Wave Phase Research Articles

Directional Phase and Polarization Manipulation Using Janus Metasurfaces.

Janus metasurfaces, exemplifying two-faced 2D metamaterials, have shown unprecedented capabilities in asymmetrically manipulating the wavefront of electromagnetic waves in both forward and backward propagating directions, enabling novel applications in asymmetric information processing, security, and signal multiplexing. However, current Janus metasurfaces only allow for directional phase manipulation, hindering their broader application potential. Here, the study proposes a versatile Janus metasurface platform that can directionally control the phase and polarization of terahertz waves by integrating functionalities of half-wave plates, quarter-wave plates, and metallic gratings within a cascaded metasurface structure. As a proof-of-principle, the study experimentally demonstrates Janus metasurfaces capable of independent and simultaneous control over phase and polarization, showcasing propagation direction-encoded focusing and polarization conversion. Moreover, the directionally focused points are utilized with distinct polarization states for advanced applications in direction- and polarization-sensitive detection and imaging. This unique strategy for simultaneous phase and polarization control with direction-dependent versatility opens new avenues for designing ultra-compact devices with significant implications in imaging, encryption, and data storage.

Comprehensive design of all-optical logic devices utilizing polarization holography

Polarization holography has emerged as a promising method for manipulating the amplitude, phase, and polarization states of light waves. This study proposes what we believe to be a novel design method for various all-optical logic devices, including a complete set of all-optical Boolean logic gates and a polarization-controlled 1 × 4 optical switch, utilizing polarization holography. Through the angle multiplexing technique, specially designed polarization holograms are recorded in polarization-sensitive material, transforming it into all-optical Boolean logic gates and a polarization-controlled 1 × 4 optical switch. The all-optical logic devices developed in this work function as passive diffractive optical elements, enabled by a single piece of polarization-sensitive material, eliminating the need for additional circuit control. This approach offers the advantages of a simple structure, low cost, and instantaneous response. We contend that this advancement will facilitate the expansion of the application domains of polarization holography, particularly enhancing the capabilities of all-optical information processing.

Bond-order density wave phases in dimerized extended Bose-Hubbard models

Bond-order density wave phases in dimerized extended Bose-Hubbard models

Phase and group speeds of airborne surface waves over porous layers and periodically rough hard surfaces.

Sound fields above porous layers or rough acoustically hard boundaries may include airborne surface waves. The surface wave properties depend on the effective surface admittance. Analytical expressions for surface wave speeds are derived from models for the acoustical properties of rigid porous media. Surface wave effects on measurements of level difference spectra over porous asphalt are investigated and predictions of phase, group speeds, and vertical attenuation of the surface waves over externally reacting hard backed layers corresponding to a porous asphalt are compared. Predictions of surface wave characteristics above an identical vertical slit medium are compared with data obtained over arrays of parallel aluminum strips on an acoustically hard surface. Group speeds of surface waves over lattices, parallel regularly spaced strips, and snow obtained by numerical differentiation of the phase speed spectra corresponding to admittance spectra deduced from complex excess attenuation are found to compare well with those estimated from time domain data. An effective admittance, deduced from a boundary element method simulation of the excess attenuation spectrum over regularly spaced ribs so that the frequency of the peak corresponds with that in the measured spectrum, is used to estimate the group speed of the associated surface wave.

Hydrodynamic and kinematic characteristics of high-speed inclined water-exit process in wave environment

Aiming at the process of underwater vehicle crossing the water-air interface based on the computational fluid dynamics(CFD) method, integrating the volume of fluid(VOF) and dynamic fluid body interaction(DFBI) models, a numerical simulation method for the trans-media process in a wave environment was studied. The motion simulation method of underwater vehicle under the action of complex fluid environment was established. The simulation of the water-exit process of the underwater vehicle in a wave environment has been realized. The accuracy verification of the wave-making and trans-media processes has been completed. The hydrodynamic and kinematic characteristics of the vehicle during the water-exit process have been obtained. The influences of the wave phase and velocity on the force and motion characteristics of the underwater vehicle were obtained, which provides technical support for designing the unmanned vehicles.

A New View of Shear Wavespeed and the Lithosphere‐Asthenosphere Boundary in the Southwestern United States

AbstractThe Southwestern United States experiences active deformation, seismicity, and magmatism, remarkable in an intraplate setting. The Basin and Range and Colorado Plateau (CP) are inferred to differ in lithospheric thickness, but modeling geophysical properties of the lithosphere, in particular the depth of the Lithosphere‐Asthenosphere Boundary (LAB), across the entirety of the region, has proved challenging. Here, we introduce a new model of 1‐D depth profiles in shear wavespeed, determined through a probabilistic joint inversion of information from Sp receiver functions and Rayleigh wave phase velocity. From these profiles we quantify the locations and Vs contrast of wavespeed gradients that represent boundaries such as the Moho, the LAB, and intralithospheric discontinuities. We infer a lithosphere that is thinner and lower in Vs in the Basin and Range. In the CP and farther north, the LAB is more gradual, deeper, and intermittently observed. We also observe Mid‐Lithospheric Discontinuities (MLDs) near the boundaries between the CP, Wyoming Craton, and Northern Basin and Range, as well as within the Craton. When both an MLD and LAB are observed, the Vs gradient associated with the LAB is narrower than expected. Finally, we image Positive Velocity Gradients beneath areas of thinner lithosphere, which are consistent with recent global observations that have been attributed to the base of a partially molten zone below the lithosphere. Overall, the picture of the lithosphere‐asthenosphere system that emerges is one of considerable structural complexity with a strong dependency on tectonic regime and geological history.

A gap waveguide-based mechanically reconfigurable phase shifter for high-power Ku-band applications

This paper presents a novel design of a low-loss, reconfigurable broadband phase shifter based on groove gap waveguide (GGW) technology. The proposed phase shifter consists of a folded GGW and three bends with a few pins forming the GGW and one bend attached to a movable plate. This movable plate allows for adjustments to the folded waveguide length, consequently altering the phase of electromagnetic waves. The advantage of GGW technology is that it does not require electrical contact between different parts of a structure. Therefore, it enables the moving parts to slide freely without electromagnetic energy leakage, resulting in improved insertion loss in high-power applications. In addition, in the proposed design, the position of the input and output waveguide ports of the phase shifter remains fixed, which is advantageous from a practical point of view. As shown by measurement and simulation results, there is nearly 37% impedance bandwidth with the highest insertion loss of 0.6 dB, and the developed device has a maximum phase shift of 770° at the center frequency of 13 GHz. The phase shifter can be used for various radar and satellite applications that require phase control, such as beamforming networks and phased array antennas.

Numerical investigation of interaction of two internal solitary waves with different initial wave amplitudes

The present study investigates the collision of two internal solitary waves with different initial amplitudes using a multi-domain boundary element method. It calculates and discusses wave profiles, residence time, and phase shifting. Observations reveal that tail waves are induced during the collision process, with the amplitude of the tail wave increasing as the initial amplitude of the internal solitary wave increases. Residence time, defined in terms of the interaction between waves of different initial amplitudes, decreases as wave amplitudes increase, eventually stabilizing at a constant value. Additionally, phase shifting increases with wave amplitude, with the rate of increase slowing down as the wave profile becomes relatively large.

Crisis management through citizen engagement on Twitter: The case of the covid-19 pandemic in Latin American municipalities

COVID-19 created significant challenges in crisis management worldwide, especially for local governments that needed to communicate with citizens about health risks, policy decisions, and real-time information related to the pandemic. We analyze the evolution of the engagement between citizens and local governments on Twitter during the different phases of the first wave of the pandemic in Latin America, employing social media intelligence techniques to analyze 106,925 tweets from 103 local governments. Our results show enhanced engagement, especially in participation and collaboration, during the phases studied. Moreover, the increased use of social media as a communication channel was associated with mobility restrictions during the pandemic. Our research contributes to a deeper understanding of the role of social media as a communication channel between governments and citizens in the different phases of crisis management.

Identification of Coupled Landau and Anomalous Resonances in Space Plasmas.

Wave-particle resonance, a ubiquitous process in the plasma universe, occurs when resonant particles observe a constant wave phase to enable sustained energy transfer. Here, we present spacecraft observations of simultaneous Landau and anomalous resonances between oblique whistler waves and the same group of protons, which are evidenced, respectively, by phase-space rings in parallel-velocity spectra and phase-bunched distributions in gyrophase spectra. Our results indicate the coupling between Landau and anomalous resonances via the overlapping of the resonance islands.

Heatwave Location Changes in Relation to Rossby Wave Phase Speed

AbstractSurface anticyclones connected to the ridge of an upper‐tropospheric Rossby wave are the main dynamical drivers of mid‐latitude summer heatwaves. It is, however, unclear to what extent an anomalously low zonal phase speed of the wave in the upper troposphere is necessary for persistent temperature extremes at the surface. Here, we use spectral decomposition to separate fast and slow synoptic‐scale waves. A composite analysis of ERA5 reanalysis data reveals that, while in some regions heatwaves become more frequent during episodes of weak or no phase propagation, temperature extremes in other regions are commonly associated with more rapidly eastward propagating Rossby waves. Reflected in the mean heatwave duration as well, this relationship is possibly linked to a longitudinal phase preference of slow and fast waves or a meridional storm track shift. These findings open up new questions about the influence of mid‐latitude dynamics on temperature extremes.

Analysis of two-dimensional planar gratings and metasurfaces in the quasi-static approximation

Currently, composite materials based on metal gratings with a period D much smaller than the wavelength l are widely used. With the use of such materials, it is possible to control the amplitude, phase and polarization of an electromagnetic wave, which opens wide possibilities for the creation of new types of antennas, radio-absorbing coatings, etc. This paper considers gratings of metallic strip or patches on the surface of a thin metal-backed dielectric slab to control the phase of the reflected wave. In the quasi-static approximation, the input impedance of such materials can be calculated using simple analytical formulas. This paper investigates the accuracy of the quasi-static approximation at different angles of incidence of the electromagnetic wave on two-dimensional gratings. Using the equivalent circuits method, analytical expressions for the input impedance of metasurfaces are obtained. The dispersion properties of composite materials “inductive or capacitive grating on the surface of a thin metal-backed dielectric slab” are investigated, and a technique for determining the resonant frequency, which corresponds to the maximum of the input impedance of the metasurface, is presented. The obtained results show that at any angle of incidence, it is possible to evaluate the condition of the quasi-static approximation applicability for two-dimensional gratings and for metasurfaces based on such gratings. If this condition is satisfied, that simple analytical expressions can be used to calculate the input impedance. The use of these expressions allows us to determine the frequency at which the input impedance reaches its maximum. It is established that for inductive and capacitive gratings the impedance boundary condition of M.A. Leontovich is equivalent to the averaged boundary condition of M.I. Kontorovich. It is obtained that for grating in free space, quasi-static approximation corresponds to the M.A. Leontovich impedance condition. The dispersion properties of composite materials “inductive or capacitive grating on a thin metal-backed dielectric slab” are investigated. It is shown that the phase transition of the reflection coefficient through zero occurs at maximum values of the input impedance. Using the considered method of equivalent circuits, the presented results can be easily generalized to any type of multilayer metasurfaces.

Interaction between incident and reflected mechanical waves in the presence of an opposing wind

The interaction between wind and waves largely determines exchanges of mass, momentum, energy, and substances which take place at the air–sea interface. Usually, the parameterization of such interaction considers only the case of progressive waves. However, reflection is practically ubiquitous in the field, especially in coastal areas, and in the lab. Recent experimental studies have extensively treated this subject, showing that even a small amount of wave reflection can significantly modify the free surface elevation and the velocity field on the water side. Nonetheless, a theoretical framework for an exhaustive description of the wave reflection role is still lacking. In this work, an analytical model is developed to emphasize the role of reflection in terms of incident-reflected waves interaction in the 2D momentum equations. A non-null interaction between the incident and the reflected waves is predicted for partially-reflected monochromatic waves, and it is represented by a reflection-induced stress tensor. A phase shift is found among the total wave height, the velocity and the shear stress, with implications on the partition of the wave velocity and stresses. Then, the incident, reflected, and total components of the velocity and of the stresses along the regular wave phase are compared with a set of laboratory experiments, where monochromatic waves in condition of partial reflection are ruffled by an opposing wind. The overlap between experiments and theory is remarkably good, thus validating the entire procedure and assumptions. From the experiments, the fluctuating shear stress and kinetic energy are also extracted for different reflection conditions of the mechanical wave, showing a peak of both quantities near the wave trough (close to the surface). Overall, the experimental analysis gives insights into the velocity, momentum and energy fluxes along the wave phase, based on velocity measurements at one fetch length.

Electronic instability in pressured black phosphorus under strong magnetic field

In this paper, we have systematically studied the electronic instability of pressured black phosphorous (BP) under strong magnetic field. We first present an effective model Hamiltonian for pressured BP near the Lifshitz point. Then we show that when the magnetic field exceeds a critical value, the nodal-line semimetal (NLSM) state of BP with a small band overlap re-enters the semiconductive phase by re-opening a small gap. This results in a narrow-bandgap semiconductor with a partially flat valence band edge. Moreover, we demonstrate that above this critical magnetic field, two possible instabilities, i.e. charge density wave phase and excitonic insulator (EI) phase, are predicted as the ground state for high and low doping concentrations, respectively. By comparing our results with the experiment (Sun et al 2018 Sci. Bull. 63 1539), we suggest that the field-induced instability observed experimentally corresponds to an EI. Furthermore, we propose that the semimetallic BP under pressure with small band overlaps may provide a good platform to study the magneto-exciton insulators. Our findings bring the first insight into the electronic instability of topological NLSM in the quantum limit.

Ultra-wide band gap and wave attenuation mechanism of a novel star-shaped chiral metamaterial

A novel hollow star-shaped chiral metamaterial (SCM) is proposed by incorporating chiral structural properties into the standard hollow star-shaped metamaterial, exhibiting a wide band gap over 1 500 Hz. To broaden the band gap, solid single-phase and two-phase SCMs are designed and simulated, which produce two ultra-wide band gaps (approximately 5 116 Hz and 6 027 Hz, respectively). The main reason for the formation of the ultra-wide band gap is that the rotational vibration of the concave star of two novel SCMs drains the energy of an elastic wave. The impacts of the concave angle of a single-phase SCM and the resonator radius of a two-phase SCM on the band gaps are studied. Decreasing the concave angle leads to an increase in the width of the widest band gap, and the width of the widest band gap increases as the resonator radius of the two-phase SCM increases. Additionally, the study on elastic wave propagation characteristics involves analyzing frequency dispersion surfaces, wave propagation directions, group velocities, and phase velocities. Ultimately, the analysis focuses on the transmission properties of finite periodic structures. The solid single-phase SCM achieves a maximum vibration attenuation over 800, while the width of the band gap is smaller than that of the two-phase SCM. Both metamaterials exhibit high vibration attenuation capabilities, which can be used in wideband vibration reduction to satisfy the requirement of ultra-wide frequencies.

Photo-induced collective charge-density-wave dynamics in bulk 1T-VSe2

We investigated temperature (T) and excitation density dependent ultrafast near-infrared (NIR) transient reflectivity dynamics in the charge density wave (CDW) phases of bulk layered 1T-VSe2 using NIR and visible excitations. The data reveal fingerprints of conventional non-adiabatic CDW collective dynamics with rather fast electronic order parameter dynamics showing sub-picosecond suppression and recovery. The slower T-dependent 100-ps dynamics indicates rather isotropic heat transport dominated by the lattice degrees of freedom.

Fine Crust‐Mantle Structure of the Major Tectonic Boundaries Between the North China Craton and Central Asian Orogenic Belt Revealed From Rayleigh Wave Phase Velocities and Receiver Functions

AbstractThe Tanlu Fault Zone (TLFZ) and Chifeng‐Kaiyuan Fault (CKF) serve as tectonic boundaries between the North China Craton (NCC) and the Central Asian Orogenic Belt (CAOB). Clarifying the refined structure of these tectonic boundaries is crucial for understanding the relationships between the tectonic units and the heterogeneity in the destruction of the NCC. In this study, two linear seismic arrays were deployed across these tectonic boundaries. Based on the phase velocity dispersion and receiver functions extracted from the seismic arrays, the Hamiltonian Monte Carlo algorithm was employed for the joint inversion of the S‐wave velocity (Vs) in the crust and uppermost mantle. The Vs model was then used to correct the time differences in common conversion point (CCP) stacking. The CCP stacking results indicate that the boundary faults TLFZ and CKF are both whole‐crustal faults that separate the NCC and CAOB. The Vs structure showed a significant low‐velocity anomaly in the mantle beneath the NCC, with intense seismic activity within the crust. This suggests that the NCC was affected by the subduction of the Western Pacific, leading to crustal and mantle destruction. In contrast, the CAOB exhibited a clear high‐velocity anomaly with relatively stable crustal structures. We believe that the NCC and CAOB have undergone structural modification and destruction due to the closure of the Paleo‐Asian Ocean and the activities of the TLFZ since the Late Mesozoic. During the Cenozoic, the region east of the TLFZ experienced more significant destruction in the NCC than the other adjacent tectonic units.

Dimensionality-driven power-law gap in the bilayer TaTe2 grown by molecular-beam epitaxy

Reducing dimensionality can induce profound modifications to the physical properties of a system. In two-dimensional TaS2 and TaSe2, the charge-density wave phase accompanies a Mott transition, thus realizing the strongly correlated insulating state. However, this scenario deviates from TaTe2 due to p–d hybridization, resulting in a substantial contribution of Te 5p at the Fermi level. Here, we show that, differently from the Mott insulating phase of its sister compounds, bilayer TaTe2 hosts a power-law (V-shaped) gap at the Fermi level reminiscent of a Coulomb gap. It suggests the possible role of unscreened long-range Coulomb interactions emerging in lowered dimensions, potentially coupled with a disordered short-range charge-density wave. Our findings reveal the importance of long-range interactions sensitive to interlayer screening, providing another venue for the interplay of complex quantum phenomena in two-dimensional materials.

Guided Wave Phased Array Ultrasonic Imaging for Thin Plate Inspection

This study focuses on the application of phased array ultrasonic testing with guided waves for Structural Health Monitoring (SHM) in thin plates. Addressing the limitations of conventional ultrasonic testing efficiently by inspecting thin, long structures. This study employs phased array technology to thin isotropic plates at high frequency(2MHz), thereby elevating imaging and defect detection in structural components. Through the utilization of the full matrix capture (FMC) scanning approach in 3-D finite element (FE) simulations, A0 and S0 modes were generated on steel plates with through-hole geometries. The process involved capturing reflected signals to form an FMC matrix that includes all A-scan signals. Subsequently, the total focusing method (TFM) algorithm was applied to FMC data for the reconstruction of focused images of A0 and S0 modes separately. A key improvement in our approach is integrating a time-domain filtering method into the FMC data. This enhancement addresses the dispersive nature of guided waves, thus improving the accuracy in identifying defect locations and sizes within the images. Our finite element simulations on steel specimens, with varied through-hole locations, revealed the method's potential in accurately imaging defects located deeper within the structure. Additionally, the study expanded to evaluate the efficacy of phased array ultrasonic testing (PAUT) in SHM, particularly in conjunction with guided waves to study the flaw detection sensitivity of the defect through the TFM algorithm on isotropic steel plates up to wavelength(λ)/16. This whole analysis considered crucial factors such as ultrasonic wave mode, frequency, and group velocity for the structure under inspection. This study represents a significant contribution to the field of SHM, introducing a sophisticated, real-time monitoring methodology that promises to enhance structural integrity assessment. Keywords: SHM, PAUT, GW, FMC, TFM FE Simulations, Time Domain Filtering, Ultrasonic Testing.

The Group and Phase Velocity of the Ordinary Wawe in the Ionosphere A Complete Solution and Numerical Analysis

The ionosphere is a conductive and natural plasma layer of the atmosphere that starts from 50 km above the ground and continues up to approximately 1000 km. To neglect the magnetic field effect on the ionosphere, both vertical and horizontal ionosondes are used to detect the electron density of the ionosphere in many parts of the Earth. In this study, in ionosphere plasma; Without any approximation, the phase and group velocities of the ordinari wave, which is independent of the magnetic field in the collisional ionosphere plasma (electron-ion; electron-neutral), were obtained analyt-ically and its seasonal behavior was calculated numerically. According to the results obtained; There is a strong similarity between the change trends in the phase and group velocities of the ordinari wave at local times of 05:00 in the morning and 20:00 in the evening. It can be said that in these time intervals in the E and F regions of the ionosphere, the wave energy is constant and the directions of the phase and group velocities are in the same direction but in opposite directions.