Particle Swarm Optimization Support Vector Machine Research Articles

Recognition of Heat-Damaged Corn Seeds Based on Fusion of Laser Ultrasonic Signal and Infrared Image Features

Corn is widely cultivated on a global scale. However, high temperatures during storage and transportation can lead to thermal damage to the kernels, negatively impacting their quality. Traditional methods for identifying heat-damaged grains primarily rely on manual inspection, which is characterized by low efficiency and accuracy. This study proposes a novel identification method that integrates laser ultrasonic signals with infrared image texture features. A pulsed laser stimulates the seeds to generate laser ultrasonic signals, while an infrared camera captures infrared images of the seeds. We extract time-domain, frequency-domain, and Hilbert-domain features from the laser ultrasonic signals, in addition to texture features from the infrared images. These features are combined using Canonical Correlation Analysis (CCA). Subsequently, the fused features are classified using a Backpropagation (BP) neural network, Support Vector Machine (SVM), and Particle Swarm Optimization–Support Vector Machine (PSO–SVM). The results indicate that the recognition rate achieved with the fused ‘signal-image’ features reaches 99.17%, providing a novel approach for detecting heat-damaged corn seeds.

An experimental study of knock analysis of HCNG fueled SI engine by different methods and prediction of knock intensity by particle swarm optimization-support vector machine

Hydrogen and its careers have a lot of potential in transportation industry due to lesser emissions and better performance. Performance of hydrogen enriched compressed natural gas (HCNG) fueled engine is limited by knock. The purpose of this study is to evaluate and predict knock at different operating conditions by varying (0 %–40 %) hydrogen amount in HCNG, by varying (25 %–100 %) load on engine and by varying (700 rpm–1700 rpm) speed of engine. Knock is evaluated by knock ratio, knock intensity, exhaust temperature and in-cylinder heat transfer rate. Quasi-dimensional combustion model (QDCM) MATLAB program is used to calculate in-cylinder pressure theoretically. By increasing (0 %–40 %) hydrogen in HCNG 32.7 %, 7.6 %, 33.5 %, 21.5 % & 6.4 % increment observed in, in-cylinder pressure, knock intensity, knock ratio, in-cylinder heat transfer rate and exhaust temperature respectively. By increasing (25 %–100 %) load on engine 75.8 %, 69.8 %, 88.2 %, 77.8 % & 46.7 % increment observed in, in-cylinder pressure, knock intensity, knock ratio, in-cylinder heat transfer rate & exhaust temperature respectively. By increasing speed (1100–1700) rpm of engine aforementioned parameters decreases by 12.19 %, 38.9 %, 36.06 %, 47.2 % & 14.1 % respectively. Knock intensity is predicted by particle swarm optimization-support vector machine (PSO-SVM) algorithm effectively. To minimize the prediction error, 31 combination of different (1–5) inputs applied to predict knock intensity and found combination of 5 input variable is 67.2 % & 71.9 % more accurate than 1 input variable in-terms of mean squared error and mean absolute error respectively. Findings of this study can be used to train electronic control unit of engine and in the development of HCNG fueled engine.

Estimation of Soil Moisture during Different Growth Stages of Summer Maize under Various Water Conditions Using UAV Multispectral Data and Machine Learning

Accurate estimation of soil moisture content (SMC) is vital for effective farmland water management and informed irrigation decision-making. The utilization of unmanned aerial vehicle (UAV)-based remote sensing technology to monitor SMC offers advantages such as mobility, high timeliness, and high spatial resolution, thereby compensating for the limitations of in-situ observations and satellite remote sensing. However, previous research has primarily focused on SMC diagnostics for the entire crop growth period, often neglecting the development of targeted soil moisture modeling paradigms that account for the specific characteristics of the canopy and root zone at different growth stages. Furthermore, the variations in soil moisture status between fields, resulting from the hysteresis of water flow in irrigation channels at different levels, may influence the development of soil moisture modeling schemes, an area that has been seldom explored. In this study, SMC models based on UAV spectral information were constructed using Random Forest (RF) and Particle Swarm Optimization-Support Vector Machine (PSO-SVM) algorithms. The soil moisture modeling paradigms (i.e., input–output mapping) under different growth stages and soil moisture conditions of summer maize were systematically compared and discussed, along with the corresponding physical interpretability. Our results showed that (1) the SMC modeling schemes differ significantly across the various growth stages, with distinct input–output mappings recommended for the early (i.e., jointing, tasselling, and silking stages), middle (i.e., blister and milk stages), and late (i.e., maturing stage) periods. (2) these machine learning-based models performed best at the jointing stage, while subsequently, their accuracy generally exhibited a downward trend as the maize grew. (3) the RF model demonstrates superior robustness in estimating soil moisture status across different fields (moisture conditions), achieving optimal estimation accuracy in fields with overall higher SMC in line with the PSO-SVM model. (4) unlike the RF model’s robustness in spatial SMC diagnostics, the PSO-SVM model more reliably captured the temporal dynamics of SMC across different growth stages of summer maize. This study offers technical references for future modelers in UAV-based SMC modeling across various spatial and temporal conditions, addressing both the types of models as well as their input features.

Research on Driver Style Recognition Based on GA-K-Means and PSO-SVM

<div>This article aims to address the challenge of recognizing driving styles, a task that has become increasingly complex due to the high dimensionality of driving data. To tackle this problem, a novel method for driver style clustering, which leverages the principal component analysis (PCA) for dimensionality reduction and an improved GA-K-means algorithm for clustering, is proposed. In order to distill low-dimensional features from the original dataset, PCA algorithm is employed for feature extraction and dimensionality reduction. Subsequently, an enhanced GA-K-means algorithm is utilized to cluster the extracted driving features. The incorporation of the genetic algorithm circumvents the issue of the model falling into local optima, thereby facilitating effective driver style recognition. The clustering results are evaluated using the silhouette coefficient, Calinski–Harabasz (CH) index, and GAP value, demonstrating that this method yields more stable classification results compared to traditional clustering methods. In the final stage, a particle swarm optimization-SVM (PSO-SVM) algorithm is applied to classify the clustering results, which are then compared with results from other machine learning algorithms such as decision tree, naive Bayes network, and K-nearest-neighbor (KNN). This comprehensive approach to driver style recognition holds promise for enhancing traffic safety and efficiency. The accurate recognition of driving style can lay the foundation for further optimization of advanced driver assistance systems (ADAS).</div>

Study on the Determination of Flavor Value of Rice Based on Grid Iterative Search Swarm Optimization Support Vector Machine Model and Hyperspectral Imaging.

In the field of rice processing and cultivation, it is crucial to adopt efficient, rapid and user-friendly techniques to detect the flavor values of various rice varieties. The conventional methods for flavor value assessment mainly rely on chemical analysis and technical evaluation, which not only deplete the rice resources but also incur significant time and labor costs. In this study, hyperspectral imaging technology was utilized in combination with an improved Particle Swarm Optimization Support Vector Machine (PSO-SVM) algorithm, i.e., the Grid Iterative Search Particle Swarm Optimization Support Vector Machine (GISPSO-SVM) algorithm, introducing a new non-destructive technique to determine the flavor value of rice. The method captures the hyperspectral feature data of different rice varieties through image acquisition, preprocessing and feature extraction, and then uses these features to train a model using an optimized machine learning algorithm. The results show that the introduction of GIS algorithms in a PSO-optimized SVM is very effective and can improve the parameter finding ability. In terms of flavor value prediction accuracy, the Principal Component Analysis (PCA) combined with the GISPSO-SVM algorithm achieved 96% accuracy, which was higher than the 93% of the Competitive Adaptive Weighted Sampling (CARS) algorithm. And the introduction of the GIS algorithm in different feature selection can improve the accuracy to different degrees. This novel approach helps to evaluate the flavor values of new rice varieties non-destructively and provides a new perspective for future rice flavor value detection methods.

Predicting the amino group pKa of amino acids using machine learning-QSPR methods

Amino acids are one of the main building blocks of proteins, and because of this connection and their main role in biochemistry, they are of great interest in pharmaceutical industries today. In nature, there are approximately 300 amino acids, out of which 20 are present in the human body and are responsible for protein synthesis. As a result, amino acids are widely used in various fields such as biological sciences, chemistry, medicine, and various industries. This research focuses on estimating the acid dissociation constant (pKa) of the amino group related to 52 amino acids using the quantitative structure–property relationship (QSPR) method, employing four different regression models: Genetic Algorithm-Multivariable Linear Regression (GA-MLR), Particle Swarm Optimization-Support Vector Machine (PSO-SVM), Feed Forward Neural Network (FFNN), and Decision Tree (DT). Using the GA-MLR, the optimal number of descriptors for estimating pKa was determined to be 9. By comparing different machine learning models, it can be observed that the coefficient of determination (R2) follows the trend R2 PSO-SVM = 0.9681 > R2 FFNN = 0.9539 > R2 DT = 0.9329 > R2 GA-MLR = 0.9231. Therefore, the PSO-SVM model provided the best prediction, while the FFNN, DT, and GA-MLR models ranked next in terms of precision in predicting the pKa of amino acids. By dividing the data into test/train sets in a ratio of approximately 20/80, the model's validity was confirmed due to the nearness of the R2 values between the training and testing sets. Ultimately, the best model is capable of predicting the pKa value of the amino group in amino acids with a mean absolute percent error of 1.18 %.

Near-infrared spectroscopy for the quality control of Sarassum fusiforme: Prediction of antioxidant capability of Sarassum fusiforme at different growth stages

The healthy benefits of seaweed have increased its market demand in recent times. Quality control is crucial for seaweed to ensure the customers’ interest and the sustainable development of seaweed farming industry. This study developed a quality control method for seaweed Sargassum fusiforme, rapid and simple, using near-infrared spectroscopy (NIR) and chemometrics for the prediction of antioxidant capacity of S. fusiforme from different growth stages, S. fusiforme was distinguished according to growth stage by partial least squares-discriminant analysis (PLS-DA) and particle swarm optimization-support vector machine (PSO-SVM). The antioxidant properties including 2,2′-azinobis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) scavenging capacity, 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging capacity, and ferric reducing antioxidant power (FRAP) were quantified using competitive adaptive reweighted sampling (CARS)-PLS model. Based on the spectra data preprocessed by multiplicative scatter and standard normal variate methods, the PSO-SVM models can accurately identify the growth stage of all S. fusiforme samples. The CARS-PLS models exhibited good performance in predicting the antioxidant capacity of S. fusiforme, with coefficient of determination (RP2) and root mean square error (RMSEP) values in the independent prediction sets reaching 0.9778 and 0.4018 % for ABTS, 0.9414 and 2.0795 % for DPPH, and 0.9763 and 2.4386 μmol L−1 for FRAP, respectively. The quality and market price of S. fusiforme should increase in the order of maturation < growth < seedling regarding the antioxidant property. The overall results indicated that the NIR spectroscopy accompanied by chemometrics can assist for the quality control of S. fusiforme in a more rapid and simple manner. This study also provided a customer-oriented concept of seaweed quality grading based on deep insight into the antioxidant capability of S. fusiforme at different growth stages, which is highly valuable for precise quality control and standardization of seaweed market.

Simultaneous measurement of NH3 and NO by mid-infrared tunable diode laser absorption spectroscopy based on machine-learning algorithms

Accurate measurements of NH3 and NO are essential for controlling NOx emissions from coal-fired power plants, reducing ammonia slip, and improving the efficiency of selective catalytic reduction (SCR) operation. We propose a method for measuring NH3 and NO concentrations based on machine learning algorithms to address the challenges posed by overlapping interference of CO2 and H2O spectral lines in flue gas. Our approach introduces a novel method for acquiring mixture spectra for the model. Initially, we measure the spectra of individual components under different concentrations and temperatures. Subsequently, mixed spectral samples are generated by combining the measured spectra of the individual components. This approach simplifies the spectral measurement process while preserving accuracy. The particle swarm optimization support vector machine (PSO-SVM) algorithm is leveraged, providing a reliable foundation for the continuous and synchronous measurement of NH3 and NO. Upon testing, the PSO-SVM demonstrates average relative errors of 4.0 % and 0.8 % for NH3 and NO concentrations, respectively. The corresponding measurement precision is 0.05 ppm for NH3 and 0.42 ppm for NO, better than the conventional integral absorbance method. The minimum detection limit (MDL) for NH3 is 16.1 ppb at an average time of 50 s, while for NO, it is 38.4 ppb at an average time of 71 s. The methodology of this paper is expected to play an important role in reducing the influence of interfering components and improving the accuracy of field measurements.

Establishment of critical non-depositing velocity prediction model for sediment in drip irrigation laterals based on PSO-SVM

Accurately determining the critical non-depositing velocity for sediment (CNDVS) in drip irrigation laterals is essential to address issues of sediment deposition and clogging in drip irrigation pipes caused by the use of muddy water. This paper focuses on three main factors: the percentage of intermediate-sized sediment particles (P), pipe diameter (D), and sediment concentration (S), all of which significantly influence the CNDVS in drip irrigation laterals. To predict the CNDVS, a comprehensive gradient test was developed and the Particle Swarm Optimization-Support Vector Machine (PSO-SVM) algorithm was applied to establish a response surface for predicting the CNDVS. Additionally, the PSO algorithm optimized the penalty parameter (C), loss parameter (ε), and kernel parameter (δ) in the SVM, resulting in a prediction model for the CNDVS. The proposed model was trained and tested using experimental data, and its prediction performance and accuracy were compared with the regression fitting model. The results indicate that within a specific range, the CNDVS increases with higher values of the three factors. The PSO-SVM model, with optimal parameters combination values of C = 486.37, ε = 0.04, and δ = 68.49, provided the most prediction accurate. Compared with the regression fitting model, the PSO-SVM model has the smaller values of Mean Absolute Error (MAE) = 0.0049, Root Mean Square Error (RMSE) = 0.0057, and Percent Bias (PBIAS) = 0.0004, and the larger value of Nash–Sutcliffe Efficiency (NSE) = 0.9874, Willmott index (WI) = 0.9401, and Coefficient of Determination (R2) = 0.9875. These results demonstrate that the PSO-SVM model established in this study exhibits high prediction performance and accuracy. The findings of this research can serve as a foundation for developing optimal operating and flushing flow velocity within the laterals in muddy water drip irrigation systems.

A novel intelligent risk prediction model for the effectiveness of CO2/N2–ECGD technology

AbstractTo solve the problems of high sampling requirements and low predictive accuracy resulting from the complexity, uniqueness, and randomness of predicting the risk of the CO2 and N2 injection to enhance coal seam gas drainage (CO2/N2–ECGD) technology. The principal component analysis (PCA) method to reduce the dimensionality of the factor data that contribute to the effect risk of the technology was adopted. And the particle swarm optimization (PSO) method was implemented to search for optimal hyperparameters in support vector machine (SVM) by particle search, as a solution to the traditional SVM hyperparameters optimization problem. A novel risk prediction model using machine learning algorithms for gas injection displacement technology was constructed. The prediction results were tested and compared with those of backpropagation (BP), Random Forest (RF), and Decision Tree (DT) models using data from 29 gas injection displacement field projects in China. The results demonstrated that the SVM model had greater accuracy in prediction than the other three models. Additionally, after PSO optimization and dimensionality reduction, the PCA–PSO–SVM model reached 100% prediction accuracy, while requiring less modeling and operation time. The study provided a reliable and reasonable model for predicting technical effects, along with a theoretical basis for risk management and prevention. First, the technology's influencing indicators were analyzed by examining its mechanisms. Second, we utilized the PCA method to reduce the dimensionality of the factor data that contribute to the risk of the technology's effects. Third, we implemented the PSO method to search for optimal hyperparameters in the SVM through particle search, as a solution to the traditional SVM hyperparameters optimization problem. Finally, the prediction results were tested and compared with those of BP, RF, and DT models using data from 29 gas injection displacement field projects in China. The SVM model was found to have greater accuracy in prediction than the other three models. After PSO optimization and dimensionality reduction, the PCA–PSO–SVM model achieved 100% prediction accuracy while requiring less modeling and operation time. The study presents a valid and reasonable model for predicting technical effects and a theoretical basis for risk management and prevention.

A form-grinding wheel optimization method for helical gears based on a PSO-SVM model

A gear form-grinding optimization method is proposed to obtain an optimal profile of a form-grinding wheel by solving a transcendental equation of the contact line between a form-grinding wheel and a helical gear workpiece. Since the equation of the contact line is transcendental, the relationship between the installation angle of the form-grinding wheel and the shape of the contact line cannot be represented by explicit functions, which makes it difficult to obtain the optimal profile of the form-grinding wheel. An optimization method of the contact line between the form-grinding wheel and the gear is proposed using three evaluation parameters that are the overrun, the shift, and the offset. Some gear form-grinding performances, such as machining stroke, tooth deviation, and grinding chatter, can be quantitatively described using those evaluation parameters. Further, a method for optimizing evaluation parameters is proposed, which uses a particle swarm optimization-support vector machine (PSO-SVM) model with the advantage of small-sample robustness to solve evaluation parameters. The PSO-SVM model is trained under the condition of different installation angles of the form-grinding wheel as the input and the evaluation function as the output. The R-squared value of the overrun is 0.986 that vilidate the high accuracy of the PSO-SVM model. Gear form-grinding test results show the proposed method can effectively improve grinding accuracy.

Data-augmented landslide displacement prediction using generative adversarial network

Landslides are destructive natural disasters that cause catastrophic damage and loss of life worldwide. Accurately predicting landslide displacement enables effective early warning and risk management. However, the limited availability of on-site measurement data has been a substantial obstacle in developing data-driven models, such as state-of-the-art machine learning (ML) models. To address these challenges, this study proposes a data augmentation framework that uses generative adversarial networks (GANs), a recent advance in generative artificial intelligence (AI), to improve the accuracy of landslide displacement prediction. The framework provides effective data augmentation to enhance limited datasets. A recurrent GAN model, RGAN-LS, is proposed, specifically designed to generate realistic synthetic multivariate time series that mimics the characteristics of real landslide on-site measurement data. A customized moment-matching loss is incorporated in addition to the adversarial loss in GAN during the training of RGAN-LS to capture the temporal dynamics and correlations in real time series data. Then, the synthetic data generated by RGAN-LS is used to enhance the training of long short-term memory (LSTM) networks and particle swarm optimization-support vector machine (PSO-SVM) models for landslide displacement prediction tasks. Results on two landslides in the Three Gorges Reservoir (TGR) region show a significant improvement in LSTM model prediction performance when trained on augmented data. For instance, in the case of the Baishuihe landslide, the average root mean square error (RMSE) increases by 16.11%, and the mean absolute error (MAE) by 17.59%. More importantly, the model's responsiveness during mutational stages is enhanced for early warning purposes. However, the results have shown that the static PSO-SVM model only sees marginal gains compared to recurrent models such as LSTM. Further analysis indicates that an optimal synthetic-to-real data ratio (50% on the illustration cases) maximizes the improvements. This also demonstrates the robustness and effectiveness of supplementing training data for dynamic models to obtain better results. By using the powerful generative AI approach, RGAN-LS can generate high-fidelity synthetic landslide data. This is critical for improving the performance of advanced ML models in predicting landslide displacement, particularly when there are limited training data. Additionally, this approach has the potential to expand the use of generative AI in geohazard risk management and other research areas.

Near-Infrared Off-Axis Cavity-Enhanced Optical Frequency Comb Spectroscopy for CO2/CO Dual-Gas Detection Assisted by Machine Learning.

Cavity-enhanced direct frequency comb spectroscopy (CE-DFCS) is widely used as a highly sensitive gas sensing technology in various gas detection fields. For the on-axis coupling incidence scheme, the detection accuracy and stability are seriously affected by the cavity-mode noise, and therefore, stable operation inevitably requires external electronic mode-locking and sweeping devices, substantially increasing system complexity. To address this issue, we propose off-axis cavity-enhanced optical frequency comb spectroscopy from both theoretical and experimental aspects, which is applied to the detection of single- and dual-gas of carbon monoxide (CO) and carbon dioxide (CO2) in the near-infrared. An erbium-doped fiber frequency comb with a repetition frequency of ∼41.709 MHz is coupled into a resonant cavity with a length of ∼360 mm in an off-axis manner, exciting numerous high-order modes to effectively suppress cavity-mode noise. The performance of multiple machine learning models is compared for the inversion of a single/dual gas concentration. A few absorbance spectra are collected to build a sample data set, which is then utilized for model training and learning. The results demonstrate that the Particle Swarm Optimization Support Vector Machine (PSO-SVM) model achieves the highest predictive accuracy for gas concentration and is ultimately applied to the detection system. Based on Allan deviation, the detection limit for CO in single-gas detection can reach 8.247 parts per million by volume (ppmv) by averaging 87 spectra. Meanwhile, for simultaneous CO2/CO measurement with highly overlapping absorbance spectra, the LoD can be reduced to 13.196 and 4.658 ppmv, respectively. The proposed optical gas sensing technique indicates the potential for the development of a field-deployable and intelligent sensor system capable of simultaneous detection of multiple gases.

An Improved Internet of Thing-based Optimized SVM Approach for ECG-founded Cardiac Arrhythmia Classification

Cardiovascular diseases (CVD) stand as the leading cause of global mortality, claiming millions of lives annually. An electrocardiogram (ECG) records the heart's electrical activity based on the Internet of Things (IoT), crucial in detecting cardiac arrhythmias (CA), characterized by irregular heart rates and rhythms. Signals from the MIT-BIH Arrhythmia Physio net database are analyzed. This chapter aims to propose a hybrid approach merging Genetic Algorithm-Support Vector Machine (GSVM) and Particle Swarm Optimization-Support Vector Machine (PSVM) for CA classification. The study introduces an algorithm for categorizing ECG beats into six groups using Independent Component Analysis (ICA)-derived features. Optimal SVM settings are determined using Genetic Algorithm (GA) and Particle Swarm Optimization (PSO) on ICA features computed via non-parametric power spectral estimation. The research delves into the origins and methodologies of GA and PSO. Simulation results comparing GSVM and PSVM are presented, emphasizing PSVM's superior performance in accuracy, sensitivity, specificity, and positive predictivity. Detailed performance metrics, including Sensitivity, Specificity, Positive Predictivity, and Accuracy percentages, are scrutinized and compared against the top classifier. The findings endorse PSVM's superiority over GSVM, indicating enhanced performance across multiple evaluation criteria.

Coal structure identification based on geophysical logging data: Insights from Wavelet Transform (WT) and Particle Swarm Optimization Support Vector Machine (PSO-SVM) algorithms

Coal structure is closely related to microscopic and macroscopic properties of coal, and its accurate identification is of great significance to coalbed methane (CBM) reservoir evaluation, hydraulic fracturing performance and production efficiency prediction. The identification of coal structure based on geophysical logging data has become a popular topic as well as a challenge. The emerging Machine Learning (ML) provides convenience for this issue. Under this background, in the case of the Shanxi Formation No. 3 coal seam and the Taiyuan Formation No. 15 coal seam in Mabidong Block, Qinshui Basin, China, this paper proposed a new coal structure identification method based on geophysical logging data using Wavelet Transform (WT) and Particle Swarm Optimization Support Vector Machine (PSO-SVM) algorithms. Our results showed that the vertical resolution of logging data can be effectively improved when sym5 wavelet basis and third level decomposition were selected in wavelet decomposition, and 4.5 was selected as the weighting coefficient in wavelet reconstruction. The coal structure prediction model based on the logging data processed by WT was established by PSO-SVM algorithm, where PSO was used for parameter optimization (optimal penalty factor C and width parameter σ) and SVM with Radial Basis Function (RBF) kernel was used for model establishment. The Hold-out Cross Validation (HO CV) method was used to test the generalization ability of the prediction model, and the accuracy (ACC) of coal structure prediction in the training set and testing set was 94.26% and 88.46%, respectively. The prediction model was applied to identify the coal structure of two coring wells and the predicted coal structure class was consistent with the true coal structure class, confirming the validity of the model. The coal structure prediction results in the whole study area showed that the tectonic conditions control the coal structure. This work provides new insights for coal structure identification.

Forecast earthquake precursor in the Flores Sea

&lt;span&gt;Artificial intelligence (AI) can use seismic training data to discover relationships between inputs and outcomes in real-world applications. Despite this, particularly when using geographical data, it has not been used to predict earthquakes in the Flores Sea. The algorithm will read the seismic data as a pattern of iterations throughout the operation. The output data is created by grouping based on clusters using the most effective WCSS analysis, while the input features are derived from the original international resource information system (IRIS) web service data. Given that earthquake prediction is an effort to reduce seismic disasters, this research is essential. By generating predictions, it can reduce the devastation caused by earthquakes. Using the support vector machine (SVM), hyperparameter support vector machine (HP-SVM), and particle swarm optimization support vector machine (PSO-SVM) algorithms, this study seeks to forecast the Flores Sea earthquake. According to the estimation results, the SVM algorithm’s evaluation value is less precise than that of the HP-SVM, especially the linear HP-SVM and HP-SVM Polynomial models. However, the HP-SVM RBF model’s accuracy rating is identical to that of the traditional SVM model. &lt;br /&gt; The improvement of the PSO-SVM model, which has the finest gamma position and a value of 9.&lt;/span&gt;

An advanced approach for fig leaf disease detection and classification: Leveraging image processing and enhanced support vector machine methodology.

In the rapidly evolving landscape of agricultural technology, image processing has emerged as a powerful tool for addressing critical agricultural challenges, with a particular focus on the identification and management of crop diseases. This study is motivated by the imperative need to enhance agricultural sustainability and productivity through precise plant health monitoring. Our primary objective is to propose an innovative approach combining support vector machine (SVM) with advanced image processing techniques to achieve precise detection and classification of fig leaf diseases. Our methodology encompasses a step-by-step process, beginning with the acquisition of digital color images of diseased leaves, followed by denoising using the mean function and enhancement through Contrast-limited adaptive histogram equalization. The subsequent stages involve segmentation through the Fuzzy C Means algorithm, feature extraction via Principal Component Analysis, and disease classification, employing Particle Swarm Optimization (PSO) in conjunction with SVM, Backpropagation Neural Network, and Random Forest algorithms. The results of our study showcase the exceptional performance of the PSO SVM algorithm in accurately classifying and detecting fig leaf disease, demonstrating its potential for practical implementation in agriculture. This innovative approach not only underscores the significance of advanced image processing techniques but also highlights their substantial contributions to sustainable agriculture and plant disease mitigation. In conclusion, the integration of image processing and SVM-based classification offers a promising avenue for advancing crop disease management, ultimately bolstering agricultural productivity and global food security.

Multi-objective diesel engine emission management and control technology based on SVM and NSGA-II

To improve the emission control effect of diesel engines, a pre-emission model for diesel engines using biofuels is constructed using support vector machine. Considering that traditional support vector machine training relies on initial parameters and is prone to local convergence, a genetic algorithm model is adopted to construct an improved diesel engine pre-emission model. At the same time, with the optimization goal of diesel engine emissions of particles and gases, the improved diesel engine pre-emission model is used to obtain emission data as training parameters. The second generation non-dominated genetic algorithm is introduced to construct a multi-objective diesel engine emission control model, achieving optimal control of diesel engine emissions. In the experimental analysis of diesel engine pre emission models, the proposed pre emission model has a better prediction effect in nitrogen oxides, with an average prediction accuracy of 0.986, which is better than the Particle Swarm Optimization-Support Vector Machine model's 0.906, and is more accurate in detecting emissions. Simultaneously predicting particulate matter, the average prediction accuracy of the proposed model is 0.978, while the prediction accuracy of the Particle Swarm Optimization-Support Vector Machine model is 0.902, indicating that the overall prediction effect of the proposed method is better. In the experimental analysis of multi-objective optimization models, the proposed multi-objective optimization model performs best in diesel emission optimization. The proposed model can achieve convergence in the shortest time, and the minimum nitrogen oxide emissions are 210.7 ppm. Compared with Non-dominated Sorting Genetic Algorithm II and Multi-Objective Particle Swarm Optimization models, the particle emission optimization effect is improved by 23.5 % and 18.6 %. From this, it can be seen that the proposed method has excellent performance in diesel engine emission monitoring and pollutant optimization, surpassing related technologies in the same period. The research technology provides important technical references for the monitoring and emission control of harmful substances in diesel engines.

Predicting pKa of the carboxylic acid group in water solutions of amino acids based on molecular structures using machine learning QSPR methods

Amino acids as biomolecules are essential building blocks of proteins, which are fundamental to life and living organisms. The pKa values of amino acid residues in proteins can impact their structure and function. Furthermore, the pKa can be used to optimize experimental conditions for protein purification. In this research, a data set containing the pKa of the carboxylic acid group for 52 amino acids from various families in a water solution was used. The quantity structure property relationship (QSPR) approach was applied in our work for predicting the pKa using different machine learning methods. Initially, the amine molecules were drawn, and optimized and 3224 molecular descriptors were calculated for each molecule. Selecting among molecular descriptors using genetic algorithm-multi linear regression (GA-MLR) shows that the model with 8 descriptors is the best economic one. The comparison of results shows that the feed forward neural network (FFNN) is better than the particle swarm optimization-support vector machine (PSO-SVM) model. The coefficients of determination at different models follow the order of R2 FFNN= 0.9987 > R2 PSO-SVM= 0.9971 > R2 GA-MLR= 0.9951. The R2test for FFNN and PSO-SVM are near the R2train and this evidence proves the validation of models. Consequently, by using FFNN, the pKa of the carboxylic acid group in water solutions of amino acids can be predicted without any experimental costs with a low average absolute relative error (AARE%) of 2.82.

Load forecasting for regional integrated energy system based on complementary ensemble empirical mode decomposition and multi-model fusion

The multiple loads of the Regional Integrated Energy System (RIES) possess characteristics of randomness and relatively higher complexity. The current forecasting methods struggle to effectively handle the non-stationary sequence of these multiple loads, leading to less accurate load forecasting. To address this problem, this paper proposes a multi-model fusion prediction method based on Complementary Ensemble Empirical Mode Decomposition (CEEMD), Genetic Algorithm-Long Short Term Memory (GA-LSTM), Radial Basis Fusion-Autoencoder (RBF-AE), and Particle Swarm Optimization-Support Vector Machine (PSO-SVM). First, the load sequence is decomposed into different frequency Intrinsic Mode Functions (IMFs) components using CEEMD. The IMFs components are then grouped based on their zero-crossing rate and Sample Entropy (SE), resulting in three distinct groups: high-, medium-, and low-frequency components. Next, the high-frequency load component, which exhibit strong randomness, are predicted using GA-LSTM. The medium-frequency load component, which have weaker randomness, are predicted using RBF-AE. The smooth and periodic low-frequency load component are predicted using PSO-SVM. The prediction results from these three models are reconstructed to obtain the final predictive value. Finally, experimental results confirm that the forecasting model can effectively handle non-stationary load sequences and demonstrate the highest level of forecasting accuracy.