Optical-resolution Photoacoustic Microscopy System Research Articles

Testbed mimicking intracellular environment for optical-resolution photoacoustic microscopy

Photoacoustic imaging (PAI) represents an innovative method that utilizes optics for transmission and acoustic for sensing. Within the realm of PAI modalities, optical-resolution photoacoustic microscopy (OR-PAM) stands out for its ability to achieve high-resolution cellular and intracellular imaging. However, an optical testbed setup emulating the intracellular environment and accelerating the development of cellular-level OR-PAM systems has not been established. In this study, we present a testbed setup designed to mimic intracellular conditions. Assessment of this testbed setup efficacy involved embedding photoacoustic contrasts and imaging them using an OR-PAM system. The imaging results show that our testbed setup can provide instrumental in accurately measuring photoacoustic signals within an intracellular aqueous environment, avoiding risks of the contamination and degradation of the acoustic transducer.

Photoacoustic microscopy for real-time monitoring of near-infrared optical absorbers inside biological tissue.

We developed a high-speed optical-resolution photoacoustic microscopy (OR-PAM) system using a high-repetition-rate supercontinuum (SC) light source and a two-axes Galvano scanner. The OR-PAM system enabled real-time imaging of optical absorbers inside biological tissues with excellent excitation wavelength tunability. In the near-infrared (NIR) wavelength range, high-speed OR-PAM faces limitations due to the lack of wavelength-tunable light sources. Our study aimed to enable high-speed OR-PAM imaging of various optical absorbers, including NIR contrast agents, and validate the performance of high-speed OR-PAM in the detection of circulating tumor cells (CTCs). A high-repetition nanosecond pulsed SC light source was used for OR-PAM. The excitation wavelength was adjusted by bandpass filtering of broadband light pulses produced by an SC light source. Phantom and in vivo experiments were performed to detect tumor cells stained with an NIR contrast agent within flowing blood samples. The newly developed high-speed OR-PAM successfully detected stained cells both in the phantom and in vivo. The phantom experiment confirmed the correlation between the tumor cell detection rate and tumor cell concentration in the blood sample. The high-speed OR-PAM effectively detected stained tumor cells. Combining high-speed OR-PAM with molecular probes that stain tumor cells in vivo enables in vivo CTC detection.

In vivo structural and functional imaging of human nailbed microvasculature using photoacoustic microscopy.

Monitoring microvascular structure and function is of great significance for the diagnosis of many diseases. In this study, we demonstrate the feasibility of OR-PAM to nailbed microcirculation detection as a new, to the best of our knowledge, application scenario in humans. We propose a dual-wavelength optical-resolution photoacoustic microscopy (OR-PAM) with improved local-flexible coupling to image human nailbed microvasculature. Microchip lasers with 532 nm wavelength are employed as the pump sources. The 558 nm laser is generated from the 532 nm laser through the stimulated Raman scattering effect. The flowing water, circulated by a peristaltic pump, maintains the acoustic coupling between the ultrasonic transducer and the sample. These designs improve the sensitivity, practicality, and stability of the OR-PAM system for human in vivo experiments. The imaging of the mouse ear demonstrates the ability of our system to acquire structural and functional information. Then, the system is applied to image human nailbed microvasculature. The imaging results reveal that the superficial capillaries are arranged in a straight sagittal pattern, approximately parallel to the long axis of the finger. The arterial and venular limbs are distinguished according to their oxygen saturation differences. Additionally, the images successfully discover the capillary loops with single or multiple twists, the oxygen release at the end of the capillary loop, and the changes when the nailbed is abnormal.

Front Cover

This study presents a simple, but robust and efficient denoising technique for fast optical resolution photoacoustic microscopy system (OR‐PAM). Impulsive noise and background noise in photoacoustic images are common issues of OR‐PAM system when laser power is limited. Our developed multi‐stage adaptive noise reduction technique efficiently and robustly removes the noises under noisy data acquisition conditions, providing a strong foundation for photoacoustic microscopy with limited laser power.Further details can be found in the article by Nizar Guezzi, Changho Lee, Thanh Dat Le, Hyojin Seong, Kang‐Ho Choi, Jung‐Joon Min, and Jaesok Yu (e202200164). image

High-speed wide-field photoacoustic microscopy using a cylindrically focused transparent high-frequency ultrasound transducer

Combining focused optical excitation and high-frequency ultrasound detection, optical-resolution photoacoustic microscopy (OR-PAM) can provide micrometer-level spatial resolution with millimeter-level penetration depth and has been employed in a variety of biomedical applications. However, it remains a challenge for OR-PAM to achieve a high imaging speed and a large field of view at the same time. In this work, we report a new approach to implement high-speed wide-field OR-PAM, using a cylindrically-focused transparent ultrasound transducer (CFT-UT). The CFT-UT is made of transparent lithium niobate coated with indium-tin-oxide as electrodes. A transparent cylindrical lens is attached to the transducer surface to provide an acoustic focal line with a length of 9 mm. The excitation light can pass directly through the CFT-UT from the above and thus enables a reflection imaging mode. High-speed imaging is achieved by fast optical scanning of the focused excitation light along the CFT-UT focal line. With the confocal alignment of the optical excitation and acoustic detection, a relatively high detection sensitivity is maintained over the entire scanning range. The CFT-UT-based OR-PAM system has achieved a cross-sectional frame rate of 500 Hz over the scanning range of 9 mm. We have characterized the system’s performance on phantoms and demonstrated its application on small animal models in vivo. We expect the new CFT-UT-based OR-PAM will find matched biomedical applications that need high imaging speed over a large field of view.

Low-cost high-resolution photoacoustic microscopy of blood oxygenation with two laser diodes.

Optical-resolution photoacoustic microscopy (OR-PAM) has been widely used for imaging blood vessel and oxygen saturation of hemoglobin (sO2), providing high-resolution functional images of living animals in vivo. However, most of them require one or multiple bulky and costly pulsed lasers, hindering their applicability in preclinical and clinical settings. In this paper, we demonstrate a reflection-mode low-cost high-resolution OR-PAM system by using two cost-effective and compact laser diodes (LDs), achieving microvasculature and sO2 imaging with a high lateral resolution of ∼6 µm. The cost of the excitation sources has dramatically reduced by ∼20-40 times compared to that of the pulsed lasers used in state-of-the-art OR-PAM systems. A blood phantom study was performed to show a determination coefficient R 2 of 0.96 in linear regression analysis. Experimental results of in vivo mouse ear imaging show that the proposed dual-wavelength LD-based PAM system can provide high-resolution functional images at a low cost.

Spectroscopically resolved photoacoustic microscopy using a broadband surface plasmon resonance sensor

Photoacoustic spectroscopic analysis allows for evaluating biological microscopic features, such as morphology and viscoelasticity, which offers the opportunities of comprehensively understanding the biological specimens. However, an ongoing challenge arises from inadequate response to the photoacoustic impulses owing to limited bandwidth of the piezoelectric transducer. Here, we develop spectroscopically resolved optical-resolution photoacoustic microscopy (OR-PAM) by incorporating a broadband surface plasmon resonance sensor (∼169.5-MHz bandwidth) as the ultrasonic detector. The photoacoustic spectra from polystyrene and polymethyl methacrylate microspheres represent the close dependence upon the density and sound speed in addition to the diameter. The photoacoustic structural images of the two types of microspheres with the same morphology manifest the nearly identical appearances, while the photoacoustic spectroscopic analysis permits them to be clearly distinguished because of the different densities and sound speeds. The results suggest that, by simultaneously revealing the anatomic structures and acoustic spectra, our spectroscopically resolved OR-PAM system is potentially valuable in characterizing the microscopic features of biological samples at a cellular level.

High-speed functional photoacoustic microscopy using a water-immersible two-axis torsion-bending scanner

Optical-resolution photoacoustic microscopy (OR-PAM) can provide functional, anatomical, and molecular images at micrometer level resolution with an imaging depth of less than 1 mm in tissue. However, the imaging speed of traditional OR-PAM is often low due to the point-by-point mechanical scanning and cannot capture time-sensitive dynamic information. In this work, we demonstrate a recent effort in improving the imaging speed of OR-PAM, using a newly developed water-immersible two-axis scanner. Driven by water-compatible electromagnetic actuation force, the new scanning mirror employs a novel torsion-bending mechanism to achieve fast 2D scanning. The torsion scanning along the fast-axis works in the resonant model, and the bending scanning along the slow-axis operate at the quasi-static mode. The scanning speed and scanning range along the two axes can be independently adjusted. Steered by the two-axis torsion-bending scanning mirror immersed in water, the focused excitation light and the generated acoustic wave can be confocally aligned over the entire imaging area. Thus, a high imaging speed can be achieved without sacrificing the detection sensitivity. Equipped with the torsion-bending scanner, the high-speed OR-PAM system has achieved a cross-sectional frame rate of 400 Hz, and a volumetric imaging speed of 1 Hz over a field of view of 1.5 × 2.5 mm2. We have also demonstrated high-speed OR-PAM of the hemodynamic changes in response to pharmaceutical and physiological challenges in small animal models in vivo. We expect the torsion-bending scanner based OR-PAM will find matched biomedical studies of tissue dynamics.

Broadband surface plasmon resonance sensor for fast spectroscopic photoacoustic microscopy

High-speed optical-resolution photoacoustic microscopy (OR-PAM), integrating the merits of high spatial resolution and fast imaging acquisition, can observe dynamic processes of the optical absorption-based molecular specificities. However, it remains challenging for the evaluation to morphological and physiological parameters that are closely associated with photoacoustic spectrum due to the inadequate ultrasonic frequency response of the routinely-employed piezoelectric transducer. By utilizing the galvanometer for fast optical scanning and our previously-developed surface plasmon resonance sensor as an unfocused broadband ultrasonic detector, high-speed spectroscopic photoacoustic imaging was accessed in the OR-PAM system, achieving an acoustic bandwidth of ∼125 MHz and B-scan rate at ∼200 Hz over a scanning range of ∼0.5 mm. Our system demonstrated the dynamic imaging of the moving phantoms’ structures and the simultaneous characterization of their photoacoustic spectra over time. Further, fast volumetric imaging and spectroscopic analysis of microanatomic features of a zebrafish eye ex vivo was obtained label-freely.

A backward-mode optical-resolution photoacoustic microscope for 3D imaging using a planar Fabry-Pérot sensor

Optical-resolution photoacoustic microscopy (OR-PAM) combines high spatial resolution and strong absorption-based contrast in tissue, which has enabled structural and spectroscopic imaging of endogenous chromophores, primarily hemoglobin. Conventional piezoelectric ultrasound transducers are typically placed far away from the photoacoustic source due to their opacity, which reduces acoustic sensitivity. Optical ultrasound sensors are an alternative as their transparency allows them to be positioned close to the sample with minimal source-detector distances. In this work, a backward-mode OR-PAM system based on a planar Fabry-Pérot ultrasound sensor and coaxially aligned excitation and interrogation beams was developed. Two 3D imaging modes, using raster-scanning for enhanced image quality and continuous-scanning for fast imaging, were implemented and tested on a leaf skeleton phantom. In fast imaging mode, a scan-rate of 100,000 A-lines/s was achieved. 3D images of a zebrafish embryo were acquired in vivo in raster-scanning mode. The transparency of the FP sensor in the visible and near-infrared wavelength region makes it suitable for combined functional and molecular imaging applications using OR-PAM and multi-photon fluorescence microscopy.

Beamforming for large-area scan and improved SNR in array-based photoacoustic microscopy

Beamforming enhances the performance of array-based photoacoustic microscopy (PAM) systems for large-area scan. In this study, we quantify the imaging performance of a large field-of-view optical-resolution photoacoustic-microscopy system using an phased-array detector. The system combines a low-cost pulsed-laser diode with a 128-element linear ultrasound probe. Signal-to-noise ratio (SNR) and generalized contrast-to-noise ratio (gCNR) are quantified using the phased-array detector and applying three beamforming strategies: a no-beamforming method equivalent to a single-element flat transducer, a fixed focus beamforming method that mimics a single-element focused transducer, and a dynamic focus beamforming using a delay-and-sum (DAS) algorithm. The imaging capabilities of the system are demonstrated generating high-resolution images of tissue-mimicking phantoms containing sub-millimetre ink tubes and an ex vivo rabbit’s ear. The results show that dynamic focus DAS beamforming increases and homogenizes SNR along 1-cm2 images, reaching values up to 15 dB compared to an unfocused detector and up to 30 dB compared to out-of-focus regions of the fixed focus configuration. Moreover, the obtained values of gCNR using the DAS beamformer indicate an excellent target visibility, both on phantoms and ex vivo. This strategy makes it possible to scan larger surfaces compared to standard configurations using single-element detectors, paving the way for advanced array-based PAM systems.

Optical-Resolution Photoacoustic Microscopy Using Transparent Ultrasound Transducer.

The opacity of conventional ultrasound transducers can impede the miniaturization and workflow of current photoacoustic systems. In particular, optical-resolution photoacoustic microscopy (OR-PAM) requires the coaxial alignment of optical illumination and acoustic-detection paths through complex beam combiners and a thick coupling medium. To overcome these hurdles, we developed a novel OR-PAM method on the basis of our recently reported transparent lithium niobate (LiNbO3) ultrasound transducer (Dangi et al., Optics Letters, 2019), which was centered at 13 MHz ultrasound frequency with 60% photoacoustic bandwidth. To test the feasibility of wearable OR-PAM, optical-only raster scanning of focused light through a transducer was performed while the transducer was fixed above the imaging subject. Imaging experiments on resolution targets and carbon fibers demonstrated a lateral resolution of 8.5 µm. Further, we demonstrated vasculature mapping using chicken embryos and melanoma depth profiling using tissue phantoms. In conclusion, the proposed OR-PAM system using a low-cost transparent LiNbO3 window transducer has a promising future in wearable and high-throughput imaging applications, e.g., integration with conventional optical microscopy to enable a multimodal microscopy platform capable of ultrasound stimulation.

In Vivo Reflection-Mode Photoacoustic Microscopy Enhanced by Plasmonic Sensing with an Acoustic Cavity.

Relying on high-sensitivity refractive index sensing and a highly constrained evanescent field of surface plasmon resonance (SPR), broadband photoacoustic (PA) pressure transients were measured using an SPR sensor instead of routinely used piezoelectric ultrasonic transducers. An acoustic cavity made from stainless steel and having a designed ellipsoidal inner surface redirected laser-induced PA waves from the PA excitation spot to the SPR sensor. By incorporating the SPR sensor with the acoustic cavity, we developed optical-resolution photoacoustic microscopy (OR-PAM) with multiple advantages, including reflection-mode signal capture, improved PA detection sensitivity, increased PA spectral bandwidth as broad as ∼98 MHz, and micrometer-scale lateral resolution. This allowed label-free volumetric PA imaging of vasculature in not only the thin ear but also the thick forelimb of living mice. With these combined advantages, our OR-PAM system potentially offers more opportunities for biomedical investigation, for example, when studying microcirculations in the eye and cortex.

Isometrically Resolved Photoacoustic Microscopy Based on Broadband Surface Plasmon Resonance Ultrasound Sensing.

Photoacoustic microscopy (PAM) can measure optical absorption-based molecular specificities within tissues. Despite the diffraction-limited lateral resolution in optical-resolution photoacoustic microscopy (OR-PAM), the ongoing challenge is poor axial resolution because of an insufficient ultrasound detection bandwidth, which hampers PAM volumetric imaging. We propose polarization-differential surface plasmon resonance (SPR) sensing for broadband and high-sensitivity photoacoustic (PA) detection, allowing OR-PAM with comparable resolution along lateral and axial directions. This sensor possesses an estimated noise-equivalent-pressure sensitivity of ∼477 Pa over an approximately linear pressure response up to 107 kPa. Moreover, an improved PA detection bandwidth of ∼173 MHz permits an axial resolution (∼7.6 μm) that approaches the lateral resolution (∼4.5 μm) of our OR-PAM system. The capability in spatially isometric micrometer-scale resolution enables in vivo volumetric label-free imaging of the microvasculature of a mouse ear. The SPR sensing technology promises broader applications of PAM in biomedical studies such as microcirculation.

Optical-resolution photoacoustic microscopy of oxygen saturation with nonlinear compensation.

Optical-resolution photoacoustic microscopy (OR-PAM) of oxygen saturation (sO2) offers high-resolution functional information on living tissue. Limited by the availability of high-speed multi-wavelength lasers, most OR-PAM systems use wavelengths around 532nm. Blood has high absorption coefficients in this spectrum, which may cause absorption saturation and induce systematic errors in sO2 imaging. Here, we present nonlinear OR-PAM that compensates for the absorption saturation in sO2 imaging. We model the absorption saturation at different absorption coefficients and ultrasonic bandwidths. To compensate for the absorption saturation, we develop an OR-PAM system with three optical wavelengths and implement a nonlinear algorithm to compute sO2. Phantom experiments on bovine blood validate that the nonlinear OR-PAM can improve the sO2 accuracy by up to 0.13 for fully oxygenated blood. In vivo sO2 imaging has been conducted in the mouse ear. The nonlinear sO2 results agree with the normal physiological values. These results show that the absorption saturation effect can be compensated for in nonlinear OR-PAM, which improves the accuracy of functional photoacoustic imaging.

Ultrafast laser-scanning optical resolution photoacoustic microscopy at up to 2 million A-lines per second

The imaging speed of optical resolution photoacoustic microscopy (OR-PAM) using pulsed excitation is fundamentally limited by the range ambiguity condition, which defines the maximum laser pulse repetition frequency (PRF). To operate at this theoretical upper limit and maximize acquisition speed, a custom-built fiber laser capable of operating at a PRF of up to 2 MHz was combined with a fast laser scanning optical OR-PAM system based on a stationary fiber-optic ultrasound sensor. A large area (10 mm × 10 mm) of the mouse ear was imaged within 8 s, when acquiring 16 million A-lines and operating the laser at a PRF of 2 MHz. This corresponds to a factor of four improvement in imaging speed compared to the fastest OR-PAM system previously reported. The ability to operate at high-imaging frame rates also allows the capture of hemodynamic events such as blood flow. It is considered that this system offers opportunities for high throughput imaging and visualizing dynamic physiological events using OR-PAM.

High-speed widefield photoacoustic microscopy of small-animal hemodynamics.

Optical-resolution photoacoustic microscopy (OR-PAM) has become a popular tool in small-animal hemodynamic studies. However, previous OR-PAM techniques variously lacked a high imaging speed and/or a large field of view, impeding the study of highly dynamic physiologic and pathophysiologic processes over a large region of interest. Here we report a high-speed OR-PAM system with an ultra-wide field of view, enabled by an innovative water-immersible hexagon-mirror scanner. By driving the hexagon-mirror scanner with a high-precision DC motor, the new OR-PAM has achieved a cross-sectional frame rate of 900 Hz over a 12-mm scanning range, which is 3900 times faster than our previous motor-scanner-based system and 10 times faster than the MEMS-scanner-based system. Using this hexagon-scanner-based OR-PAM system, we have imaged epinephrine-induced vasoconstriction in the whole mouse ear and vascular reperfusion after ischemic stroke in the mouse cortex in vivo, with a high spatial resolution and high volumetric imaging speed. We expect that the hexagon-scanner-based OR-PAM system will become a powerful tool for small animal imaging where the hemodynamic responses over a large field of view are of interest.

Miniaturized Optical Resolution Photoacoustic Microscope Based on a Microelectromechanical Systems Scanning Mirror.

In this paper, we report a miniaturized optical resolution photoacoustic microscopy system based on a microelectromechanical system (MEMS) scanning mirror. A two-dimensional MEMS scanning mirror was used to achieve raster scanning of the excitation optical focus. The wideband photoacoustic signals were detected by a flat ultrasound transducer with a center frequency of 10 MHz and an active area of 2 mm in diameter. The size and weight of this device were 60 mm × 30 mm × 20 mm and 40 g, respectively. We evaluated this system using sharp blades, carbon fibers, and a silver strip target. In vivo experiments of imaging vasculatures in the mouse ear, brain, and human lip were completed to demonstrate its potential for biological and clinical applications.

Optical resolution photoacoustic microscopy based on multimode fibers.

Photoacoustic microscopy (PAM) is a multiscale imaging technique. In optical-resolution photoacoustic microscopy (OR-PAM), a single mode (SM) fiber is normally used as the source of optical excitation to be focused into a diffraction-limited spot. Recent advances in OR-PAM have improved its imaging speed using microelectromechanical systems (MEMS). Here we report for the first time the use of a multimode (MM) fiber as the optical excitation source for high resolution OR-PAM in vivo imaging. A high-speed MEMS scanner based OR-PAM system combined with the mechanical movement to provide wide area imaging was used. The use of multimode fiber for achieving tight optical focus would make the optical alignment easier and high repetition rate light delivery possible for high-speed OR-PAM imaging. A lateral resolution of 3.5 µm and axial resolution of 27 µm with ~1.5 mm imaging depth was successfully demonstrated using the system. The efficacy of multimode fibers for achieving tight focus is beneficial for developing high-resolution photoacoustic endoscopy systems and can be combined with other optical endoscopic imaging modalities as well.

In vivo photoacoustic monitoring using 700-nm region Raman source for targeting Prussian blue nanoparticles in mouse tumor model

Photoacoustic imaging (PAI) is a noninvasive imaging tool to visualize optical absorbing contrast agents. Due to high ultrasonic resolution and superior optical sensitivity, PAI can be used to monitor nanoparticle-mediated cancer therapy. The current study synthesized Food and Drug Administration-approved Prussian blue (PB) in the form of nanoparticles (NPs) with the peak absorption at 712 nm for photoacoustically imaging tumor-bearing mouse models. To monitor PB NPs from the background tissue in vivo, we also developed a new 700-nm-region stimulated Raman scattering (SRS) source (pulse energy up to 200 nJ and repetition rate up to 50 kHz) and implemented optical-resolution photoacoustic microscopy (OR-PAM). The SRS-assisted OR-PAM system was able to monitor PB NPs in the tumor model with micrometer resolution. Due to strong light absorption at 712 nm, the developed SRS light yielded a two-fold higher contrast from PB NPs, in comparison with a 532-nm pumping source. The proposed laser source involved cost-effective and simple system implementation along with high compatibility with the fiber-based OR-PAM system. The study highlights the OR-PAM system in conjunction with the tunable-color SRS light source as a feasible tool to assist NP-mediated cancer therapy.