Solution pH Research Articles

Pristine and Nature‐Inspired Hematite (α‐Fe2O3) Nanoparticles and Search for their Photocatalytic Application

AbstractThe article describes synthesis of green‐mediated hematite nanoparticles (20–30 nm) using Polianthes tuberosa flower extract. Structural, microscopic, and magnetic studies confirm the synthesis of iron oxide nanoparticles of pure hematite phase. Spectroscopic techniques are employed to identify different electronic transitions and defect levels as well as to estimate the energy bandgap and Urbach energy. A correlation among the particle size, bandgap energy, and Urbach energy is noticed. These hematite nanoparticles act as visible light photocatalyst which degrade dye in aqueous medium without the addition of any additives. The catalyst particle size, catalyst quantity, pH of dye solution, and solution temperature have significant impact on the photodegradation process of dye molecules in aq. solution. All observations advocate that green synthesis of hematite nanoparticles with Polianthes tuberosa flower extract can significantly modulate their optical and photocatalytic properties. These materials may find potential uses in water splitting for hydrogen production and purification of water by removing organic pollutants. The study highlights that using commercially cheap starting materials and extract made from naturally available plant parts, materials having huge application potentials can be synthesized at low cost by the simple green synthesis approach.

Synergistically enhanced heterogeneous activation of dissolved oxygen for aqueous carbamazepine degradation over S(III) coupled with siderite

The wide occurrence of emerging contaminants (ECs) was drawing more attention due to the potential hazard and threat on human and environment. Carbamazepine (CBZ) is a widely prescribed medication that has garnered considerable research interest with the exposures exceeding the environmental carrying capacity. We have established the innovative heterogeneous advanced oxidation process (AOPs) based on the activated dissolved oxygen (DO) coupled with S(III) and natural iron ore (siderite). In S(III)/O2/siderite system, we investigated the degradation efficiency, reactive species generation mechanism, and degradation pathway of CBZ. CBZ degradation and mineralization rate were 90% above and ∼15% with the reaction time of 40 min. The degradation of CBZ conformed to a pseudo-first-order kinetic model, with an activation energy determination of 76.36 kJ/mol. The optimal initial solution pH was the weak acid condition (pH = 4–6) for CBZ degradation. Moreover, the inhibition effects of coexisting substance including Cl−, HCO3−, and natural organic matter (NOM) on CBZ removal were observed, while the coexisted SO42− exhibited no significant influence. In addition, the reactive species generated in S(III)/O2/siderite system were predominantly identified as sulfate radical (SO4∙-) and hydroxyl radical (∙OH). The crucial intermediate complexes, Fe(III)S(IV)O3(+) and Fe(II)HS(IV)O3(+), was proposed to form in the initial stages of the reaction, which upon decomposition, yielded SO4∙- along with other reactive species. The degradation pathway of CBZ primarily involved deamination, oxidative ring-opening, hydroxylation, decarboxylation, and ketone degradation processes. This work provides the effective approach for the CBZ degradation with the mild reaction conditions and the sustainable technology for ECs treatment and control.

Stability and dissolution of single-crystalline iron oxide thin films in electrochemical environments

The stability of single-crystalline monolayer FeO(111) and 10 nm thin Fe3O4(111) films on Pt(111) upon exposure to environments of increasing chemical complexity has been studied with X-ray photoelectron spectroscopy, temperature-programmed desorption, in-situ scanning tunneling microscopy, and cyclic voltammetry. The well-defined oxide films, which were prepared under ultrahigh-vacuum conditions, were exposed to aqueous solutions of different pH and electrochemical cycling in pure and catechol-containing electrolyte. The films are stable in neutral (pH 7) and alkaline (pH 13) solutions both at open circuit conditions and during electrochemical cycling within the limits of hydrogen and oxygen evolution potentials. Also in strongly acidic (pH 1) perchlorate solution the films remain intact under open circuit conditions, but they quickly dissolve on application of electrochemical potential. Especially for the ultrathin FeO(111) films, catechol enhances the dissolution at neutral pH during electrochemical cycling. A comparison of Pt(111), FeO(111) and Fe3O4(111) substrates in the electrochemical catechol oxidation reaction reveals enhanced and sustained activity of FeO in alkaline environment, while strong deactivation occurs on Pt(111) and Fe3O4(111). This is explained by the weaker interaction between catechol and FeO(111) compared to the other substrates, which hampers the formation of a barrier layer on the electrode surface.

Remediation of fluoride-contaminated wastes: Chelator-assisted washing and subsequent immobilization using CaO and H3PO4

Fluoride (F) contamination in industrial waste is a significant challenge for sustainable materials recycling. Existing techniques for mitigating F contamination focus on immobilization, converting F compounds to insoluble forms while leaving the total F content untreated. Chelator-assisted washing is considered a promising alternative remediation strategy that can indirectly release F by entrapping and dissolving F-bearing minerals. This study evaluates the effectiveness of chelator-assisted washing in removing F from three real F-contaminated waste samples (TCS-49, TCS-51, and TCS-52) by treating with four different chelators, ethylenediaminetetraacetic acid (EDTA), ethylenediamine N,N′-disuccinic acid (EDDS), diethylenetriaminepentaacetic acid (DTPA), and 3-hydroxy-2,2′-imino disuccinic acid (HIDS). The influence of key washing variables, including chelator type, solution pH, chelator concentration, washing time, and liquid-to-solid (L/S) ratio toward F extraction was assessed and optimized for attaining the maximum extraction. All chelators exhibited the highest F extraction from TCS-49 and TCS-51 at pH 11, whereas in TCS-52 it showed a discrete extraction pattern. Under optimized conditions (concentration, 10 mmol L−1; pH, 11; washing duration, 3 h; and L/S ratio, 10:1), EDTA outperformed the other chelators, enhancing F extraction by 2.1 and 1.2 times for TCS-49 and TCS-51, respectively, compared with those of control treatments. However, for TCS-52, the efficiency of EDTA was analogous to that of the control under the same washing conditions. The linear correlation between the extracted F and F-containing minerals suggests that the chelator-induced F removal from contaminated waste involves the entrapment and dissolution of F-bearing minerals, especially Ca and Fe. The subsequent post-washing immobilization of chelator-washed waste residues using CaO or H3PO4 significantly reduced the content of leachable F under the regulatory limit.

A simple and effective procedure for trace Pb(II) preconcentration and analysis in milk powders using alginate/chitosan/PVA composite as adsorbent

Keeping the sustainability concept in view, this work couples natural occurring materials, chitosan and alginate, and polivinylalcohol (PVA) to synthesize an Pb(II) efficient adsorbent (CAP) and describes a rapid preconcentration technique using syringe solid-phase extraction (SPE) for trace Pb(II). Subsequently, the CAP material was characterized by FTIR, XPS, and SEM-EDX. Several critical parameters were optimized, including pH value, CAP dose, sample and eluent cycle, HNO3 concentration as the eluent, preconcentration factor, selectivity, and reusability. To compare experimental parameter optimization with conventional methods, central composite design (CCD) was utilized to reduce factors. The optimum conditions were determined as follows: a sample solution pH of 5, a CAP mass of 100 mg, 5 cycles of sample and eluent, a maximum HNO3 concentration of 2 mol L–1, and a preconcentration factor of 100 times. Validation results with certified reference materials showed a very high Pb(II) recovery of 97.6 %. The method's limit of detection (LOD) was 4.19 µg L–1 with an RSD of 0.77 %. Under optimal conditions, the recovery of three milk powder samples ranged from 90.0 % to 98.4 %. The proposed syringe SPE procedure has been successfully applied to milk powder samples.

Mn3O4-FeS2/Fe2O3 composite as peroxidase-mimics for the degradation of Bisphenol A

Due to the benefits of artificial peroxidase-like enzymes, Flower-like Mn3O4-FeS2/Fe2O3 composites with multiple active sites prepared by a one-step solvothermal method.The synergistic cyclic reaction between Mn and Fe on the catalyst surface enhances the generation of active radicals, which together promote the efficient degradation of BPA. In the presence of hydrogen peroxide (H2O2), Mn3O4-FeS2/Fe2O3 could generate hydroxyl radicals (·OH) and superoxide radicals (·O2-) in buffer solution of pH=4.5 and catalyze the oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) to blue oxidation products (ox TMB). The steady-state kinetic constants (Km) of TMB and H2O2 were obtained by Michaelis-Menten and Lineweaver-Burk models, which are 1.34 mM and 1.00 mM, respectively. This reveals the nice catalytic efficiency of Mn3O4-FeS2/Fe2O3 as enzyme mimics. Under the condition of 10 mg Mn3O4-FeS2/Fe2O3 catalyst, 100 μL H2O2 and pH = 4.5, the degradation efficiency of Bisphenol A (BPA) reaches 100 % when treating 40 mL of 50 mg L−1 BPA for 30 min at room temperature. Moreover, after 5 cycles of degradation, the BPA degradation efficiency of 85.8 % was still maintained. Therefore, the as-prepared Mn3O4-FeS2/Fe2O3 sample could potentially be applied in wastewater treatment.

Enhancing Oxygen Evolution Reaction Performance with rGO/CoNi-Prussian Blue-Derived Oxyhydroxide Nanocomposite Electrocatalyst: A Strategic Synthetic Approach.

Electrochemical water splitting is a promising approach in the development of renewable energy technologies, providing an alternative to fossil fuels. It has attracted considerable attention in recent years. The benchmark materials used in water splitting are precious metals that are expensive and scarce. Therefore, this work proposes a strategic electrochemical synthesis of a reduced graphene oxide and cobalt-nickel hexacyanoferrate (rGO/CoNiHCF)-derived composite (rGO/CoNiPBd-OOH) to achieve optimized OER performance. The optimum rGO/CoNiHCF was fabricated with the Co:Ni precursors in a 3:1 ratio with a ferricyanide solution of pH = 1.0. Using an alkaline electrochemical treatment, the well-distributed globular particles of CoNiHCF over rGO sheets were converted into layered frameworks of metallic (oxy)hydroxide species, giving the final rGO/CoNiPBd-OOH nanocomposite. This nanocomposite presented favorable kinetic activity resulting in a Tafel slope of 33 mV dec-1, while rGO, CoNiPBd-OOH, and RuO2 exhibited slopes of 80, 47, and 51 mV dec-1, respectively. Although the benchmark RuO2 electrocatalyst showed a lower overpotential (240 mV dec-1) at a current density of 10 mA cm-2, the rGO/CoNiPBd-OOH performed well with an overpotential of 346 mV, combined with superior stability compared to CoNiPBd-OOH and RuO2, maintaining a current density of 10 mA cm-2 for 15 h with an overpotential loss of 6.92%. This work successfully presents an "all-electrochemical" synthesis of a rGO/CoNiHCF-derived material with remarkable electrocatalytic activity for OER assisted by a strategic preparation methodology, which helped to understand the influence of synthetic parameters and choose their conditions to achieve the optimum OER performance.

Non-radical activation of peracetic acid by Fe-Co sulfide modified activated carbon for the degradation of refractory organic matter

Recently, the non radical activation system had attracted much attention due to its strong anti-interference ability. In this study, a novel FeCo2S4/activated carbon (AC) catalyst was prepared and used to construct a non radical dominated degradation system. Due to the electron-donating groups (C-OH) of AC and the conversion of free radicals generated from the activation of PAA by iron (Fe) and cobalt (Co) ions, a large amount of singlet oxygen (1O2) were produced, making the activation system possessed excellent universality and applicability for the removal of organic pollutants. Within 5 min, about 89.87 % of tetracycline hydrochloride (TCH) was removed in FeCo2S4 /AC + PAA. After only 20 min of reaction, the TCH removal efficiency reached 94.12 %, accompany with the reaction rate reached 0.099 min−1. Other organic pollutants including ibuprofen (IBU), sulfamethoxazole (SMX), ciprofloxacin (CIP), p-nitrophenol (PNP) and atrazine (ATZ) were also efficiently removed within 20 min, with the removal efficiencies were 92.0 %, 91.5 %, 89.4 %, 88.3 %, and 84.5 %, respectively. When the solution pH changed from 5.01 to 9.48, FeCo2S4 /AC also showed excellent catalytic performances, with the TCH removal rates were maintained at over 85.18 %. Moreover, the removal rate of TCH still reached 90.23 % after 5 recycles. This study offered an efficient non-radical peracetic acid (PAA) activation system, which can be effectively used to degrade refractory organic pollutants from complex water environment.

Adsorption Desulfurization of Simulated Diesel Fuel Using Graphene Oxide

Graphene oxide (GO) was synthesized from graphite powder by the improved Hammers method and used for the adsorption of organosulfur compound (dibenzothiophene, DBT) from model diesel fuel. FT-IR spectroscopy, X-ray diffraction, SEM, EDX, and BET were used to characterize the GO. Several factors, such as solution pH, initial DBT concentration, adsorption contact time, adsorption temperature, and adsorbent dosage were used to test the DBT removal efficiency. The results show that the maximum removal was 96.4% at pH = 5, initial solution concentration of 200 ppm, adsorption time of 45 min, temperature of 45C and adsorbent dosage of 0.4 g/25 mL.

Separation of Co(II), Mn(II), and Ni(II) by solvent extraction with Cyanex 272 and D2EHPA from the sulfuric acid leaching solution of spent lithium-ion batteries

Spent lithium-ion batteries contain valuable metals such as cobalt, lithium, manganese and nickel. Smelting reduction of spent LIBs at high temperature results in metallic alloys. Therefore, it is necessary to recover the valuable metal ions present in the sulfuric acid leaching solutions of the metallic alloys. In this work, solvent extraction experiments were performed to separate the three metal ions, Co(II), Mn(II) and Ni(II) present in the leaching solutions of the metallic alloys. Synthetic sulfate solutions were prepared and commercial organophosphorous extractants were employed. First, both Co(II) and Mn(II) were completely extracted in one stage by using 40% saponified 0.3 M Cyanex 272, leaving Ni(II) in the raffinate. The small amount of Ni(II) co-extracted into Cyanex 272 was removed by two stages of cross-current scrubbing using pure CoSO4 solution. The effect of pH and CoSO4 concentration of the scrubbing solution on the scrubbing of Ni(II) was investigated. The Co(II) and Mn(II) present in the scrubbed Cyanex 272 were completely stripped by 0.05 M H2SO4 solution. Batch simulation experiments for the three stage of counter-current extraction with 1 M D2EHPA verified that Mn(II) and Co(II) were completely separated by selective extraction of Mn(II) into D2EHPA, leaving Co(II) in the raffinate. By consecutive extraction with Cyanex 272 and D2EHPA, pure solutions of Co(II), Mn(II) and Ni(II) with purity higher than 99.9% can be recovered from the starting solutions. A process was proposed for the treatment of sulfuric acid leaching solutions of spent LIBs containing Co(II), Mn(II) and Ni(II) by solvent extraction.

Synthesis and Characterization of Low-Cost Zirconium Nanocomposites as Novel Adsorbents for Arsenazo III Pollutant

Removing contaminated Arsenazo III dye from contaminated effluent is a challenge and of great interest due to its hazard and environmental impact. Therefore, the biggest challenge was producing highly efficient, easy to recycle, and economically inexpensive adsorbent materials for the contaminated dye. Three chemically stable zirconium nanocomposites with unique properties were synthesized by gel-precipitation technology. The composition, chemical, and physical properties of zirconium molybdate, tungstate, and silicate nanocomposites have been extensively proven using many different and appropriate devices such as XRD, SEM–EDX, TEM, FT-IR, BET, DLS, TGA-DTA, and zeta potential. By utilizing the most effective adsorption techniques, Azo-dye was successfully bound to ZrMo-NPs, ZrW-NPs, and ZrSi-NPs composites. The uptake capacities for these composites were measured at 0.29, 0.79, and 1.61 mmol.g−1, respectively. The sorption parameters were optimized as follows: a feed solution pH of 3 for ZrMo-NPs, a pH of 2.3 for ZrW-NPs, and a pH of 2.3 for ZrSi-NPs. The stirring time was set at 30 min, the metal ion concentration was 1.64 mmol L−1, and the sorbent dose was 7.5 mg. The adsorption results agreed well with the Langmuir isotherm and the pseudo-second-order reaction models and demonstrated the endothermic nature and kinetic improvement by increasing temperatures. The three nanocomposites effectively eliminated tainted dye from lab wastewater, offering promise for their potential applications in the future.Graphical

Rapid room temperature synthesis of CuBi2O4 via ball-milling strategy boost light-driven persistent activation of hydrogen peroxide

Photo-Fenton technology with the superiorities of photocatalysis and traditional Fenton catalysis can improve the catalytic efficiency of photocatalytic materials and thus achieve efficient degradation for organic pollutants. However, exploring a low-cost catalyst with excellent catalytic performance using a simple method remains a challenge. In this work, CuBi2O4 photocatalyst synthesized by a mechanical ball-milling strategy (M-CuBi2O4) was exploited and used for tetracycline (TC) degradation. The impact of solution pH and H2O2 dosage on the photo-Fenton degradation efficiency of M-CuBi2O4 towards TC was investigated. M-CuBi2O4 exhibited significant 85.1% of photo-Fenton catalytic activity for TC removal, which was 9.35 times higher than that of CuBi2O4 synthesized by hydrothermal method (H-CuBi2O4). The enhanced catalytic performance of M-CuBi2O4 was due to the superior charge carrier separation efficiency, wider photo-response range and increased generation of active species. The primary active substances involved in the photo-Fenton reaction for TC degradation were determined to be hydroxyl radicals (•OH), superoxide radicals (•O2-), and singlet oxygen (1O2). This study provides a streamlined and rapid approach for macro preparation of high-performance photocatalysts for dealing with antibiotic-contaminated wastewater.

Resistance of the welded joint of X70 steel for main gas pipelines against corrosion-mechanical cracking under cathodic polarization in near-neutral pH solutions

ABSTRACT Resistance of welded joint of X70 steel welded using Sv-08G1NMA and OK 10-74 flux wire against stress-corrosion cracking in near-neutral pH solution NS4 was investigated by slow-strain rate method, voltammetry, optical and scanning electron microscopy, electrolytic permeation of hydrogen. It was established that the stress-corrosion cracking of welded joint occurs through the base metal in the range of potentials more positive than −0.921 V by the anodic dissolution mechanism, more negative than −1.050 V is consistent with a hydrogen embrittlement mechanism, and in the potentials' range from −0.921 V to −1.050 V – both by the anodic dissolution and hydrogen embrittlement mechanism. The susceptibility to stress-corrosion cracking coefficient KS increases with the polarization potential shift −0.750 V → −0.950 V → −1.050 V as follows: for the welded joint – 1.1 → 1.16 → 1.35, for X70 steel as 1.0 → 1.12 → 1.0.

Exploring the sorption/desorption of nitenpyram in loess soils: implications for neonicotinoid fate and ecological risk assessment.

Neonicotinoids are widely used insecticides that accumulate in various environmental matrixes and potentially harm non-target organisms. However, the mechanism of sorption/desorption of neonicotinoids in different loess soils remains poorly understood. Therefore, this study investigated the sorption/desorption of nitenpyram (NIT), a commonly used neonicotinoid, in three different types of loess soils and examined factors influencing the adsorption process using batch experiments. The findings revealed that NIT reached adsorption equilibrium in 4h in all three loess soil samples. The R2 value (> 0.898) obtained from fitting the sorption/desorption kinetics indicated a good match with the pseudo-second-order model, suggesting the involvement of multiple mechanisms, including chemisorption. The linear and Freundlich models also adequately described the sorption of NIT in loess soils. Additionally, a clear hysteresis phenomenon was observed. The adsorption capacity of NIT is significantly related to the adsorption temperature, solution pH and ionic strength. Upon increasing the initial concentration, the equilibrium adsorption capacity of NIT for gray-cinnamon soil, sierozem, and cultivated loessial soil increased from 3.56, 2.51, and 2.64mg/kg to 8.49, 3.92, and 5.22mg/kg, respectively. FTIR spectral analysis revealed that the adsorption of NIT in loess soil was primarily governed by mixed mechanism. This study elucidates the behavior and fate of NIT in soil-water systems in the Northwest, while also establishing a foundation for assessing its ecological risks. The findings have significant practical implications for the future development of environmental management and pollution control strategies.

Revisiting oxidation and reduction reactions for synthesizing a three-dimensional hydrogel of reduced graphene oxide.

An improvement to Hummers' method involving a cascade-design graphite oxidation reaction is reported to optimize safety and efficiency in the production of graphite oxide (GrO) and graphene oxide (GO). Chemical reduction using highly alkaline ammonia solution is a novel approach to synthesizing reduced graphene oxide (RGO). In this original research, we revisit the oxidation and reduction reactions, providing significant findings regarding the synthetic pathway to obtain a bioinspired water-intercalated hydrogel of RGO nanosheets. Influential factors in the graphite oxidation reaction, typically the exothermic reaction temperature and hydrogen peroxide effect, are described. Furthermore, the chemical reaction of GO reduction using highly alkaline ammonia solution (pH 14) was investigated to produce hydrated RGO nanosheets assembled in a hydrogel structure (97% water). Three-dimensional assembly and water intercalation are key to preserve the non-stacking state of RGO nanosheets. Therefore, ultrasound transmission to aqueous channels in the macroscopic RGO hydrogel vibrated and dispersed the RGO nanosheets in water. Analytical results revealed the single-layer nanostructures, functional groups, optical band gaps, optimized C/O ratios, particle sizes and zeta potentials of GO and RGO nanosheets. The reversible self-assembly of RGO hydrogels is essential for many applications, such as RGO coatings and polymer/RGO nanocomposites. In a water purification application, the RGO hydrogel was dispersed in aqueous solution by simple agitation and showed a high capacity for organic dye adsorption. After the adsorption, the RGO/dye particles were easily removed by filtration through ordinary cellulose paper. The process of adsorption and filtration is effective and inexpensive for practical environmental remediation. In summary, a bioinspired structure of RGO hydrogel is conceptualized for prospective nanotechnology.

Experimental and Theoretical Studies on the Adsorption of Bromocresol Green from Aqueous Solution Using Cucumber Straw Biochar

Biochar prepared from crop straw is an economical method for adsorbing bromocresol green (BCG) from textile industrial wastewater. However, there is limited research on the adsorption mechanism of biochar for the removal of BCG. This study utilized cucumber straw as raw material to prepare biochar with good adsorption potential and characterized its physicochemical properties. Through adsorption experiments, the effects of solution pH, biochar dosage, and initial dye concentration on adsorption performance were examined. The adsorption mechanism of cucumber straw biochar (CBC) for BCG was elucidated at the molecular level using adsorption kinetics, adsorption isotherm models, and density functional theory (DFT) calculations. Results show that the specific surface area of the CBC is 101.58 m2/g, and it has a high degree of carbonization, similar to the structure of graphite crystals. The presence of aromatic rings, –OH groups, and –COOH groups in CBC provides abundant adsorption sites for BCG. The adsorption process of CBC for BCG is influenced by both physical and chemical adsorption, and can be described by the Langmuir isotherm model, indicating a monolayer adsorption process. The theoretical maximum monolayer adsorption capacity (qm) of BCG at 298 K was calculated to be 99.18 mg/g. DFT calculations reveal interactions between BCG and CBC involving electrostatic interactions, van der Waals forces, halogen–π interactions, π–π interactions, and hydrogen bonds. Additionally, the interaction of hydrogen bonds between BCG and the –COOH group of biochar is stronger than that between BCG and the –OH group. These findings provide valuable insights into the preparation and application of efficient organic dye adsorbents.

Fabrication of temperature-regulated sorbitol/mannitol-doped copper oxides derived from a Cu complex and their photocatalytic properties

In this study, a series of composites containing copper oxide (CuxO) particles doped with sorbitol/mannitol, namely Cu/CuxO@C (x = 1 or 2), was successfully derived from a novel copper complex ([Cu(IPZ)2Cl2] (Cu-Complex), where IPZ = 4-Iodopyrazole) by pyrolysis method and exploiting the stability and modulation of the coordination sites of sorbitol/mannitol, which exhibited excellent photocatalytic properties. The results showed that Cu/CuxO@C possessed high efficiency in degrading rhodamine B (RhB), gentian violet (GV), methyl orange (MO) and Congo red (CR) dyes under UV irradiation, and the degradation effect was gradually enhanced with the increase of calcination temperature. The structural and chemical states of the materials were characterised in detail. Furthermore, the effects of experimental factors such as catalyst dose, solution pH, and inorganic anions on dye degradation efficiency were investigated. The photocatalytic mechanism study demonstrated that the primary oxygen-active substance was superoxide radical (·O2-). The electron transport hypothesis explains the effective separation of electrons and holes within a substance. The Cu/CuxO@C composite was regarded as a potential photocatalyst for dye wastewater treatment due to its high photocatalytic efficiency, reusability, and universality, offering a novel solution to environmental and energy issues.

Under Water Superelastic Porous Nanofibrous Sponge for Efficient RNA Separation and Purification.

Developing monolithic materials for chromatography columns with a novel interconnected porous structure is vital for the enhancement of the separation efficiency of RNA purification processes. Herein, a porous nanofibrous sponge (PNFS) is constructed by freeze molding and freeze-drying a nanofiber dispersion with ethylene vinyl alcohol copolymer nanofibers as the skeleton, chitosan (CS) and polyethylenimine (PEI) as the binders, and glutaraldehyde (GA) as the crosslinking agent. The results show that when the CS content of the dispersion is 1.5 wt %, PNFS demonstrates a high static adsorption capacity of 406.5 mg/g (30.7 mg/m2) and a dynamic adsorption capacity of 382.6 mg/g (28.9 mg/m2) at a flow rate of 1 mm/min. Moreover, PNFS shows a high specific adsorption performance toward RNA in the presence of bovine serum albumin, lecithin, or DNA by adjusting the solution pH value and the method of gradient elution. Besides, PNFS presents exceptional performance in the rapid separation of RNA from HT22 cells without degradation. This result can be attributed to optimized morphology, pore structure, and comprehensive performance of PNFS, benefiting from the synergistic effect of the highly oriented porous structure and CS-PEI interaction derived from the high-density adsorption ligands on the channel walls of PNFS. This work provided an efficient strategy to handle the permeability/adsorptivity trade-off for ion-exchange chromatographic materials.

Hydrothermal fabrication of composite chitosan grafted salicylaldehyde/coal fly ash/algae for malachite green dye removal: A statistical optimization

In this study, chitosan grafted salicylaldehyde/coal fly ash/algae (Chi-SL/CFA/Alg) was synthesized by assistance of hydrothermal process to be an effective adsorbent to remove cationic dye (malachite green: MG) from water. The physicochemical properties of the Chi-SL/CFA/Alg biomaterial were examined using SEM-EDX, pHpzc, specific surface area (BET), and FTIR analyses. The optimization process of the adsorption operation parameters for MG removal by Chi-SL/CFA/Alg were optimized using a Box-Behnken design (BBD). The selected adsorption operation parameters Chi-SL/CFA/Alg dosage (A: 0.02–0.8 g/100 mL), solution pH (B: 4–8), and contact time (C: 20–360 min). Analysis of variance (ANOVA) test was applied to determine the significant interaction between the adsorption operation parameters and to validate BBD output. The adsorption kinetics and isotherms of MG dye by Chi-SL/CFA/Alg were well described by pseudo-second order (PFO) kinetic and Freundlich isotherm model respectively. Thus, the maximum adsorption capacity (qmax) of MG dye by Chi-SL/CFA/Alg was found to be 493.7 mg/g at basic pH environment (pH = 8) and working temperature 25 °C. The adsorption mechanism can be ascribed to various interactions, including hydrogen bonding, π-π interactions, electrostatic attraction, and n-π interactions. Thus, Chi-SL/CFA/Alg can be considered as preferable and potential adsorbent for removing cationic dye from aqueous environment.

A novel potato peels waste β-cyclodextrin biocomposite for the efficient uptake of diuron and glyphosate herbicides.

A novel biocomposite (FPPW-β-CD) was prepared by a simple and sustainable method involving fine potato peel waste, β-cyclodextrin (β-CD), and green citric acid through the crosslinking reaction. The polymer was characterized using SEM, FTIR, XRD, TGA, and DSC analyses. The adsorbent performance was evaluated about the glyphosate and diuron adsorption from the aqueous solution. Pesticide removal was investigated regarding the influence of solution pH, temperature, and initial concentration of contaminants. Also, it highlights the main interactions involved in the adsorption phenomenon based on the pH effect and characteristics of adsorbent and adsorbate molecules. The maximum adsorption capacity values according to the Sips model were higher than 2000µgg-1. The pseudo-second-order and general-order models described the kinetic data well. Thermodynamic parameters indicated that pesticide removal was spontaneous and favorable. The magnitude of enthalpy variation values (27.37kJmol-1 and - 100.79kJmol-1) revealed that the glyphosate and diuron adsorption occurred through the physisorption and chemisorption, respectively. The novel biocomposite is a promising green adsorbent for the uptake of micropollutant pesticides in aqueous solutions at concentrations of µg L-1.