Photothermal Conversion Performance Research Articles

Genetic Engineering Bacillus thuringiensis Enable Melanin Biosynthesis for Anti-Tumor and Anti-Inflammation.

Collaboration between cancer treatment and inflammation management has emerged as an integral facet of comprehensive cancer care. Nevertheless, the development of interventions concurrently targeting both inflammation and cancer has encountered significant challenges stemming from various external factors. Herein, a bioactive agent synthesized by genetically engineering melanin-producing Bacillus thuringiensis (B. thuringiensis) bacteria, simultaneously achieves eco-friendly photothermal agent and efficient reactive oxygen/nitrogen species (RONS) scavenger benefits, perfectly tackling present toughies from inflammation to cancer therapies. The biologically derived melanin exhibits exceptional photothermal-conversion performance, facilitating potent photonic hyperthermia that effectively eradicates tumor cells and tissues, thereby impeding tumor growth. Additionally, the RONS-scavenging properties of melanin produced by B. thuringiensis bacteria contribute to inflammation reduction, augmenting the efficacy of photothermal tumor repression. This study presents a representative paradigm of genetic engineering in B. thuringiensis bacteria to produce functional agents tailored for diverse biomedical applications, encompassing inflammation and cancer therapy.

Durable microstructure-based superhydrophobic composite with photothermal performance for multifunctional application

Nowadays, multifunctional superhydrophobic coating has drawn widespread attention by virtue of its great water-repellent property, whereas the fragile mechanical and chemical durability of superhydrophobic coating greatly limits its practical application. Herein, a robust and multifunctional superhydrophobic composite coating (CFRE-SP@Fe3O4) with anti-corrosion, delay-icing and self-deicing performance is constructed via simple imprinting-demolding process on the carbon fiber reinforced epoxy resin (CFRE) surface and post-deposition modification with polydimethylsiloxane (PDMS) and epoxy resin modified Fe3O4 nanoparticles. The obtained CFRE-SP@Fe3O4 coating displays a superhydrophobic property with a WCA of 155° ± 1.2°. By virtue of the protection effect of the robust micro-grid structures for the inner superhydrophobic Fe3O4 nanoparticles (SP@Fe3O4), the CFRE-SP@Fe3O4 coating still maintains great superhydrophobicity after linear friction for 100 times. Additionally, compared with the carbon steel treated with CFRE, the impedance modulus at lowest frequency of CFRE-SP@Fe3O4 coating treated group further increase with a value of 107 Ω·cm2, confirming the excellent anti-corrosion performance. Owing to the air pocket captured by the micro-/nanostructure on the superhydrophobic surface, the icing time of the CFRE-SP@Fe3O4 surfaces extends from 60 s to 2130 s. Moreover, combined with the photothermal conversion performance of carbon fiber and Fe3O4 nanoparticles, the ice on the CFRE and CFRE-SP@Fe3O4 coatings surfaces begin to melt 137 s, displaying the excellent self-deicing performance.

Multi-responsive cascade enzyme-like catalytic nanoassembly for ferroptosis amplification and nanozyme-assisted mild photothermal therapy

Ferroptosis is greatly restricted by low reactive oxygen species (ROS) generation efficiency, and the inherent self-protection mechanism originating in heat shock proteins (HSPs) seriously impedes the efficiency of photothermal therapy (PTT). Herein, we designed an intelligent strategy utilizing cascade catalytic nanoassemblies (Au@COF@MnO2) with triple-enzyme activity for amplifying ferroptosis therapy and improving the efficiency of PTT in tumor. Gold nanozyme was encapsulated within a hollow manganese dioxide (MnO2) shell with the help of covalent organic frameworks (COFs). The nanoassemblies possess the ability of photothermal conversion. Mechanism studies suggested that glutathione (GSH) depletion by Au@COF@MnO2 leads to the inactivation of glutathione peroxidase 4 (GPX4). This effect synergized with Mn2+-mediated reactive oxygen species (ROS) generation to enhance the accumulation of lipid peroxide (LPO), thereby inducing high-efficiency ferroptosis. Notably, gold nanozyme facilitated the conversion of glucose into gluconic acid and hydrogen peroxide (H2O2). This process augmented the endogenous H2O2 levels necessary for Fenton chemistry, which could effectively promote the generation of ROS. Simultaneously, glucose depletion downregulated the expression of HSPs induced by hyperthermia, consequently reducing cellular heat resistance for enhancing PTT. Therefore, the cascade catalytic nanoassembly not only exhibits high tumor inhibition and admirable biosafety, but also possesses trimodal imaging performance for imaging-guided tumor therapy in vivo, holding great potential for clinical application. Statement of significanceThis study engineered multi-responsive cascade catalytic nanoassembly (Au@COF@MnO2) with triple enzymatic functions for amplifying ferroptosis therapy and improving the efficiency of PTT in tumor. The nanoassembly exhibited multi-responsive release and great photothermal conversion performance. Glucose consumption-evoked starvation downregulated the hyperthermia-induced expression of HSPs in tumor cells, thereby improving the efficacy of PTT. Mechanism studies suggested that GSH depletion by Au@COF@MnO2 lead to the inactivation of GPX4, which synergized with Mn2+-mediated ROS generation to bolster the accumulation of LPO, thereby inducing high-efficiency ferroptosis. Moreover, the nanoassembly demonstrated trimodal (PT, PA, and MR) imaging in vivo, enabling the visualization of the tumor treatment with nanoassembly. Such nanoassembly exhibited high tumor inhibition and admirable biosafety in tumor therapy in vivo, holding a great potential for clinical application.

An NIR-responsive hydrogel loaded with polydeoxyribonucleotide nano-vectors for enhanced chronic wound healing

Chronic diabetic wounds are difficult to treat due to imbalanced inflammatory responses, high blood glucose levels, and bacterial infections. Novel therapeutic approaches based on nucleic acid analogues have been proposed, with unique advantages in improving angiogenesis, increasing collagen synthesis, and exerting anti-inflammatory effects. However, the inherent electronegativity of nucleic acids makes them less susceptible to cellular uptake. In this paper, a kind of near infrared (NIR)-responsive nanocomposite hydrogel loaded with nucleic acid vectors was proposed for promoting wound healing. The redox system composed of molybdenum disulphide nanosheets (MoS2 NSs) initiated the copolymerization of quaternized chitosan containing double bonds and N-isopropylacrylamide (NIPAAm) to form the matrix. In addition, MoS2 NSs with photothermal conversion performance endow the nanocomposite hydrogel to have NIR-response property and act as physical crosslinking points in the matrix. Polydeoxyribonucleotides (PDRN), which have the effect of promoting wound healing, were made into nucleic acid vectors, and loaded into the NIR-responsive hydrogel. MoS2 NSs can convert NIR irradiation into heat, causing phase transitions of temperature-sensitive segments that trigger volume contraction of the hydrogel to extrude the nucleic acid vector. Promoting angiogenesis, slowing inflammation, and guiding tissue regeneration were demonstrated in the diabetic wound model treated with the NIR-responsive nanocomposite hydrogel.

Plant transpiration inspired biomass-derived solar evaporator for highly efficient solar vapor generation

The interface solar evaporation is an energy-saving and environmentally friendly method for seawater desalination and sewage purification. In this work, a biomimetic solar evaporator (ppy@AZL) inspired by plant transpiration was designed to achieve high efficient vapor generation. The ppy@AZL evaporator was made of zizania latifolia as raw material, has a cellulose skeleton with high water transport after alkalization and was decorated with photothermal polypyrrole to form bionic branches and leaves, and has excellent photothermal conversion performance. The evaporation performance and potential application of ppy@AZL evaporator in seawater desalination and sewage treatment were studied. The results indicated that the average evaporation rate of the ppy@AZL in simulated seawater (3.5 wt%) under the irradiation of one sun (1 kW m−2) was 2.239 kg m−2 h−1, and the photothermal conversion efficiency was 93.4 % in this work. In addition, the ppy@AZL evaporator has excellent evaporation rate of 2.668 kg m−2 h−1 in 9 h outdoor continuous evaporation experiment of simulated seawater (3.5 wt%), and can continuously and stably generate vapor. Therefore, this study provided a new solar evaporator with low-cost, simple preparation, better salt resistance, and high evaporation performance for seawater desalination and sewage treatment.

Borate ester hybrid photothermal nanofluid derived from C3N4/MoS2 catalyzed esterification for efficient organic-inorganic synergistic lubrication

The inferior dispersion stability and simple functionality of MoS2-based nanofluids restrict their efficient application in lubrication. Herein, a novel nanofluid composed of C3N4/MoS2, 3-isocyanatopropyltrimethoxysilane, and C3N4/MoS2-catalyzed product (polyethylene glycol-borate ester, PEG-BA) was proposed. C3N4 nanosheets could induce the formation of regular MoS2 nanospheres. The resulting C3N4/MoS2 showed excellent catalytic activity for the esterification of PEG-BA. The C3N4/MoS2 @PEG-BA nanofluid exhibited favorable dispersion stability in PEG600 with no stratification for ≥ 82 days. The addition of 3.0 wt% C3N4/MoS2 @PEG-BA nanofluid could significantly reduce friction coefficient (30.7 %) and wear scar diameter (28.9 %). The excellent lubrication properties of the nanofluid are attributed to the synergistic lubrication effect of C3N4/MoS2 and PEG-BA. Furthermore, the nanofluid exhibits remarkable photothermal conversion performance in both oil and air mediums.

Enhanced photothermal conversion properties of graphene aerogel surface and its application in oil spill treatment

As an environmentally friendly material, graphene aerogel has been widely studied. The photothermal conversion performance is an important property of graphene aerogel. Graphene aerogels were prepared by hydrothermal reduction method. The factors affecting its surface photothermal conversion properties were explored and graphene aerogels with ideal photothermal conversion properties were obtained. In addition, COMSOL Multiphysics simulation was carried out to further analyze the intrinsic factors affecting the photothermal properties of the materials. The prepared materials were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and Raman spectrometry (Raman) to obtain their physicochemical properties. UV–visible-near infrared spectrophotometer and microcomputer-controlled electronic universal testing machine were used to evaluate the light-absorbing capacity and mechanical properties of the materials. The obtained graphene aerogel can be rapidly heated up to higher than 110 °C in 8 s on its surface under simulated sunlight (1000 W·m−2) irradiation. When used for the treatment of oil spill at sea, the prepared graphene aerogel with good photothermal conversion ability can adsorb 105.61 times of its own weight of crude oil and the adsorption rate is as high as 10.56 g·g−1·min−1, which shows a broad application prospect.

Innovative dual-mode device integrating capacitive desalination and solar vapor generation for high-efficiency seawater desalination

Solar-driven interface evaporation with high solar-to-steam conversion efficiency has shown great potential in seawater desalination. However, due to the influence of latent heat and condensation efficiency, the water yield from solar-driven interface evaporation remains insufficient, posing a significant challenge that requires resolution. In this work, we designed a dual-mode high-flux seawater desalination device that combines solar-driven interface evaporation and capacitive desalination. By utilizing coupled desalination materials exhibiting both photothermal conversion and capacitance activity, the device demonstrated photothermal evaporation rates of 1.41 and 0.97 kg m−2 h−1 for condensate water yield under one-sun irradiation. Additionally, the device exhibited a salt adsorption capacity of up to 48 mg g−1 and a salt adsorption rate of 2.1 mg g−1 min−1. In addition, the salt adsorption capacity increased by approximately 32% under one-sun irradiation. Furthermore, photo-enhanced capacitive desalination performance was explored through numerical simulations and theoretical calculations. Theoretical calculations and characterizations confirmed that the defect energy levels formed by the introduction of sulfur vacancies can effectively widen the light absorption range, improve photothermal conversion performance, and stimulate more photoelectrons to participate in capacitive desalination. Concurrently, the electron distribution state of molybdenum disulfide with sulfur vacancies and surface defect sites contributes to ion/electron transport at the solid-liquid interface. This work provides a novel pathway for integrating solar vapor generation with other low-energy desalination technologies.

Lignin-based vitrimer containing dynamic borate ester bonds with intrinsic photoconversion and excellent photothermal remoldability

The development of photoresponsive shape memory materials based on the photothermal conversion properties of lignin and the low activation energy of the dynamic covalent borate bond is of great importance. In this paper, a kind of lignin-based vitrimer polymer (LBP) containing dynamic boronic ester bonds was prepared by a “sulfhydryl-epoxy” click reaction and etherification reaction. The results show that the rigid segment EP-EL (lignin-based epoxy resin) and BDB (2,2′-(1,4-phenylene)-bis-[4-mercapto-1,3,2-dioxaneborane]) with benzene ring structure can impart tensile strength (20.8 MPa) to the LBP, while the flexible segment PEG imparts good elongation at break (15 %). The dynamic binding and dissociation exchange mechanism of the boronic ester bonds enables LBP to exhibit thermal remodelling properties (up to 36.2 %) and water-assisted self-healing properties at room temperature (up to 49.0 %). In addition, LBP exhibits excellent thermal and light-responsive shape memory properties due to its own photothermal conversion performance (photothermal conversion efficiency up to 18.2 %) and the dynamic boronic ester bond thermal activation bond exchange mechanism. The insulating properties of LBP make it suitable for use in high temperature protection circuit devices and light-responsive circuit devices. This study provides new insights into the design and application of Vitrimer and photoresponsive shape memory polymers, and also offers a new avenue for high-value utilization of lignin.

Nature-inspired ultrathin wood-based interfacial solar steam generators for high-efficiency water purification

Here, inspired from butterfly wing, novel hierarchical biomimetic structures composed of tunable nano-structured surfaces, rich micro/nanopores and aligned grooves from polythiophene decorated fir wood veneer have been developed to solve it. Nanowire-shaped and button-like nanostructured polythiophenes as light absorption enhanced materials were in situ grown on wood surface by adjustable vapor deposition process (PFW and CPFW). Meanwhile, wood veneer with reversed-tree structure has a unique aligned grooves surface from split tracheids, serving as the substrate for the nanostructured polythiophenes. These ultrathin wood-based solar steam generators (0.6 mm) stand as one of the thinnest reported self-floating photothermal materials based on wood. Meanwhile, high evaporation flux (1.42 and 1.48 kg·m−2·h−1) and solar-to-vapor efficiencies (88.5 % and 92.4 %) for PFW and CPFW are acquired under 1 sun irradiation. Their structure superiority boosting photothermal conversion performance has been further verified by COMSOL simulated results. The synthesized solar steam generator exhibits exceptional capabilities in seawater desalination and wastewater treatment, demonstrating fantastic application potential in water purification.

Poly(lactic Acid)/Cesium Tungsten Bronze Fibers with Good Dyeability and High Photothermal Conversion Performance

Poly(lactic Acid)/Cesium Tungsten Bronze Fibers with Good Dyeability and High Photothermal Conversion Performance

Radiation and nanoparticle interaction for enhanced light absorption and heat conversion

The photo-thermal conversion performance (PTCP) of water-based nanofluids in a volumetrically heated solar collector (VHSC) is evaluated. The influences of nanoparticle volume concentration (NVC), particle size, Reynolds number, operating temperature, and collector geometry on the PTCP are numerically investigated. The utilization of nanoparticles and improving their concentration is found to enhance the photo-thermal conversion efficiency (PTCE) of the collector by augmenting the energy from the sun of the working fluid due to the radiation-nanoparticle interactions. The PTCE enhancement of Graphite, TiO2 and Ag nanoparticles dispersed in water is respectively 1.37, 1.33 and 1.29 times better, compared to that of water. This is further augmented by adding MgO nanoparticles to TiO2, Graphite and Ag particles, resulting in 1.69, 1.67 and 1.59x improved efficiency. Enhancing the flow rate of the fluids also contributes to the PTCE by reducing the losses of thermal from the collector to the ambient. Besides, the enhanced nanoparticle size increases the overall PTCP as it enables the nanofluid to absorb more solar energy. Enhancing the collector length accelerates the thermal loss to the ambient, as a result the system performance diminishes. It is also regarded that the heat absorption of the nanofluid declines with improving inlet temperature of the working fluid.

Environment-responsive dopamine nanoplatform for tumor synergistic therapy

Nanoparticle-based photothermal therapy (PTT) has emerged as a promising approach in tumor treatment due to its high selectivity and low invasiveness. However, the penetration of near-infrared light (NIR) is limited, leading it fails to induce damage to the deep-seated tumor cells within the tumor tissue. Additionally, inefficient uptake of photothermal nanoparticles by tumor cells results in suboptimal outcomes for PTT. In this study, we utilized the adhesive properties of photothermal material, polydopamine (PDA), which can successfully load the photosensitizer indocyanine green (ICG) and chemotherapeutic drug doxorubicin (DOX) to achieve photothermal and chemotherapy synergy treatment (PDA/DOX&ICG), aiming to compensate the defects of single tumor treatment. To extending the blood circulation time of PDA/DOX&ICG nanoparticles, evading clearance by the body immune system and achieving targeted delivery to tumor tissues, a protective envelopment was created using erythrocyte membranes modified with folate acid (FA-EM). After reaching the tumor tissue, the obtained FA-EM@PDA/DOX&ICG nanoparticles can specific bind with folate acid receptors on the surface of tumor cells, which can improve the uptake behavior of FA-EM@PDA/DOX&ICG nanoparticles by tumor cells, and leading to the release of loaded DOX and ICG in response to the unique tumor microenvironment. ICG, as a typical photosensitizer, significantly enhances the photothermal conversion performance of FA-EM@PDA/DOX&ICG nanoparticles, thus inducing tumor cells damage. In vitro and in vivo experimental results demonstrated that the coordinated NIR treatment with FA-EM@PDA/DOX&ICG not only effectively inhibits tumor growth, but also exhibits superior biocompatibility, effectively mitigating DOX-induced tissue damage.

Asymmetric Ba0.7Sr0.3CoO3-δ/MXene solar evaporators for enhanced treatment of high salinity organic wastewater: Improving salt deposition control and pollutant removal

Solar-driven interfacial evaporation (SIE) utilizes solar thermal energy to produce clean water, addressing the water-energy paradox. However, challenges like photothermal conversion performance and salt deposition limit its adoption. Additionally, when SIE is applied to organic wastewater treatment, volatile organic compounds (VOCs) in the distilled water can diminish water purification efficiency. In this study, we developed a Ba0.7Sr0.3CoO3-δ/MXene composite solar evaporator capable of simultaneous removal of organic matters (93.70 % removal of 4-chlorophenol) with high evaporation performance (1.50 kg m−2 h−1) during the evaporation of salt-containing organic wastewater. The incorporation of Ba0.7Sr0.3CoO3-δ into the composite significantly enhanced the photothermal conversion capacity, improving the evaporation efficiency. The organic pollutant removal activity of Ba0.7Sr0.3CoO3-δ stemmed from lattice oxygen, which was activated by photothermal conversion heat. The incorporation of Ba0.7Sr0.3CoO3-δ and MXene in the solar evaporator significantly enhances the photothermal conversion performance. Additionally, the innovative asymmetric edge structure effectively addresses the salt deposition issue and enables the removal of organic pollutants through in situ utilization of heat generated from photothermal conversion. This approach offers a subtle yet effective strategy for mitigating pollutant accumulation in the solar interfacial evaporation process, ensuring long-term water purification and clean water production.

Double-network aerogel-based eutectic composite phase change materials for efficient solar energy storage and building thermal management

Phase change materials (PCMs) have shown great promise in solar energy storage and thermal management of buildings. Nevertheless, the solid-liquid PCMs currently used in these applications face multiple challenges that need to be addressed, such as inadequate solar absorption capacity, leakage issues, and low phase change enthalpy. In this research, urea and sodium acetate trihydrate (SAT) were employed as the main PCMs, while disodium hydrogen phosphate dodecahydrate (DHPD) served as the nucleating agent. Additionally, we used polyvinyl alcohol/silica (PVA/SiO2) aerogel as a porous support structure. Carbon nanotubes (CNTs) were also introduced as photothermal conversion materials to fabricate a photothermal conversion-type double-network aerogel-based eutectic composite PCM (ECPCM). The prepared ECPCM exhibited excellent shape stability, high mechanical strength, and outstanding photothermal conversion performance. Moreover, the ECPCM demonstrated good flame retardancy, low supercooling, and the absence of phase separation issues. Furthermore, the ECPCM demonstrated efficient solar energy storage capacity and outstanding performance in building thermal management. This study offers a new perspective on the advancement of ECPCMs in solar energy storage and thermal management of buildings.

Silk Fabrics Modified with Photothermal Phase Change Microcapsules for Personal Thermal Management.

With the development of technology, personal heat management has become a focus of attention. Phase change fabrics, as intelligent materials, are expected to be widely used in multiple fields, bringing comfortable, intelligent and convenient living experience. In this study, miniature phase change microcapsules (MPCM) with n-octadecane as core and poly(methyl methacrylate) as shell were successfully prepared. Using the in-situ reduction property of polydopamine, gold nanoparticles were deposited on the surface of the microcapsules, which retained the heat storage function and imparted photothermal and antibacterial properties. The MPCM with photothermal conversion function was modified on the surface of silk fabric using aqueous polyurethane after verified by comprehensive material characterisation techniques. Under the near infrared light of 808 nm wavelength and 0.134 W/cm² irradiation intensity, the MPCM@PDA@Au modified silk fabrics showed excellent photothermal conversion performance, which could be increased from 25°C to 60°C in 50s. After the light source was cut off, the fabrics showed good heat release ability, with melting enthalpy and crystallisation enthalpy reaching 41.58 J/g and 43.3 J/g, respectively, which were not changed after repeated cycles. After the light source is cut off, the fabric has good heat release ability, and the enthalpy of melting and crystallisation reaches 41.58 J/g and 43.3 J/g, respectively, and the photothermal efficiency remains unchanged after many cycles of use, which proves that it has excellent durability and stability. The antimicrobial test shows that the fabric has significant antibacterial effect on Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). MPCM@PDA@Au silk fabrics bring new possibilities for the future of personal thermal management and antimicrobial protection in the field of medical health, outdoor sports and other areas of broad application prospects, heralding the birth of a series of innovative applications and solutions.

MXene@polydopamine/oxidized sodium alginate modified collagen composite aerogel as sustainable bio-adsorbent for heavy metal ion adsorption and solar driven water evaporation

The design of an environmentally friendly bio-adsorbent for the removal of heavy metal ions from aqueous media is a sustainable strategy to ensure water safety. Herein, a three-dimensional macroscopic aerogel with photothermal conversion and heavy metal wastewater treatment capability was designed using leather collagen, MXene@polydopamine and oxidized sodium alginate as raw materials, named as MPAC composite aerogel. The applicability of the developed MPAC composite aerogel in water evaporation and heavy metal wastewater treatment was studied. MPAC composite aerogel had good Cr(VI) adsorption capacity. This article focused on the study of adsorption kinetics, isotherms and thermodynamics. The adsorption equilibrium time of MPAC composite aerogel was 60 min, and the equilibrium adsorption capacity of MPAC composite aerogel for Cr(VI) reached 80.73, 100.80 and 112.86 mg/g when the initial Cr(VI) concentration was 30, 70 and 100 mg/L, respectively. The adsorption process of Cr(VI) by MPAC composite aerogel conformed to the two-level dynamics model and the Freundlich adsorption isotherm model, and was a spontaneous endothermic reaction. Additionally, the composite aerogel had good solar-driven water evaporation ability and could enhance the water evaporation rate of Cr(VI) solution. Furthermore, the MPAC composite aerogel had high adsorption performance for Cr(VI) under solar illumination conditions. This new aerogel has the advantages of low cost, environmental friendliness, strong adsorption capacity and photothermal conversion performance and is a promising heavy metal ion adsorbent.

Optimized Photothermal Conversion Ability through Interband Transitions in FeCoNiCrMn High-Entropy-Alloy Nanoparticles.

High-entropy-alloy nanoparticles (HEA-NPs) composed of 3d transition metallic elements have attracted intensive attention in photothermal conversion regions due to their d-d interband transitions (IBTs). However, the effect arising from the unbalanced elemental ratio still needs more focus. In this work, FeCoNiCrMn HEA-NPs with different elemental ratios among Cr and Mn have been employed to clarify the impact of different composed elements on the optical absorption and photothermal conversion performance. It can be recognized that the unbalanced elemental ratio of HEA-NPs can reduce the photothermal performance. Density functional theory calculation demonstrated that d-d IBTs can be changed by the different composed element ratios, resulting in a number of insufficient filling regions around the Fermi level (±4 eV). As a result, the HEA-NPs (FeCoNiCr0.75Mn0.25) with a balanced elemental ratio exhibit the highest surface temperature of 97.6 °C under 1 sun irradiation, and the evaporation rate and energy conversion efficiency could reach 2.13 kg·m-2·h-1 and 93%, respectively, demonstrating effective solar steam generation behavior.

Preparation of photothermal alginate/chitosan derivative/CuS@polydopamine composite fibers and application in desalination

A polyelectrolyte system consisting of sodium alginate (SA) and quaternary ammonium chitosan (QAC) blended with polydopamine-coated copper sulfide particles (CuS@PDA) was chosen to investigate the function of CuS@PDA in the uniform binary blending of anionic and cationic polyelectrolytes in detail. A smart composite fiber SA/QAC/CuS@PDA was prepared via a dry-wet spinning technique. With the addition of CuS@PDA (about 4.3 % in fiber), the as-prepared SA/QAC/CuS@PDA-0.50 fibers (SQCuS@P-0.50 SCFs) showed notably enhanced intensity 359.2 MPa, excellent moisture response, and photothermal conversion performance, with the temperature increasing from 25.9 to 80.7 °C as irradiated under a 980 nm infrared lamp at distance 20 cm away for 120 s. The photothermal performance was maintained after 6 lighting on-and-off cycles. The tensile strength decreased ~23.8 % after 4 cycles, then remained fixed. The diameter increases to ~480 % in wet state but decreases to the original size in dry state for 10 cycles. When the fabric with 90 wt% SQCuS@P-0.50 SCFs was used as a water evaporator, the water evaporation rate and efficiency were 1.68 kg·m−2·h−1 and 102 % under 1 sun irradiation. This work provides a simple and ecofriendly strategy for fabricating photothermal fabrics by designing and preparing composite fibers.

Study on preparation and performance of TiN modified vertically aligned carbon fiber evaporator

The application of solar photothermal conversion is currently one of the main ways to utilize solar energy, therefore it is crucial to find effective materials for photothermal conversion. In this study, carbon fiber evaporators (C-EVAP and R-EVAP) with vertically aligned carbon fiber structure were prepared from ramie and cotton using fiber bundling and carbonization, and then TiN-C-EVAP and TiN-R-EVAP were further obtained by modifying with TiN. The effects of precursor materials and TiN modification on the performance of the evaporators were discussed. The vertically aligned carbon fiber structure facilitates rapid moisture transport similar to the tree stem, enhances the internal reflection of light and improves light absorption. Compared to the short carbon fibers of cotton evaporators, ramie evaporators (R-EVAP and TiN-R-EVAP) with the long vertically aligned carbon fibers and multi-stage hollow structure have better photothermal conversion efficiency. Owing to the wide plasma resonance absorption spectrum and high absorbance of TiN, the TiN modification improves photothermal conversion efficiency of the carbon evaporators. The combination of long vertically aligned carbon fiber structure and TiN modification gives the ramie evaporator efficient photothermal conversion performance. The prepared TiN-R-EVAP has the best photothermal conversion efficiency with an evaporation rate of 1.96 kg·m−2h−1 and an evaporation efficiency of 91.29 % under 1 sunlight. It also has seawater desalination capability and excellent cycling stability, and the typical ion content of the TiN-R-EVAP desalinated condensate can meet the World Health Organization (WHO) standard for usable freshwater salinity. The vertically aligned ramie evaporators similar to the tree stem can be applied to the fields of photothermal conversion and seawater desalination.