Acyl Chain Order Parameters Research Articles

Interactions of the C-terminus of lung surfactant protein B with lipid bilayers are modulated by acyl chain saturation

Lung surfactant protein B (SP-B) is critical to minimizing surface tension in the alveoli. The C-terminus of SP-B, residues 59–80, has much of the surface activity of the full protein and serves as a template for the development of synthetic surfactant replacements. The molecular mechanisms responsible for its ability to restore lung compliance were investigated with circular dichroism, differential scanning calorimetry, and 31P and 2H solid-state NMR spectroscopy. SP-B 59–80 forms an amphipathic helix which alters lipid organization and acyl chain dynamics in fluid lamellar phase 4:1 DPPC:POPG and 3:1 POPC:POPG MLVs. At higher levels of SP-B 59–80 in the POPC:POPG lipid system a transition to a nonlamellar phase is observed while DPPC:POPG mixtures remain in a lamellar phase. Deuterium NMR shows an increase in acyl chain order in DPPC:POPG MLVs on addition of SP-B 59–80; in POPC:POPG MLVs, acyl chain order parameters decrease. Our results indicate SP-B 59–80 penetrates deeply into DPPC:POPG bilayers and binds more peripherally to POPC:POPG bilayers. Similar behavior has been observed for KL 4, a peptide mimetic of SP-B which was originally designed using SP-B 59–80 as a template and has been clinically demonstrated to be successful in treating respiratory distress syndrome. The ability of these helical peptides to differentially partition into lipid lamellae based on their degree of monounsaturation and subsequent changes in lipid dynamics suggest a mechanism for lipid organization and trafficking within the dynamic lung environment.

Pressure Perturbation Calorimetric Studies on Phospholipid-Sterol Mixtures

Sterols regulate biological processes and sustain the lateral structure of cellular membranes. The sterol cholesterol, its precursor lanosterol, the plant sterols stigmasterol and ergosterol as well as 7-dehydrocholesterol were added up to 36 mol-% to vesicles of the phospholipid 1,2-dipalmitoyl-snglycero- 3-phosphatidylcholine (DPPC). The aim of this study was to investigate the influence of the sterol side chain and ring structure on the volumetric properties of the lipid bilayer system by using pressure perturbation calorimetry (PPC), a relatively new and efficient technique, to study the thermal expansion coefficient and volumetric properties of biomolecules. The experiments were carried out in the temperature range from 10 to 85 °C, i. e., at temperatures below and above the chain-melting transition temperatures of the lipid mixtures. Additionally, corresponding differential scanning calorimetric (DSC) measurements were carried out.Whereas the conformational properties of the different sterols have a significant effect on the order parameter of the lipid acyl-chains, the thermodynamic parameters of these sterols are less influenced by the differential structural changes of the sterols. For lanosterol and stigmasterol, marked differences are found, however.

Effects of fluorescent probe NBD-PC on the structure, dynamics and phase transition of DPPC. A molecular dynamics and differential scanning calorimetry study

We present a combined theoretical (molecular dynamics, MD) and experimental (differential scanning calorimetry, DSC) study of the effect of 7-nitrobenz-2-oxa-1,3-diazol-4-yl (NBD) acyl chain-labeled fluorescent phospholipid analogs (C6-NBD-PC and C12-NBD-PC) on 1,2-dipalmitoyl- sn-glycero-3-phosphocholine (DPPC) bilayers. DSC measurements reveal that < 1 mol% of NBD-PC causes elimination of the pre-transition and a large loss of cooperativity of the main transition of DPPC. Labeling with C6-NBD-PC or C12-NBD-PC shifts the main transition temperature to lower or higher values, respectively. Following our recent report on the location and dynamics of these probes ( BBA 1768 (2007) 467–478) in fluid phase DPPC, we present a detailed analysis of 100-ns MD simulations of systems containing either C6-NBD-PC or C12-NBD-PC, focused on their influence on several properties of the host bilayer. Whereas most monitored parameters are not severely affected for 1.6 mol% of probe, for the higher concentration studied (6.2 mol%) important differences are evident. In agreement with published reports, we observed that the average area per phospholipid molecule increases, whereas DPPC acyl chain order parameters decrease. Moreover, we predict that incorporation of NBD-PC should increase the electrostatic potential across the bilayer and, especially for C12-NBD-PC, slow lateral diffusion of DPPC molecules and rotational mobility of DPPC acyl chains.

Lipid Lateral Segregation Driven by Diacyl Cyclodextrin Interactions at the Membrane Surface

Cyclodextrins are hydrophilic molecular cages with a hydrophobic interior allowing the inclusion of water-insoluble drugs. Amphiphilic cyclodextrins obtained by appending a hydrophobic anchor were designed to improve the cell targeting of the drug-containing cavities through their liposome transportation in the organism. After insertion in model membranes, they were found to induce a lateral phase separation into a pure lipid phase and a fluid cyclodextrin-rich phase (L CD) with reduced acyl chain order parameters, as observed with a derivative containing a cholesterol anchor (M. Roux, R. Auzely-Velty, F. Djedaïni-Pilard, and B. Perly. 2002. Biophysical Journal, 8:813–822). We present another class of amphiphilic cyclodextrins obtained by grafting aspartic acid esterified by two lauryl chains on the oligosaccharide core via a succinyl spacer. The obtained dilauryl- β-cyclodextrin ( βDLC) was inserted in chain perdeuterated dimyristoylphosphatidylcholine (DMPC-d54) membranes and studied by deuterium NMR ( 2H-NMR). A laterally segregated mixed phase was found to sequester three times more lipids than the cholesteryl derivative (∼4–5 lipids per monomer of βDLC), and a quasipure L CD phase could be obtained with a 20% molar concentration of βDLC. When cooled below the main fluid-to-gel transition of DMPC-d54 the βDLC-rich phase stays fluid, coexisting with pure lipid in the gel state, and exhibits a sharp transition to a gel phase with frozen DMPC acyl chains at 12.5°C. No lateral phase separation was observed with partially or fully methylated βDLC, confirming that the stability of the segregated L CD phase was governed through hydrogen-bond-mediated intermolecular interactions between cyclodextrin headgroups at the membrane surface. As opposed to native βDLC, the methylated derivatives were found to strongly increase the orientational order of DMPC acyl chains as the temperature reaches the membrane fluid-to-gel transition. The results are discussed in relation to the “anomalous swelling” of saturated phosphatidylcholine multilamellar membranes known to occur in the vicinity of the main fluid-to-gel transition.

Solution Structure and Interaction of Cupiennin 1a, a Spider Venom Peptide, with Phospholipid Bilayers

The solution structure of cupiennin 1a, a 35 residue, basic antibacterial peptide isolated from the venom of the spider Cupiennius salei, has been determined by nuclear magnetic resonance (NMR) spectroscopy. The peptide was found to adopt a helix-hinge-helix structure in a membrane mimicking solvent. The hinge may play a role in allowing the amphipathic N-terminal helix and polar C-terminal helix to orient independently upon membrane binding, in order to achieve maximal antibacterial efficacy. Solid-state 31P and 2H NMR was used to further study the effects of cupiennin 1a on the dynamic properties of lipid membranes, using zwitterionic chain deuterated dimyristoylphosphatidylcholine (d54-DMPC) and anionic dimyristoylphosphatidylglycerol (DMPG) multilamellar vesicles. In d54-DMPC alone, cupiennin 1a caused a decrease in the 31P chemical shift anisotropy, indicating some interaction with the lipid head groups, and a decrease in order over the entire acyl chain. In contrast, for the mixed (d54-DMPC/DMPG) lipid system cupiennin 1a appeared to induce lateral separation of the two lipids as evidenced by the 31P spectra, in which the peptide preferentially interacted with DMPG. Little effect was observed on the deuterated acyl chain order parameters in the d54-DMPC/DMPG model membranes. Furthermore, 31P NMR relaxation measurements confirmed a differential effect on the lipid motions depending upon the membrane composition. Therefore, subtle differences are likely in the mechanism by which cupiennin 1a causes membrane lysis in either prokaryotic or eukaryotic cells, and may explain the specific spectrum of activity.

Fusion Peptide of Influenza Hemagglutinin Requires a Fixed Angle Boomerang Structure for Activity

The fusion peptide of influenza hemagglutinin is crucial for cell entry of this virus. Previous studies showed that this peptide adopts a boomerang-shaped structure in lipid model membranes at the pH of membrane fusion. To examine the role of the boomerang in fusion, we changed several residues proposed to stabilize the kink in this structure and measured fusion. Among these, mutants E11A and W14A expressed hemagglutinins with hemifusion and no fusion activities, and F9A and N12A had no effect on fusion, respectively. Binding enthalpies and free energies of mutant peptides to model membranes and their ability to perturb lipid bilayer structures correlated well with the fusion activities of the parent full-length molecules. The structure of W14A determined by NMR and site-directed spin labeling features a flexible kink that points out of the membrane, in sharp contrast to the more ordered boomerang of the wild-type, which points into the membrane. A specific fixed angle boomerang structure is thus required to support membrane fusion.

Partitioning of dual-lipidated peptides into membrane microdomains: lipid sorting vs peptide aggregation.

The lateral membrane organization and phase behavior of the lipid mixture DMPC(di-C(14))/DSPC(di-C(18))/cholesterol (0-33 mol %) with and without an incorporated fluorescence-labeled palmitoyl/farnesyl dual-lipidated peptide, BODIPY-Gly-Cys(Pal)-Met-Gly-Leu-Pro-Cys(Far)-OMe, which represents a membrane recognition model system for Ras proteins, was studied by two-photon excitation fluorescence microscopy. Measurements were performed on giant unilamellar vesicles (GUVs) over a large temperature range, ranging from 30 to 80 degrees C to cover different lipid phase states (all-gel, fluid/gel, liquid-ordered, all-fluid). At temperatures where the fluid-gel coexistence region of the pure binary phospholipid system occurs, large-scale concentration fluctuations appear. Incorporation of cholesterol levels up to 33 mol % leads to a significant increase of conformational order in the membrane system and a reduction of large domain structures. Adding the peptide leads to dramatic changes in the lateral organization of the membrane. With cholesterol present, a phase separation is induced by a lipid sorting mechanism owing to the high affinity of the lipidated peptide to a fluid, DMPC-rich environment. This phase separation leads to the formation of peptide-containing domains with high fluorescence intensity that become progressively smaller with decreasing temperature. As a result, the local concentration of the peptide increases steadily within the confines of the shrinking domains. At the lowest temperatures, where the acyl-chain order parameter of the membrane has already drastically increased and the membrane achieves a liquid-ordered character, an efficient lipid sorting mechanism is no longer supported and aggregation of the peptide into small clusters prevails. We can conclude that palmitoyl/farnesyl dual-lipidated peptides do not associate with liquid-ordered or gel-like domains in phase-separated bilayer membranes. In particular, the study shows the interesting ability of the peptide to induce formation of fluid microdomains at physiologically relevant cholesterol concentrations, and this effect very much depends on the concentration of fluid vs ordered lipid molecules.

Effect of Sodium Chloride on a Lipid Bilayer

Electrostatic interactions govern structural and dynamical properties of membranes and can vary considerably with the composition of the aqueous buffer. We studied the influence of sodium chloride on a pure POPC lipid bilayer by fluorescence correlation spectroscopy experiments and molecular dynamics simulations. Increasing sodium chloride concentration was found to decrease the self-diffusion of POPC lipids within the bilayer. Self-diffusion coefficients calculated from the 100ns simulations agree with those measured on a millisecond timescale, suggesting that most of the relaxation processes relevant for lipid diffusion are faster than the simulation timescale. As the dominant effect, the molecular dynamics simulations revealed a tight binding of sodium ions to the carbonyl oxygens of on average three lipids leading to larger complexes with reduced mobility. Additionally, the bilayer thickens by ∼2Å, which increases the order parameter of the fatty acyl chains. Sodium binding alters the electrostatic potential, which is largely compensated by a changed polarization of the aqueous medium and a lipid dipole reorientation.

A Microscopic Interaction Model of Maximum Solubility of Cholesterol in Lipid Bilayers

We recently reported the equilibrium maximum solubility of cholesterol in a lipid bilayer, χ * chol, to be 0.66 in four different phosphatidylcholines, and 0.51 in a phosphatidylethanolamine (Huang, J., J. T. Buboltz, and G. W. Feigenson. 1999. Biochim. Biophys. Acta. in press). Here we present a model of cholesterol-phospholipid mixing that explains these observed values of χ * chol. Monte Carlo simulations show that pairwise-additivity of nearest-neighbor interactions is inadequate to describe all the χ * chol values. Instead, if cholesterol multibody interactions are assigned highly unfavorable energy, then jumps occur in cholesterol chemical potential that lead to its precipitation from the bilayer. Cholesterol precipitation is most likely to occur near three discrete values of cholesterol mole fraction, 0.50, 0.57, and 0.67, which correspond to cholesterol/phospholipid mole ratios of 1/1, 4/3, and 2/1, respectively. At these solubility limits, where cholesterol chemical potential jumps, the cholesterol-phospholipid bilayer mixture forms highly regular lipid distributions in order to minimize cholesterol-cholesterol contacts. This treatment shows that dramatic structural and thermodynamic changes can occur at particular cholesterol mole fractions without any stoichiometric complex formation. The physical origin of the unfavorable cholesterol multibody interaction is explained by an “umbrella model”: in a bilayer, nonpolar cholesterol relies on polar phospholipid headgroup coverage to avoid the unfavorable free energy of cholesterol contact with water. Thus, at high cholesterol mole fraction, this unfavorable free energy, not any favorable cholesterol-phospholipid interaction, dominates the mixing behavior. This physical origin also explains the “cholesterol condensing effect” and the increase in acyl chain order parameter in cholesterol-phospholipid mixtures.

Constant pressure and temperature molecular-dynamics simulation of the hydrated diphytanolphosphatidylcholine lipid bilayer

Diphytanolphosphatidylcholine (DPhPC) is a lipid widely used in the study of membrane channel activity. Herein we report the results of a constant temperature (T=25 °C) and constant pressure (p=1 atm) molecular-dynamics (MD) simulation of a hydrated liquid crystal phase DPhPC bilayer. The simulated system consisted of a periodically replicated cell containing 64 lipid and 1792 water molecules. The system was monitored during a trajectory spanning more than one nanosecond. The resulting unconstrained area density per lipid agreed quantitatively with experimental data. The calculated bilayer profile and acyl chain order parameters also compared favorably with x-ray scattering and nuclear magnetic resonance (NMR) data.

Lipid bilayer perturbations induced by simple hydrophobic peptides.

Mixtures of tripeptides of the form Ala-X-Ala-O-tert-butyl with 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) bilayers have been used as a model system for studying the influence of hydrophobic peptides on membrane order and dynamic properties by means of deuterium NMR spectroscopy. Tripeptides with X = Ala, Leu, Phe, and Trp have been examined. Lipid 2H NMR spectra of acyl chain perdeuteriated DMPC ([2H54]DMPC) show that the addition of peptide disorders the bilayer lipid acyl chains and that the extent of the perturbation increases as the size of the central residue increases. Moment analyses of the spectra indicate that, while the average acyl chain order parameter decreases with increasing central residue size, the order parameter spread across the bilayer (the mean-squared width of the distribution) increases. Lipid segmental 2H longitudinal relaxation rates, 1/T1(i), exhibit a square-law functional dependence on SCD(i) both with and without the addition of peptide. The addition of peptide causes an increase in the slope of plots of 1/T1(i) vs. (SCD(i))2 with little change in the 1/T1(i) intercept, indicating a complex modulation of the acyl chain motions. 2H NMR spectra of Ala-[2H4]Ala-Ala-O-tert-butyl in DMPC bilayers have both isotropic and powder pattern components that vary as a function of temperature. At 30 degrees C the 2H spin-lattice relaxation times for the labeled Ala residue increase in going from bilayer-incorporated peptide to polycrystalline peptide to polycrystalline Ala.HCl. These experiments provide no information on the location of these peptides in the bilayer.(ABSTRACT TRUNCATED AT 250 WORDS)

Chain dynamics of selectively deuterated fatty acids in high-density lipoproteins studied by deuterium NMR.

Deuterium order parameters have been determined for approximately 5 mol% selectively deuterated palmitic acid incorporated into the outer monolayer of high-density lipoproteins (HDL3). The values are SCD = 0.38 for [2,2-2H2]palmitic acid, 0.38 for [4,4-2H2]palmitic acid, 0.37 for [5,5,6,6-2H4]palmitic acid, 0.23 for [11,11,12,12-2H4]palmitic acid, and 0.05 for [16,16,16-2H3]palmitic acid. Comparison of the acyl chain order parameters in HDL3 with acyl chain order parameters determined recently [Parmar, Y.I., Wassall, S.R., & Cushley, R.J. (1984) J. Am. Chem. Soc. 106, 2434-2435] for approximately 5 mol% deuterated palmitic acid in sonicated unilamellar vesicles, composed of the same ratio of phosphatidylcholine/sphingomyelin (85/15 w/w) found in HDL3, shows that acyl chain order in the HDL3 monolayer is approximately 3-5 times higher than in the vesicle bilayer. The acyl chain order in the lipoprotein monolayer is approximately 1.5-2 times higher than in the bilayer of phosphatidylcholine multilamellar dispersions. Deuterium longitudinal relaxation times have been measured for deuterated palmitic acid in HDL3, and the values T1 approximately 16 ms for C2H2 and 170 ms for C2H3 groups are a factor of more than 2 times smaller than found in phospholipid bilayers.

Bilayer acyl chain dynamics and lipid-protein interaction: the effect of the M13 bacteriophage coat protein on the decay of the fluorescence anisotropy of parinaric acid

Nanosecond fluorescence polarization anisotropy decay is used to determine the effect of the bacteriophage M13 coat protein on lipid bilayer acyl chain dynamics and order. The fluorescent acyl chain analogues cis- and trans-parinaric acid were used to determine the rate and extent of the angular motion of acyl chains in liquid crystalline (39 degrees C) dimyristoylphosphatidylcholine bilayers free of coat protein or containing the coat protein at a protein:lipid ratio of 1:30. Subnanosecond time resolution was obtained by using synchrotron radiation as the excitation source for single photon counting detection. Previous measurements of Förster energy transfer from coat protein tryptophan to cis- or trans-parinaric acid have shown that these probes are randomly distributed in the bilayer with respect to the protein. The anisotropy decay observed for pure bilayers has the form of a rapid drop, followed by a nonzero constant region extending from roughly 3 ns to at least 12 ns. The magnitude of the anisotropy in the plateau region is simply related to the acyl chain order parameter. The effect of the M13 coat protein is to increase the acyl chain order parameter significantly while having only a small effect on the rate of angular relaxation. This behavior is rationalized in terms of a simple microscopic model. The order parameters for pure lipid and coat protein containing bilayers are compared to 2H-NMR values.

Rate limitation of (Na+ + K+)-stimulated adenosinetriphosphatase by membrane acyl chain ordering.

A somatic cell mutant (CR1) of the Chinese hamster ovary cell line (CHO-K1) that is defective in the regulation of cholesterol biosynthesis can be grown under conditions in which plasma membranes from these cells display various cholesterol contents and acyl chain order parameters. The (Na+ + K+)-stimulated adenosinetriphosphatase (ATP phosphohydrolase, EC 3.6.1.3) from these cells was shown to vary in activity by a factor of 10 as the order parameter was varied, and the activity exhibited an exponential dependence on this parameter. Under these conditions the number of Na+,K+-ATPase molecules was shown to remain constant by affinity labeling with [gamma-32P]ATP in the absence of Na+. Control experiments showed that alteration in cholesterol content without change in order parameter did not result in altered enzyme activity. It is concluded that, under our conditions, the rate of catalysis by the Na+,K+-ATPase is determined by the order parameter. These studies suggest a physical mechanism by which variation of membrane lipid composition or other factors that determine membrane lipid acyl chain order parameter can result in variation in membrane enzyme activity.