Electrocatalytic Activity For Oxygen Reduction Reaction Research Articles

ZIF-8 derived iron-, sulphur-, and nitrogen-doped catalysts for anion-exchange membrane fuel cell application

This study presents the preparation of tridoped Fe, N, S carbon-based catalysts using ZIF-8 as the main carbon source and iron(II)acetate, 1,10-phenanthroline, ammonia gas and thiourea as precursors for Fe, N and S elements. Thiourea was mixed via planetary ball-milling with a Fe–N–C catalyst prepared by inert gas pyrolysis, and different pyrolysis conditions were applied thereafter. The main goal of the work is to synthesise active non-precious metal electrocatalysts for oxygen reduction reaction (ORR). High electrocatalytic ORR activity in alkaline media was observed for the two materials obtained after thiourea addition and subsequent pyrolysis. Physico-chemical characterisation revealed successful S- and N-doping for all three catalysts with enhanced porosity for the two materials that were subjected to additional pyrolysis after the thiourea addition. The sulphur doping was highest for the FeNSC3 material that was subjected to a second pyrolysis in N2 and a third pyrolysis in NH3, compared to the FeNSC2 material that was subjected to a single pyrolysis in NH3 flow after thiourea addition. The ORR activity of FeNSC2 with half-wave potential of 0.88 V was slightly higher than that of FeNSC3, and the former was selected for evaluation as a cathode catalyst in an anion-exchange membrane fuel cell.

In-Situ Nanoarchitectonics of Fe/Co LDH over Cobalt-Enriched N-Doped Carbon Cookies as Facile Oxygen Redox Electrocatalysts for High-Rate Rechargeable Zinc-Air Batteries.

The reality of long-term rechargeable and high-performance zinc-air batteries relies majorly on cost-effective and eminent bifunctional electrocatalysts, which can perform both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER). Herein, we demonstrate a new approach for the synthesis of in-situ-grown layered double hydroxide of iron and cobalt over a cobalt nanoparticle-enriched nitrogen-doped carbon frame (CoL 2:1) by a simple coprecipitation reaction with facile scale-up and explore its electrocatalytic ORR and OER activity for an electrically rechargeable zinc-air battery. Consequently, the developed composite displays excellent ORR and OER activity with an ORR half-wave potential of 0.84 V, a limiting current density of 5.85 mA/cm2, and an OER overpotential of 320 mV with exceptional stability. The outstanding bifunctionality index of the catalyst (ΔE = 0.72 V) inspired us to utilize it as a cathode catalyst in an in-house developed prototype zinc-air battery. The battery could easily supply a specific capacity of 804 mAh/g with a maximum peak power density of 161 mW/cm2. The battery exhibits an attractive charge-discharge profile with a lesser voltage gap of 0.76 V at 10 mA/cm2 with durability for a period of 200 h and a voltage efficiency of 97%, which surpassed the corresponding Pt/C + RuO2-based zinc-air battery. Further, a maximum load of 50 mA/cm2 could easily be sustained during cycling, revealing its outstanding stability. A series-connected two CoL 2:1-based zinc-air batteries effortlessly enlighten a pinwheel fan and LED panel simultaneously, revealing its practicality. The high electrical conductivity and greater specific surface area of Co/N-C and its robust attachment with Fe/Co LDH preserves both active sites, thereby resulting in exceptional performance. Our method is capable of being flexible enough to create various bifunctional Co/N-C-based composite electrodes, opening up a feasible pathway to rechargeable zinc-air batteries with maximum energy density.

Highly dispersed Zn-N, S co-doped carbon for highly efficient electrocatalytic oxygen reduction

Supportive atomic Zn electrocatalysts exhibit excellent stability for oxygen reduction reaction (ORR) due to their fully occupied d orbitals of Zn, but their catalytic activity is not satisfactory. Whereas heteroatom doping can anchor the Zn atoms to achieve higher Zn loading; and additionally serve as auxiliary sites to enhance the catalytic activity of Zn sites. Herein, we present a method for the synthesis of N, S co-doped carbon with highly dispersed Zn (named Zn-NSC). The ORR activity of the Zn-NSC catalysts is optimized by adjusting the pyrolysis temperature and the atomic structure of the dopant molecules. The optimized Zn-NSC demonstrates significantly enhanced ORR electrocatalytic activity, this is attributable to its highly co-doping of N and S heteroatoms that are adjacent to Zn atoms. Specifically, the Zn-NSC3 catalyst exhibits remarkable ORR characteristics with excellent onset voltage (0.97 V vs RHE) and half-wave potential (0.87 V vs RHE), surpassing those of Pt/C (0.97 V and 0.85 V, respectively). Additionally, the Zn-NSC3 can be utilized as efficient cathode for Al-air batteries, achieving a high power density of 119.4 mW cm−2 and satisfactory discharge stability. This work proposes an approach for synthesizing low-cost and efficient ORR electrocatalysts for Al-air battery applications.

Synergistic Modulating Interlayer Space and Electron-Transfer of Covalent Organic Frameworks for Oxygen Reduction Reaction.

Covalent organic frameworks (COFs) are an ideal template to construct high-efficiency catalysts for oxygen reduction reaction (ORR) due to their predictable properties. However, the closely parallel-stacking manner and lacking intramolecular electron transfer ability of COFs limit atomic utilization efficiency and intrinsic activity. Herein, COFs are constructed with large interlayer distances and enhanced electronic transfer ability by side-chain functionalization. Long chains with electron-donating features not only enlarge interlayer distance, but also narrow the bandgap. The resulting DPPS-COF displays higher electrochemical surface areas to provide more exposed active sites, despite <1/10 surface areas. DPPS-COF exhibits excellent electrocatalytic ORR activity with half-wave potential of 0.85V, which is 30 and 60mV positive than those of Pt/C and DPP-COF, and is the record among the reported COFs. DPPS-COF is employed as cathode electrocatalyst for zinc-air battery with a maximum power density of 185.2mW cm-2 , which is superior to Pt/C. Theoretical calculation further reveals that longer electronic-donating chains not only facilitate the formation of intermediate OOH* from O2 , but also promote intermediates desorption , and thus leading to higher activity.

Quasi‐in situ Observation of MnO2 Nanorods by Electrochemical Transmission Electron Microscopy for Oxygen Reduction Reaction Process

Understanding the electrode materials’ surface is of fundamental importance for catalytic studies as most electrochemical reactions take place there. Although several operando techniques have been used to monitor the electrocatalytic process, real‐time imaging techniques for observing the surface change on electrode materials are still a challenge and limited to a few stable catalytic systems. Herein, the quasi‐in situ electrochemical transmission electron microscopy (TEM) was carried out to track the morphological and local structure evolution during the oxygen reduction reaction (ORR) on manganese dioxide (MnO2) for the first time. The α‐MnO2 nanorods exhibit comparable ORR electrocatalytic activity (half‐wave potential, E1/2: 0.83 vs. 0.85 V vs. RHE; diffusion‐limiting current density, Jd: −5.46 vs. −5.52 mA cm−2) and better methanol tolerance than Pt/C. An electrochemical TEM chip assembled with a three‐electrode system was used to perform the electrochemical experiments similar to typical testing procedures. The ex situ and quasi‐in situ TEM images consistently showed that MnO2 nanorods had undergone surface roughening, and lattice expansion with 0.97% and 1.97% in the a and c‐axis, respectively as ORR proceeded. The quasi‐in situ electrochemical TEM fills the gap between ex situ characterization and operando spectroscopies and deepens the mechanistic understanding of electrocatalytic processes.

Enhanced lanthanum-stabilized low crystallinity metal oxide electrocatalysts with superior activity for oxygen reactions

Oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are key electrochemical reactions for the development of rechargeable Zn-air batteries. However, due to the high cost of commercial noble metal-based catalysts and their limited bifunctionality, it is necessary the design of new electrocatalysts. In this study, stable electrocatalysts have been synthesized through a hydrothermal method and further low-temperature thermal treatment. The materials consist of La stabilized low crystallinity Mn and Co metal (hydro-)oxides. The electrocatalytic performance of these materials has been compared with counterparts calcined at higher temperatures. The findings demonstrate that materials synthesized at lower temperatures and with low crystallinity exhibit superior electrocatalytic activity for both ORR and OER. Moreover, the research highlights the favorable influence of the lanthanum cation, which enhances changes of surface morphology and oxidation states of other cations (Mn and Co). Additionally, the positive contribution of the carbon component to electrochemical activity and electrical conductivity has been elucidated. The best electrocatalyst was studied in a rechargeable Zn-air battery with a durability of up to 120 h. They exhibited better stability and performance than the commercial Pt/C + RuO2 catalyst currently used.

Electrochemical Performance of Metal-Free Carbon-Based Catalysts from Different Hydrothermal Carbonization Treatments for Oxygen Reduction Reaction.

This research investigates the difference between products obtained through two hydrothermal carbonization treatments. Our aim is to synthesize metal-free, carbon-based catalysts for the oxygen reduction reaction (ORR) to serve as efficient and cost-effective alternatives to platinum-based catalysts. Catalysts synthesized using the traditional hydrothermal approach exhibit a higher electrocatalytic activity for ORR in alkaline media, despite their more energy-intensive production process. The superior performance is attributed to differences in the particle morphology and the chemical composition of the particle surfaces. The presence of functional groups on the surfaces of catalysts obtained via a traditional approach significantly enhances ORR activity by facilitating deprotonation reactions in an alkaline environment. Our research aims to provide a reference for future investigations, shifting the focus to the fine-tuning of surface chemical compositions and morphologies of metal-free catalysts to enhance ORR activity.

Solution-Plasma Synthesis and Characterization of Transition Metals and N-Containing Carbon-Carbon Nanotube Composites.

Lithium-air batteries (LABs) have a theoretically high energy density. However, LABs have some issues, such as low energy efficiency, short life cycle, and high overpotential in charge-discharge cycles. To solve these issues electrocatalytic materials were developed for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), which significantly affect battery performance. In this study, we aimed to synthesize electrocatalytic N-doped carbon-based composite materials with solution plasma (SP) using Co or Ni as electrodes from organic solvents containing cup-stacked carbon nanotubes (CSCNTs), iron (II) phthalocyanine (FePc), and N-nethyl-2-pyrrolidinone (NMP). The synthesized N-doped carbon-based composite materials were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). TEM observation and XPS measurements revealed that the synthesized carbon materials contained elemental N, Fe, and electrode-derived Co or Ni, leading to the successful synthesis of N-doped carbon-based composite materials. The electrocatalytic activity for ORR of the synthesized carbon-based composite materials was also evaluated using electrochemical measurements. The electrochemical measurements demonstrated that the electrocatalytic performance for ORR of N-doped carbon-based composite material including Fe and Co showed superiority to that of N-doped carbon-based composite material including Fe and Ni. The difference in the electrocatalytic performance for ORR is discussed regarding the difference in the specific surface area and the presence ratio of chemical bonding species.

Laser-optimized Pt-Y alloy nanoparticles embedded in Pt-Y oxide matrix for high stability and ORR electrocatalytic activity

The development of active yet stable catalysts for oxygen reduction reaction (ORR) is still a major issue for the extensive permeation of fuel cells into everyday technology. While nanostructured Pt catalysts are to date the best available systems in terms of activity, the same is not true for stability, particularly under operating conditions. In this work, PtXY alloy nanoparticles are proposed as active and durable electrocatalysts for ORR. PtXY nanoalloys are synthesized and further optimized by laser ablation in liquid followed by laser fragmentation in liquid. The novel integrated laser-assisted methodology succeeded in producing PtxY nanoparticles with the ideal size (<10 nm) of commercial Pt catalysts, yet resulting remarkably more active with E1/2 = 0.943 V vs. RHE, specific activity = 1095 μA cm−2 and mass activity > 1000 Ag−1. At the same time, the nanoalloys are embedded in a fine Pt oxide matrix, which allows a greater stability of the catalyst than the commercial Pt reference, as directly verified on a gas diffusion electrode.

Tuning the performance of Fe-porphyrin aerogel-based PGM-free oxygen reduction reaction catalysts in proton exchange membrane fuel cells.

Fe-N-C catalysts are currently the leading candidates to replace Pt-based catalysts for the oxygen reduction reaction in proton exchange membrane fuel cells. To maximize their activity, it is necessary to optimize their structure to allow high active site density on one hand, and hierarchical porous structure that will allow good mass transport of reactants and products to and from the active sites on the other hand. Hence, the hierarchical structure of the catalyst plays an important role in the balance between the electrochemical active site density and the mass transport resistance. Aerogels were synthesized in this work to study the interplay between these two parameters. Aerogels are covalent organic frameworks with ultra-low density, high porosity, and large surface area. The relative ease of tuning the composition and pore structure of aerogels make them prominent candidates for catalysis. Herein, we report on a tunable Fe-N-C catalyst based on an Fe porphyrin aerogel, which shows high electrocatalytic oxygen reduction reaction activity with tunable hierarchical pore structure and studied the influence of the porous structure on the overall performance in proton exchange membrane fuel cells.

Enhancing the Hydrogen-Air Fuel Cell Performance of Octahedral Ptni Nanoalloys with Rational Design of Dopants, Layering and Support in the PEM Fuel Cells

This study focuses on the scale-up synthesis of carbon-supported octahedral PtNiX nanoparticles to improve their oxygen reduction reaction electrocatalytic activity, stability, and high current density for fuel cell applications. Octahedral PtNiX nanoparticles doped with different elements such as Rh or Ir and with high Pt loading on carbon supports were synthesized, characterized by physio-chemical methods and tested in single MEA-based fuel cells after rotating disk electrode (RDE) pre-screening measurements. Different carbon supports were compared, including N-doped carbon. We investigated the sensitivity of the I/C ratio for the ink on the performance of the nanoparticles in RDE, and show that it is an important parameter to consider during synthesis. Our study shows that the sensitivity of the I/C ratio is more pronounced for PtNi alloy octahedra than for pure Pt catalyst. Moreover, we also use in-situ measurement techniques, such as X-ray Absorption Spectroscopy (XAS) in a liquid cell, to study the impact of the dopants during the operation. In the MEA, we achieve a state-of-the-art current density of around 1500 mA/cm2 at 0.6V for octahedral PtNiX nanoparticles in fuel cell applications. This high current density is attributed to the superior electrocatalytic activity and stability of the doped nanoparticles, as well as their high loading of Pt. Overall, our results demonstrate the potential of octahedral PtNiX nanoparticles as highly efficient electrocatalysts for fuel cell applications. The study highlights the importance of considering the I/C ratio during catalyst ink preparation, and the use of in-situ measurement techniques to improve the fundamental understanding of catalyst structure-activity and -stability for the design of future electrocatalysts.

Non-PGM Cathode Electrocatalysts for PEM Fuel Cells

Polymer electrolyte membrane fuel cells, PEMFCs, are considered the most ideal next generation energy conversion device, able to provide power to a broad range of applications; automotive, combined heat and power, portable electronic devices. Pt-based electrocatalysts are regarded as ideal for promoting the desired redox reactions of a fuel cell, especially the sluggish oxygen reduction at the cathode, ORR. High expense and scarcity of Pt are the greatest impediments to successful commercialization of this technology. The replacement of unsustainable noble-metal catalysts with platinum group metal (PGM)-free catalysts for oxygen reduction reaction (ORR) is essential for material wise and market value viable PEMFCs.Among the different attempts towards non-PGM catalysts, incorporating atomically dispersed transition metal atoms (Fe, Mn, etc.) and heteroatoms (N, S, etc.) into carbon frameworks is the most promising [1,2]. Large specific surface area, high intrinsic ORR electrocatalytic activity, efficient porosity and sufficient stability in acid media and/or in the actual working environment are the least requirements to consider when designing the catalysts. So far, despite the tremendous efforts, many drawbacks still persist that include poor understanding of the nature of active centres and their control over the synthesis, as well as fast decay of the structure under operation.In this work, we will present a rationally designed strategy to prepare hybrid composite catalysts by developing Fe–N–C materials onto different 2D and 3D templates [3,4] with differentiated surface chemistry (silicon and heteroatom-doped carbon structures). Despite structural and physicochemical characterization, the study includes extensive electrochemical characterization in terms of activity and durability in relative to the application conditions. An example is depicted in Figure 1 for a single atom Fe-N-C catalyst synthesized using porous silica nanotubes as the sacrificial template resulting in a hierarchically porous structure with a surface area of 370 m2/g. Electrochemical study revealed a half-wave potential of 0.72 V and an onset potential of 0.88 V with high stability in acidic environment.Very importantly, the different findings are correlated to one another, thereby establishing a composition to function relationship to provide a pathway for the integrated engineering of novel structures with improved performance. Acknowledgments Funding from the Operational Program “Competitiveness, Entrepreneurship & Innovation” (EPAnEK), NSRF 2014-2020 through the project Solar2HyP Τ2ΕΔΚ-01877 References [1] L. Osmieri, et al., Current Opinion in Electrochemistry 25 (2020) 100627.[2] T. Asset, et al., Joule 4 (2019) 33-44.[3] Jin-Cheng Li et al., Asia Materials 10 (2018) e461[4] Nan Zhang et al., Energy Environ. Sci. 13 (2020) 111-118 Figure 1

N-Doped Norbornane sp2 Carbon Framework: An Efficient Electrocatalyst for Oxygen Reduction and Hydrogen Evolution Reaction

At present, development of Pt free bifunctional electrocatalyst for oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER) is necessary for the advancement of sustainable and cost-effective solutions for energy conversion and storage technology. In this direction, herein we report N doped sp2 hybridized carbon framework (N-CF) as a metal-free electrocatalyst for ORR and HER. This work inspects the effect of N doping that converts a hybrid structure of CF {Norbornane or bicyclo [2, 2, 1] heptane structure} into planar N-CF. A series of N-doped CF with different doping concentrations has been prepared using a facile and cost-effective technique. This robust electrocatalysts exhibits a promotional effect in the activity, porosity, thermal and electrochemical stability for the ORR and HER reactions. A rich delocalized electronic density of the sp2 bounded N species helps in modulating antibonding state of molecular oxygen and facilitates the breakage of O=O bond in ORR. It also promotes proton adsorption via bonding between proton and valence electron rich catalyst surface to aid HER. The research sought to investigate the employability of N-CF for fabricating sustainable energy devices with electrocatalyst possessing multiple electrocatalytic activities for ORR and HER. Figure 1

Metal(Pt, Pd)-Perovskite Oxide(Ba0.5Sr0.5Co0.8Fe0.2O3-δ) Hybrid Material As a Bifunctional Electrocatalyst for Lithium-Air Battery

The rapid depletion of fossil fuel resources and growing concerns over climate change have made the development of next-generation batteries a top priority. Among these, Li-O2 batteries have attracted significant interest due to their potential for much higher gravimetric energy storage density compared to other chemical batteries. However, efficient and cost-effective catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are critical for the efficient functioning of these batteries.In recent years, complex perovskite oxides, such as Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF), have been identified as promising candidates for bifunctional catalysts due to their defective structures and excellent oxygen mobility. However, while BSCF exhibits high OER activity, its ORR performance is poor. To address this issue, researchers have turned to metal-oxide composite catalysts, where nanosized metals are deposited on the surface of perovskite oxides, to increase activity and stability towards ORR due to the synergistic effect between metal and oxide support.In this study, we report the development of bifunctional electrocatalysts with highly electrocatalytic activity for ORR and OER. We used a simple wet-chemical processing technique to deposit metal catalysts with superior ORR activity on perovskite oxide-based catalysts with high OER activity. The direct deposition method is an effective way to create a good distribution of metal catalysts, intimate contact between metal catalysts and BSCF perovskite oxide, which may contribute to the creation of a synergistic effect between them. Our results showed that the metal catalysts deposited on perovskite oxides of Pd@BSCF and Pt@BSCF exhibited better ORR activity than others and higher OER activity than the perovskite oxides alone, resulting in much-enhanced bifunctionality through a synergistic effect between the metal catalysts and perovskite oxides.We further investigated the enhanced bifunctional electrocatalytic activity of the metal catalysts deposited perovskite oxides for Li-O2 batteries. The assembled Li-O2 batteries with Pd@BSCF cathode demonstrated lower discharge/charge overpotential (0.8 V at the cutoff capacity of 500 mAh gcat -1) and improved cycling stability (over 70 cycles), indicating the effectiveness of our approach in enhancing the bifunctional activities of ORR and OER for application in electrochemical energy storage and conversion systems. The encouraging results obtained from this study might have been attributed to two mechanisms, namely, the synergistic effect of electronic transfer and RDS/spillover. Our study suggests that the deposition of metal catalysts on the surface of perovskite oxides (Pd@BSCF and Pt@BSCF) is an effective approach to enhance bifunctional activities of ORR and OER, making it a promising strategy for the development of next-generation batteries. Figure 1

Pyridinic and Pyrrolic-N induced carbon nanotubes support bimetallic oxide nanoparticles as high-performance electrocatalysts for oxygen reduction reaction

In-expensive MnO2-based nanostructure has been considered the ideal electrode material for oxygen reduction reaction (ORR) in fuel cell technology. Regardless of their highly active ORR performance, the fuel cross-over capacity and stability of MnO2-based catalysts are still far from satisfying. Herein, we report the highly active SnO2 nanoparticles (NPs) integrated on N-induced carbon nanotube (SnO2@NC) are combined with MnO2 nanoparticles through the electrodeposition to form effective nanostructured in which the MnO2 NPs and SnO2@NC in situ grown on a glassy carbon electrode (MnO2/SnO2@NC) with well-controlled reaction parameters, that exhibits superior ORR activity for the first time. We assessed the marginal role of pyridinic-N and pyrrolic-N in the electrocatalytic ORR activity, synthesis of MnO2/SnO2 bimetallic oxide electrocatalysts, and distribution behavior of NPs. Bimetallic MnO2/SnO2@NC electrode has unique synergistic interactions between MnO2/SnO2 NPs and NC support, which increases electro-active sites, and fast charge transfers towards ORR as compared to other as-prepared electrodes on account of the rational design of the electrode-electrolyte interface plays a significant role in expediting the ORR kinetics. Additionally, the surface nanostructure features, crystalline structure, as well as electronic chemical states of the MnO2/SnO2 NPs embedded in N-induced CNTs, were examined by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. Furthermore, bimetallic MnO2/SnO2@NC nanostructure leads an outstanding ORR performance in the 0.1 M KOH electrolyte, delivering a halfwave potential (-0.878 V) and remarkable limiting current density (-4.14 mA cm−2) and much better tolerance to the ethanol cross-over effect with high stability. Thus, the present strategy opens a new path to the design of a pyridinic-N and pyrrolic-N-oriented bimetallic oxide nanostructure as a high-active electrocatalyst for ORR application.

Graphdiyne and Nitrogen-Doped Graphdiyne Nanotubes as Highly Efficient Electrocatalysts for Oxygen Reduction Reaction

Electrocatalysts with high efficiency and low cost are always urgently needed for oxygen reduction reaction (ORR). As a new carbon allotrope, graphdiyne (GDY) has received much attention due to its unique chemical structure containing sp- and sp2-hybridized carbons, and intrinsic electrochemical activity ascribed to its inherent conductivity. Herein, we prepared two graphdiyne materials named GDY nanotube and nitrogen-doped GDY (NGDY) nanotube via cross-coupling reactions on the surface of Cu nanowires. As metal-free catalysts, their electrocatalytic activities for ORR were demonstrated. The results showed that the NGDY nanotube presents more excellent electrochemical performance than that of the GDY nanotube, including more positive potential and faster kinetics and charge transfer process. The improvement can be ascribed to the greater number of structural electrocatalytic active sites from nitrogen atoms as well as the hollow nanotube morphology, which is beneficial to the adsorption of oxygen and acceleration of the catalytic reaction. This work helps develop high-quality graphdiyne-based electrocatalysts with well-defined chemical structures and morphologies for various electrochemical reactions.

Adapting Synthetic Models of Heme/Cu Sites to Energy-Efficient Electrocatalytic Oxygen Reduction Reaction.

In nature, cytochrome c oxidases catalyze the 4e- oxygen reduction reaction (ORR) at the heme/Cu site, in which CuI is used to assist O2 activation. Because of the thermodynamic barrier to generate CuI , synthetic Fe-porphyrin/Cu complexes usually show moderate electrocatalytic ORR activity. We herein report on a Co-corrole/Co complex 1-Co for energy-efficient electrocatalytic ORR. By hanging a CoII ion over Co corrole, 1-Co realizes electrocatalytic 4e- ORR with a half-wave potential of 0.89 V versus RHE, which is outstanding among corrole-based electrocatalysts. Notably, 1-Co outperforms Co corrole hanged with CuII or ZnII . We revealed that the hanging CoII ion can provide an electron to improve O2 binding thermodynamically and dynamically, a function represented by the biological CuI ion of the heme/Cu site. This work is significant to present a remarkable ORR electrocatalyst and to show the vital role of a second-sphere redox-active metal ion in promoting O2 binding and activation.

Adapting Synthetic Models of Heme/Cu Sites to Energy‐Efficient Electrocatalytic Oxygen Reduction Reaction

AbstractIn nature, cytochrome c oxidases catalyze the 4e− oxygen reduction reaction (ORR) at the heme/Cu site, in which CuI is used to assist O2 activation. Because of the thermodynamic barrier to generate CuI, synthetic Fe‐porphyrin/Cu complexes usually show moderate electrocatalytic ORR activity. We herein report on a Co‐corrole/Co complex 1‐Co for energy‐efficient electrocatalytic ORR. By hanging a CoII ion over Co corrole, 1‐Co realizes electrocatalytic 4e− ORR with a half‐wave potential of 0.89 V versus RHE, which is outstanding among corrole‐based electrocatalysts. Notably, 1‐Co outperforms Co corrole hanged with CuII or ZnII. We revealed that the hanging CoII ion can provide an electron to improve O2 binding thermodynamically and dynamically, a function represented by the biological CuI ion of the heme/Cu site. This work is significant to present a remarkable ORR electrocatalyst and to show the vital role of a second‐sphere redox‐active metal ion in promoting O2 binding and activation.

Concave Structural Carbon Co-Doped with Iron Atom Pairs and Nitrogen as Ultra-High Performance Catalyst Toward Oxygen Reduction.

It is crucial to rationally design and synthesize atomic-scale transition metal-doped carbon catalysts with high electrocatalytic activity to achieve a high-efficient oxygen reduction reaction (ORR). Herein, an electrocatalyst comprised of Fe-Fe dual atom pairs and N-doped concave carbon are reported (N-CC@Fe DA) that achieves ultrahigh electrocatalytic ORR activity. The catalyst is prepared by a gaseous doping approach, with zeolitic imidazolate framework-8 (ZIF-8) as the carbon framework precursor and cyclopentadienyliron dicarbonyl dimer as the Fe-Fe atom pair precursor. The catalyst exhibits high cathodic ORR catalytic performance in an alkaline Zn/air battery and proton exchange membrane fuel cell (PEMFC), yielding peak power densities of 241 mW cm-2 and 724mWcm-2, respectively, compared to 127 mW cm-2 and 1.20Wcm-2 with conventional Pt/C catalysts as cathodes. The presence of Fe atom pairs coordinate with N atoms is revealed by X-ray photoelectron spectroscopy(XPS) and X-ray absorption spectroscopy (XAS) analysis, and Density Functional Theory (DFT) calculation results show that the Fe-Fe pair structure is beneficial for adsorbing oxygen molecules, activating the O─O bond, and desorbing OH* intermediates formed during oxygen reduction, resulting in a more efficient oxygen reaction. The findings may provide a new pathway for preparing ultra-high-performance doped carbon catalysts with Fe-Fe atom pair structures.

Electrochemically Reduced Graphene Oxide Supported Palladium-Cobalt Alloy Nanoparticles as Highly Efficient Electrocatalyst for Oxygen Reduction Reaction

Pd-Co alloy nanoparticles were synthesized on electrochemically reduced graphene oxide (ErGO) for electrocatalytic oxygen reduction reaction (ORR) in alkaline media. The morphological structure, chemical composition, and crystallinity of the afforded ErGO/Pd-Co catalyst were examined by various techniques, including transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction analysis. The Pd-Co alloy nanoparticles were evenly distributed on the ErGO sheet and had a narrow size distribution, with an average particle size of 4.25 nm. The ORR activity of the as-prepared ErGO/Pd-Co alloy catalyst was evaluated by cyclic voltammetry, linear sweep voltammetry, rotating disk electrode, and rotating ring disk electrode techniques in an alkaline electrolyte. The ErGO/Pd-Co catalyst exhibits a very high electrocatalytic activity in ORR with the mass activity more than 2.0 times of the commercial 20% Pt/C due to the synergistic catalytic effect of both ErGO and Pd-Co nanoparticles. Electrocatalytic kinetics investigation shows that, the ORR on the ErGO/Pd-Co catalyst proceeds through four electrons transferred mechanism with negligible amount of peroxide species. Moreover, the ErGO/Pd-Co shows an excellent methanol tolerance than the commercial 20% Pt/C.