Organic Electronic Materials Research Articles

Tuning direct-written terahertz metadevices with organic mixed ion-electron conductors

In the past decade, organic mixed ion-electron conductors have been successfully adopted in innovative bioelectronic, neuromorphic, and electro-optical technologies, as well as in multiple energy harvesting and printed electronics applications. However, despite the intense research efforts devoted to these materials, organic mixed conductors have not yet found application in electronic/photonic devices operating in key regions of the electromagnetic spectrum, such as the microwave (>5 GHz) and terahertz (0.1-10 THz) ranges. A possible reason for this technological gap is the widespread notion that organic electronic materials are unsuitable for high-frequency applications. In this work, we demonstrate for the first time the utility of high-performance polymer mixed conductors as electro-active tuning layers in reconfigurable terahertz metasurfaces, achieving modulation performances comparable with state-of-the-art inorganic and 2D semiconductors. Through time-domain terahertz spectroscopy, we show that the large conductivity modulations of these polymers, until now probed only at very low frequencies, are effectively preserved in the terahertz range, leading to optimal metadevice reconfigurability. Finally, we leverage the unique processability of organic materials to develop fully direct-written electrically tuneable metasurfaces onto both rigid and flexible substrates, opening new opportunities for the mass-scale realization of flexible and light-weight terahertz optics with unique mechanical characteristics and environmental footprint.

Photoinduced On and Off Polymeric Room Temperature Phosphorescence Based On Polycyclic Aromatic Hydrocarbon Isomers.

As family members of polycyclic aromatic hydrocarbons, compound anthracene (Ant) and phenanthrene (Phe) as isomers are widely used in organic optical materials and electronic materials. But their photochemical and physical properties are very different. In this work, the room temperature phosphorescence (RTP) properties of PVA-B-Ant and PVA-B-Phe are discussed carefully which are prepared by B-O click reaction through polyvinyl alcohol (PVA) with 9-anthraceneboronic acid (B-Ant) and 9-phenanthrenylboronic acid (B-Phe), respectively. PVA-B-Phe 1 % film exhibits excellent fluorescence (FL) emission at 374 nm and RTP emission at 523 nm with green afterglow and around 1.9 s phosphorescence lifetime. However, PVA-B-Ant 1 % film only shows strong blue FL emission at 414 nm, and the emission intensity decreases seriously with the extension of irradiation time. Experimental and theoretical calculations results suggest that the photodimer of Ant which is formed in PVA matrix under the UV light irradiation would be competitive with the process of RTP emission. This work demonstrates that the RTP properties of organic molecules might be probably affected by the photostability of the organic phosphor under UV irradiation.

N-doped and Bowl-Shaped Azabenzo[3,4]azulenofluorene: Synthesis and Characterization of Bridged Aza-Triarylamines.

Triarylamines are frequently employed as electron donor functional groups in a variety of organic electronic materials. We herein report the synthesis and in-depth characterisation of aza-analogues of fully bridged triarylamines, consisting of 5-, 6- and 7-membered rings. The impact of nitrogen doping and π-extension on the structural, electronic and optical-properties of these contorted heteroaromatic PAHs is thoroughly investigated and paves the way for an improved understanding of the structure-property relationships.

Synthesis of core-functionalised naphthalene diimides from naphthalenetetracarboxylic dianhydride using a vibratory ball mill: bromination, imidization and Heck-type reactions.

The synthesis of 9 core-functionalised naphthalene diimide (c-NDI) residues is reported via a 3-step solvent free synthesis from naphthalenetetracarboxylic dianhydride using only mechanochemical activation. Selective dibromination and subsequent dimidiation were achieved for the first time in a vibratory ball mill, resulting in the key structural intermediate, 2,6-dibromonaphthalenediimide (DBND), which is the basis for elaboration into a multitude of organic electronic materials. Our new synthesis of DBND is achieved in just 5 hours' reaction time over two steps compared to typical solution state times of 24 hours. Subsequent Heck-type cross coupling reactions, with a range of styrene residues, produced a series of c-NDIs in good yields. The Heck-type reactions are rapid (1.5 hours), require no additional heating or solvent and are tolerant of atmospheric moisture and air.

Unusual Cross-Conjugation in Cyclic Dipeptide-Based Building Blocks for Donor-Acceptor Semiconducting Conjugated Polymers.

Cross conjugation, though prevalent in many organic compounds, is typically considered less effective for electron delocalization compared to linear conjugation. Consequently, it is rarely used as the backbone structure for semiconducting conjugated polymers. In this study, we designed and synthesized a novel building block, TIDP, which features a central cyclic dipeptide with cross conjugation characteristics. Strong intramolecular hydrogen bonding interactions confer TIDP with a highly rigid and coplanar conformation. Importantly, theoretical calculations reveal that π electrons are well delocalized across the entire structure, despite its low aromaticity. Conjugated polymers incorporating TIDP exhibit high charge carrier mobilities, demonstrating the effective π electrons delocalization of this innovative building block. Our findings show that with rational design, cross conjugation can achieve effective π electrons delocalization, providing a valuable approach for developing high-performance conjugated polymers for organic electronic materials.

Unusual Cross‐Conjugation in Cyclic Dipeptide‐Based Building Blocks for Donor–Acceptor Semiconducting Conjugated Polymers

AbstractCross conjugation, though prevalent in many organic compounds, is typically considered less effective for electron delocalization compared to linear conjugation. Consequently, it is rarely used as the backbone structure for semiconducting conjugated polymers. In this study, we designed and synthesized a novel building block, TIDP, which features a central cyclic dipeptide with cross conjugation characteristics. Strong intramolecular hydrogen bonding interactions confer TIDP with a highly rigid and coplanar conformation. Importantly, theoretical calculations reveal that π electrons are well delocalized across the entire structure, despite its low aromaticity. Conjugated polymers incorporating TIDP exhibit high charge carrier mobilities, demonstrating the effective π electrons delocalization of this innovative building block. Our findings show that with rational design, cross conjugation can achieve effective π electrons delocalization, providing a valuable approach for developing high‐performance conjugated polymers for organic electronic materials.

Controlling Polarization‐Induced Polaron Accumulation in OLEDs via Device Design

AbstractSpontaneous alignment of molecular electric dipole moments, known as spontaneous orientation polarization (SOP), is present in many organic electronic materials. The SOP‐induced field changes the internal voltage distribution within the device, altering polaron injection and accumulation. The important role of SOP in organic light‐emitting devices (OLEDs) has recently been emphasized with clear links between dipole alignment and device efficiency and operational lifetime. Prior work has thus sought to engineer SOP via changes in thin film composition or processing conditions. These efforts have generally been directed at the OLED electron transport layer, which can show strong SOP. This work takes a different approach, focusing instead on how changes in device architecture can be applied to tune the magnitude and dynamics of polaron accumulation in response to SOP. In this work, it is demonstrated that the introduction of SOP into the device emissive layer offers control over the spatial location of accumulation. In parallel, insertion of a spacer layer between the hole transport and emissive layers can be used to tune the polaron accumulation rate and density during device operation. Both of these architectural changes permit an increase in OLED efficiency and a pathway around the deleterious impact of SOP‐induced polaron accumulation.

Suzuki-Miyaura coupling reaction: Blue-yellow emitting AIE active dyes for organic electronics

A series of eight novel donor‒acceptor (D─A) based 2,3-di(thiophen-2-yl)quinoxaline derivatives 2–9 were prepared by modulating donor species on quinoxaline core with Palladium catalyzed Suzuki–Miyaura ‘C–C bond’ coupling reaction. The synthesized molecules were fully characterized and studied for impact of D–A interaction on opto-electrochemical properties. Absorption spectra of 2–9 display intramolecular charge transfer (ICT) transitions in the range of 388–414 nm. Dyes shows positive solvatochromism and emit in blue‒yellow region with emission maxima 444−550 nm on excitation at their respective ICT maxima in toluene, chloroform, DCM, DMSO and neat solid film. Further, solid state emission was studied for aggregation‒induced emission (AIE) effect in THF–water system due to the nanoparticles formation, as confirmed by FEG‒SEM technique. The HOMO and LUMO energy level for compounds 2–9 were measured by cyclic voltammetry and found in the range of −5.15 to −5.94 eV and −2.81 to −3.39 eV. Theoretical studies of molecules were also carried out by using DFT and TD‒DFT calculations. The comparable HOMO and LUMO energy levels with reported ambipolar materials and efficient solid-state emission make synthesized compounds potential candidate for solid state emissive, ambipolar charge transporting materials in organic electronics.

The influence of the axial group on the crystal structures of boron subphthalocyanines.

The crystal structures of 16 boron subphthalocyanines (BsubPcs) with structurally diverse axial groups were analyzed and compared to elucidate the impact of the axial group on the intermolecular π-π interactions, axial-group interactions, axial bond length and BsubPc bowl depth. π-π interactions between the isoindole units of adjacent BsubPc molecules most often involve concave-concave packing, whereas axial-group interactions with adjacent BsubPc molecules tend to favour the convex side of the BsubPc bowl. Furthermore, axial groups that contain O and/or F atoms tend to have significant hydrogen-bonding interactions, while axial groups containing arene site(s) can participate in π-π interactions with the BsubPc bowl, both of which can strongly influence the crystal packing. Bulky axial groups did tend to disrupt the π-π interactions and/or axial-group interactions, preventing some of the close packing that is seen in BsubPcs with less bulky axial groups. The atomic radius of the heteroatom bonded to boron directly influences the axial bond length, whereas the axial group has minimal impact on the BsubPc bowl depth. Finally, the crystal growth method did not generally appear to have a significant impact on the solid-state arrangement, with the exception of water occasionally being incorporated into crystal structures when hygroscopic solvents were used. These insights can help with the design and fine-tuning of the solid-state structures of BsubPcs as they continue to be developed as functional materials in organic electronics.

Progress on the Development of Boron Subphthalocyanines (BsubPcs) and Subnaphthalocyanines (BsubNcs) Including Hybrids and Their Sustainability

Our group focuses on molecular design, synthetic methods and in-depth characterization of boron subphthalocyanines (BsubPcs) and subnaphthalocyanines (BsubNcs)[1] to apply them to organic electronics.[2] BsubPcs, BsubNcs and their hybrids called Bsub(Pc3-p-Ncp) are macrocycles with central boron atom and are p-conjugated macrocycles. Our focal point balances between the basic and applied chemistry, chemical engineering and their in-depth physical properties (electrochemistry included). Once materials are developed, we merge them into organic electronics for application into organic light emitting diodes (OLEDs) and organic photovoltaics (OPVs)/organic solar cells (OSCs).For this presentation, all points above will be factored in and I will focus on our progress on the development of hybrids, and mixed alloys and none mixed alloys of BsubNcs,.Regarding hybrids, they are a mixture of BsubPcs and BsubNcs, we named as X-RnBsub(Pc3-p-Ncp) – ‘p’ being the numbers of the substitutions; they were formed via reaction of BCl3 and a statistical distribution of phthalonitrile and 2,3-dicyanonaphthalene; X the axial substituent, Rn the number of peripheral substitutions, Pcp the number of 6 p-conjugated bonds, Ncp the number of 10 p-conjugated bonds (Figure).[3] We found that X-RnBsub(Pc1-Nc2) have low photostability, therefore, we developed a ‘statistical’ synthetic methodology to target X-RnBsub(Pc2-Nc1)s, and therefore could be purified to enable physical characterization. Their absorption spectra are as wide if BsubPc+BsubNc was mixed together, therefore, has potential to harvest a larger scope of photons for OPVs or to achieved FRET transfer from a host to emit via OLED. We also confirmed their electrochemical oxidation and reduction stability and their photoluminescence.More recently, we developed a new methodology called ‘steric hinderance’ to have even a higher yield of the X-RnBsub(Pc3-p-Ncp) hybrids, and the achievement was also based on computational modelling. I will also outline this approach.In the past as we have shown that BsubNcs end up being a mixed alloyed composition with random bay-position halogenation that is formed during the reaction of BCl3 with 2,3-dicyanonaphthalene at temperature.[4] The random bay-position halogenation has been shown to be impactful in a positive way within OPV devices, negative within OLED devices and also has electrochemical variations. Ongoing, given it is random halogenation, and some of the positive outcomes, this justifies considering additional mixed alloyed compositions.We have recently been able to develop a separation method for the mixed alloyed BsubNc compositions and acquired data to show the impact of the percentage/number of bay-position halogens, chlorine and bromine included, on the electrochemical potentials and the photoluminescence.[5] We have also applied a computational model to look at the relative impact of the random bay-position halogenation on the electronics.[6] We have found that the frequency of halogenation has a larger impact on the predicted HOMO/LUMO energy levels than does the random halogen positioning around the bay-positions of the BsubNcs. As this computational data is therefore comparable to the acquired electrochemical data.I will also present a new synthetic methodology to avoid the random bay-position halogenation of the associated BsubNcs. We also have recently within these semesters developed alternative chemistry to more tune the mixed alloys of the BsubNcs. This will also be a part of the presentation.We have also recently developed an AI-ML method to further accelerate the BsubNc development. The focal point of this approach was to have bay-position substitutions to then not have any random bay-position halogenation of the BsubNcs. So, these current and upcoming outcomes will also be a part of the presentations.For this presentation, I will also be outlining the sustainability of these great macrocyclic compounds. Claessens, C. G.; et al, Subphthalocyanines, Subporphyrazines, and Subporphyrins: Singular Nonplanar Aromatic Systems. Chem. Rev. 2014, 114 (4), 2192-2277.Morse, G. E.; et al, Boron Subphthalocyanines as Organic Electronic Materials. ACS Appl. Mater. & Interfaces 2012, 4 (10), 5055-5068.Farac, N.F.; et al, Cs-Symmetric, Peripherally Fluorinated Boron Subphthalocyanine–Subnaphthalocyanine Hybrids: Shedding New Light on Their Fundamental Photophysical Properties and Their Functionality as Optoelectronic Materials. J. Phys. Chem. C 2023, 127 (1), 702–727.Dang, J. D.; et al, The mixed alloyed chemical composition of chloro-(chloro)n-boron subnaphthalocyanines dictates their physical properties and performance in organic photovoltaic devices. J Mater. Chem. A 2016, 4 (24), 9566-9577.Holst, D.P.; et al, Enhanced analytical and physical characterization of mixtures of random bay-position chlorinated boron subnaphthalocyanines enabled by an established partial separation method (a part 2). New J. Chem. 2021, 45, 21082-21091.Holst, D.P.; et al, Updated Calibrated Model for the Prediction of Molecular Frontier Orbital Energies and Its Application to Boron Subphthalocyanines. J. Chem. Inf. Model. 2022, 62 (4), 829–840. Figure 1

Engineering Thin Films of Silicon Phthalocyanines for Organic Thin Film Transistors

Metal phthalocyanines (MPc) show great promise as semiconductors due to their exceptional optoelectronic properties, high thermal and photochemical stability, and ability to be easily synthesized and functionalized for specific applications. The metal/metalloid ion in the center of the MPc ring can significantly influence the electronic, optical, and magnetic properties of the compound, as well as its solubility and stability. The majority of MPc, such as copper phthalocyanine (CuPc) are used as hole-transport materials (p-type) in organic electronics. Silicon phthalocyanines (R2-SiPc) are emerging semiconductors which predominantly moves electrons and have led to high performance n-type organic thin-film transistors (OTFTs). Their low synthetic complexity paired with their versatile axial group facilitates the finetuning of their chemical properties, solution properties and processing characteristics without significantly affecting their frontier orbital levels or their absorption properties. The crystal engineering and film forming characteristics of R2-SiPc semiconductors can be tuned through appropriate axial group functionalization, therefore facilitating their integration into both OTFTs and OPVs by solution processing or vapor deposition.Our group has developed families of R2-SiPc and integrated them into OTFTs with an emphasis on thin film processing and engineering of the interfaces for improved device performance. We have established structure property relationships of the final device performance as a function of 1) R2-SiPc axial groups and peripheral groups, 2) surface chemistry and composition and 3) thin film deposition conditions. I will also be discussing our recent work using advanced film characterization such as polarized Raman microscopy and synchrotron based scanning transmission x-ray microscopy to evaluate the resulting films and optimize the OTFT performance. Figure 1

(Invited) Doping at the Extreme in Organic Semiconductors: Challenges and Opportunities

Molecular doping is an effective tool to enhance bulk conductivity, increase carrier injection and de-activate electron or hole traps in organic molecular and polymer semiconductors. Considerable effort has been directed toward the synthesis of powerful and stable p-type and n-type molecular dopants over the past decade.[1,2] This talk reviews a range of molecular redox agents used in organic electronics, with focus on strong reductants and oxidants for organic semiconductors with low electron affinity (EA) and large ionization energy (IE), respectively. In particular, we look at air-stable dimers, e.g. [RuCp*Mes]2, formed of 19-electron organometallic sandwich compounds able to reduce organic semiconductors with EA well below 3 eV.[3] We review powerful single-electron molecular oxidants, e.g. F6-TCNNQ and CN6-CP, which can introduce holes in organic semiconductors with IE larger than 5.6 eV. Applications of these n- and p-dopants to improve the conductivity of carrier injection layers and create large gap semiconductor p-i-n structures are described.[4] The last part of the talk focuses on recent work on adduct-based p-doping of organic semiconductors, applicable to a range of hole transport materials.[5][1]S. Barlow, S.R. Marder, X. Lin, F. Zhang and A. Kahn, Electrical Doping of Organic Semiconductors with Molecular Oxidants and Reductants, Handbook of Conducting Polymers (2019)[2] G. Song, S.B. Kim,S. Mohapatra, Y. Qi, T. Sajoto, A. Kahn, S.R. Marder, S. Barlow, n-Doping of Organic Electronic Materials Using Air-Stable Organometallics, Adv. Mat. 24, 699 (2012)[3] X. Lin, B. Wegner, K. M. Lee, M. A. Fusella, F. Zhang, K. Moudgil, B. P. Rand, S. Barlow, S. R. Marder, N. Kochand A. Kahn, Beating the Thermodynamic Limit: Photo-Activation of n-Doping in Organic Semiconductors, Nature Materials 16, 1209 (2017)[4] H. L. Smith, J. T. Dull, S. Mohapatra, S. Barlow, S. Marder, B. P. Rand, and A. Kahn, Powerful organic molecular oxidant and reductant enable a large gap, blue light-emitting organic homojunction diode, ACS Appl. Mat. Int. 14, 2381 (2022)[5] N. Sakai, R. Warren, F. Zhang, S. Nayak, S. V. Kesava, Y.-H. Lin, H. S. Biswal, X. Lin, A. Kahn, M. Riede, P. K. Nayak and H. J. Snaith, Adduct-based p-doping of Organic Semiconductors, Nature Materials, 20, 1248 (2021)

Avoiding Photocyclized Degradation of Electrochromic Materials Based on Quantum Chemical Molecular Design.

Suppressing the photodegradation of organic electronic materials is crucial for their device applications. This study proposes a method to mitigate the photodegradation. With focus on the molecular design of triphenylamine derivatives commonly used in organic electronics, it was demonstrated that spin distributions of the derivatives would be a good quantum descriptor for predicting the photocyclization resistance to not give carbazole derivatives.

Direct Laser Writing Crystal Polymorphs of Organic Semiconductors for Phase Change Electronics.

The many diverse polymorphic behaviors observed in organic electronic materials offer opportunities to modulate electronic properties through reversibly switching crystal structures. Here, we access the prolific polymorphism observed in two-dimensional quinoidal terthiophene via laser writing to locally heat and direct the phase transitions. We access a metastable polymorph IV through rapid cooling and observe distinct symmetry as well as packing through grazing incidence X-ray diffraction (GIXD). Using our open-source PolyChemPrint patterning platform, we direct laser heating to initiate the IV-I transition, switching the conductance by >2 orders of magnitude. This is confirmed via a combination of GIXD and Raman spectroscopy. Finally, we demonstrate switching of transistor devices as well as discrete tuning of conductance via laser writing.

Design of organic electronic materials with lower exciton binding energy: machine learning analysis and high-throughput screening

Design of organic electronic materials with lower exciton binding energy: machine learning analysis and high-throughput screening

PEDOT:PSS deposition in OECTs: Inkjet printing, aerosol jet printing and spin coating

As the world moves towards integrating new functionalities into everyday objects, the demand for diverse substrates grows, making additive manufacturing an invaluable tool. Organic electronic materials have played a major role in this transition thanks to their excellent electronic and mechanical properties, adaptability and solution processability.The aim of this study is to compare spin coating, inkjet printing (IJP), and aerosol jet printing (AJP) for applying poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) as the channel material in organic electrochemical transistors (OECTs). This work investigates the often-overlooked impact of deposition techniques on the electrical performance of OECTs. Spin coating has been analysed as a reference technique, while AJP and IJP are addressed as promising pathways towards fully printed OECTs.The normalized transconductance and Ion/Ioff ratio have been analysed as figures of merit for this study. AJP devices have shown the best performance, displaying a normalized transconductance of 885 S∙nm and an Ion/Ioff ratio around 103. The spin coated OECTs showed a slightly lower normalized transconductance (740 S∙nm) and much lower Ion/Ioff ratio in the order of 101. Last, IJP exhibited a transconductance of 433 S∙nm and a Ion/Ioff ratio in the order of 102.This work could be beneficial for a wide range of applications, adding an additional degree of freedom to the tunability of the OECT channel properties. It also opens the discussion for more comprehensive studies on the films from a materials perspective.

The chemistry of heterocycles in the 21st century

The chemistry of heterocyclic compounds has traditionally been and remains a bright area of chemical science in Russia. This is due to the fact that many heterocycles find the widest application. These compounds are the key structural fragments of most drugs, plant protection agents. Many natural compounds are also derivatives of heterocycles. At present, more than half of the hundreds of millions of known chemical compounds are heterocycles. This collective review is devoted to the achievements of Russian chemists in this field over the last 15–20 years. The review presents the achievements of leading heterocyclists representing both RAS institutes and university science. It is worth noting the wide scope of the review, both in terms of the geography of author teams, covering the whole of our large country, and in terms of the diversity of research areas. Practically all major types of heterocycles are represented in the review. The special attention is focused on the practical applications of heterocycles in the design of new drugs and biologically active compounds, high-energy molecules, materials for organic electronics and photovoltaics, new ligands for coordination chemistry, and many other rapidly developing areas. These practical advances would not be possible without the development of new fundamental transformations in heterocyclic chemistry.<br> Bibliography — 2237 references.

Water-Soluble Reversible Photo-Cross-Linking Polymer Dielectrics.

Effective recycling of mixed materials requires the separation of the different components without the need for toxic solvents. One approach involves utilizing a water-soluble coating with reversible photo-cross-linkers, making it robust until end of life where it can then be dissolved in water after de-cross-linking. Here, a novel coumarin methacrylate monomer and its nitroxide-mediated copolymerization to create poly((methacrylic acid)-co-(styrene sulfonate)-co-(coumarin methacrylate)) for water-soluble thin films are reported. Under exposure to light, the coumarin functional groups produce reversible [2+2] cycloadditions which cross-link the resulting polymer films, making them no longer water soluble. Characterization of reversible cross-linking behavior is reported through changes in contact angle and in situ rheological characterization. The resulting polymers are successfully integrated into metal-insulator-metal capacitors, demonstrating the potential use for water-soluble reversible photo-cross-linkable dielectric materials for organic electronics.

π‐Conjugated Nanohoops: A New Generation of Curved Materials for Organic Electronics

AbstractNanohoops, cyclic association of π‐conjugated systems to form a hoop‐shaped molecule, have been widely developed in the last 15 years. Beyond the synthetic challenge, the strong interest towards these molecules arises from their radially oriented π‐orbitals, which provide singular properties to these fascinating structures. Thanks to their particular cylindrical arrangement, this new generation of curved molecules have been already used in many applications such as host–guest complexation, biosensing, bioimaging, solid‐state emission and catalysis. However, their potential in organic electronics has only started to be explored. From the first incorporation as an emitter in a fluorescent organic light emitting diode (OLED), to the recent first incorporation as a host in phosphorescent OLEDs or as charge transporter in organic field‐effect transistors and in organic photovoltaics, this field has shown important breakthroughs in recent years. These findings have revealed that curved materials can play a key role in the future and can even be more efficient than their linear counterparts. This can have important repercussions for the future of electronics. Time has now come to overview the different nanohoops used to date in electronic devices in order to stimulate the future molecular designs of functional materials based on these macrocycles.

π-Conjugated Nanohoops: A New Generation of Curved Materials for Organic Electronics.

Nanohoops, cyclic association of π-conjugated systems to form a hoop-shaped molecule, have been widely developed in the last 15 years. Beyond the synthetic challenge, the strong interest towards these molecules arises from their radially oriented π-orbitals, which provide singular properties to these fascinating structures. Thanks to their particular cylindrical arrangement, this new generation of curved molecules have been already used in many applications such as host-guest complexation, biosensing, bioimaging, solid-state emission and catalysis. However, their potential in organic electronics has only started to be explored. From the first incorporation as an emitter in a fluorescent organic light emitting diode (OLED), to the recent first incorporation as a host in phosphorescent OLEDs or as charge transporter in organic field-effect transistors and in organic photovoltaics, this field has shown important breakthroughs in recent years. These findings have revealed that curved materials can play a key role in the future and can even be more efficient than their linear counterparts. This can have important repercussions for the future of electronics. Time has now come to overview the different nanohoops used to date in electronic devices in order to stimulate the future molecular designs of functional materials based on these macrocycles.