Optimal Properties Research Articles

Advancing Green Hydrogen Production with Innovative Materials and Coatings

Green hydrogen is a vital solution for reducing greenhouse gas emissions in various sectors of the global economy. As proton exchange membrane (PEM) electrolyzer deployments scale to meet hydrogen production demands, it is critical that raw materials and coatings used in stack designs are carefully engineered for a balance of cost, efficiency, and durability. In this presentation, we will describe technical approaches to assist in the customization of porous transport layer (PTL) components for optimal properties such as mass transport, conductivity, and corrosion resistance. In particular, the design of expanded metal sheets as PTL flow-fields will be described. Computational fluid dynamics (CFD) modeling is used to predict key hydrodynamic properties and inform the engineering of these components. With a specific focus on scalable technologies that can achieve GW/y production volumes, we will demonstrate how PTL assemblies can be economically optimized for performance, under specific PEM electrolyzer form factors and operational conditions.

Doping Induced Enhancement of Activity and Stability for Oxygen Evolution Reaction with Isomaterially Heterostructured MnO2

A “Non-Native” phase (NNP) differs from the thermodynamically most stable bulk Native in its discrete translational symmetry. The relative difference in surface and bulk energy with respect to the native phase (NP)determines the stability of NNP. The isomaterial hetero-structured NP-NNP composite provides a pathway to assemble structures that have optimal properties of NNP and NP. The surface and sub-surface energies can also be modulated by doping as the dopants may segregate and stabilize grain boundaries. This study demonstrates that the isomaterial heterostructure of the NP, β-N MnO2, and Ramsdellite, r-NN1 MnO2, known as γ-N-NN1-MnO2 intergrowth, enhances the OER activity and stability.The hydrothermal route was used to synthesize isomaterial heterostructured γ/N-NN1-MnO2 with varying concentrations of dopants (10%, 15%, and 20% Ni and Co). X-ray diffraction was used to characterize the material, and after Rietveld refinement, phase quantification revealed that as the dopant concentration increased, the amount of the thermodynamically stable β-N MnO2 phase increased. Planes identified in XRD were also confirmed using high-resolution transmission electron microscopy (HRTEM) and the analysis of selective area electron diffraction (SAED) patterns. It appears that doping was successful based on the shifting of peaks in XRD and differences in unit cell volume and crystallite size calculated using the Debye-Scherrer equation before and after doping. With an increase in dopant concentration and thus improved OER activity, the average oxidation state as determined by X-ray photoelectron spectroscopy followed a downward trend, which is known to improve OER activity. The peaks shifted to lower frequency values as seen by Raman spectroscopy, which implies a weakening of Mn—O bond strength, indicating that dopants Ni and Co may have replaced part of the Mn atoms in the MnO2 intergrowth structure. Scanning electron microscopy (SEM) revealed spherical-shaped nanoparticles with spike-like overgrowths, which were further confirmed by HRTEM. The uniform dispersion of dopants was demonstrated by SEM and energy dispersive spectroscopy (EDS). Elemental quantification of the samples was done using EDS and scanning transmission electron microscopy (STEM). Using HRTEM, the presence of grain boundaries was confirmed.The study of dopants segregating to the grain boundary is conducted through DFT simulations. In many instances, the dopants actively contribute to the OER activity, except for the case of Ni in the NN1 sub-phase of the γ-N-NN1-MnO2 intergrowth, which is apparent by the slightly lower activity of Ni-doped samples compared to Co. This is because Ni remains in the bulk while Co segregates to the surface. A three-electrode setup (Ag/AgCl as the reference electrode, Pt mesh as the counter electrode, and catalyst as the working electrode) was used in 1M KOH to conduct electrochemical experiments. To achieve 10 mA/cm2, the 15% Co-doped electrocatalyst used the least amount of overpotential, 320 mV. According to electrochemical measurements and analysis, the doped samples show low Tafel slope, high specific activity, roughness factor, and charge transfer resistance from electrochemical impedance spectroscopy, all of which suggest improved overall activity for the oxygen evolution process (OER) for the doped over undoped samples. DFT simulations rationalize the enhancement of OER using the Bader charge analysis, the associated Gibbs free energy of the Sabatier principle plotted as the volcano plot.

Probiotics encapsulated by calcium pectin/chitosan-calcium pectin/sodium alginate-pectin-whey through biofilm-based microencapsulation strategy and their preventive effects on ulcerative colitis

Biofilm-based probiotics have emerged as a compelling approach for administering probiotics. Selecting appropriate wall materials for enclosing probiotics in biofilm structure is viewed as an advanced method of microencapsulation. In this study, Lactiplantibacillus paraplanturm LR-1 was enclosed in three different types of wall materials to create calcium pectin beads (CPB), chitosan-calcium pectin beads (C-CPB), and sodium alginate-pectin-whey beads (SPW). The biofilm cells of LR-1 were cultured externally and then encapsulated to create CPB-ex-LR-1, C-CPB-ex-LR-1 and SPW-ex-LR-1. In contrast, LR-1 was cultured within the microcapsules to form biofilms in situ, resulting in CPB-situ-LR-1, C-CPB-situ-LR-1 and SPW-situ-LR-1. The microcapsules displayed a relatively uniform morphology with the water contents below 10%. Nevertheless, there were noticeable edge effects in the distribution of strains within the in situ-type microcapsules. The detection of distinctive peaks unique to Lactiplantibacillus within the microcapsules confirmed the successful encapsulation. Additionally, a decrease in the intensity of the peaks linked to the wall materials indicated the formation of an amorphous structure within the microcapsules. The bacterial concentrations of situ-type microcapsules were found to surpass 10 lg CFU/g. The SPW-situ-LR-1 demonstrated superior tolerance performance, optimal release properties in simulated gastrointestinal fluids, and exceptional stability during the storage period. Additionally, SPW-situ-LR-1 showed similar effectiveness in alleviating colitis compared to fresh Biofilm-LR-1. Both Biofilm-LR-1 and SPW-situ-LR-1 pre-treatments exhibited positive effects on regulation, with SPW-situ-LR-1 administration significantly increasing the presence of Lactobacillus. This study provides valuable insights into the development of the next-generation probiotics.

Process optimization, interfacial characteristics, and mechanical properties of titanium-tantalum multi-material structures fabricated via laser powder bed fusion

To fully exploit the biomechanical properties of titanium (Ti) and biocompatibility of tantalum (Ta), Ti-Ta multi-material structures with different printing sequences were fabricated using laser powder bed fusion (LPBF). The interfacial characteristics, mechanical properties, formation mechanisms, and influence of process parameters on bonding strength at the Ti/Ta (Ta printed on Ti) and Ta/Ti (Ti printed on Ta) interfaces were investigated. At the Ti/Ta interface, a wide diffusion zone led to microstructure evolution along the building direction: coarsened lath α′ grain → refined α′ + β grains → columnar β + cellular β grains. This evolution was attributed to keyhole formation and differences in material density that promoted element diffusion. On the other hand, at the Ta/Ti interface with a narrow diffusion zone, direct microstructure evolution occurred from columnar β + cellular β grains to lath α′ grains due to limited solid-state diffusion and compromised element diffusion caused by gravity and heat dissipation. Optimal bonding strengths of 548.11 MPa and 285.42 MPa were achieved for the Ti/Ta and Ta/Ti interfaces, respectively. During LPBF processing of Ti-Ta multi-materials, reducing scanning speed significantly enhanced bonding strength, indicating its significant impact on interfacial bonding. These findings offer novel insights and references to fabricate Ti-Ta multi-material structures with great potential for biomedical implants through LPBF.

Multi-objective optimization, shrinkage and fracture properties of unsaturated polyester resin modified concrete for bridge deck pavement based on system theory

For the purpose of fabricating unsaturated polyester modified concrete (UPMC) with excellent shrinkage and fracture properties for bridge deck pavement, the optimization design of mix proportion and enhancement mechanism analysis were implemented based on system theory. Firstly, for unsaturated polyester resin (UPR) subsystem, the viscosity, mechanical properties and droplet-size distribution were analyzed to determine the types and dosage of auxiliary additives after emulsification treatment; Next, for UPMC mortar slave-system, the optimization design was implemented through the combination of experimental analysis and hybrid multi-attribute ellipsoidal decision of grey-target (HMEDG) model; Subsequently, for UPMC main-system, the optimal proportion was determined utilizing orthogonal design test. Finally, the variation law and enhancement mechanism on fracture properties and shrinkage characteristics of UPMC was analyzed by combining macroscopic test, thermogravimetry (TG) and X-ray diffraction (XRD). The results demonstrated that 2.0 wt%BPO+1.0 wt%DMA and meta-benzene types UPR were utilized as auxiliary additives for UPMC based on the results of HMEDG models. The demulsified and cured WUP might supplement the interior moisture losses based on humidity compensation, and substantially constrain the evaporation loss inside the matrix, upgrading the hydration degree and facilitating the generation of hydration products. The introduction of 3 %-6 % waterborne-UPR (WUP) would improve 28d-fracture toughness within approximately 23.33 %-49.32 %, and reduce the shrinkage deformation by roughly 28–43 % through inducing the crack tip stress redistribution against the initiation and propagation of interior microcracks and enhancing the homogenization and densification.

Multi-Criteria Decision-Making Approach for Pre-Synthesis Selection of the Optimal Physicochemical Properties of TiO2 Photocatalytic Nanoparticles for Biomedical and Environmental Applications.

Nanomaterials are widely used in several biomedical and environmental applications, due to their ideal properties. However, the synthetic and characterization procedure requires significant costs and has a negative environmental impact. Various methods are available in order to control the pre-synthesis design of the produced materials, predicting their behavior and minimizing the series of experiments. Multi-Criteria Decision-Making is proposed in this study in order to determine the best combination of the physicochemical parameters and to define the best alternative among fifteen different samples of nanostructured titanium dioxide. In particular, the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) method was applied to achieve a final ranking of the available alternatives by avoiding several of the trials that would follow testing the biological effect and the photocatalytic degradation of organic pollutants. Thus, this approach helps us to stay environmentally and ethically correct, saving time, money, and energy and also providing an optimization of the nanomaterials that are developed.

Biochar/Biopolymer Composites for Potential In Situ Groundwater Remediation.

This study explores the use of pine wood biochar (BC) waste gasified at 950 °C as fillers in polymer matrices to create BC@biopolymer composites with perspectives in groundwater remediation. Four biochar samples underwent different sieving and grinding processes and were extensively characterized via UV-Vis, FTIR, and FESEM-EDS, highlighting the fact that that BCs are essentially graphitic in nature with a sponge-like morphology. The grinding process influences the particle size, reducing the specific surface area by about 30% (evaluated by BET). The adsorption performances of raw BC were validated via an adsorption isotherm using trichloroethylene (TCE) as a model contaminant. A selected BC sample was used to produce hydrophilic, stable polymer composites with chitosan (CS), alginate (ALG), potato starch (PST), and sodium carboxymethylcellulose (CMC) via a simple blending approach. Pilot sedimentation tests over 7 days in water identified BC@PST and BC@CMC as the most stable suspensions due to a combination of both hydrogen bonds and physical entrapment, as studied by FTIR. BC@CMC showed optimal distribution and retention properties without clogging in breakthrough tests. The study concludes that biopolymer-based biochar composites with improved stability in aqueous environments hold significant promise for addressing various groundwater pollution challenges.

Fabricating coconut palm-based rigid polyurethane foam with enhanced compressive strength using biomass waste

The continued depletion of fossil fuels compels the exploitation of biomass as alternative. Herein, coconut palm, as a common tropical biomass, was first used to prepare polyether polyols via liquefaction method. The obtained polyether polyols were employed to fabricate rigid polyurethane foam (RPUF), which is widely applied in the industry. Moreover, the prepared RPUF was further modified by biomass waste including coconut shell (CS), coconut palm (CP), and seaweed (SE), with the contents of 5–15 wt%. The results showed that the addition of fillers can decrease the apparent densities and increase the compressive strength of the foams. The foam modified with 15 wt% CS exhibits the highest compressive strength with a value of 355 kPa and normalized value of 290 kPa among the prepared RPUF. In addition, an appropriate content of fillers can slightly increase the thermal stability of RPUF. The combustion performance test indicates that the introduction of fillers slightly increases the oxygen index value of coconut-based polyurethane, which produces less smoke than unmodified foam. Compared with the HRR of unmodified foam, the HRR of RPUF modified with CP are higher while those modified with SE are smaller. The foams modified with SE exhibit the optimal flame-retardant property. This work provides a novel and sustainable route to prepare and modify bio-based RPUF, which can furnish a clue to prepare bio-based RPUF with desirable performance.

Green valorization approach of Citrus limetta peels by ultrasound-assisted enzymatic extraction for recovery of dietary fibers: Optimization, physicochemical, structural, functional, and thermal properties

Green valorization approach of Citrus limetta peels by ultrasound-assisted enzymatic extraction for recovery of dietary fibers: Optimization, physicochemical, structural, functional, and thermal properties

Green synthesis and antibacterial-antibiofilm properties of biogenic silver nanoparticles

The biosynthesis of metallic nanoparticles is gaining prominence as an alternative to traditional physicochemical methods, offering several advantages such as simplicity, non-toxicity, lower energy requirements and short reaction times leading to environmentally sustainable processes. The aims of this work were: to study the extracellular biosynthesis of silver nanoparticles (AgNPs) by Pseudomonas extremaustralis 2E-UNGS, to characterise the shape, monodispersity and size of AgNPs, to explore their antimicrobial and antibiofilm activities, and to evaluate the role of nitrate reductase activity in the biosynthesis process. The novelty of this work relies on the development of a green and sustainable method for the synthesis of stable AgNPs with optimal properties for potential applications in antimicrobial materials, especially when incorporated into polymeric matrices or used as agrochemical substitutes. Optimal conditions for the biosynthesis of spherical AgNPs were determined to be pH 7, 38 °C, 4 h of darkness and 120 rpm using stationary phase culture supernatants of P. extremaustralis 2E-UNGS. The involvement of extracellular nitrate reductase in AgNP biosynthesis was confirmed by enzymatic assays and supported by bioinformatics analysis, which identified the presence of the napA2 gene linked to the nirBD cluster. Antimicrobial assays demonstrated the inhibitory effect of AgNPs against both Gram-positive and Gram-negative bacteria, including Pseudomonas aeruginosa PA01 in both planktonic and biofilm states. In addition, the potential application of AgNPs in innovative antibacterial polymers was explored by incorporating them into polyurethane matrices either alone (PU-AgNP) or in combination with crystal violet as a photosensitizer (PU-AgNP-CV). Subsequent inoculation with a clinical isolate of Pseudomonas aeruginosa resulted in significant reductions in viable bacterial counts on both PU-AgNP-CV and PU-AgNP. Biogenic AgNPs showed antibacterial and antibiofilm properties for new antimicrobial material development.

Mechanical and thermal properties of composite carbonized briquettes developed from cassava (Manihot esculenta) rhizomes and groundnut (Arachis hypogea. L.) stalks with jackfruit (Artocarpus heterophyllus) waste as binder

Composite briquettes from agricultural residues are a potential sustainable domestic solid fuel resource. This study aimed to develop and characterize composite briquettes developed from cassava rhizomes and groundnut stalks with jackfruit waste binder as an alternative sustainable fuel for domestic cooking applications. Cassava rhizomes and groundnuts stalks feedstock were carbonized in a step-down kiln under slow pyrolysis conditions at temperatures between 400 and 500 ℃. Thermogravimetric analysis was used to determine the proximate and thermal properties of the developed composite briquettes. Bomb calorimetry was used to determine their heating values. Relaxed density, drop strength and compressive strength results were used to determine the mechanical properties of the developed briquettes. Design of Experiments (Box Behnken design) was used to evaluate the effect of factors (biochar amount, jackfruit waste binder amount, and amount of water) on the mechanical and thermal properties of the developed composite briquettes. The Coats-Redfern kinetic model was used to determine the activation energy for the developed briquettes. Calorific values and drop strength of developed composite briquettes ranged from 18.1 to 24.0 MJ/kg and 92–99%, respectively. Combustion performance results indicated that ignition temperature increased from 155.1 to 184 ∘C\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^\\circ{\\rm C}$$\\end{document}, when heating rate was increased from 10 to 15 ∘C\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^\\circ{\\rm C}$$\\end{document}/min. However, burnout temperature decreased from 618.1 to 453 ∘C\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^\\circ{\\rm C}$$\\end{document}/min with a similar corresponding increase in heating rate. Optimum biochar amount, amount of water, and jackfruit waste binder amount for optimal mechanical and thermal properties were 89.3%, 893.0 ml, and 29.5 g, respectively. Composite briquettes developed from cassava rhizomes and groundnut stalks with jackfruit waste as binder are suitable potential domestic cooking fuels.

Inverse problem method application in building physics numerical optimization: new insight into ideal envelope properties determination

ABSTRACT Building thermal design optimization is pivotal for energy efficiency and built environment improvement. The optimal thermophysical properties for building walls remain ambiguous. This ambiguity stems from the constraints of traditional building physics, which: (1) disjoins the enhancement of wall thermal performance from the building service system management; and (2) relies on the forward method that fails to identify the ideal variable thermophysical property, the solution to which is inherently a function. This study elucidates the optimal temperature-dependent volumetric specific heat ( ρ c p ( t ) ) and thermal conductivity ( k ( t ) ) through the inverse problem and variation method. Illustrative example indicates that the optimal ρ c p ( t ) closely resembles a combination of two ‘ δ ’ functions, while the optimal k ( t ) mirrors a square wave function. Utilizing these ideal thermophysical properties, the building energy consumption can be significantly reduced by 77.1% with the optimized ρ c p ( t ) and 79.9% with the optimized k ( t ) . The ideal thermophysical properties for active buildings differ significantly from those recommended for passive buildings, underscoring that minimal energy consumption does not necessarily imply minimal discomfort. Therefore, the thermophysical properties of active and passive buildings should be optimized distinctly. This research offers valuable insights for defining ideal thermophysical properties of active building walls and construction materials.

Eco-friendly solid waste-based cementitious material containing a large amount of phosphogypsum: Performance optimization, micro-mechanisms, and environmental properties

Reusing phosphogypsum (PG) waste to manufacture eco-cementitious materials is sustainable. However, PG faces the challenge of high stacking volume and low utilization rate, and the low-content PG in eco-cementitious materials currently limits its large-scale potential application. This study provides a solution to use high-content PG to fabricate eco-friendly solid waste-based cementitious material (PBC), associated with ground granulated blast furnace slag (GGBS), fly ash (FA), and hydrated lime. Respond surface methodology (RSM) was undertaken to optimize and discuss the influence of independent design factors of GGBS, FA, and hydrated lime content on the unconfined compressive strength (UCS). Besides, the micro-mechanisms and environmental properties of PBC were also investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), and the leachate test. The results indicated that the optimal raw material contents were (by mass): 50.57% PG, 28% GGBS, 20% FA, and 1.43% hydrated lime. The UCS of the optimal PBC mixture is 23.57 MPa at 28 days, which was confirmed via experimental verification (24.65 MPa). Hence, the RSM is an effective method for optimizing PBC's UCS. The micro-mechanisms analysis shows that the ettringite is the primary hydration product within the reaction system of PBC, which is attributed to the substantial amount of PG. The leachate test results indicate that the fluoride ion concentration of the leaching solution of PBC remains below the PG, and the pH value falls within the range of 6–9. The leaching test results meet the Chinese environmental standard of GB 8978-1996. The cost and CO2 emission of the optimal PBC mixture could achieve a reduction of 71.25% and 99.98%, respectively, compared to Ordinary Portland cement (OPC). The findings of this study could serve as a theoretical foundation for the practical implementation of large-scale and efficient utilization of PG waste. The developed eco-friendly PBC has excellent potential to partially substitute conventional OPC binders and reduce engineering project costs.

Effect of synthesis conditions on mechanical properties and microstructure of coal gasification slag-based geopolymer

Coal gasification slag (CGS) is an industrial solid waste produced during coal gasification, and it is mostly deposited on the land at present, resulting in serious environmental pollution. In order to promote its resource utilization, geopolymer was synthesized from CGS in this study. The influence of important factors containing the water-solid ratio, alkali activator dosage, activator modulus and curing temperature on the mechanical properties and microstructure of geopolymers were investigated. Micromorphology, chemical composition, mineralogy and chemical bonding of the geopolymer were assessed by scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR), respectively. Results indicate that the compressive strength of geopolymer can be improved by reducing the amount of initial water. The optimal mechanical properties of geopolymer are obtained when the alkali activator dosage is 25 % and the activator modulus is 1. The moderate temperature (e.g. 60 °C) is the most favorable to the compressive strength development of geopolymer. Under these optimal conditions, the 90 days compressive strength of the CGS-based geopolymer (CGSG) can reach 58.3 MPa. The Si/Al molar ratio of the geopolymer gels is between 2.0 and 3.1, and the Al/Na molar ratio is around 1.0. These results can provide a reference for recycling of the CGS and production of eco-friendly building materials.

Effects of Enteromorpha prolifera sulfated polysaccharide and aluminium ion addition on the multifunctional property of conductive hydrogel for wearable strain sensing

Although introducing Enteromorpha prolifera sulfated polysaccharide (SPEP) enhances the mechanical properties of hydrogels significantly, little is known about the effects of polysaccharide and ion addition on morphological and physicochemical properties of conductive hydrogel. Therefore, the Poly (acrylic acid)/SPEPn/Al3+m (PAA/SPEPn/Al3+m) hydrogels with different SPEP and Al3+ addition were synthesized by simple one-pot method. The porosity, tensile strength, and swelling ration increased, while compressive strength, elongation at break, self-healing, self-adhesion properties increased first and then decreased as SPEP addition increased from 0 % to 3.80 %. The Al3+ addition increased from 0.08 % to 0.30 %, both tensile and compressive strength increased first and then decreased, while elongation at break kept increasing. Unexpectedly, both increasing SPEP and Al3+ addition reduced the electrical conductivity, while SPEP increased the gauge factor of hydrogel. The hydrogel exhibited optimal comprehensive properties when SPEP and Al3+ addition were 2.31 % and 0.24 %, respectively. The PAA/SPEP2.31%/Al3+0.24% hydrogel showed high tensile strength (107.60 kPa), elongation at break (2426.67 %), strain self-healing rate (81.87 %), adhesion strength (21.61 kPa), and conductivity (3.60 S/m). Overall, the properties of PAA/SPEPn/Al3+m hydrogels can be regulated through tailoring SPEP and Al3+ addition, which can be used as on-demand strategy to improve the performance of PAA/SPEPn/Al3+m hydrogels for each application.

Balling behavior and diamond graphitization of metal-matrix diamond composites by selective laser melting: A quantitative investigation

Selective laser melting (SLM) is an effective and potential technology to prepare metal-matrix diamond composites (MDC). In this study, balling phenomenon and graphitization of diamond of CuSn10-diamond composites by SLM were investigated. By univariate analysis of laser power and scanning speed on the morphology of single track, the balling phenomenon is directly affected by the flowability and wettability of the molten pool. By introducing the concept of laser energy density, balling and diamond graphitization are quantitatively evaluated by the standard deviation σ of surface balling height and IG: ID value, respectively. Balling degree increases with laser energy density, but diamond-graphitization turns out to be the opposite. The CuSn10-diamond composites with low balling and no diamond-graphitization can be obtained at moderate laser energy density of 0.17 J/mm. In terms of performances, bending strength is mainly affected the defects caused by balling, and wear properties is determined by the graphitization of diamond abrasives. Graphitization of diamond results in the transformation of wear mechanism from abrasive to adhesive wear. The optimal properties of 185.36 MPa in bending strength, 0.41 in coefficient of friction and minimum wear loss is obtained in the composite sample prepared at 0.17 J/mm.

Extraction of basil seed gum: Optimization and functional properties

Basil seed gum (BSG), a natural vegetable gum, was extracted by ethanol precipitation method using basil seeds as raw material. Based on the single factor experiments, Box-Behnken response surface test was performed to optimize the extraction conditions, and the physicochemical and functional properties of the extracted basil seed gum, as well as its microstructure, were analyzed in detail. The results showed that the optimal extraction conditions of basil seed gum were as follows: liquid-to-feed ratio of 62:1, temperature of 50 °C, extraction time of 29.50 min, and pH = 8.1, with yield of 11.28 %. BSG was mainly composed of total sugars (93.09 %), uronic acid (18.83 %), proteins (2.77 %), and ash (4.35 %), and its monosaccharides included D-(+)-anhydrous glucose (58.26 %), D-galactose (21.40 %), D-mannose (11.96 %), D-(+)-galacturonic acid (7.82 %), D-arabinose (0.28 %), D-(+)-xylose (0.28 %), and L-rhamnose (0.002 %). Comparative analysis of the functional properties of basil seed gum and three commercial vegetable gums (linseed gum, caraway seed gum, guar gum) showed that basil seed gum had excellent water retention properties, and its water absorption and water holding properties were much better than those of three commercial gums. Rheological characterization showed that BSG was a pseudoplastic fluid with high zero-shear viscosity. In addition, the basil seed gum powder showed an irregular flaky fibrous structure under microscope and was a semi-crystalline polymer. In view of the high aqueous absorption and retention properties of basil seed gum, it has promising applications in food, cosmetic and medical devices.

Effect of the blending between upland and combing waste on cotton fiber and yarn quality

Blending of cotton wastes with raw materials to produce different textile products has economically and environmentally beneficial. This study was carried out in Cotton Research Institute, Agricultural Research Center. This investigation aimed to study the impact of blending ratio on fiber, mechanical and physical yarn quality properties to find out the optimum blending ratio that achieves the optimum yarn quality properties. For this purpose, fiber properties, mechanical and physical yarn quality properties of ring spun yarns produced from cotton variety Giza95, Delta pine245 cotton variety (upland cotton) combed cotton waste of Extra Fine Giza93 and six different binary blend ratios were studied. Blended samples were spun into 36s, and 40s, carded yarns at constant twist multiplier 4 on ring spinning system. the results showed that fiber properties, Physical and mechanical properties of yarns produced from Giza95 were better than 100% upland cotton, 100% combed cotton waste and the other blended yarns.65% Giza95-35% combed waste of blended samples recorded higher fiber properties(maturity ratio, fiber length, uniformity index, fiber strength and fiber elongation) than all blended samples.Also,the same blended ratio at 36s, yarn count give better lea count product strength, yarn strength, yarn elongation, evenness, imperfections and yarn hairiness compared with all blended yarns followed by 65% combed waste - 35% Giza95.While, the lowest yarn quality properties recorded by The blended yarn of 35% Giza95-65% Delta pine245. Also, it observed that increasing proportion of G95 cotton variety in blended samples led to improve fiber, mechanical and physical yarn properties

Reestablishment of dielectric and nonlinear properties for Bi3+ doped CaCu3Ti4O12 ceramics prepared by reduction-reoxidation method

Multilayer ceramics with base metal internal electrodes should be prepared through reduction sintering to avoid the oxidation of the electrodes, followed by a reoxidation process. In this study, Ca1-xBixCu3Ti4-x/4O12 + 0.03 BN ceramics were fabricated using the reduction-reoxidation method and the reestablishment of dielectric and nonlinear characteristics was investigated. It was observed that the dielectric and nonlinear properties depended crucially on the grain size and the second phases at the grain boundaries. The reoxidation behavior was remarkably improved when grain growth was suppressed and second phases were introduced. Optimal electrical properties were obtained for samples with x = 0.1 sintered at 1050 °C and reoxidized at 800 °C. The dielectric loss decreased to a value of about 0.14, while the permittivity remained a relatively large value of about 9.9 × 103 at 103 Hz. Additionally, the nonlinear coefficient and breakdown field were improved to a value of 2.2 and 981.8 V/cm, respectively. This study illustrates an efficient approach to enhance the reestablished dielectric and nonlinear properties for Bi3+ doped CaCu3Ti4O12-based ceramics fabricated through the reduction-reoxidation method.

Injectable Biodegradable Chitosan-PEG/PEG-Dialdehyde Hydrogel for Stem Cell Delivery and Cartilage Regeneration.

Stem cell-based therapy holds promise for cartilage regeneration in treating knee osteoarthritis (KOA). Injectable hydrogels have been developed to mimic the extracellular matrix (ECM) and facilitate stem cell growth, proliferation, and differentiation. However, these hydrogels face limitations such as poor mechanical strength, inadequate biocompatibility, and suboptimal biodegradability, collectively hindering their effectiveness in cartilage regeneration. This study introduces an injectable, biodegradable, and self-healing hydrogel composed of chitosan-PEG and PEG-dialdehyde for stem cell delivery. This hydrogel can form in situ by blending two polymer solutions through injection at physiological temperature, encapsulating human adipose-derived stem cells (hADSCs) during the gelation process. Featuring a 3D porous structure with large pore size, optimal mechanical properties, biodegradability, easy injectability, and rapid self-healing capability, the hydrogel supports the growth, proliferation, and differentiation of hADSCs. Notably, encapsulated hADSCs form 3D spheroids during proliferation, with their sizes increasing over time alongside hydrogel degradation while maintaining high viability for at least 10 days. Additionally, hADSCs encapsulated in this hydrogel exhibit upregulated expression of chondrogenic differentiation genes and proteins compared to those cultured on 2D surfaces. These characteristics make the chitosan-PEG/PEG-dialdehyde hydrogel-stem cell construct suitable for direct implantation through minimally invasive injection, enhancing stem cell-based therapy for KOA and other cell-based treatments.