Packaging Components Research Articles

Result lexicalization with manner verbs in French: an experimental investigation of the material/product alternation and the packaging of meaning

Abstract French is a typical verb-framed language, in which manner verbs cannot freely combine with result-denoting constituents in a single VP. Drawing on experimentally elicited production data on Hexagonal French, this study examines how the syntactic (in)flexibility of manner-of-creation verbs influences the lexicalization of the event result. As for result lexicalization within the VP headed by the manner verb, the study explores the occurrence of effected objects and resultative PPs. Thus, it addresses the availability of the material/product alternation (sculpter une poupée à partir du bois/sculpter le bois en (une) poupée) as a type of argument alternation, whose existence has been questioned for the Romance languages. Furthermore, it is explored how the verbs’ syntactic flexibility influences whether manner and result are lexicalized within a single VP at all or distributed onto different VPs. The results show that the material/product alternation does occur, but that only a limited set of verbs has the syntactic flexibility required for it. Additionally, it is shown that syntactic flexibility favors a denser packaging of conceptual components, since with verbs that admit an effected object, the result is realized more often in the VP than with verbs that do not.

Paper waste and carbon emissions from oral contraceptive leaflets.

Oral contraceptives (OC) are the most used form of contraception among women in the U.S. and Europe. Like other medications, their packaging must include patient information leaflets. This study quantifies the environmental impact of paper waste generated by these leaflets. We conducted an observational analysis, measuring the weight of leaflets, pills, and packaging components across various OC brands. Significant variations in leaflet weights were observed. On average, leaflets accounted for 55% of the package weight, while pills and blister dispensers represented only 32%. The mean weight of OC leaflets was 12.3 ± 5.5 grams (4.7-21.9 grams), leading to an estimated annual paper waste of 6,118.4 tons, 5,763.5 tons of carbon dioxide equivalent emissions, and the use of approximately 146,841 trees for production. Standardizing leaflet weight to the lightest reported can reduce annual waste by 3780.5 tons of paper. This study highlights the substantial environmental cost of the waste generated from OC leaflets and proposes practical strategies to mitigate waste, including electronic leaflets and standardized packaging. Targeting these materials presents a significant opportunity to enhance sustainability, aligning with global efforts to reduce greenhouse gas emissions from the healthcare sector.

Finite element analysis of 2.5D packaging processes based on multi-physics field coupling for predicting the reliability of IC components

The 2.5D packaging technology is a high–performance method for electronic packaging. This study addresses the reliability issues of 2.5D packaging during the manufacturing process. A multi–physics field coupling Finite Element Method (FEM) has been developed, combined with sub–modeling techniques, to investigate the curing of underfill adhesive, the curing of Epoxy Molding Compound (EMC), and the reflow soldering between the interposer and substrate in a 2.5D packaging entity during various manufacturing procedures. The focus is on the thermo–mechanical–chemical behavior of viscoelastic components within the packaging structure, as well as the viscoplastic characteristics of the micro solder balls and microbumps. A systematic analysis is conducted on the warpage deformation and stress distribution of the 2.5D packaging at crucial time points. The results demonstrate that after curing, the overall warpage of the packaging exhibits a ‘concave’ warpage profile. Additionally, as the thickness of the EMC above the chip increases, the warpage value of the packaging also increases. The warpage value defined by linear elasticity is larger than that defined by viscoelasticity. The maximum Von Mises stress value in the key areas of the submodel is greater than the maximum Von Mises stress value in the corresponding key areas of the global model. After reflow soldering, the stress concentration in the micro solder balls occurs at the edge of the micro solder ball array. The maximum stress values for each component of the packaging are observed in the interface areas between the components. Packaging components that undergo the curing process have notably higher warpage and Von Mises stress values than those that do not undergo the curing process. The simulation method established in this study can accurately predict the warpage deformation and stress distribution state of 2.5D packaging, providing significant engineering application value for process optimization and reliability enhancement of 2.5D packaging in the production process.

Estimating the weight of consumed tobacco product waste in various Indian states: a novel method to assess the potential burden of tobacco product waste

IntroductionThe direct morbidity and mortality caused by tobacco are well documented, but such products also contribute to a range of environmental pollutants resulting from tobacco product waste. No previous studies...

Co-immobilization of lipase and β-galactosidase in gelatin-carboxymethyl cellulose blend films used as an active packaging component

β-Galactosidase and lipase were co-immobilized in polymeric blends of gelatin (GEL) and carboxymethyl cellulose (CMC) synthesized with different ratios of GEL/CMC: A (0GEL:100CMC), B (25GEL:75CMC), C (50GEL:50CMC), D (75GEL:25CMC), E (100GEL:0CMC). The films obtained good electrostatic interaction and a regular and uniform structure. The addition of CMC increased the mechanical resistance of the films, the tensile strength being 35.04 ± 0.10 MPa for A (0GEL:100CMC) films and 19.17 ± 2.44 MPa for E (100GEL:0CMC) films. Thermogravimetry (TG) showed that the addition of the enzyme decreases the thermal stability of the films. Film B (25GEL:75CMC) showed greater affinity with the added enzymes and greater thermal stability, in addition to increasing the crystallinity by up to 5.8 % and forming more transparent films. CMC was the most hydrophilic polymer, with higher moisture content (17.35 ± 1.73 %) and PVA (0.398 ± 0.047 g.mm/h.m2.kPa), higher still after the addition of enzyme (22.91 ± 1.06 % and 1.136 ± 0.087 g.mm/h.m2.kPa). The enzymes showed greater interaction with the bulky groups of CMC and the film with the highest concentration of this polymer was the one that presented the best hydrolysis rate of lactose and triglycerides, enabling the production of films.

Nano Innovation: Enhancing Food Packaging through Nanotechnology

The utilization of nanotechnology in developing novel packaging components has grown significantly in recent years, and it is anticipated to have a significant influence on the food industry shortly. It offers to produce food packaging with improved qualities that will assist food goods in lasting longer on the shelf. The present article comprehensively discusses the nanoparticles commonly used in food packaging, the significant changes they bring to the qualities of the material, and the commercially available packaging materials based on nanotechnology. This review primarily focuses on using nanotechnologies in food processing and packaging, explicitly examining their impact on food quality and safety. To comprehend the function of enhanced, active, and antimicrobial packaging in food packaging. The utilization of nanotechnology in food products has experienced a significant surge in popularity in both developed and developing nations. The review was obtained from searches conducted on academic databases such as Sci-Hub, Google Scholar, PubMed, etc. Collected data from many sources has been compiled and presented here to facilitate further research on the application of nanotechnology in food packaging. In the current review, we also discussed the different organic and inorganic nanomaterials. The article also discusses consumer health and safety concerns, highlighting the significance of thorough safety assessments and clear communication. Nanotechnology has numerous uses in diverse areas of food technology. This analysis examines the potential of nanotechnology to improve the quality and safety of packaged food. Nanotechnology in food packaging is highly encouraging, providing substantial advantages in terms of food preservation, safety, and sustainability. This paper offers a thorough examination of present trends, technological progress, and future predictions to provide a full understanding of how nanotechnology can fundamentally transform food packaging. This transformation will enable the development of creative, environmentally friendly, and more secure food systems.

Effect of filer content on the thermal characteristics of underfill materials for Ball-Grid-Array component package

High-density integration and fast processing speed in the semiconductor industry have increased heat generation in electronic devices. Underfill materials, known for their high thermal conductivity and low coefficient of thermal expansion (CTE), offer a potential solution to dissipate heat and improve device reliability. In this study, we investigate the effect of filler content on the thermal reliability of underfill materials for ball grid array (BGA) component packaging. Mainly, we investigate the thermal conductivity, CTE, and mechanical properties of different filler contents of Al2O3 and Al2O3–BN hybrid underfills to facilitate heat dissipation and improve device reliability. The thermal conductivity of the underfill materials was evaluated by measuring the surface temperatures of underfill molded flip-chip light-emitting diodes (FCLEDs). The mechanical properties and thermo-mechanical reliability of the underfill materials were evaluated via a three-point bending test of the underfill packaged BGA components after the thermal shock test. The results showed that optimizing underfill properties based on specific application environments is crucial for obtaining enhanced thermal reliability and mechanical properties of underfill packaged BGA components.

Preferences for Delivery of HIV Prevention Services Among Healthcare Users in South Africa: A Discrete Choice Experiment.

Progress has been made to scale oral pre-exposure prophylaxis (PrEP) as part of combination HIV prevention, with the WHO recommending differentiated, simplified and demedicalized approaches. This study explored user preferences for components of a PrEP service delivery package, through a discrete choice experiment (DCE) among 307 people accessing primary healthcare services in South Africa between November 2022 and February 2023. Attributes included were: Source of information about HIV prevention and PrEP; Site for PrEP initiation and follow-up; Frequency of follow-up; PrEP pick-up point; HIV testing whilst using PrEP; Contact between appointments. A D-efficient DCE design was created with 16 choice sets in 2 blocks. DCE data were analysed using generalised multinomial logistic models. Compared to printed materials, participants preferred getting information about PrEP online (aOR = 7.73, 95% CI = 5.13-11.66) and through WhatsApp (aOR = 2.23, 95% CI = 0.98-5.55). PrEP initiation at a pharmacy or mobile clinic was valued equally to initiating PrEP at a clinic, but a community pop-up site was less preferred (aOR = 0.46, 95% CI = 0.33-0.64). There was a preference for 6-monthly over 3-monthly follow-up (aOR = 11.88, 95% CI = 5.44-25.94). Participants preferred collecting PrEP from a pharmacy (aOR = 5.02, 95% CI = 3.45-7.31), through home delivery (aOR = 2.18, 95% CI = 1.26-3.78) and from a vending machine (aOR = 1.43, 95% CI = 1.02-1.99) relative to where they initiated PrEP. Participants also preferred HIV self-testing over a healthcare provider test (aOR = 5.57, 95% CI = 3.72, 8.36). WhatsApp or Facebook groups (aOR = 4.12, 95% CI = 3.00-5.67), monthly phone calls (aOR = 2.84, 95% CI = 1.73-4.67) and weekly messages (aOR = 1.47, 95% CI = 1.10-1.97) were preferred contact between appointments, relative to no contact. To meet users' preferences, there is a need to expand decentralised and self-led HIV prevention services.

Pretreatments for photoresist-patterned wafer to improve Cu pillar electrodeposition

Cu micropillars are essential components in the electronics packaging, basically connecting multiple chips. The pillars are fabricated by Cu electrodeposition that fills inside via holes formed through a photoresist (PR) layer. Unlike Damascene and TSV processes, the Cu seed layer is only opened at the bottom of via holes, while the rest of the wafer surface is covered by the PR. Therefore, additional pretreatments are required to improve the Cu electrodeposition process due to air bubbles entrapped inside PR holes, organic residues, and native oxide on Cu seed layers. This research systematically investigated the pretreatments for PR-patterned wafers. A humidifier, hot steam, and compressed water spray were assessed for surface hydration to remove air bubbles from the PR holes. Ethanol- and citric acid-based aqueous solutions were then applied to remove organic residues and native oxide from the surface of Cu seed layers. The advantages of these pretreatments were assessed by analyzing the quality of Cu electrodeposits, and the optimum methods and solutions for Cu pillar electrodeposition on the PR-patterned wafer were suggested.

Study of polymer component migrated in medicinal product from transportation packaging component: A systematic assessment beyond regulatory expectations

Light Density Polyethylene (LDPE) bottles with a specific resin were chosen as container closure system (CCS) to fill “Latanoprost ophthalmic solution” (a generic drug product). As an alternative packaging component, additional manufacturer of LDPE bottles with the same characteristics as the previously selected LDPE bottles was chosen. The appropriateness of both packaging components was evaluated using an extractables and leachable (E&L) study and a formal stability programme that monitored quality of latanoprost ophthalmic solution. The results of relevant quality attributes in stability samples of latanoprost ophthalmic solution packed in both LDPE bottles were compared. It noticed that an unknown impurity in latanoprost ophthalmic solution packaged in LDPE bottles manufactured by an additional manufacturer. Further study revealed that this unknown impurity is Epsilon-caprolactam, a leachable of plastic used in the transportation of LDPE bottles. The leachability was validated through an extraction analysis of a plastic bag used for transportation. Thus, in certain cases, when the source of leachable is not identifiable by an E&L examination of primary, secondary, and tertiary packaging components, the assessment could be extended to include packaging components utilized throughout the supply chain.

Optimization of laser-based glass frit bonding for optoelectronic packaging using response surface methodology

Laser-based glass frit bonding presents considerable advantages, including fast bonding speed and minimal thermal impact, showing significant application prospects in the packaging of temperature-sensitive optoelectronic devices. In this study, the individual effects of critical process parameters on bonding performance have been investigated through single-factor experiments. Response surface methodology is employed to design experiments systematically for the laser-based glass frit bonding process, focusing on exploring the interactive effects among these process parameters. The Box-Behnken design method is implemented for experimental setup, and a regression model has been developed to analyze the resulting data. Analysis of variance, 3D response surface plots, and contour plots are conducted to comprehensively evaluate the interaction effects of parameters on the bonding seam width and strength. The mathematical model is validated and an optimal combination of process parameters is identified, which significantly enhances the bonding quality. The optimized process parameters are also applied for the laser bonding of square-shaped seam to validate the feasibility of the optimized results and to promote the engineering application of glass laser-based glass frit bonding technology in microelectronic component packaging. Inspection of the bonded specimens shows excellent formation quality of the square-shaped bonding seams, confirming the methodology’s effectiveness in advancing optoelectronic packaging technology.

Thermal cycling characterization of an integrated low-inductance GaN eHEMT power module

To exploit the potential of wide-bandgap semiconductors in high-frequency applications, innovative packaging designs are developed to minimize the parasitic inductance of power modules. This study presents an integrated power module with a hybrid PCB/DBC structure, which uses top-side cooling prepackaged GaN enhancement-mode high-electron-mobility transistors. The module achieves a remarkably low parasitic inductance of 2.65 nH. However, there is relatively scarce research on the reliability of this heterostructure, particularly its sensitivity to thermomechanical stress due to the coefficients of thermal expansion mismatch among material interfaces. In this work, the thermal cycling characteristics of the integrated power module are comprehensively investigated. Electrical and thermal parameters were periodically and separately measured offline on a simplified package to monitor the health conditions and decouple possible synergy and competition effects among the failure modes from all packaging components. A thorough failure analysis was conducted using nondestructive visual inspections and scanning acoustic microscopy, complemented by destructive cross-sectional examination and scanning electron microscopy. The findings identified the delamination of the DBC upper copper layer, which exhibited a conchoidal fracture interface, as the primary factor that contributed to the failure of the power module with increased thermal resistance. Furthermore, the study dissected its initiation and propagation mechanisms. This investigation provides valuable insights for the development of more reliable low-inductance power module designs.

Impact of Tourist Experiences in Tour Packages on Intention to Repeat

This study quantitatively examines to identify the relationship between the overall tour package experience and repeat visitation and to analyse how specific components of a tour package influence tourists’ intentions to revisit. Data were collected via a structured questionnaire from 653 tourists who had previously travelled with tour packages, focusing on experience, perceived value, and overall experience. Statistical analyses, including correlation, regression, and factor analysis, revealed a significant relationship between tour package experience and intention to revisit. Key predictors of repeat visitation included the quality of accommodation, various activities, customer service, and perceived value. Correlation analysis showed that educational level, aesthetic appreciation, and prior experiences significantly influence repeat visit intentions. The regression model highlighted the positive impact of education (β = .339, p < .000), aesthetics (β = .434, p < .000), and repeat experiences (β = .114, p < .002) on the overall tour package experience, whereas entertainment and escapism had a negative impact. Factor analysis indicated that the tourist experience is multifaceted, with educational, aesthetic, and experiential factors contributing uniquely to overall satisfaction and repeat visitation. Tour operators and destination managers should enhance their packages’ educational and aesthetic aspects while ensuring high customer service and value for money to foster customer loyalty and encourage repeat visitation. This research provides valuable insights into the critical components of tour packages that drive repeat visitation and underscores the significance of comprehensive packages in promoting sustainable tourism development. Future research could explore the impact of digital and personalised tour packages on repeat visitation.

Chitosan-Based Films with Essential Oil Components for Food Packaging

Chitosan-based films show great potential in terms of application in food preservation and are also promising carriers of biologically active ingredients. This paper presents the potential use of chitosan-based films with the addition of essential oil components, e.g., carvacrol, eugenol, and isoeugenol, intended for food packaging. The characteristics of the obtained films were determined, including antibacterial, mechanical, barrier, and structural parameters. In addition, the antibacterial and antioxidant effects of the essential oil components were assessed. Eugenol (44.41%) and isoeugenol (43.56%) showed high antiradical activities, similar to the activity of Trolox (44.33%), which is used as a standard antioxidant. In turn, carvacrol was characterized by the strongest effect against the examined strains of bacteria, both Gram-positive and Gram-negative. The chitosan film with carvacrol showed the most valuable antibacterial and mechanical properties (tensile strength and elongation at break). The antibacterial activities of the chitosan–carvacrol films were higher than that of the carvacrol solution. The inhibition zones of the chitosan–carvacrol films were in the range 29–41 mm (except for Enterococcus faecalis, with an inhibition zone of 15 mm) compared to the inhibition zones of the carvacrol solution (28 mm). The results showed that chitosan is an effective carrier of fragrance compounds, mainly carvacrol. However, all the tested chitosan-based films with the addition of fragrance compounds showed appropriate parameters (biological, mechanical, and barrier), which makes them an ecological alternative to plastics intended for food packaging.

A comprehensive review on starch-based sustainable edible films loaded with bioactive components for food packaging

Biopolymers like starch, a renewable and widely available resource, are increasingly being used to fabricate the films for eco-friendly packaging solutions. Starch-based edible films offer significant advantages for food packaging, including biodegradability and the ability to extend shelf life. However, they also present challenges such as moisture sensitivity and limited barrier properties compared to synthetic materials. These limitations can be mitigated by incorporating bioactive components, such as antimicrobial agents or antioxidants, which enhance the film's resistance to moisture and improve its barrier properties, making it a more viable option for food packaging. This review explores the emerging field of starch-based sustainable edible films enhanced with bioactive components for food packaging applications. It delves into fabrication techniques, structural properties, and functional attributes, highlighting the potential of these innovative films to reduce environmental impact and preserve food quality. Key topics discussed include sustainability issues, processing methods, performance characteristics, and potential applications in the food industry. The review provides a comprehensive overview of current research and developments in starch-based edible films, presenting them as promising alternatives to conventional food packaging that can help reduce plastic waste and environmental impact.

Conceptualizing the Commercialization of Human Milk: A Concept Analysis.

Donor human milk is recommended when infants are unable to be fed their mother's own milk or require supplementation. For-profit companies use technologies to create human milk products for infants in the neonatal intensive care setting without consistent guidelines and regulatory frameworks in place. This commercialization of human milk is inadequately conceptualized and ill-defined. The aim of this study is to conceptualize and define the commercialization of human milk and discuss the need for policy guidelines and regulations. Using a concept analysis framework, we reviewed the literature on the commercialization of human milk, analyzed the antecedents and potential consequences of the industry, and developed a conceptual definition. The literature review resulted in 13 relevant articles. There has been a surge in the development and availability of human milk products for vulnerable infants developed by for-profit companies. Commercialized human milk can be defined as the packaging and sale of human milk and human milk components for financial gain. Factors contributing to the commercialization of human milk include an increased demand for human milk, and consequences include potential undermining of breastfeeding. The lack of guidelines and regulations raises concerns of equity, ethics, and safety. The industry is rapidly growing, resulting in an urgent need for consistent guidelines and regulatory frameworks. If left unaddressed, there could be potential risks for donor milk banking, the future of breastfeeding, and infant and maternal health.

Advancing LED technology: the FDCSP element’s breakthrough in mini and micro-LED packaging and backlight module enhancement

In this research, we introduce an advanced methodology for the calculation of bulk light sources tailored for free-form surface design, focusing on the principle of energy conservation. This method is especially relevant for the evolving needs of micro-LED packaging, highlighting its potential in this burgeoning field. Our work includes the development of an algorithm for creating freeform-designed chip-scale package (FDCSP) components. These components seamlessly integrate LEDs and lenses, underscoring our commitment to advancing free-form surface design in chip-level packaging. By adhering to the principle of energy conservation, our approach facilitates a meticulous comparison of simulation outcomes with predefined target functions. This enables the iterative correction of discrepancies, employing layering techniques to refine the design until the simulated results closely align with our goals, as demonstrated by an appropriate difference curve. The practical application of these simulations leads to the innovative design of FDCSP devices. Notably, these devices are not just suitable for traditional applications in backlight modules but are explicitly optimized for the emerging sector of micro-LED packaging. Our successful demonstration of these FDCSP devices within backlight modules represents a significant achievement. It underscores the effectiveness of our design strategy and its expansive potential to transform micro-LED packaging solutions. This research not only contributes to the theoretical understanding of energy conservation in lighting design but also paves the way for groundbreaking applications in micro-LED and backlight module technologies.

Influence of Normal-to-High Anodizing Voltage on AAO Surface Hardness from 1050 Aluminum Alloy in Oxalic Acid.

Anodic aluminum oxide (AAO) has been widely applied for the surface protection of electronic component packaging through a pore-sealing process, with the enhanced hardness value reaching around 400 Vickers hardness (HV). However, the traditional AAO fabrication at 0~10 °C for surface protection takes at least 3-6 h for the reaction or other complicated methods used for the pore-sealing process, including boiling-water sealing, oil sealing, or salt-compound sealing. With the increasing development of nanostructured AAO, there is a growing interest in improving hardness without pore sealing, in order to leverage the characteristics of porous AAO and surface protection properties simultaneously. Here, we investigate the effect of voltage on hardness under the same AAO thickness conditions in oxalic acid at room temperature from a normal level of 40 V to a high level of 100 V and found a positive correlation between surface hardness and voltage. The surface hardness values of AAO formed at 100 V reach about 423 HV without pore sealing in 30 min. By employing a hybrid pulse anodization (HPA) method, we are able to prevent the high-voltage burning effect and complete the anodization process at room temperature. The mechanism behind this can be explained by the porosity and photoluminescence (PL) intensity of AAO. For the same thickness of AAO from 40~100 V, increasing the anodizing voltage decreases both the porosity and PL intensity, indicating a reduction in pores, as well as anion and oxygen vacancy defects, due to rapid AAO growth. This reduction in defects in the AAO film leads to an increase in hardness, allowing us to significantly enhance AAO hardness without a pore-sealing process. This offers an effective hardness enhancement in AAO under economically feasible conditions for the application of hard coatings and protective films.

A structured approach to modifying an implementation package while scaling up a complex evidence-based practice.

To describe a structured, iterative, data-driven approach for modifying implementation strategies for a complex evidence-based practice during a nationwide scale-up initiative. We scaled-up implementation of Critical Time Intervention (CTI)-an evidence-based case management model-across 32 diverse community-based Veterans Affairs (VA) "Grant and Per Diem" case management (GPD-CM) agencies that serve homeless-experienced Veterans transitioning to independent living. Primary data were collected using qualitative methods. We embarked on a scale-up initiative while conducting a pragmatic randomized evaluation using a roll-out design, comparing two versions of a CTI implementation package tailored to VA's GPD-CM program. We iteratively assessed contextual factors and implementation outcomes (e.g., acceptability); findings informed package modifications that were characterized using the Framework for Reporting Adaptations and Modifications to Evidence-based Implementation Strategies. We conducted semi-structured interviews with Veterans, GPD-CM staff, and liaising VA clinicians; periodic reflections with liaising VA clinicians and implementation team members; and drew upon detailed meeting notes. We used rapid qualitative methods and content analysis to integrate data and characterize modifications. After each scale-up wave-in response to variations in agency-level characteristics- we made iterative modifications to the implementation package to increase CTI adoption and fidelity across the diverse contexts of our scale-up sites. Modifications included adding, deleting, integrating, and altering the package; core package components were preserved. Implementation packages for complex evidence-based practices undergoing scale-up in diverse contexts may benefit from iterative modifications to optimize practice adoption with fidelity. We offer a structured, pragmatic approach for iteratively identifying data-driven, midstream implementation package adjustments, for use in both VA and non-VA scale-up initiatives. Our project demonstrates the importance of assessing for and making modifications in a scale-up initiative, as well as the trade-offs of projects having simultaneous formative and summative evaluation aims.

Volatile organic contaminants in HDPE milk bottles along the mechanical recycling value chain, revealing origins and contamination pathways

To progress towards closed-loop recycling of plastic packages it is vital to understand the origin of contaminants and to develop effective mitigation strategies. High density polyethylene (HDPE) milk bottles were sampled at nine different locations along the recycling value chain and analysed with two gas chromatography – mass spectroscopy methods to study the presence of volatile organic compounds. The total approximated concentration of volatiles reduced over time from the production of the bottles up to the cross-docking facility for the separately collected lightweight packaging waste (from about 250 to 100 ppm), as alkanes and alkenes evaporate from the bottle. A clear maximum was observed in the number of identified of volatiles and in the total approximated concentration in milk bottles at the sorted HDPE product. Here contaminants peaked that originate from the milk, from other packaging components (labels, caps, inlays), from other packages and from the surrounding atmosphere. When only the milk bottles were manually separated out from this sorted product and these were mechanically recycled, flakes were obtained that contain the least amount of volatile compounds, much less than the freshly produced bottles (about 25–50 ppm). The type of volatiles present was, however, markedly different. In the freshly produced bottles alkanes, alkenes and intentionally added anti-oxidant were found, whereas in the recycled flakes mostly contaminants were found that originated from: the milk, the other packaging components, other packages and the surrounding atmosphere. Seven different contamination pathways were discerned. The gathered knowledge facilitates the future development of food-grade recycled HDPE.