Abstract
In-situ combustion technology (ISC) was a potential technology for efficient development of medium–low maturity shale oil reservoirs. Clarifying the exothermic behavior of organic carbon oxidation will be beneficial for better control of ISC processes. In this work, the organic carbon composition, type II kerogen and residual oil, were separated and extracted from the shale samples of typical medium–low maturity shale oil reservoirs in the Ordos Basin, China. The synchronous thermal analyzer and mass spectrometry (STA-MS), Fourier transform infrared spectroscopy (FTIR), and ROCK-EVAL VI were used to study the products, heat release, and functional group changes of type II kerogen, residual oil, and shale during the oxidation process. The results indicated that the oxidation heat release of shale mainly came from the oxidation reaction between its residual oil and type II kerogen, but the oxidation heat release range of shale was relatively lagging compared to the single residual oil or type II kerogen affected by rock debris. Secondly, under atmospheric pressure, the type II kerogen experiences obviously higher heat release than residual oil and heavy oil, indicating its superior potential of in-situ heat release. In addition, the major productions that CO, H2O, SO2, and CO2 were quantitatively characterized, with CO2 having the highest production of 882.25 mg/g. Furthermore, combined with the molecular weight, an oxidation reaction equation of type II kerogen was constructed. Finally, the oxidation kinetics parameters of type II kerogen, residual oil, and shale were determined using Friedman and Ozawa-Flynn-Wall (OFW) models. It was found that the activation energy of shale was higher than II kerogen and residual in low temperature oxidation (LTO) and fuel deposition (FD) stages. This may be due to the joint reaction between kerogen and residual oil, thus exacerbating the challenge of shale in-situ ignition. However, due to the catalytic effect of rock debris, the activation energy of shale was lower than LTO in high temperature oxidation (HTO) stage, indicating that once fuel deposition was completed, organic carbon will undergo stable combustion. This study has theoretical guidance for the numerical simulation research of ISC development technology of maturity-low shale oil reservoirs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.