Out-coupling Gratings Research Articles

Augmented reality display with high eyebox uniformity over the full field of view based on a random mask grating

Ensuring uniform illuminance in waveguide-based augmented reality (AR) display devices is crucial for providing an immersive and comfortable visual experience. However, there is a lack of a straightforward and efficient design method available to achieve illuminance uniformity over the full field of view. To address this issue, we propose a novel design that utilizes random mask gratings (RMGs) as the folding grating and the out-coupling grating. Unlike traditional approaches that modify the grating structure, we control the diffraction efficiency distribution by adjusting the filling factor of the mask while keeping the grating structure unchanged in one RMG. The grating structures are designed and optimized based on rigorous coupled wave analysis and particle swarm optimization. The feasibility of our method is verified by the simulation results in Lighttools. In the FOV range of 20°×15°, the eyebox uniformities of all fields are greater than 0.78, which can provide a good visual experience for users.

Design of single-layer color echelle grating optical waveguide for augmented-reality display.

We proposed a single-layer color echelle grating combined optical waveguide structure for an augmented-reality display. In this structure, we used echelle gratings with super-wavelength periodic scale as in-coupling, relay, and out-coupling elements. The combined propagation of three light beams in the waveguide was realized by overlapping different high diffraction orders of the RGB three primary colors, and deflection of the beam direction between gratings was achieved by conical diffraction generated by the inclined grating. Using the vector diffraction theory, the structural parameters and tolerance ranges of the three types of gratings were optimized, rendering average diffraction efficiencies of the three primary colors of the in-coupling, relay, and out-coupling gratings greater than 74%, 21%, and 35%, respectively. As a result, we obtained dual-channel one-dimensional pupil dilation of the original image and a field-of-view angle of h18.9° × v36.87°.

Fluorescence enhancement of a single germanium vacancy center in a nanodiamond by a plasmonic Bragg cavity.

Germanium vacancy (GeV) centers in diamonds constitute a promising platform for single-photon sources to be used in quantum information technologies. Emission from these color centers can be enhanced by utilizing a cavity that is resonant at the peak emission wavelength. We investigate circular plasmonic Bragg cavities for enhancing the emission from single GeV centers in nanodiamonds (NDs) at the zero phonon line. Following simulations of the enhancement for different configuration parameters, the appropriately designed Bragg cavities together with out-coupling gratings composed of hydrogen silsesquioxane ridges are fabricated around the NDs containing nitrogen vacancy centers deposited on a silica-coated silver surface. We characterize the fabricated configurations and finely tune the cavity parameters to match the GeV emission. Finally, we fabricate the cavity containing a single GeV-ND and compare the total decay-rate before and after cavity fabrication, finding a decay-rate enhancement of ∼5.5 and thereby experimentally confirming the feasibility of emission enhancement with circular plasmonic cavities.

Monolithic integration of ultraviolet microdisk lasers into photonic circuits in a III-nitride-on-silicon platform.

Ultraviolet microdisk lasers are integrated monolithically into photonic circuits using a III-nitride-on-silicon platform with gallium nitride (GaN) as the main waveguide layer. The photonic circuits consist of a microdisk and a pulley waveguide, terminated by out-coupling gratings. In this Letter, we measure quality factors up to 3500 under continuous-wave excitation. Lasing is observed from 374 to 399 nm under pulsed excitation, achieving low-threshold energies of 0.14mJ/cm2 per pulse (threshold peak powers of 35kW/cm2). A large peak-to-background dynamic of around 200 is observed at the out-coupling grating for small gaps of 50 nm between the disk and the waveguide. These devices operate at the limit of what can be achieved with GaN in terms of operation wavelength.

Modeling and optimizing the chromatic holographic waveguide display system.

A ray-tracing model is developed based on coupled wave theory for a volume holographic grating, which is the most important element of the holographic waveguide display but not accessibly integrated in current optical design software. The model fully and faithfully represents the angular selectivity, wavelength selectivity, polarization, and other properties for the in-coupling, out-coupling, and expansion gratings. It is especially important that the model is compatible with the current optical design software. In this paper, combining with other mature optical simulation functions of Zemax, integrated models are built for typical holographic waveguide display configurations, including image source, collimation element, gratings, waveguide plates, and approximate eye. It could provide the retina image at different viewing positions, based on which the main performance characteristics of a holographic waveguide display, such as field of view, color uniformity, eye box, and light efficiency, could be easily derived. Consequently, it provides a valuable guiding approach for the design and optimization of holographic waveguide displays.

Diffraction Efficiency Distribution of Output Grating in Holographic Waveguide Display System

Planar waveguide structure has benefits to expand the exit pupil of the near-eye display. To achieve a uniform output luminance within the expanded exit pupil, a specific distribution of diffractive efficiency (DE) should be set for the out-coupling grating. In this paper, a physical model is built to study the DE distribution of out-coupling grating with consideration of the whole field of view. Compared to the previous works, which only considered the central view angle, this model is more consistent with the actual situations to realize a uniform imaging output for a waveguide-based near-eye display system. Also, a planar waveguide with two holographic volume gratings as the in- and out-coupling gratings is fabricated to verify the proposed DE distribution. In experiments, a spatial light modulator is applied as the spatial luminance modulator, and the coupling grating with the proposed DE distribution is fabricated by the holographic interference exposure setup. The results show a high consistency between the simulation and the experiment.

Paper No S16.2: See‐Through Multiaperture Near‐to‐Eye Display With Waveguide

AbstractWe describe design and manufacturing of a multiaperture near‐to‐eye (N2E) display, establish design rules, and discuss relevant properties in comparison with traditional single‐aperture devices. A grating‐coupled waveguide shifts the image laterally toward the eye‐motion box and enables see‐through functionality using the zeroth diffraction order of the outcoupling grating.

Grating couplers for broadside input and output coupling of long-range surface plasmons

Metal gratings for in-coupling a Gaussian beam incident from broadside to the long-range surface plasmon polariton (LRSPP) propagating in one direction along a membrane-supported Au slab bounded by air or water are proposed and modeled by the finite-difference time-domain method. Grating couplers for out-coupling the propagating LRSPP into free radiation directed along broadside are also investigated. Short grating designs consisting of a small number of Au bumps yield 15% to 20% in-coupling efficiencies, and about 60% out-coupling efficiencies. LRSPP back-reflections along the membrane waveguide caused by the out-coupling grating are also calculated and discussed.

Vertical-Cavity Surface-Emitting Lasers With Integrated Excitation of Surface Plasmon Polariton Modes

We report the excitation of surface plasmon polaritons (SPPs) on a thin Au layer integrated on top of the mirror of a vertical-cavity surface-emitting laser (VCSEL) along with their subsequent extraction to air. Gratings etched into the Au layer are used to couple the light in to and out of the metal film. The polarization properties of the optical emission from out-coupling gratings placed 5 mu m away from the central optical aperture are used to confirm the coupling of the VCSEL light into and out of the SPP modes. The result paves the way to compact integrated plasmonic devices.

Single-Frequency 1310-nm AlGaInAs-InP Grating-Outcoupled Surface-Emitting Lasers

Single-frequency 1310-nm grating-outcoupled surface-emitting (GSE) semiconductor lasers with output slope efficiencies exceeding 0.1 mW/mA into multimode fibers, threshold currents below 22 mA, and >30-dB sidemode suppression ratios are reported. These GSE lasers consist of 500-/spl mu/m-long active ridges that excite one end of surface-emitting second-order outcoupling gratings with 200-/spl mu/m-long first-order distributed Bragg reflector gratings terminating the laser cavities at both ends. The grating outcouplers range from 10 to 50 /spl mu/m in length. These lasers have an open eye pattern for nonreturn-to-zero signals at 2.5 Gb/s into single-mode fibers. The full-width half-maximum far-field beam divergences range from 1.5/spl deg/ /spl times/ 8/spl deg/ to 5/spl deg/ /spl times/ 8/spl deg/.

Novel bioaffinity sensors for trace analysis based on luminescence excitation by planar waveguides

We have developed a novel generation of optical bioaffinity sensors for ultra trace analysis. These sensors are based on luminescence generation in the evanescent field of high-refractive-index single-mode planar waveguides, With the waveguiding layers and the grating parameters chosen, very sharp discrimination of bulk against surface-confined excitation, in combination with high excitation intensities in the evanescent field, can be achieved, leading to unprecedented sensitivity. Experimental data of the optimization of the transducer parameters will be presented. Incoupling of excitation light is performed using diffractive gratings. Different methods for the detection of both transmitted and luminescence light will be presented. The transmitted excitation light can be detected either at the distal waveguide chip end or using a second outcoupling grating. Both isotropically emitted luminescence, collected by a lens located below the transducer substrate (‘volume detection’), and emission coupled back into the waveguiding layer can be monitored, the latter via a second outcoupling grating. First experimental results obtained in model bioaffinity assays will be presented, demonstrating the feasibility of the different detection methods mentioned above, as well as the superior sensitivity of our novel sensor configuration. In still preliminary experiments, 100 attomoles of fluorescently labelled DNA (16-mer oligonucleotide), applied at 100 femtomolar concentration, can be detected.

A pixellated grating array using photoelectrochemical etching on a GaAs waveguide

We have demonstrated and evaluated a grating array outcoupler fabricated by photoelectrochemical (PEC) etching, a manufacturable and practical approach for fabrication of grating-based III-V semiconductor waveguide devices. An array of submicron period gratings was etched into photolithographically delineated areas in a single PEC step. The fabricated devices are: 10-/spl mu/m wide rib waveguides with 0.35-/spl mu/m first-order outcoupling gratings; and 10-/spl mu/m wide rib waveguides with 10 /spl mu/m/spl times/10 /spl mu/m pixellated areas of gratings. Device characterization demonstrates the effectiveness of outcoupling grating fabrication using PEC and that the pixellated grating outcoupler is an effective and simple means of generating an optical beam array. >