Phantom Samples Research Articles

Broadband, monochromatic and quasi-monochromatic x-ray propagation in multi-Z media for imaging and diagnostics

With the advent of monochromatic and quasi-monochromatic x-ray sources, we explore their potential with computational and experimental studies on propagation through a combination of low and high-Z (atomic number) media for applications to imaging and detection. The multi-purpose code GEANT4 and a new code PHOTX are employed in numerical simulations, and a variety of x-ray sources are considered: conventional broadband devices with well-known spectra, quasi-monochromatic laser driven sources, and monochromatic synchrotron x-rays. Phantom samples consisting of layers of low-Z and high-Z material are utilized, with atomic-molecular species ranging from H2O to gold. Differential and total attenuation of x-ray fluxes from the different x-ray sources are illustrated through simulated x-ray images. Main conclusions of this study are: I. It is shown that a 65 keV Gaussian quasi-monochromatic source is capable of better contrast with less radiation exposure than a common 120 kV broadband simulator. II. A quantitative measure is defined and computed as a metric to compare the efficacy of any two x-ray sources, as a function of concentration of high-Z moieties in predominantly low-Z environment and depth of penetration. III. Characteristic spectral features of , fluorescent emission and Compton scattering indicate pathways for accelerating x-ray photoexcitation and absorption; in particular, we model the tungsten at 59 keV alongside experimental measurements at the European synchrotron research facility to search for the signature of induced resonance fluorescence. The present study should contribute to the understanding of diagnostic potential of new x-ray sources under development, as well as the underlying fundamental physical processes and features for biomedical applications.

Differential Mueller matrix polarimetry technique for non-invasive measurement of glucose concentration on human fingertip.

A differential Mueller matrix polarimetry technique is proposed for obtaining non-invasive (NI) measurements of the glucose concentration on the human fingertip. The feasibility of the proposed method is demonstrated by detecting the optical rotation angle and depolarization index of tissue phantom samples containing de-ionized water (DI), glucose solutions with concentrations ranging from 0~500 mg/dL and 2% lipofundin. The results show that the extracted optical rotation angle increases linearly with an increasing glucose concentration, while the depolarization index decreases. The practical applicability of the proposed method is demonstrated by measuring the optical rotation angle and depolarization index properties of the human fingertips of healthy volunteers.

In-vivo digital wavefront sensing using swept source OCT.

Sub-aperture based digital adaptive optics is demonstrated in a fiber based point scanning optical coherence tomography system using a 1060 nm swept source laser. To detect optical aberrations in-vivo, a small lateral field of view of ~[Formula: see text] is scanned on the sample at a high volume rate of 17 Hz (~1.3 kHz B-scan rate) to avoid any significant lateral and axial motion of the sample, and is used as a "guide star" for the sub-aperture based DAO. The proof of principle is demonstrated using a micro-beads phantom sample, wherein a significant root mean square wavefront error (RMS WFE) of 1.48 waves (> 1[Formula: see text]) is detected. In-vivo aberration measurement with a RMS WFE of 0.33 waves, which is ~5 times higher than the Marechal's criterion of [Formula: see text] waves for the diffraction limited performance, is shown for a human retinal OCT. Attempt has been made to validate the experimental results with the conventional Shack-Hartmann wavefront sensor within reasonable limitations.

Characterisation of speckle-based X-ray phase-contrast imaging

We present a study on the influence of different scan and reconstruction parameters on the image quality of the differential phase signals obtained from speckle-based X-ray phase-contrast imaging measurements in single-shot as well as 2D and 1D speckle-stepping modes. In particular, the effects of the analysis window size and the number of diffuser steps on the spatial resolution and signal sensitivity of images of a phantom sample are investigated and discussed. It is shown that the trade-off between spatial resolution, scan time and simplicity of the setup has to carefully be addressed for each specific experiment.

Coherent optical adaptive technique improves the spatial resolution of STED microscopy in thick samples.

Stimulated emission depletion microscopy (STED) is one of far-field optical microscopy techniques that can provide sub-diffraction spatial resolution. The spatial resolution of the STED microscopy is determined by the specially engineered beam profile of the depletion beam and its power. However, the beam profile of the depletion beam may be distorted due to aberrations of optical systems and inhomogeneity of specimens' optical properties, resulting in a compromised spatial resolution. The situation gets deteriorated when thick samples are imaged. In the worst case, the sever distortion of the depletion beam profile may cause complete loss of the super resolution effect no matter how much depletion power is applied to specimens. Previously several adaptive optics approaches have been explored to compensate aberrations of systems and specimens. However, it is hard to correct the complicated high-order optical aberrations of specimens. In this report, we demonstrate that the complicated distorted wavefront from a thick phantom sample can be measured by using the coherent optical adaptive technique (COAT). The full correction can effectively maintain and improve the spatial resolution in imaging thick samples.

Visualizing polymeric bioresorbable scaffolds with three-dimensional image reconstruction using contrast-enhanced micro-computed tomography

There are no previous studies showing how to visualize polymeric bioresorbable scaffolds (BRSs) by micro-computed tomography (mCT). There are no previous studies showing how to visualize polymeric bioresorbable scaffolds (BRSs) by micro-computed tomography (mCT). This study aimed to explore the feasibility of detecting polymeric BRS with 3-dimensional reconstruction of BRS images by contrast-enhanced mCT and to determine the optimal imaging settings. BRSs, made of poly-l-lactic acid (PLLA), were implanted in coronary bifurcation models. Five treatments were conducted to examine an optimal condition for imaging BRSs: Baseline treatment, samples were filled with normal saline and scanned with mCT immediately; Treatment-1, -2, -3 and -4, samples were filled with contrast medium and scanned with mCT immediately and 1, 2 and 3 h thereafter, corresponding to soaking time of contrast medium of 0, 1, 2 and 3 h. Compared to Baseline, mCT scanning completely discriminate the scaffold struts from the vascular lumen immediately after filling the samples with contrast agent but not from the vascular wall until the contrast agent soaking time was more than 2 h (Treatment-3 and -4). By setting 10–15 HU as a cut-point of CT values, the scaffold strut detectable rate at Baseline and Teatment-1, -2, -3 and -4 were 1.23 ± 0.31%, 1.65 ± 0.26%, 58.14 ± 12.84%, 97.97 ± 1.43% and 98.90 ± 0.38%, respectively (Treatment-3 vs. Treatment-2, p < 0.01); meanwhile, the success rate of 3D BRS reconstruction with high quality images at Baseline and Teatment-1, -2, -3 and -4 were 1.23%, 1.65%, 58.14%, 97.97% and 98.90%, respectively (Treatment-3 vs. Treatment-2, p < 0.01). In conclusions, reconstruction of 3D BRS images is technically feasible by contrast-enhanced mCT and soaking time of contrast agent for more than 2 h is necessary for complete separation of scaffold struts from the surrounding structures in the phantom samples.

The impact of spin coupling signal loss on fat content characterization in multi-echo acquisitions with different echo spacing

PurposeThis study aimed to assess the effect of echo spacing in transverse magnetization (T2) signal decay of gel and fat (oil) samples. Additionally, we assess the feasibility of using spin coupling as a determinant of fat content. MethodsPhantoms of known T2 values, as well as vegetable oil phantoms, were scanned at 1.5T scanner with a multi echo FSE sequence of variable echo spacing above and below the empirical threshold of 20ms for echo train signal modulation (6.7, 13.6, 26.8, and 40ms). T2 values were calculated from monoexponential fitting of the data. Relative signal loss between the four acquisitions of different echo spacing was calculated. ResultsAgreement in the T2 values of water gel phantom was observed in all acquisitions as opposed to fat phantom (oil) samples. Relative differences in signal intensity between two successive sequences of different echo spacing on composite fat/water regions of interest was found to be linearly correlated to fat fraction of the ROI. ConclusionThe sample specific degree of signal loss that was observed between different fat samples (vegetable oils) can be attributed to the composition of each sample in J coupled fat components. Hence, spin coupling may be used as a determinant of fat content.

Surgeon assessment versus laboratory measurement: brain tissue mechanics quantified by expert opinion

Transcranial ultrasound (tUS) is a plausible means of measuring motion of the brain due to traumatic force or structural abnormalities. However, limited data in the literature on the mechanical properties of human brain tissue make it practically impossible to develop a mechanically realistic ultrasound phantom that can mimic the brain under these conditions. The present study aimed to determine, by indirect qualitative assessment, the stiffness of in-vivo brain tissue. Six surgeon examiners under blinded conditions physically examined 16 gelatin-based tissue phantoms (0.020-0.095 g/mL) to determine which sample best matched the stiffness of brain tissue in-vivo. Ten cylindrical phantom samples, acoustically matched to human brain tissue, were prepared based on the examiners’ responses (0.030±0.008 g/mL), and stress-strain behavior was characterized under compression up to 50% strain. The average compressive stress at 50% strain was 10.3±1.4 kPa. These results correlate well with those previously reported in the literature, and add a practical measure of brain stiffness to the paucity of information available on human brain tissue mechanics. Furthermore, it is potentially an initial step in developing mechanically realistic models of structural disorders of the brain and traumatic brain injury to evaluate theories on the brain’s mechanical behavior under these circumstances.

Quantifying tissue viscoelasticity using optical coherence elastography and the Rayleigh wave model.

This study demonstrates the feasibility of using the Rayleigh wave model (RWM) in combination with optical coherence elastography (OCE) technique to assess the viscoelasticity of soft tissues. Dispersion curves calculated from the spectral decomposition of OCE-measured air-pulse induced elastic waves were used to quantify the viscoelasticity of samples using the RWM. Validation studies were first conducted on 10% gelatin phantoms with different concentrations of oil. The results showed that the oil increased the viscosity of the gelatin phantom samples. This method was then used to quantify the viscoelasticity of chicken liver. The Young’s modulus of the chicken liver tissues was estimated as E=2.04±0.88??kPa with a shear viscosity ?=1.20±0.13??Pa?s. The analytical solution of the RWM correlated very well with the OCE-measured phased velocities (R2=0.96±0.04). The results show that the combination of the RWM and OCE is a promising method for noninvasively quantifying the biomechanical properties of soft tissues and may be a useful tool for detecting disease.

Quantification of breast lesion compositions using low-dose spectral mammography: A feasibility study.

The positive predictive power for malignancy can potentially be improved, if the chemical compositions of suspicious breast lesions can be reliably measured in screening mammography. The purpose of this study is to investigate the feasibility of quantifying breast lesion composition, in terms of water and lipid contents, with spectral mammography. Phantom and tissue samples were imaged with a spectral mammography system based on silicon-strip photon-counting detectors. Dual-energy calibration was performed for material decomposition, using plastic water and adipose-equivalent phantoms as the basis materials. The step wedge calibration phantom consisted of 20 calibration configurations, which ranged from 2 to 8 cm in thickness and from 0% to 100% in plastic water density. A nonlinear rational fitting function was used in dual-energy calibration of the imaging system. Breast lesion phantoms, made from various combinations of plastic water and adipose-equivalent disks, were embedded in a breast mammography phantom with a heterogeneous background pattern. Lesion phantoms with water densities ranging from 0% to 100% were placed at different locations of the heterogeneous background phantom. The water density in the lesion phantoms was measured using dual-energy material decomposition. The thickness and density of the background phantom were varied to test the accuracy of the decomposition technique in different configurations. In addition, an in vitro study was also performed using mixtures of lean and fat bovine tissue of 25%, 50%, and 80% lean weight percentages as the background. Lesions were simulated by using breast lesion phantoms, as well as small bovine tissue samples, composed of carefully weighed lean and fat bovine tissues. The water densities in tissue samples were measured using spectral mammography and compared to measurement using chemical decomposition of the tissue. The thickness of measured and known water contents was compared for various lesion configurations. There was a good linear correlation between the measured and the known values. The root-mean-square errors in water thickness measurements were 0.3 and 0.2 mm for the plastic phantom and bovine tissue backgrounds, respectively. The results indicate that spectral mammography can be used to accurately characterize breast lesion composition in terms of their equivalent water and lipid contents.

Chip based common-path optical coherence tomography system with an on-chip microlens and multi-reference suppression algorithm.

We demonstrate an integrated optical probe including an on-chip microlens for a common-path swept-source optical coherence tomography system. This common-path design uses the end facet of the silicon oxynitride waveguide as the reference plane, thus eliminating the need of a space-consuming and dispersive on-chip loop reference arm, thereby obviating the need for dispersion compensation. The on-chip micro-ball lens eliminates the need of external optical elements for coupling the light between the chip and the sample. The use of this lens leads to a signal enhancement up to 37 dB compared to the chip without a lens. The light source, the common-path arm and the detector are connected by a symmetric Y junction having a wavelength independent splitting ratio (50/50) over a much larger bandwidth than can be obtained with a directional coupler. The signal-to-noise ratio of the system was measured to be 71 dB with 2.6 mW of power on a mirror sample at a distance of 0.3 mm from the waveguide end facet. Cross-sectional OCT images of a layered optical phantom sample are demonstrated with our system. A method, based on an extended Fourier-domain OCT model, for suppressing ghost images caused by additional parasitic reference planes is experimentally demonstrated.

Automated interferometric synthetic aperture microscopy and computational adaptive optics for improved optical coherence tomography.

In this paper, we introduce an algorithm framework for the automation of interferometric synthetic aperture microscopy (ISAM). Under this framework, common processing steps such as dispersion correction, Fourier domain resampling, and computational adaptive optics aberration correction are carried out as metrics-assisted parameter search problems. We further present the results of this algorithm applied to phantom and biological tissue samples and compare with manually adjusted results. With the automated algorithm, near-optimal ISAM reconstruction can be achieved without manual adjustment. At the same time, the technical barrier for the nonexpert using ISAM imaging is also significantly lowered.

Real-Time Visualization of Tissue Surface Biochemical Features Derived From Fluorescence Lifetime Measurements

Fiber based fluorescence lifetime imaging has shown great potential for intraoperative diagnosis and guidance of surgical procedures. Here we describe a novel method addressing a significant challenge for the practical implementation of this technique, i.e., the real-time display of the quantified biochemical or functional tissue properties superimposed on the interrogated area. Specifically, an aiming beam (450 nm) generated by a continuous-wave laser beam was merged with the pulsed fluorescence excitation light in a single delivery/collection fiber and then imaged and segmented using a color-based algorithm. We demonstrate that this approach enables continuous delineation of the interrogated location and dynamic augmentation of the acquired frames with the corresponding fluorescence decay parameters. The method was evaluated on a fluorescence phantom and fresh tissue samples. Current results demonstrate that 34 frames per second can be achieved for augmenting videos of 640 × 512 pixels resolution. Also we show that the spatial resolution of the fluorescence lifetime map depends on the tissue optical properties, the scanning speed, and the frame rate. The dice similarity coefficient between the fluorescence phantom and the reconstructed maps was estimated to be as high as 93%. The reported method could become a valuable tool for augmenting the surgeon's field of view with diagnostic information derived from the analysis of fluorescence lifetime data in real-time using handheld, automated, or endoscopic scanning systems. Current method provides also a means for maintaining the tissue light exposure within safety limits. This study provides a framework for using an aiming beam with other point spectroscopy applications.

In-vitro Measurement of Glucose Concentration in Human Blood Plasma Mixed Intralipid Phantom Samples by Using Modulated Ultrasound and Infrared Light

Non-invasive blood glucose measurement is one of most innovative domain in Biomedical Engineering. Multiple methodologies have-been introduced over last few decades to fulfil the clinical requirement for non-invasive glucose measurement in human beings, however, without a successful breakthrough. This research article uses modulated ultrasound with infrared light-based technique to study glucose-induced variations in human blood plasma mixed Intralipid TM phantom samples using infrared light of 940 nm and 40 kHz central frequency based ultrasonic transmitter unit. The test uses blood samples of 30 study subjects during oral glucose tolerance test and fasting, postprandial and random stages based blood glucose tests respectively. The result as obtained from oral glucose tolerance tests and fasting, postprandial and random stages blood Original Research Article

Thermochromic Phantom and Measurement Protocol for Qualitative Analysis of Ultrasound Physiotherapy Systems

Thermochromic test bodies are promising tools for qualitatively evaluating the acoustic output of ultrasound physiotherapy systems. Here, a novel phantom, made of silicone mixed with thermochromic powder material, was developed. Additionally, a procedure was developed to evaluate the stability and homogeneity of the phantom in a metrologic and statistical base. Twelve phantoms were divided into three groups. Each group was insonated by a different transducer. An effective intensity of 1.0 W/cm2 was applied to each phantom; two operators performed the procedure three times in all phantoms. The heated area was measured after image processing. No statistical difference was observed in the heated areas for different samples or in the results for different operators. The heated areas obtained using each transducer were statistically different, indicating that the thermochromic phantom samples had sufficient sensitivity to represent the heated areas of different ultrasonic transducers. Combined with the evaluation procedure, the phantom provides an approach not previously described in the literature. The proposed approach can be used to quickly assess changes in ultrasonic beam cross-sectional shape during the lifetime of ultrasound physiotherapy systems.

Minimum detection time (MDT) for elemental EDXRF images

When obtaining a chemical element image through energy dispersive X‐ray fluorescence (EDXRF) scanning of a specific sample, it is important to determine the minimum detection time (MDT) required per dot (pixel) and per element in order to identify the minority and the trace elements present in the sample. Starting from the statistical criteria of limit of detection, quantitative estimations can be made regarding the concentration of elements present in the samples, determining the MDT which fits to the limit of detection previously established. Given that with this technique it is possible to implement in vivo applications, in this work, a process was developed for the MDT that is capable of generating the minimum radiation exposure in imaging EDXRF. For this proposal, the MDT is determined for metals, such as Fe, Cu, and Pb, given their great biomedical interest, in a series of equivalent bone and soft tissue phantom samples. Consequently, a criteria for global scanning time per dot was established, hence providing an elemental XRF image according to the As Low As Reasonably Achievable principles, i.e. as low an exposure as reasonably possible for each sample type studied by this sort of devices, in order to obtain appropriate information for each field of application. Copyright © 2015 John Wiley &amp; Sons, Ltd.

Magnetic-resonance pore imaging of nonsymmetric microscopic pore shapes.

Imaging of the microstructure of porous media such as biological tissue or porous solids is of high interest in health science and technology, engineering and material science. Magnetic resonance pore imaging (MRPI) is a recent technique based on nuclear magnetic resonance (NMR) which allows us to acquire images of the average pore shape in a given sample. Here we provide details on the experimental design, challenges, and requirements of MRPI, including its calibration procedures. Utilizing a laser-machined phantom sample, we present images of microscopic pores with a hemiequilateral triangular shape even in the presence of NMR relaxation effects at the pore walls. We therefore show that MRPI is applicable to porous samples without a priori knowledge about their pore shape and symmetry. Furthermore, we introduce "MRPI mapping," which combines MRPI with conventional magnetic resonance imaging (MRI). This enables one to resolve microscopic pore sizes and shapes spatially, thus expanding the application of MRPI to samples with heterogeneous distributions of pores.

Characterization of Human Head Phantom based on its Dielectric Properties for Wideband Microwave Imaging Application

Characterization of phantom material based on its electrical properties across 1 to 6 GHz is investigated and presented in purpose for modelling of a human head phantom. This article presents five phantom samples mimicking main head tissues, which are the tissue of grey matter, white matter, cerebral spinal fluid (CSF), blood and skin. The preparation of phantom samples is performed by using common and cheap materials, which are jelly powder, gelatine, water and sugar. The characteristics of materials used are discussed on the composition ratios and electrical properties. The electrical properties of materials are measured using a special dielectric coaxial probe connected to a vector network analyser (VNA). The obtained data is analysed in terms of relative permittivity, and conductivity, for the observation and further discussion on the characterizations. This phantom of the human head tissues later can be applied in the microwave imaging system for a further study on the health monitoring of the human body.

PERFIDI FILTERS VALIDATION: FROM NUCLEAR MAGNETIC RESONANCE RELAXOMETRY TO MAGNETIC RESONANCE IMAGING

In order to well distinguish different tissues of the human body by magnetic resonance imaging (MRI), it is of great importance to find procedures to improve the image contrast. In particular, a valuable feature is to image only specific parts of organs and/or tissues while ignoring all the others. Dedicated MRI sequences able to filter the 1 H nuclei signals based on the different longitudinal relaxation times (T1) of the tissues have been developed. Standard signal selection/attenuation sequences, such as the Short Time Inversion Recovery and Multiple Inversion Recovery, have the effect to zero the signal for a discrete number of T1 values. Parametrically Enabled Relaxation Filters with Double and multiple Inversion (PERFIDI) sequences act on a range of T1 values and behave as an electronic band-pass or high-pass or low-pass filters. PERFIDI filters are therefore primarily focused on the components that pass through, rather than on those that are blocked. These filters have been developed and tested by nuclear magnetic resonance relaxometry. Here, these sequences have been validated for MRI on phantom samples to mimic T1 distributions present in tissues. Preliminary applications show that PERFIDI filters can effectively work on a range of T1 values to give well contrasted images.

Study of bond strength of an artificial tooth crown on a new post-and-core inlay (laboratory studies)

One of actual problems of orthopedic stomatology is prosthetics of patients with low and destroyed clinical crowns. The objective of the research is the study of the quality of fixation of artificial crowns on the new post-and-core of our and known construction using different permanent fixing materials. The experimental groups of phantom samples served as the object of the study.