Peptide Materials Research Articles

N-Acetylation of Biodegradable Supramolecular Peptide Nanofilaments Selectively Enhances Their Proteolytic Stability for Targeted Delivery of Gold-Based Anticancer Agents.

Peptide materials are promising for various biomedical applications; however, a significant concern is their lack of stability and rapid degradation in vivo due to non-specific proteolysis. For materials specifically designed to respond to disease-specific proteases, it would be desirable to retain high susceptibility to target proteases while minimizing the impact of non-specific proteolysis. We describe N-terminal acetylation as a simple synthetic modification of amphiphilic self-assembling peptides that contain an MMP-9-cleavable segment and form soluble, nanoscale filaments. We found that the N-terminus capping of these peptides did not significantly impact their self-assembly behavior, critical aggregation concentration, or ability to encapsulate hydrophobic payloads. By contrast, their proteolytic stability in human plasma (especially for anionic peptide sequences) was considerably increased while susceptibility to hydrolysis by MMP-9 was retained when compared to non-acetylated peptides, especially during the first 12 h. We note, however, that due to the longer time scale required for in vitro studies (72 h), non-specific proteolysis of both anionic acetylated peptides leads to similar activity in vitro despite differing MMP-9 kinetics during the early stages. Overall, the enhanced stability against non-specific proteases, combined with the ability of these nanofilaments to enhance the effectiveness of gold-based drugs toward cancerous cells compared to healthy cells, brings these acetylated peptide filaments a step closer toward clinical translation.

Compositional changes in the humin fraction resulting from the long-term cultivation of an Irish grassland soil: Evidence from FTIR and multi-NMR spectroscopies

Soil humin (HN), a major long-term sink for carbon in the pedosphere, plays a key role in the global carbon cycle, and has been less extensively studied than the humic and fulvic acids components. There are increasing concerns about the depletions of soil organic matter (SOM) arising from modern soil cultivation practices but there has been little focus on how HN can be altered as the result. This study has compared the HN components in a soil under cultivation for wheat for >30 years with those from an adjacent contiguous soil that had been under long-term grass for all that time. A urea-fortified basic solution isolated additional humic fractions from soils that had been exhaustively extracted in basic media. Then further exhaustive extractions of the residual soil material with dimethyl sulfoxide, amended with sulphuric acid isolated what may be called the “true” HN fraction. The long-term cultivation resulted in a loss of 53 % soil organic carbon in the surface soil. Infrared and multi-NMR spectroscopies showed the “true” HN to be dominated by aliphatic hydrocarbons and carboxylated structures, but with clear evidence for lesser amounts of carbohydrate and peptide materials, and with weaker evidence for lignin-derived substances. These lesser-amount structures can be sorbed on the soil mineral colloid surfaces and/or covered by the hydrophobic HN component or entrained within these which have strong affinities for the mineral colloids. HN from the cultivated site contained less carbohydrate and more carboxyl groups suggesting slow transformations took place resulting from the cultivation, but these were much slower than for the other components of SOM. It is recommended that a study be made of the HN in a soil under long-term cultivation for which the SOM content has reached a steady state and where HN will be expected to dominate the components of SOM.

Thermally‐controlled spherical peptide gel architectures prepared using the pH switch method

AbstractSelf‐assembling nanostructured peptide gels are promising materials for sensing, drug delivery, and energy harvesting. Of particular interest are short diphenylalanine (FF) peptides modified with 9‐fluorenylmethyloxycarbonyl (Fmoc), which promotes the association of the peptide building blocks. Fmoc‐FF gels generally form fibrous networks and while other structures have been demonstrated, further control of the gelation and resulting ordered three‐dimensional structures potentially offers new possibilities in tissue engineering, sensing, and drug release applications. Herein, we report that the structure tunability of Fmoc‐FF gels can be achieved by controlling the water content and the temperature. We further explore the incorporation of metal nanoparticles in the formation of the gel to enable optical sensing applications based on hybrid Fmoc‐FF‐nanoparticle microspheres. Finally, fluorescence lifetime imaging microscopy reveals a correlation between lifetime and reduced bandgap, in support of a semiconductor‐induced charge transfer mechanism that might also increase the stability of an excited state of a probe molecule. The observations potentially further widen the use of these peptide materials in bioimaging and sensing applications.

Modulation of Mechanical Properties of Short Bioinspired Peptide Materials by Single Amino-Acid Mutations.

The occurrence of modular peptide repeats in load-bearing (structural) proteins is common in nature, with distinctive peptide sequences that often remain conserved across different phylogenetic lineages. These highly conserved peptide sequences endow specific mechanical properties to the material, such as toughness or elasticity. Here, using bioinformatic tools and phylogenetic analysis, we have identified the GX8 peptide with the sequence GLYGGYGX (where X can be any residue) in a wide range of organisms. By simple mutation of the X residue, we demonstrate that GX8 can be self-assembled into various supramolecular structures, exhibiting vastly different physicochemical and viscoelastic properties, from liquid-like coacervate microdroplets to hydrogels to stiff solid materials. A combination of spectroscopic, electron microscopy, mechanical, and molecular dynamics studies is employed to obtain insights into molecular scale interactions driving self-assembly of GX8 peptides, underscoring that π-π stacking and hydrophobic interactions are the drivers of peptide self-assembly, whereas the X residue determines the extent of hydrogen bonding that regulates the macroscopic mechanical response. This study highlights the ability of single amino-acid polymorphism to tune the supramolecular assembly and bulk material properties of GX8 peptides, enabling us to cover a broad range of potential biomedical applications such as hydrogels for tissue engineering or coacervates for drug delivery.

Two-Dimensional Peptide Assembly via Arene-Perfluoroarene Interactions for Proliferation and Differentiation of Myoblasts.

Supramolecular assembly based on aromatic interactions can provide well-defined nanostructures with an understanding of intermolecular interactions at the molecular level. The peptide assembly via a supramolecular approach can overcome the inherent limitations of bioactive peptides, such as proteolytic degradations and rapid internalizations into the cytosol. Although extensive research has been carried out on supramolecular peptide materials with a two-dimensional (2D) structure, more needs to be reported on biological activity studies using well-defined 2D peptide materials. Physical and chemical properties of the 2D peptide assembly attributed to their large surface area and flexibility can show low cytotoxicity, enhanced molecular loading, and higher bioconjugation efficiency in biological applications. Here, we report supramolecular 2D materials based on the pyrene-grafted amphiphilic peptide, which contains a peptide sequence (Asp-Gly-Glu-Ala; DGEA) that is reported to bind to the integrin α2β1 receptor in 2D cell membranes. The addition of octafluoronaphthalene (OFN) to the pyrene-grafted peptide could induce a well-ordered 2D assembly by face-centered arene-perfluoroarene stacking. The DGEA-peptide 2D assembly with a flat structure, structural stability against enzymatic degradations, and a larger size can enhance the proliferation and differentiation of muscle cells via continuous interactions with cell membrane receptors integrin α2β1 showing a low intracellular uptake (15%) compared to that (62%) of the vesicular peptide assembly. These supramolecular approaches via the arene-perfluoroarene interaction provide a strategy to fabricate well-defined 2D peptide materials with an understanding of assembly at the molecular level for the next-generation peptide materials.

PH dependence of the assembly mechanism and properties of poly(L-lysine) and poly(L-glutamic acid) complexes.

We show by extensive experimental characterization combined with molecular simulations that pH has a major impact on the assembly mechanism and properties of poly(L-lysine) (PLL) and poly(L-glutamic acid) (PGA) complexes. A combination of dynamic light scattering (DLS) and laser Doppler velocimetry (LDV) is used to assess the complexation, charge state, and other physical characteristics of the complexes, isothermal titration calorimetry (ITC) is used to examine the complexation thermodynamics, and circular dichroism (CD) is used to extract the polypeptides' secondary structure. For enhanced analysis and interpretation of the data, analytical ultracentrifugation (AUC) is used to define the precise molecular weights and solution association of the peptides. Molecular dynamics simulations reveal the associated intra- and intermolecular binding changes in terms of intrinsic vs. extrinsic charge compensation, the role of hydrogen bonding, and secondary structure changes, aiding in the interpretation of the experimental data. We combine the data to reveal the pH dependency of PLL/PGA complexation and the associated molecular level mechanisms. This work shows that not only pH provides a means to control complex formation but also that the associated changes in the secondary structure and binding conformation can be systematically used to control materials assembly. This gives access to rational design of peptide materials via pH control.

An adhesive peptide specifically induces microtubule condensation.

Cell function-associated biomolecular condensation has great potential in modulation of molecular activities. We develop a microtubule-trapping peptide that first self-assembles into nanoparticles and then in situ transforms into nanofibers via ligand-receptor interactions when targeted to tubulin. The nanofibers support the increased exposed targets for further adhering to microtubules and induce the self-assembly of microtubules into networks due to multivalent effects. Microtubule condensation with prolonged retention in cells for up to 24 h, which is 6 times longer than that of the non-transformable nanoparticle group, efficiently induces in vitro cell apoptosis and inhibits in vivo tumour growth. These smart transformable peptide materials for targeted protein condensation have the potential for improving retention and inducing cell apoptosis in tumour therapy.

Machine learning overcomes human bias in the discovery of self-assembling peptides.

Peptide materials have a wide array of functions, from tissue engineering and surface coatings to catalysis and sensing. Tuning the sequence of amino acids that comprise the peptide modulates peptide functionality, but a small increase in sequence length leads to a dramatic increase in the number of peptide candidates. Traditionally, peptide design is guided by human expertise and intuition and typically yields fewer than ten peptides per study, but these approaches are not easily scalable and are susceptible to human bias. Here we introduce a machine learning workflow-AI-expert-that combines Monte Carlo tree search and random forest with molecular dynamics simulations to develop a fully autonomous computational search engine to discover peptide sequences with high potential for self-assembly. We demonstrate the efficacy of the AI-expert to efficiently search large spaces of tripeptides and pentapeptides. The predictability of AI-expert performs on par or better than our human experts and suggests several non-intuitive sequences with high self-assembly propensity, outlining its potential to overcome human bias and accelerate peptide discovery.

Less is More: Preorganization Leads to Better Tumor Retention and Therapeutic Efficacy

AbstractProtein preorganization is ubiquitous in nature and enables subtle structural rearrangements and precise function executions, making it an attractive approach for generating functional peptide materials. Here, a phosphorylation‐dependent pre‐organization approach to optimize the therapeutic outcomes of a self‐assembling peptide targeting programmed cell death ligand 1 (PD‐L1) is reported. Upon incorporating the imaging probe cyanine 5.5 (Cy5.5) and therapeutic drug 10‐hydroxycamptothecin (HCPT), three phosphorylated precursors (1P, 2P, and 3P) containing identical peptide sequences with different tyrosine phosphorylation sites are constructed. The presence of a phosphate group can stabilize the self‐assembling peptide in a well‐defined, preorganized state. Moreover, variations in the phosphorylation sites lead to different preorganized secondary structures, dephosphorylation rates, and PD‐L1 binding affinities. Responding to alkaline phosphatase dephosphorylation, subtle structural transformation to more ordered states, an increase in binding affinity against PD‐L1, and rapid cellular internalization are observed. Compared with the unphosphorylated control (0P), the preorganization of 1P, 2P, and 3P can optimize tumor retention and resultant therapeutic performance, of which 3P maximizes the final therapeutic outcomes, leading to a 70.3% tumor inhibition rate. This study highlights the great potential to control the subtle structural transformation and therapeutic effects of self‐assembling peptides by preparing their preorganized entities.

Fluorinated Protein and Peptide Materials for Biomedical Applications.

Fluorination represents one of the most powerful modern design strategies to impart biomacromolecules with unique functionality, empowering them for widespread application in the biomedical realm. However, the properties of fluorinated protein materials remain unpredictable due to the heavy context-dependency of the surrounding atoms influenced by fluorine’s strong electron-withdrawing tendencies. This review aims to discern patterns and elucidate design principles governing the biochemical synthesis and rational installation of fluorine into protein and peptide sequences for diverse biomedical applications. Several case studies are presented to deconvolute the overgeneralized fluorous stabilization effect and critically examine the duplicitous nature of the resultant enhanced chemical and thermostability as it applies to use as biomimetic therapeutics, drug delivery vehicles, and bioimaging modalities.

Self-assembling Peptides with Internal Ionizable Unnatural Amino Acids: A General Approach to pH-responsive Peptide Materials.

Self-assembled peptides are an emerging family of biomaterials that show great promise for a range of biomedical and biotechnological applications. Introducing and tuning the pH-responsiveness of the assembly is highly desirable for improving their biological activities. Inspired by proteins with internal ionizable residues, we report a simple but effective approach to constructing pH-responsive peptide assembly containing unnatural ionic amino acids with an aliphatic tertiary amine side chain. Through a combined experimental and computational investigation, we demonstrate that these residues can be accommodated and stabilized within the internal hydrophobic compartment of the peptide assembly. The hydrophobic microenvironment shifts their pKa significantly from a basic pH typically found for free amines to a more biologically relevant pH in the weakly acidic range. The pH-induced ionization and ionization-dependent self-assembly and disassembly are thoroughly investigated and correlated with the biological activity of the assembly. This new approach has unique advantages in tuning the pH-responsiveness of self-assembled peptides across a large pH range in a complex biological environment. We anticipate the ionizable amino acids developed here can be widely applicable to the synthesis and self-assembly of many amphiphilic peptides with endowed pH-responsive properties to enhance their biological activities toward applications ranging from targeted therapeutic delivery to proton transport.

In vitro and in vivo Evaluation of the Bioactive Nanofibers-Encapsulated Benzalkonium Bromide for Accelerating Wound Repair with MRSA Skin Infection.

PurposeDeveloping the ideal drug or dressing is a serious challenge to controlling the occurrence of antibacterial infection during wound healing. Thus, it is important to prepare novel nanofibers for a wound dressing that can control bacterial infections. In our study, the novel self-assembled nanofibers of benzalkonium bromide with bioactive peptide materials of IKVAV and RGD were designed and fabricated.MethodsDifferent drug concentration effects of encapsulation efficacy, swelling ratio and strength were determined. Its release profile in simulated wound fluid and its cytotoxicity were studied in vitro. Importantly, the antibacterial efficacy, inhibition of biofilm formation effect and wound healing against MRSA infections in vitro and in vivo were performed after observing the tissue toxicity in vivo.ResultsIt was found that the optimized drug load (0.8%) was affected by the encapsulation efficacy, swelling ratio, and strength. In addition, the novel nanofibers with average diameter (222.0 nm) and stabile zeta potential (−11.2 mV) have good morphology and characteristics. It has a delayed released profile in the simulated wound fluid and good biocompatibility with L929 cells and most tissues. Importantly, the nanofibers were shown to improve antibacterial efficacy, inhibit biofilm formation, and lead to accelerated wound healing following infection with methicillin-resistant Staphylococcus aureus.ConclusionThese data suggest that novel nanofibers could effectively shorten the wound-healing time by inhibiting biofilm formation, which make it promising candidates for treatment of MRSA-induced wound infections.

Peptide Materials in Dye Sensitized Solar Cells

In September 2015, the ONU approved the Global Agenda for Sustainable Development, by which all countries of the world are mobilized to adopt a set of goals to be achieved by 2030. Within these goals, the aim of having a responsible production and consumption, as well as taking climate action, made is necessary to design new eco-friendly materials. Another important UN goal is the possibility for all the countries in the world to access affordable energy. The most promising and renewable energy source is solar energy. Current solar cells use non-biodegradable substrates, which generally contribute to environmental pollution at the end of their life cycles. Therefore, the production of green and biodegradable electronic devices is a great challenge, prompted by the need to find sustainable alternatives to the current materials, particularly in the field of dye-sensitized solar cells. Within the green alternatives, biopolymers extracted from biomass, such as polysaccharides and proteins, represent the most promising materials in view of a circular economy perspective. In particular, peptides, due to their stability, good self-assembly properties, and ease of functionalization, may be good candidates for the creation of dye sensitized solar cell (DSSC) technology. This work shows an overview of the use of peptides in DSSC. Peptides, due to their unique self-assembling properties, have been used both as dyes (mimicking natural photosynthesis) and as templating materials for TiO2 morphology. We are just at the beginning of the exploitation of these promising biomolecules, and a great deal of work remains to be done.

Detection of Proton Carriers in Tyrosine-Rich Peptide Thin Film

Traditional Von Neumann structure, where memory and computational units are separated, is now facing significant difficulties in terms of power consumption and computing speed in big data era. Therefore, human brain-like computing architecture is now paid attention in research field owing to its high parallelism, fault tolerance and robustness1-2. In this biological system, synaptic weight which plays crucial role in memory and learning is modulated by ionic species, especially protons transmitted between synapses. Here, we focused on short length peptide Y7C (YYACAYY) thin film which induces proton coupled electron transfer (PCET) due to its Tyrosine-rich structure. The Y7C film has shown an interesting behavior in which electrical conductivity varies with humidity3-4. By this modulation, bimodal memristor using both of voltage and humidity5 input and synaptic transistor which shows dynamic reponses through humidity have been demonstrated, but direct relation between current and proton conduction is still ambiguous. Therefore, we measured transient current flow between Pd and Au electrode and detected proton conduction of Y7C film.In previous studies, voltage & humidity controlled Y7C bimodal memristor has been reported. However, since the current regulation through humidity showed insufficient response than that through voltage, a definite relationship between moisture and current needs to be defined. To achieve that, thin film of the peptide material dissolved in Trifluoroacetic acid (TFA) 99% solution was spin coated on SiO2/Si substrate. By measuring the transient current of the Y7C film, presence of temporary charge carriers was observed. Also, the electrical impedance spectroscopy (EIS) of peptide layer showed a semicircle and a nonvertical tail, which indicate ionic conduction through the film. Lastly, film characterization of Y7C thin layer unveiled that the corresponding ions are protons as originally targeted. This research has showed principles of peptide thin film’s current increment driven by both of humidity and voltage through electrochemical reaction. Fig.1. Transient charge flowing through Y7C thin film measured in various atmospheric conditions and electrodes Acknowledgment This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. 2020R1A2C2004864). References Pakkenberg B, Pelvig D, Marner L, Bundgaard M J, Gundersen H J G, Nyengaard J R and Regeur L 2003 Exp. Gerontol. 38 95Abbott L F and Nelson S B 2000 Nat. Neurosci. 3 1178Lee, Jaehun, et al. "Proton conduction in a tyrosine‐rich peptide/manganese oxide hybrid nanofilm." Advanced Functional Materials 27.35 (2017): 1702185.Sung, Taehoon, et al. "Effects of proton conduction on dielectric properties of peptides." RSC advances 8.59 (2018): 34047-34055.Song, Min-Kyu, et al. "Proton-enabled activation of peptide materials for biological bimodal memory." Nature Communications 11.1 (2020): 1-8. Figure 1

Designer self-assembling peptide nanofibers induce biomineralization of lidocaine for slow-release and prolonged analgesia

The burst release of small molecular water-soluble drugs is a major problem when pursuing their long-acting formulations. Although various types of carrier materials have been developed for tackling this problem, it is still a big challenge to prevent water-soluble small molecules from fast release and diffusion. In this study, a biomineralization strategy based upon a self-assembling peptide is proposed for the slow release of lidocaine, a classic anesthetic with high solubility and a very small molecular weight. A bolaamphiphilic peptide was designed to self-assemble and produce negatively charged nanofibers, which were used as the template to absorb positively charged lidocaine molecules through an electrostatic interaction. The biomineralization of lidocaine was then induced by adjusting the pH, which lead to the formation of lidocaine microcrystals with a homogenous size. The microcrystals were incorporated into a hyaluronic acid hydrogel to form an injectable formulation. This formulation slowly released lidocaine and generate a prolonged anesthetic and analgesic effect in rodent models. Due to the constrained local and plasma lidocaine concentration, as well as the biocompatibility and biodegradability of the peptide materials, this formulation also showed considerable safety. These results suggest that nanofiber assisted biomineralization can provide a potential strategy for the fabrication of long-acting formulations for small molecular water-soluble drugs. Statement of significanceLong-acting formulations are highly pursued to achieve stronger therapeutic effect, or to avoid repeated administration of drugs, especially through painful injection. Using carrier materials to slow down the release of bioactive molecules is a common strategy to reach this goal. However, for many water-soluble small molecular drugs currently used in clinic, it is notoriously difficult to slow down their release and diffusion. This study proposes a novel strategy based on a controllable mineralization process using self-assembling peptide nanofibers as the template. Taking lidocaine as an example, we showed how peptide-drug microcrystals with well-controlled size and shape could be obtained, which exhibit significantly prolonged anesthetic and analgesic effect. As a proof-of-concept study, this work proposes a promising strategy to control the release of water-soluble small molecular drugs.

Investigating the effects of N-terminal acetylation on KFE8 self-assembly with 2D IR spectroscopy

Peptide self-assembly is an exciting and robust approach to create novel nanoscale materials for biomedical applications. However, the complex interplay between intra- and intermolecular interactions in peptide aggregation means that minor changes in peptide sequence can yield dramatic changes in supramolecular structure. Here, we use two-dimensional infrared spectroscopy to study a model amphiphilic peptide, KFE8, and its N-terminal acetylated counterpart, AcKFE8. Two-dimensional infrared spectra of isotope-labeled peptides reveal that AcKFE8 aggregates comprise two distinct β-sheet structures although KFE8 aggregates comprise only one of these structures. Using an excitonic Hamiltonian to simulate the vibrational spectra of model β-sheets, we determine that the spectra are consistent with antiparallel β-sheets with different strand alignments, specifically a two-residue shift in the register of the β-strands. These findings bring forth new insights into how N-terminal acetylation may subtly impact secondary structure, leading to larger effects on overall aggregate morphology. In addition, these results highlight the importance of understanding the residue-level structural differences that result from changes in peptide sequence to facilitate the rational design of peptide materials.

Peptide-based bioactivated in vivo assembly nanomaterials and its biomedical applications: a review

Based on the self-assembly process occurring in the human body all the time, self-assembled nanomaterials were designed by the researchers. The self-assembled nanomaterials have controllability, biocompatibility and functional advantages in vivo. The self-assembled nanomaterials constructed in situ under a physiological environment display various biological characteristics which can be used for imaging, therapy, and broad clinical applications. In situ self-assembled nanomaterials can boost drug function, reduce toxic and side effects, prolong imaging time and enlarge signal-to-noise ratio. By using pathological conditions to trigger specific responses in vivo, well-ordered nanoaggregates can be spontaneously formed by multiple weak bonding interactions. The assembly shows higher accumulation and longer retention in situ. Endogenous triggers for in situ assembly, such as enzymes, pH, reactive oxygen species and ligand receptor interaction, can be used to transform the materials into a variety of controllable nanostructures including nanoparticles, nanofibers and gels through bioactivated in vivo assembly (BIVA) strategies. BIVA strategies can be applied for treatment, imaging or participate in the physiological activities of cells at the lesion site. This review summarized and prospected the design of self-assembled peptide materials based on BIVA technology and their biomedical applications. The nanostructures of the self-assembly enable some beneficial biological effects, such as assembly induced retention (AIR) effect, enhanced targeting effect, multivalent bond effect, and membrane disturbance. Thus, the BIVA nanotechnology is promising for efficient drug delivery, enhancement of targeting and treatment, as well as optimization of the biological distribution of drugs.

The Potential of Modified and Multimeric Antimicrobial Peptide Materials as Superbug Killers.

Antimicrobial peptides (AMPs) are found in nearly all living organisms, show broad spectrum antibacterial activity, and can modulate the immune system. Furthermore, they have a very low level of resistance induction in bacteria, which makes them an ideal target for drug development and for targeting multi-drug resistant bacteria ‘Superbugs’. Despite this promise, AMP therapeutic use is hampered as typically they are toxic to mammalian cells, less active under physiological conditions and are susceptible to proteolytic degradation. Research has focused on addressing these limitations by modifying natural AMP sequences by including e.g., d-amino acids and N-terminal and amino acid side chain modifications to alter structure, hydrophobicity, amphipathicity, and charge of the AMP to improve antimicrobial activity and specificity and at the same time reduce mammalian cell toxicity. Recently, multimerisation (dimers, oligomer conjugates, dendrimers, polymers and self-assembly) of natural and modified AMPs has further been used to address these limitations and has created compounds that have improved activity and biocompatibility compared to their linear counterparts. This review investigates how modifying and multimerising AMPs impacts their activity against bacteria in planktonic and biofilm states of growth.

De novo designed peptides form a highly catalytic ordered nanoarchitecture on a graphite surface.

Here we demonstrate that short peptides, de novo designed from first principles, self-assemble on the surface of graphite to produce a highly robust and catalytic nanoarchitecture, which promotes peroxidation reactions with activities that rival those of natural enzymes in both single and multi-substrate reactions. These designable peptides recapitulate the symmetry of the underlying graphite surface and act as molecular scaffolds to immobilize hemin molecules on the electrode in a hierarchical self-assembly manner. The highly ordered and uniform hybrid graphite–peptide–hemin nanoarchitecture shows the highest faradaic efficiency of any hybrid electrode reported. Given the explosive growth of the types of chemical reactions promoted by self-assembled peptide materials, this new approach to creating complex electrocatalytic assemblies will yield highly efficient and practically applicable electrocatalysts.

Recent advances in coiled-coil peptide materials and their biomedical applications.

Extensive research has gone into deciphering the sequence requirements for peptides to fold into coiled-coils of varying oligomeric states. More recently, additional signals have been introduced within coiled-coils to promote higher order assembly into biomaterials with a rich distribution of morphologies. Herein we describe these strategies for association of coiled-coil building blocks and biomedical applications. With many of the systems described herein having proven use in protein storage, cargo binding and delivery, three dimensional cell culturing and vaccine development, the future potential of coiled-coil materials to have significant biomedical impact is highly promising.