Phase Distribution Research Articles

Out-of-focus holography at the Effelsberg telescope

Context. Out-of-focus (OOF) holography can be used to determine the aperture deformations of radio telescopes that lead to errors in the phase of the complex aperture distribution. In contrast to traditional methods, OOF holography can be performed without a reference antenna, which has a number of practical advantages. Aims. The aim of this work is to develop a standard procedure for OOF holography at the Effelsberg telescope. This includes performing OOF holography observations and the development of dedicated software, the pyoof package, to compute aberrations of the telescope’s optical system. Methods. Based on the OOF holography method developed at the Green Bank telescope, we adapted the approach to the Effelsberg 100 m telescope in order to determine the aberrations of the aperture phase distribution (phase-error maps). Results. The developed OOF holography software is presented as well as the results from observations at Effelsberg. Early results reveal gravitation-related residual deformation not contained in the previously existing aperture and pointing model, and hence we propose changes to the model to counteract aberrations in the telescope’s surface. Conclusions. The OOF holography method (observations and pyoof package) works as expected at the Effelsberg 100 m telescope and is able to validate the good performance of the existing finite element model. Test measurements show that slight improvements of the aperture efficiency and gain elevation dependence are possible but limited in the current configuration.

Controlling vertical phase separation and crystallization via solvent synergy strategy to empower layer-by-layer processed organic solar cells

The novel sequential layer-by-layer (LbL) processed organic solar cells (OSCs) have attracted continuous attention due to their advantages of ideal vertical phase separation, efficient charge transport and collection, and potentiality for large-scale production from laboratory to factory. Herein, a solvent synergy strategy is put forward to control morphology, crystallization and vertical phase distribution of blend films, which means the donor PM6 and acceptor Y6 treated by high/low boiling point solvents are fabricated using LbL solution process, respectively. Based on device with a configuration of ITO/ZnO/PM6:Y6/MoO3/Ag, OSCs derived from the solvent synergy strategy can obtain a remarkable power conversion efficiency (PCE) up to 15.03%, which is comparable to that of the bulk heterojunction devices prepared by conventional one-step solution method. This impressive result provides an insightful understanding of phase segregation and crystalllization in LbL processed OSCs assisted by the solvent synergy strategy. It lays the foundation for fabrication and optimization of high-performance, large-area OSCs in industrial production.

Restraint of Nonradiative Recombination via Modulation of n-Phase Distribution through Interfacial Lithium Salt Insertion for High-Performance Pure-Blue Perovskite LEDs.

Quasi-two-dimensional perovskite has been widely used in blue perovskite light-emitting diodes. However, the performance of these devices is still hampered by random phase distribution, nonradiative recombination, and imbalanced carrier transport. In this work, an effective strategy is proposed to mitigate these limitations by inserting lithium salts at the interfaces between the hole transport layer (HTL) and the perovskite layer. The perovskite film on the inserted Li2CO3 layer exhibits reasonable n-value redistribution, which leads to the repressive nonradiation recombination and enhanced carrier transport. Moreover, the inserted Li2CO3 layer also improves the electrical conductivity of PEDOT:PSS and hinders indium ion diffusion from the PEDOT:PSS layer to the perovskite film, which inhibits exciton quenching and nonradiative recombination loss at the HTL/perovskite interface. Taking advantage of these merits, we have successfully fabricated efficient pure-blue PeLEDs with an external quantum efficiency of 6.2% at 472 nm and a luminance of 726 cd cm-2. The restraint of nonradiative recombination at the interface offers a promising approach for efficient pure-blue PeLEDs.

Editors’ Choice—Visualizing the Impact of the Composite Cathode Microstructure and Porosity on Solid-State Battery Performance

The kinetics of composite cathodes for solid-state batteries (SSBs) relies heavily on their microstructure. Spatial distribution of the different phases, porosity, interface areas, and tortuosity factors are important descriptors that need accurate quantification for models to predict the electrochemistry and mechanics of SSBs. In this study, high-resolution focused ion beam-scanning electron microscopy tomography was used to investigate the microstructure of cathodes composed of a nickel-rich cathode active material (NCM) and a thiophosphate-based inorganic solid electrolyte (ISE). The influence of the ISE particle size on the microstructure of the cathode was visualized by 3D reconstruction and charge transport simulation. By comparison of experimentally determined and simulated conductivities of composite cathodes with different ISE particle sizes, the electrode charge transport kinetics is evaluated. Porosity is shown to have a major influence on the cell kinetics and the evaluation of the active mass of electrochemically active particles reveals a higher fraction of connected NCM particles in electrode composites utilizing smaller ISE particles. The results highlight the importance of homogeneous and optimized microstructures for high performance SSBs, securing fast ion and electron transport.

UCHL3 induces radiation resistance and acquisition of mesenchymal phenotypes by deubiquitinating POLD4 in glioma stem cells

BackgroundThe high degree of intratumoral genomic heterogeneity is a major obstacle for glioblastoma (GBM) tumors, one of the most lethal human malignancies, and is thought to influence conventional therapeutic outcomes negatively. The proneural-to-mesenchymal transition (PMT) of glioma stem cells (GSCs) confers resistance to radiation therapy in glioblastoma patients. POLD4 is associated with cancer progression, while the mechanisms underlying PMT and tumor radiation resistance have remained elusive.MethodExpression and prognosis of the POLD family were analyzed in TCGA, the Chinese Glioma Genome Atlas (CGGA) and GEO datasets. Tumorsphere formation and in vitro limiting dilution assay were performed to investigate the effect of UCHL3-POLD4 on GSC self-renewal. Apoptosis, TUNEL, cell cycle phase distribution, modification of the Single Cell Gel Electrophoresis (Comet), γ-H2AX immunofluorescence, and colony formation assays were conducted to evaluate the influence of UCHL3-POLD4 on GSC in ionizing radiation. Coimmunoprecipitation and GST pull-down assays were performed to identify POLD4 protein interactors. In vivo, intracranial xenograft mouse models were used to investigate the molecular effect of UCHL3, POLD4 or TCID on GCS.ResultWe determined that POLD4 was considerably upregulated in MES-GSCs and was associated with a meagre prognosis. Ubiquitin carboxyl terminal hydrolase L3 (UCHL3), a DUB enzyme in the UCH protease family, is a bona fide deubiquitinase of POLD4 in GSCs. UCHL3 interacted with, depolyubiquitinated, and stabilized POLD4. Both in vitro and in vivo assays indicated that targeted depletion of the UCHL3-POLD4 axis reduced GSC self-renewal and tumorigenic capacity and resistance to IR treatment by impairing homologous recombination (HR) and nonhomologous end joining (NHEJ). Additionally, we proved that the UCHL3 inhibitor TCID induced POLD4 degradation and can significantly enhance the therapeutic effect of IR in a gsc-derived in situ xenograft model.ConclusionThese findings reveal a new signaling axis for GSC PMT regulation and highlight UCHL3-POLD4 as a potential therapeutic target in GBM. TCID, targeted for reducing the deubiquitinase activity of UCHL3, exhibited significant synergy against MES GSCs in combination with radiation.

Numerical Study of Heat Transfer and Fluid Flow Characteristics of a Hydrogen Pulsating Heat Pipe with Medium Filling Ratio

Benefiting from its high thermal conductivity, simple structure, and light weight, the pulsating heat pipe (PHP) can meet the requirements for high efficiency, flexibility, and low cost in industrial heat transfer applications such as aerospace detector cooling and vehicle thermal management. Compared to a PHP working at room temperature, the mechanism of a PHP with hydrogen as the working fluid differs significantly due to the unique thermal properties of hydrogen. In this paper, a two-dimensional model of a hydrogen PHP with a filling ratio of 51% was established to study the flow characteristics and thermal performance. The volume of fluid (VOF) method was used to capture the phase distribution and interface dynamics, and the Lee model was employed to account for phase change. To validate the model, a comparison was conducted between the simulation results and experimental data obtained in our laboratory. The simulation results show that the pressure and temperature errors were within 25% and 5%, respectively. Throughout a pressure oscillation cycle, the occurrence of uniform flow velocity, acceleration, and flow reversal can be attributed to the changes in the vapor–liquid phase distribution resulting from the effect of condensation and evaporation. In addition, when the fluid velocity was greater than 0.6 m/s, dynamic contact angle hysteresis was observed in the condenser. The results contribute to a deeper understanding of the flow and heat transfer mechanism of the hydrogen PHPs, which have not been yet achieved through visualization experiments.

Temporal and Spectral Characteristics of Persistent Emission and Special Bursts of Magnetar SGR J1935+2154 Based on Insight-HXMT

In October 2022, the magnetar SGR J1935+2154 entered the active outburst state. During the episode, the Insight-HXMT satellite carried out a long observation that lasted for 20 days. More than 300 bursts were detected, and a certain amount of persistent radiation signals were also accumulated. This paper mainly introduces the results of persistent radiation profile folding and period search based on Insight-HXMT data. At the same time, the burst phase distribution characteristics, spectral lag results of burst, the spectral characteristics of zero-lag bursts and the time-resolved spectral evolution characteristics of high-flux bursts are reported. We found that there is no significant delay feature during different energy bands for the bursts of SGR J1935+2154. The observed zero-lag burst does not have a unique spectrum. The time-resolved spectrum of the individual burst has consistent spectral types and spectral parameters at different time periods of the burst. We also find that the burst number phase distribution and the burst photon phase distribution have the same tendency to concentrate in specific regions of the persistent emission profile.

Microstructural evolution and investigation of mechanical properties of Al 7055 –Nano Si3N4 composites

In this paper an attempt has been made to develop the aluminium based metal matrix composites. Al7055 were chosen as base material and hard ceramic particulate nano silicon nitride as reinforcement. The composites were fabricated by using bottom pouring stir casting technique by varying weight percentage of Si3N4 in steps of (3 wt%, 6 wt% & 9 wt%) respectively and particle size of 30, 60 and 90nm. Morphological characterization of composites was conducted by using HRFESEM. The SEM result reveals that there is homogeneous distribution between the matrix and reinforcement. EDS mapping for prepared composites were done to identify the presence of alloying elements and phase distribution. XRD analysis is conducted for validation of the structural composition. Mechanical tests like tensile, micro Vickers hardness and impact test were performed on developed composites. The ultimate tensile strength of the composites at 9 wt% and particle size of 90 nm found to be diminishing due to severe agglomeration. The hardness value increases at 9 wt% and particle size of 30 nm. The toughness of the composites increased at 30 nm reinforcement size and 6 wt% as compared to higher weight percentage developed composites. Corrosion test were conducted as per ASTM G31 by weight loss method for different samples by dipping composite samples in 50 g Hcl solution for duration of 6 h and it was found that the corrosion resistance of the composites was higher while increasing the wt% of Si3N4 as compared to base matrix..

Racial disparities in the intervention trials in colon cancer.

e13718 Background: Colorectal cancer (CRC) is the third-leading cancer worldwide and racial minorities bear a disproportionate burden of this disease. Methods: We searched the clinicaltrials.gov database for all the completed clinical trials conducted on adult patients until 2023 in the United States. In intervention trials, we manually abstracted data on the racial distribution of enrollees, phases, tumor histology, intervention type, and year of completion. We divided interventions into chemotherapy, radiotherapy, surgery, immunotherapy, behavioral, diagnostic tests, and others. To quantify the racial disparity, we calculated the enrolment ratio (ER) as the observed ratios of racial participation in the study compared to the prevalence in colorectal cancer per the 2009-2019 Surveillance, Epidemiology and End Results (SEER) database. We also conducted subgroup racial enrollment based on clinical trial and type of intervention. Results: We identified 394 studies, of which 252 studies (64%) had racial distribution published, including 138814 participants. Most studies were phase 2 trials (168), followed by phase 1/2 trials (49) and phase 3 studies (43). The racial breakdown included 88677 White participants (63.9%), 23230 were African Americans (16.7%), 9963 were Asians (7.1%), 4398 were of other races (3.2%), and 12546 were of unknown race (9.0%). The frequency of including racial data was 100% in Phase 1 studies, 56.5% in Phase 2, 58.1% in Phase 3, and only 16% in Phase 4. A total of 185 were immunotherapy trials, out of which 63 studied chemotherapies, radiotherapy and/ or surgery along with immunotherapy. Racial enrolment data was reported in 68.6 %, 58% and 59.3% in immunotherapy, chemotherapy, and radiotherapy interventions respectively. The ERs of whites, blacks, and Asians were 0.8, 1.3, and 0.9, respectively (Table). However, ER in subgroups with specific interventions, such as chemotherapy, immunotherapy, and radiotherapy, were 0.5, 0.4, and 0.6, respectively. Conclusions: African Americans are underrepresented in CRC intervention trials. Equal access and tailored strategies for cultural and linguistic differences are needed for fair participation. [Table: see text]

Broadening of the carbon window and the appearance of core-rim carbides in WC-Fe/Ni cemented carbides

Among several separate challenges, the major one for replacing cobalt in cemented carbides is the difficulty to obtain alternative binder materials with a C-window broad enough to be robustly processed under conventional industrial control on the C content. The C-window is defined as the C content range for which phases that are detrimental to the mechanical properties are avoided. The present paper has two main objectives: first, to show that the processing C-window of Fe-Ni based systems is in fact wider than what thermodynamic equilibrium calculations predict, and that its width can be controlled moderately by tweaking the initial WC grain size and the cooling rate used in the material’s processing. Secondly, in case those detrimental phases are not avoided, this work gives insight on how to make their appearance less detrimental for the mechanical properties. The morphology, volume fraction and particle size distribution of the detrimental phases, specifically η6-carbides at low C contents, are investigated to explore desirable combination of hardness and toughness of alternative binder cemented carbides. During this study it was also discovered that in samples with carbon contents below the low-C limit of the C window a carbide with hexagonal lattice known as κ, not commonly seen in cemented carbides, appeared and formed the core of a core-rim structure together with the more common η6-phase. It is believed that the κ-carbide form due to local high concentrations of tungsten during solid state sintering and that it has an impact on the precipitation characteristics of the η6-phase.

Double-slit holography—a single-shot lensless imaging technique

In this study, we propose a new method for single-shot, high-resolution lensless imaging called double-slit holography. This technique combines the properties of in-line and off-axis holography in one single-shot measurement using the simplest double-slit device: a plate with two apertures. In double-slit holography, a plane wave illuminates the two apertures giving rise to two spherical waves. While diffraction of one spherical wave from a sample positioned behind the first aperture (the object aperture) provides the object wave, the other spherical wave diffracted from the second (reference) aperture provides the reference wave. The resulting interference pattern in the far-field (hologram) combines the properties of an in-line (or Gabor-type) hologram and an off-axis hologram due to the added reference wave from the second aperture. Both the object and reference waves have the same intensity, which ensures high contrast of the hologram. Due to the off-axis scheme, the amplitude and phase distributions of the sample can be directly reconstructed from the hologram, and the twin image can be easily separated. Due to the object wave being the same as in-line holography with a spherical wave, imaging at different magnifications is similarly done by simply adjusting the aperture-to-sample distance. The resolution of the reconstructed object is given by the numerical aperture of the optical setup and the diameter of the reference aperture. It is shown both by theory and simulations that the resolution of the reconstructed object depends on the diameter of the reference wave aperture but does not depend on the diameter of the object aperture. Light optical proof-of-concept experiments are provided. The proposed method can be particularly practical for X-rays, where optical elements such as beam splitters are not available and conventional off-axis holography schemes cannot be realised.

Effect of adaptive control of cooling rate on microstructure and mechanical properties of laser additively manufactured Inconel 718 thin walls

Ni-alloy Inconel 718 (IN718) is finding ever-increasing applications in various industries like aviation and aerospace. IN718 is a precipitation-strengthened alloy which derives its strength mainly from the intermetallic phases, γ” (Ni3Nb) along with the γ’ (Ni3(Al, Ti)) phase which can be precipitated using standard heat treatment schedules. However, the consummation of Nb in Laves phase formation during solidification tends to deteriorate the strength of the material. During laser additive manufacturing (LAM) by directed energy deposition (DED), the cooling rate variation along the build direction causes variations in the microstructure, properties and Laves phase distribution. The study aims to minimize the heterogeneities along the build direction by monitoring and controlling the cooling rate during DED of IN718. The feedback control system involves the use of two pyrometers in tandem with a leading pyrometer measuring the molten pool temperature and a trailing pyrometer measuring the temperature at a distance behind the molten pool. Two sets of thin walls of 120 layers were fabricated with one set being of constant process parameters without feedback control and the other set being of adaptive-controlled process parameters. The adaptive control was aimed at maintaining the cooling rates above a desired limit by changing the process parameters, namely the laser scan speed and the powder feed rate. The Laves phase morphology, which affects the strength of the deposited part deleteriously was finer and more discrete in the adaptive-controlled walls which led to their easier dissolution during heat treatment. This in turn helped in the precipitation of more amount of strengthening phases during heat treatment which led to better mechanical properties. The characterizations of the two sets of walls reflected the superior part quality of the adaptive-controlled wall in terms of homogeneity of microstructure, enhanced microhardness and tensile strength, thereby validating the importance of adaptive control of cooling rate in ensuring better quality in LAM parts.

Al–Si–Cu–Mg Matrix Composites with Graphene: PM‐Based Production, Microstructural, and Mechanical Properties

Few‐layered graphene (FLG)‐reinforced Al‐Si(10 wt%)‐Cu(2 wt%)‐Mg(1 wt%) matrix composites are prepared by the high‐energy mechanical alloying (MA) method, which is a branch of powder metallurgy. Al‐10Si‐2Cu‐1Mg matrix is reinforced with varying amounts of FLG (0, 0.5, 1, 2, and 5 wt%) via MA for different durations (0, 2, 4, and 8 h), and consolidation is conducted by pressureless sintering. Microstructural, mechanical, and tribological characterizations are applied to nonmechanically alloyed (non‐MAed) and mechanically alloyed (MAed) powder and bulk composites comparatively. The bulk composites produced via the MA‐containing processing route illustrate more homogeneous phase distributions and higher densification rates. The FLG/AlSiCuMg composites exhibit enhanced materials properties compared to their unreinforced counterparts. The addition of 1 and 2 wt% FLG to the Al‐10Si‐2Cu‐1Mg alloy, respectively, improved the mechanical properties in terms of microhardness (155 and 162 HV), compression strength (441 and 412 MPa), and wear rate (11.5 × 10−4 and 9.2 × 10−4 mm3 N−1 m). Therefore, the experimental results show that graphene ensures a reinforcing effect on the Al matrix, at least provided by some of the ceramic particles.

All-optical complex field imaging using diffractive processors.

Complex field imaging, which captures both the amplitude and phase information of input optical fields or objects, can offer rich structural insights into samples, such as their absorption and refractive index distributions. However, conventional image sensors are intensity-based and inherently lack the capability to directly measure the phase distribution of a field. This limitation can be overcome using interferometric or holographic methods, often supplemented by iterative phase retrieval algorithms, leading to a considerable increase in hardware complexity and computational demand. Here, we present a complex field imager design that enables snapshot imaging of both the amplitude and quantitative phase information of input fields using an intensity-based sensor array without any digital processing. Our design utilizes successive deep learning-optimized diffractive surfaces that are structured to collectively modulate the input complex field, forming two independent imaging channels that perform amplitude-to-amplitude and phase-to-intensity transformations between the input and output planes within a compact optical design, axially spanning ~100 wavelengths. The intensity distributions of the output fields at these two channels on the sensor plane directly correspond to the amplitude and quantitative phase profiles of the input complex field, eliminating the need for any digital image reconstruction algorithms. We experimentally validated the efficacy of our complex field diffractive imager designs through 3D-printed prototypes operating at the terahertz spectrum, with the output amplitude and phase channel images closely aligning with our numerical simulations. We envision that this complex field imager will have various applications in security, biomedical imaging, sensing and material science, among others.

Transparent high entropy garnet ceramics by SPS

High entropy or multi-principles component oxides as a new class of materials have been widely investigated for various applications due to their unique properties and multi-functionalities in recent years. In this study, a high entropy transparent ceramics ((Gd0.2Tb0.2Y0.2Lu0.2Yb0.2)3Al5O12) has been fabricated by spark plasma sintering (SPS) using co-precipitation synthesized powders. The powder preparation process was studied by TAG-DSC and FTIR. The phase structure, morphology, and element distribution of the obtained powder and ceramic samples are explored by XRD, SEM, and EDS mapping. It shows that the high entropy oxide (HEO) ceramic powder has a pure garnet phase, nanoparticle size, and homogenous elements distribution. The sintered ceramic exhibits the highest in-line transmittance in the visible and IR range of approximately 52 % at 700 nm and 74 % at 3.6 μm, respectively. In addition, characteristic optical properties of the final ceramics were demonstrated by photoluminescence spectroscopy. This work indicated that high-entropy garnet transparent ceramics with multi-wavelength emissions will provide more possibilities for multifunctional optical applications in the future.

Micromechanical and microstructure evolution of leaded (SnPb) and lead-free (SAC305 and SnCu) mixed solder joints during isothermal aging

This paper studies how isothermal aging affects the micromechanical and structural properties of mixed solder joints made of 60Sn-40Pb (SnPb) with Sn-3.0Ag-0.5Cu (SAC305) and SnPb with Sn-0.7Cu (SnCu). The nanoindentation test was done to measure the micromechanical properties of SnPb/SAC305 and SnPb/SnCu mixed solder joints. These properties are hardness, reduced modulus, and stress exponent. Scanning electron microscopy (SEM) was used to look at the microstructure of a cross-section of mixed solder joints. The micrographs that were taken were then examined with open-source image processing software called ImageJ. It was found that the rate and distribution of intermetallic compound (IMC) formation and the reduction of Sn-rich phase grain size affect how the hardness and stress exponent values of mixed solder joints change after 1000 h of high temperature storage (HTS). ImageJ analysis shows that the Pb-rich phase particle count and distribution can be used to figure out how mixed solder joints respond to indentation creep and how that relates to isothermal aging. Using ImageJ, it’s clear that the indentation creep behavior of the GBS mechanism of an as soldered SnPb/SnCu mixed solder joint is caused by the highest number and size of Pb-rich phase particles that are not well distributed across the dendritic area of Sn-rich phase grain boundaries.

Characterization and biological evaluation of 3D printed composite ink consisting of collagen, hyaluronic acid and calcium phosphate for bone regeneration

In large bone defects the self-healing capacity is insufficient, and the current standard treatment, autologous bone grafting, has severe disadvantages such as limited availability and donor site morbidity. Alternatively, clinically available bone graft substitutes lack spatial control over scaffold architecture to anatomically match complicated bone defects. Therefore, the aim in this study was to develop a 3D printable composite biomaterial-ink to promote healing of large bone defects. The composite biomaterial-ink consisted of an organic biopolymer matrix with tyramine modified hyaluronic acid (THA) and collagen type I (Col) mixed with osteoinductive calcium phosphate particles (CaP). The biopolymer was combined with 0, 10, 20 and 30 % of either 45–63 µm or 45–106 µm CaP. µCT imaging showed a homogeneous distribution of CaP in the THA-Col hydrogel and all composites were 3D printable. In vitro cell activity assays revealed no indirect cytotoxicity using L929 cells and high cell cytocompatibility using human mesenchymal stromal cells (hMSCs). Additionally, all composites supported in vitro osteogenic differentiation of hMSCs. This study highlights the development of a 3D printable composite biomaterial-ink using CaP and THA-Col hydrogel that holds significant potential to be used as patient-specific bone graft substitute for the regeneration of large bone defects. Statement of significanceThis paper introduces a 3D printable composite biomaterial-ink made of osteoinductive calcium phosphate particles combined with matrix biopolymers collagen and hyaluronic acid, which was chemically modified to introduce shear thinning and shape fixation properties for 3D printing. The chemical modification only involves a small percentage of functional groups, preserving hyaluronan's biological properties. We demonstrated printability, the homogeneous distribution of the mineral phase, cytocompatibility and that the composites support osteogenesis of primary human mesenchymal stromal cells from multiple donors. The printability of the composite biomaterial-ink allows the creation of patient-specific implants with controlled geometry on porosity. This study contributes towards engineering personalized implants for replacing autologous bone grafting in all clinical situations where the bone self-healing capacity is insufficient.

Controlled phase distribution of quasi-2D perovskite enables improved electroluminescence

Quasi-two-dimensional (quasi-2D) perovskites are increasingly explored for integration into light-emitting diodes (LEDs) as light-emissive layers. However, the quasi-2D perovskite films likely exhibit non-uniform dimensional phase distribution and irregular internal crystal structures. These characteristics are known to contribute to undesirable effects, including non-radiative recombination losses and radiative recombination in perovskites of various dimensions, impeding the realization of efficient electroluminescence and high color purity in LEDs. In this study, we present an investigation on the correlation between the dimensional distribution of quasi-2D perovskites and charge carrier behavior by modulating anti-solvent dripping during the film fabrication processes. We provide a comprehensive analysis of the impact of controlled dimensional distribution on charge injection and recombination processes associated with the performance of quasi-2D perovskite LEDs. Our work emphasizes the crucial role played by controlled dimensionality in quasi-2D perovskites in realizing efficient and stable perovskite-based LEDs.

Efficient and robust 3D reconstruction: Absolute phase extraction algorithm based on three gray images

The structured light three-dimensional (3D) measurement technology based on optical metrics has gained increasing applications, and there is a growing demand for capturing transient trajectory changes in dynamic scenes. Conventional temporal phase unwrapping (TPU) approaches often require multi-frequency fringe patterns for application. However, the inevitable conflict arises between the number of projected fringe patterns and the measurement speed. This paper proposes a highly accurate and robust 3D measurement method using only 3-step phase-shifting fringe patterns. To precisely reconstruct the 3D shape using the fewest fringe patterns, it is essential to extract as much information as possible from the available patterns. Therefore, we calculate the wrapped phase distribution using 3-step phase-shifting fringe patterns to ensure accuracy. Simultaneously, the trapezoidal phase-shifting method is employed to calculate the intensity ratio distribution. Through the proposed region-based indexing method, the intensity ratio map is transformed into an unwrapped phase map. Additionally, a novel self-correction method is introduced to correct the non-linear errors in the unwrapped phase map, which is then utilized for the calculation of the fringe order required for phase unwrapping. This high-speed measurement method utilizes only 3-step phase-shifting fringe patterns while retaining the advantages of TPU, meeting the requirements of high-speed and full-field measurements. Experimental results on both static and dynamic scenes validate the effectiveness and versatility of the proposed method, demonstrating its flexibility and simplicity in application. In our 3D measurement system, the method achieves 3D reconstruction of the dynamic object's trajectory at a measurement speed of 107 frames per second.

Differential effects of Fe, Ti and Fe + Ti addition on the discontinuous precipitation and properties of cu-Ni-Sn alloys

Controlling discontinuous precipitation is crucial for improving the microstructure and mechanical properties of Cu-Ni-Sn alloys. Through the utilization of various characterization techniques such as transmission electron microscopy, scanning electron microscopy, optical microscopy, and mechanical testing, we have successfully demonstrated that the introduction of either Ti or a combination of Fe and Ti elements effectively inhibits the formation of discontinuous precipitation. Notably, the combined addition of Fe and Ti elements showcases superior suppression of the discontinuous precipitation structure. Consequently, we have developed a novel alloy, namely Cu-15Ni-7.5Sn-0.5Fe-0.5Ti, which exhibits remarkable resistance to over-aging. Our analysis indicates that the mechanism of inhibiting discontinuous precipitation is multifaceted. The main effect is believed to be the reduction in nucleation sites and the pinning effect of the D024-Ni3Ti phase on grain boundaries, resulting in a significant decrease in the nucleation rate and growth of the DP reaction. The secondary impact may be due to the distribution of D024-Ni3Ti phase at grain boundaries, which leads to a decrease in grain boundary energy. Meanwhile, the formation of D019-Ni3Sn phase reduces the chemical driving force required for DP growth.