Oriented Strand Board Research Articles

Identification of damage in timber I-beams using continuous wavelet transform of deflection measured with digital image correlation

The article presents a method for detecting damage in timber I-beams based on the continuous wavelet transform (CWT) of their static deflection, measured using the ARAMIS digital image correlation (DIC) system. So far, no detailed uncertainty analysis for this type of identification has been carried out. Filling this gap was the main motivation for the authors to conduct this research. For this purpose, analytical and experimental static deflection CWT analyses were performed for the timber I-beams with softwood flanges and oriented strand board webs, in which local cross-sectional weakenings were artificially introduced for verification purposes. A detailed analysis of the CWT uncertainty resulting from measurement errors and numerical data processing allowed its expression as a function of the beam axis position and the scale parameter. Based on the research, a new methodology was formulated for the diagnostic defect identification in timber beams related to bending stiffness reduction.

Augmenting bonding properties of OSB and Chinese fir hybrid cross-laminated timber by sandblasting pretreatment

The investigation was conducted into the adhesive performance within hybrid cross-laminated timber (HCLT) composed of sandblasted Chinese fir and oriented strand board (OSB) which was originally covered by cured adhesive during the manufacture leading to very fragile bonding. HCLT specimens with three layers were bonded utilizing three structural adhesives which were polyresorcinol formaldehyde (PRF), polyurethane (PUR), and polyisocyanate (EPI). Surface roughness and wettability testing ascertained that sandblasting could effectively change the original resin layer and microtopography on the surface of OSB laminates, significantly modified the level of roughness on the surface, thereby providing a basis for vertical spreading and permeating of the adhesives. Sandblasting pretreatment consistently augmented the dry bonding shear strength about all the three adhesives, achieving the most substantial increases of 53 %, 39 %, and 37 % for PRF, PUR, and EPI, respectively. The pretreatment further reducing delamination rates to about a half in cyclic delamination tests of all three adhesives. Fluorescence microscopy detection of the bonding interfaces revealed a significant increase in adhesive penetration depth which had been further confirmed by the bonding interface thickness measurement. Surface roughness generally had a negative effect on dry shear bonding strength, especially with EPI adhesive, while surface wettability was positively correlated with bonding strength and adhesive layer thickness. This study introduced an environmental and efficient method to enhance the bonding performance of HCLT.

A Review of Cradle-to-Gate Greenhouse Gas Emission Factors for Canada’s Harvested Wood Products

Abstract With the previous decade’s (2010 through 2019) greenhouse gas emissions remaining the highest on record, focus on emissions mitigation efforts is paramount. Harvested wood products (HWPs) can store carbon for various timespans depending on the product and its end uses. Life cycle inventories (LCIs) are the base for life cycle analyses (LCAs), as they represent a comprehensive catalogue of the raw data essential to complete an LCA. However, most LCI documentation is in the form of case studies of different types of HWPs, with varying LCI results that reflect varied system boundaries, case-specific conditions, and assumptions. Our goal was to conduct a systematic literature review to evaluate, analyze, and synthesize previously reported Canadian HWP data and to initiate a Canadian database based on reported cradle-to-gate HWP emission factors. HWPs were categorized as lumber, traditional structural panels, mass timber, nonstructural panels, and wood pellets. Based on our analysis, we found that softwood lumber produced the lowest cradle-to-gate emission factor (61.99 kg of CO2 equivalent [CO2eq] per m3 HWP) while I-joists produced the highest (218.55 kg of CO2eq per m3 HWP). Resource extraction emissions accounted for most of the overall emissions for softwood lumber, oriented strand board, cross-laminated timber, and glue-laminated timber. Meanwhile, manufacturing accounted for most of the emissions for plywood, I-joists, cellulosic fiberboard, particleboard, and wood pellets. Substantial gaps exist in published LCI data and, when possible, publishing detailed LCI data is encouraged to support additional HWP life cycle analyses.

Hybrid modular construction system “INNO3DJOINTS”: Experimental behaviour and numerical modelling of isolated sub-frames

With the growing demand for sustainable, cost-effective and overall-efficient building solutions, the need for dependable modular construction systems is steadily on the rise. In the present paper a novel hybrid modular construction system named INNO3DJOINTS is introduced, employing cold-formed welded steel tubular columns, fabricated according to EN 10219, and cold-formed steel thin-wall section based truss-girders, joined by the innovative plug-and-play (P&P) connector, designed to provide ease-of-assembly and -disassembly. The experimental investigation conducted on isolated sub-frame configurations of the novel system is presented, where 6 full-scale specimens were subjected to horizontal and vertical loading. The test configurations differed in the P&P joint socket thickness and the absence/presence of the light steel framing (LSF) wall, encased with oriented strand board (OSB). In addition, a numerical model for predicting the system's global behaviour is proposed, developed in SAP2000. Initially, the behaviour of the employed P&P joint configurations, categorized as partial-strength, is characterized using experimental and validated ABAQUS finite element model (FEM) data, resulting in a spring model implemented into the global FEM. Finally, the numerical and experimental results are compared and discussed, leading to conclusions regarding the system's 2D structural performance, identified behaviour governing phenomena, P&P joint influence, LSF wall and OSB contribution, as well as the capabilities of the developed FEM.

Performance of oriented strand board bonded with a hybrid phenol-formaldehyde/polymeric methylene diphenyl diisocyanate adhesives system

A hybrid adhesive system composed of phenol-formaldehyde (PF) resin and polymeric methylene diphenyl diisocyanate (pMDI), modified with two types of alkaline catalysts, namely NaOH and CaCO3 at 20% (w/v), was used for manufacturing the oriented strand board (OSB) from sengon (Paraserianthes falcataria L. Nielsen) wood. The catalyst was added at a concentration of 1% of the solids content of PF adhesive, and pMDI was added at 2.5% and 5.0% of the PF adhesive solids content. Adding catalysts and cross-linking agents increased the solids content and viscosity of the adhesive and accelerated the gelation time. The water absorption of OSB increased with the addition of catalysts and crosslinking agents compared to the control PF. Still, the CaCO3 catalyst worked optimally in reducing the thickness swelling of OSB. The mechanical properties of the laboratory-fabricated OSB panels increased with the addition of catalyst and cross-linker, except for the modulus of elasticity parallel to the grain. The optimal performance of OSB was obtained by adding 1% CaCO3 and 2.5% pMDI based on the PF’s solids content.

Hydrolytic Stability of Sengon-Oriented Strand Board Bonded with Hybrid Phenol-Formaldehyde/Polymeric Methylene Diphenyl Diisocyanate Adhesives

The hydrolytic stability of oriented strand board (OSB) is critical to guarantee good performance in humid conditions over the long term. The adhesive system impacts hydrolytic stability in addition to the wood strands. This study aims to investigate the hydrolytic stability of OSB bonded with a hybrid adhesive based on phenol-formaldehyde (PF) and polymeric methylene diphenyl diisocyanate (pMDI) modified with NaOH and CaCO3 catalyst. PF was mixed with each catalyst at approximately 1% of the PF solids content. The pMDI was added to the mixture at 2.5% and 5% of the PF solid content. The hybrid PF/pMDI adhesives were then used for OSB production. The hydrolytic stability of OSB samples was tested at 25°C and 100°C and compared with OSB using unmodified PF as a control. After hydrolysis, OSBs with hybrid PF/pMDI adhesives had lower weight loss than control adhesives at both temperatures. The pH indicates no significant polymer dissolution from the board into the hydrolysis solution. Hybrid PF/pMDI adhesives with a CaCO3 catalyst obtain significantly lower thickness swelling values. The findings of this study have significant implications for developing high-performance, environmentally-friendly OSB products. Keywords: eco-friendly composite, hydrolytic stability, oriented strand board, Paraserianthes falcataria, phenol-formaldehyde

Investigation on the propagation of uncertainties of a timber floor under human excitation

Due to the characteristics of high stiffness-weight ratio, timber floors are prone to annoying vibrations under human excitation. Given the natural origin of timber, its mechanical properties exhibit significant variability. The randomness inherent in human excitation cannot be overlooked during structural dynamic analysis. Consequently, the adoption of a stochastic approach is imperative for attaining reliable serviceability evaluation results. However, current research on human-induced vibrations in the timber floor, accounting for this randomness, remains inadequate. In this paper, an experimental investigation is conducted on the dynamic properties and human-induced responses of a timber floor composed of glued laminated timber and oriented strand board. A finite element model is developed and subsequently validated for accuracy in terms of modal properties and dynamic responses. The probability density evolution method is introduced for stochastic analysis, which demonstrates that both the natural frequency and dynamic responses of the floor exhibit considerable variability when uncertainty factors are considered. The Kullback–Leibler divergence indices are used to assess the impact of each uncertain variable quantitatively. The results indicate that the longitudinal elastic modulus has the greatest influence on the natural frequency, while the first dynamic load factor, αz1, exerts the most significant impact on dynamic responses. Notably, both material mechanical properties and load model parameters contribute to the uncertainty of dynamic responses, with the influence of the load model parameters being significantly greater than that of material mechanical properties.

A Study on the Visual and Tactile Perception of Oriented Strand Board Combined with Consumer-Preference Analysis

A Study on the Visual and Tactile Perception of Oriented Strand Board Combined with Consumer-Preference Analysis

Performance of structural insulation panels under eccentric axial and racking loads with varying opening ratios

Structural insulation panels, which are actively applied in the housing market in North America and Europe by utilizing wood, an eco-friendly material, as the main material, are composed of OSB (Oriented Strand Board), EPS (Expanded Polystyrene), and SPF (Spruce-Pine-Fir), which is used as a connection between the panels. Structural insulated panels are used as a load-bearing wall to resist external forces without installing separate columns. The production of structural insulation panels consists of applying adhesive to both sides of EPS, which acts as an insulation material, and pressing wood boards (OSB), which exert strength as a structural material. The OSB on the outside resists compressive and tensile forces, while the EPS on the inside resists shear forces. The joints and openings of the structural insulation panels are reinforced with SPF (Spruce-Pine-Fir) structural wood. When structural insulated panels are used as an exterior wall structure, the installation of openings is essential. Based on the opening size that is popularly used in wooden structures, the performance evaluation of structural insulation panels under eccentric axial load and repeated lateral load due to the reduction of the cross-sectional area by installing the opening was carried out, and the behavior analysis through variable analysis and comparison analysis with the design equation was carried out.

Flexural performance of innovative thin-walled steel–timber composite floor slabs

A floor slab carries and distributes the floor load in a structure and is an important component that affects overall structural performance. Therefore, it is important to investigate the mechanical properties of such materials. In this study, flexural performance tests under static load are conducted for an innovative thin-walled steel–timber composite floor slab, and the failure mode, bearing capacity, stiffness, deflection, and strain development are investigated. The results show that the floor slab can be quickly assembled using self-tapping and wood screws and exhibits good flexural performance. Using ABAQUS finite-element software, the effects of the oriented-strand board (OSB) thickness, thin-walled–steel-plate height, steel strength, and boundary conditions on the flexural performance of composite floor slabs are investigated. Furthermore, based on the EN1995–1-1 code and equal-section conversion principle, the simplified beam-unit model is established for the theoretical calculation of the composite floor slab. The effective bending stiffness is calculated by considering the influence of the slip modulus of the connector, and the stress distribution law of the section is analysed. The results provide a reliable design basis and reference for the application of thin-walled steel–timber composite floor slabs in engineering practice.

Locally sparse and robust partial least squares in scalar-on-function regression

We present a novel approach for estimating a scalar-on-function regression model, leveraging a functional partial least squares methodology. Our proposed method involves computing the functional partial least squares components through sparse partial robust M regression, facilitating robust and locally sparse estimations of the regression coefficient function. This strategy delivers a robust decomposition for the functional predictor and regression coefficient functions. After the decomposition, model parameters are estimated using a weighted loss function, incorporating robustness through iterative reweighting of the partial least squares components. The robust decomposition feature of our proposed method enables the robust estimation of model parameters in the scalar-on-function regression model, ensuring reliable predictions in the presence of outliers and leverage points. Moreover, it accurately identifies zero and nonzero sub-regions where the slope function is estimated, even in the presence of outliers and leverage points. We assess our proposed method’s estimation and predictive performance through a series of Monte Carlo experiments and an empirical dataset—that is, data collected in relation to oriented strand board. Compared to existing methods our proposed method performs favorably. Notably, our robust procedure exhibits superior performance in the presence of outliers while maintaining competitiveness in their absence. Our method has been implemented in the robsfplsr package in .

Effect of the percentage of MUF adhesive coverage on shear strength when bonding different wood species

Due to climate changes, it is necessary to consider the use of other wood species to replace currently used woods. This work deals with the determination of the shear strength of bonded veneers (eight European wood species: spruce, larch, pine, beech, oak, poplar, birch, and alder) with Silekol® 311 melamine-urea-formaldehyde adhesive (MUF) with a variable coverage on the surface of the samples: 10, 15, 20, 25, 30, 50, 75, and 100%. The Automated Bonding Evaluation System (ABES) was used to evaluate and compare adhesive bond strengths. The larch, beech, and oak samples exhibited greater single-lap shear strength than the control samples from spruce. There was no statistically significant difference in shear strength regarding the adhesive coverage from 100% to 20% on the surface of the samples, for almost all wood species. The results of the project provide basic information about the bonding strengths with different coverage in the adhesive layer, comparing non-commonly used wood species in wood-based composites such as oriented strand board and particleboard.

Hybrid Biopellets Characterization of Gamal Wood (Gliricidia sepium) and Robusta Coffee Husk at Various Compositions

Biopellets from gamal wood (Gliricidia sepium) as a biomass energy resource could be an alternative to replace fossil fuels due to having met standards based on moisture content, ash content, fixed carbon, calorific value, and density. Unfortunately, they still had high levels of volatile matter. Robusta coffee husk was a material with high nitrogen content, which is suspected of being able to bind aromatic substances in volatile organic compounds. This study aims to evaluate the quality of biopellets and determine the optimum composition of the biopellets from gamal wood and coffee husk. The blended composition of gamal wood and coffee husk biopellets studied were 100:0, 75:25, 50:50, 25:75, and 0:100. The biopellets were manufactured using the material size of 40-60 mesh with a pressure of 173.51 MPa. The best biopellet was produced in the composition of 75% gamal wood and 25% coffee husk, with a density of 0.85 g/cm3, moisture content of 8.03%, ash content of 3.92%, volatile substances of 78.01%, fixed carbon of 18.07%, and calorific value of 4,176 cal/g. The biopellet quality met the standards of SNI 8021:2014 and EN 14061-2, except for ash content. Adding coffee husk reduced gamal wood biopellet’s volatile matter, increasing the fixed carbon and density of gamal wood biopellets. Keywords: alkali immersion, bamboo, bio-composite, oriented strand board, pre-treatment

Evaluating the Combustion Performance of the Usual Timbers in Furniture Using a Grey Correlation Method Based on Thermolysis, Ignition, and Flame Spread

Timber is the most widely used material for furniture in view of its characteristics of light mass, high strength, easy processing, coloring, and decorative appearance. However, the flammability of wood has been frequently associated with increased fire intensity and the rapid spread of fire in buildings. In this paper, the combustion performance of six kinds of common furniture timber was investigated based on thermogravimetric analysis at 25–500 °C, cone calorimetry with 50 kW/m2 thermal radiation intensity, and flame spread experiments with 3 kW/m2 thermal radiation intensity. The ignition, weight loss, thermogenesis, smoke, and flame spread characteristics of these timbers were obtained. Subsequently, a comprehensive index system including thermal stability, heat release ability, smoke production capacity, and flame spreading speed was constructed to evaluate the combustion performance of the selected timbers. In addition, a grey correlation method relying on the game theory to assign weight was proposed for the quantitative analysis of the relevant evaluation indexes. As a result, the combustion performance of the six kinds of timber, which was defined as a specific value from poor to good, was as follows: pine (0.8696) > Chinese fir (0.8568) > Oriented Strandboard (OSB) (0.8425) > density board (0.8122) > plywood (0.8087) > elm (0.7909). Timber with poor combustion performance contributes to the reduction in fire risk in buildings. Our suggestions are of great significance for selecting furniture timber from the perspective of the prevention and control of building fires.

Experimental Investigation of Water-Based Fire Suppression Systems on External Façade Fires

The use of external fire suppression systems can reduce the risk of fire spreading between buildings. This study investigated the effectiveness and efficiency of different externally placed water-based fire suppression systems on façade fire safety. A series of large-scale experiments comprising an SP Fire 105 setup equipped with sprinklers and high-pressure water mist nozzles have been performed. A combustible façade, consisting of 2.5 cm thick oriented strand board (OSB) plates, was installed to provide challenging conditions and allow a visual assessment of the post-fire damage. The temperature profile on the façade surface was measured with 34 thermocouples, while five heat flux gauges and two fast-response plate thermocouples were used to measure the heat flux on the façade surface and emitted to the ambient. The sprinklers and the high-pressure water mist system effectively suppressed the upwards flame migration and reduced the heat flux toward adjacent buildings. It was observed that the sprinklers acted as a water curtain and kept the façade wet during the fire, promoting minor damage (the burnt area is less than 1% of the total area). The temperature and heat flux measurements demonstrated that the sprinkler system was the most effective suppression system. However, the high-pressure water mist systems achieved similar effectiveness but a much higher efficiency concerning water consumption. The sprinkler nozzles used four times as much water as the high-pressure water mist nozzles.

Effects of Prolonged Leaching on the Acute Ecotoxicity of Spruce-Pine Oriented Strand Board for Plants

In this study, the ecotoxicological effects of a selected OSB material on three model plants (green freshwater algae Desmodesmus subspicatus, duckweed Lemna minor, and seeds of lettuce Lactuca sativa) were tested. A 24 h and 168 h leachate of the same OSB material was prepared. Mg, Si, Ca, K, Fe, Zn, Mn, and Na were found in the samples. Their higher residues were measured in the 168 h leachate. Biogenic elements (N, P, C) were not detected. The acute effect was relatively slow (for algae up to 26%, for duckweed up to 20%, and for lettuce seeds with stimulation up to 37%). Prolongation of the leaching time did not show any effect on the results of the plant tests. Acute toxicity for the three plant species used was slow.

Characterization of randomly oriented strand boards manufactured from juvenile wood of underutilized wood species

The wood-based panel industry in Europe, which is dominated by the use of Norway spruce, will face new challenges due to environmental changes and the bark-beetle calamity, which started a new era of forestry. To explore the possibility of replacing spruce with other wood species, juvenile wood of nine underutilized wood species (Scots pine, European larch, poplar, willow, alder, birch, European beech, English oak and hornbeam) were used to make randomly oriented strand boards (OSBs). Single-layer OSBs were produced with 3% pMDI resin and 0.5% wax. Standard physical and mechanical properties were measured. The bending strength (MOR) values showed that there was no statistically significant difference between the values for, on the one hand, spruce (34.6 MPa) and, on the other, larch (25.9 MPa), poplar (25.2 MPa), willow (27.8 MPa), alder (34.3 MPa) or birch (27.1 MPa). A similar trend was found for the boards modulus of elasticity (MOE). The highest MOE values of 5,185 MPa and 4,472 MPa were found for spruce and alder, respectively. There was no significant difference between spruce and other wood species in internal bond strength. Boards made from high-density wood species showed better physical performance, whereas those made from low-density wood species (except pine) gave better mechanical properties. Strand-generalized characteristics, such as the slenderness ratio and specific surface, were analyzed for all investigated physical and mechanical properties. European larch, poplar, willow, and alder are potential wood species for manufacturing OSBs in future without mixing species, as they can replace spruce in the wood-based panel industry.

Chemical and Thermal Exposure Risks in a Multi Compartment Training Structure

Providing NFPA 1403 compliant live-fire training can present thermal and chemical exposure risk to instructors and students. To reduce risk, training academies, fire departments, instructors, and standards setting technical committees need more information on how different training fuels used in common training structures can impact the environment in which firefighter training occurs. This study utilized a traditional concrete training structure with multiple compartments to characterize training environments with three different fuel package materials [i.e., low density wood fiberboard, oriented strand board (OSB), and wood pallets]. Exposure risks for a fire instructor located on either the first or second floor were characterized using measurements of heat flux, air temperature and airborne concentrations of several contaminants including known, probable, or possible carcinogens. It was hypothesized that utilizing a training fuel package with solid wood pallets would result in lower concentrations of these airborne contaminants [aldehydes, polycyclic aromatic hydrocarbons (PAHs) and volatile organic compounds (VOCs)] than wood-based sheet goods containing additional resins and/or waxes. Additionally, it was hypothesized that these concentrations would be lower than in the single compartment Fire Behavior Lab presented in a companion manuscript. For all measured compounds other than hydrochloric acid, airborne concentrations were 10 to 100 times lower than in the Fire Behavior Lab. OSB-fueled fires produced the highest median concentrations of total PAHs and VOCs such as benzene, while the pallet fuel package produced the lowest median concentrations of these compounds. These trends generally followed the qualitative visual obscuration created by each fuel. Additional tests were conducted on the OSB-fueled fires with increased ventilation and an alternate means of reducing visibility through smoldering smoke barrels. This OSB experiment with increased ventilation resulted in the highest temperatures in the fire room but the lowest impact on visibility throughout the structure, as well as the lowest overall concentrations of contaminants in this study. In contrast, the smoldering straw-filled smoke barrel created a highly obscured environment (with minimal impact on thermal environment) and some of the highest concentrations of the targeted contaminants of any test. These data may be useful in balancing obscuration for training with potential exposure to thermal stressors and contaminants.

Durability ratings of post-treated wood-based composites after 14 years of field exposure

Several commercial wood-based composites (softwood plywood [SWP], hardwood plywood [HWP], medium-density fiberboard [MDF], oriented strand board [OSB], and particleboard) [PB]) were post-treated with alkaline copper quat and copper azole at two different retention levels. The treated specimens were installed on concrete blocks covered with 5-sided PVC boxes simulating the crawl space conditions (protected above-ground) in Japanese houses in Southern Japan where decay and termite activity are high. The experimental variables are a comparison of treated versus untreated, preservative type and retention levels. During 14 years of exposure, the specimens were biannually visually rated. In general, termite damage became visible earlier and the harshness of attack was higher when compared to decay damage. The untreated and treated MDFs were the most resistant under the protected above ground conditions at the end of 14 years exposure. Particleboard durability performance followed the MDF rating during the same period. The untreated OSB, HWP, and SWP were the least resistant composite types. The treatments substantially increased the durability of the mentioned composite types by 317.6%, 80.5%, and 133% higher termite grading when correlated to their untreated controls, respectfully, yet they failed to maintain full protection. Based on statistical analysis, preservative types and retention levels did not significantly affect decay and termite ratings.

Properties of oriented strand boards made from two Indonesian bamboo species at different pressure levels and strand lengths

This study aimed to evaluate the effect of bamboo species, specific pressure, and strand length on the properties of oriented strand boards (OSBs). Laboratory scale OSBs were made from two Indonesian bamboo species [tali (Gigantochloa apus) and andong (Gigantochloa pseudoarundinacea)] with three different strand lengths (75, 100, and 150 mm). For each bamboo species and strand length, OSBs were fabricated by bonding bamboo strands with 7% phenol formaldehyde resin and 0.5% wax emulsion based on their oven-dry weight. The layer structure of the face, core, and back of the three-layer cross-oriented board were 25%, 50%, and 25%, respectively. A specific pressure of 25 or 30 kg/cm2 was applied for 6 min at 160 °C. The targeted OSB density was 0.75 g/cm3. The results showed that OSBs from andong bamboo had better dimensional stability and bending strength than those from tali bamboo. The bending strength of bamboo-based OSBs increased with increased bamboo strand length. A strong interaction was found between bamboo species, specific pressure, and strand length on the mechanical properties of OSBs. The properties of all bamboo-based OSBs produced in this study conform with the requirements of the Japanese Industrial Standard JIS A 5908 (2015) and British Standard BS EN 300 (2006).