Organic Dyes Research Articles

Sago-shaped embedded nanolayers of WO3/NiO/gC3N4 nanohybrids for natural degradation of environmental pollutants: A photocatalytic sunlight mediated approach

In recent years the applicability of semiconductor nanomaterials is almost in every field of science and technology. In the current study, hybrid nanomaterials containing tungsten trioxide (WO3) and nickel oxide (NiO) supported on graphitic carbon nitride (gC3N4) were prepared by a simple hydrothermal technique. Synthesis was sequential requiring the individual preparation of gC3N4 and WO3 as preliminary. The desired composition of gC3N4, WO3, nickel nitrate, and a base was transferred to an autoclave and maintained at 180°C for 18h. The resulting inorganic/organic hybrid was filtered, washed, dried, and named as inorganic/organic hybrid nanocomposite (HNC). Various compositions of HNC were prepared and characterized by Fourier transform infrared spectrometer (FT-IR), Ultra Violet-Visible Diffuse reflectance spectrometer (UV-Vis-DRS), X-ray diffractometer (XRD), and Field emission scanning electron microscope (FE-SEM). The FE-SEM images showed a sago-shaped embedded particle in gC3N4 layers with a 40-60 nm particle size. The band gap energy was found to be 2.69 eV from UV-Vis-DRS analysis. This proves the promising activity of sago-shaped HNC under sunlight radiation. Various preliminary and kinetic studies were conducted, and HNC possessed excellent photocatalytic activity for the degradation of an organic dye under sunlight. The photocatalytic activity for the degradation of dye by the prepared HNC was found to be two-fold when compared to the activity of pristine gC3N4 under sunlight irradiation.

Solar-powered detection of organic dyes using nitrogen-doped N-TiO2/Ag2O nanorod arrays.

Organic pollutant detection has caused widespread concern regarding due to their potential environmental and human health risks. In this work, a nitrogen-doped titanium dioxide/silver oxide (N-TiO2/Ag2O) composite has been designed asa sensitive photoelectrochemical (PEC) monitoring platform of organic dyes. Sensitive determination relies on the outstanding PEC performance of N-TiO2/Ag2O. The improved PEC performance stems from the effective separation of photocarriers and the extended light response range provided by the narrowing bandgap and a p-n junction with N-TiO2/Ag2O. The N-TiO2/Ag2O electrode exhibits a photocurrent density of up to 2.2mA/cm2, demonstrating three times increase compared withthe photocurrent density observed with the pure TiO2 film. The linear detection range for rhodamine B (RhB), methylene blue (MB), and methyl orange (MO) is 0.2ng/mL to 10 μg/mL with an ultrasensitive detection limit of 0.2ng/mL without bias voltage. Due to the outstanding photocurrent density and sensitive response to organic pollutants, the N-TiO2/Ag2O PEC sensor provided a promising analytical method to detect environmental organic dyes.

Photocatalytic degradation of Rhodamine B dye via Bi2O3 embedded BaO-P2O5-TeO2 glass nanocomposites: An ab initio study of structural, optical, and electrical transport properties

Bismuth incorporated glassy systems with composition xBi2O3-(1-x) [0.3BaO-0.3P2O5-0.4TeO2] (where x = 0.10, 0.15, 0.20, and 0.25) are synthesized by melt quenching technique. The glassy systems are examined for their structural, and surface morphological properties using XRD, SEM, and EDX analysis. A study of photocatalytic activity for the degradation of common organic dyes like Rhodamine B (RhB) dye under visible light is also carried out. From UV-vis absorbance data, the calculated optical band gap energy values declined from (2.99-2.56) eV, whereas the Urbach energy and refractive index values increased from (0.35 -0.52) eV, and (2.39 - 2.52), respectively with the rise of Bi2O3 content(x). Additionally, the fundamental processes of electrical conductivity have been studied within the framework of Jonscher's universal power law and the Almond-West formalism. The Mott and Greaves model asserts that the small polaron hopping model underlies DC conductivity; as Bi2O3 content increases, DC conductivity rises, but hopping distance (Rhop) and hopping energy (Whop) drop dramatically. The electrical conductivity study reveals the semi-conducting nature of the as-prepared samples. In our present study, we are focusing on the structural, optical, and electrical transportation properties, additionally, we investigated this class of glassy materials as a promising candidate for photocatalytic dye degradation. Our study reveals that RhB dye can degrade up to 75% within 340 min of visible light illumination. Moreover, the test demonstrates the production of superoxide radicals by the CB-electrons and hydroxyl radicals by the VB holes enables efficient photocatalytic dye degradation.

Ultrasonication-assisted synthesis of transition metal carbide of MXene: an efficient and promising material for photocatalytic organic dyes degradation of rhodamine B and methylene blue in wastewater.

Water pollutants of non-biodegradable toxic aromatic dye including Methylene blue (MB) and Rhodamine (RhB) are extremely carcinogenic thiazines used in various industries such asleather industry, paper industry, and the dyeing industry. The presence of dyes in wastewater causes severe threats to human health that are responsible for various harmful chronic or acute diseases and also shows an adverse impact on the environment as it reduces transparency and is harmful to water microorganisms. To overcome severe issues, many traditional techniques have been used to remove toxic pollutants, but thesemethods are insufficient to remove chemically stable dyes that remain in the treated wastewater. However, the photocatalytic degradation process is an efficient approach to degrade the dye up to the maximum extent with improved efficiency. Therefore, in this work, a new class of two-dimensional (2D) transition metal carbide of Titanium Carbide (Ti3C2Tx) MXene material was used for the organic dyes degradation such as MB and RhB using a photocatalytic process. A layered structure of hexagonal lattice symmetry of Ti3C2Tx MXene was successfully synthesized from the Titanium Aluminum Carbide ofTi3AlC2 bulk phase using an exfoliation process. Further, the XRD spectrum confirms the transformation of bulk MAX phase having (002) plane at 9.2° to Ti3C2Tx MXene of (002) plane at 8.88° confirms the successful removal of Al layer from MAX phase. A smooth, transparent, thin sheet-like morphology of Ti3C2Txnanosheet sizewere found to be in the range of 70 to 150nm evaluated fromTEM images. Also,no holes or damages in the thin sheets were foundafter the treatment with strong hydrofluoric acid confirms the formationTi3C2Tx layered sheets. The synthesized Ti3C2Tx MXene possesses excellent photocatalytic activity for the degradation of dyes MB, RhB, and mixtures of MB and RhB dyes. MB dye degraded with a degradation percentage efficiency of 99.32% in 30min, while RhB dye was degraded upto98.9% in 30min. Also, experiments were conducted for degradation ofmixture of MB and RhB dyes by UV light, and the degradationpercentage efficiency were found to be 98.9% and 99.75% for mixture of MB and RhB dyein 45min, respectively. Moreover, reaction rate constant (k) was determined for each dye of MB, RhB, and mixtures of MB and RhB and was found to be 0.0215min-1 and 0.0058min-1, and for mixtures, it was 0.0020min-1 and 0.009min-1, respectively.

Correlating semiconductor nanoparticle architecture and applicability for the controlled encoding of luminescent polymer microparticles

Luminophore stained micro- and nanobeads made from organic polymers like polystyrene (PS) are broadly used in the life and material sciences as luminescent reporters, for bead-based assays, sensor arrays, printable barcodes, security inks, and the calibration of fluorescence microscopes and flow cytometers. Initially mostly prepared with organic dyes, meanwhile luminescent core/shell nanoparticles (NPs) like spherical semiconductor quantum dots (QDs) are increasingly employed for bead encoding. This is related to their narrower emission spectra, tuneability of emission color, broad wavelength excitability, and better photostability. However, correlations between particle architecture, morphology, and photoluminescence (PL) of the luminescent nanocrystals used for encoding and the optical properties of the NP-stained beads have been rarely explored. This encouraged us to perform a screening study on the incorporation of different types of luminescent core/shell semiconductor nanocrystals into polymer microparticles (PMPs) by a radical-induced polymerization reaction. Nanocrystals explored include CdSe/CdS QDs of varying CdS shell thickness, a CdSe/ZnS core/shell QD, CdSe/CdS quantum rods (QRs), and CdSe/CdS nanoplatelets (NPLs). Thereby, we focused on the applicability of these NPs for the polymerization synthesis approach used and quantified the preservation of the initial NP luminescence. The spectroscopic characterization of the resulting PMPs revealed the successful staining of the PMPs with luminescent CdSe/CdS QDs and CdSe/CdS NPLs. In contrast, usage of CdSe/CdS QRs and CdSe QDs with a ZnS shell did not yield luminescent PMPs. The results of this study provide new insights into structure–property relationships between NP stained PMPs and the initial luminescent NPs applied for staining and underline the importance of such studies for the performance optimization of NP-stained beads.

Novel Biomaterial-Derived Activated Carbon from Lippia Adoensis (Var. Koseret) Leaf for Efficient Organic Pollutant Dye Removal from Water Solution

Novel Biomaterial-Derived Activated Carbon from Lippia Adoensis (Var. Koseret) Leaf for Efficient Organic Pollutant Dye Removal from Water Solution

Facile fabrication of MgAl2O4/MWCNT nanocomposite for efficient and stable solar-driven degradation of organic dye

This work reports the synthesis and characterization of Magnesium Aluminate (MgAl2O4) and Magnesium Aluminate/Multi Walled Carbon Nanotube (MgAl2O4/MWCNT) nanocomposite by facile chemical co-precipitation method for the dye degradation application. MgAl2O4 and MgAl2O4/MWCNT nanocomposite are characterized by Scanning Electron Microscopy (SEM), x-ray Diffractometry (XRD), Raman Spectrometry, UV–vis Spectrophotometry (UV–vis), Fourier Transform Infrared Spectroscopy(FTIR), and x-ray Photoelectron Spectroscopy (XPS). Surface morphology of MgAl2O4/MWCNT nanocomposite exhibits entangled needle-like structures while MgAl2O4 spinel comprises agglomerated nanoparticles of different sizes. XRD confirms the formation of MgAl2O4. XPS identifies the chemical states and binding energies of constituent elements present in the sample. Optical properties reveal that addition of MWCNTs in MgAl2O4 decreases the optical bandgap energy from 3.02 eV to 2.78 eV. MgAl2O4/MWCNT nanocomposite shows reduced bandgap compared to pristine MgAl2O4 due to increased chemical defects or vacancies in intergranular regions and chemical interaction between MgAl2O4 and MWCNT, leading to the formation of new energy levels in MgAl2O4/MWCNT nanocomposite. Addition of MWCNTs provides a large surface area, more active sites, and enhances electron mobility between energy levels. MgAl2O4/MWCNT nanocomposite proves itself a better photocatalyst due to the fast degradation of Methyl Blue (MB) in 65 min as compared to MgAl2O4 which degrades the dye in 90 min. MgAl2O4/MWCNT nanocomposite also shows good stability and reusability even after performing the six cycles of dye degradation.

Enhancement of methylene blue catalytic reduction by novel green synthesized metal decorated reduced graphene oxide: Sn@rGO and Ag@rGO

Carbon-based nanocomposites (NCs) attracted much attention in heterogeneous catalysis to remove organic dyes. Herein, a novel low-cost green approach was utilized to design a reduced graphene oxide (rGO) impregnated with Sn or Ag nanoparticles (NPs) using ginger extract as a green reducing agent. The synthesized NCs were characterized utilizing X-ray diffraction (XRD), Fourier transformation infrared (FTIR), transmission electron microscopy (TEM), energy-dispersive X-ray (EDX), Raman spectroscopy, and thermal gravimetric analysis (TGA). The synthesized NCs were assessed for their catalytic reduction activity towards methylene blue (MB) dye. XRD displayed the characteristic peaks of Sn- and Ag-NPs and the reduction of GO, referring to successful NC formation. FTIR and Raman confirmed the reduction of GO and the incorporation of Sn and Ag-NPs into the GO surfaces. TEM results proved that either Sn- or Ag-NPs was uniformly dispersed on rGO sheets with average sizes of 4.129 and 7.293 nm, respectively. EDX spectra of Sn@rGO- and Ag@rGO-NCs revealed the presence of C, O, Sn, and Ag. TGA confirmed the increased thermal stability of the NCs as compared to GO. Ag@rGO-NC exhibited stronger catalytic MB reduction (97% after 10 min) than Sn@rGO-NC (80% after 20 min). To the best of our knowledge, this is the first time Sn@rGO-NC has been designed for MB catalytic reduction, which gives rise to its promising capacity for future catalytic applications.

On the diverse utility of Cu doped ZnS/Fe3O4 nanocomposites.

The global water crisis is a growing concern, with water pollution from organic dyes being a significant issue. Photocatalysis has emerged as a sustainable and renewable method for removing organic pollutants from wastewater. The study synthesized innovative (2.5, 5 and 10 wt%) Cu doped zinc sulfide/iron oxide nanocomposites using a sonochemical method, which have versatile applications in adsorption and photocatalytic degradation of organic pollutants in wastewater. The nanocomposites underwent comprehensive characterization using powder X-ray diffraction, fourier-transform infrared spectroscopy, photoluminescence spectroscopy, Ultraviolet-Visible spectrophotometer, field emission scanning electron microscopy combined with energy dispersive X-ray spectroscopy and Mott-Schottky analysis. The synthesized samples demonstrate strong adsorption ability to remove RhB and MB dyes. Afterward, we evaluated their capability to degrade Rhodamine B (RhB) dye under UV light exposure. The greatest photocatalytic efficiency was noticed when employing a UV-C lamp in combination with the 10 wt% Cu doped ZnS/Fe3O4 nanocomposite as photocatalyst (98.8% degradation after 60 min irradiation). The Langmuir-Hinshelwood model can be used to describe the pseudo first order kinetics of RhB dye photodegradation. The calculated ban gap values are 4.77, 4.67, and 4.55 eV, for (2.5, 5 and 10 wt%) Cu doped ZnS/Fe3O4, respectively. Furthermore, 10 wt% Cu doped ZnS/Fe3O4 showed good recyclability, with a degradation rate of 89% even after five cycles. Consequently, prepared samples have outstanding photocatalytic activity and can be used as useful adsorbents in water purification.

Wurtzite CdS ratio tunability on α-Fe2O3/CdS synergistic heterostructure for enhanced UV-induced photocatalytic decomposition of rhodamine 6G dye pollutant

Hematite α-Fe2O3 exhibits a slow catalytic reaction rate and low performance in aqueous pollutant decomposition. In this work, α-Fe2O3/CdS binary heterostructure composites were created by introducing different ratios of wurtzite CdS into α-Fe2O3 within 0–100 wt% via precipitation and impregnation methods. The photocatalytic performance of α-Fe2O3/CdS was enhanced for the decomposition of aqueous rhodamine 6G (R6G) dye under ultraviolet (UV) irradiation. SEM images reveal that higher CdS loading results in increased interfacial contact between rod-like CdS and spherical-shaped α-Fe2O3. XRD and FTIR results confirm the coexistence of rhombohedral α-Fe2O3 and hexagonal CdS phases, with peak strength proportional to the ratio of component loading, as the respective elements were verified through EDX analysis. The UV-Vis spectroscopic analysis exhibits an enhancement in optical absorption and band gap broadening as the CdS loading rises. α-Fe2O3/CdS with increased CdS loading exhibits faster and more efficient R6G degradation under UV exposure, as evidenced by greater rate constants and degradation efficiency, with optimal CdS loading of 90 wt% achieving a maximum efficiency of 79.14%. The present heterostructure could be employed in future wastewater remediation for effective removal of organic dye pollutants, further promoting clean water preservation for global environmental sustainability.

A novel GO hoisted SnO2-BiOBr bifunctional catalyst for the remediation of organic dyes under illumination by visible light and electrocatalytic water splitting.

It is imperative to develop affordable multi-functional catalysts based on transition metals for various applications, such as dye degradation or the production of green energy. For the first time, we propose a simple chemical bath method to create a SnO2-BiOBr-rGO heterojunction with remarkable photocatalytic and electrocatalytic activities. After introducing graphene oxide (GO) into the SnO2-BiOBr nanocomposite, the charge separation, electron mobility, surface area, and electrochemical properties were significantly improved. The X-ray diffraction results show the successful integration of GO into the SnO2-BiOBr nanocomposite. Systematic material characterization by scanning and transmission electron microscopy showed that the photocatalysts are composed of uniformly distributed SnO2 nanoparticles (∼11 nm) on the regular nanosheets of BiOBr (∼94 nm) and rGO. The SnO2-BiOBr-rGO photocatalyst has outstanding photocatalytic activity when it comes to reducing a variety of organic dyes like rhodamine B (RhB) and methylene blue (MB). Within 90 minutes of visible light illumination, degradation of a maximum of 99% for MB and 99.8% for RhB was noted. The oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) performance was also tested for the ternary nanocomposite, and significantly lower overpotential values of 0.34 and -0.11 V (vs. RHE) at 10 mA cm-2 were observed for the OER and HER, respectively. Furthermore, the Tafel slope values are 34 and 39 mV dec-1 for the OER and HER, respectively. The catalytic degradation of dyes with visible light and efficient OER and HER performance offer this work a broad spectrum of potential applications.

Solar Cell Enhancement from Supercritical CO2Dye Surface Modification of Mesoporous TiO2Photoanodes.

In recent years, in an effort to reach Net Zero Emissions, there has been growing interest by various academic and industry communities to develop chemicals and industrial processes that are circular, sustainable and green. We report the rapid, simple and effective surface modification of a porous metal oxide with organic dyes using supercritical carbon dioxide (scCO2). Titanium dioxide (TiO2) photoanodes were coated in very short times, under mild conditions and the excess dye recovered afterwards for reuse. The process obviates the need for conventional toxic solvents, the generation of unwanted waste streams, and more importantly, we see an unexpected device performance enhancement of 212 and 163% for TerCOOTMS, 2a and TerCN/COOTBDMS, 4 dyes, respectively, when compared to the conventional solvent deposition method.

Facile access to benzofuran-based bis-stilbene for organic laser dyes

A concise and efficient synthetic protocol for the synthesis of furan-based bis-stilbene derivatives (BPBFCz1) was described, which is a very promising organic laser dye. Starting with 4,4’-diethynylbiphenyl, BPBFCz1 was prepared with a total yield of 40% through a three-step classical reaction of Sonogashira Coupling, intramolecular cyclization of 2-alkynyl phenol, and Buchwald Hartwig cross-coupling. The crystal structure of BPBFCz1 was presented for the first time. The synthesis strategy was applied to the synthesis of other three materials with similar structure and the yields of 28.6–36.6% were obtained.

Congo red dye reduction mediated by the electron (e-) transfer route of BH4- ions using synthesized NiCo2O4/rGO hybrid nanosheets

Abstract The treatment of toxic organic pollutants is extremely important for the conservation of clean air, soil, and water. In this study, (reduced graphene oxide) NiCo2O4/ rGO hybrid nanocomposite was prepared by a facile hydrothermal technique and employed for organic dye degradation from wastewater. The synthesized NiCo2O4/rGO hybrid nanocomposite was studied using FTIR, XRD, SEM, TEM, BET, Raman spectroscopy, and UV-visible. The physical characterizations prove the deposition of NiCo2O4 particles on the rGO surface. The transmission electron microscope image demonstrated that the NiCo2O4 particles with an average size of ~46 nm was dispersed on the rGO surface. The obtained nanoparticles show a higher specific surface area of 56.4 m2/g. Adsorption dynamics as investigated by time and concentration variation show that the adsorption data follows pseudosecond order kinetics and the Langmuir isotherm model, with a maximum adsorption capacity of 106.2 mg/g, indicating homogeneous physiochemical adsorption of CR dye on the adsorbent surface. Besides, the catalytic effectiveness of synthesized nanocomposite towards Congo red (CR) dye reduction mediated by the electron (e-) transfer route of BH4- ions was explained in detail. The electrostatic interaction used between the NiCo2O4/rGO hybrid composite and Congo red increased the degradation effectiveness of the dye sample. 


The self-boosting ultrafast removal of Cr(VI) and organic dye in textile wastewater through sulfite-induced redox processes

The treatment of textile wastewater containing harmful metal ions poses a significant challenge in industrial applications due to its environmental impact. In this study, the use of sulfite for treating simulated dye wastewater containing New Coccine (NC) and Cr(VI) was investigated. The removal of NC was influenced by the redox reaction between Cr(VI) and sulfite, demonstrating a strong self-boosting effect of Cr(VI) on NC removal. Remarkable NC decoloration (95%) and Cr(VI) reduction (90%) were achieved within 1 min, highlighting the effectiveness of the treatment. Quenching experiments and electron paramagnetic resonance (EPR) technology confirmed that singlet oxygen (1O2) was the main oxidative agent for organic dye removal and SO4•−, •OH and Cr(V) were also identified as key contributors to NC degradation. The Cr(VI)/sulfite system exhibited higher efficiency in degrading azo dyes, such as NC and Congo Red (CR), compared to non-azo dyes like Methylene Blue (MB). This superiority may be attributed to the action of Cr(V) on azo groups. Additionally, the COD removal experiments were conducted on the actual dye wastewater, showing the excellent performance of the Cr(VI)/Sulfite system in treating industrial textile wastewater. This approach presents a promising strategy for effective “waste control by waste”, offering great potential for addressing challenges related to dye wastewater treatment and environmental pollution control in practical industrial scenarios.

Highly Efficient Luminescent Solar Concentrators Based on BODIPY Derivatives

AbstractThree new chromophores based on difluoroborondipyrromethene dyes (Bodipy‐1, Bodipy‐2, and Bodipy‐3) are used as precursors to prepare luminescent solar concentrators (LSC) based on poly‐acrylate, following a thermally activated polymerization involving lauryl methacrylate as monomer, ethyl glycol dimethacrylate as cross‐linking agent, and lauroyl peroxide as initiator. The new dyes exhibit typical BODIPY absorption and emission properties in dichloromethane fluid solution, assigned to the lower‐lying singlet π–π∗ level, which in the case of Bodipy‐2 and Bodipy‐3, both containing diamino‐substituted styryl subunits in their structure, has a strong charge transfer contribution. The LSCs obtained starting from each of the three Bodipys are interfaced to silicon photovoltaic (PV) cells, and the PV light‐to‐energy conversion efficiencies ηopt for the three systems are calculated. The results yield ηopt of 4.53% for LSC‐Bodipy‐1, 5.26% for LSC‐Bodipy‐2, and 8.23% for LSC‐Bodipy‐3. The optical efficiency for LSC‐Bodipy‐3 is a remarkable value among the LSC based on organic dyes.

Simultaneous Removal of Cadmium and Disperse Black-9 Dye Using Chemically Modified Rice Husk-Derived Activated Carbon

Heavy metals and organic dyes pose significant environmental concerns due to their persistence, toxicity, and tendency to accumulate in the food chain. These pollutants are often discharged from various industrial sources without proper management, resulting in unacceptable damage to the environment. The use of low-cost agricultural by-products can be a sustainable and green solution for the industrial effluent treatment process. In the present research, the effective removal of Cd2+ and disperse black‒9 (DB‒9) dye simultaneously was planned through the adsorption method utilizing specially activated carbon (AC) derived from rice husk. FTIR, SEM, and XRD were used to characterize the produced AC. The adsorption studies showed that approximately 88% of the dye DB‒9 and 97% of Cd2+ were adsorbed by using optimal dosages of the AC, which were 16 g/L and 12 g/L, respectively. In addition, it was successfully demonstrated that Cd2+ adsorbed AC was capable of binding with DB‒9 and also DB‒9 adsorbed AC is capable of binding with Cd2+. Therefore, a novel strategy for the simultaneous elimination of Cd2+ and DB-9 ideas was successfully implemented in the current study. In addition, equilibrium data were examined to assess the adsorbate-adsorbent system's isotherms. The Langmuir isotherm was determined to be the most well-fitting, with a maximum uptake of 11.48 mg/g. Thermodynamic study (ΔG⁰) showed that the adsorption process was spontaneous, and the adsorption process followed pseudo-second-order kinetics.

Fabrication and characterization of C–doped TiO2 nanoparticles for the photodegradation of organic dyes

A low-cost sol-gel method is used to synthesize C-doped TiO2 (C–TiO2) nanoparticles. Nanoparticles of undoped TiO2 and varying C weight percentages (4%, 6%, and 8%) of C–TiO2 are generated. XRD, FTIR, FESEM-EDS, UV–Vis DRS, PL, BET, and XPS are used to analyze the characteristics of all the nanoparticles. The EDS data indicate that the TiO2 lattice has been successfully doped with carbon. The band-gap energy of 6% C–TiO2 is shifted to 2.94 eV, as confirmed by UV–Vis DRS, resulting in improved visible-light absorption and, hence, increased photocatalytic activity by lowering the electron-hole recombination rate. Under natural sunlight irradiation, 6% C–TiO2 achieves a 91% removal efficiency of Rhodamine B (RhB) dye in 90 min and 84% removal efficiency of Congo Red (CR) dye in 30 min. A probable photodegradation pathway was estimated using the scavenger test, and the •O2 − and •OH radicals are recognized as potentially active species for RhB degradation.

Carbon Nanofiber Membranes Loaded with MXene @ g-C3N4: Preparation and Photocatalytic Property

In this study, a Ti3C2 MXene@g-C3N4 composite powder (TM-CN) was prepared by the ultrasonic self-assembly method and then loaded onto a carbon nanofiber membrane by the self-assembly properties of MXene for the treatment of organic pollutants in wastewater. The characterization of the TM-CN and the C-TM-CN was conducted via X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectrometer (FTIR) to ascertain the successful modification. The organic dye degradation experiments demonstrated that introducing an appropriate amount of Ti3C2 MXene resulted in the complete degradation of RhB within 60 min, three times the photocatalytic efficiency of a pure g-C3N4. The C-TM-CN exhibited the stable and outstanding photocatalytic degradation of the RhB solution over a wide range of pH values, indicating the characteristics of the photodegradation of organic pollutants in a wide range of aqueous environments. Furthermore, the results of the cyclic degradation experiments demonstrated that the C-TM-CN composite film maintained a degradation efficiency of over 85% after five cycles, thereby confirming a notable improvement in its cyclic stability. Consequently, the C-TM-CN composite film exhibits excellent photocatalytic performance and is readily recyclable, making it an auspicious eco-friendly material in water environment remediation.

The Influence of the Alkylamino Group on the Solvatochromic Behavior of 5-(4-substituted-arylidene)-1,3-dimethylpyrimidine-2,4,6-triones: Synthesis, Spectroscopic and Computational Studies.

Advances in electronics and medical diagnostics have made organic dyes extremely popular as key functional materials. From a practical viewpoint, it is necessary to assess the spectroscopic and physicochemical properties of newly designed dyes. In this context, the condensation of 1,3-dimethylbarbituric acid with electron-rich alkylaminobenzaldehyde derivatives has been described, resulting in a series of merocyanine-type dyes. These dyes exhibit intense blue-light absorption but weak fluorescence. An electron-donating alkylamino group at position C4 is responsible for the solvatochromic behavior of the dyes since the lone electron pair of the nitrogen atom is variably delocalized toward the barbituric ring, which exhibits electron-withdrawing properties. This was elucidated, taking into account the different geometry of the amino group. The intramolecular charge transfer in the molecules is responsible for the relatively high redshift in absorption and fluorescence spectra. Additionally, an increase in solvent polarity moves the absorption and fluorescence to lower energy regions. The observed solvatochromism is discussed in terms of the four-parameter Catalán solvent polarity scale. The differences in the behavior of the dyes were quantified with the aid of time-dependent density functional theory calculations. The obtained results made it possible to find regularities linking the basic spectroscopic properties of the compounds with their chemical structure. This is important in the targeted search for new, practically important dyes.