Paddlewheel Metal Organic Framework Research Articles

Engineering a Cu-Pd Paddle-Wheel Metal-Organic Framework for Selective CO2 Electroreduction.

Optimizing the binding energy between the intermediate and the active site is a key factor for tuning catalytic product selectivity and activity in the electrochemical carbon dioxide reduction reaction. Copper active sites are known to reduce CO2 to hydrocarbons and oxygenates, but suffer from poor product selectivity due to the moderate binding energies of several of the reaction intermediates. Here, we report an ion exchange strategy to construct Cu-Pd paddle wheel dimers within Cu-based metal-organic frameworks (MOFs), [Cu3-xPdx(BTC)2] (BTC=benzentricarboxylate), without altering the overall MOF structural properties. Compared to the pristine Cu MOF ([Cu3(BTC)2], HKUST-1), the Cu-Pd MOF shifts CO2 electroreduction products from diverse chemical species to selective CO generation. In situ X-ray absorption fine structure analysis of the catalyst oxidation state and local geometry, combined with theoretical calculations, reveal that the incorporation of Pd within the Cu-Pd paddle wheel node structure of the MOF promotes adsorption of the key intermediate COOH* at the Cu site. This permits CO-selective catalytic mechanisms and thus advances our understanding of the interplay between structure and activity toward electrochemical CO2 reduction using molecular catalysts.

Synthesis of NiZn-based paddle-wheel metal-organic framework and its use as a catalytic precursor for ethylene dimerization

A bimetallic pillared-layered MOF based on Ni and Zn with improved catalytic activity was synthesized and applied in the ethylene oligomerization reaction. According to the XANES spectra, the MOF possesses Ni in the 2+ oxidation state, a well-known active catalytic precursor in oligomerization systems. In addition, Ni and Zn oxide or metallic species were not identified, indicating the absence of impurity phases. µ-XRF and SEM-EDS techniques showed the homogeneous distribution of Ni and Zn species across the SBUs of the bimetallic MOF. Ni/Zn-MOF was applied in the ethylene oligomerization reaction using EASC as the co-catalyst, and the results were compared to its monometallic counterpart Ni-MOF. The bimetallic material Ni/Zn-MOF obtained a TOF corresponding to 135 ×103 h−1, which accounts for a 60 % increase in the catalytic activity achieved by Ni-MOF (85 ×103 h−1) under 15 bar of ethylene in a Parr reactor. Moreover, the results obtained in this work are remarkable compared to literature reports for Ni-based MOFs, demonstrating that the co-catalyst employed plays an important role in the catalytic activity. However, Ni/Zn-MOF showed a lower selectivity to α-C4 oligomers (36 %) against 58 % obtained by Ni-MOF. According to the reuse tests conducted, the bimetallic MOF can be reused for up to two reactions (under 5 bar ethylene in a glass reactor), although presenting a considerable loss in activity due to the formation of metallic Ni.

Hetero-Bimetallic Paddlewheel Complexes for Enhanced CO2 Reduction Selectivity: A First Principles Study

The reduction of carbon dioxide (CO2) into value-added feedstock materials, fine chemicals, and fuels represents a crucial approach for meeting contemporary chemical demands while reducing dependence on petrochemical sources. Optimizing catalysts for the CO2 reduction reaction can entail employing first principles methods to identify catalysts possessing desirable attributes, including the ability to form diverse products, selectively form few products, or exhibit favorable reaction kinetics. In this study, we investigate the CO2 reduction reaction on bimetallic Cu paddlewheel complexes, aiming to understand the impact metal substitution with Mn, Co, or Ni has on bimetallic paddlewheel metal-organic frameworks (MOFs). Substituting one of the Cu sites of the paddlewheel complex with Mn results in a more catalytically active Cu center, poised to produce substantial quantities of formic acid (HCOOH) and minor quantities of methane (CH4) with a suppressed production of C2 products such as ethanol (CH3CH2OH) or ethylene (C2H4). Moreover, the presence of Mn significantly reduces the limiting potential for CO2 reduction from 2.22 eV on the homo-bimetallic Cu paddlewheel complex to 1.19 eV, thereby necessitating a smaller applied potential. Conversely, within the Co-substituted paddlewheel complex, the Co site emerges as the primary catalytic center, selectively yielding CH4 as the sole reduced CO2 product, with a limiting potential of 1.22 eV. Notably, the Co site faces substantial competition from H2 production, attributed to a lower limiting potential of 0.81 eV for hydrogen reduction. Our examination of the Cu-Ni paddlewheel complex, featuring a Ni substituent site, reveals two catalytically active centers, each promoting distinct reductive processes. Both the Ni and Cu sites exhibit a propensity for HCOOH formation, with the Ni site favoring further reduction to CH4, while the Cu site directs the reaction towards methanol (CH3OH) production. The significance of this study lies in its potential to inform and streamline future experimental efforts, facilitating the synthesis and evaluation of novel catalysts with superior capabilities for CO2 reduction.

Computational Study of Ground-State Destabilization Effects and Dipole-Dipole Interaction Energies in Amphidynamic Crystals.

Ground-state destabilization is a promising strategy to modulate rotational barriers in amphidynamic crystals. Density functional theory studies of polar phenylenes installed as rotators in pillared paddle-wheel metal organic frameworks were performed to investigate the effects of ground-state destabilization on their rotational dynamics. We found that as the steric size of phenylene substituents increases, the ground-state destabilization effect is also increased. Specifically, a significant destabilization of the ground-state energy occurred as the size of the substituents increased, with values ranging from 2 to 11.7 kcal/mol. An evaluation of the effects of substituents on dipole-dipole interaction energies and rotational barriers suggests that it should be possible to engineer amphidynamic crystals where the dipole-dipole interaction energy becomes comparable to the rotational barriers. Notably, while pure dipole-dipole interaction energies reached values ranging from 0.6 to 2.4 kcal/mol, the inclusion of electronic and steric effects can alter dipolar orientations to significantly greater values. We propose that careful selection of polar substituents with different sizes may help create temperature-responsive materials with switchable collective polarization.

Direct Synthesis of Mixed-Metal Paddle-Wheel Metal-Organic Frameworks with Controlled Metal Ratios under Ambient Conditions.

Currently, synthesizing mixed-metal metal-organic frameworks (MM-MOFs) in a single step remains a challenge due to the varying reactivities of different metal cations. This often results in the formation of mixtures of monometallic MOFs or MM-MOFs with nonstoichiometric metal ratios. A promising approach to overcoming this issue is the controlled precursor method, which uses prebuilt polynuclear complexes with structures similar to the secondary building units (SBUs) of the desired MOFs. In this study, we report that metal acetates can serve as natural prebuilt SBUs, enabling the controlled synthesis of MBDs ([M2(BDC)2DABCO]n, M = metal, BDC = 1,4-benzenedicarboxylic acid, DABCO = 1,4-diazabicyclo[2,2,2]octane) under ambient conditions. By exploiting the fact that metal acetates readily form soluble paddle-wheel dimers similar to the SBUs of MBDs, we achieve the direct synthesis of mixed-metal MBDs at room temperature. The metal ratios (Zn, Co, and Ni) in the resulting MBDs are controllable, and the production yields exceed 90%. The use of metal acetates facilitates the fast and uniform nucleation of MBDs, regardless of the metal cations involved. This similarity in nucleation rates leads to the formation of bimetallic and trimetallic MBDs with predefined metal ratios and homogeneous metal distribution while maintaining the quality of the MOFs. Importantly, this strategy offers an efficient pathway for synthesizing mixed metal MBDs using stoichiometric amounts of metal salts without toxic additives, high energy consumption, and complex synthesis steps.

In situ micropillar compression of an anisotropic metal-organic framework single crystal

Understanding of the complex mechanical behavior of metal-organic frameworks (MOF) beyond their elastic limit will allow the design of real-world applications in chemical engineering, optoelectronics, energy conversion apparatus, and sensing devices. Through in situ compression of micropillars, the uniaxial stress-strain curves of a copper paddlewheel MOF (HKUST-1) were determined along two unique crystallographic directions, namely the (100) and (111) facets. We show strongly anisotropic elastic response where the ratio of the Young’s moduli are E(111) ≈ 3.6 × E(100), followed by extensive plastic flows. Likewise, the yield strengths are considerably different, in which Y(111) ≈ 2 × Y(100) because of the underlying framework anisotropy. We measure the fracture toughness using micropillar splitting. While in situ tests revealed differential cracking behavior, the resultant toughness values of the two facets are comparable, yielding Kc ~ 0.5 MPasqrt{{{{{{rm{m}}}}}}}. This work provides insights of porous framework ductility at the micron scale under compression and failure by bonds breakage.

Dicopper(II) paddle-wheel metal-organic frameworks for high propyne storage under ambient conditions.

Fluorinated dicopper(II) metal-organic framework JXNU-16F with 1,3,5-tri(3,5-bifluoro-4-carboxyphenyl)benzene ligands and nonfluorinated JXNU-16 exhibit high propyne uptakes of 443 and 496 cm3 g-1 under ambient conditions, respectively. Their remarkable propyne uptakes result from suitable pore spaces and strong propyne⋯propyne interactions amongst the adsorbed propyne molecules, as revealed by computational simulations.

Crystalline hydrogen bonding of water molecules confined in a metal-organic framework

Hydrogen bonding (H-bonding) of water molecules confined in nanopores is of particular interest because it is expected to exhibit chemical features different from bulk water molecules due to their interaction with the wall lining the pores. Herein, we show a crystalline behavior of H-bonded water molecules residing in the nanocages of a paddlewheel metal-organic framework, providing in situ and ex situ synchrotron single-crystal X-ray diffraction and Raman spectroscopy studies. The crystalline H-bond is demonstrated by proving the vibrational chain connectivity arising between hydrogen bond and paddlewheel Cu−Cu bond in sequentially connected Cu–Cu·····coordinating H2O·····H-bonded H2O and by proving the spatial ordering of H-bonded water molecules at room temperature, where they are anticipated to be disordered. Additionally, we show a substantial distortion of the paddlewheel Cu2+-centers that arises with water coordination simultaneously. Also, we suggest the dynamic coordination bond character of the H-bond of the confined water, by which an H-bond transitions to a coordination-bond at the Cu2+-center instantaneously after dissociating a previously coordinated H2O.

A New Electrically Conducting Metal-Organic Framework Featuring U-Shaped cis-Dipyridyl Tetrathiafulvalene Ligands.

A new electrically conducting 3D metal-organic framework (MOF) with a unique architecture was synthesized using 1,2,4,5-tetrakis-(4-carboxyphenyl)benzene (TCPB) a redox-active cis-dipyridyl-tetrathiafulvalene (Z-DPTTF) ligand. While TCPB formed Zn2(COO)4 secondary building units (SBUs), instead of connecting the Zn2-paddlewheel SBUs located in different planes and forming a traditional pillared paddlewheel MOF, the U-shaped Z-DPTTF ligands bridged the neighboring SBUs formed by the same TCPB ligand like a sine-curve along the b axis that created a new sine-MOF architecture. The pristine sine-MOF displayed an intrinsic electrical conductivity of 1 × 10−8 S/m, which surged to 5 × 10−7 S/m after I2 doping due to partial oxidation of electron rich Z-DPTTF ligands that raised the charge-carrier concentration inside the framework. However, the conductivities of the pristine and I2-treated sine-MOFs were modest possibly because of large spatial distances between the ligands that prevented π-donor/acceptor charge-transfer interactions needed for effective through-space charge movement in 3D MOFs that lack through coordination-bond charge transport pathways.

Exploitation of a Zn(II) paddle wheel metal-organic framework as effective sorbent for the quantitative estimation of cationic and anionic dyes

A Zn(II) bearing two-dimensional (2D) metal–organic framework (MOF) of [Zn2(muco)2(4-nvp)2]·CH3OH (1) has been prepared at room temperature by slow diffusion method. The prepared MOF has been structurally characterized by single crystal X-ray diffraction (SCXRD) technique. The compound 1 constructs a three-dimensional (3D) supramolecular network by the combination of hydrogen bonding and π···π interactions. Hirshfeld surface analysis has also been carried out to investigate the impact of non-covalent interactions in crystal packing. Furthermore, the synthesized compound 1 has been exploited as effective sorbent for the spectrophotometric estimation of cationic and anionic dyes namely, Rhodamin–B (RDB), Rose Bengal (RB) and Eosine-Y (EY). The maximum absorbances (λ max) of the compound 1with above dyes were measured at 553 nm, 550 nm and 516 nm respectively. The dye RDB follows Beer-Lambert law in the concentration range of 1.0–6.0 μg/mL with correlation coefficient of 0.980; RB follows in the concentration range of 2.4 × 10−4–1.21 × 10−3 μg/mL with correlation coefficient of 0.999 and EY follows in the concentration range of 0.4–3.0 μg/mL with correaltion coefficient of 0.999. After sorption of dyes, MOF 1 shows a drastic change in its εmax value. The developed method has the potential to be applied for quantitative estimation of the dyes in the real sample analysis.

Hydrogen-Bonding Linkers Yield a Large-Pore, Non-Catenated, Metal-Organic Framework with pcu Topology.

Pillared paddle-wheel-based metal-organic framework (MOF) materials are an attractive target as they offer a reliable method for constructing well-defined, multifunctional materials. A drawback of these materials, which has limited their application, is their tendency to form catenated frameworks with little accessible volume. To eliminate this disadvantage, it is necessary to investigate strategies for constructing non-catenated pillared paddle-wheel MOFs. Hydrogen-bonding substituents on linkers have been postulated to prevent catenation in certain frameworks and, in this work, we present a new MOF to further bolster this theory. Using 2,2′-diamino-[1,1′-biphenyl]-4,4′-dicarboxylic acid, BPDC-(NH2)2, linkers and dipyridyl glycol, DPG, pillars, we assembled a MOF with pcu topology. The new material is non-catenated, exhibiting large accessible pores and low density. To the best of our knowledge, this material constitutes the pcu framework with the largest pore volume and lowest density. We attribute the lack of catenation to the presence of H-bonding substituents on both linkers.

Multitechnique Analysis of the Hydration in Three Different Copper Paddle-Wheel Metal–Organic Frameworks

The structural instability in a humid environment of the majority of metal–organic frameworks (MOFs) is a challenging obstacle for their industrial-scale development. Recently, two water-resistant MOFs have been synthetized, STAM-1 and STAM-17-OEt. They both contain copper paddle wheels, like the well-known water-sensitive HKUST-1, but different organic linkers. The crystal lattice of both the MOFs undergoes a phase transition upon interaction with water molecules. Their unusual flexibility allows the controlled breaking of some interpaddle wheel Cu–O interactions in the so-called crumple zones, with a mechanism called hemilability, which is considered to have a crucial role for the stability toward water. In this work, we present a detailed investigation on the different effects of water exposure on the local and long-range structures of HKUST-1, STAM-1, and STAM-17-OEt. Electron paramagnetic resonance (EPR) spectroscopy has allowed us to characterize the different phases occurring during hydration of ea...

Increasing Alkyl Chain Length in a Series of Layered Metal-Organic Frameworks Aids Ultrasonic Exfoliation to Form Nanosheets.

Metal–organic framework nanosheets (MONs) are attracting increasing attention as a diverse class of two-dimensional materials derived from metal–organic frameworks (MOFs). The principles behind the design of layered MOFs that can readily be exfoliated to form nanosheets, however, remain poorly understood. Here we systematically investigate an isoreticular series of layered MOFs functionalized with alkoxy substituents in order to understand the effect of substituent alkyl chain length on the structure and properties of the resulting nanosheets. A series of 2,5-alkoxybenzene-1,4-dicarboxylate ligands (O2CC6H2(OR)2CO2, R = methyl–pentyl, 1–5, respectively) was used to synthesize copper paddle-wheel MOFs. Rietveld and Pawley fitting of powder diffraction patterns for compounds Cu(3–5)(DMF) showed they adopt an isoreticular series with two-dimensional connectivity in which the interlayer distance increases from 8.68 Å (R = propyl) to 10.03 Å (R = pentyl). Adsorption of CO2 by the MOFs was found to increase from 27.2 to 40.2 cm3 g–1 with increasing chain length, which we attribute to the increasing accessible volume associated with increasing unit-cell volume. Ultrasound was used to exfoliate the layered MOFs to form MONs, with shorter alkyl chains resulting in higher concentrations of exfoliated material in suspension. The average height of MONs was investigated by AFM and found to decrease from 35 ± 26 to 20 ± 12 nm with increasing chain length, with the thinnest MONs observed being only 5 nm, corresponding to five framework layers. These results indicate that careful choice of ligand functionalities can be used to tune nanosheet structure and properties, enabling optimization for a variety of applications.

An investigation of paddle wheel Cu2(μ2-O2CCH3)4 for gas molecule adsorptions

Metal organic frameworks (MOFs) have been well-known and extensively researched due to the high storage /good selectivity for gas molecules. Herein, the structures and electron paramagnetic resonance (EPR) spectra for dicopper paddle wheel MOF compound (Cu2(µ2-O2CCH3)4 with various gas molecule are theoretically investigated by density functional theory (DFT) calculations. The adsorption energies and isotherms (including pure gas molecules and the mixed ones) are calculated for the gas molecules interacting with the unsaturated Cu2(µ2-O2CCH3)4. Both quantities exhibit the roughly consistent orders (e.g. H2S > NH3 > CO2 > CO > H2O > N2 > NO > H2 for isotherms and H2S > NH3 > N2 > CO2 > NO > H2O > H2 > CO for adsorption energies), possibly suggesting that this material may act as a potential adsorbent of these gas molecules. The catalytic property of Cu2(µ2-O2CCH3)4 for oxidation of CO and NO into non-toxic molecules and splitting of H2O into H2 and O2 in the solvent condition are uniformly discussed. Simulation of Grand Canonical Monte Carlo (GCMC) in MS 8.0 and calculations in Langmuir model reveal that Cu2(µ2-O2CCH3)4 has good selectivity for CH4 in natural gas (CH4/CO2/N2) and SO2 in fog (SO2/NO/NO2/H2O/O2), which would exhibit potential environmentally friendly applications.

Coordinative Reduction of Metal Nodes Enhances the Hydrolytic Stability of a Paddlewheel Metal-Organic Framework.

Enhancement of hydrolytic stability of metal-organic frameworks (MOFs) is a challenging issue in MOF chemistry because most MOFs have shown limitations in their applications under a humid environment. Meanwhile, inner sphere electron transfer has constituted one of the most intensively studied subjects in contemporary chemistry. In this report, we show, for the first time, a new conceptual coordinative reduction of Cu2+ ion, which is realized in a paddlewheel MOF, HKUST-1, with a postsynthetic manner via inner sphere "single" electron transfer from hydroquinone (H2Q) to Cu2+ through its coordination bond. H2Q treatment of HKUST-1 under anhydrous conditions leads to the single charge (1+) reduction of approximately 30% of Cu2+ ions. Thus, this coordinative reduction is an excellent reduction process to be self-controlled in both oxidation state and quantity. As described below, once Cu2+ ions are reduced to Cu+, the reduction reaction does not proceed further, in terms of their oxidation state as well as their amount. Also, we demonstrate that a half of the Cu+ ions (about 15%) remains in paddlewheel framework with pseudo square planar geometry and the other half of the Cu+ ions (about 15%) forms [Cu(MeCN)4]+ complex in a small cage in the fashion of a ship-in-a-bottle after dissociation from the framework. Furthermore, we show that the coordinative reduction results in substantial enhancement of the hydrolytic stability of HKUST-1 to the extent that its structure remains intact even after exposure to humid air for two years.

Highly Porous Nanocrystalline UiO-66 Thin Films via Coordination Modulation Controlled Step-by-Step Liquid-Phase Growth

Metal–organic frameworks (MOFs) possess exciting properties, which can be tailored by rational material design approaches. Integration of MOFs in functional nano- and mesoscale systems require selective crystallite positioning and thin-film growth techniques. Stepwise layer-by-layer liquid-phase epitaxy (LPE) emerged as one of the methods of choice to fabricate MOF@substrate systems. The layer-by-layer approach of LPE allows a precise control over the film thickness and crystallite orientation. However, these advantages were mostly observed in cases of tetra-connected dinuclear paddle-wheel MOFs and Hoffmann-type MOFs. Higher connected MOFs (consisting of nodes with 8–12 binding sites), such as the Zr-oxo cluster based families, are notoriously hard to deposit in an acceptable quality by the stepwise liquid-phase process. Herein, we report the use of coordination modulation (CM) to assist and enhance the LPE growth of UiO-66, Zr6O4(OH)4(bdc)6 (bdc2– = 1,4-benzene-dicarboxylate) films. Highly porous and cr...

Two Self-Interpenetrating Copper(II)-Paddlewheel Metal–Organic Frameworks Constructed from Bifunctional Triazolate–Carboxylate Linkers

From the perspective of preset configuration of ligands, the introduction of triazole would be not only conducive to furnish sites rich in nitrogen, but also favorable to enhance the stability of MOF materials. Through employing two similar bifunctional triazolate–carboxylate organic ligands, two novel self-interpenetrating copper(II)-based metal–organic frameworks have been successfully constructed under solvothermal conditions, which exhibit very similar voids but different hole shapes. In addition, powder X-ray diffraction, thermogravimetry, gas sorption studies, and theoretical calculations reveal their different framework stabilities and pore environment.

Nickel Based Paddle-Wheel Metal–Organic Frameworks Towards Adsorption of O3 and SO2 Molecules: Quantum-Chemical Calculations

In this study, the interaction of O3 and SO2 molecules on the surface of nickel center open metal site (Ni-OMS) of Ni-paddle-wheel units (Ni2 (O2CL)4 [L=–CH3, –C6H5, and –CN)] has been investigated using density functional theory (DFT). We found important impacts of different linked functional groups towards O3 and SO2 molecules adsorption on Ni-OMS. While adsorption of O3 on Ni-OMS linked by different groups varies as C6H5 > CH3 > CN, different order (CN > C6H5 > CH3) is found for SO2 adsorption. As a result, charge allocation of Ni atom in Ni-OMS depends on the kind of linked group as well as type of adsorbate. For all systems, the changes in the electronic structure of Ni-OMS upon adsorption of above-mentioned molecules were followed by taking into account the optimized geometry, charge transfer, dipole moment, frontier molecular orbitals, and density of states. Our results confirm possibility of designing selective sensor/adsorbent by change in the kind of linked group within Ni-OMS.

A Copper(II)-Paddlewheel Metal-Organic Framework with Exceptional Hydrolytic Stability and Selective Adsorption and Detection Ability of Aniline in Water.

Copper(II)-paddlewheel-based metal-organic frameworks (CP-MOFs) represent a unique subclass of MOFs with highly predictable porous structures, facile syntheses, and functional open metal sites. However, the lack of high hydrolytic stability is an obstacle for CP-MOFs in many practical applications. In this work, we report a new CP-MOF, [Cu4(tdhb)] (BUT-155), which is constructed from a judiciously designed carboxylate ligand with high coordination connectivity (octatopic), abundant hydrophobic substituents (six methyl groups), and substituent constrained geometry (tetrahedral backbone), tdhb8- [H8tdhb = 3,3',5,5'-tetrakis(3,5-dicarboxyphenyl)-2,2',4,4',6,6'-hexamethylbiphenyl)]. BUT-155 shows high porosity with a Brunauer-Emmett-Teller surface area of 2070 m2/g. Quite interestingly, this CP-MOF retains its structural integrity after being treated in water for 10 days at room temperature or in boiling water for 24 h. To the best of our knowledge, BUT-155 represents the first CP-MOF that is demonstrated to retain its structural integrity in boiling water. The high hydrolytic stability of BUT-155 allowed us to carry out adsorption studies of water vapor and aqueous organic pollutants on it. Water-vapor adsorption reveals a sigmoidal isotherm and a high uptake (46.7 wt %), which is highly reversible and regenerable. In addition, because of the availability of soft-acid-type open Cu(II) sites, BUT-155 shows a high performance for selective adsorption of soft-base-type aniline over water or phenol, and a naked-eye detectable color change for the MOF sample accompanies this. The adsorption selectivity and high adsorption capacity of aniline in BUT-155 are also well-interpreted by single-crystal structures of the water- and aniline-included phases of BUT-155.

Dermal thiram exposure of workers in rubber industry

A non-catenated nickel (II) pillared paddlewheel metal-organic framework is synthesized through a combination of solvent-assisted linker exchange and transmetallation. Compared to its isostructural Zn(II) analogue, the nickel (II) pillared paddlewheel metal-organic framework features an enhanced N2 sorption performance. It is notable that the nickel (II)-based metal-organic framework could not (in our hands) be synthesized de novo. The experimental results validate that multiple building-block-replacement (BBR) methods can be utilized to access materials that are challenging to synthesize directly.