Optoacoustic Signal Research Articles

Tuning the photophysical properties of cyanine by barbiturate functionalization and nanoformulation for efficient optoacoustics- guided phototherapy

Cyanine derivatives are organic dyes widely used for optical imaging. However, their potential in longitudinal optoacoustic imaging and photothermal therapy remains limited due to challenges such as poor chemical stability, poor photostability, and low photothermal conversion. In this study, we present a new structural modification for cyanine dyes by introducing a strongly electron-withdrawing group (barbiturate), resulting in a new series of barbiturate-cyanine dyes (BC810, BC885, and BC1010) with suppressed fluorescence and enhanced stability. Furthermore, the introduction of BC1010 into block copolymers (PEG114-b-PCL60) induces aggregation-caused quenching, further boosting the photothermal performance. The photophysical properties of nanoparticles (BC1010-NPs) include their remarkably broad absorption range from 900 to 1200 nm for optoacoustic imaging, allowing imaging applications in NIR-I and NIR-II windows. The combined effect of these strategies, including improved photostability, enhanced nonradiative relaxation, and aggregation-caused quenching, enables the detection of optoacoustic signals with high sensitivity and effective photothermal treatment of in vivo tumor models when BC1010-NPs are administered before irradiation with a 1064 nm laser. This research introduces a barbiturate-functionalized cyanine derivative with optimal properties for efficient optoacoustics-guided theranostic applications. This new compound holds significant potential for biomedical use, facilitating advancements in optoacoustic-guided diagnostic and therapeutic approaches.

Microneedle System with Biomarker-Activatable Chromophore as Both Optical Imaging Probe and Anti-bacterial Agent for Combination Therapy of Bacterial-Infected Wounds and Outcome Monitoring.

Wounds infected with bacteria, if left untreated, have the potential to escalate into life-threatening conditions, such as sepsis, which is characterized by widespread inflammation and organ damage. A comprehensive approach to treating bacterial-infected wounds, encompassing the control of bacterial infection, biofilm eradication, and inflammation regulation, holds significant importance. Herein, a microneedle (MN) patch (FM@ST MN) has been developed, with silk fibroin (SF) and tannic acid-based hydrogel serving as the matrix. Encapsulated within the MNs are the AIEgen-based activatable probe (FQ-H2O2) and the NLRP3 inhibitor MCC950, serving as the optical reporter/antibacterial agent and the inflammation regulator, respectively. When applied onto bacterial-infected wounds, the MNs in FM@ST MN penetrate bacterial biofilms and gradually degrade, releasing FQ-H2O2 and MCC950. The released FQ-H2O2 responds to endogenously overexpressed reactive oxygen species (H2O2) at the wound site, generating a chromophore FQ-OH which emits noticeable NIR-II fluorescence and optoacoustic signals, enabling real-time imaging for outcome monitoring; and this chromophore also exhibits potent antibacterial capability due to its dual positive charges and shows negligible antibacterial resistance. However, the NLRP3 inhibitor MCC950, upon release, suppresses the activation of NLRP3 inflammasomes, thereby mitigating the inflammation triggered by bacterial infections and facilitating wound healing. Furthermore, SF in FM@ST MN aids in tissue repair and regeneration by promoting the proliferation of epidermal cells and fibroblasts and collagen synthesis. This MN system, free from antibiotics, holds promise as a solution for treating and monitoring bacterially infected wounds without the associated risk of antimicrobial resistance.

Non-invasive measurements of blood glucose levels by time-gating mid-infrared optoacoustic signals

Non-invasive glucose monitoring (NIGM) represents an attractive alternative to finger pricking for blood glucose assessment and management of diabetes. Nevertheless, current NIGM techniques do not measure glucose concentrations in blood but rely on indirect bulk measurement of glucose in interstitial fluid, where glucose is diluted and glucose dynamics are different from those in the blood, which impairs NIGM accuracy. Here we introduce a new biosensor, termed depth-gated mid-infrared optoacoustic sensor (DIROS), which allows, for the first time, non-invasive glucose detection in blood-rich volumes in the skin. DIROS minimizes interference caused by the stratum corneum and other superficial skin layers by time-gating mid-infrared optoacoustic signals to enable depth-selective localization of glucose readings in skin. In measurements on the ears of (female) mice, DIROS displays improved accuracy over bulk-tissue glucose measurements. Our work demonstrates how signal localization can improve NIGM accuracy and positions DIROS as a holistic approach, with high translational potential, that addresses a key limitation of current NIGM methods.

Monitoring spinal muscular atrophy with three-dimensional optoacoustic imaging

Spinal muscular atrophy is a progressive neuromuscular disorder and among the most frequent genetic causes of infant mortality. While recent advancements in gene therapy provide the potential to ameliorate the disease severity, there is currently no modality in clinical use to visualize dynamic pathophysiological changes in disease progression and regression after therapy. In this prospective diagnostic clinical study, ten pediatric patients with spinal muscular atrophy and ten age- and sex-matched controls have been examined with three-dimensional optoacoustic imaging and clinical standard examinations to compare the spectral profile of muscle tissue and correlate it with motor function (ClinicalTrials.gov: NCT04115475). We observed a reduced optoacoustic signal in muscle tissue of pediatric patients with spinal muscular atrophy. The reduction in signal intensity correlated with disease severity as assessed by grayscale ultrasound and standard motor function tests. In a cohort of patients who received disease-modifying therapy prior to the study, the optoacoustic signal intensity was similar to healthy controls. This translational study provides early evidence that three-dimensional optoacoustic imaging could have clinical implications in monitoring disease activity in spinal muscular atrophy. By visualizing and quantifying molecular changes in muscle tissue, disease progression and effects of gene therapy can be assessed in real time. The project was funded by ELAN Fonds (P055) at the University Hospital of the Friedrich-Alexander-Universität (FAU) Erlangen-Nurnberg to A.P.R.

Abstract 4165: Influence of halogens in squaraine dye on optoacoustic signal

Abstract Optoacoustic imaging has grown in clinical relevance due to inherent advantages in sensitivity, resolution, and contrast, compared to standard modalities, such as fluorescence. However, guiding principles for development of small molecule contrast agents specific for optoacoustic imaging is lacking. This study assesses the influence of specific structural features of small molecule dyes, specifically squaraine dyes, that result in optoacoustic activity. Through computational models, in vitro testing, and in vivo experimentation this study assesses the effects of halogens on small molecule squaraine dyes to increase optoacoustic signal. By using the aid of our computational model, we decorated the squaraine scaffold with heavy halogenation of squaraines increased optoacoustic activity (2.12 a.u. vs. 0.21 a.u., p<0.001). Density functional theory models suggest the origin of increased optoacoustic signal is due to increases in transition dipole moment which manifested experimentally as increased absorbance in the NIR wavelength range and decreased fluorescence quantum yield, respectively. This study provides an insight into the structure-function relationships that lead to guiding principles for designing optoacoustic-specific contrast agents. Further developments of squaraines and other types of optoacoustic agents will further increase relevance of optoacoustic imaging in a clinical setting. Citation Format: Kavita Belligund, William MacCuaig, Carly Wickizer, Yihan Shao, Lacey R. McNally. Influence of halogens in squaraine dye on optoacoustic signal [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2024; Part 1 (Regular Abstracts); 2024 Apr 5-10; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2024;84(6_Suppl):Abstract nr 4165.

A Method to Obtain the Transducers Impulse Response (TIR) in Photoacoustic Imaging

Photoacoustic tomography (PAT) is an emerging imaging technique with great potential for a wide range of biomedical imaging applications. The transducers impulse response (TIR) is a key factor affecting the performance of photoacoustic imaging (PAI). It is customary in PAI to assume that TIR is known or obtain it from experiments. In this paper, we investigate the possibility of obtaining TIR in another way. A new method is proposed to extract TIR from observed optoacoustic signal (OPAS) data, without prior knowledge, as a known condition. It is based on the relation between the OPAS data and the photoacoustic pressure signal (PAPS) at transducer positions. The relation can be expressed as a homogeneous linear equation. The TIR is solved by solving the homogeneous equation. The numerical test verifies the effectiveness of the presented method. This article also discusses the effect of calculation parameters on the extracting precision of TIR.

Influence of structural moieties in squaraine dyes on optoacoustic signal shape and intensity

Optoacoustic imaging has grown in clinical relevance due to inherent advantages in sensitivity, resolution, and imaging depth, but the development of contrast agents is lacking. This study assesses the influence of structural features of squaraine dyes on optoacoustic activity through computational models, in vitro testing, and in vivo experimentation. The squaraine scaffold was decorated with halogens and side-chain extensions. Extension of side chains and heavy halogenation of squaraines both increased optoacoustic signals individually, although they had a more significant effect in tandem. Density functional theory models suggest that the origin of the increased optoacoustic signal is the increase in transition dipole moment and vibrational entropy, which manifested as increased absorbance in near-infrared region (NIR) wavelengths and decreased fluorescence quantum yield. This study provides insight into the structure-function relationships that will lead guiding principles for optimizing optoacoustic contrast agents. Further developments of squaraines and other agents will further increase the relevance of optoacoustic imaging in a clinical setting.

Multi-Scale Volumetric Dynamic Optoacoustic and Laser Ultrasound (OPLUS) Imaging Enabled by Semi-Transparent Optical Guidance.

Major biological discoveries are made by interrogating living organisms with light. However, the limited penetration of un-scattered photons within biological tissues limits the depth range covered by optical methods. Deep-tissue imaging is achieved by combining light and ultrasound. Optoacoustic imaging exploits the optical generation of ultrasound to render high-resolution images at depths unattainable with optical microscopy. Recently, laser ultrasound has been suggested as a means of generating broadband acoustic waves for high-resolution pulse-echo ultrasound imaging. Herein, an approach is proposed to simultaneously interrogate biological tissues with light and ultrasound based on layer-by-layer coating of silica optical fibers with a controlled degree of transparency. The time separation between optoacoustic and ultrasound signals collected with a custom-made spherical array transducer is exploited for simultaneous 3D optoacoustic and laser ultrasound (OPLUS) imaging with a single laser pulse. OPLUS is shown to enable large-scale anatomical characterization of tissues along with functional multi-spectral imaging of chromophores and assessment of cardiac dynamics at ultrafast rates only limited by the pulse repetition frequency of the laser. The suggested approach provides a flexible and scalable means for developing a new generation of systems synergistically combining the powerful capabilities of optoacoustics and ultrasound imaging in biology and medicine.

Optoacoustic classification of diabetes mellitus with the synthetic impacts via optimized neural networks

A highly accurate classification of diabetes mellitus (DM) with the synthetic impacts of several variables is first studied via optoacoustic technology in this work. For this purpose, an optoacoustic measurement apparatus of blood glucose is built, and the optoacoustic signals and peak–peak values for 625 cases of in vitro rabbit blood are obtained. The results show that although the single impact of five variables are obtained, the precise classification of DM is limited because of the synthetic impacts. Based on clinical standards, different levels of blood glucose corresponding to hypoglycaemia, normal, slight diabetes, moderate diabetes and severe diabetes are employed. Then, a wavelet neural network (WNN) is utilized to establish a classification model of DM severity. The classification accuracy is 94.4 % for the testing blood samples. To enhance the classification accuracy, particle swarm optimization (PSO) and quantum-behaved particle swarm optimization (QPSO) are successively utilized to optimize WNN, and accuracy is enhanced to 98.4 % and 100 %, respectively. It is demonstrated from comparison between several algorithms that optoacoustic technology united with the QPSO-optimized WNN algorithm can achieve precise classification of DM with synthetic impacts.

Squaraine nanoparticles for optoacoustic imaging-guided synergistic cancer phototherapy

Abstract The unique optical properties of squaraine dyes make them promising for cancer phototheranostics, but the reported squaraines for in vivo treatments mainly rely on their photothermal effect, where monotherapy cannot achieve the desired therapeutic effect. Here we generated a type of squaraine capable of killing tumors through both photothermal and photodynamic effects. We optimized squaraine structure with selenium modulation and formulated it into nanoparticles that showed strong absorption of infrared light, negligible fluorescence, good photothermal conversion (66.6 %), and strong photodynamic effects even after several irradiation cycles. In addition, the nanoparticles could be tracked through their strong optoacoustic signal. In mice, the nanoparticles effectively accumulated in tumors and eliminated them upon irradiation, without causing adverse effects. Our work demonstrates the potential of selenium modulation of squaraine for precise cancer diagnosis and treatment through synergistic photothermal and photodynamic effects.

Full-view LED-based optoacoustic tomography

Optoacoustic tomography is commonly performed with bulky and expensive short-pulsed solid-state lasers providing high per-pulse energies in the millijoule range. Light emitting diodes (LEDs) represent a cost-effective and portable alternative for optoacoustic signal excitation that can additionally provide excellent pulse-to-pulse stability. Herein, we introduce a full-view LED-based optoacoustic tomography (FLOAT) system for deep tissue in vivo imaging. It is based on a custom-made electronic unit driving a stacked array of LEDs, which attains 100 ns pulse width and highly stable (0.62 % standard deviation) total per-pulse energy of 0.48 mJ. The illumination source is integrated into a circular array of cylindrically-focused ultrasound detection elements to result in a full-view tomographic configuration, which plays a critical role in circumventing limited-view effects, enhancing the effective field-of-view and image quality for cross-sectional (2D) imaging. We characterized the FLOAT performance in terms of pulse width, power stability, excitation light distribution, signal-to-noise and penetration depth. FLOAT of the human finger revealed a comparable imaging performance to that achieved with the standard pulsed Nd:YAG laser. It is anticipated that this compact, affordable and versatile illumination technology will facilitate optoacoustic imaging developments in resource-limited settings for biological and clinical applications.

Real-time assessment of high-intensity focused ultrasound heating and cavitation with hybrid optoacoustic ultrasound imaging

High-intensity focused ultrasound (HIFU) enables localized ablation of biological tissues by capitalizing on the synergistic effects of heating and cavitation. Monitoring of those effects is essential for improving the efficacy and safety of HIFU interventions. Herein, we suggest a hybrid optoacoustic-ultrasound (OPUS) approach for real-time assessment of heating and cavitation processes while providing an essential anatomical reference for accurate localization of the HIFU-induced lesion. Both effects could clearly be observed by exploiting the temperature dependence of optoacoustic (OA) signals and the strong contrast of gas bubbles in pulse-echo ultrasound (US) images. The differences in temperature increase and its rate, as recorded with a thermal camera for different HIFU pressures, evinced the onset of cavitation at the expected pressure threshold. The estimated temperatures based on OA signal variations were also within 10–20 % agreement with the camera readings for temperatures below the coagulation threshold (∼50 °C). Experiments performed in excised tissues as well as in a post-mortem mouse demonstrate that both heating and cavitation effects can be effectively visualized and tracked using the OPUS approach. The good sensitivity of the suggested method for HIFU monitoring purposes was manifested by a significant increase in contrast-to-noise ratio within the ablated region by > 10 dB and > 5 dB for the OA and US images, respectively. The hybrid OPUS-based monitoring approach offers the ease of handheld operation thus can readily be implemented in a bedside setting to benefit several types of HIFU treatments used in the clinics.

Simultaneous Detection of Multiple Tumor-targeted Gold Nanoparticles in HER2-Positive Breast Tumors Using Optoacoustic Imaging.

Purpose To develop optoacoustic, spectrally distinct, actively targeted gold nanoparticle-based near-infrared probes (trastuzumab [TRA], TRA-Aurelia-1, and TRA-Aurelia-2) that can be individually identifiable at multispectral optoacoustic tomography (MSOT) of human epidermal growth factor receptor 2 (HER2)-positive breast tumors. Materials and Methods Gold nanoparticle-based near-infrared probes (Aurelia-1 and 2) that are optoacoustically active and spectrally distinct for simultaneous MSOT imaging were synthesized and conjugated to TRA to produce TRA-Aurelia-1 and 2. Freshly resected human HER2-positive (n = 6) and HER2-negative (n = 6) triple-negative breast cancer tumors were treated with TRA-Aurelia-1 and TRA-Aurelia-2 for 2 hours and imaged with MSOT. HER2-expressing DY36T2Q cells and HER2-negative MDA-MB-231 cells were implanted orthotopically into mice (n = 5). MSOT imaging was performed 6 hours following the injection, and the Friedman test was used for analysis. Results TRA-Aurelia-1 (absorption peak, 780 nm) and TRA-Aurelia-2 (absorption peak, 720 nm) were spectrally distinct. HER2-positive human breast tumors exhibited a significant increase in optoacoustic signal following TRA-Aurelia-1 (28.8-fold) or 2 (29.5-fold) (P = .002) treatment relative to HER2-negative tumors. Treatment with TRA-Aurelia-1 and 2 increased optoacoustic signals in DY36T2Q tumors relative to those in MDA-MB-231 controls (14.8-fold, P < .001; 20.8-fold, P < .001, respectively). Conclusion The study demonstrates that TRA-Aurelia 1 and 2 nanoparticles operate as a spectrally distinct HER2 breast tumor-targeted in vivo optoacoustic agent. Keywords: Molecular Imaging, Nanoparticles, Photoacoustic Imaging, Breast Cancer Supplemental material is available for this article. © RSNA, 2023.

Optoacoustic quantitative in vitro detection of diabetes mellitus involving the comprehensive impacts based on improved quantum particle swarm optimized wavelet neural network

The high accurate detection of blood glucose level (BGL) is very important for non-invasive monitoring of diabetes mellitus. In this work, the optoacoustic (OA) quantitative in vitro detection of diabetes mellitus involving the comprehensive impacts of multiple factors (irradiation energy, concentration, temperature, flow rate and vessel depth) was firstly studied. To achieve this aim, a set of OA in vitro detection system of blood glucose with the comprehensive influence of five factors was constructed. The real-time OA signals of 625 rabbit whole blood were obtained at the characteristic wavelength of 750 nm, as well as peak-to-peak values (PPVs). Results show that the accurate detection of BGL was very difficult due to the complicated OA signals. To accurately predict the BGL under the comprehensive impacts of five factors, wavelet neural network (WNN) was employed to train BGL of 500 training set blood. The mean square error (MSE) of BGL for 125 testing set blood was 6.5782 mmol/L. To decrease the MSE, WNN optimized by quantum particle swarm optimization (QPSO), i.e., QPSO-WNN algorithm was utilized. The MSE of BGL based on QPSO-WNN was 0.37485 mmol/L, which was superior to 0.48005 mmol/L of PSO-WNN. Particularly, to further decrease MSE, a novel nonlinear dynamic shrinkage coefficient (DSC) strategy was proposed, and compared with other four kinds of DSC strategies and the fixed one. With the optimal parameters, the MSE of BGL was decreased to 0.3088 mmol/L. Comparison results of seven algorithms and research works demonstrate that OA technology combined with QPSO-WNN algorithm and the novel nonlinear DSC strategy has excellent performance in the quantitative detection of diabetes mellitus involving in the comprehensive impacts.

Renal-Clearable Probe with Water Solubility and Photostability for Biomarker-Activatable Detection of Acute Kidney Injuries via NIR-II Fluorescence and Optoacoustic Imaging.

Acute kidney injuries (AKI) have serious short-term or long-term complications with high morbidity and mortality rate, thus posing great health threats. Developing high-performance NIR-II probes for noninvasive in situ detection of AKI via NIR-II fluorescent and optoacoustic dual-mode imaging is of great significance. Yet NIR-II chromophores often feature long conjugation and hydrophobicity, which prevent them from being renal clearable, thus limiting their applications in the detection and imaging of kidney diseases. To fully exploit the advantageous features of heptamethine cyanine dye, while overcoming its relatively poor photostability, and to strive to design a NIR-II probe for the detection and imaging of AKI with dual-mode imaging, herein, we have developed the probe PEG3-HC-PB, which is renal clearable, water soluble, and biomarker activatable and has good photostability. As for the probe, its fluorescence (900-1200 nm) is quenched due to the existence of the electron-pulling phenylboronic group (responsive element), and it exhibits weak absorption with a peak at 830 nm. Meanwhile, in the presence of the overexpressed H2O2 in the renal region in the case of AKI, the phenylboronic group is converted to the phenylhydroxy group, which enhances NIR-II fluorescent emission (900-1200 nm) and absorption (600-900 nm) and eventually produces conspicuous optoacoustic signals and NIR-II fluorescent emission for imaging. This probe enables detection of contrast-agent-induced and ischemia/reperfusion-induced AKI in mice using real-time 3D-MSOT and NIR-II fluorescent dual-mode imaging via response to the biomarker H2O2. Hence, this probe can be used as a practicable tool for detecting AKI; additionally, its design strategy could provide insight into the design of other large-conjugation NIR-II probes with multifarious biological applications.

Multispectral optoacoustic tomography of the human intestine – temporal precision and the influence of postprandial gastrointestinal blood flow

Multispectral optoacoustic tomography (MSOT) holds great promise as a non-invasive diagnostic tool for inflammatory bowel diseases. Yet, reliability and the impact of physiological processes during fasting and after food intake on optoacoustic signals have not been studied. In the present investigator initiated trial (NCT05160077) the intestines of ten healthy subjects were examined by MSOT at eight timepoints on two days, one fasting and one after food intake. While within-timepoint and within-day reproducibility were good for single wavelength 800 nm and total hemoglobin (ICC 0.722 to 0.956), between-day reproducibility was inferior (ICC −0.137 to 0.438). However, temporal variability was smaller than variation between individuals (coefficients of variation 8.9% − 33.7% vs. 17.0% − 48.5%). After food intake and consecutive increased intestinal circulation, indicated by reduced resistance index of simultaneous Doppler ultrasound, optoacoustic signals did not alter significantly. In summary, this study demonstrates high reliability and temporal stability of MSOT for imaging the human intestine during fasting and after food intake.

A biomarker-responsive nanoprobe for detecting hepatic ischemia-reperfusion injury via optoacoustic/NIR-II fluorescence imaging.

A nanoprobe for detecting hepatic ischemia-reperfusion injury has been developed. Apparent optoacoustic and NIR-II fluorescent signals are given out upon the nanoprobe's response to the in situ biomarker H2O2 in the liver in the case of ischemia-reperfusion injury.

Combined Monte Carlo and k-Wave Simulations for Reconstruction of Blood Oxygen Saturation in Optoacoustics: A Pilot Study

Optoacoustic (OA) imaging of biological tissues is a modern technique allowing for three-dimensional blood oxygen saturation mapping based on OA spectroscopy data. Since biological tissues are optically inhomogeneous and the spatial distribution of optical parameters within a biological tissue is a priori unknown, Monte Carlo simulation technique is traditionally used to estimate the distribution of probing illumination within tissues in quantitative OA reconstruction. Currently, machine learning techniques are actively employed for reconstructing 3D distribution of blood oxygen saturation or estimating optical properties of biological tissues based on training datasets. In this paper, systemic calculations of synthetic OA images of a medium with embedded vessel-like structures were performed to create a training dataset for machine learning employing combined application of the Monte Carlo technique for direct solution of optical problem and difference-space pseudo-spectral approach implemented through k-Wave Toolbox calculations for the acoustical part. The calculations were performed for probing wavelengths of 532 nm, 658 nm and 1064 nm, which are commonly employed in spectral OA imaging. Simulated OA data for different orientation, diameter and embedding depth of blood vessels allows analyzing the effect of these parameters on the formation of OA image and the reconstruction of blood oxygen saturation. The ratio of OA signals corresponding to probing wavelengths of 658 nm and 1064 nm was employed for simple reconstruction of blood oxygen saturation in silico for different vessel geometries with the precision of &lt; 3–15% for the most of blood vessels diameters and embedding depths and the range of blood oxygen saturation values ≥ 0.8. The obtained set of synthetic OA data has high potential as a training set for employment in machine learning techniques aiming at mapping blood oxygenation based on spectral OA data.

Model of the Influence of the Absorption Coefficient of the Medium at Various Concentrations of Glucose and Saturation Level on the Optoacoustic Signal in the Blood

Model of the Influence of the Absorption Coefficient of the Medium at Various Concentrations of Glucose and Saturation Level on the Optoacoustic Signal in the Blood

Silicon-photonics focused ultrasound detector for minimally invasive optoacoustic imaging.

One of the main challenges in miniaturizing optoacoustic technology is the low sensitivity of sub-millimeter piezoelectric ultrasound transducers, which is often insufficient for detecting weak optoacoustic signals. Optical detectors of ultrasound can achieve significantly higher sensitivities than their piezoelectric counterparts for a given sensing area but generally lack acoustic focusing, which is essential in many minimally invasive imaging configurations. In this work, we develop a focused sub-millimeter ultrasound detector composed of a silicon-photonics optical resonator and a micro-machined acoustic lens. The acoustic lens provides acoustic focusing, which, in addition to increasing the lateral resolution, also enhances the signal. The developed detector has a wide bandwidth of 84 MHz, a focal width smaller than 50 µm, and noise-equivalent pressure of 37 mPa/Hz1/2 - an order of magnitude improvement over conventional intravascular ultrasound. We show the feasibility of the approach and the detector's imaging capabilities by performing high-resolution optoacoustic microscopy of optical phantoms with complex geometries.