regulatory T cells weredetected after employing a synergistic chemo-photo therapy, demonstrating the body's immune effect was successfully activated. Thus, during the treatment of primary tumor, the distal tumor was also inhibited. Webelieve this work could provide a distinctive way to fabricate supramolecular theranostic platforms with different morphologies and improve antitumor and antimetastasis capabilities.

Bifunctional Photothermal Evaporator Based on an MXene/Fe-MOF Collaborative Effect toward Efficient Solar Steam Generation and Simultaneous VOC Removal.

Solar-driven interfacial water evaporation has become one of the most promising approaches to effectively harvesting freshwater, yet the fabrication of high-performance and multifunctional solar interfacial evaporators (SIEs) still remains a huge challenge to date. In this study, a multifunctional MXene and Fe-MOF@cellulose acetate/polyvinylpyrrolidone (MXM@CP) SIE was prepared via a facile "electrospinning and suction filtration deposition" coupling strategy. Thanks to the incorporation of MXene, MXM@CP displayed excellent photothermal conversion performance. Together with the fast water transport channel provided by the porous cellulose acetate electrospinning substrate, a remarkable solar-driven water evaporation property was achieved for MXM@CP, showing a higher water evaporation rate of 1.1 kg m-2 h-1 under one sun irradiation. Moreover, the resultant composite film also exhibited excellent Fenton catalytic activity to effectively degrade volatile organic compounds (VOCs) due to the synergistic effect of the MXene and Fe-based MOF (Fe-MOF). Particularly, a relatively higher degradation rate of 82.8% was acquired for the resulting evaporator toward the benzene contaminant. These results provide new insights into the construction of high-performance and multifunctional SIEs toward clean freshwater collection from the VOC-contaminated water system.

Fabrication of Low-Cost Porous Carbon Polypropylene Composite Sheets with High Photothermal Conversion Performance for Solar Steam Generation.

The development of absorber materials with strong light absorption properties and low-cost fabrication processes is highly significant for the application of photothermal conversion technology. In this work, a mixed powder consisting of NaCl, polypropylene (PP), and scale-like carbon flakes was ultrasonically pressed into sheets, and the NaCl was then removed by salt dissolution to obtain porous carbon polypropylene composite sheets (P-CPCS). This process is simple, green, and suitable for the low-cost, large-area fabrication of P-CPCS. P-CPCS has a well-distributed porous structure containing internal and external connected water paths. Under the dual effects of the carbon flakes and porous structure, P-CPCS shows excellent photothermal conversion performance in a broad wavelength range. P-CPCS-40 achieves a high temperature of 128 °C and a rapid heating rate of 12.4 °C/s under laser irradiation (808 nm wavelength, 1.2 W/cm2 power). When utilized for solar steam generation under 1 sun irradiation, P-CPCS-40 achieves 98.2% evaporation efficiency and a 1.81 kg m-2 h-1 evaporation rate. This performance means that P-CPCS-40 outperforms most other previously reported absorbers in terms of evaporation efficiency. The combination of carbon flakes, which provide a photothermal effect, and a porous polymer structure, which provides light-capturing properties, opens up a new strategy for desalination, sewage treatment, and other related fields.

Synergetic integration of photothermal and self-cleaning features in a composite phase change material based on layered double hydroxides and polypyrrole

Composite phase change materials (PCMs) with photothermal functionality play a crucial role in efficiently storing and utilizing solar energy. However, the challenge of effectively removing of contaminants on photothermal conversion coatings has long puzzled researchers. In this study, we propose a novel approach to enhancing both photothermal conversion performance and self-cleaning properties of wood-based composite phase change materials, ultimately facilitating the sustainable and effective utilization of solar energy. The method utilized metal-organic frameworks (MOFs) as a precursor to form rough layered double hydroxides (LDH) on the wood surface through hydrolysis-induced exchange. Subsequently, polypyrrole (PPy) was deposited through vapor phase onto the LDH, and paraffin wax (PW) is utilized as the phase change material to prepare a novel composite phase change material. This modified wood structure facilitates leak-proof PW encapsulation and effective heat storage (167.6 J/g). PPy acts as a proficient photothermal converter and improves the composite material's heat transfer efficiency by establishing thermal conduction pathways, resulting in an 87.4 % enhancement in thermal conductivity compared to pure PW. The rough surface of LDH promotes multiple light reflections and scattering within the material, leading to increased light absorption by the PPy coating and achieving a photothermal conversion efficiency of up to 96.4 %. Furthermore, the high roughness of the LDH layer combined with the low surface energy of PW imparts superhydrophobic self-cleaning properties to the material, ensuring sustained effectiveness of the photothermal conversion coating over time. This research presents a viable approach for maintaining the cleanliness and efficiency of solar energy systems.