Orbital Diagrams Research Articles

Nature of Charge Transfer Effects in Complexes of Dopamine Derivatives Adsorbed on Graphene-Type Nanostructures

Continuing the investigation started for dopamine (DA) and dopamine-o-quinone (DoQ) (see, the light absorption and charge transfer properties of the dopamine zwitterion (called dopamine-semiquinone or DsQ) adsorbed on the graphene nanoparticle surface is investigated using the ground state and linear-response time-dependent density functional theories, considering the ωB97X-D3BJ/def2-TZVPP level of theory. In terms of the strength of molecular adsorption on the surface, the DsQ form has 50% higher binding energy than that found in our previous work for the DA or DoQ cases (−20.24 kcal/mol vs. −30.41 kcal/mol). The results obtained for electronically excited states and UV-Vis absorption spectra show that the photochemical behavior of DsQ is more similar to DA than that observed for DoQ. Of the three systems analyzed, the DsQ-based complex shows the most active charge transfer (CT) phenomenon, both in terms of the number of CT-like states and the amount of charge transferred. Of the first thirty electronically excited states computed for the DsQ case, eleven are purely of the CT type, and nine are mixed CT and localized (or Frenkel) excitations. By varying the adsorption distance between the molecule and the surface vertically, the amount of charge transfer obtained for DA decreases significantly as the distance increases: for DoQ it remains stable, for DsQ there are states for which little change is observed, and for others, there is a significant change. Furthermore, the mechanistic compilation of the electron orbital diagrams of the individual components cannot describe in detail the nature of the excitations inside the complex.

Plasmonic Au-NPs photodecorated on NiCoLDH nanosheets as a flexible SERS sensor for the real-time detection of fipronil

Rapid extraction and detection of probe molecules from curved surfaces is critical for on-site and real-time detection. In this study, a flexible platform was developed using carbon cloth (CC) to create honeycomb-like nickel cobalt layered double hydroxides (NiCoLDH) nanosheets via a simple electrodeposition technique, which were then decorated with gold nanoparticles (Au-NPs) via photodeposition process. The Au-NPs/NiCoLDH/CC was designed as a surface-enhanced Raman scattering (SERS) substrate for detecting the broad-spectrum insecticide, Fipronil (FP). The fabricated sensor achieves a superior SERS activity due to the electrodeposited NiCoLDH, which provides the charge-transfer effect, and the photodeposited Au-NPs, which generate efficient SERS hotspots through the electromagnetic effect. The Density Functional Theory (DFT) calculation was used to estimate the optimal geometry and frontier molecular orbital diagrams of the FP molecules. The influence of electrodeposition time on NiCoLDH production and Au-NPs decorating quantity was investigated in detail. Furthermore, the flexible SERS sensor has excellent sensitivity, homogeneity, a low limit of detection (LOD), and high reproducibility for FP detection. Even after 40 cycles of bending and torsion, the SERS substrate maintained excellent mechanical endurance. Through a direct-sampling approach, FP molecules on the surfaces and mesocarp region of grapes and tomatoes were successfully detected with lower LOD. These findings highlight the outstanding potential of the produced flexible SERS sensor for real-time and on-site insecticide detection, making it valuable for food security analysis and monitoring.

Addressing the Challenge of a Simultaneous Destructive Assay of Plutonium and Uranium: Highly Precise, Robust, Universal, and Reagent-Free Differential Pulse Voltametric Method Development in Biodegradable Methanesulfonic Acid Medium.

The destructive assay of bulk uranium and plutonium, a cornerstone for chemical quality control and nuclear material accounting of fuel matrices, mandates robust and precise methodologies. Despite ongoing research, simultaneous, matrix independent determination of U and Pu has eluded solution owing to inherent limitations in aqueous acid medium, viz., coexistence of multiple oxidation states, coupled electrochemical reactions, smaller potential window, and requirement for multistep sample preconditioning and tedious electrode modification. The present study addresses this challenge wherein non-aqueous methanesulfonic acid (MSA) served the dual role of solvent and analyte media with a bare glassy carbon (GC) electrode. Fuel matrices, viz., (U, Pu)C, (U, Pu)O2, PuO2, UO3, UO2, and U3O8, were quantitatively dissolved in biodegradable MSA, without using any additives. Redox speciation of the analytes, U and Pu, in MSA was probed by ultraviolet-visible spectrophotometry and electrometry, revealing the absence of electrocatalytic regeneration and stabilization of single oxidation state, viz., U(VI) and Pu(IV), along with relevant redox-energetic (electron transfer and reversibility) and kinetic data. Bidentate coordination of MSA with the U analyte was indicated by X-ray absorption spectroscopy studies and was corroborated by density functional theory-based investigations, providing the optimized structure, viz., [UO2(MSA)2] and [Pu(MSA)4], binding modes and energy, partial charges, and molecular orbital diagrams. Based on these insights, the feasibility of differential pulse voltammetry (DPV)-based assay method development for U and Pu separately and in different U/Pu ratios, representing assorted fuel matrices, was probed. Analytical figures of merit for both U and Pu (detection limit of ∼10-5 M, precision of ∼0.2%, accuracy of ∼0.2%, high sensitivity, repeatability, and non-influence of relevant interferences) were determined, method validated employing actual fuel samples, and compared with the established, multi-step biamperometry method. Hence, a universal, simultaneous U and Pu destructive assay method in non-aqueous MSA media based on DPV with a commercial GC electrode was demonstrated.

Formation of millisecond pulsars with wide orbits

ABSTRACT Millisecond pulsars (MSPs) are a kind of radio pulsars with short spin periods, playing a key role in many aspects of stellar astrophysics. In recent years, some more MSPs with wide orbits ($\gt 30\, \rm d$) have been discovered, but their origin is still highly unclear. In this work, according to an adiabatic power-law assumption for the mass-transfer process, we carried out a large number of complete binary evolution computations for the formation of MSPs with wide orbits through the iron core-collapse supernova (CCSN) channel, in which a neutron star originating from a CCSN accretes matter from a red-giant star and spun up to millisecond periods. We found that this channel can form the observed MSPs with wide orbits in the range of $30\!-\!1200\, {\rm d}$, in which the white dwarf (WD) companions have masses in the range of $0.28\!-\!0.55\, \rm M_{\odot }$. We also found that almost all the observed MSPs can be reproduced by this channel in the WD companion mass versus orbital period diagram. We estimate that the Galactic numbers of the resulting MSPs from the CCSN channel are in the range of $\sim 4.8\!-\!8.5\times 10^{5}$. Compared with the accretion-induced collapse channel, the CCSN channel provides a main way to produce MSPs with wide orbits.

Impact of the Position of the Hydroxyl Group in Monohydroxy Chalcones with 2-Hydroxypropyl-β-Cyclodextrin on Their Spectral, Biological, and Theoretical Properties

3-Hydroxychalcone (3HOCH) and 4-hydroxychalcone (4HOCH) compounds were synthesized from the reaction between acetophenone and either 3-hydroxybenzaldehyde or 4-hydroxy benzaldehyde, using KOH as a catalyst. Then the synthesized compounds were further reacted with two cyclodextrins (CDs) (2-hydroxypropyl-β-cyclodextrin and β-cyclodextrin), by a co-precipitation method to investigate their spectral (absorption, fluorescence, and Fourier transform infrared), biological, and theoretical properties. Two absorption maximums appeared at 307 and 253 nm for 3HOCH and 346 and 254 nm for 4HOCH in aqueous solution by absorption spectrophotometry. In the excited state, dual emission was observed at 362 nm and 426 nm for 3HOCH and 360 nm and 486 nm for 4HOCH in the same medium of H2O by fluorescence spectrophotometry. The apparent changes in the absorption and emission spectra were the result of the inclusion complex with a 1:1 molar stoichiometric ratio. The interaction of 3HOCH, 4HOCH, and the CDs in the solid state was characterized by Fourier-transform infrared spectroscopy (FTIR), powder X-ray diffraction patterns (PXRD), scanning electron microscopy (SEM), antioxidant and antibacterial studies concerning the position of the hydroxyl (-OH) group at the m- or p-positions in chalcone. The optimized highest occupied molecular orbital (HOMO) diagram, lowest unoccupied molecular orbital (LUMO) diagram and molecular electrostatic potential (MEP) map for the isolated molecules and their inclusion complexes were done by Becke’s three-parameter (B3) hybrid functional method using the Lee-Yang-Parr (LYP) correlation levels of density functional theory (DFT) method with 3-21 G basis set.

Unveiling the structural and bonding properties of AuSi2- and AuSi3- clusters: A comprehensive analysis of anion photoelectron spectroscopy and abinitio calculations.

Silicon clusters infused with transition metals, notably gold, exhibit distinct characteristics crucial for advancing microelectronics, catalysts, and energy storage technologies. This investigation delves into the structural and bonding attributes of gold-infused silicon clusters, specifically AuSi2- and AuSi3-. Utilizing anion photoelectron spectroscopy and abinitio computations, we explored the most stable isomers of these clusters. The analysis incorporated Natural Population Analysis, electron localization function, molecular orbital diagrams, adaptive natural density partitioning, and Wiberg bond index for a comprehensive bond assessment. Our discoveries reveal that cyclic configurations with the Au atom atop the Si-Si linkage within the fundamental Si2 and Si3 clusters offer the most energetically favorable structures for AuSi2- and AuSi3- anions, alongside their neutral counterparts. These anions exhibit notable highest occupied molecular orbital-lowest unoccupied molecular orbital gaps and significant σ and π bonding patterns, contributing to their chemical stability. Furthermore, AuSi2- demonstrates π aromaticity, while AuSi3- showcases a distinctive blend of σ antiaromaticity and π aromaticity, crucial for their structural robustness. These revelations expand our comprehension of gold-infused silicon clusters, laying a theoretical groundwork for their potential applications in high-performance solar cells and advanced functional materials.

Semiconductor Band Structure, Symmetry, and Molecular Interface Hybridization for the Chemist.

Merging molecular bonding concepts with semiconductor- and materials-based concepts of band structure is challenging due to the mutually exclusive historical development and notations used in those respective fields: symmetry adapted linear combinations (SALCs) and Mulliken terms for molecules, versus k space and Bloch sums for materials. This lack of commonality brings the issue of hybridization (aka electronic coupling) between molecules and materials to the forefront in many aspects of modern chemical research─including nanocrystal properties, solar energy conversion, and molecular computing. It is thus critical to establish a holistic approach to hybridizing orbital (molecule) and plane-wave (semiconductor/material) systems to better describe symmetry-based molecule|material bonding and the corresponding symmetry-adapted molecular orbital (MO) diagrams. Such a unified approach would enable the construction of testable hypotheses about the role of symmetry and electronic structure in determining the extent of electronic coupling between molecular orbitals and semiconductor band structure. This Perspective provides an analysis and compendium of "translations" between the physics and chemistry language of group theory. In this vein, this approach describes the symmetries─and corresponding point groups─that occur in k space along the available descent in symmetry pathways (k space vectors). As a result, chemists may arrive at a more intuitive understanding of the band symmetries of semiconductors, as well as insights into the corresponding algebraic formulations. This analysis can ultimately generate MO diagrams for hybrid molecule|material systems. Lastly, an Outlook provides some context to the application of this analysis to modern problems at the interface of molecular and materials chemistry.

A computational study of H-bonded networks in cyclic water clusters, (H2O)n (n = 3-12).

We have performed a detailed MM and DFT investigation of neutral water clusters (H2O)n (n = 3-12). Our results show the trend of interaction energies in these clusters as a function of the size of the cluster. They show that the H-bond strength increases with cluster size and that the model of water is better described if two different partial charges are used on the hydrogen, depending on whether hydrogen is H-bonded or not. The average binding enthalpy change due to the formation of H-bonds between water molecules is found to be - 25.9kJmol-1 at B3LYP/aug-cc-pVDZ level of theory. We observe the formation of cyclic H-bonded networks through the analysis of frontier orbitals and IR vibrational frequencies spectra. For the water cluster with n = 11, we observe an unusual reduction of the bandgap indicative of a cyclic H-bonded network. Calculations were performed with the MMFF94 force field and the B3LYP method using various large basis sets. Molecular orbital diagrams and population analysis were done using standard tools in Gaussian.

Precise recognition and efficient recovery of Pd(II) from high-level liquid waste by a novel aminothiazole-functionalized silica-based adsorbent

Efficient recognition, separation and recovery of palladium from high-level liquid waste (HLLW) not only helps the safe, green and environmentally friendly disposal of nuclear waste, but also is an essential important supplement to overcome the growing shortage of natural palladium resources. Herein, a novel silica-based functional adsorbent named 2AT-SiAaC was prepared by a two-step method, i.e., grafting of 2-aminothiazole (2AT) via the amidated reaction after in-situ polymerization of acrylic monomers on porous silica. SEM, EDS, TG-DSC, BET and PXRD all proved the successful preparation of 2AT-SiAaC, and it exhibited ultrahigh adsorption selectivity for Pd(II) (Kd (distribution coefficient) ≥ 10,344.2 mL/g, SFPd/M (separation factor) ≥ 613.7), fast adsorption kinetics with short equilibrium time (t ≤ 1 h) and good adsorption capacity (Q ≥ 62.1 mg Pd/g). The dynamic column experiments shows that 2AT-SiAaC achieved efficiently separation of Pd(II) from simulated HLLW, and the enrichment coefficients (C/C0) of Pd(II) was as high as about 14 with the recovery rate nearly 99.9% and basically kept the same performance in three adsorption-desorption column cycle experiments. The adsorption mechanism was analyzed by FT-IR, XPS and DFT calculations, and the ultrahigh selectivity of 2AT-SiAaC was attributed to the preferred affinity of the soft N-donor atoms in 2AT for Pd(II). NO3− ions participated in the adsorption reaction to keep charge balance, and the frontier orbital electron density distribution diagram shows the charge transfer in the process of material preparation and adsorption. To sum up, 2AT-SiAaC adsorbent provided a new insight for precise recognition and efficient separation of Pd(II) from HLLW.

Ligand field theory, Pauli shields and ultra-covalency in organometallic chemistry.

This paper explores the ligand field picture applied to organometallic compounds. Given the dearth of experimental data, the high-level ab initio ligand field theory (aiLFT) method is deployed as a surrogate for experiment and the necessary d orbital sequences and relative energies are obtained computationally. These are fitted to local cellular ligand field (CLF) σ, π and δ bonding parameters. Results are reported for planar [Cu(CR3)4]-, (R = F, H), octahedral M(CO)6n (M = Fe, Mn, Cr, V, Ti; n = +2, +1, 0, -1, -2), and the sandwich compounds M(Cp)2 (Cp = cyclopentadienyl, M = Fe, Ni, V), [Ni(Cp)2]2+ and Cr(C6H6)2. With respect to the aiLFT framework, these organometallic systems behave just like coordination complexes and most maintain the integrity of their formal dn configurations. Both [Cu(CR3)4]- compounds are formulated as low-spin d8 CuIII species and have normal ligand fields consistent with their planar geometries. The metal carbonyls reveal a new way of counting valence electrons which only requires the CLF d orbital energy level diagram to rationalise the 18-electron rule as well as its many exceptions. The bonding in sandwich compounds shows a remarkable variation. In ferrocene, Cp- behaves as a strong field ligand, comparable to [CN]- in [Fe(CN)6]4-. Fe(Cp)2 is low spin as is Cr(C6H6)2. Cp- in Fe(Cp)2 is a weak σ donor, strong π donor and weak δ acceptor while benzene in Cr(C6H6)2 is also a weak σ and strong π donor but is a much better δ acceptor. In contrast, Cp- is weak field in high spin, 20-electron Ni(Cp)2 but 'ultra-covalent' in [Ni(Cp)2]2+. The formal IV oxidation state is too high for the ligand set and the integrity of the d6 configuration is lost. Similarly, [V(CO)6]- and [Ti(CO)6]2- are ultra-covalent except now the formal metal oxidation states are too negative. Both mechanisms relate to the breaching of the metal's 3s23p6 'Pauli shield' and these ultra-covalent systems lie outside the ab initio ligand field regime. However, within the ligand field regime, the bonding in 'coordination complexes' and 'organometallic compounds' has the same conceptual footing and the nature of the local σ, π and δ interactions can be extracted from analysing the ligand field d orbitals.

Spin canting and slow magnetic relaxation in mononuclear cobalt(II) sulfadiazine ternary complexes.

Monomeric [Co(SDZ)2phen] (1) and [Co(SDZ)(bq)Cl] (2) complexes (SDZ = sulfadiazine, phen = 1,10-phenanthroline, and bq = 2,2'-biquinoline) have been synthesized and characterized. X-ray diffraction studies indicate that SDZ acts as a bidentate ligand coordinating through the sulfonamide and the pyrimidine N atoms in both compounds. In complex 1, the coordination sphere consists of two SDZ ligands and a bis-chelating phen ligand, giving rise to a CoN6 coordination sphere. On the other hand, 2 has a CoN4Cl core, with two N-atoms from SDZ and two from the bq ligand. Both compounds have been studied by dc and ac magnetometry and shown to display slow magnetic relaxation under an optimum external dc field (1 kOe) at low temperatures. Moreover, compound 2 displays long range magnetic ordering provided by spin-canted antiferromagnetism, which has been characterized by further field-dependent magnetic susceptibility measurements, FC/ZFC curves, hysteresis loops and frequency-independent ac curves. The signs of the calculated D parameters, positive in 1 and negative in 2, have been rationalized according to the two lowest-lying transitions in the orbital energy diagrams derived from ab initio ligand field theory (AILFT). In a subsequent attempt to reveal the possible hidden zero-field SMM behaviour, Ni(II)-based 3 and Co(II)-doped Ni(II)-based (with a Ni : Co ratio of 0.9 : 0.1) heterometallic compound 2Ni were synthesized.

Accessing metal-specific orbital interactions in C-H activation with resonant inelastic X-ray scattering.

Photochemically prepared transition-metal complexes are known to be effective at cleaving the strong C-H bonds of organic molecules in room temperature solutions. There is also ample theoretical evidence that the two-way, metal to ligand (MLCT) and ligand to metal (LMCT), charge-transfer between an incoming alkane C-H group and the transition metal is the decisive interaction in the C-H activation reaction. What is missing, however, are experimental methods to directly probe these interactions in order to reveal what determines reactivity of intermediates and the rate of the reaction. Here, using quantum chemical simulations we predict and propose future time-resolved valence-to-core resonant inelastic X-ray scattering (VtC-RIXS) experiments at the transition metal L-edge as a method to provide a full account of the evolution of metal-alkane interactions during transition-metal mediated C-H activation reactions. For the model system cyclopentadienyl rhodium dicarbonyl (CpRh(CO)2), we demonstrate, by simulating the VtC-RIXS signatures of key intermediates in the C-H activation pathway, how the Rh-centered valence-excited states accessible through VtC-RIXS directly reflect changes in donation and back-donation between the alkane C-H group and the transition metal as the reaction proceeds via those intermediates. We benchmark and validate our quantum chemical simulations against experimental steady-state measurements of CpRh(CO)2 and Rh(acac)(CO)2 (where acac is acetylacetonate). Our study constitutes the first step towards establishing VtC-RIXS as a new experimental observable for probing reactivity of C-H activation reactions. More generally, the study further motivates the use of time-resolved VtC-RIXS to follow the valence electronic structure evolution along photochemical, photoinitiated and photocatalytic reactions with transition metal complexes.

High-pressure stabilization of open-shell bromine fluorides.

Halogen fluorides are textbook examples of how fundamental chemical concepts, such as molecular orbital theory or the valence-shell electron-repulsion (VSEPR) model, can be used to understand the geometry and properties of compounds. However, it is still an open question whether these notions are applicable to matter subject to high pressure (>1 GPa). In an attempt to gain insight into this phenomenon, we present a computational study on the phase transitions and reactivity of bromine fluorides at pressures of up to 100 GPa (≈106 atm). We predict that at a moderately high pressure of 15 GPa, the bonding preference in the Br/F system should change considerably with BrF3 becoming thermodynamically unstable and two novel compounds emerging as stable species: BrF2 and BrF6. Calculations indicate that both these compounds contain radical molecules while being non-metallic. We propose a synthetic route for obtaining BrF2 which does not require the use of highly reactive elemental fluorine. Finally, we show how molecular orbital diagrams and the VSEPR model can be used to explain the properties of compressed bromine fluorides.

EFEKTIFITAS METODE PICTURE AND PICTURE UNTUK MENINGKATKAN HASIL BELAJAR KIMIA MATERI KONFIGURASI ELEKTRON DAN DIAGRAM ORBITAL PADA SISWA KELAS X IPA 6 MAN 2 PALU

The purpose of this study was to determine the increase in learning outcomes of chemistry learning materials electron configurations and orbital diagrams in class X IPA 6 MAN 2 Palu City using the picture and picture method. The type of research used is classroom action research using test techniques as a data collection method. Data analysis used descriptive analysis. The results of the study revealed that the application of the picture and picture method in chemistry lessons on configuration materials and orbital diagrams could improve the learning achievement of students in class X IPA 6 MAN 2 Palu City. The learning outcomes are evidenced by the increase in the average value of student learning outcomes in each cycle. In the pre-cycle, the average learning score of students was 58.33 from a total of 36 students with 13 students who completed. In the first cycle, the number of students completed was 21 out of a total of 36 students or 68.89. This increase continued in the second cycle with the number of students reaching 30 students out of a total of 36 or 80.83. Also occurred in the percentage of minimum completeness criteria increased from 36.11% in the pre-cycle to 58.33% in the first cycle and increased to 83.33% in the second cycle.

Low energy electron induced chemistry for e-bromine molecule scattering

The present study focuses on electron collision with bromine molecule, employing ab-initio scattering calculations. Using the R-matrix method, we calculated elastic and inelastic cross-sections using two different scattering models: static exchange with polarization and close-coupling. Our findings reveal total three low energy resonances for e-Br2 scattering which are primarily formed through transient negative ions. This observation is supported by dissociative electron attachment cross-section analysis, potential energy curves, and molecular orbital diagrams. Out of these three, first is at zero-energy, the electron attachment is recognized as shape-resonance and further two π* resonances as core-excited resonances. Present computation becomes more important as many cross-sections are reported as bench mark results in absence of any reported data. For instance: elastic, differential, momentum transfer, excitation and total cross-section. Comparing our results with sparse existing literature, we find good agreement.

Cooperative Dinitrogen Activation: Identifying the Push‐Pull Effects of Transition Metals and Lewis Acids in Molecular Orbital Diagrams

AbstractThe sustainable fixation of atmospheric N2 and its conversion into industrially relevant molecules is one of the major current challenges in chemistry. Besides nitrogen activation with transition metal complexes, a “push‐pull” approach that fine‐tunes electron density along the N−N bond has shown success recently. The “pushing” is performed by an electron rich entity such as a transition metal complex, and the “pulling” is achieved with an electron acceptor such as a Lewis acid. In this contribution, we explore the electronic structure implications of this approach using the complex trans‐[ReICl(N2)(PMe2Ph)4] as a starting point. We show that borane Lewis acids exert a pull‐effect of increasing strength with increased Lewis acidity via a π‐pathway. Furthermore, the ligand trans to dinitrogen can weaken the dinitrogen bond via a σ‐pathway. Binding a strong Lewis acid is found to have electronic structure effects potentially relevant for electrochemistry: dinitrogen‐dominated molecular orbitals are shifted into advantageous energetic positions for redox activation of the dinitrogen bond. We show how these electronic structure design principles are rooted in cooperative effects of a transition metal complex and a Lewis acid, and that they can be exploited to tailor a complex towards the desired thermal, electrochemical or photochemical reactivity.

Mechanism of Nitrogen Reduction to Ammonia in a Diiron Model of Nitrogenase.

Nitrogenase is a fascinating enzyme in biology that reduces dinitrogen from air to ammonia through stepwise reduction and protonation. Despite it being studied in detail by experimental and computational groups, there are still many unknown factors in the catalytic cycle of nitrogenase, especially related to the addition of protons and electrons and their order. A recent biomimetic study characterized a potential dinitrogen-bridged diiron cluster as a synthetic model of nitrogenase. Using strong acid and reductants, the dinitrogen was converted into ammonia molecules, but details of the mechanism remains unknown. In particular, it was unclear from the experimental studies whether the proton and electron transfer steps are sequential or alternating. Moreover, the work failed to establish what the function of the diiron core is and whether it split into mononuclear iron fragments during the reaction. To understand the structure and reactivity of the biomimetic dinitrogen-bridged diiron complex [(P2P'PhFeH)2(μ-N2)] with triphenylphosphine ligands, we performed a density functional theory study. Our computational methods were validated against experimental crystal structure coordinates, Mössbauer parameters, and vibrational frequencies and show excellent agreement. Subsequently, we investigated the alternating and consecutive addition of electrons and protons to the system. The calculations identify a number of possible reaction channels, namely, same-site protonation, alternating protonation, and complex dissociation into mononuclear iron centers. The calculations show that the overall mechanism is not a pure sequential set of electron and proton transfers but a mixture of alternating and consecutive steps. In particular, the first reaction steps will start with double proton transfer followed by an electron transfer, while thereafter, there is another proton transfer and a second electron transfer to give a complex whereby ammonia can split off with a low energetic barrier. The second channel starts with alternating protonation of the two nitrogen atoms, whereafter the initial double proton transfer, electrons and protons are added sequentially to form a hydrazine-bound complex. The latter split off ammonia spontaneously after further protonation. The various reaction channels are analyzed with valence bond and orbital diagrams. We anticipate the nitrogenase enzyme to operate with mixed alternating and consecutive protonation and electron transfer steps.

Orbital Fulde-Ferrell-Larkin-Ovchinnikov state in an Ising superconductor.

In superconductors possessing both time and inversion symmetries, the Zeeman effect of an external magnetic field can break the time-reversal symmetry, forming a conventional Fulde-Ferrell-Larkin-Ovchinnikov (FFLO) state characterized by Cooper pairings with finite momentum1,2. In superconductors lacking (local)inversion symmetry, the Zeeman effect may still act as the underlying mechanism of FFLO states by interacting with spin-orbit coupling (SOC). Specifically, the interplay between the Zeeman effect and Rashba SOC can lead to the formation of more accessible Rashba FFLO states that cover broader regions in the phase diagram3-5. However, when the Zeeman effect is suppressed because of spin locking in the presence of Ising-type SOC, the conventional FFLO scenarios are no longer effective. Instead, an unconventional FFLO state is formed by coupling the orbital effect of magnetic fields with SOC, providing an alternative mechanism in superconductors with broken inversion symmetries6-8. Here we report the discovery of such an orbital FFLO state in the multilayer Ising superconductor 2H-NbSe2. Transport measurements show that the translational and rotational symmetries are broken in the orbital FFLO state, providing the hallmark signatures of finite-momentum Cooper pairings. We establish the entire orbital FFLO phase diagram, consisting of a normal metal, a uniform Ising superconducting phase and a six-fold orbital FFLO state. This study highlights an alternative route to achieving finite-momentum superconductivity and provides a universal mechanism to preparing orbital FFLO states in similar materials with broken inversion symmetries.

The stability and reactivity of neutral and charged aluminium doped carbon clusters (Al1,2C2-70,±)

The stability and reactivity of Al-doped linear and quasi-linear carbon chains (Al1,2C2-70,±) were computationally investigated using various reaction and binding energy parameters. The dissociation of the clusters was studied via the elimination of Al, C from the neutral species, Al0,+, C0,+ the cationic species, and Al0,-, C0,- from the anionic species. The stability was further examined based on electron elimination reactions, such as electron detachment from Al1,2C2-7- and ionization of Al1,2C2-7. The study proceeded by formulating a novel relative energy parameter, which was generated from the binding energy values. The lowest energy dissociation channels of Al1,2C1-70,± were the Al and Al+ elimination from the neutral/anionic and cationic clusters, respectively. Under the dissociation conditions, the even-carbon species (m = 2,4,6) AlCm (doublet), AlCm+ (triplet), AlCm- (singlet), Al2Cm (singlet), Al2Cm+ (doublet) were found to be more stable than that of the odd-carbon clusters (m = 3,5,7), irrespective of the spin states. In the case of Al2Cm-, the odd carbon clusters were found to be more stable. The stability orders based on the widely used highly endothermic C-elimination reaction were found to be significantly different. We have systematically addressed the above disparities and have commented on how to accurately predict the abundance of the species under extreme experimental conditions. The reactivity of Al1,2-doped clusters was found to be higher than the bare carbon chains. Based on the bond-strength parameters calculated using AIM analysis, the Al1,2-doping led to an activated Al-C bond rather than the carbon chains, eventually resulting in reactive meal-carbon clusters. The Al-C bonding was discussed using electron density at the Al-C bond critical points (ρAl-C), the vibrational frequency of the Al-C bond (νAl-C), bond length (rAl-C), the NBO charge on the Al atoms (qAl) and with the molecular orbital diagrams. The results of the current investigations can be highly relevant to astrochemistry, spectroscopy, material, and organometallic chemistry communities.

Analysis of boronic acids containing amino ferrocene by DFT approach and in silico studies

The synthesized (2)-(6) complexes and (2′)-(6′) hypothetical complexes formed by attached boranic acid esters were optimized at the DFT-B3LYP/GEN level. The structural and spectroscopic properties (IR, 1HNMR , 13CNMR ) of the optimized complex structures were calculated and the complexes were characterized. Molecular orbital energy diagrams and some molecular properties of the complexes were calculated. Some quantum chemical parameters were calculated for the biological activities of the complexes. It was predicted that complexes with diboranic acid ester had higher biological abilities. They were docked against Burkitt's lymphoma (BL) cell line for their anticancer activities and similar trend was obtained with quantum chemical parameters. NLO and OLED properties were examined to evaluate the electronic properties of the complexes. These properties of the complexes were found to be advantageous over the related reference materials.