Percutaneous Screw Research Articles

Accuracy in Navigated Percutaneous Sacroiliac Screw Fixation: A Systematic Review and Meta-Analysis

Abstract Background Percutaneous sacroiliac screw placement is a challenging procedure in patients with pelvic fractures. To overcome these challenges, navigated techniques have emerged as an alternative to conventional 2D fluoroscopy for guiding screw placement. However, it remains to be seen whether navigated techniques truly have a beneficial effect on accuracy, radiation exposure and occurrence of complications. Aims We performed a meta-analysis to investigate whether navigated techniques are superior to conventional 2D fluoroscopy in percutaneous sacroiliac screw fixation. Methods The electronic databases were searched for both randomized clinical trials and observational studies comparing percutaneous sacroiliac screw fixation with 2D fluoroscopy to new navigated techniques (2D or 3D fluoroscopic navigation with a c-arm, computer assisted ultrasound navigation, O-Arm navigation, mobile CT navigation, robotic navigation). Effects were pooled and presented as odds ratio, mean difference, and standardized mean difference with corresponding 95% confidence interval. Results In total 18 studies were included. New navigated techniques had a higher accuracy (81% versus 91% with MD 10%, 95% CI 5-14%). The greatest benefit in accuracy was found in studies with more advanced navigated techniques (O-Arm, mobile CT or robotic navigation). Also, fluoroscopy time (MD 72.13 seconds, 95% CI 7.73;92.91) and fluoroscopy frequency (MD 17.22 images in total, 95% CI 7.73;26.70) were lower for new navigated techniques. Radiation dose was higher for new navigated techniques (SMD 0.50, 95% CI 0.01;0.99). Surgery duration showed no significant difference. Similar results were found among in vitro studies. Complications were rare in both groups. Conclusion This meta-analysis demonstrated a higher accuracy of screw positioning, lower fluoroscopic frequency and time for navigated percutaneous sacroiliac screw fixation compared to conventional 2D fluoroscopy. Complications are acceptably low for both groups. Future studies should focus on which of the navigated techniques is the best and whether the implementation costs of a new technique outweigh its benefits.

Sensorless Based Haptic Feedback Integration In Robot-assisted Pedicle Screw Insertion For Lumbar Spine Surgery: A preliminary cadaveric study

Pedicle screw fixation is an essential surgical technique for addressing various spinal pathologies, including degenerative diseases, trauma, tumors, neoplasms, and infections. Despite its efficacy, the procedure poses significant challenges, notably the limited visibility of spinal anatomical landmarks and the consequent reliance on surgeon's hand-eye coordination. These challenges often result in inaccuracies and high radiation exposure due to the frequent use of fluoroscopy X-ray guidance. Addressing these concerns, this study introduces a novel approach to pedicle screw insertion by utilizing a robot-assisted system that incorporates sensorless based haptics incorporated 5-DOF surgical manipulation. This innovative system aims to minimize radiation exposure and reduce operating time while improving the surgeon's hand posture capabilities. The developed prototype, expected to be implemented using bilateral control, was tested through preliminary cadaveric experiments focused on the insertion of both percutaneous and open pedicle screws at the L4-L5 level of the lumbar spine. Validation of the Sensorless Haptic Feedback feature was an integral part of this study, aiming to enhance precision and safety. The results, confirmed by fluoroscopic x-ray images, demonstrated the successful placement of two percutaneous and two open pedicle screws, with average position and torque errors of 0.011 radians and 0.054 Nm for percutaneous screws, and 0.0116 radians and 0.0057 Nm for open screws, respectively. These findings underscore the potential of the sensorless haptic feedback in a robot-assisted pedicle screw insertion system to significantly reduce radiation exposure and improve surgical outcomes, marking a significant advancement in spinal surgery technology.

Arthroscopic treatment of femoral trochlear notch fracture caused by intra-articular dislocation of the patella

This case report presents a traumatic intra-articular patellar dislocation – associated intercondylar fracture of the distal femur – and the consequent arthroscope assisted reduction and percutaneous screw fixation. To the best of our knowledge, this is the first case in which the arthroscope assisted operative reduction and percutaneous screw fixation of the fracture fragment has been demonstrated. Our patient was a 55-year-old female who was treated by the aforementioned method which concluded with excellent results.

The Safety of Volar to Dorsal Percutaneous Screw Fixation of Bennett Fracture-Dislocation - A Cadaveric Study.

Background: Bennett fractures are traditionally fixed with percutaneous K-wires from dorsal to volar, or with a volar to dorsal screw via a volar open approach. While volar to dorsal screw fixation is biomechanically advantageous, an open approach requires extensive soft tissue dissection, thus increasing morbidity. This study aims to investigate the practicality and safety of Bennett fracture fixation using a percutaneous, volar to dorsal screw, particularly with regard to the median nerve and its motor branch during wire and screw insertion. Methods: Fifteen fresh frozen forearm and hand specimens were obtained from the University of Auckland human cadaver laboratory. A guidewire is placed under image intensifier from volar to dorsal with the thumb held in traction, abduction and pronation. The wire is passed through the skin volarly under image intensifier, then the median nerve is dissected from the carpal tunnel and the motor branch of the median nerve (MBMN) is dissected from its origin to where it supplies the thenar musculature. The distance between the K-wire to the MBMN is measured. Results: In 14 of 15 specimens, the wire was superficial and radial to the carpal tunnel. The mean distance to the origin of the MBMN is 6.2 mm (95% CI 4.1-8.3) with the closest specimen 1 mm away. The mean closest distance the wire gets to any part of the MBMN is 3.7 mm (95% CI 1.6-5.8); in two specimens, the wire was through the MBMN. Conclusions: Wire placement, although done under image intensifier, is subject to significant variation in exiting location. While research has shown the thenar portal in arthroscopic thumb surgery is safe, our guidewire needs to exit further ulnar to capture the Bennett fracture fragment, placing the MBMN at risk. This cadaveric study has demonstrated the proposed technique is unsafe for use.

Comparative Study of Calcaneal Fractures Treated with Percutaneous Screw Fixation and Plate Fixation

Comparative Study of Calcaneal Fractures Treated with Percutaneous Screw Fixation and Plate Fixation

Immediate management of a stable patient with unstable pelvis.

The diagnosis of a traumatic unstable pelvis in a stable patient is a temporary concept depending on when we see the patient, as all patients presenting with hemorrhagic shock have hemodynamic stability until they become unstable. As a rule, the more unstable the pelvic fracture is, the higher the risk of bleeding and hemodynamic instability it has. Therefore, in unstable pelvic fractures, hemodynamic stability should be a diagnosis by exclusion. For bleeding detection in stable patients, an immediate one-stage contrast-enhanced CT scan is the appropriate diagnosis test; however, since CT scan radiation is always an issue, X-rays should be considered in those cases of hemodynamically stable patients in whom there is a reasonable suspicion that no unsafe bleeding is going on. Pelvic fracture classification is essential as usually there is an association between the injury mechanism, the fracture displacement, and the hemodynamic stability. Anteroposterior and, particularly, vertical traumatisms have much more proclivity to provoke major pelvic displacement and bleeding. The use of a pelvic binder, as early as possible including pre-hospital management, should be standard in high-impact blunt trauma patients independently of the trauma mechanisms. External fixation is the preferred method of stabilization in case of open fractures, and, in closed ones, when the schedule for definite osteosynthesis prolongs because of the patient's general condition. If possible, immediate percutaneous sacroiliac screw insertion for unstable pelvic fractures produce excellent results even in open fractures.

Arthroscopy-Assisted Closed Reduction and Percutaneous Internal Fixation for Medial Malleolus Fracture.

Arthroscopy-assisted closed reduction and percutaneous internal fixation is a minimally invasive technique for medial malleolus fracture treatment. The purpose of the study was to assess the quality and functional outcomes of this technique. Seventy-eight patients with combined medial malleolus fractures were treated with arthroscopy-assisted closed reduction and percutaneous screw fixation technique. The surgical procedure was described in detail; the clinical efficacy of this method was evaluated in terms of time of operation, postoperative complications, and fracture healing time; and functional outcomes were analyzed. All of the patients were followed up for a minimum of 12 months without complications of the medial malleolus wound, and all of the medial malleolus fractures healed within 6 to 8 weeks. At the last follow-up, the visual analog scale scores ranged from 0 to 3 and the American Orthopaedic Foot and Ankle Society ankle and hindfoot function scores ranged from 75 to 95. Arthroscopy-assisted closed reduction and percutaneous internal fixation makes the treatment of medial malleolus fractures less invasive compared with traditional surgical methods and allows simultaneous exploration and management of the articular surface.

The Reinforced Cementoplasty with Spindles Technique

Reinforced cementoplasty with spindles is a recently introduced technique that is mainly used for pathological fractures or for bone metastases at risk of fracture in locations with shear stresses. The technique is less challenging to perform than percutaneous screw insertion and does not require equipment sterilization. No general anesthetic is required. A small trocar is all that is needed, and sutures are often unnecessary. Reinforced cementoplasty can therefore be considered as a technical evolution of cementoplasty with the simple addition of material within the trocar. This technique deserves more awareness so that it can be included in interventional radiologists’ range of procedures.

Single-Stage Lateral Anterior-to-Psoas Interbody Fusion and Facet Screws as a Treatment for L5–S1 Adjacent Segment Disease in a Patient With a Long-Segment Construct

Objective: Adjacent segment disease (ASD) occurs in 9% of patients with long-segment lumbar spine fusion and results from the transmission of a greater degree of stress to the segments cranial and caudal to a fused segment. The treatment of symptomatic ASD typically involves extending fusion to the involved segment. Revision and extension of posterior instrumentation bears the disadvantage of involving the exposure and modification of old hardware. Lateral interbody fusion cannot be performed at L5/S1 due to the iliac crest. Anterior lumbar interbody fusion typically still requires flipping the patient to augment the construct posteriorly. Here, we present a method to treat L5/S1 ASD using single-position anterior-to-psoas (ATP) interbody fusion combined with facet screw instrumentation.Methods: An 80-year-old man, who had undergone L2-5 fusion 27 years ago, presented with persistent lower back pain and gait dysfunction with imaging findings of L5/S1 spondylosis and ASD. Under intraoperative computed tomography navigation, left L5/S1 ATP interbody fusion was performed with simultaneous L5/S1 percutaneous facet screw fixation. Results: The abdominal incision was 4.0 cm and the single posterior incision was 1.5 cm long. Blood loss was lower than 10 mL, and the procedure lasted for less than 1.5 hours. The patient was discharged to rehabilitation after 3 days.Conclusion: ATP interbody fusion enabled the placement of an interbody device with a large footprint to promote fusion and reduce the risk of subsidence and pseudoarthrosis. The combined use of interbody fusion and facet screws obviates the need to link to the previous construct.

Static Plantar Pressure under Different Conditions in Children with Surgically Treated Unilateral Slipped Capital Femoral Epiphysis.

Slipped capital femoral epiphysis (SCFE) is the most common hip disease during infancy and adolescence. Our study aimed to analyze static plantar pressure in children with surgically treated unilateral SCFE. Twenty-two children with right SCFE with in situ fixation with one percutaneous screw were assessed by PoData plantar pressure analysis under three different conditions (open eyes, eyes closed, and head retroflexed). The total foot loading was significantly higher on the unaffected limb compared with the affected one for all the three testing conditions (p < 0.05). When assessing the differences between testing conditions, there were no significant differences for the right and left foot loadings, or for the three sites of weight distribution, except for the right fifth metatarsal head (lower loading in eyes-closed condition in comparison to eyes open, p = 0.0068), left fifth metatarsal head (increased loading in head-retroflexed condition in comparison to eyes open, p = 0.0209), and left heel (lower loading in head-retroflexed condition in comparison to eyes open, p = 0.0293). Even after a successful surgical procedure, differences in foot loading can impact the postural static activities in different conditions (natural eyes-open, eyes-closed, or head-retroflexed posture).

Percutaneous intramedullary screw or rush pin fixation of unstable ankle fractures in patients with fragile soft tissue – retrospective study of 80 cases

IntroductionThe standard surgical procedure for unstable ankle fractures is fixation of the lateral malleolus with a plate and screws. This method has a high risk of complications, especially among patients with fragile skin conditions. The aim of this study was to estimate the re-operation rates and identify complications in patients with an unstable ankle fracture, surgically treated with an intramedullary screw or rush pin.Materials and methodsWe identified all patients who were surgically treated with either a 3.5-mm screw or rush pin at Aarhus University Hospital, Denmark, from 2012 to 2018. Major complications were re-operations within three months. We included 80 patients, of which 55 (69%) were treated with a 3.5-mm intramedullary screw and 25 (31%) with a rush pin. The majority of the study population was female (59) and the mean age was 75 (range 24 to 100) years. Of the 80 patients included, 41 patients had more than 2 comorbidities.ResultsThree patients underwent re-operation within three months due to either fracture displacement or hardware cutout. Radiographs obtained after six weeks showed that nine patients had loss of reduction. Additionally, four patients had superficial wound infections and six patients had delayed wound healing.ConclusionsIntramedullary fixation of distal fibula fractures with either a screw or rush pin has low re-operation rates. However, the high proportion of patients with radiological loss of reduction is concerning.

Does a novel 3D printed individualized guiding template based on cutaneous fiducial markers contribute to accurate percutaneous insertion of pelvic screws? A preliminary phantom and cadaver study

BackgroundMost 3D-printed guiding templates require dissection of soft tissues to match the corresponding surfaces of the guiding templates. This study sought to explore the accuracy and acceptability of the novel 3D printed individualized guiding templates based on cutaneous fiducial markers in minimally invasive screw placement for pelvic fractures.MethodsThe printed template was tested on five high-fidelity biomimetic phantom models of the bony pelvis and its surrounding soft tissues as well as on two fresh frozen cadavers. Four cutaneous fiducial markers were transfixed on each phantom model prior to performing CT scans to reconstruct their 3D models. Personalized templates for guiding screw insertion were designed based on the positions of the fiducial markers and virtually planned target screw channels after scanning, followed by 3D printing of the guide. Phase 1 consisted of five expert surgeons inserting one anterograde supra-pubic screw and one sacroiliac screw percutaneously into each phantom model using the 3D-printed guide. The deviation of screw positions between the pre-operative planned and post-operative actual ones was measured after registering their 3D modelling. A Likert scale questionnaire was completed by the expert surgeons to assess their satisfaction and acceptability with the guiding template. Phase 2 consisted of repeating the same procedures on the fresh frozen cadavers in order to demonstrate face, content and concurrent validity.ResultsIn Phase 1, all ten screws were successfully implanted with the assistance of the guiding template. Postoperative CT scans confirmed that all screws were safely positioned within the bony pelvic channels without breaching the far cortex. The mean longitudinal deviation at the bony entry point and screw tip between the pre-operative planned and post-operative actual screw paths were 2.83 ± 0.60 mm and 3.12 ± 0.81 mm respectively, with a mean angular deviation of 1.25 ± 0.41°. Results from the Likert questionnaire indicated a high level of satisfaction for using the guiding template among surgeons. In Phase 2, results were similar to those in Phase 1.ConclusionsThe 3D-printed guiding template based on cutaneous fiducial markers shows potential for assisting in the accurate insertion of percutaneous screws in the pelvis.

Successful coil embolization of a ruptured pseudoaneurysm of the superior gluteal artery after a percutaneous awake robot-assisted sacroiliac joint fusion: illustrative case.

Robot-assisted sacroiliac joint (SIJ) fusion has gained popularity, but it carries the risk of complications such as injury to the superior gluteal artery (SGA). The authors present the case of an awake percutaneous robot-assisted SIJ fusion leading to an SGA pseudoaneurysm. An 80-year-old male, who had undergone an awake percutaneous robot-assisted SIJ fusion, experienced postoperative left hip pain and bruising. Subsequent arteriography demonstrated an SGA branch pseudoaneurysm requiring coil embolization. An SGA injury, although uncommon (1.2% incidence), can arise from percutaneous screw placement, aberrant anatomy, or hardware contact. Thorough preoperative imaging, precise robot-assisted screw insertion, and soft tissue protection are crucial to mitigate risks. Immediate angiography aids in prompt diagnosis and effective intervention. Comprehensive knowledge of anatomical variants is essential for managing complications and optimizing preventative measures in robot-assisted SIJ fusion.

1073 Prone Transpsoas (PTP)-LLIF Approach Versus Standard LLIF in Patients Undergoing Surgical Revision Following Adult Spinal Deformity Correction Surgery

INTRODUCTION: Both the prone transpsoas (PTP) and standard LLIF have been developed to facilitate minimally invasive (MIS) indirect decompression, alignment correction, and posterior instrumentation. METHODS: A multi-center cohort of all patients was identified and all relevant data were retrospectively collected. Preoperative standing 36” scoliosis radiographs were retrospectively reviewed for pelvic incidence (PI), lumbar lordosis (LL), and PI minus LL (PI-LL mismatch). Postoperative regional sagittal alignment parameters were measured using the first postoperative standing 36” scoliosis radiographs. Finally, multivariable analysis was performed to assess the primary outcome measure: postoperative change in regional sagittal alignment (PI-LL mismatch). RESULTS: Two-hundred and two (n = 202) patients were retrospectively identified and included for formal analysis. One-hundred and fifty one (n = 151, 74.8%) of the patients underwent PTP revision while 51 (25.2%) underwent standard LLIF revision. Univariate analysis demonstrated a greater value for baseline mean pre-operative PI-LL mismatch in the PTP versus standard LLIF cohort (21.4 vs. 10.45°; p = 0.0001). Furthermore, multiple linear regression demonstrated that the PTP approach enabled significantly greater PI-LL mismatch change (p = 0.0017) and that this change was associated with the number of levels fused (p = 0.0481) as well as percutaneous (vs. open) screw placement (p = 0.0193). Finally, multiple logistic regression identified standard LLIF (p = 0.0378), female sex (p &lt; 0.0001), non-osteoporotic bone density (p &lt; 0.0001), and younger age (p &lt; 0.0001) as predictive of postoperative PI-LL mismatch &lt; 10° (the threshold under which such mismatch is no longer regarded as clinically significant deformity). CONCLUSIONS: Ultimately, PTP-LLIF was associated with greater net improvement in postoperative PI-LL mismatch, the primary outcome measure of this study. The present retrospective analysis therefore corroborated results of previous studies in suggesting that the utility of PTP-LLIF is translatable to ASD revision surgery.

WITHDRAWN: Concurrent palmar lunate dislocation and posterior elbow dislocation with a distal radius fracture: A rare case report

We present an unusual case involving the simultaneous dislocation of the trans scapho retro lunate in the right wrist and a posterio-lateral dislocation in the right elbow joint in a 23-year-old male. These injuries occurred when he fell onto his outstretched right hand. The elbow dislocation was successfully treated using a closed reduction method. External manipulation was employed to reduce the transscaphoid perilunate dislocation, which was subsequently stabilized through percutaneous screw fixation of the scaphoid using a triquetrum-lunate pin. Additionally, a styloid pin was utilized to address and manage a distal radius fracture, followed by the implementation of a radiometacarpal external fixator. After one year and three months, the patient reported no pain in his elbow and minimal wrist discomfort during heavy lifting.

Finite Element Analysis of Percutaneous Anterograde and Retrograde Screws in the Treatment of Superior Rami Pubis Fracture

PurposeThis study aims to evaluate the biomechanical characteristics of percutaneous antegrade and retrograde screws in treating superior pubic rami fractures in zone II, employing finite element analysis. It provides a theoretical basis for the treatment of the superior rami of pubis zone II fracture.MethodsThe software of Mimics and 3-Matic were utilized for reconstructing a fracture model of the superior pubic rami in zone II. Percutaneous screw implantation was simulated for treatment. Material properties were assigned using Mimics, and Ansys software was employed to simulate forces on the S1 vertebral endplate under a 500 N load in a standing posture. Mechanical stability was assessed by comparing these simulations.Results(1) Displacement and stress variations in the pubic bone and screws were consistent across the model and on the fracture site, whether the fracture was in zone I or zone II. However, in zone III, the displacement and stress experienced by the screws were markedly higher than those in zones I and II. (2) When employing an antegrade screw to simulate treatment of a superior pubic rami fracture in zone II, the maximum displacement and stress recorded were 0.88 mm and 15.53 MPa, respectively. Conversely, the use of a retrograde screw for treating a superior pubic rami fracture yielded a maximum displacement of 0.59 mm and stress of 5.51 MPa.ConclusionThe biomechanical analysis suggests that for zone II superior pubic rami fractures, where the fracture line is no more than 70 mm from the insertion point (encompassing zones I and II fractures), the use of retrograde screw implantation is preferable.

Optimizing percutaneous reduction and fixation with guidewire modification in pelvic and acetabular fractures: surgical technique and case series.

Minimally invasive percutaneous screw fixation for pelvic ring and acetabular fractures has become increasingly popular due to its numerous benefits. However, the precise placement of the screw remains a critical challenge, necessitating a modification of the current techniques. This paper introduces a refined technique employing a modified guidewire to enhance the precision and efficiency of percutaneous fixation in pelvic and acetabular fractures. This study details the surgical techniques implemented for correcting guidewire misdirection in percutaneous screw fixation and includes a retrospective analysis of patients treated with this modified approach over a three-year period. In this study, 25 patients with pelvic ring and acetabular fractures underwent percutaneous screw fixation. The cohort, predominantly male (23 out of 25), had an average age of 38years. The majority of injuries were due to traffic accidents (18 out of 25). Types of injuries included pelvic ring (6 cases), acetabular fractures (8 cases), and combined injuries (11 cases). Various screw types, including antegrade and retrograde anterior column screws, retrograde posterior column screws, and lateral compression screws, were used, tailored to each case. Over an average follow-up of 18months, there were no additional procedures or complications, such as neurovascular injury or hardware failure, indicating successful outcomes in all cases. This study introduces a simple yet effective method to address guidewire misdirection during percutaneous fixation for pelvic and acetabular fractures, offering enhanced precision and potentially better patient outcomes. Further research with a larger patient cohort is required for a more comprehensive understanding of its efficacy compared to traditional methods. IV. Therapeutic Study (Surgical technique and Cases-series).

Comparative study of percutaneous transfacet screw and pedicle screw in oblique lumbar interbody fusion for the treatment of single-level lumbar spinal stenosis

Objective: To conduct a comparative study of radiological and clinical outcomes between percutaneous transfacet screw (TFS) and pedicle screw (BPS) in oblique lateral lumbar interbody fusion (OLIF) for single-level lumbar spinal stenosis. Methods: A retrospective cohort study. Patients who underwent OLIF with TFS or BPS for the treatment of single-level lumbar spinal stenosis at Beijing Jishuitan Hospital from January 2019 to June 2022 were retrospectively analyzed. Radiological parameters and clinical indicators were compared between the two groups. Radiological parameters included preoperative, immediate postoperative (within 5 days), and 1-year postoperative measurements of disc height and segmental lordosis angle, as well as interbody fusion status at 1 year postoperatively. Clinical indicators included operative time, blood loss, length of hospital stay, complications, and Oswestry Disability Index (ODI), visual analogue scale (VAS) scores for back pain, and leg pain before and 1 year after surgery. Results: Four male and 10 female patients with an average age of (61.0±11.2) years underwent OLIF with TFS, while 9 male and 12 female patients underwent OLIF with BPS, with a mean age of (60.9±6.7) years. There was no statistically significant difference in preoperative disc height between the TFS and BPS groups (P>0.05). The immediate postoperative disc height was (12.9±2.1) mm and it was (10.4±1.7) mm at 1-year follow-up in the TFS group; in the BPS group, it was (12.9±2.1) mm immediately postoperatively and (11.9±2.1) mm at 1-year follow-up; there was statistically significant difference between the two groups at 1-year follow-up (P=0.037). The segmental lordosis angle showed no significant differences within each group or between the two groups at preoperative, immediate postoperative, or 1-year postoperative follow-up (all P>0.05). At 1-year postoperative follow-up, the fusion rates was 92.9%(13/14) in the TFS group and 95.2%(20/21) in the BPS group, with no statistically significant difference between the two groups (P>0.05). The TFS group had a significantly shorter operative time and less blood loss compared to the BPS group [(164.3±33.9) minutes vs (191.7±31.8) minutes and (74.3±46.9) ml vs (124.8±54.0) ml, respectively] (both P<0.05). Both groups showed significant improvement in ODI and VAS scores at 1 year postoperatively compared to those preoperatively, but with no statistically significant difference was found between the groups (both P>0.05). Conclusions: OLIF with TFS fixation can effectively restore disc height and alleviate back and leg pain in patients with single-level lumbar spinal stenosis. Compared to the OLIF with BPS procedure, OLIF with TFS has shorter operative time and less blood loss.

Navigation versus fluoroscopy in minimalinvasive iliosacral screw placement

IntroductionWhen needed operative treatment of sacral fractures is mostly performed with percutaneous iliosacral screw fixation. The advantage of navigation in insertion of pedicle screws already could be shown by former investigations. The aim of this investigation was now to analyze which influence iliosacral screw placement guided by navigation has on duration of surgery, radiation exposure and accuracy of screw placement compared to the technique guided by fluoroscopy.Methods68 Consecutive patients with sacral fractures who have been treated by iliosacral screws were inclouded. Overall, 85 screws have been implanted in these patients. Beside of demographic data the duration of surgery, duration of radiation, dose of radiation and accuracy of screw placement were analyzed.ResultsWhen iliosacral screw placement was guided by navigation instead of fluoroscopy the dose of radiation per inserted screw (155.0 cGy*cm2 vs. 469.4 cGy*cm2p < 0.0001) as well as the duration of radiation use (84.8 s vs. 147.5 s p < 0.0001) were significantly lower. The use of navigation lead to a significant reduction of duration of surgery (39.0 min vs. 60.1 min p < 0.01). The placement of the screws showed a significantly higher accuracy when performed by navigation (0 misplaced screws vs 6 misplaced screws—p < 0.0001).ConclusionBased on these results minimal invasive iliosacral screw placement guided by navigation seems to be a safe procedure, which leads to a reduced exposure to radiation for the patient and the surgeon, a reduced duration of surgery as well as a higher accuracy of screw placement.

Comparison of closed percutaneous screw reduction versus open reduction and internal fixation in the treatment of frontal sinus fractures: A retrospective study

The aim of this study was to compare closed percutaneous screw reduction to traditional open reduction-internal fixation (OR-IF) for the treatment of anterior table fractures. Both groups were evaluated in terms of operative variables, complications, and treatment success. Of 32 patients included, 19 patients underwent OR-IF, while 13 underwent percutaneous screw reduction. The median operative time, length of hospital stays, and treatment cost of the OR-IF group were 100 min (range 60-130), 4 days (range 3-9), and $727 (range $642-$1291), respectively. The same variables for the closed reduction group were 30 min (range 20-40), 2 days (range 1-2), and $303 (range $252-$349), respectively. The closed reduction group exhibited a shorter operative time (p< 0.001), reduced length of hospital stays (p< 0.001), lower treatment cost (p< 0.001), and a lower complication rate (p = 0.025) compared to the OR-IF group. Late-term outcomes in both groups showed no visible contour changes or step deformities. In conclusion, the percutaneous screw reduction technique is a safe and effective option with minimal morbidity in the treatment of frontal sinus anterior table fractures. Therefore, traditional OR-IF should be reserved for fractures that are not suitable for reduction using minimally invasive techniques.