Phosphate Groups Research Articles

Emerging potential approaches in alkaline phosphatase (ALP) activatable cancer theranostics.

Alkaline phosphatase (ALP) is known as one of the most crucial members of the phosphatase family and encompasses the enormous ability to hydrolyze the phosphate group in various biomolecules; by this, it regulates several events in the pool of biological medium. Owing to its overexpression in various cancer cells, recently, its potential has evolved as a prominent biomarker in cancer research. In this article, we have underlined the recent advances (2019 onwards) of alkaline phosphatase in the arena of emerging cancer theranostics. Herein, we mainly focused on phosphate-locked molecular systems such as peptides, prodrugs, and aggregation-induced emission (AIE)-based molecules. When these theranostics encounter cancer cell-overexpressed ALP, it results in the hydrolysis of the phosphate group, which leads to the release of highly cytotoxic agents along with turn-on fluorophore/pre-existing fluorophore.

Li3Na7B4P6O26: a new ultraviolet transparent congruently melting non-linear optical crystal.

The exploration of nonlinear optical crystals with ultraviolet (UV) transparent ranges and easy-to-grow large-size crystals is one of the current research interests. Herein, by combining borate and phosphate groups, a novel congruently melting alkali-mixed metal borophosphate, Li3Na7B4P6O26 (LNBPO) with UV transparency was successfully designed and synthesized using a high-temperature flux method. LNBPO crystallizes in the non-centrosymmetric (NCS) and polar orthorhombic space group Pca21 (no. 29), showcasing interesting (B2P3O13)∞ chains along the c axis. Notably, LNBPO has a moderate second harmonic generation (SHG) response (∼0.38 × KDP) and displays a wide transmission ranging from 0.22 to 3.68 μm, as measured by a [001]-oriented crystal wafer. Furthermore, a high-quality single crystal of LNBPO with sizes up to 14 × 14 × 12 mm3 was grown using the top-seeded solution growth method. The refractive indices of LNBPO were determined by applying the minimum deviation angle method. These results show that LNBPO possesses a phase-matching wavelength as short as 483 nm, indicating its potential as a new UV NLO crystal.

Ti3C2@UiO−TCPP Schottky junction photoelectrochemical sensor for detecting alkaline phosphatase through the steric hindrance effect of phosphopeptide

Alkaline phosphatase (ALP) is a major biomarker for clinical diagnosis, but detection methods of ALP are limited in sensitivity and selectivity. In this paper, a novel method for ALP determination is proposed. A photoelectrochemical (PEC) sensor was prepared by growing UiO−tetratopic tetrakis (4-carbox-yphenyl) porphyrin (TCPP) in situ between layered Ti3C2 through a one-pot hydrothermal method. The obtained Schottky heterojunction photoelectric material Ti3C2@UiO−TCPP not only has a large light absorption range but also greatly improves the efficiency of photogenerated electron hole separation and thereby enhances sensitivity for PEC detection. The phosphate group on the phosphorylated polypeptide was utilized to form a Zr–O–P bond with the zirconium ion on UiO-66, and then photocurrent decreases due to the steric hindrance effect of phosphorylated polypeptides, that is, the hindrance of electron transfer between the photoelectric material and a solution. The specific interaction between ALP and phosphorylated polypeptides shears the bond between phosphate and zirconium ion on UiO-66 in the peptides then weakens the hindrance effect and increases the photocurrent, thus realizing ALP detection. The linear range of ALP is 0.03–10,000 U·L−1, and the detection limit is 0.012 U·L−1. The method is highly sensitive and selective, and has been applied in detection of ALP in serum samples.

An ALP enzyme-based electrochemical biosensor coated with signal-amplifying BaTiO3 nanoparticles for the detection of an antiviral drug in human blood serum.

Tenofovir (TFV) is an antiviral drug used to treat the co-infections of HIV/HBV viruses. Accurate monitoring of TFV drug levels is essential for evaluating patient adherence, optimizing dosage, and assessing treatment efficacy. Herein, we propose an innovative electrochemical sensing approach by using the alkaline phosphatase (ALP) enzyme with the support of BaTiO3 nanoparticles. An attractive sensitivity and selectivity of the developed sensor towards TFV detection were achieved. First, the nanoparticles were synthesized by following a single-step sol-gel method and characterized through various analytical techniques, including SEM, EDX, FT-IR, BET, zeta potential, XRD, and UV-vis and Raman spectroscopy. The suggested mechanism demonstrated the formation of a strong bond between TFV and the ALP enzyme, primarily through the phosphate group, resulting in enzyme inhibition. Various parameters like nanoparticle amount, electrode modification time with enzyme and BaTiO3 nanoparticles, and drug incubation time were optimized. The biosensor demonstrated an outstanding limit of detection (LOD) of 0.09 nM and recovery percentages of 98.6-106% in human blood serum, indicating adequate repeatability and selectivity. The proposed biosensor can be converted into a portable device for measuring small sample volumes and observing patients for immediate medical care or personalized therapies. It achieved better sensitivity compared to existing methods, making it suitable for precise drug detection in microdoses.

Study on the occurrence state of main components of phosphogypsum dihydrate and its impurity distribution.

The dihydrate phosphoric acid process is the mainstream technique. However, the phosphogypsum (PG) produced contains high levels of impurities such as phosphorus and fluorine, severely constraining its valorization. In order to elucidate the occurrence patterns of phosphorus and fluorine impurities in PG, this study employed analytical methods including XRF, XRD, AMICS (Automated Mineralogy Integrated with Chemistry System), XPS, and chemical element balance analysis. We investigated the occurrence states of phosphorus, fluorine, silicon, iron, and aluminum elements in PG from wet-process phosphoric acid production, as well as the distribution characteristics of phosphorus and fluorine impurities. Additionally, we utilized Density Functional Theory (DFT) calculations to determine the binding energies of major minerals with water-soluble phosphate and fluoride groups, and analyzed the zeta potentials of gypsum and quartz mineral surfaces. The results indicate that the main mineral phases in PG are gypsum, quartz, potassium silicate minerals, aluminosilicate minerals, and hematite, predominantly occurring in monomineralic forms. Phosphorus impurities primarily exist in calcium silicate and hematite minerals, while fluorine is mainly associated with gypsum and potassium silicate minerals. DFT calculations demonstrate strong binding energies between calcium silicate and hematite minerals with PO4 3-, as well as between gypsum and quartz minerals with F-. The acidic conditions in the separation tank during wet-process phosphoric acid production may contribute to the distinctive distribution characteristics of phosphorus and fluorine impurities in PG.

Research new type of cation-exchange resin for waste water treatment

This article presents the studies obtaining and research new polycondensation type phosphoric cation-exchange resin. The conditions for the phosphorylation of this polymer were selected from the experiments accumulated in relation to the phosphorylation reactions of low- and high-molecular compounds. The resulting polymer had an exchange capacity for a 0.1 N NaOH solution – 5,5-5,6 mEq/g and contained 16,5% phosphorus. Based on the studies carried out, the optimal conditions for the synthesis of the styrene-furfural polymer are assumed to be: the reaction temperature is 90°C, the concentration of the ZnCl2 catalyst is 0.07 mol per mole of furfural, and the molar ratio of styrene to furfural is 1:1. There was studied an interaction of the cation exchanger in Na- and H-forms with solutions of salts of copper sulfate, nickel, cobalt, sodium chloride, calcium and uranyl nitrate. In order to elucidate the mechanism of sorption of the cations of these metals, were taken the IR-spectra of the cation exchanger in the H- and Na- form, saturated with copper ions. The less dissociated phosphoric acid groups, the stronger hydrogen bond forms phosphoryl oxygen with OH-groups. Therefore, it can be expected that as the cation exchanger is saturated with sodium, the maximum of the band corresponding to the phosphorus-oxygen bond vibrations will slightly shift to longer wavelengths as a result of the destruction of the weaker hydrogen bond.

Influence of ion and hydration atmospheres on RNA structure and dynamics: insights from advanced theoretical and computational methods.

RNA, a highly charged biopolymer composed of negatively charged phosphate groups, defies electrostatic repulsion to adopt well-defined, compact structures. Hence, the presence of positively charged metal ions is crucial not only for RNA's charge neutralization, but they also coherently decorate the ion atmosphere of RNA to stabilize its compact fold. This feature article elucidates various modes of close RNA-ion interactions, with a special emphasis on Mg2+ as an outer-sphere and inner-sphere ion. Through examples, we highlight how inner-sphere chelated Mg2+ stabilizes RNA pseudoknots, while outer-sphere ions can also exert long-range electrostatic interactions, inducing groove narrowing, coaxial helical stacking, and RNA ring formation. In addition to investigating the RNA's ion environment, we note that the RNA's hydration environment is relatively underexplored. Our study delves into its profound interplay with the structural dynamics of RNA, employing state-of-the-art atomistic simulation techniques. Through examples, we illustrate how specific ions and water molecules are associated with RNA functions, leveraging atomistic simulations to identify preferential ion binding and hydration sites. However, understanding their impact(s) on the RNA structure remains challenging due to the involvement of large length and long time scales associated with RNA's dynamic nature. Nevertheless, our contributions and recent advances in coarse-grained simulation techniques offer insights into large-scale structural changes dynamically linked to the RNA ion atmosphere. In this connection, we also review how different cutting-edge computational simulation methods provide a microscopic lens into the influence of ions and hydration on RNA structure and dynamics, elucidating distinct ion atmospheric components and specific hydration layers and their individual and collective impacts.

Layered charge separation in surface boron doped copper with phosphate groups boosts the electrochemical uranium extraction from seawater

Electrochemical uranium extraction from seawater is an attractive project for sustainable nuclear industry, whereas the active sites of electrode materials require further promotion on uranyl binding to increase the efficiency and kinetics of uranium extraction. Herein, we construct a strategy of layered charge separation in surface boron-doped copper with surface phosphate ions (B:Cu-PO4) for charge-enhanced uranyl binding and extraction in seawater. The B atoms were demonstrated to decrease the negative charge in surface Cu atoms and increase the negative charge in outer O atoms of PO43- groups, thus enhancing the uranyl binding. In a real seawater experiment, the B:Cu-PO4 extracted 24.9 μg of uranium from 10 L of seawater. Such performance corresponded to a considerable extraction capacity of 2.1 mg/g per day, which outperformed most of the state-of-the-art materials. The successful construction of charge separation in B:Cu-PO4 broadened the material design for uranium extraction from real seawater.

Magnetic composite microspheres with a controlled mesoporous shell for highly efficient DNA extraction and fragment screening.

Rapid extraction and screening of high-purity DNA fragments is an indispensable technology in advanced molecular biology. In this article, mesoporous magnetic composite microspheres (MSP@mTiO2) with tunable pore sizes were successfully fabricated for high-purity DNA extraction and fragment screening. Owing to the strong complexation ability of Ti ions with DNA phosphate groups and the high specific surface area of mesoporous microspheres, the MSP@mTiO2 microspheres possess excellent adsorption performance, where the saturated loading capacity of MSP@mTiO2 with a specific surface area of 122 m2 g-1 is as high as 575 μg mg-1 for a salmon sperm specimen. ITC experiments demonstrated that DNA adsorption on MSP@mTiO2 microspheres is mainly driven by entropy, which gives us more potential ways to regulate the balance of adsorption and desorption. Meanwhile, the mesoporous MSP@mTiO2 microspheres exhibit a much higher extraction efficiency compared with non-porous MSP@TiO2 for whole genome DNA from Arabidopsis thaliana plants. Interestingly, DNA fragments with different lengths could be screened by simply regulating the pore size of MSP@mTiO2 or the concentration of Na3PO4 in the eluent. A small pore size and low phosphate concentration are advantageous for the extraction of short-stranded DNA fragments, and DNA fragments (≤1000 bp) can be efficiently extracted when the mesopore size of MSP@mTiO2 is lower than 7.6 nm. The extraction results from the mesoporous composite microspheres provide new promising insights into the purification and screening of DNA from complex biological samples.

Salt-induced Fmoc-tripeptide supramolecular hydrogels: a combined experimental and computational study of the self-assembly.

Delving into the mechanism behind the molecular interactions at the atomic level of short-sequence peptides plays a key role in the development of nanomaterials with specific structure-property-function relationships from a bottom-up perspective. Due to their poor water solubility, the self-assembly of Fmoc-bearing peptides is usually induced by dissolution in an organic solvent, followed by a dilution step in water, pH changes, and/or a heating-cooling process. Herein, we report a straightforward methodology for the gelation of Fmoc-FFpY (F: phenylalanine; Y: tyrosine; and p: PO42-), a negatively charged tripeptide, in NaCl solution. The electrostatic interactions between Fmoc-FFpY and Na+ ions give rise to different nanofibrillar hydrogels with rheological properties and nanofiber sizes modulated by the NaCl concentration in pure aqueous media. Initiated by the electrostatic interactions between the peptide phosphate groups and the Na+ ions, the peptide self-assembly is stabilized thanks to hydrogen bonds between the peptide backbones and the π-π stacking of aromatic Fmoc and phenyl units. The hydrogels showed self-healing and thermo-responsive properties for potential biomedical applications. Molecular dynamics simulations from systems devoid of prior training not only confirm the aggregation of peptides at a critical salt concentration and the different interactions involved, but also corroborate the secondary structure of the hydrogels at the microsecond timescale. It is worth highlighting the remarkable achievement of reproducing the morphological behavior of the hydrogels using atomistic simulations. To our knowledge, this study is the first to report such a correspondence.

An ALP-responsive, anionic iridium complex for specific recognition of osteosarcoma cells.

Poor cellular permeability greatly hampers the utilization of anionic Ir(III) complexes, though efficiently emissive and remarkably stable, in cell-based diagnosis. To overcome this barrier, we present the development of an alkaline phosphatase (ALP)-responsive, anionic, and aggregation-induced emission (AIE)-active Ir(III) complex (Ir1) for specific recognition of osteosarcoma cells. Containing phosphate moieties, Ir1 exhibits a net -1 charge, enabling charge repulsion from the cell membrane and resulting in low cellular uptake and good biocompatibility in normal osteoblast cells. Upon ALP-mediated hydrolysis of phosphate groups, the resulting dephosphorylated product, Ir2, demonstrates a positive charge and increased lipophilicity, promoting cellular uptake and activating its AIE properties for specific recognition of osteosarcoma cells that express elevated levels of ALP. This study elucidates the role of ALP as an ideal trigger for enhancing the cellular permeability of phosphate ester-containing Ir(III) complexes, thus expanding the potential of anionic Ir(III) complexes for biomedical applications.

The synthesis and adsorption-dispersion properties of PPEGMA-PVPA copolymers in cement paste.

This study reports the synthesis of a novel superplasticizer, poly(poly(ethylene glycol)methacrylate)-poly(vinylphosphonic acid) (PPEGMA-PVPA), containing phosphate moieties via solution radical polymerization. By adjusting the feed ratios of monomers, PPEGMA-PVPA copolymers with different phosphate group densities were obtained, and their chemical structure was characterized via FT-IR, 1H NMR spectroscopy and ICP-OES. The results demonstrated that about 70% of the VPA monomer was polymerized. The thermostability of PPEGMA-PVPA was also determined through DSC and TGA. The adsorption-dispersion performance onto cement pastes was investigated using mini-slump test, TOC and zeta potential analysis. It was demonstrated that the adsorption capacity of PPEGMA-PVPA onto cement paste was about 1.4 times stronger than that of the reference polycarboxylate superplasticizer and exhibited excellent adsorption-dispersion performance.

Antioxidant and Antibacterial potential of Methanol root Extract of Kigelia africana (Sausage tree)

Kigelia africana popularly known as the cucumber or sausage tree that possesses medicinal and traditional uses like anticancer, antiulcer, anti-aging, antioxidant, and anti-malarial activity.This study aimed to investigate GCMS, FTIR, Antioxidant and Antibacterial properties of methanolic root extract of Kigeliaafricana.The antioxidant activity of root extracts of Kigelia was evaluated by 1, 1-diphenyl-2-picrylhydrazyl (DPPH) free radical assay, Reducing power (PR) assay, Ferric Reducing Power assay and Nitric oxide (NO) radical scavenging assay. Ascorbic acid was used as a standard antioxidant. GCMS analysis reveals the presence of 9-Octadecanoic acid (z)-methyl ester while theFTIR spectral analysis identify some functional group such as hydroxyl group, Carboxyl group, methyl group, carbonyl group, amino group, and phosphate group. In vitro antibacterialactivityof the extracts wastestedagainst4bacterialstrains viz; Staphylococccus aureus, Escherichia coli, Pseudomonas aeruginosa, and Salmonella spp.The highest antibacterial activity was found against Staphylococcus aureus then followed by Pseudomonas aeruginosa, Salmonella spp and Escherichia coli. The extract showed much higher scavenging activity against DPPH and with most reducing power against ferric cyanide. This study reveals the potency of the root of K. africana to be used as a good natural source for antioxidant and antibacterial activity.

Characterization of the structure of amorphous disodium etidronate

Disodium ethane-1-hydroxy-1,1-bisphosphonate (disodium etidronate) is a first-generation bisphosphonate that is widely used in treating osteoporosis and Paget’s disease. Pharmaceuticals prepared using disodium etidronate as the drug substance have a crystalline form. Compared with crystalline formulations, amorphous formulations exhibit higher water solubility. However, stable amorphization has not yet been achieved, and clarification of its structural origin is still needed. In this study, high-energy X-ray diffraction and reverse Monte Carlo structural modeling were performed to determine the static structures of amorphous compounds. Na ions have to be placed both within and outside the molecules, such as between phosphate and hydroxyl groups and outside the phosphate groups, respectively, to reproduce the structural factors contributing to amorphization.

One-step synthesis of phospho-rich, silica-enhanced chitosan aerogel for the efficient adsorption of uranium(VI)

In this study, an amorphous silica reinforced, phosphoric-crosslinked chitosan foam (P-CTS@SixOy) was prepared. The introduction of amorphous silica not only increased the affinity of the adsorbent for uranium, but also improved the stability of the material. The number of active sites of P-CTS@SixOy was increased by the introduction of phosphate groups. The material exhibited excellent uranium adsorption performance with the removal capacity and efficiency of 850.5 mg g−1 and 98.1 %, respectively. After regenerations, the morphology of P-CTS@SixOy still maintained, and the uranium adsorption efficiency remained above 90 %, manifesting the excellent cycle performance of P-CTS@SixOy. In the dynamic adsorption experiment, P-CTS@SixOy successfully concentrated the volume of uranium-containing solution, and exhibited excellent uranium adsorption performance. The analysis of kinetics, isotherms, and thermodynamics manifested that the uranium adsorption behavior of P-CTS@SixOy was a spontaneous, endothermic, monolayer chemical adsorption process. X-ray photoelectron spectroscopy, Scanning Electron Microscope, and Fourier Transform Infrared Spectrometer were used to characterized the P-CTS@SixOy before and after adsorption, which demonstrated that the main interaction mechanism between uranium and P-CTS@SixOy was the complexation. These studies indicated the huge application prospect of P-CTS@SixOy in the treatment of large-scale uranium-containing wastewater.

The Strength and Fire Properties of Paper Sheets Made of Phosphorylated Cellulose Fibers.

Phosphorylated cellulose can be an intrinsic flame retardant and a promising alternative for halogenated fire inhibitors. In this study, the mixture of di-ammonium hydrogen phosphate (DAP) and urea (U), containing phosphate and nitrogen groups, was applied to attain fire inhibitor properties. Functional groups of cellulose were grafted with phosphorous by keeping the constant molar ratio of 1/1.2/4.9 between anhydroglucose units of cellulose/DAP/U in different concentrations of bleached kraft pulp. Phosphorus concentrations were determined using the ICP hrOES method, and paper sheets were made using the Rapid Köthen apparatus. The tensile strength of phosphorylated cellulose increased twice compared with unmodified cellulose when the phosphorous concentration increased to 10,000 g/kg. An increase in the tensile index comes from the higher freeness of pulp and cross-linking of the phosphorous group between cellulose fibers. Remarkable fire retardancy effects were achieved in cellulose concentrations above 5 wt%. The raised phosphorous concentration above 10,000 g/kg due to the phosphorylation process caused the formation of a char layer on a cellulose surface and the nonflammable gas emission. That effect was indirectly confirmed by reducing the combustion temperature and HRR by 50 and 45%, respectively. Due to increasing phosphorus concentration in cellulose sheets, cellulose's fire and strength properties increased significantly.

Controlled Surface Functionalization Using Aryldiazonium Salts for the Development of Aptasensing Platforms

It is well known that both the aptamer surface density and surface chemistry can have a strong influence on the analytical performance of aptasensors based on target-induced conformational changes1. In this context, we report here an improved protocol for obtaining aptasensing platforms which allows fine-tuning the DNA aptamer surface coverage. First, glassy carbon substrates were functionalized with ethynylphenyl groups through the electrochemical reduction of silyl-protected ethynylphenyl diazonium tetrafluoroborates followed by deprotection with tetrabutylammonium fluoride2. The successful removal of the protecting groups (triisopropylsilyl-, triphenylsilyl- and tris(biphen-4-yl)silyl-) was confirmed by X-ray photoelectron spectroscopy and cyclic voltammetry in the presence of Fe(CN)6 3-/4- as soluble redox probe. Following “click” post-modification with suitable derivatization reagents, the surface coverage with ethynylphenyl groups was assessed using complementary techniques such as XPS, cyclic voltammetry and chronocoulometry. For example, the F/C surface ratio of substrates derivatized with 1-(2,2,2-trifluoroethoxy)-6-azidohexane provided an indication of the functionalization degree, and the integration of Fc/Fc+ voltammetric peaks for substrates modified with N-(6-azidohexyl)ferrocenecarboxamide allowed a quantitative determination of the surface coverage. Both techniques showed a good correlation between the protective group size and the surface coverage with alkyne groups. Likewise, we observed a similar trend for substrates derivatized with azide-modified oligonucleotides, where the surface packing density was determined based on the chronocoulometric response of Ru(NH3)6 3+, a cationic redox probe which binds with the negatively charged phosphate groups from the oligonucleotide backbone. As proof of concept, we further developed an electrochemical molecular beacon aptasensor employing a ferrocene-labeled quinine aptamer. We demonstrate that the aptamer surface density, and ultimately the analytical performance of molecular beacon aptasensors, can be effectively fine-tuned by employing silyl protecting groups of different sizes.Acknowledgements This work was supported by a grant from the Romanian Ministry of Education and Research, CNCS-UEFISCDI, project number PN-III-P4-ID-PCE-2020-2474, within PNCDI III. References Onaş, A. M., Dascălu, C., Raicopol, M. D. & Pilan, L. Critical Design Factors for Electrochemical Aptasensors Based on Target-Induced Conformational Changes: The Case of Small-Molecule Targets. Biosensors 12, (2022).Leroux, Y. R., Fei, H., Noël, J.-M. M., Roux, C. & Hapiot, P. Efficient covalent modification of a carbon surface: Use of a silyl protecting group to form an active monolayer. J. Am. Chem. Soc. 132, 14039–14041 (2010).

Ultra‐Small ATP‐Decorated Gold Nanoparticles for Targeting Amyloid Fibrils in Neurodegenerative Diseases

AbstractUltrafine Gold nanoparticles (Au NPs) functionalized with various biomolecules constitute an alternative to antibodies as anti‐amyloidogenic agents. However, generating stable ultrafine Au NPs with high surface activity is challenging. Here, the capacity of phosphate groups in biomolecules is used to stabilize Au NPs. The characteristics of Au NPs decorated with adenosine mono‐, di‐, and tri‐phosphate are compared as well as adenosine and peptide nucleic acid‐containing adenosine as controls. Among them, ATP‐Au NPs are found to be superior having small size (2–4 nm) and stability (for several months) when analysed by spectroscopy and electron microscopy. Spectroscopy analysis also revealed that each ATP‐stabilized Au NP is decorated with 7–8 molecules of ATP. ThT binding analysis and TEM imaging showed that the ATP‐Au NPs efficiently prevented amyloid fibril formation in vitro by Aβ‐42, α‐Synuclein as well as by the Glucosylceramide metabolite, and disaggregated their pre‐formed fibrils. NMR analysis revealed the interaction of the ATP‐Au NPs with the amyloid fibrils. The ATP‐Au NPs are safe toward cultured SH‐SY5Y cells and when co‐incubated with α‐Synuclein amyloids inhibited their cytotoxicity and readily enter the cells to inhibit formation of amyloid fibrils within them. The results indicates the pharmacological potentials of ATP decorated Au NPs.

Suitability of Adenosine Derivatives in Improving the Activity and Stability of Cytochrome c under Stress: Insights into the Effect of Phosphate Groups.

It is well known that adenosine and its phosphate derivatives play a crucial role in biological phenomena such as apoptosis and cell signaling and act as the energy currency of the cell. Although their interactions with various proteins and enzymes have been described, the focus of this work is to demonstrate the effect of the phosphate group on the activity and stability of the native heme metalloprotein cytochrome c (Cyt c), which is important from both biological and industrial aspects. In situ and in silico characterizations are used to correlate the relationship between the binding affinity of adenosine and its phosphate groups with unfolding behavior, corresponding peroxidase activities, and stability factors. Interaction of adenosine (ADN), adenosine monophosphate (AMP), adenosine 5'-diphosphate (ADP), and adenosine 5'-triphosphate (ATP) with Cyt c increases peroxidase-like activity by up to 1.8-6.5-fold compared to native Cyt c. This activity is significantly maintained even after multiple stress conditions such as oxidative stress and the presence of a chaotropic agent such as guanidine hydrochloride (GuHCl). With binding affinities on the order of ADN < AMP < ADP < ATP, adenosine derivatives were found to stabilize Cyt c by varying the secondary structural features of the protein. Thus, in addition to being a fundamental study, the current work also proposes a way of stabilizing protein systems to be used for real-time biocatalytic applications.

Phytic acid and ferric chloride compound additives-regulated interfacial polymerization for high-performance nanofiltration membrane

To balance the permeability-selectivity trade-off effect of the polyamide nanofiltration membrane, interfacial polymerization regulation strategy is widely used to optimize the physicochemical structure of the polyamide film. In the present work, the compound additives of phytic acid and ferric chloride were added into the aqueous phase to regulate the interfacial polymerization process. On the one hand, a lot of piperazine monomers will be adsorbed around the phytic acid molecules due to the electrostatic interaction between phosphoric acid groups and amino groups. Meanwhile, the phytic acid molecules and ferric ions can form a complex in the piperazine solution, which results in a low diffusion rate of the other piperazine monomers without adsorbed on the phytic acid and ferric chloride complex due to steric hindrance. The synergistic effect of electrostatic interaction and steric hindrance leads to the optimized nanofiltration membrane with a thinner and looser polyamide structure. The best-performing nanofiltration membrane exhibits an approximately four-fold water permeance (28.4 L m−2 h−1 bar−1) compared with the controlled M0 nanofiltration membrane (6.5 L m−2 h−1 bar−1) without obviously sacrificing the Na2SO4 rejection (96.9 %). This simple interfacial polymerization regulation strategy provides a novel insight for the preparation of high-performance NF membrane.