Osteoblast-like Cells Research Articles

Distinctions in bone matrix nanostructure, composition, and formation between osteoblast-like cells, MG-63, and human mesenchymal stem cells, UE7T-13

Osteoblast-like cells and human mesenchymal stem cells (hMSCs) are frequently employed as osteoprogenitor cell models for evaluating novel biomaterials in bone healing and tissue engineering. In this study, the characterization of UE7T-13 hMSCs and MG-63 human osteoblast-like cells was examined. Both cells can undergo osteogenesis and produce calcium extracellular matrix; however, calcium nodules produced by MG-63 lacked a central mass and appeared flatter than UE7T-13. The absence of growing calcium nodules in MG-63 was discovered by SEM-EDX to be associated with the formation of alternating layers of cells and calcium extracellular matrix. The nanostructure and composition analysis showed that UE7T-13 had a finer nanostructure of calcium nodules with a higher calcium/phosphate ratio than MG-63. Both cells expressed high intrinsic levels of collagen type I alpha 1 chain, while only UE7T-13 expressed high levels of alkaline phosphatase, biomineralization associated (ALPL). High ALP activity in UE7T-13 was not further enhanced by osteogenic induction, but in MG-63, low intrinsic ALP activity was greatly induced by osteogenic induction. These findings highlight the differences between the two immortal osteoprogenitor cell lines, along with some technical notes that should be considered while selecting and interpreting the pertinent in vitro model.

Oncostatin M stimulates prostaglandin D2-induced osteoprotegerin and interleukin-6 synthesis in osteoblasts

Oncostatin M produced by osteal macrophages plays a significant role in fracture healing. Osteoprotegerin (OPG) secreted by osteoblasts, binds to the receptor activator of nuclear factor-κB (RANK) ligand (RANKL) as a decoy receptor and prevents RANKL from binding to RANK, resulting in bone resorption suppression. Interleukin-6 (IL-6) is a pro-inflammatory cytokine and generally regulates bone resorption. However, accumulating evidence suggests that IL-6 plays pivotal roles in bone formation. We previously showed that prostaglandin D2 (PGD2) induces OPG synthesis by activating p38 mitogen-activated protein (MAP) kinase, stress-activated protein kinase/c-Jun N-terminal kinase (SAPK/JNK), and p44/p42 MAP kinase in osteoblast-like MC3T3-E1 cells. Furthermore, we demonstrated that PGD2 stimulates IL-6 synthesis by activating p38 MAP kinase and p44/p42 MAP kinase in MC3T3-E1 cells. In the present study, we investigated whether oncostatin M affects PGD2-stimulated OPG and IL-6 synthesis in MC3T3-E1 cells through MAP kinase activation. The osteoblast-like MC3T3-E1 cells and normal human osteoblasts were treated with oncostatin M and subsequently stimulated with PGD2. Consequently, oncostatin M significantly increased the PGD2-stimulated OPG and IL-6 release in both cells. Oncostatin M significantly enhanced mRNA expression levels of OPG and IL-6 induced by PGD2 similarly in both cells. Regarding the signaling mechanism, oncostatin M did not affect the phosphorylation of p38 MAP kinase, SAPK/JNK, and p44/p42 MAP kinase. Our results suggest that oncostatin M upregulates the PGD2-stimulated OPG and IL-6 synthesis in osteoblasts and therefore affects bone remodeling. However, OPG and IL-6 synthesis are not mediated through p38 MAP kinase, p44/p42 MAP kinase, or SAPK/JNK pathways.

Influence of scandium on mechanical properties, degradation behavior, and cytocompatibility of Zn-3Cu-0.4Li-xSc alloys for implant applications

Zinc (Zn)-based alloys have emerged as promising new biodegradable materials owing to their moderate corrosion rates and potential biological functionalities. Nevertheless, as-cast pure Zn and its alloys possess low mechanical strength, poor ductility and low hardness, which hinders their biomedical application. In this study, biodegradable Zn-3Cu-0.4Li (ZCL) and ZCL-xSc (x = 0.20, 0.35 and 0.55 wt.%) alloys were fabricated by casting and further hot-rolled (HR), with the aim of acquiring satisfactory mechanical, corrosion and biocompatibility properties for orthopedic implant applications. Results indicated that the mechanical properties of HR ZCL and ZCL-xSc alloys were significantly improved compared to the as-cast alloys. The HR ZCL-0.20Sc alloy showed the best combination of mechanical properties: yield strength of 277 MPa; ultimate tensile strength of 337 MPa; elongation of 40%; and a microhardness of 113 HV. The nanohardness of HR ZCL–xSc alloys increased from 1.64 to 2.43 GPa with increasing Sc content from 0 to 0.55 wt.%. Degradation rates of HR ZCL-xSc alloys gradually increased with increasing Sc content, with the HR ZCL-0.55Sc alloy showing the lowest corrosion resistance and the highest degradation rate of 50.1 μm/y after immersion in Hanks’ balanced salt solution for 30 d. In vitro cytocompatibility assessment using human osteoblast-like SaOS2 cells showed high cell viabilities after 1 d of exposure to undiluted extracts of HR ZCL and ZCL-xSc alloys, and also after 5 d with 50% diluted extracts. Overall, the HR ZCL-0.20Sc alloy has great potential as a biodegradable bone-implant material, due to excellent mechanical, satisfactory corrosion and good biocompatibility properties.

Effect of pectin on the crystallization of strontium substituted HA for bone reconstruction application

The biomacropolymers of bone extracellular matrix (ECM) guide the growth of hydroxyapatite (HA) with various ionic substitutions. Pectin, a plant polysaccharide with chemical similarities to ECM, was investigated for its potential to promote the crystallization of strontium-substituted HA (SH). The influence of pectin (0.5 and 1.0 wt%) on the in situ mineralization of SH (10 and 30 mol% calcium substitution with strontium) was studied. The preferential affinity of pectin to strontium over calcium favoured the incorporation of strontium in apatite, decreased crystal size (18.85–26.22 nm) and retained more pectin residues (8–16%). The residual pectin strongly interacted with small SH particles, resulting in high microhardness (0.43–0.85 GPa) and high surface charge (−32.1 to −30.3 mV), while weak interaction with large HA particles resulted in low microhardness (0.15–0.25 GPa) and low surface charge (−35.4 to −34.6 mV). The in vitro cellular study using human osteoblast-like MG-63 cells demonstrated that inorganic size and material crystallinity play a vital role in regulating osteogenesis. The study suggests that the synchronization of low pectin concentration (0.5 wt%) and high strontium substitution in HA (30 mol%) offers the desired microhardness and in vitro osteogenic properties to emulate natural bone.

Caspase-3/GSDME-mediated pyroptosis leads to osteogenic dysfunction of osteoblast-like cells.

Cell pyroptosis is implicated in progressive bone loss in dental inflammatory diseases. We induced caspase-3/Gasdermin E (GSDME)-mediated pyroptosis in osteoblast-like cells and evaluated the effects on osteogenesis. Osteoblast-like cells were treated with various concentrations of sodium butyrate (NaB) to identify the most appropriate for inducing caspase-3/GSDME-mediated pyroptosis. Cells were divided into control, NaB and NaB+Ac-DEVD-CHO (specific caspase-3 inhibitor) groups. Pyroptosis level was evaluated by immunofluorescence, morphological observation, flow cytometry, lactate dehydrogenase (LDH) release assays, mRNA and protein levels of pyroptosis-related markers. Then, inflammation level, osteoprotegerin (OPG) and receptor activator of nuclear factor-κB ligand (RANKL) expression and osteogenic function were detected. Treatment with 10 mM NaB increased caspase-3 expression, GSDME cleavage, LDH release and the number of pyroptotic cells, with morphologic changes, indicating GSDME-mediated pyroptosis induction. The pyroptosis-related changes were abolished by caspase-3 inhibition. Caspase-3/GSDME-mediated pyroptosis triggered the expression of inflammatory cytokines and RANKL, downregulated alkaline phosphatase (ALP) activity, mineralisation level, mRNA and protein levels of multiple osteogenic markers. These effects were partly reversed by Ac-DEVD-CHO. Caspase-3/GSDME-mediated pyroptosis induced by NaB activated the inflammatory response, reduced osteogenic differentiation and disturbed OPG/RANKL axis, leading to osteogenic dysfunction in osteoblast-like cells.

B4GALNT3 regulates glycosylation of sclerostin and bone mass

Global sclerostin inhibition reduces fracture risk efficiently but has been associated with cardiovascular side effects. The strongest genetic signal for circulating sclerostin is in the B4GALNT3 gene region, but the causal gene is unknown. B4GALNT3 expresses the enzyme beta-1,4-N-acetylgalactosaminyltransferase 3 that transfers N-acetylgalactosamine onto N-acetylglucosaminebeta-benzyl on protein epitopes (LDN-glycosylation). To determine if B4GALNT3 is the causal gene, B4galnt3-/- mice were developed and serum levels of total sclerostin and LDN-glycosylated sclerostin were analysed and mechanistic studies were performed in osteoblast-like cells. Mendelian randomization was used to determine causal associations. B4galnt3-/- mice had higher circulating sclerostin levels, establishing B4GALNT3 as a causal gene for circulating sclerostin levels, and lower bone mass. However, serum levels of LDN-glycosylated sclerostin were lower in B4galnt3-/- mice. B4galnt3 and Sost were co-expressed in osteoblast-lineage cells. Overexpression of B4GALNT3 increased while silencing of B4GALNT3 decreased the levels of LDN-glycosylated sclerostin in osteoblast-like cells. Mendelian randomization demonstrated that higher circulating sclerostin levels, genetically predicted by variants in the B4GALNT3 gene, were causally associated with lower BMD and higher risk of fractures but not with higher risk of myocardial infarction or stroke. Glucocorticoid treatment reduced B4galnt3 expression in bone and increased circulating sclerostin levels and this may contribute to the observed glucocorticoid-induced bone loss. B4GALNT3 is a key factor for bone physiology via regulation of LDN-glycosylation of sclerostin. We propose that B4GALNT3-mediated LDN-glycosylation of sclerostin may be a bone-specific osteoporosis target, separating the anti-fracture effect of global sclerostin inhibition, from indicated cardiovascular side effects. Found in acknowledgements.

Toll-Like Receptor 3 Mediates Aortic Stenosis Through a Conserved Mechanism of Calcification.

Calcific aortic valve disease (CAVD) is characterized by a phenotypic switch of valvular interstitial cells to bone-forming cells. Toll-like receptors (TLRs) are evolutionarily conserved pattern recognition receptors at the interface between innate immunity and tissue repair. Type I interferons (IFNs) are not only crucial for an adequate antiviral response but also implicated in bone formation. We hypothesized that the accumulation of endogenous TLR3 ligands in the valvular leaflets may promote the generation of osteoblast-like cells through enhanced type I IFN signaling. Human valvular interstitial cells isolated from aortic valves were challenged with mechanical strain or synthetic TLR3 agonists and analyzed for bone formation, gene expression profiles, and IFN signaling pathways. Different inhibitors were used to delineate the engaged signaling pathways. Moreover, we screened a variety of potential lipids and proteoglycans known to accumulate in CAVD lesions as potential TLR3 ligands. Ligand-receptor interactions were characterized by in silico modeling and verified through immunoprecipitation experiments. Biglycan (Bgn), Tlr3, and IFN-α/β receptor alpha chain (Ifnar1)-deficient mice and a specific zebrafish model were used to study the implication of the biglycan (BGN)-TLR3-IFN axis in both CAVD and bone formation in vivo. Two large-scale cohorts (GERA [Genetic Epidemiology Research on Adult Health and Aging], n=55 192 with 3469 aortic stenosis cases; UK Biobank, n=257 231 with 2213 aortic stenosis cases) were examined for genetic variation at genes implicated in BGN-TLR3-IFN signaling associating with CAVD in humans. Here, we identify TLR3 as a central molecular regulator of calcification in valvular interstitial cells and unravel BGN as a new endogenous agonist of TLR3. Posttranslational BGN maturation by xylosyltransferase 1 (XYLT1) is required for TLR3 activation. Moreover, BGN induces the transdifferentiation of valvular interstitial cells into bone-forming osteoblasts through the TLR3-dependent induction of type I IFNs. It is intriguing that Bgn-/-, Tlr3-/-, and Ifnar1-/- mice are protected against CAVD and display impaired bone formation. Meta-analysis of 2 large-scale cohorts with >300 000 individuals reveals that genetic variation at loci relevant to the XYLT1-BGN-TLR3-interferon-α/β receptor alpha chain (IFNAR) 1 pathway is associated with CAVD in humans. This study identifies the BGN-TLR3-IFNAR1 axis as an evolutionarily conserved pathway governing calcification of the aortic valve and reveals a potential therapeutic target to prevent CAVD.

Bone marrow mesenchymal stem cells paracrine TGF-β1 to mediate the biological activity of osteoblasts in bone repair.

Bone marrow mesenchymal stem cells (BMSCs) are an important source of seed cells for regenerative medicine and tissue engineering therapy. BMSCs have multiple differentiation potentials and can release paracrine factors to facilitate tissue repair. Although the role of the osteogenic differentiation of BMSCs has been fully confirmed, the function and mechanism of BMSC paracrine factors in bone repair are still largely unclear. This study aimed to determine the roles of transforming growth factor beta-1 (TGF-β1) produced by BMSCs in bone tissue repair. To confirm our hypothesis, we used a Transwell system to coculture hBMSCs and human osteoblast-like cells without contact, which could not only avoid the interference of the osteogenic differentiation of hBMSCs but also establish the cell-cell relationship between hBMSCs and human osteoblast-like cells and provide stable paracrine substances. In the transwell coculture system, alkaline phosphatase activity, mineralized nodule formation, cell migration and chemotaxis analysis assays were conducted. Osteogenesis, migration and chemotaxis of osteoblast-like cells were regulated by BMSCs in a paracrine manner via the upregulation of osteogenic and migration-associated genes. A TGF-β receptor I inhibitor (LY3200882) significantly antagonized BMSC-induced biological activity and related gene expression in osteoblast-like cells. Interestingly, coculture with osteoblast-like cells significantly increased the production of TGF-β1 by BMSCs, and there was potential intercellular communication between BMSCs and osteoblast-like cells. Our findings provide evidence that the biological mechanism of BMSC-produced TGF-β1 promotes bone regeneration and repair, providing a theoretical basis and new directions for the application of BMSC transplantation in the treatment of osteonecrosis and bone injury.

PD03-01 FGF-23 PRODUCTION COUPLING WITH ALDOSTERONE AND PREDICTING CLINICAL OUTCOMES IN PRIMARY ALDOSTERONISM

You have accessJournal of UrologyCME1 Apr 2023PD03-01 FGF-23 PRODUCTION COUPLING WITH ALDOSTERONE AND PREDICTING CLINICAL OUTCOMES IN PRIMARY ALDOSTERONISM Jeff Chueh, Shuo-Meng Wang, VinCent Wu, and Kang-Yung Peng Jeff ChuehJeff Chueh More articles by this author , Shuo-Meng WangShuo-Meng Wang More articles by this author , VinCent WuVinCent Wu More articles by this author , and Kang-Yung PengKang-Yung Peng More articles by this author View All Author Informationhttps://doi.org/10.1097/JU.0000000000003220.01AboutPDF ToolsAdd to favoritesDownload CitationsTrack CitationsPermissionsReprints ShareFacebookLinked InTwitterEmail Abstract INTRODUCTION AND OBJECTIVE: Higher fibroblast growth factor-23 (FGF-23) levels are associated with activating renin-angiotensin-aldosterone system (RAAS), more volume overload, and hypertension. The roles of FGF-23 in primary aldosteronism (PA) haven't been studied. METHODS: Unilateral PA (uPA) patients who underwent adrenalectomy were enrolled and followed for their clinical outcomes from Aug 15 to Jan 19. The FGF-23 expression in a rat osteoblast-like cell culture was evaluated after the addition of aldosterone. RESULTS: A total of 121 uPA patients & 69 matched essential hypertension (EH) controls were enrolled. The log [carboxyl-terminal FGF-23 (cFGF-23)] level was higher in uPA patients (p=0.001).] In Cox proportional hazard model, the preoperative Log [plasma cFGF-23]>1.98 was a risk factor for either all-cause mortality and cardiovascular or kidney events (HR, 4.01, p=0.038). Plasma cFGF-23 levels were increased in a nonlinear manner re: plasma aldosterone concentration (PAC). Log [plasma cFGF-23]>1.75 independently predicted post-op remission of hypertension (odds ratio (OR), 3.8, p=0.004). The plasma total FGF-23 level was significantly higher in PA patients (p<0.001), and it was significantly reduced post-op (p<0.001). When osteoblast-like UMR-106 cells were cultured with aldosterone, the cFGF-23 concentration in the culture medium was elevated (p=0.028), but it was abrogated after family with sequence similarity 20, member C (FAM20c) short hairpin RNA was added (p= 0.659). Docking experiments showed that aldosterone may bind to the potential drug binding pocket of FAM20c (Pdb: 5YH3; Figure 1A, B). CONCLUSIONS: Compared with EH controls, uPA patients had higher cFGF-23 levels--associated with a higher risk of cardiovascular composite outcomes, though such higher cFGF-23 levels predicted hypertension remission after adrenalectomy. Their total FGF-23 levels were significantly attenuated after adrenalectomy. An increase in cFGF-23 production among the uPA patients was secondary to increased cleavage of intact FGF-23 evidenced by higher FAM20c activity modulated by aldosterone. Source of Funding: Taiwan (NSC 101-2314-B-002-132-MY3, NSC100-2314-B-002-119, NSC 101-2314-B-002-085-MY3, MOST 104-2314-B-002 -125 -MY3; 111-2314-B-002-232-MY3) and NTUH 100-N1776, 101-M1953, 102-S2097 © 2023 by American Urological Association Education and Research, Inc.FiguresReferencesRelatedDetails Volume 209Issue Supplement 4April 2023Page: e74 Advertisement Copyright & Permissions© 2023 by American Urological Association Education and Research, Inc.MetricsAuthor Information Jeff Chueh More articles by this author Shuo-Meng Wang More articles by this author VinCent Wu More articles by this author Kang-Yung Peng More articles by this author Expand All Advertisement PDF downloadLoading ...

GSK3β Inhibition Reduced Vascular Calcification in Ins2Akita/+ Mice.

Endothelial-mesenchymal transition (EndMT) drives the endothelium to contribute to vascular calcification in diabetes mellitus. In our previous study, we showed that glycogen synthase kinase-3β (GSK3β) inhibition induces β-catenin and reduces mothers against DPP homolog 1 (SMAD1) to direct osteoblast-like cells toward endothelial lineage, thereby reducing vascular calcification in Matrix Gla Protein (Mgp) deficiency. Here, we report that GSK3β inhibition reduces vascular calcification in diabetic Ins2Akita/wt mice. Cell lineage tracing reveals that GSK3β inhibition redirects endothelial cell (EC)-derived osteoblast-like cells back to endothelial lineage in the diabetic endothelium of Ins2Akita/wt mice. We also find that the alterations in β-catenin and SMAD1 by GSK3β inhibition in the aortic endothelium of diabetic Ins2Akita/wt mice are similar to Mgp-/- mice. Together, our results suggest that GSK3β inhibition reduces vascular calcification in diabetic arteries through a similar mechanism to that in Mgp-/- mice.

An in vitro study into three different PRF preparations for osteogenesis potential.

To investigate the effect of Advanced Platelet-Rich Fibrin (A-PRF+), Leukocyte Platelet-Rich Fibrin (L-PRF), and injectable Platelet-Rich Fibrin (i-PRF) on osteogenesis of a human osteoblast-like cell line in vitro. Different PRF protocols are used in clinical dentistry in the last years. Recent literature documented the positive impact of PRF derivatives in vivo and in vitro, on different types of cells. However, hardly any literature comparing the new protocols for PRF (the A-PRF+ and i-PRF) with the original protocol of PRF (L-PRF) is present for osteoblast-like cells. A-PRF+, L-PRF, and i-PRF were prepared from six male donors and pre-cultured with 10mL culture medium for 6 days. 5 x103 cells/ml osteoblasts from the osteoblast cell line (U2OS) were seeded and cultured either with conditioned medium derived from the different PRF conditions or with regular culture medium. At five different time points (0, 7, 14, 21, 28 days), the osteogenic capacity of the cells was assessed with Alizarin Red S to visualize mineralization. Also in these cells, the calcium concentration and alkaline phosphatase activity were investigated. Using qPCR, the expression of alkaline phosphatase, osteocalcin, osteonectin, ICAM-1, RUNX-2, and collagen 1a was assessed. In osteoblast-like cells cultured with conditioned medium, the A-PRF+ conditioned medium induced more mineralization and calcium production after 28 days of culturing compared with the control (p< .05). No significant differences were found in the extent of cell proliferation between the different conditions. RUNX-2 and osteonectin mRNA expression in the cells were lower in all PRF-stimulated cultures compared with control at different time points. The i-PRF-conditioned medium induced more ALP activity (p< .05) compared with control and osteoblasts-like cells differentiated more compared with osteoblasts cultured with L-PRF. The three PRF preparations seem to have the capacity to increase the osteogenic potential of osteoblast-like cells. A-PRF+ seems to have the highest potential for mineralization, while i-PRF seems to have the potential to enhance early cell differentiation.

Development of triamcinolone acetonide-hyaluronic acid conjugates with selective targeting and less osteoporosis effect for rheumatoid arthritis treatments

Rheumatoid arthritis (RA) is a common systemic autoimmune disease in developed countries. In clinical treatment, steroids have been used as bridging and adjunctive therapy after disease-modifying anti-rheumatic drug administration. However, the severe side effects caused by the nonspecific targeting of organs followed by long-term administration have limited their usage in RA. In this study, poorly water-soluble triamcinolone acetonide (TA), a highly potent corticosteroid for intra-articular injection, is conjugated on hyaluronic acid (HA) for intravenous purposes with increased specific drug accumulation in inflamed parts for RA. Our results demonstrate that the designed HA/TA coupling reaction reveals >98 % conjugation efficiency in the dimethyl sulfoxide/water system, and the resulting HA-TA conjugates show lower osteoblastic apoptosis compared with that in free TA-treated osteoblast-like NIH3T3 cells. Furthermore, in a collagen-antibody-induced arthritis animal study, HA-TA conjugates enhanced the initiative targeting ability to inflame tissue and reduce the histopathological arthritic changes (score = 0). Additionally, the level of bone formation marker P1NP in HA-TA-treated ovariectomized mice (303.6 ± 40.6 pg/mL) is significantly higher than that in the free TA-treated group (143.1 ± 3.9 pg/mL), indicating the potential for osteoporotic reduction using an efficient HA conjugation strategy for the long-term administration of steroids against RA.

Towards resorbable 3D-printed scaffolds for craniofacial bone regeneration.

This review will briefly examine the development of 3D-printed scaffolds for craniofacial bone regeneration. We will, in particular, highlight our work using Poly(L-lactic acid) (PLLA) and collagen-based bio-inks. This paper is a narrative review of the materials used for scaffold fabrication by 3D printing. We have also reviewed two types of scaffolds that we designed and fabricated. Poly(L-lactic acid) (PLLA) scaffolds were printed using fused deposition modelling technology. Collagen-based scaffolds were printed using a bioprinting technique. These scaffolds were tested for their physical properties and biocompatibility. Work in the emerging field of 3D-printed scaffolds for bone repair is briefly reviewed. Our work provides an example of PLLA scaffolds that were successfully 3D-printed with optimal porosity, pore size and fibre thickness. The compressive modulus was similar to, or better than, the trabecular bone of the mandible. PLLA scaffolds generated an electric potential upon cyclic/repeated loading. The crystallinity was reduced during the 3D printing. The hydrolytic degradation was relatively slow. Osteoblast-like cells did not attach to uncoated scaffolds but attached well and proliferated after coating the scaffold with fibrinogen. Collagen-based bio-ink scaffolds were also printed successfully. Osteoclast-like cells adhered, differentiated, and survived well on the scaffold. Efforts are underway to identify means to improve the structural stability of the collagen-based scaffolds, perhaps through mineralization by the polymer-induced liquid precursor process. 3D-printing technology is promising for constructing next-generation bone regeneration scaffolds. We describe our efforts to test PLLA and collagen scaffolds produced by 3D printing. The 3D-printed PLLA scaffolds showed promising properties akin to natural bone. Collagen scaffolds need further work to improve structural integrity. Ideally, such biological scaffolds will be mineralized to produce true bone biomimetics. These scaffolds warrant further investigation for bone regeneration.

Novel Bioactive Magnesium-Hopeite composite by friction stir processing for orthopedic implant applications

Magnesium (Mg) shows excellent potential for orthopedic implant applications owing to its equivalent mechanical properties compared to cortical bone and its biocompatibility. However, the rapid degradation rate of magnesium and its alloys in the physiological environment results in losing their mechanical integrity before complete bone healing. In light of this, friction stir processing (FSP), a solid-state process, is used to fabricate Hopeite (Zn(PO4)2.4H2O) reinforced novel magnesium composite. As a result of the novel composite fabricated by FSP, grain refinement of the matrix phase occurs significantly. The samples were immersed in simulated body fluid (SBF) for in-vitro bioactivity and biodegradability tests. The corrosion behavior of pure Mg, FSP Mg, and FSP Mg-Hopeite composite samples was compared using electrochemical and immersion tests in SBF. It found that Mg-Hopeite composite has better corrosion resistance than FSP Mg and pure Mg. Because of grain refinement and the presence of secondary phase Hopeite in the composite, the mechanical properties and corrosion resistance improved. The bioactivity test was performed in the SBF environment, and a rapid apatite layer was formed on the surface of Mg-Hopeite composite samples during the test. Osteoblast-like MG63 cells were exposed to samples, and the MTT assay confirmed the non-toxicity of the FSP Mg-Hopeite composite. The wettability of the Mg-Hopeite composite was improved than pure Mg. The present research findings showed that the novel Mg-Hopeite composite fabricated by FSP is a promising candidate for orthopedic implant applications, unreported in the literature.

Modulation of MG-63 Osteogenic Response on Mechano-Bactericidal Micronanostructured Titanium Surfaces.

Despite recent advances in the development of orthopedic devices, implant-related failures that occur as a result of poor osseointegration and nosocomial infection are frequent. In this study, we developed a multiscale titanium (Ti) surface topography that promotes both osteogenic and mechano-bactericidal activity using a simple two-step fabrication approach. The response of MG-63 osteoblast-like cells and antibacterial activity toward Pseudomonas aeruginosa and Staphylococcus aureus bacteria was compared for two distinct micronanoarchitectures of differing surface roughness created by acid etching, using either hydrochloric acid (HCl) or sulfuric acid (H2SO4), followed by hydrothermal treatment, henceforth referred to as either MN-HCl or MN-H2SO4. The MN-HCl surfaces were characterized by an average surface microroughness (Sa) of 0.8 ± 0.1 μm covered by blade-like nanosheets of 10 ± 2.1 nm thickness, whereas the MN-H2SO4 surfaces exhibited a greater Sa value of 5.8 ± 0.6 μm, with a network of nanosheets of 20 ± 2.6 nm thickness. Both micronanostructured surfaces promoted enhanced MG-63 attachment and differentiation; however, cell proliferation was only significantly increased on MN-HCl surfaces. In addition, the MN-HCl surface exhibited increased levels of bactericidal activity, with only 0.6% of the P. aeruginosa cells and approximately 5% S. aureus cells remaining viable after 24 h when compared to control surfaces. Thus, we propose the modulation of surface roughness and architecture on the micro- and nanoscale to achieve efficient manipulation of osteogenic cell response combined with mechanical antibacterial activity. The outcomes of this study provide significant insight into the further development of advanced multifunctional orthopedic implant surfaces.

Functionalization of 3D Printed Scaffolds Using Polydopamine and Silver Nanoparticles for Bone-Interfacing Applications.

The prevention of bacterial colonization and the stimulation of osseointegration are two major requirements for bone-interfacing materials to reduce the incidence of complications and promote the restoration of the patient's health. The present investigation developed an effective, two-step functionalization of 3D printed scaffolds intended for bone-interfacing applications using a simple polydopamine (PDA) dip-coating method followed by the formation of silver nanoparticles (AgNPs) after a second coating step in silver nitrate. 3D printed polymeric substrates coated with a ∼20 nm PDA layer and 70 nm diameter AgNPs proved effective in hindering Staphylococcus aureus biofilm formation, with a 3000-8000-fold reduction in the number of bacterial colonies formed. The implementation of porous geometries significantly accelerated osteoblast-like cell growth. Microscopy characterization further elucidated homogeneity, features, and penetration of the coating inside the scaffold. A proof-of-concept coating on titanium substrates attests to the transferability of the method to other materials, broadening the range of applications both in and outside the medical sector. The antibacterial efficiency of the coating is likely to lead to a decrease in the number of bacterial infections developed after surgery in the presence of these coatings on prosthetics, thus translating to a reduction in revision surgeries and improved health outcomes.

Cytotoxicity Effects of Polyhydroxybutyrate/Chitosan/Bioglass Nanocomposite Scaffolds on Human Osteoblast-like Cells (SAOS-2 Cells)

Introduction: In tissue engineering, a porous material is applied as the extracellular matrix or scaffold for cell growth. Then growth factors are added to this scaffold whose cytotoxicity must be assessed. In this study, the cytotoxicity effects of polyhydroxybutyrate/chitosan/bioglass nanocomposite scaffolds on human osteoblast like cells (SAOS-2 cells) are explored.Materials &amp; Methods: This study was experimental and was done in Isfahan Dental School. The polyhydroxybutyrate/chitosan/bioglass nanocomposite scaffold was fabricated using the electrospinning method. Scanning Electron Microscopy (SEM) analysis was used to evaluate the morphological characteristics of the nanofibers and their diameter distribution. Additionally, bioglass nanoparticles in the fibers were identified via SEM. The MTT assay was performed to assess cell viability after 3, 5, and 7 days. The collected data were analyzed using SPSS 20.0 through statistical tests including Kruskal-Wallis test (p value ≤ 0.05).Results: According to SEM images, the scaffold fibers were fully porous and no beads were observed. Furthermore, the polyhydroxybutyrate/chitosan/bioglass scaffold showed greater cell viability and proliferation compared to the groups lacking bioglass.Conclusion: The polyhydroxybutyrate/chitosan/bioglass scaffold has no cytotoxic effect on osteoblast– like cells.

Towards Controlling the Local Bone Tissue Remodeling-Multifunctional Injectable Composites for Osteoporosis Treatment.

Alendronate (ALN) is the most commonly prescribed oral nitrogen-containing bisphosphonate for osteoporosis therapy. However, its administration is associated with serious side effects. Therefore, the drug delivery systems (DDS) enabling local administration and localized action of that drug are still of great importance. Herein, a novel multifunctional DDS system based on the hydroxyapatite-decorated mesoporous silica particles (MSP-NH2-HAp-ALN) embedded into collagen/chitosan/chondroitin sulfate hydrogel for simultaneous osteoporosis treatment and bone regeneration is proposed. In such a system, the hydrogel serves as a carrier for the controlled delivery of ALN at the site of implantation, thus limiting potential adverse effects. The involvement of MSP-NH2-HAp-ALN in the crosslinking process was established, as well as the ability of hybrids to be used as injectable systems. We have shown that the attachment of MSP-NH2-HAp-ALN to the polymeric matrix provides a prolonged ALN release (up to 20 days) and minimizes the initial burst effect. It was revealed that obtained composites are effective osteoconductive materials capable of supporting the osteoblast-like cell (MG-63) functions and inhibiting osteoclast-like cell (J7741.A) proliferation in vitro. The purposely selected biomimetic composition of these materials (biopolymer hydrogel enriched with the mineral phase) allows their biointegration (in vitro study in the simulated body fluid) and delivers the desired physicochemical features (mechanical, wettability, swellability). Furthermore, the antibacterial activity of the composites in in vitro experiments was also demonstrated.

PCL/Graphene Scaffolds for the Osteogenesis Process.

This study aims to characterize the osteoconductivity, optimal bioresorbable, biodegradability, biocompatibility, and mechanical properties of Poly-ε-caprolactone (PCL)/graphene (G) scaffolds at concentrations of 0.5, 1, 1.5, 2, 2.5, and 3 wt%, which are used to support bone regeneration through solvent casting and particulate leaching. The water contact angle measurement revealed a transition from a hydrophobic to a hydrophilic surface after incorporating various G concentrations. The scaffolds with 0.5 wt% G had smaller pores compared to those produced using 3 wt% G. Furthermore, numerous pores were connected, particularly those with larger diameters in the 2 and 3 wt% G samples. The proportion of water absorption varied between 50% and 350% for 4 months, with large percentages of scaffolds containing high G concentrations. Raman spectroscopy and X-ray diffraction, which were used to confirm the presence of nanofiller by increasing the ratios of ID/IG, I2D/IG, and band 2θ = 26.48°. The mechanical properties were improved by the addition of G, with a Young's modulus of 3 wt% G, four times that of PCL. Measuring cell biocompatibility, adhesion, proliferation, and differentiation with osteoblast-like (MG-63) cells revealed that PCL/G scaffolds with higher concentrations were more biocompatible than PCL as well as those with lower concentrations.

The Influence of Electrode Design on Detecting the Effects of Ferric Ammonium Citrate (FAC) on Pre-Osteoblast through Electrical Cell-Substrate Impedance Sensing (ECIS)

Detection sensitivity is a crucial factor in the application of ECIS sensors. For these biosensors, the electrode configuration has a direct impact on sensitivity, yet few studies on monopolar electrodes have been reported. In this study, ECIS sensor arrays, which have a series of working electrode configuration with a wide diameter range and different electrode number, were fabricated to monitor living osteoblast-like MC3T3-E1 cells. The experimental results revealed that when the electrode diameter was larger than 25 μm, electrodes with smaller diameter and number yielded higher impedance values and generated more impedance shift to cell status change. The membrane capacitance obtained by equivalent circuit fitting was at the same level. When the electrode diameter was even smaller, the results in detection of cell monolayer were opposite, and there was no distinct relationship between impedance and membrane capacitance shift to cell status change and electrode geometry. The proposed sensor chip, allowing for a sustained and stable detection of cellular impedance, provides the basis for the selection of the electrode configuration of monopolar electrodes. The test results of electrodes with a diameter of 25 μm and lower indicated the possibility of single cell impedance measurement, which can provide unique insight into the heterogeneous electrical behavior of cells, and, in this case, the electrode size should be close to the cell size.