Particulate Adjuvants Research Articles

Water-Soluble and Freezable Aluminum Salt Vaccine Adjuvant.

Particulate aluminum salts have long occupied a central place worldwide as inexpensive immunostimulatory adjuvants that enable induction of protective immunity for vaccines. Despite their huge benefits and safety, the particulate structures of aluminum salts require transportation and storage at temperatures between 2 °C and 8 °C, and they all have exquisite sensitivity to damage caused by freezing. Here, we propose to solve the critical freezing vulnerability of particulate aluminum salt adjuvants by introducing soluble aluminum salts as adjuvants. The solubility properties of fresh and frozen aluminum chloride and aluminum triacetate, each buffered optimally with sodium acetate, were demonstrated with visual observations and with UV-vis scattering analyses. Two proteins, A244 gp120 and CRM197, adjuvanted either with soluble aluminum chloride or soluble aluminum triacetate, each buffered by sodium acetate at pH 6.5-7.4, elicited murine immune responses that were equivalent to those obtained with Alhydrogel®, a commercial particulate aluminum hydroxide adjuvant. The discovery of the adjuvanticity of soluble aluminum salts might require the creation of a new adjuvant mechanism for aluminum salts in general. However, soluble aluminum salts might provide a practical substitute for particulate aluminum salts as vaccine adjuvants, thereby avoiding the risk of inactivation of vaccines due to accidental freezing of aluminum salt particles.

Intradermal Vaccination with PLGA Nanoparticles via Dissolving Microneedles and Classical Injection Needles

PurposeA dissolving microneedle array (dMNA) is a vaccine delivery device with several advantages over conventional needles. By incorporating particulate adjuvants in the form of poly(D,L-lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) into the dMNA, the immune response against the antigen might be enhanced. This study aimed to prepare PLGA-NP-loaded dMNA and to compare T-cell responses induced by either intradermally injected aqueous-PLGA-NP formulation or PLGA-NP-loaded dMNA in mice.MethodsPLGA NPs were prepared with microfluidics, and their physicochemical characteristics with regard to encapsulation efficiencies of ovalbumin (OVA) and CpG oligonucleotide (CpG), zeta potentials, polydispersity indexes, and sizes were analysed. PLGA NPs incorporated dMNA was produced with three different dMNA formulations by using the centrifugation method, and the integrity of PLGA NPs in dMNAs was evaluated. The immunogenicity was evaluated in mice by comparing the T-cell responses induced by dMNA and aqueous formulations containing ovalbumin and CpG (OVA/CpG) with and without PLGA NP.ResultsPrepared PLGA NPs had a size of around 100 nm. The dMNA formulations affected the particle integrity, and the dMNA with poly(vinyl alcohol) (PVA) showed almost no aggregation of PLGA NPs. The PLGA:PVA weight ratio of 1:9 resulted in 100% of penetration efficiency and the fastest dissolution in ex-vivo human skin (< 30 min). The aqueous formulation with soluble OVA/CpG and the aqueous-PLGA-NP formulation with OVA/CpG induced the highest CD4 + T-cell responses in blood and spleen cells.ConclusionsPLGA NPs incorporated dMNA was successfully fabricated and the aqueous formulation containing PLGA NPs induce superior CD4+ and CD8+ T-cell responses.

Rational design of polymer-based particulate vaccine adjuvants.

Vaccination is considered one of the major milestones in modern medicine, facilitating the control and eradication of life-threatening infectious diseases. Vaccine adjuvants are a key component of many vaccines, serving to steer antigen-specific immune responses and increase their magnitude. Despite major advances in the field of adjuvant research over recent decades, our understanding of their mechanism of action remains incomplete. This hinders our capacity to further improve these adjuvant technologies, so addressing how adjuvants induce and control the induction of innate and adaptive immunity is a priority. Investigating how adjuvant physicochemical properties, such as size and charge, exert immunomodulatory effects can provide valuable insights and serve as the foundation for the rational design of vaccine adjuvants. Most clinically applied adjuvants are particulate in nature and polymeric particulate adjuvants present advantages due to stability, biocompatibility profiles, and flexibility in terms of formulation. These properties can impact on antigen release kinetics and biodistribution, cellular uptake and targeting, and drainage to the lymphatics, consequently dictating the induction of innate, cellular, and humoral adaptive immunity. A current focus is to apply rational design principles to the development of adjuvants capable of eliciting robust cellular immune responses including CD8+ cytotoxic T-cell and Th1-biased CD4+ T-cell responses, which are required for vaccines against intracellular pathogens and cancer. This review highlights recent advances in our understanding of how particulate adjuvants, especially polymer-based particulates, modulate immune responses and how this can be used as a guide for improved adjuvant design.

In vivo evaluation of new adjuvant systems based on combination of Salmonella Typhi porins with particulate systems: Liposomes versus polymeric particles

Subunit vaccines that have weak immunogenic activity require adjuvant systems for enhancedcellular and long-acting humoral immune responses. Both lipid-based and polymeric-based particulate adjuvants have been widely investigated to induce the desired immune responses against the subunit vaccines. The adjuvant efficacy of these particulate adjuvants depends upon their physicochemical properties such as particle size, surface charge, shape and their composition. Previously, we showed in vitro effect of adjuvant systems based on combination of chitosan and Salmonella Typhi porins in microparticle or nanoparticle form, which were spherical with positive surface charge. In the present study, we have further developed an adjuvant system based on combination of porins with liposomes (cationic and neutral) and investigated the adjuvant effect of both the liposomal and polymeric systems in BALB/c mice using a model antigen, ovalbumin. Humoral immune responses were determined following priming and booster dose at 15-day intervals. In overall, IgM and IgG levels were induced in the presence of both the liposomal and polymeric adjuvant systems indicating the positive impact of combination with porins. The highest IgM levels were obtained on Day 8, and liposomal adjuvant systems were found to elicit significantly higher IgM levels compared to polymeric systems. IgG levels were increased significantly after booster, particularly more profound with the micro-sized polymeric system when compared to cationic liposomal system with nano-size. Our results demonstrated that the developed particulate systems are promising both as an adjuvant and delivery system, providing enhanced immune responses against subunit antigens, and have the potential for long-term protection.

Inducing innate immune responses with particulate adjuvants

Inducing innate immune responses with particulate adjuvants

Size matters in non-canonical inflammasome activation and cell-mediated immunity

Particulate adjuvants are key components of many approved vaccines, but their mechanism of adjuvanticity is debated. Muñoz-Wolf etal.1 find that 50-nm particles maximize cell-mediated immune responses by activating the caspase-11 inflammasome, providing mechanistic insight to particulate adjuvant technologies.

Particulate and non-particle adjuvants in Leishmaniasis vaccine designs: A review.

Leishmaniasis is a parasitic disease with different clinical forms caused by protozoan parasites of the genus Leishmania and transmitted by the bite of an infected female sandfly. According to the World Health Organization (WHO), it is the second most common parasitic disease after malaria and it is known that approximately 350 million people are at risk. The disease manifests itself in different clinical forms. In addition to asymptomatic cases, cutaneous leishmaniasis (CL), which creates large lesions on the skin, and visceral leishmaniasis (VL), which causes death if not treated, especially affecting the abdominal organs, are two important clinical forms. When the studies were examined, it was seen that a clinically used vaccine against any form of human leishmaniasis has not been developed yet. In some studies, it was stated that the lack of appropriate adjuvant was responsible for the failure to develop an effective Leishmania vaccine. We can say that strong adjuvants are needed to achieve successful vaccines. In this article, adjuvants and adjuvant candidates used in vaccine studies against leishmaniasis are discussed.

Mucosal Adjuvants Delivered by a Mucoadhesive Patch for Sublingual Administration of Subunit Vaccines.

Among mucosal administration routes for vaccines, the sublingual route has been proven capable of inducing a potent systemic and mucosal immune response. However, the absence of a simple and compliant delivery system and the lack of robust mucosal adjuvants impede the development of sublingual vaccines. Here, we describe a mucoadhesive patch made of a layer-by-layer assembly of polysaccharides, chitosan, and hyaluronic acid. The mucoadhesive patch was covered by adjuvanted nanoparticles carrying viral proteins. We showed that the nanoparticles effectively cross the outer layers of the sublingual mucosa to reach the epithelium. Furthermore, the encapsulated adjuvants, 3M-052 and mifamurtide, targeting toll-like receptor (TLR) 7/8 and nucleotide-binding oligomerization domain-2 (NOD2), respectively, remain fully active after encapsulation into nanoparticles and exhibit a cytokine/chemokine signature similar to the mucosal gold-standard adjuvant, the cholera toxin. However, the particulate adjuvants induced more moderate levels of proinflammatory interleukin (IL)-6 and keratinocyte chemoattractant (KC), suggesting a controlled activation of the innate immune response.

Glucan Particles: Choosing the Appropriate Size to Use as a Vaccine Adjuvant.

Beta-glucans are a group of polysaccharides with intrinsic immunostimulatory properties which makes the design of new particulate vaccine adjuvants based on β-glucans very promising. The size of the particles and the antigen loading method, encapsulated into particles or adsorbed on its surface, will influence the toxicological and adjuvanticity properties of the particulate adjuvant. Herein we describe the production of glucan nanoparticles (NPs) with three different sizes, approximately 150nm, 350nm, and microparticles as shells (GPs) with approximately 3μm. The association of the antigen to the particulate adjuvant is described using model protein antigens. The method can be easily adapted for real protein antigens.

Robust Immune Responses Elicited by a Hybrid Adjuvant Based on β-Glucan Particles from Yeast for the Hepatitis B Vaccine

The use of particulate adjuvants offers an interesting method for enhancing and modulating the immune responses elicited by vaccines. Aluminum salt (Alum) is one of the most important immune adjuvants approved by the Food and Drug Administration for use in humans because of its safety and efficacy, but it lacks the capacity to induce strong cellular and mucosal immune responses. In this study, we designed an antigen delivery system that combines aluminum salts with β-glucan particles. The β-glucan-aluminum particles (GP-Al) exhibited a highly uniform size of 2-4 μm and could highly specifically target antigen-presenting cells (APCs) and strongly induce dendritic cell (DC) maturation and cytokine secretion. In vivo studies showed that both WT mice and HBV-Tg mice immunized with hepatitis B surface antigen (HBsAg)-containing GP-Al displayed high anti-HBsAg IgG titers in the serum. Furthermore, in contrast to mice receiving the antigen alone, mice immunized with the particulate adjuvant exhibited IgG2a antibody titers and higher antigen-specific IFN-γ levels in splenocytes. In conclusion, we developed GP-Al microspheres to serve as a hepatitis B vaccine to enhance both humoral and cellular immune responses, representing a safe and promising system for antigen delivery.

An overview on liposomal delivery and adjuvant development for leishmaniosis vaccines.

Leishmaniosis is caused by different species of Leishmania parasites. The available treatments for this disease have not provided strong consistent results yet. The weak response of current chemotherapeutics can be attributed to their deficient effects on stealth parasites inside macrophages, rapid clearance from the site of action, and systemic side effects in high doses. To enhance leishmaniosis vaccine efficacy, it is a valuable strategy to use liposomes as vaccine delivery systems due to combined increase in technological advances and understanding of the immune system. Liposomes that contain and deliver immunostimulators and antigens are now being developed to target diseases that require stimulation of both humoral and cell-mediated immune responses. Hence, using particulate adjuvants, like liposomes for effective delivery to the antigen presenting cells (APCs) is important for improving leishmaniosis vaccine efficacy. This study aimed at reviewing liposomal adjuvants in vaccine development with specific accentuation on their adjuvant mechanism and surface charge. It also examined how specific physicochemical qualities of liposomes and the particle size during formulation design can affect the immune response.

Applying Microfluidics for the Production of the Cationic Liposome-Based Vaccine Adjuvant CAF09b.

Subunit vaccines require particulate adjuvants to induce the desired immune responses. Pre-clinical manufacturing methods of adjuvants are often batch dependent, which complicates scale-up for large-scale good manufacturing practice (GMP) production. The cationic liposomal adjuvant CAF09b, composed of dioctadecyldimethylammonium bromide (DDA), monomycoloyl glycerol analogue 1 (MMG) and polyinosinic:polycytidylic acid [poly(I:C)], is currently being clinically evaluated in therapeutic cancer vaccines. Microfluidics is a promising new method for large-scale manufacturing of particle-based medicals, which is scalable from laboratory to GMP production, and a protocol for production of CAF09b by this method was therefore validated. The influence of the manufacture parameters [Ethanol] (20–40% v/v), [Lipid] (DDA and MMG, 6–12 mg/mL) and dimethyl sulfoxide [DMSO] (0–10% v/v) on the resulting particle size, colloidal stability and adsorption of poly(I:C) was evaluated in a design-of-experiments study. [Ethanol] and [DMSO] affected the resulting particle sizes, while [Lipid] and [DMSO] affected the colloidal stability. In all samples, poly(I:C) was encapsulated within the liposomes. At [Ethanol] 30% v/v, most formulations were stable at 21 days of manufacture with particle sizes <100 nm. An in vivo comparison in mice of the immunogenicity to the cervical cancer peptide antigen HPV-16 E7 adjuvanted with CAF09b prepared by lipid film rehydration or microfluidics showed no difference between the formulations, indicating adjuvant activity is intact. Thus, it is possible to prepare suitable formulations of CAF09b by microfluidics.

Simultaneous in situ visualization and quantitation of dual antigens adsorbed on adjuvants using high content analysis.

Aim: Traditional antigenicity assay requires antigen recovery from the particulate adjuvants prior to analysis. An in situ method was developed for interrogating vaccine antigens with monoclonal antibodies while being adsorbed on adjuvants. Materials & methods: The fluorescence imaging-based high content analysis was used to visualize the antigen distribution on adjuvant agglomerates and to analyze the antigenicity for adsorbed antigens. Results: Simultaneous visualization and quantitation were achieved for dual antigens in a bivalent human papillomavirus vaccine with uniquely labeled antibodies. Good agreement was observed between the in situ multiplexed assays with well-established sandwich enzyme-linked immunosorbent assays. Conclusion: The streamlined procedures and the amenability for multiplexing make the in situ antigenicity analysis a favorable choice for in vitro functional assessment of bionanoparticles as vaccine antigens.

Recent Advances in Particulate Adjuvants for Cancer Vaccination

AbstractBy activating/stimulating antigen‐presenting cells (APCs) and efficiently inducing humoral or cellular immune responses, particulate adjuvants have become one of the most ambitious and promising strategies in cancer vaccination. A large number of materials have been studied for their use as particulate adjuvants, including inorganic materials, polymeric materials, liposomes, emulsions, and exosomes. According to their unique physicochemical properties, these particulate adjuvants mainly work in three aspects: antigen delivery, APC activation, and antigen cross‐presentation, and they show great promise in various antitumor applications. This progress report highlights the recent advances in the study of particulate adjuvants, ranging from their materials, functions, and physicochemical properties to their applications in cancer vaccination.

The droplet size of emulsion adjuvants has significant impact on their potency, due to differences in immune cell-recruitment and -activation

Self-emulsification is routinely used for oral delivery of lipophilic drugs in vivo, with the emulsion forming in vivo. We modified this technique to prepare novel oil-in-water emulsions of varying droplet size and composition on bench to enable adjuvanted vaccine delivery. We used these formulations to show that smaller droplets (20 nm) were much less effective as adjuvants for an influenza vaccine in mice than the emulsion droplet size of commercial influenza vaccine adjuvants (~160 nm). This was unexpected, given the many claims in the literature of the advantages of smaller particulates. We also undertook cell-recruitment mechanistic studies at site of injection and draining lymph nodes to directly address the question of why the smaller droplets were less effective. We discovered that emulsion droplet size and composition have a considerable impact on the ability to recruit immune cells to the injection site. We believe that further work is warranted to more extensively explore the question of whether, the smaller is not ‘better’, is a more common observation for particulate adjuvants.

B cell-intrinsic MyD88 signaling controls IFN-γ-mediated early IgG2c class switching in mice in response to a particulate adjuvant.

Adjuvants improve the potency of vaccines, but the modes of action (MOAs) of most adjuvants are largely unknown. TLR-dependent and -independent innate immune signaling through the adaptor molecule MyD88 has been shown to be pivotal to the effects of most adjuvants; however, MyD88's involvement in the TLR-independent MOAs of adjuvants is poorly understood. Here, using the T-dependent antigen NIPOVA and a unique particulate adjuvant called synthetic hemozoin (sHZ), we show that MyD88 is required for early GC formation and enhanced antibody class-switch recombination (CSR) in mice. Using cell-type-specific MyD88 KO mice, we found that IgG2c class switching, but not IgG1 class switching, was controlled by Bcell-intrinsic MyD88 signaling. Notably, IFN-γ produced by various cells including Tcells, NK cells, and dendritic cells was the primary cytokine for IgG2c CSR and B-cell intrinsic MyD88 is required for IFN-γ production. Moreover, IFN-γ receptor (IFNγR) deficiency abolished sHZ-induced IgG2c production, while recombinant IFN-γ administration successfully rescued IgG2c CSR impairment in mice lacking B-cell intrinsic MyD88. Together, our results show that Bcell-intrinsic MyD88 signaling is involved in the MOA of certain particulate adjuvants and this may enhance our specific understanding of how adjuvants and vaccines work.

Myalgia and chronic fatigue syndrome following immunization: macrophagic myofasciitis and animal studies support linkage to aluminum adjuvant persistency and diffusion in the immune system.

Myalgic Encephalomyelitis/Chronic Fatigue Syndrome (ME/CFS) is a multifactorial and poorly undersood disabling disease. We present epidemiological, clinical and experimental evidence that ME/CFS constitutes a major type of adverse effect of vaccines, especially those containing poorly degradable particulate aluminum adjuvants. Evidence has emerged very slowly due to the multiplicity, lack of specificity, delayed onset, and frequent medical underestimation of ME/CFS symptoms. It was supported by an epidemiological study comparing vaccinated vs unvaccinated militaries that remained undeployed during Gulf War II. Affected patients suffer from cognitive dysfunction affecting attention, memory and inter-hemispheric connexions, well correlated to brain perfusion defects and associated with a stereotyped and distinctive pattern of cerebral glucose hypometabolism. Deltoid muscle biopsy performed to investigate myalgia typically yields macrophagic myofasciitis (MMF), a histological biomarker assessing longstanding persistency of aluminum agglomerates within innate immune cells at site of previous immunization. MMF is seemingly linked to altered mineral particle detoxification by the xeno/autophagy machinery. Comparing toxicology of different forms of aluminum and different types of exposure is misleading and inadequate and small animal experiments have turned old dogma upside down. Instead of being rapidly solubilized in the extracellular space, injected aluminum particles are quickly captured by immune cells and transported to distant organs and the brain where they elicit an inflammatory response and exert selective low dose long-term neurotoxicity. Clinical observations and experiments in sheep, a large animal like humans, confirmed both systemic diffusion and neurotoxic effects of aluminum adjuvants. Post-immunization ME/CFS represents the core manifestation of "autoimmune/inflammatory syndrome induced by adjuvants" (ASIA).

Physicochemical properties of particulate vaccine adjuvants: their pivotal role in modulating immune responses

Vaccine adjuvants enhance immunogenic responses of antigens and increase potency of vaccines. Physicochemical properties of particulate vaccine adjuvants namely, particle size, surface charge, hydrophobicity, shape and composition play an important role to determine their activity and potency. Various studies have been done using different types of particulate vaccine adjuvants to correlate their physicochemical properties with immune responses. Generally, change in particle size does not show any trend in modulation of immunogenicity, however, it directly influences on cellular uptake of particles, leading to alteration of cytokine profile and induction of Th1 and/or Th2 responses. Usually, positively charged adjuvant particles undergo higher cellular uptake than negatively charged particles and hydrophobic particles undergo cellular uptake more efficiently than hydrophilic particles. Furthermore, shape and composition of adjuvant particles also influence on immune responses. This review gives an insight into the impact of particle size, surface charge, hydrophobicity, shape and composition of particulate vaccine adjuvants in modulating immune responses.

Evaluating dendritic cells as an in vitro screening tool for immunotherapeutic formulations

Immunotherapy approaches targeting dendritic cells (DCs) are being studied as treatment options in cancer. This project focused on utilizing DCs as a valuable in vitro screening tool for efficacious microparticle formulations containing tumor associated antigens (TAAs) and adjuvants as immunotherapy alternatives. The innate immune system, including DCs, distinctly responds to the particulate matter and adjuvants in these formulations which stimulates the adaptive immune system to eliminate resident cancer cells. We formulated microparticles (MPs) co-loaded with TAAs along with the adjuvants, AddaVax™ and Imiquimod, and measured their effect on DCs in eliciting a cell-mediated immune response towards tumors. The MP zeta potential was measured as −24.0 mV and −26.5 mV for blank and TAA/adjuvant co-loaded microparticles, and the average particle size was 671.2 nm and 854.4 nm respectively. We determined that nitric oxide (NO) secretion was significantly higher in the adjuvant MP treated DCs group and was dose dependent with 1 mg/mL demonstrating the highest secretion levels. TNF-α release was highest in AddaVax™/TAA and Imiquimod/TAA MPs treated DCs, while IL-6 secretion was highest from Imiquimod/TAA MPs as well as from combined AddaVax™/TAA and Imiquimod/TAA MPs. Overall, the cell surface marker expressions of CD80, CD86, CD40, CD54, MHC-I and MHC-II levels were highest with combined AddaVax™/TAA and Imiquimod/TAA MPs. The results of our experiments suggest that a combination of adjuvants targeting different DC receptors loaded with TAA MPs creates an efficient delivery system to T-cells that could improve adaptive immune responses. Our studies also confirm that DCs are potent innate immune cells that can be used successfully as an in vitro tool to screen novel delivery formulations focused on immunotherapy.

Gold nanoparticles conjugating recombinant influenza hemagglutinin trimers and flagellin enhanced mucosal cellular immunity

The immunogenicity of subunit vaccines can be augmented by formulating them into nanoparticles. We conjugated recombinant trimetric influenza A/Aichi/2/68(H3N2) hemagglutinin (HA) onto functionalized gold nanoparticle (AuNP) surfaces in a repetitive, oriented configuration. To further improve the immunogenicity, we generated Toll-like receptor 5 (TLR5) agonist flagellin (FliC)-coupled AuNPs as particulate adjuvants. Intranasal immunizations with an AuNP-HA and AuNP-FliC particle mixture elicited strong mucosal and systemic immune responses that protected hosts against lethal influenza challenges. Compared with the AuNP-HA alone group, the addition of AuNP-FliC improved mucosal B cell responses as characterized by elevated influenza specific IgA and IgG levels in nasal, tracheal, and lung washes. AuNP-HA/AuNP-FliC also stimulated antigen-specific interferon-γ (IFN-γ)-secreting CD4+ cell proliferation and induced strong effector CD8+ T cell activation. Our results indicate that intranasal co-delivery of antigen and adjuvant-displaying AuNPs enhanced vaccine efficacy by inducing potent cellular immune responses.