Oxidation Of Organic Substrates Research Articles

Ex Situ Electro‐Organic Synthesis – A Method for Unrestricted Reaction Control and New Options for Paired Electrolysis

AbstractClassic in situ electro‐organic synthesis with substrates in an electrolyzer must compromise process conditions to balance electro‐ and thermochemical steps at both electrodes. This often restricts efficiency and product selectivity, since requirements may deviate for electrochemical (catalyst activation) and chemical (organic synthesis) steps, as well as for paired anode‐ and cathode reactions. Breaking this barrier, we report ex situ electro‐organic synthesis as a versatile method that enables unique product selectivity and unusual product pairs. We exemplify the concept for pairing H2 evolution (HER) with anodic alcohol oxidation. The two‐step method accomplishes this by separating cathode reactions from organic substrate oxidation, and anodic electrocatalyst activation from chemical conversion of organic substrates in time and space. First, the electro‐oxidation of Ni(OH)2 anodes to NiOOH is paired with H2 production by alkaline water electrolysis. Then, “charged” NiOOH electrodes are removed from the electrolyzer and used in external vessels to oxidize model substrate benzyl alcohol under regeneration of Ni(OH)2. Free choice of reaction media outside the electrolyzer allows to selectively obtain benzoic acid (in water) or benzaldehyde (in n‐hexane), whereas classic in situ electrosynthesis only produces the acid together with H2. Perspectively, the method enables electrosynthesis of previously inaccessible products paired to H2 generation.

Novel Functional Organic Chromophores

Porphyrins and other tetrapyrroles are highly suitable for sensing operations based on their synthetic flexibility and chromophore structures where an analyte might interact to stimulate some variation in directly observable optical colour or fluorescence emission modulation. Their chromophore structures also allow access to electronic triplet states, which can be harnessed for the generation of singlet oxygen – a highly reactive species useful for photodynamic action against tumours or microorganisms. Here we discuss the sensing activity of several β-substituted porphyrins1 including not only by the introduction of suitable interacting units but also by the adaptation of non-planar porphyrins for the synthesis of porous structures. The latter are applied for film formation and sensing involving nanomechanical sensors. Selectivity and mechanisms of sensing activity are discussed. We will also introduce new efficient singlet oxygen generating materials based on agglomeration of an oxidized porphyrin chromophore as metal-organic frameworks,2 electron deficient porous polymers, or using resorcinarenes.3 The use of these materials for selective oxidation of organic substrates is demonstrated. Overall, the results demonstrate the efficacy of the chromophore approach to functional materials. The self-assembly properties of porphyrins and nitrogen rich acene compounds, the pyrazinacenes, will also be considered based on contrasting cases of on-surface mobility and immobility, and the introduction of particular functionality influencing the resulting supramolecular structures.

Protocellular Heme and Iron-Sulfur Clusters.

ConspectusCentral to the quest of understanding the emergence of life is to uncover the role of metals, particularly iron, in shaping prebiotic chemistry. Iron, as the most abundant of the accessible transition metals on the prebiotic Earth, played a pivotal role in early biochemical processes and continues to be indispensable to modern biology. Here, we discuss our recent contributions to probing the plausibility of prebiotic complexes with iron, including heme and iron-sulfur clusters, in mediating chemistry beneficial to a protocell. Laboratory experiments and spectroscopic findings suggest plausible pathways, often facilitated by UV light, for the synthesis of heme and iron-sulfur clusters. Once formed, heme displays catalytic, peroxidase-like activity when complexed with amphiphiles. This activity could have been beneficial in two ways. First, heme could have catalytically removed a molecule (H2O2) that could have had degradative effects on a protocell. Second, heme could have helped in the synthesis of the building blocks of life by coupling the reduction of H2O2 with the oxidation of organic substrates. The necessity of amphiphiles to avoid the formation of inactive complexes of heme is telling, as the modern-day electron transport chain possesses heme embedded within a lipid membrane. Conversely, prebiotic iron-sulfur peptides have yet to be reported to partition into lipid membranes, nor have simple iron-sulfur peptides been found to be capable of participating in the synthesis of organic molecules. Instead, iron-sulfur peptides span a wide range of reduction potentials complementary to the reduction potentials of hemes. The reduction potential of iron-sulfur peptides can be tuned by the type of iron-sulfur cluster formed, e.g., [2Fe-2S] versus [4Fe-4S], or by the substitution of ligands to the metal center. Since iron-sulfur clusters easily form upon stochastic encounters between iron ions, hydrosulfide, and small organic molecules possessing a thiolate, including peptides, the likelihood of soluble iron-sulfur clusters seems to be high. What remains challenging to determine is if iron-sulfur peptides participated in early prebiotic chemistry or were recruited later when protocellular membranes evolved that were compatible with the exploitation of electron transfer for the storage of energy as a proton gradient. This problem mirrors in some ways the difficulty in deciphering the origins of metabolism as a whole. Chemistry that resembles some facets of extant metabolism must have transpired on the prebiotic Earth, but there are few clues as to how and when such chemistry was harnessed to support a (proto)cell. Ultimately, unraveling the roles of hemes and iron-sulfur clusters in prebiotic chemistry promises to deepen our understanding of the origins of life on Earth and aids the search for life elsewhere in the universe.

Highly Efficient Photoelectrochemical Alkene Epoxidation on a Dye-Sensitized Photoanode.

In photoelectrochemical (PEC) cells, selective oxidation of organic substrates coupled with hydrogen evolution represents a promising approach for value-added chemical production and solar energy conversion. In this study, we report on PEC epoxidation of alkenes at a ruthenium dye-sensitized photoanode in a CH3CN/H2O mixed solvent with LiBr as a mediator and water as the oxygen source. The dye-sensitized photoanode was found to exhibit significant advantages in the simultaneous improvement of charge separation and suppression of charge recombination. First, LiBr as a redox mediator plays a critical role in charge separation, leading to an excellent excited electron injection efficiency of 95% and a high dye regeneration efficiency of 87%. Second, the predominant charge recombination pathway on the dye-sensitized photoanode is efficiently blocked by the reaction between alkene and the in situ generated bromine oxidant. As a result, the current system achieved a remarkable photocurrent density of over 4 mA cm-2 with a record-high incident photo-to-current efficiency (IPCE) of 51% and extraordinary selectivity of up to 99% for the epoxidation of a wide range of alkenes. Meanwhile, nearly 100% Faradaic efficiency for hydrogen evolution was obtained. The performance shown here exceeds that obtained by metal oxide-based semiconductor photoanodes under comparable conditions, demonstrating the great potential of dye-sensitized photoelectrodes for organic synthesis owing to their diversity and tunability.

Harnessing ultrasound-derived hydroxyl radicals for the selective oxidation of aldehyde functions.

Ultrasonic irradiation holds potential for the selective oxidation of non-volatile organic substrates in the aqueous phase by harnessing hydroxyl radicals as chemical initiators. Here, a mechanistic description of hydroxyl radical-initiated glyoxal oxidation is constructed by gleaning insights from photolysis and radiation chemistry to explain the yields and kinetic trends for oxidation products. The mechanistic description and kinetic measurements reported herein reveal that increasing the formation rate of hydroxyl radicals by changing the ultrasound frequency increases both the rates of glyoxal consumption and the selectivity towards C2acid products over those from C-C cleavage. Glyoxal consumption also occurs more rapidly and with greater selectivity towards C2acids under acidic conditions, which favor the protonation of carboxylate intermediates into their less reactive acidic forms. Leveraging such pH and frequency effects is crucial to mitigating product degradation by secondary reactions with hydroxyl radicals and oxidation products (specifically hydrogen peroxide and superoxide). These findings demonstrate the potential of ultrasound as a driver forthe selective oxidation of aldehyde functions to carboxylic acids, offering a sustainable route for valorizing biomass-derived platform molecules.

Synthesis and Bioactive Properties of the Novel Coloured Compound Obtained via the Laccase-Mediated Transformation of 5-Aminosalicylic Acid.

Biocatalysis processes based on oxidoreductases, such as fungal laccase, are important for discovering new organic compounds with broad structures and potential applications. They include bioactive compounds, which can be obtained through laccase-mediated oxidation of organic substrates having hydroxyl and/or amino groups especially, e.g., 5-aminosalicylic acid (5-ASA) is characterised for its potential for oxidation by a fungal laccase obtained from a Cerrena unicolor strain. The biotransformation process was optimised in terms of the buffer and co-solvent concentration, buffer pH value, and laccase activity. Selected crude dyes were analysed for their bioactive properties, toxicity, and suitability for the dyeing of wool fibres. The data obtained clearly indicated that a low concentration of the reaction buffer in the pH range from 5 to 6 and in the presence of 10% acetonitrile increased the rate of substrate oxidation and the amount of the product formed. The red-brown compound obtained via laccase-mediated oxidation of 5-aminosalicylic acid showed antioxidant properties and unique antimicrobial activity against Staphylococcus aureus and Staphylococcus epidermidis strains with the MIC value of 0.125 mg/mL detected for the purest dye. In addition, it was reported to have good wool fibre dyeing properties and no irritant effect after patch tests on a selected group with increased skin sensitivity.

Reaction of (N4Py)Fe with H2O2 and the relevance of its Fe(IV)=O species during and after H2O2 disproportionation

AbstractThe catalytic disproportionation of by non‐heme Fe(II) complexes of H2O2 the ligand N4Py (1,1‐bis(pyridin‐2‐yl)‐N,N‐bis(pyridin‐2‐ylmethyl)methanamine) and the formation and reactivity of Fe(III)‐OOH and Fe(IV)=O species is studied by UV/Vis absorption, NIR luminescence, (resonance) Raman and headspace Raman spectroscopy, 1O2 trapping and DFT methods. Earlier DFT studies indicated that disproportionation of H2O2 catalysed by Fe(II)‐N4Py complexes produce only 3O2, however, only the low‐spin state pathway was considered. In the present study, DFT calculations predict two pathways for the reaction between Fe(III)‐OOH and H2O2, both of which yield 3O2/H2O2 and involve either the S=1/2 or the S=3/2 spin state, with the latter being spin forbidden. The driving force for both pathways are similar, however, a minimal energy crossing point (MECP) provides a route for the formally spin forbidden reaction. The energy gap between the reaction intermediate and the MECP is lower than the barrier across the non‐adiabatic channel. The formation of 3O2 only is confirmed experimentally in the present study through 1O2 trapping and NIR luminescence spectroscopy. However, attempts to use the 1O2 probe ( ‐terpinene) resulted in initiation of auto‐oxidation rather than formation of the expected endoperoxide, which indicated formation of OH radicals from Fe(III)‐OOH, e. g., through O−O bond homolysis together with saturation of methanol with 3O2. Microkinetic modelling of spectroscopic data using rate constants determined earlier, reveal that there is another pathway for Fe(III)‐OOH decomposition in addition to competition between the reaction of Fe(III)‐OOH with H2O2 and homolysis to form Fe(IV)=O and hydroxyl radical. Notably, after all H2O2 is consumed the decay of the Fe(III)‐OOH species is predominantly through a second order self reaction (with Fe(III)‐OOH). The conclusion reached is that the rate of O−O bond homolysis in the Fe(III)‐OOH species to form Fe(IV)=O and an hydroxyl radical is too low to be responsible for the observed oxidation of organic substrates.

Phototrophic Fe(II) oxidation by Rhodopseudomonas palustris TIE-1 in organic and Fe(II)-rich conditions.

Rhodopseudomonas palustris TIE-1 grows photoautotrophically with Fe(II) as an electron donor and photoheterotrophically with a variety of organic substrates. However, it is unclear whether R. palustris TIE-1 conducts Fe(II) oxidation in conditions where organic substrates and Fe(II) are available simultaneously. In addition, the effect of organic co-substrates on Fe(II) oxidation rates or the identity of Fe(III) minerals formed is unknown. We incubated R. palustris TIE-1 with 2 mM Fe(II), amended with 0.6 mM organic co-substrate, and in the presence/absence of CO2 . We found that in the absence of CO2 , only the organic co-substrates acetate, lactate and pyruvate, but not Fe(II), were consumed. When CO2 was present, Fe(II) and all organic substrates were consumed. Acetate, butyrate and pyruvate were consumed before Fe(II) oxidation commenced, whereas lactate and glucose were consumed at the same time as Fe(II) oxidation proceeded. Lactate, pyruvate and glucose increased the Fe(II) oxidation rate significantly (by up to threefold in the case of lactate). 57 Fe Mössbauer spectroscopy revealed that short-range ordered Fe(III) oxyhydroxides were formed under all conditions. This study demonstrates phototrophic Fe(II) oxidation proceeds even in the presence of organic compounds, and that the simultaneous oxidation of organic substrates can stimulate Fe(II) oxidation.

Harnessing fungal bio-electricity: a promising path to a cleaner environment.

Integrating fungi into fuel cell systems presents a promising opportunity to address environmental pollution while simultaneously generating energy. This review explores the innovative concept of constructing wetlands as fuel cells for pollutant degradation, offering a practical and eco-friendly solution to pollution challenges. Fungi possess unique capabilities in producing power, fuel, and electricity through metabolic processes, drawing significant interest for applications in remediation and degradation. Limited data exist on fungi's ability to generate electricity during catalytic reactions involving various enzymes, especially while remediating pollutants. Certain species, such as Trametes versicolor, Ganoderma lucidum, Galactomyces reessii, Aspergillus spp., Kluyveromyce smarxianus, and Hansenula anomala, have been reported to generate electricity at 1200 mW/m3, 207 mW/m2, 1,163 mW/m3, 438 mW/m3, 850,000 mW/m3, and 2,900 mW/m3, respectively. Despite the eco-friendly potential compared to conventional methods, fungi's role remains largely unexplored. This review delves into fungi's exceptional potential as fuel cell catalysts, serving as anodic or cathodic agents to mitigate land, air, and water pollutants while simultaneously producing fuel and power. Applications cover a wide range of tasks, and the innovative concept of wetlands designed as fuel cells for pollutant degradation is discussed. Cost-effectiveness may vary depending on specific contexts and applications. Fungal fuel cells (FFCs) offer a versatile and innovative solution to global challenges, addressing the increasing demand for alternative bioenergy production amid population growth and expanding industrial activities. The mechanistic approach of fungal enzymes via microbial combinations and electrochemical fungal systems facilitates the oxidation of organic substrates, oxygen reduction, and ion exchange membrane orchestration of essential reactions. Fungal laccase plays a crucial role in pollutant removal and monitoring environmental contaminants. Fungal consortiums show remarkable potential in fine-tuning FFC performance, impacting both power generation and pollutant degradation. Beyond energy generation, fungal cells effectively remove pollutants. Overall, FFCs present a promising avenue to address energy needs and mitigate pollutants simultaneously.

A dinuclear nickel peroxycarbonate complex: CO2 addition promotes H2O2 release.

Nickel coordination compounds featuring Ni-O bonds are key structural motifs in both bioinorganic and synthetic chemistries. They serve as precursors for organic substrate oxidation and are commonly invoked intermediates in water oxidation and oxygen reduction schemes. Herein, we disclose a series of well-defined dinuclear nickel complexes that, upon treatment with CO2 and H2O2, afford the first nickel-bound peroxycarbonate. This unprecedented nickel-oxygen intermediate is stabilized by hydrogen bonding templated across the bimetallic core. Contrasting copper and iron analogues, the nickel peroxycarbonate reversibly dissociates H2O2, a process that is shown to be accelerated by exogenous CO2.

Oxidation of Organic Substrates with Sodium Hypochlorite (A Review)

Oxidation of Organic Substrates with Sodium Hypochlorite (A Review)

Pyrogenic Black Carbon Suppresses Microbial Methane Production by Serving as a Terminal Electron Acceptor.

Methane (CH4) is the second most important greenhouse gas, 27 times as potent as CO2 and responsible for >30% of the current anthropogenic warming. Globally, more than half of CH4 is produced microbially through methanogenesis. Pyrogenic black carbon possesses a considerable electron storage capacity (ESC) and can be an electron donor or acceptor for abiotic and microbial redox transformation. Using wood-derived biochar as a model black carbon, we demonstrated that air-oxidized black carbon served as an electron acceptor to support anaerobic oxidation of organic substrates, thereby suppressing CH4 production. Black carbon-respiring bacteria were immediately active and outcompeted methanogens. Significant CH4 did not form until the bioavailable electron-accepting capacity of the biochar was exhausted. An experiment with labeled acetate (13CH3COO-) yielded 1:1 13CH4 and 12CO2 without biochar and predominantly 13CO2 with biochar, indicating that biochar enabled anaerobic acetate oxidation at the expense of methanogenesis. Methanogens were enriched following acetate fermentation but only in the absence of biochar. The electron balance shows that approximately half (∼2.4 mmol/g) of biochar's ESC was utilized by the culture, corresponding to the portion of the ESC > +0.173 V (vs SHE). These results provide a mechanistic basis for quantifying the climate impact of black carbon and developing ESC-based applications to reduce CH4 emissions from biogenic sources.

The phylogeny of Acetobacteraceae : photosynthetic traits and deranged respiratory enzymes

ABSTRACT We present here a comprehensive phylogenomic analysis of Acetobacteraceae , a vast group of alphaproteobacteria that has been widely studied for their economic importance. Our results indicate that the ancestor of Acetobacteraceae most likely was photosynthetic and evolved via a progressive transition from versatile photoferrotrophy to the incomplete oxidation of organic substrates defining acetous physiology. Vestigial signs of photosynthetic carotenoid metabolism are present in non-photosynthetic acetous taxa that have lost cytochrome oxidase, while their sister taxa retain such traits. The dominant terminal oxidase of acetous bacteria, the bo 3 ubiquinol oxidase, is derived from duplication and diversification of operons present in Acidocella taxa that have lost photosynthesis. We analyzed the bioenergetic traits that can compensate for the electron transfer function of photosynthetic reaction centers or constitute alternative pathways for the oxidoreduction of c -type cytochromes, such as iron oxidation. The latter pathway bypasses the deranged cytochrome bc 1 complex that is characteristically present in acidophilic taxa due to the loss of conserved ligands in both the Rieske iron-sulfur protein and cytochrome b subunit. The deranged or non-functional bc 1 complex may be retained for its structural role in stabilizing Complex I. The combination of our phylogenetic analysis with in-depth functional evaluations indicates that the order Acetobacterales needs to be emended to include three families: Acetobacteraceae sensu stricto , Roseomonadaceae fam. nov., and Acidocellaceae fam. nov. IMPORTANCE Acetobacteraceae are one of the best known and most extensively studied groups of bacteria, which nowadays encompasses a variety of taxa that are very different from the vinegar-producing species defining the family. Our paper presents the most detailed phylogeny of all current taxa classified as Acetobacteraceae , for which we propose a taxonomic revision. Several of such taxa inhabit some of the most extreme environments on the planet, from the deserts of Antarctica to the Sinai desert, as well as acidic niches in volcanic sites like the one we have been studying in Patagonia. Our work documents the progressive variation of the respiratory chain in early branching Acetobacteraceae into the different respiratory chains of acidophilic taxa such as Acidocella and acetous taxa such as Acetobacter . Remarkably, several genomes retain remnants of ancestral photosynthetic traits and functional bc 1 complexes. Thus, we propose that the common ancestor of Acetobacteraceae was photosynthetic.

Covalent Association of a Ruthenium‐Based Chromophore and a Copper Catalyst: A Synergy for Sulfides Photo‐oxidation

AbstractThe development of catalytic systems for the oxidation of organic substrates using renewable sources such as water and dioxygen remains challenging. In this paper we report the synthesis and full characterization of a new dyad combining a ruthenium(II)‐based chromophore and a bio‐inspired copper(II) pre‐catalyst. In particular, photo‐induced electron transfer from the photosensitized RuII subunit toward the CuII center is highlighted. The photogenerated CuI moiety proves to be catalytically efficient for sulfides oxidation by 3O2 in the presence of a sacrificial electron source. Finally, the covalent association of the two partners favors Cu/O2‐based catalysis at the expense of a 1O2‐centered reactivity for a bimolecular mixture.

Bioinspired Non-Heme Mn Catalysts for Regio- and Stereoselective Oxyfunctionalizations with H2 O2.

In recent years, metalloenzymes-mediated highly selective oxidations of organic substrates under mild conditions have been inspiration for developing synthetic bioinspired catalyst systems, capable of conducting such processes in the laboratory (and, in the future, in industry), relying on easy-to-handle and environmentally benign oxidants such as H2 O2 . To date, non-heme manganese complexes with chiral bis-amino-bis-pyridylmethyl and structurally related ligands are considered as possessing the highest synthetic potential, having demonstrated the ability to mediate a variety of chemo- and stereoselective oxidative transformations, such as epoxidations, C(sp3 )-H hydroxylations and ketonizations, oxidative desymmetrizations, kinetic resolutions, etc. Furthermore, in the past few years non-heme Mn based catalysts have become the major platform for studies focused on getting insight into the molecular mechanisms of oxidant activation and (stereo)selective oxygen transfer, testing non-traditional hydroperoxide oxidants, engineering catalytic sites with enzyme-like substrate recognition-based selectivity, exploration of catalytic regioselectivity trends in the oxidation of biologically active substrates of natural origin. This contribution summarizes the progress in manganese catalyzed C-H oxygenative transformations of organic substrates, achieved essentially in the past 5 years (late 2018-2023).

Electrochemical investigations of the multicopper oxidase from Aquifex aeolicus under direct electron transfer with carbon electrodes

The study of redox proteins confined over an electrode surface is a powerful approach enabling precise modulation of the driving force for interfacial electron transfer through the control of the electrode potential. In this work, we present the investigation of a protein variant of the multicopper oxidase from Aquifex aeolicus obtained by directed evolution. Motivated by the enhanced performance of the protein variant for the oxidation of organic compounds in solution, the enzyme is studied under direct electron transfer with the electrode. A marked dependence of the redox potential with the pH of the electrolyte solution is observed, which is further confirmed by studies under non-turnover conditions. Further investigations show the need for an initial reductive activation to attain maximum bioelectrocatalytic activity for O2 reduction, in agreement with similar observations made for other multicopper oxidases (MCOs). Moreover, the influence of chloride ions on the bioelectrocatalytic reaction is described. The O2-reduction activity is barely affected at KCl concentrations as high as 100 mM. However, a shift in the O2-reduction potential towards more negative values is observed at low pH, explaining the apparent loss in activity for the oxidation of organic substrates in the presence of KCl. The obtained results contribute to a more detailed understanding of the electrochemical properties of metallo-oxidases and other MCOs.

Why non-heme Mn complexes of amino 2-quinolylmethyl ligands are inactive in oxidation catalysis? An insight from X-ray data

In the last decade, manganese complexes with bis-amino-bis-pyridylmethyl and structurally related N4 donor ligands have emerged as efficient catalysts of selective epoxidations and C–H oxidations of organic substrates with H2O2. Although a plethora of various ligand structures have been designed, (quinolin-2-yl)methyl moieties have not been involved in constructing such catalysts. Herewith we report crystal structures of several Mn complexes with (quinolin-2-yl)methyl and discuss possible reasons of their inactivity in oxidation catalysis.

Periodate-Mediated Aerobic Oxidation of Sulfides over a Bifunctional Porphyrin-polyoxometalate Catalyst: Photosensitized Singlet Oxygen Oxidation of Iodate to Periodate.

Regeneration of terminal oxidants by molecular oxygen in metal-catalyzed oxidations of organic substrates has the advantage of avoiding the use of stoichiometric amounts of hazardous and/or expensive reagents to meet (some of) the green chemistry requirements. In the present study, photosensitized singlet oxygen oxidation of iodate to periodate has been used to regenerate the oxidant in polyoxometalate (POM)-catalyzed oxidation of sulfides to sulfoxides with periodate in water. To the best of our knowledge, it is the first report on singlet oxygen oxidation of iodate to periodate. In order to determine the contribution of photooxidation and oxidation pathways in the formation of sulfoxide, the oxidation of diphenyl sulfide with a very low reactivity toward aerobic photooxidation was studied; a sevenfold increase in the conversion of the sulfide to the diphenyl sulfoxide was observed for the reaction conducted in the presence of H2TMPyP-PW12O40/IO3-/O2/hν compared to that in the presence of H2TMPyP-PW12O40/O2/hν. Also, under the same conditions, a ca. 1.5-fold increase was observed in the case of methyl phenyl sulfide, which shows high reactivity toward both the oxidation and photooxidation reactions. A porphyrin-POM nanocomposite formed by the electrostatic immobilization of meso-tetra(N-methylpyridinium-4-yl)porphyrin (H2TMPyP) on PW12O40 was employed for the one-pot oxidation and photooxidation reactions. Field-emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), diffuse-reflectance UV-vis spectroscopy, thermal gravimetric analysis, and Fourier transform infrared were used to characterize the formation of the hybrid compound. An average particle size of 42 nm was estimated for H2TMPyP-PW12O40 from XRD peak broadening using the Scherrer equation. Also, FESEM images showed the formation of nearly spherical nanoparticles with a size of ca. 200 nm. The redshift of the Soret band of H2TMPyP upon immobilization on POM was attributed to strong N-H···O hydrogen-bond interactions between POM and porphyrin.

Ligand-Copper(I) Primary O2-Adducts: Design, Characterization, and Biological Significance of Cupric-Superoxides.

In this Account, we overview and highlight synthetic bioinorganic chemistry focused on initial adducts formed from the reaction of reduced ligand-copper(I) coordination complexes with molecular oxygen, reactions that produce ligand-CuII(O2•-) complexes (O2•- ≡ superoxide anion). We provide mostly a historical perspective, starting in the Karlin research group in the 1980s, emphasizing the ligand design and ligand effects, structure, and spectroscopy of these O2 adducts and subsequent further reactivity with substrates, including the interaction with a second ligand-CuI complex to form binuclear species. The Account emphasizes the approach, evolution, and results obtained in the Karlin group, a synthetic bioinorganic research program inspired by the state of knowledge and insights obtained on enzymes possessing copper ion active sites which process molecular oxygen. These constitute an important biochemistry for all levels/types of organisms, bacteria, fungi, insects, and mammals, including humans.Copper is earth abundant, and its redox properties in complexes allow for facile CuII/CuI interconversions. Simple salts or coordination complexes have been well known to serve as oxidants for the stoichiometric or catalytic oxidation or oxygenation (i.e., O-atom insertion) of organic substrates. Thus, copper dioxygen- or peroxide-centered synthetic bioinorganic studies provide strong relevance and potential application to synthesis or even the development of cathodic catalysts for dioxygen reduction to hydrogen peroxide or water, as in fuel cells. The Karlin group's focus however was primarily oriented toward bioinorganic chemistry with the goal to provide fundamental insights into the nature of copper-dioxygen adducts and further reduced and/or protonated derivatives, species likely occurring in enzyme turnover or related in one or more aspects of formation, structure, spectroscopic properties, and scope of reactivity toward organic/biochemical substrates.Prior to this time, the 1980s, O2 adducts of redox-active first-row transition-metal ions focused on iron, such as the porphyrinate-Fe centers occurring in the oxygen carrier proteins myoglobin and hemoglobin and that determined to occur in cytochrome P-450 monooxygenase turnover. Deoxy (i.e., reduced Fe(II)) heme proteins react with O2, giving FeIII-superoxo complexes (preferably referred to by traditional biochemists as ferrous-oxy species). And, it was in the 1970s that great strides were made by synthetic chemists in generating hemes capable of forming O2 adducts, their physiochemical characterization providing critical insights to enzyme (bio)chemistry and providing ideas and important goals leading to countless person years of future research.

Heterogeneous-Driven Glutathione Oxidation: Defining the Catalytic Role of Chalcopyrite Nanoparticles.

Transition-metal nanocatalysis represents a novel alternative currently experiencing flourishing progress to tackle the tumor microenvironment (TME) in cancer therapy. These nanomaterials aim at attacking tumor cells using the intrinsic selectivity of inorganic catalysts. In addition, special attention to tune and control the release of these transition metals is also required. Understanding the chemical reactions behind the catalytic action of the transition-metal nanocatalysts and preventing potential undesired side reactions caused by acute cytotoxicity of the released ionic species represent another important field of research. Specifically, copper-based oxides may suffer from acute leaching that potentially may induce toxicity not only to target cancer cells but also to nearby cells and tissues. In this work, we propose the synthesis of chalcopyrite (CuFeS2) nanostructures capable of triggering two key reactions for an effective chemodynamic therapy (CDT) in the heterogeneous phase: (i) glutathione (GSH) oxidation and (ii) oxidation of organic substrates using H2O2, with negligible leaching of metals under TME-like conditions. This represents an appealing alternative toward the development of safer copper-iron-based nanocatalytic materials with an active catalytic response without incurring leaching side phenomena.