Oxidative Cleavage Research Articles

Directional Formation of Reactive Oxygen Species via a Non-Redox Catalysis Strategy that Bypasses Electron Transfer Process.

A broad range of chemical transformations driven by catalytic processes necessitate the electron transfer between catalyst and substrate. The redox cycle limitation arising from the inequivalent electron donation and acceptance of the involved catalysts, however, generally leads to their deactivation, causing substantial economic losses and environmental risks. Here we provide a "non-redox catalysis" strategy wherein the catalytic units were constructed by atomic Fe and B as dual active sites to create tensile force and electric field, which allowed directional self-decomposition of peroxymonosulfate (PMS) molecules through internal electron transfer to form singlet oxygen, bypassing the need of electron transfer between catalyst and PMS. The proposed catalytic approach with non-redox cycling of catalyst contributed to excellent stability of the active centers, while the generated reactive oxygen species found high efficiency in long-term catalytic pollutant degradation and selective organic oxidation synthesis in aqueous phase. This work offers new avenue for directional substrate conversion, which holds promise to advance the design of alternative catalytic pathways for sustainable energy conversion and valuable chemical production. This article is protected by copyright. All rights reserved.

Protein-Labeling Reagents Selectively Activated by Copper(I).

Copper is an essential trace element that participates in many biological processes through its unique redox cycling between cuprous (Cu+) and cupric (Cu2+) oxidation states. To elucidate the biological functions of copper, chemical biology tools that enable selective visualization and detection of copper ions and proteins in copper-rich environments are required. Herein, we describe the design of Cu+-responsive reagents based on a conditional protein labeling strategy. Upon binding Cu+, the probes generated quinone methide via oxidative bond cleavage, which allowed covalent labeling of surrounding proteins with high Cu+ selectivity. Using gel- and imaging-based analyses, the best-performing probe successfully detected changes in the concentration of labile Cu+ in living cells. Moreover, conditional proteomics analysis suggested intramitochondrial Cu+ accumulation in cells undergoing cuproptosis. Our results highlight the power of Cu+-responsive protein labeling in providing insights into the molecular mechanisms of Cu+ metabolism and homeostasis.

Computational investigation of cis-1,4-polyisoprene binding to the latex-clearing protein LcpK30.

Latex clearing proteins (Lcps) catalyze the oxidative cleavage of the C = C bonds in cis-1,4-polyisoprene (natural rubber), producing oligomeric compounds that can be repurposed to other materials. The active catalytic site of Lcps is buried inside the protein structure, thus raising the question of how the large hydrophobic rubber chains can access the catalytic center. To improve our understanding of hydrophobic polymeric substrate binding to Lcps and subsequent catalysis, we investigated the interaction of a substrate model containing ten carbon-carbon double bonds with the structurally characterized LcpK30, using multiple computational tools. Prediction of the putative tunnels and cavities in the LcpK30 structure, using CAVER-Pymol plugin 3.0.3, fpocket and Molecular Dynamic (MD) simulations provided valuable insights on how substrate enters from the surface to the buried active site. Two dominant tunnels were discovered that provided feasible routes for substrate binding, and the presence of two hydrophobic pockets was predicted near the heme cofactor. The larger of these pockets is likely to accommodate the substrate and to determine the size distribution of the oligomers. Protein-ligand docking was carried out using GOLD software to predict the conformations and interactions of the substrate within the protein active site. Deeper insight into the protein-substrate interactions, including close-contacts, binding energies and potential cleavage sites in the cis-1,4-polyisoprene, were obtained from MD simulations. Our findings provide further justification that the protein-substrate complexation in LcpK30 is mainly driven by the hydrophobic interactions accompanied by mutual conformational changes of both molecules. Two potential binding modes were identified, with the substrate in either extended or folded conformations. Whilst binding in the extended conformation was most favorable, the folded conformation suggested a preference for cleavage of a central double bond, leading to a preference for oligomers with 5 to 6 C = C bonds. The results provide insight into further enzyme engineering studies to improve catalytic activity and diversify the substrate and product scope of Lcps.

Carboxylation of Alkenes with CO2 via Photocatalytic Cleavage of C=C Double Bonds

Carboxylation of Alkenes with CO2 via Photocatalytic Cleavage of C=C Double Bonds

Fostering a Holistic Understanding of the Full Volatility Spectrum of Organic Compounds from Benzene Series Precursors through Mechanistic Modeling.

A comprehensive understanding of the full volatility spectrum of organic oxidation products from the benzene series precursors is important to quantify the air quality and climate effects of secondary organic aerosol (SOA) and new particle formation (NPF). However, current models fail to capture the full volatility spectrum due to the absence of important reaction pathways. Here, we develop a novel unified model framework, the integrated two-dimensional volatility basis set (I2D-VBS), to simulate the full volatility spectrum of products from benzene series precursors by simultaneously representing first-generational oxidation, multigenerational aging, autoxidation, dimerization, nitrate formation, etc. The model successfully reproduces the volatility and O/C distributions of oxygenated organic molecules (OOMs) as well as the concentrations and the O/C of SOA over wide-ranging experimental conditions. In typical urban environments, autoxidation and multigenerational oxidation are the two main pathways for the formation of OOMs and SOA with similar contributions, but autoxidation contributes more to low-volatility products. NOx can reduce about two-thirds of OOMs and SOA, and most of the extremely low-volatility products compared to clean conditions, by suppressing dimerization and autoxidation. The I2D-VBS facilitates a holistic understanding of full volatility product formation, which helps fill the large gap in the predictions of organic NPF, particle growth, and SOA formation.

Influence of Ti-incorporated Zeolite Topology and Pore Condensation on Vapor Phase Propylene Epoxidation Kinetics with Gaseous H2O2.

Vapor-phase propylene (C3H6) epoxidation kinetics with hydrogen peroxide (H2O2) strongly reflects the physical properties of Ti-incorporated zeolite catalysts and the presence of spectating molecules ("solvent") near active sites even without a bulk liquid phase. Steady-state turnover rates of C3H6 epoxidation and product selectivities vary by orders of magnitudes, depending on the zeolite silanol ((SiOH)x) density, pore topology (MFI, *BEA, FAU), and the quantity of condensed acetonitrile (CH3CN) molecules nearby active sites, under identical reaction mechanisms sharing activated H2O2 intermediates on Ti surfaces. Individual kinetic analyses for propylene oxide (PO) ring-opening, homogeneous diol oxidative cleavage, and homogeneous aldehyde oxidation reveal that secondary reaction kinetics following C3H6 epoxidation responds more sensitively to the changes in zeolite physical properties and pore condensation with CH3CN. Thus, higher PO selectivities achieved in hydrophilic Ti-MFI at steady-state reflect the preferential stabilization of transition states for C3H6 epoxidation (a primary reaction) relative to PO ring-opening and oxidative cleavage (secondary reactions) that solvation effects that reflect interactions among condensed CH3CN within pores and the extended pore structure.

Influence of Ti‐incorporated Zeolite Topology and Pore Condensation on Vapor Phase Propylene Epoxidation Kinetics with Gaseous H2O2

Vapor‐phase propylene (C3H6) epoxidation kinetics with hydrogen peroxide (H2O2) strongly reflects the physical properties of Ti‐incorporated zeolite catalysts and the presence of spectating molecules (“solvent”) near active sites even without a bulk liquid phase. Steady‐state turnover rates of C3H6 epoxidation and product selectivities vary by orders of magnitudes, depending on the zeolite silanol ((SiOH)x) density, pore topology (MFI, *BEA, FAU), and the quantity of condensed acetonitrile (CH3CN) molecules nearby active sites, under identical reaction mechanisms sharing activated H2O2 intermediates on Ti surfaces. Individual kinetic analyses for propylene oxide (PO) ring‐opening, homogeneous diol oxidative cleavage, and homogeneous aldehyde oxidation reveal that secondary reaction kinetics following C3H6 epoxidation responds more sensitively to the changes in zeolite physical properties and pore condensation with CH3CN. Thus, higher PO selectivities achieved in hydrophilic Ti‐MFI at steady‐state reflect the preferential stabilization of transition states for C3H6 epoxidation (a primary reaction) relative to PO ring‐opening and oxidative cleavage (secondary reactions) that solvation effects that reflect interactions among condensed CH3CN within pores and the extended pore structure.

SnO2/CoTeO3 heterojunction for smartly conducting hydrogen evolution linking to organics electrocatalytic oxidation

As a sustainable energy form, hydrogen can be most practically obtained from electrocatalytic water splitting. The familiar organics can be oxidized to more useful intermediates in chemical industries. Herein, a SnO2/(CoTeO3)2 heterojunction is designed as an electrocatalyst for hydrogen evolution reaction (HER) and organic electrocatalytic oxidation. The heterojunction has good electrocatalytic performances with overpotentials of 281 mV at 10 mA cm−2 in 1 M KOH+0.1 M glycerol, 358 mV at 10 mA cm−2 in 1 M KOH +0.33 M urea, 203 mV in 1 M KOH+0.1 M glucose, and 111 mV for HER in 1 M KOH. The glucose is electrocatalytically oxidized to gluconic acid and formic acid. Density functional theory computation shows the formation of the SnO2/(CoTeO3)2 heterojunction makes the total densities of states of SnO2 move to the Fermi level, which is beneficial for adsorption in the electrocatalysis. This work propagandizes a new avenue for heterojunction electrocatalyst is applied for organics oxidation linking to hydrogen production.

Iodine-promoted amide formation via oxidative cleavage of indoles: novel quinazoline-4(3H)-one and tryptanthrin syntheses.

A highly efficient method for the direct construction of amide bonds via a selective cleavage of C-H and C[double bond, length as m-dash]C bonds in indole structures using an iodine-promoted approach was developed. Mechanistic studies indicated the formation of superoxide radicals obtained from molecular oxygen activation as a key intermediate step, which provided a precursor for subsequent oxidative ring-opening and intermolecular cyclization. A broad range of quinazolin-4(3H)-ones and tryptanthrins were synthesized in moderate to good yields under mild and environmentally benign conditions.

Alien emergent aquatic plants develop better ciprofloxacin tolerance and metabolic capacity than one native submerged species

Antibiotic pollution and biological invasion pose significant risks to freshwater biodiversity and ecosystem health. However, few studies have compared the ecological adaptability and ciprofloxacin (CIPR) degradation potential between alien and native macrophytes. We examined growth, physiological response, and CIPR accumulation, translocation and metabolic abilities of two alien plants (Eichhornia crassipes and Myriophyllum aquaticum) and one native submerged species (Vallisneria natans) exposed to CIPR at 0, 1 and 10 mg/L. We found that E. crassipes and M. aquaticum's growth were unaffected by CIPR while V. natans was significantly hindered under the 10 mg/L treatment. CIPR significantly decreased the maximal quantum yield of PSII, actual quantum yield of PSII and relative electron transfer rate in E. crassipes and V. natans but didn't impact these photosynthetic characteristics in M. aquaticum. All the plants can accumulate, translocate and metabolize CIPR. M. aquaticum and E. crassipes in the 10 mg/L treatment group showed greater CIPR accumulation potential than V. natans indicated by higher CIPR contents in their roots. The oxidative cleavage of the piperazine ring acts as a key pathway for these aquatic plants to metabolize CIPR and the metabolites mainly distributed in plant roots. M. aquaticum and E. crassipes showed a higher production of CIPR metabolites compared to V. natans, with M. aquaticum exhibiting the strongest CIPR metabolic ability, as indicated by the most extensive structural breakdown of CIPR and the largest number of potential metabolic pathways. Taken together, alien species outperformed the native species in ecological adaptability, CIPR accumulation and metabolic capacity. These findings may shed light on the successful invasion mechanisms of alien aquatic species under antibiotic pressure and highlight the potential ecological impacts of alien species, particularly M. aquaticum. Additionally, the interaction of antibiotic contamination and invasion might further challenge the native submerged macrophytes and pose greater risks to freshwater ecosystems.

The defect-modulated UiO-66(Ce) MOFs for enhancing photocatalytic selective organic oxidations

The defect-modulated UiO-66(Ce) MOFs for enhancing photocatalytic selective organic oxidations

Mechanistic insights of efficient aromatic organic compounds oxidation using biochar derived from coking wastewater sludge

Coking wastewater sludge possessed potential environmental hazards and pyrolysis was a desirable approach which could converted it into one functional carbonous material. The sludge-based biochar (SC-N3) originated from the feedstock of sludge from the regenerated water treatment had various iron-containing species and exhibited the effective catalytic ability. Compared with the degradation of the four pollutants (i.e., phenol, pyridine, quinoline and indole) alone, the mixed of the four pollutants in simulated coking wastewater exhibited a prominent different degradation trend, where the removal rates of indole and quinoline were enhanced from 45% and 30% to 98.9% and 82.3%, respectively. The quinone intermediates from phenol degradation, played a critical role in enhancing the removal rates of indole and quinoline as the electron transfer medium. Both the free radical pathway dominated by •OH and non-radical pathway with 1O2 play the main role in indole degradation, while •OH was the main factor in the catalytic degradation of phenol, quinoline and pyridine. By analysis the intermediates elucidated by Fourier transform ion cyclotron resonance mass spectrometry and three-dimensional excitation-emission matrix fluorescence spectra, the degradation molecular characteristics and pathways of the four pollutants in simulated coking wastewater were deciphered. The findings indicated that the catalyst SC-N3 prepared from the coking wastewater sludge presented unique catalytic properties and possessed a promising application in the degradation of refractory wastewater.

Oxygenolytic cleavage of 1,2-diols with dioxygen by a mononuclear nonheme iron complex: Mimicking the reaction of myo-inositol oxygenase

A mononuclear iron(II) complex, [(TpPh2)FeII(OTf)(CH3CN)] (TpPh2 = hydrotris(3,5-diphenylpyrazol-1-yl)borate, OTf = triflate) has been isolated and its efficiency toward the aliphatic CC bond cleavage reaction of 1,2-diols with dioxygen has been investigated. Separate reactions between the iron(II)-triflate complex and different 1,2-diolates form the corresponding iron(II)-diolate complexes in solution. While the iron(II) complex of the tetradentate TPA (tris(2-pyridylmethyl)amine) ligand is not efficient in affecting the CC cleavage of 1,2-diol with dioxygen, complex 1 displays catalytic activity to afford carboxylic acid and aldehyde. Isotope labeling studies with 18O2 reveal that one oxygen atom from dioxygen is incorporated into the carboxylic acid product. The oxygenative CC cleavage reactions occur on the 1,2-diols containing at least one α-H atom. The kinetic isotope effect value of 5.7 supports the abstraction of an α-H by an iron(III)-superoxo species to propagate the CC cleavage reactions. The oxidative cleavage of 1,2-diolates by the iron(II) complex mimics the reaction catalyzed by the nonheme diiron enzyme, myo-inositol oxygenase.

Reaction mechanism and kinetics for Pt/C and Au/C catalyzed aqueous phase glycerol oxidation to various carboxylic acids

Fundamental understanding of heterogeneously catalytic aerobic oxidation of polyol is highly desirable for sustainable and efficient chemical synthesis. Herein, based on the purpose of exploring the selectivity of various carboxylic acids on Pt-Au catalysts with different ratios, we conducted a comprehensive investigation into the reaction pathways of glycerol oxidation over pristine Pt/C and Au/C catalysts via experiments, kinetics analysis and DFT calculations. Structural characterizations revealed that Pt/C exhibits a higher metallic state and more d electrons, thus tending to strongly adsorb OH– and promote oxygen activation. Conversely, the weak oxygen activation of Au/C could be attributed to fewer cationic high valence state and d electrons. Furthermore, the Langmuir-Hinshelwood kinetic model and DFT calculations indicate both catalysts exhibit obvious differences in product distribution. Specifically, Pt demonstrated higher selectivity towards lactic acid by facilitating dehydration of C-OH in glyceraldehyde and promoting timely desorption of lactic acid species. In contrast, Au displayed more glycolic acid products caused by strengthening oxidative cleavage of C-C bond in glyceric acid. Expanding to bimetallic catalysts, it was observed that catalysts with higher Au content exhibit enhanced selectivity towards the oxidation of glyceric acid to glycolic acid, while those with a higher Pt ratio demonstrate increased selectivity for the oxidation of glycerol to lactic acid. These findings provide valuable insights for guiding the design and optimization of this catalytic process to achieve targeted product generation.

Exogenous CaCl2 reduces the oxidative cleavage of carotenoids in shredded carrots by targeting CAMTA4-mediated transcriptional repression of carotenoid degradation pathway

Exogenous CaCl2 reduces the oxidative cleavage of carotenoids in shredded carrots by targeting CAMTA4-mediated transcriptional repression of carotenoid degradation pathway

Fast and easy detection of hypochlorite by a smartphone-based fluorescent turn-on probe: Applications to water samples, zebrafish and plant imaging

We have developed a fluorescent probe DBT-Cl ((E)-2-(2-(4-(diphenylamino)benzylidene) hydrazinyl)-N,N,N-trimethyl-2-oxoethan-1-aminium chloride) for ClO− with an aggregation-induced emission (AIE) strategy depending on solvent polarity. DBT-Cl possessed a prominent solvatochromic emission property with intramolecular charge transfer (ICT) from the TPA (triphenylamine) to the amide group, which was studied by spectroscopic analysis and DFT calculations. These unique AIE properties of DBT-Cl led to the recognition of ClO− with high fluorescent selectivity. DBT-Cl quickly detected ClO− in less than 1 sec with a fluorescent color change from green to cyan. DBT-Cl had a low detection limit of 9.67 μM to ClO−. Detection mechanism of DBT-Cl toward ClO− was illustrated to be oxidative cleavage of DBT-Cl by 1H NMR titrations, ESI-mass, and DFT calculations. We established the viability for dependable detection of ClO− in actual water samples, as well as zebrafish and plant imaging. In particular, DBT-Cl was capable of easily monitoring ClO− through a smartphone application. Therefore, DBT-Cl assured a promising approach for a fast-responsive and multi-applicable ClO− probe in environmental and living organism systems.

Total Synthesis of the Sex Pheromone of Clania variegata Snellen and Its Stereoisomers.

The paulownia bagworm, Clania variegata Snell, is an economically important pest of agriculture and forests. The sex pheromone of this pest and its stereoisomers were synthesized, and two of the stereoisomers were prepared for the first time. Our strategy was efficient and mainly included the ring-opening reaction of (S)-2-methyloxirane, the coupling of chiral sulfonate, the oxidative cleavage of olefin, and Yamaguchi esterification. Moreover, the overall yields of our synthesis were 23-29%, with eight steps in the longest route.

Exceptional functionalized ionic liquid@metal–organic framework: A high-efficiency desulfurization platform for organic sulfide oxidation by reactive oxygen species

There is a challenge with designing catalysts that simultaneously possess active sites for catalyzing the generation of reactive oxygen species (ROSs) and effectively overcoming mass transfer resistance in oil–water biphasic systems. In this study, a novel, highly efficient oxidative desulfurization (ODS) strategy is proposed that uses an ILs-loaded metal–organic framework (MOF) coupled material as a catalyst. The IL@MOF ([Hnmp]HSO4@MIL-125(Ti)) coupled material prepared by loading [Hnmp]HSO4 onto MIL-125(Ti) has catalytic-adsorption synergistic capability. It demonstrated outstanding oxidative desulfurization performance by achieving nearly a 100 % removal of dibenzothiophene (DBT) from model oil with a dosage of 0.04 g IL@MOF per 10 mL of model fuel under mild conditions (50 °C, 10 min). By comparing the experimental results with the characterization data, it is suggested that [Hnmp]HSO4@MIL-125(Ti) converts superoxide radicals (•O2−) into 1O2 through oxygen vacancies (Ov) and that the catalytic action of Ti on the oxidation of DBT is primarily based on a 1O2-driven non-free radical mechanism. [Hnmp]HSO4@MIL-125(Ti) serves as a favorable medium for contact to be made between ROSs and sulfides, which indicates an efficient catalytic-adsorption synergy.

Biocatalytic Functionalities of Lignin Peroxidase-Based Systems in Lignin Depolymerization and Pollutants Removal from Environmental Matrices

Abstract Purpose of Review In the presented review, we have summarized and highlighted recent developments in the use of lignin peroxidase (LiP) to remove a variety of pollutants from water matrices. The high redox potential of LiP is underlined by its excellent catalytic functionalities in the elimination of pharmaceuticals, phenolics, dyes, polycyclic aromatic hydrocarbons (PAHs), endocrine-disrupting chemicals (EDCs), and other miscellaneous pollutants. LiP-based computational frameworks for theoretical bioremediation of multiple pollutants have also been discussed, which have prompted a rise in scientific interest. Recent Findings According to current studies, both free and immobilized LiPs are biocatalysts capable of efficient pollutant degradation and LMW transformation. Some immobilized LiP preparations demonstrated excellent recyclability, enabling its reusability in multiple catalytic cycles. Additionally, computational degradability makes it easier to comprehend the mechanisms underlying the degradation of recalcitrant pollutants. Summary The capacity of LiP to cleave C–C and C–O–C bonds has led to its widespread application as a biocatalyst. Its outstanding potential to catalyze oxidative cleavage has been effectively used in the remediation of pollutants without needing mediators. Nevertheless, we brought attention to the current LiP system in pollutants remediation and computational framework, which has generated a significant rise in scientific interest.

Rare-earth metal based Pr/Pr2(SeO3)3 Mott-Schottky heterojunction for electrocatalytic water splitting to produce hydrogen linking to organics oxidation

Hydrogen is a new free carbon emission energy form to solve the energy crisis all over the world. To obtain hydrogen, oxygen evolution reaction (OER) in the electrocatalytic water splitting has little value so it can be replaced by organics oxidation reactions, but how to fabricate the electrocatalyst is the key point. Herein, the rare-earth metal Pr and chalcogen element Se are used to construct the Pr/Pr2(SeO3)3 Mott-Schottky heterojunction, which is used as an electrocatalyst for water splitting. Amongst them, the Pr/Pr2(SeO3)3-1 heterojunction shows the superior electrocatalytic performances that the glucose oxidative reaction (GOR) overpotential is 291 mV at 10 mA cm−2 in 1 M KOH + 0.1 M glucose, and the hydrogen evolution reaction (HER) overpotential is 145 mV at 10 mA cm−2 in 1 M KOH. For the GOR process, the glucose is electrocatalytic oxidized to high-value-added gluconic acid, and the splitting voltage of Pr/Pr2(SeO3)3–1 is only 1.51 V at 10 mA cm−2, and hydrogen is also produced under the effect of “one stone two birds”.