Palladium-catalyzed Cross-coupling Research Articles

Development of a palladium-catalyzed decarboxylative arene cross-coupling of pyrrole derivatives in a flow reactor

Development of a palladium-catalyzed decarboxylative arene cross-coupling of pyrrole derivatives in a flow reactor

Total Synthesis of (+)-Neopeltolide by the Macrocyclization/Transannular Pyran Cyclization Strategy

An 11-step synthesis of (+)-neopeltolide was developed. The C1-C7 carboxylic acid and the C8-C16 alcohol were prepared, each in six steps, from (R)- and (S)-epichlorohydrin, respectively. After esterification, our tandem macrocyclization/transannular pyran cyclization strategy was applied to a stereocontrolled construction of the neopeltolide macrolactone. The side chain was synthesized in six steps from ethyl 4-oxazolecarboxylate through palladium-catalyzed cross-couplings. A Mitsunobu reaction of the neopeltolide macrolactone and the side chain completed the synthesis.

Palladium-Catalyzed Cross-Coupling Reaction of Diarylmethanol Derivatives with Diborylmethane.

A palladium-catalyzed cross-coupling reaction of diarylmethanol derivatives with diborylmethane has been developed. The reaction proceeds chemoselectively to deliver the corresponding homobenzylic boronates in good yields.

Unconventional Site Selectivity in Palladium-Catalyzed Cross-Couplings of Dichloroheteroarenes under Ligand-Controlled and Ligand-Free Systems.

Halides adjacent to nitrogen are conventionally more reactive in Pd-catalyzed cross-couplings of dihalogenated N-heteroarenes. However, a very sterically hindered N-heterocyclic carbene ligand is shown to promote room-temperature cross-coupling at C4 of 2,4-dichloropyridines with high selectivity (∼10:1). This work represents the first highly selective method with a broad scope for C4-coupling of these substrates where selectivity is clearly under ligand control. Under the optimized conditions, diverse substituted 2,4-dichloropyridines and related compounds undergo cross-coupling to form C4-C(sp2) and C4-C(sp3) bonds using organoboron, -zinc, and -magnesium reagents. The synthetic utility of this method is highlighted in multistep syntheses that combine C4-selective cross-coupling with subsequent nucleophilic aromatic substitution reactions. The majority of the products herein (71%) have not been previously reported, emphasizing the ability of this methodology to open up underexplored chemical space. Remarkably, we find that ligand-free "Jeffery" conditions enhance the C4 selectivity of Suzuki coupling by an order of magnitude (>99:1). These ligand-free conditions enable the first C5-selective cross-couplings of 2,5-dichloropyridine and 2,5-dichloropyrimidine.

Thioetherification of Aryl Halides with Thioacetates.

A palladium-catalyzed cross-coupling of thioacetates and aryl halides is described herein. Using a catalyst screening kit, tBuBrettPhos Pd G3 was found to be a unique catalyst for this reaction, affording the desired thioarene products in high yields under mild reaction conditions. The thioacetate starting materials are readily available, allowing for quick access to these more lab friendly reagents. Reactions described herein range from the late-stage coupling of complex thioacetates to the first report of a mild set of conditions for thiomethylation of aryl halides.

Palladium-Catalyzed Alkynylation of Enones with Alkynylsilanes via C-C Bond Activation.

We report herein the synthesis of 1,3-enynes via palladium-catalyzed cross-coupling between enone derivatives and alkynylsilanes. The employment of an appropriate pyridine-oxazoline ligand is the key to the C-C cleavage and the high E/Z stereoselectivity. This protocol features broad substrate scope and wide functional-group tolerance, affording the desired products in moderate-to-good yields. Late-stage diversification of natural product β-ionone further demonstrated the synthetic utility of this protocol.

Palladium-Catalyzed Suzuki-Miyaura Cross-Coupling of Oxygen-Substituted Allylboronates with Aryl/Vinyl (Pseudo)Halides.

An efficient palladium-catalyzed Suzuki-Miyaura cross-coupling reaction of oxygen atom-substituted allylboronates with aryl/vinyl bromides, iodides, and triflates has been developed. The present coupling reactions proceeded smoothly to provide a variety of allylic siloxanes with high efficiency and excellent regioselectivity. This protocol features broad substrate scope, excellent functional group tolerance, and easy gram-scale preparation, and offers an alternative approach for the synthesis of allylic alcohols and their derivatives.

Palladium-catalyzed cross-coupling of alkylindium reagent with diaryliodonium salt

The palladium-catalyzed cross-couplings of alkylindium reagents with diaryliodonium salts proceeded efficiently in the presence of tetrakis(triphenylphosphine)palladium [Pd(PPh3)4], 2-dicyclohexylphosphino-2′,6′-dimethoxybiphenyl (SPhos), lithium tert-butoxide, and lithium chloride in DMA/THF (1:1) at 100 °C, leading to the corresponding cross-coupling products in moderate to good yield with broad substrate scope and wide functional group tolerance.

Synthesis of Pyrethroids and Jasmonoids through Palladium-Catalyzed Cross-Coupling Reactions

AbstractThe synthesis of jasmone and related jasmonoids and pyrethroids is described. These compounds play a defensive role in plants and share a common cyclopentenone core with variations in the side chains. Jasmone, cinerone, allylrethrone, and derivatives were synthesized through π-allyl palladium cross-coupling of stannane derivatives. With selective hydrogenation, dihydrojasmone, and dihydrocinerone were also synthesized.

A new protocol for synthesizing diarylmethanes using a benzyltitanium reagent as a nucleophile

The first palladium-catalyzed cross-coupling of various substituted benzyltitaniums with aryl triflates is presented for the synthesis of diarylmethanes in yields of up to 94% through highly selective C–O bond functionalization. The benzyltitaniums act as nucleophiles to realize the C(sp2)–C(sp3) cross-coupling with high efficiency in short reaction times. The reactions proceed at 60°C and show excellent functional groups tolerance.

Diindolylamine Preparation and Stability Investigations.

The synthesis of diindolylamines via the palladium-catalyzed cross-coupling of aminoindoles and bromoindoles has been investigated, and efficient coupling conditions using BrettPhos, Pd(OAc)2, K2CO3, and tBuOH have been identified. The diindolylamines were found to be unstable in ambient conditions. Blocking the reactive 3-position of the bromoindole coupling partner with a tert-butyl group results in a diindolylamine with improved air stability. NMR, CV, and UV–vis studies on an asymmetrically substituted 3-tert-butyl-3′H-diindolylamine indicate that the instability of the diindolylamine substrates is likely due to oxidative oligomerization. Literature conditions used for the preparation of 3-tert-butylindoles afforded only the indole tetramer. The presence of water during the alkylation reaction was identified as the cause of the formation of the tetramer. Replacing hygroscopic tBuOH with nonhygroscopic tBuCl as the alkylating reagent provided access to 7-bromo-3-tert-butyl indole.

Unraveling the Mechanism of Palladium-Catalyzed Base-Free Cross-Coupling of Vinyl Carboxylates: Dual Role of Arylboronic Acids as a Reducing Agent and a Coupling Partner

Unraveling the Mechanism of Palladium-Catalyzed Base-Free Cross-Coupling of Vinyl Carboxylates: Dual Role of Arylboronic Acids as a Reducing Agent and a Coupling Partner

Palladium-catalyzed cross-coupling of benzyltitanium(IV) reagents with aryl fluorides

Palladium-catalyzed cross-coupling of benzyltitanium(IV) reagents with aryl fluorides

Unified synthesis of multiply arylated alkanes by catalytic deoxygenative transformation of diarylketones.

A deoxygenative transformation of diarylketones leading to multiply arylated alkanes was developed. Diarylketones were reacted with diphenylphosphine oxide resulting in a phospha-Brook rearrangement, followed by palladium-catalyzed cross-couplings or a Friedel-Crafts type alkylation to afford the corresponding multiply arylated alkanes. A variety of diarylketones can be converted to multiply arylated alkanes such as diarylmethanes, tetraarylethanes, and triarylmethanes by reduction, dimerization, and arylation in one pot. Furthermore, a one-pot conversion from arylcarboxylic acids to diarylmethanes and tetraarylethanes, and a synthesis of tetraarylmethane and triphenylethane using sequential coupling reactions are also presented.

Advanced inorganic chemistry laboratory curricula in Australian universities: investigating the major topics and approaches to learning

The teaching laboratory remains an important environment for developing undergraduate chemists, but the inherent diversity of inorganic chemistry results in less standardised undergraduate curricula than other sub-disciplines. This study surveys the content of advanced (third-year) inorganic chemistry across Australia and reviews experimental materials from 15 universities that offer inorganic laboratory programmes at this level. All institutions offer at least one traditional inorganic experiment, the most common being the preparation and acetylation of ferrocene, spectroscopy and magnetochemistry of nickel coordination compounds and palladium-catalysed cross-couplings. These inorganic classics are complemented by a breadth of non-traditional offerings that often align with institutional research strengths. Academic unit coordinators were also surveyed and their responses interpreted using ASELL (Advancing Science and Engineering through Laboratory Learning) tools. Advanced inorganic laboratory programmes were found to develop students’ practical and transferrable skills. Students generally receive guidance from teaching staff in all aspects of experimental work, including planning, development, analysis and communicating conclusions. Academic unit coordinators identified potential improvements that included diversifying student activities in the lab and how they are being assessed.

Palladium-catalyzed cross-coupling of unreactive C(sp3)-H bonds with azole C(sp2)-H bonds by using bromide as a traceless directing group.

A palladium-catalyzed intermolecular cross-coupling of unreactive C(sp3)-H bonds and azole C(sp2)-H bonds with bromide as a traceless directing group is described. The judicious selection of the bulky and electron-rich phosphine ligand is the key for the success of this cascade process. The protocol features a broad substrate scope, excellent regioselectivity, and good functional group tolerance.

A reactivity model for oxidative addition to palladium enables quantitative predictions for catalytic cross-coupling reactions.

Making accurate, quantitative predictions of chemical reactivity based on molecular structure is an unsolved problem in chemical synthesis, particularly for complex molecules. We report an approach to reactivity prediction for catalytic reactions based on quantitative structure-reactivity models for a key step common to many catalytic mechanisms. We demonstrate this approach with a mechanistically based model for the oxidative addition of (hetero)aryl electrophiles to palladium(0), which is a key step in myriad catalytic processes. This model links simple molecular descriptors to relative rates of oxidative addition for 79 substrates, including chloride, bromide and triflate leaving groups. Because oxidative addition often controls the rate and/or selectivity of palladium-catalyzed reactions, this model can be used to make quantitative predictions about catalytic reaction outcomes. Demonstrated applications include a multivariate linear model for the initial rate of Sonogashira coupling reactions, and successful site-selectivity predictions for Suzuki, Buchwald-Hartwig, and Stille reactions of multihalogenated substrates relevant to the synthesis of pharmaceuticals and natural products.

DCID-mediated Heck cross-coupling of phenolsviaC–O bond activation

In this work a palladium-catalyzed Heck cross-coupling of phenols using dichloroimidazolidinedione (DCID) as a new reagent for the activation of C–O bonds has been developed for the first time.

An investigation of palladium-catalyzed Stille-type cross-coupling of nitroarenes in perylenediimide series.

We report herein an unprecedented palladium-catalyzed cross-coupling reaction between mononitro-perylenediimide (PDI) and various arylstannanes. Optimized conditions developed with this Stille-type reaction allow the grafting of (hetero)aryls of various electronic nature in the bay region of PDIs. Moreover, we capitalized on the high selectivity of this cross-coupling through the desymmetrization of the dinitro-PDI substrate.

Pd-catalyzed C-C and C-N cross-coupling reactions in 2-aminothieno[3,2-d]pyrimidin-4(3H)-one series for antiplasmodial pharmacomodulation.

In 2015, we identified gamhepathiopine (M1), a 2-tert-butylaminothieno[3,2-d]pyrimidin-4(3H)-one antiplasmodial hit targeting all development stages of the human malarial parasite P. falciparum. However, this hit compound suffers from sensitivity to hepatic oxidative metabolism. Herein, we describe the synthesis of 33 new compounds in the 2-aminothieno[3,2-d]pyrimidin-4(3H)-one series modulated at position 6 of this scaffold. The modulations were performed using three palladium-catalyzed cross coupling reactions, namely Suzuki–Miyaura, Sonogashira, and Buchwald–Hartwig. For the latter, we developed the reaction conditions. Then, we evaluated the synthesized compounds for their antiplasmodial activity on the K1P. falciparum strain and their cytotoxicity on the human HepG2 cell line. Although we did not obtain a compound better than M1 in terms of the antiplasmodial activity, we identified compound 1g bearing a piperidine at position 6 of the thieno[3,2-d]pyrimidin-4(3H)-one ring with an improved cytotoxicity and metabolic stability. 1g is an interesting new starting point for further pharmacomodulation studies. This study also provides valuable antiplasmodial SAR data regarding the nature of the ring at position 6, the possible substituent on this ring, and the introduction of a spacer between this ring and the thienopyrimidinone moiety.