Oxidation State Research Articles

Biomarker responses of Mediterranean mussels (Mytilus galloprovincialis, Lamarck 1819) regarding marine mucilage in the Sea of Marmara

It has been proposed that marine mucilage intensifies the biological effects of chemical pollutants and can increase their bioaccumulation in seafood. Indeed, in 2021, mucilage caused a major environmental disaster in the Sea of Marmara. Limited resources on the possible effects of marine mucilage on sustainable food security have increased the importance of this study. The aim of this study is to investigate the biochemical effects of mucilage in wild and cultured mussels, a bioindicator species collected from four different regions [Istanbul Strait (S1) and Canakkale Strait (S2), Bandirma (S3), Gelibolu (S4)] during the 2021 fishing season in the Sea of Marmara. The levels of reduced glutathione and lipid peroxidation, activities of antioxidant enzymes like glutathione reductase, glutathione-S-transferase, catalase, superoxide dismutase, activities of biomarker enzymes like alanine aminotransferase, aspartate aminotransferase, and lactate dehydrogenase activities were determined. Our findings demonstrated that mucilage had an impact on cellular oxidative state and compromised the lipid cell membranes in the mantle tissues of Mediterranean mussels (Mytilus galloprovincialis, Lamarck 1819). It was found that there is a high positive relationship between seawater temperatures and bioparameters in S2 and S3 regions, except for GSH level. This study puts forward that in the presence of marine mucilage the biological responses and the state of health of mussels are negatively affected. Parameters which exhibit this kind of response may be used as biomarkers of exposure to marine mucilage in wild and culture mussel populations. Environmental disasters such as marine mucilage naturally affect food security by putting the sustainability of these species at risk.

Subnanometer‐sized CuOx Clusters on TiO2 as Active Photocatalysts for Ammonia Production from Photocatalytic Nitration Reduction Reaction

The Haber‐Bosch process is commonly used to produce ammonia while consuming energy and yielding huge emissions of carbon dioxide. Finding an alternative way to produce ammonia sustainably is a promising research direction with less CO2 emission. Photochemical nitrate reduction reaction (NtRR) to ammonia (NH3) could solve the nitrate pollutant problem in water and approach to produce ammonia with a more environmentally friendly process and lower energy consumption. In this work, the subnanometer‐sized copper oxide clusters decorated on titanium oxide nanoparticles (CuOx‐TiO2) were synthesized through the hydrothermal method and calcination treatment. CuOx‐TiO2 demonstrated impressively conversion rate of NO3‐ to NH3 with a yield of 153.09 μg‐gcat‐1‐h‐1 in KNO3 solution. The characteristic structure analysis revealed CuOx clusters with ~less than 1 nm decorated on TiO2 nanoparticles. From in‐situ X‐ray absorption fine structure (XAFS) spectroscopic technique, the transformation of the oxidation state of Cu clusters and the changes of local structure in the CuOx‐TiO2 were observed. The photocatalytic reaction mechanism of nitrate reduction on the CuOx‐TiO2 was successfully revealed. These discoveries have broad implications for the functional advancement of catalysts based on subnanometer‐sized clusters. Our findings may pave the way for exploring advanced ammonia synthesis routes with reduced energy consumption and carbon emissions.

Magnetic hyperfine interactions of probe 57Fe atoms within the hexagonal manganite ScMnO3

Here we present the Mössbauer study of the combined magnetic and electrical hyperfine interactions of the probe 57Fe nuclei localized in the hexagonal manganite ScMnO3. The hyperfine interactions were measured in the temperature range where ScMnO3 demonstrates spin ordering: 15 K <T <TN (∼ 130 K). By analyzing the hyperfine parameters of 57Fe nuclei, we evaluated the oxidation state of the iron ions, their local crystal environment, and the orientation of the magnetic moments μFe in the structure of ScMn0.99657Fe0.004O3 at T <<TN. The temperature-dependent evolution of Zeeman structures in Mössbauer spectra was analyzed using the stochastic relaxation model, and indicates the presence of frustration of the superexchange interactions Fe3+−O−Mn3+. The temperature dependence of the hyperfine magnetic field Bhf(T) was described using critical indices, whose values reflect the reduced dimensionality of the magnetic system under study. It was shown that the observed sharp temperature-dependent change of the quadrupole shift of the Zeeman structure components may be attributed to the spin reorientation process, resulting in antiferromagnetism with a weak ferromagnetic component.

Enhanced Energy Storage Performance through Controlled Composition and Synthesis of 3D Mixed Metal-Oxide Microspheres

Binary transition metal oxide complexes (BTMOCs) in three-dimensional (3D) layered structures show great promise as electrodes for supercapacitors (SCs) due to their diverse oxidation states, which contribute to high specific capacitance. However, the synthesis of BTMOCs with 3D structures remains challenging yet crucial for their application. In this study, we present a novel approach utilizing a single-step hydrothermal technique to fabricate flower-shaped microspheres composed of a NiCo-based complex. Each microsphere consists of nanosheets with a mesoporous structure, enhancing the specific surface area to 23.66 m2 g−1 and facilitating efficient redox reactions. When employed as the working electrode for supercapacitors, the composite exhibits remarkable specific capacitance, achieving 888.8 F g−1 at 1 A g−1. Furthermore, it demonstrates notable electrochemical stability, retaining 52.08% capacitance after 10,000 cycles, and offers a high-power density of 225 W·kg−1, along with an energy density of 25 Wh·kg−1, showcasing its potential for energy storage applications. Additionally, an aqueous asymmetric supercapacitor (ASC) was assembled using NiCo microspheres-based complex and activated carbon (AC). Remarkably, the NiCo microspheres complex/AC configuration delivers a high specific capacitance of 250 F g−1 at 1 A g−1, with a high energy density of 88 Wh kg−1, for a power density of 800 W kg−1. The ASC also exhibits excellent long-term cyclability with 69% retention over 10,000 charge–discharge cycles. Furthermore, a series of two ASC devices demonstrated the capability to power commercial blue LEDs for a duration of at least 40 s. The simplicity of the synthesis process and the exceptional performance exhibited by the developed electrode materials hold considerable promise for applications in energy storage.

Pressing of Functionalized Polymer Composite Materials to Improve Mössbauer Measurement Signals

Coordination compounds, like iron(II) triazole complexes, exhibit spin crossover (SCO) behavior at around room temperature. Therefore, they are interesting for a variety of possible applications, and it is convenient to integrate them into polymers. Due to a reduction of the iron content and thus also 57Fe content in the sample through integration in polymers, Mössbauer measurements are only possible with greater difficulty or very long measurement times without expensive enrichment of the samples with 57Fe. So, other ways of improving the Mössbauer signal for these composite materials are necessary. Therefore, we pressed these composite materials to improve the Mössbauer spectra. In this study, we synthesized an iron(II) triazole spin crossover complex and an electrospun polymer complex composite nanofiber material including the same complex. For both products, Mössbauer measurements were performed at room temperature before and after using a press to show that the complex composite is not harmed through pressing. We investigate the influence of the pressing impact on the Mössbauer measurements in the context of measurement statistics and the measured signals. We show that pressing is not connected to any changes in the sample regarding the spin and oxidation state. We present that pressing improves the statistics of the Mössbauer measurements significantly. Furthermore, we use SEM measurements and PXRD to investigate whether or not the obtained fiber mats are destroyed in the pressing process.

Cobalt doped cubic and rhombohedral In2O3: The role of crystalline phase of indium oxide in sensor response to hydrogen

Cubic and rhombohedral indium oxide, as well as the In2O3 based composites with cobalt, were synthesized by hydrothermal method. It is shown that, regardless of the phase state of indium oxide, cobalt ions are embedded in the In2O3 structure during synthesis, resulting in the expansion of its lattice and an increase in the specific surface area of the composites. The introduction of cobalt into different phases of In2O3 changes the ratio of oxygen vacancies in composites. These findings underscore the dependence of sensor response of the composites to hydrogen on the phase state of In2O3.

Synergistic Enhancement of Supercapacitors with Cobalt‐Copper Bimetal–Organic Framework

Metal‐organic frameworks (MOFs), as high‐potential electrode materials for applications in supercapacitors, have received significant attention recently. Unfortunately, MOF materials still suffer from unsatisfactory specific capacitances due to poor conductivity and limited redox active sites. In this work, a novel cobalt‐copper‐based bimetal–organic framework (CoCu‐MOF) was synthesized by a bottom‐up synthesis strategy, the material properties systematically characterized, and finally investigated as a supercapacitor electrode material. The synthesized CoCu‐MOF presented a high specific surface area of 62.4 m2 g−1, and 83% of the copper ions attained the +1 oxidation state contributing to the formation of additional redox active sites and leading to the formation of dual‐redox sites. The CoCu‐MOF displayed an excellent specific capacitance of 618 F g−1 at a current density of 1 A g−1, which was more than twice that of Co‐MOF and four times that of Cu‐MOF. The CoCu‐MOF retained 75% of its original capacitance after 3000 charge‐discharge cycles at the current density of 1 A g−1. Overall, this work demonstrates how the bimetallic synergistic strategy can effectively enhance the electrochemical properties of MOFs by providing a higher specific surface area and by the introduction of dual redox sites.This article is protected by copyright. All rights reserved.

Synthesis of sulfide mineral crystals by incongruent methods using the example of Cu-Fe-S and Cu-Fe-Se systems

Research subject. Understanding the structure and thermodynamic properties of sulfide minerals is important for studying the paragenesis of sulfide formation on Earth and in space, as well as for analyzing technological issues in the processing of ores and polysulfide product concentrates. There is a lack of experimental and theoretical information on many representatives of the Cu-Fe-S and Cu-Fe-Se systems. Aim. To synthesize crystals in the Cu-Fe-S and Cu-Fe-Se systems at the lowest possible temperatures for the subsequent study of their physical properties, while solving the main problem of materials science related to interrelations between composition, structure, and properties. Materials and methods. Crystal synthesis was carried out by the solution-melt method in a stationary temperature gradient, in evacuated sealed quartz glass ampoules. Two types of ampoules were used in the experiment, standard and long. The ampoules were filled with a charge and a salt mixture of RbCl-LiCl of eutectic composition, evacuated and sealed, then placed in several quartz or ceramic glasses. The glasses were placed in tubular furnaces such that the ends of the ampoules with the charge were located closer to the center of the furnace, and the opposite ends were closer to the edge to create a temperature gradient. For standard ampoules, the hot end temperature was 520–469℃, and the cold end was 456–415℃. For long ones: 470℃ – hot end and 340℃ – cold. The synthesis duration ranged from three to four months. Results. Depending on the composition of the charge, crystals of chalcocine Cu2S, bornite Cu5FeS4, chalcopyrite CuFeS2, isocubanite CuFe2S3, and iron-containing dicopper sulfide with an iron content of up to 8 at % and various equilibrium associations with their participation and with the participation of pyrite FeS2 and pyrrhotites Fe1–xS were obtained. Copper dendrites were also found in some samples. In addition, crystals of a phase with the approximate composition of CuFeSe2 were obtained. It is shown that due to different combinations of oxidation states of all three elements dissolved in a salt electrolyte, it is possible to obtain phases with almost any stoichiometric ratio. Chalcopyrite and isocubanite are reliably detected using Raman spectroscopy. In this case, some samples are locally characterized by the “absence” of a spectrum, which probably indicates the metallic (semi-metallic) properties of the samples. Conclusion. Using the Cu-Fe-S and Cu-Fe-Se systems as an example, the possibility of obtaining sulfide crystals in a RbCl-LiCl salt melt up to a eutectic temperature of 313℃ is shown. Due to the low synthesis temperature, the synthesis should be carried out over several months, resulting in crystals a fraction of a millimeter in size.

Comparative study between oxide/soft ferrite, oxide/hard ferrite, and soft/hard ferrite nanocomposites: structural, electrical, and magnetic properties

Abstract Three binary nanocomposites (NCs): (0.5NiO/0.5Ni0.5Zn0.5Fe2O4), (0.5NiO/0.5BaFe12O19), and (0.5Ni0.5Zn0.5Fe2O4/0.5BaFe12O19) were prepared using the co-precipitation method followed by the wet ball-milling technique. X-ray diffraction analysis showed the production of NiO and Ni0.5Zn0.5Fe2O single phases, while the α-Fe4 2O3secondary phase appeared in the BaFe12O19 and the 0.5Ni0.5Zn0.5Fe2O4/0.5BaFe12O19 nanocomposite. The transmission electron microscopy investigation and the selected area electron diffraction demonstrated the presence of the nanocomposites' constituent phases. X-ray photoelectron spectroscopy identified the oxidation states found in the prepared samples (Ba2+, Ni2+, Ni3+, Zn2+, Fe3+, and O2-). The bandgap values ( ) of the nanocomposites are in the range between 2.79 and 3.66 eV, which indicates their semiconductor nature. The DC conductivity experiment confirmed the semiconducting nature of all samples, and the activation energies ( ) and ( ) at high and low-temperature regions, respectively, were calculated from the Arrhenius equation. According to the vibrating sample magnetometer, the NCs exhibited ferromagnetic (FM) as showed by the M-H loops. In the oxide/soft ferrite NC, dM/dH curve indicated strong exchange coupling interactions, while the hard and the soft magnetic phases in the oxide/hard ferrite and the soft/hard ferrite NCs were weakly exchanged coupled. Significant uses had been found for each of the three nanocomposites according to their constituent phases and properties.&amp;#xD;

C–heteroatom coupling with electron-rich aryls enabled by nickel catalysis and light

AbstractNickel photoredox catalysis has resulted in a rich development of transition-metal-catalysed transformations for carbon–heteroatom bond formation. By harnessing light energy, the transition metal can attain oxidation states that are difficult to achieve through thermal chemistry in a catalytic manifold. For example, nickel photoredox reactions have been reported for both the synthesis of anilines and aryl ethers from aryl(pseudo)halides. However, oxidative addition to simple nickel systems is often sluggish in the absence of special, electron-rich ligands, leading to catalyst decomposition. Electron-rich aryl electrophiles therefore currently fall outside the scope of many transformations in the field. Here we provide a conceptual solution to this problem and demonstrate nickel-catalysed C–heteroatom bond-forming reactions of arylthianthrenium salts, including amination, oxygenation, sulfuration and halogenation. Because the redox properties of arylthianthrenium salts are primarily dictated by the thianthrenium, oxidative addition of highly electron-rich aryl donors can be unlocked using simple NiCl2 under light irradiation to form the desired C‒heteroatom bonds.

Regulating Cu Oxidation State for Electrocatalytic CO2 Conversion into CO with Near-Unity Selectivity via Oxygen Spillover.

Cu-based catalysts are the most intensively studied in the field of electrocatalytic CO2 reduction reaction (CO2RR), demonstrating the capacity to yield diverse C1 and C2+ products albeit with unsatisfactory selectivity. Manipulation of the oxidation state of Cu sites during CO2RR process proves advantageous in modulating the selectivity of productions, but poses a formidable challenge. Here, an oxygen spillover strategy is proposed to enhance the oxidation state of Cu during CO2RR by incorporating the oxygen donor Sb2O4. The Cu-Sb bimetallic oxide catalyst attains a remarkable CO2-to-CO selectivity approaching unity, in stark contrast to the diverse product distribution observed with bare CuO. The exceptional Faradaic efficiency of CO can be maintained across a wide range of potential windows of ≈700mV in 1m KOH, and remains independent of the Cu/Sb ratio (ranging from 0.1:1 to 10:1). Correlative calculations and experimental results reveal that oxygen spillover from Sb2O4 to Cu sites maintains the relatively high valence state of Cu during CO2RR, which diminishes the binding strength of *CO, thereby achieving heightened selectivity in CO production. These findings propose the role of oxygen spillover in CO2RR over Cu-based catalysts, and shed light on the rational design of highly selective CO2 reduction catalysts.

Monitoring Ti3C2Tx MXene Degradation Pathways Using Raman Spectroscopy.

Extending applications of Ti3C2Tx MXene in nanocomposites and across fields of electronics, energy storage, energy conversion, and sensor technologies necessitates simple and efficient analytical methods. Raman spectroscopy is a critical tool for assessing MXene composites; however, high laser powers and temperatures can lead to the materials' deterioration during the analysis. Therefore, an in-depth understanding of MXene photothermal degradation and changes in its oxidation state is required, but no systematic studies have been reported. The primary aim of this study was to investigate the degradation of the MXene lattice through Raman spectroscopic analysis. Distinct spectral markers were related to structural alterations within the Ti3C2Tx material after subjecting it to thermal- and laser-induced degradation. During the degradation processes, spectral markers were revealed for several specific steps: a decrease in the number of interlayer water molecules, a decrease in the number of -OH groups, formation of C-C bonds, oxidation of the lattice, and formation of TiO2 nanoparticles (first anatase, followed by rutile). By tracking of position shifts and intensity changes for Ti3C2Tx, the spectral markers that signify the initiation of each step were found. This spectroscopic approach enhances our understanding of the degradation pathways of MXene, and facilitating enhanced and dependable integration of these materials into devices for diverse applications, from energy storage to sensors.

A tetrahedral neptunium(V) complex.

Neptunium is an actinide element sourced from anthropogenic production, and, unlike naturally abundant uranium, its coordination chemistry is not well developed in all accessible oxidation states. High-valent neptunium generally requires stabilization from at least one metal-ligand multiple bond, and departing from this structural motif poses a considerable challenge. Here we report a tetrahedral molecular neptunium(V) complex ([Np5+(NPC)4][B(ArF5)4], 1-Np) (NPC = [NPtBu(pyrr)2]-; tBu = C(CH3)3; pyrr = pyrrolidinyl (N(C2H4)2); B(ArF5)4 = tetrakis(2,3,4,5,6-pentafluourophenyl)borate). Single-crystal X-ray diffraction, solution-state spectroscopy and density functional theory studies of 1-Np and the product of its proton-coupled electron transfer (PCET) reaction, 2-Np, demonstrate the unique bonding that stabilizes this reactive ion and establishes the thermochemical and kinetic parameters of PCET in a condensed-phase transuranic complex. The isolation of this four-coordinate, neptunium(V) complex reveals a fundamental reaction pathway in transuranic chemistry.

Tin Halide Perovskite Epitaxial Films on Gold Surfaces: Atomic Structure and Stability

AbstractTin‐based halide perovskite solar cells can be efficient and environmentally friendly substitutions to lead‐based halide perovskite solar cells, but they have a drawback due to oxidation from Sn2+ to Sn4+. Using vacuum deposition, epitaxially aligned CsSnBr3 ultrathin films are prepared on Au(111) and Au(100) and characterized with scanning tunneling microscopy (STM), low‐energy electron diffraction (LEED), and X‐ray photoelectron spectroscopy (XPS). By co‐evaporation of the precursor molecules CsBr and SnBr2, few monolayers of perovskite are obtained. On Au(111), CsSnBr3 grows in three differently oriented domains due to the hexagonal symmetry of the substrate. On Au(100), which has square symmetry, identical to CsSnBr3, but with about half the lattice constant of the perovskite, a (2×2) superstructure is observed. The perovskite is terminated with the (001) facet showing a square surface structure in agreement with density functional theory (DFT) calculations. Chemical analysis is performed in ultra‐high vacuum (UHV) conditions and no indication of a tin oxidation state higher than Sn2+ is found in the films. However, after exposure to air, rapid and severe changes in the films are observed, highlighting the importance of preparing tin perovskites in a controlled environment to maintain their stability and avoid oxidation‐related issues.

Carbon Corrosion Induced by Surface Defects Accelerates Degradation of Platinum/Graphene Catalysts in Oxygen Reduction Reaction.

Graphene supported electrocatalysts have demonstrated remarkable catalytic performance for oxygen reduction reaction (ORR). However, their durability and cycling performance are greatly limited by Oswald ripening of platinum (Pt) and graphene support corrosion. Moreover, comprehensive studies on the mechanisms of catalysts degradation under 0.6-1.6V versus RHE (Reversible Hydrogen Electrode) is still lacking. Herein, degradation mechanisms triggered by different defects on graphene supports are investigated by two cycling protocols. In the start-up/shutdown cycling (1.0-1.6V vs.RHE), carbon oxidation reaction (COR) leads to shedding or swarm-like aggregation of Pt nanoparticles (NPs). Theoretical simulation results show that the expansion of vacancy defects promotes reaction kinetics of the decisive step in COR, reducing its reaction overpotential. While under the load cycling (0.6-1.0V vs.RHE), oxygen containing defects lead to an elevated content of Pt in its oxidation state which intensifies Oswald ripening of Pt. The presence of vacancy defects can enhance the transfer of electrons from graphene to the Pt surface, reducing the d-band center of Pt and making it more difficult for the oxidation state of platinum to form in the cycling. This work will provide comprehensive understanding on Pt/Graphene catalysts degradation mechanisms.

APOST-3D: Chemical concepts from wavefunction analysis

Open-source APOST-3D software features a large number of wavefunction analysis tools developed over the past 20 years, aiming at connecting classical chemical concepts with the electronic structure of molecules. APOST-3D relies on the identification of the atom in the molecule (AIM), and several analysis tools are implemented in the most general way so that they can be used in combination with any chosen AIM. Several Hilbert-space and real-space (fuzzy atom) AIM definitions are implemented. In general, global quantities are decomposed into one- and two-center terms, which can also be further grouped into fragment contributions. Real-space AIM methods involve numerical integrations, which are particularly costly for energy decomposition schemes. The current version of APOST-3D features several strategies to minimize numerical error and improve task parallelization. In addition to conventional population analysis of the density and other scalar fields, APOST-3D implements different schemes for oxidation state assignment (effective oxidation state and oxidation states localized orbitals), molecular energy decomposition schemes, and local spin analysis. The APOST-3D platform offers a user-friendly interface and a comprehensive suite of state-of-the-art tools to bridge the gap between theory and experiment, representing a valuable resource for both seasoned computational chemists and researchers with a focus on experimental work. We provide an overview of the code structure and its capabilities, together with illustrative examples.

La-based Transition Metal Oxide Perovskites as Electrocatalysts for Electrochemical Carbon Dioxide Reduction

We report here the feasibility of using LaTMO3-based perovskites (TM = Co, Cr, Fe, Mn, Ni, i.e., non-Cu 3d transition metals) as electrocatalysts for electrochemical CO2 reduction reaction (eCO2RR). Phase pure LaTMO3 perovskites, having TM-ions in multiple oxidation states for all and O-defects for LaFeO3 and LaNiO3, have been synthesized and tested as electrocatalysts for eCO2RR in flow cell type set-up. The above characteristics of the La-TM-oxides have been found to influence the current densities during eCO2RR at the various applied potentials, with favorable effects of the presence of O-defects (as for LaFeO3 and LaNiO3). Upon eCO2RR, both C1 and C2 liquid products have been obtained, including ethanol, with a partial current density of −2.66 mA cm−2 at −1.2 V vs RHE (for LaFeO3). The types of products and the faradic efficiencies have been found to depend on the TM-ion present (in the LaTMO3); in particular, the oxidation state(s), associated O-defect(s) and electronic conductivity. Furthermore, the electrocatalysts have been found to be stable during eCO2RR. Overall, the present work highlights the potential of La-TM-oxide perovskites for usage as stable electrocatalysts for eCO2RR, and also provides insights into the proper selection of “TM” and reaction conditions for obtaining the desired product(s).

Speciation of antimony and vanadium in municipal solid waste incineration ashes analyzed by XANES spectroscopy

AbstractThe use of ashes from municipal solid waste incineration as secondary building materials is an important pillar for the circular economy in Germany. However, leaching of potential toxic elements from these materials must be at environmentally acceptable levels. Normally, a three-month ageing period immobilizes most hazardous heavy metals, but antimony (Sb) and vanadium (V) showed previously unusual leaching. In order to clarify the mechanisms, we analyzed the Sb and V species in various bottom and fly ashes from municipal waste incineration by XANES spectroscopy. Antimony oxidizes from Sb(+ III) species used as flame retardants in plastics to Sb(+ V) compounds during waste incineration. However, owing to the similarity of different Sb(+ V) compound in the Sb K- and L-edge XANES spectra, it was not possible to accurately identify an exact Sb(+ V) species. Moreover, V is mainly present as oxidation state + V compound in the analyzed ashes. However, the coarse and magnetic fraction of the bottom ashes contain larger amounts of V(+ III) and V(+ IV) compounds which might enter the waste incineration from vanadium carbide containing steel tools. Thus, Sb and V could be critical potential toxic elements in secondary building materials and long-term monitoring of the release should be taken into account in the future.

Mitochondria-targeting metallodrugs for cancer therapy: perspectives from cell death modes.

Mitochondria, recognized as the cellular powerhouses, are indispensable organelles responsible for crucial cellular processes, such as energy metabolism, material synthesis, and signaling transduction. Their intricate involvement in a broad spectrum of diseases, particularly cancer, has propelled the exploration of mitochondria-targeting treatment as a promising strategy for cancer therapy. Since the groundbreaking discovery of cisplatin, the trajectory of research on the development of metal complexes have been marked by continuous advancement, giving rise to a diverse array of metallodrugs characterized by variations in ligand types, metal center properties, and oxidation states. By specifically targeting mitochondria, these metallodrugs exhibit the remarkable ability to elicit various programmed cell death pathways, encompassing apoptosis, autophagy, and ferroptosis. This review primarily focuses on recent developments in transition metal-based mitochondria-targeting agents, offering a comprehensive exploration of their capacity to induce distinct cell death modes. The aim is not only to disseminate knowledge but also to stimulate an active field of research toward new clinical applications and novel anticancer mechanisms.

The potential neuroprotective of luteolin against acetamiprid-induced neurotoxicity in the rat cerebral cortex

Acetamiprid is a class of neuroactive insecticides widely used to control insect pests. The current study aimed to investigate the potential neuroprotective effects of luteolin against acetamiprid-induced neurotoxicity in the rat cerebral cortex. Four equal groups of adult male rats (10 in each): control, acetamiprid (40 mg/kg for 28 days), luteolin (50 mg/kg for 28 days), and acetamiprid+luteolin cotreatment were used. Acetamiprid was shown to alter the oxidative state by increasing oxidant levels [nitric oxide (NO) and malondialdehyde (MDA)] and decreasing antioxidants [glutathione (GSH), glutathione peroxidase (GPx), glutathione reductase (GR), superoxide dismutase (SOD), and catalase-(CAT)], with increased activity of nuclear factor erythroid 2–related factor 2-(Nrf2). Likewise, acetamiprid increases the inflammatory response, as evidenced by increased interleukin-1β (IL-1β), tumor necrosis factor-α (TNF-α), and nuclear factor kappa B-(NF-κB). In contrast, the treatment with luteolin brought these markers back to levels close to normal, showing that it protects neurocytes from oxidative damage and the neuroinflammation effects of acetamiprid-induced inflammation. Luteolin also demonstrated a neuroprotective role via the modulation of acetylcholinesterase (AChE) activity in the cerebral cortex tissue. Histopathology showed severe neurodegenerative changes, and apoptotic cells were seen in the acetamiprid-induced cerebral cortex layer, which was evident by increased protein expression levels of Bax and caspase-3 and decreased Bcl-2 levels. Histochemistry confirmed the neuronal degeneration, as proven by the change in neurocyte colour from brown to black when stained with a silver stain. Luteolin may have a neuroprotective effect against biochemical and histopathological changes induced by acetamiprid in the rat cerebral cortex.