Fiber Optic Probe Research Articles

Chitosan-enhanced sensitivity of mercaptoundecanoic acid (MUA)- capped gold nanorod based localized surface plasmon resonance (LSPR) biosensor for detection of alpha-synuclein oligomer biomarker in parkinson's disease.

Alpha-synuclein oligomers play a crucial role in the early diagnosis of Parkinson's disease (PD). In this study, a mercaptoundecanoic acid (MUA)-capped gold nanorod (GNR)-coated and chitosan (CH)-immobilized fiber optic probe has shown considerable sensitivity of its detection. The proposed U-shaped fiber optic biosensor based on localized surface plasmon resonance (LSPR) was applied to detect α-syn oligomer (OA) biomarker. By analyzing OA concentrations, the biosensor achieved a limit of detection of (LOD) 11pM within the concentration range of 10-100pM and the sensitivity value was found as 502.69 Δλ/RIU. Upon analysis of the CV% (coefficient of variation) and accuracy/recovery values, it is revealed that the sensor successfully fulfilled the criteria for success, displaying accuracy/recovery values within the range of 80%-120% and CV% values below 20%. This sensor presents significant advantages, including high sensitivity, specificity, and ability to detect very low concentrations of OA. In conclusion, the suggested U-shaped fiber optic biosensor has the potential to be valuable in the early detection of PD from a clinical perspective.

Quantitative assessment of chlorine gas inhalation injury based on endoscopic OCT and spectral encoded interferometric microscope imaging with deep learning.

Chlorine exposure can cause severe airway injuries. While the acute effects of chlorine inhalation are well-documented, the structural changes resulting from the post-acute, high-level chlorine exposure remain less understood. Airway sloughing is one of the standards for doctors to evaluate the lung function. Here, we report the application of a high-resolution swept-source optical coherence tomography system to investigate the progression of injury based on airway sloughing evaluation in a chlorine inhalation rabbit model. This system employs a 1.2mm diameter flexible fiberoptic endoscopic probe via an endotracheal tube to capture in vivo large airway anatomical changes before and as early as 30minafter acute chlorine exposure. We conducted an animal study using New Zealand white rabbits exposed to acute chlorine gas (800 ppm, 6min) during ventilation and monitored them using optical coherence tomography (OCT) for 6h. To measure the volume of airway sloughing induced by chlorine gas, we utilized deep learning for the segmentation task on OCT images. The results showed that the volume of chlorine induced epithelial sloughing on rabbit tracheal walls initially increased, peaked around 30min, and then decreased. Furthermore, we utilized a spectral encoded interferometric microscopy system to study ex vivo airway cilia beating dynamics based on Doppler shift, aiding in elucidating how chlorine gas affects cilia beating function. Cilia movability and beating frequency were decreased because of the epithelium damage. This quantitative approach has the potential to enhance the diagnosis and monitoring of injuries from toxic gas inhalation and to evaluate the efficacy of antidote treatments for these injuries.

Myoglobin saturation as an intracellular indicator for transfusion need in oncology patients.

This study aims to demonstrate the potential of myoglobin saturation as an indicator of oxygen delivery adequacy to help determine the need for red cell transfusion. Modern blood management approaches have been established to optimise use of red blood cells for transfusions in patients with anaemia. However, most approaches make recommendations to transfuse based on haemoglobin or haematocrit levels and do not directly address adequacy of oxygen delivery. Intracellular oxygen determined by myoglobin saturation directly measures oxygen delivery at the tissue level. A custom built spectrometer system with an optical fibre probe was used in this pilot study to measure muscle cell myoglobin saturation noninvasively from the first digital interosseous muscles in patients undergoing planned red blood cell transfusion. Patients were recruited from both the in-patient and out-patient oncology service at a major university medical centre. Measurements were made immediately before, immediately after, and 24 h following transfusion. Clinical data and tissue oxygen values from the Somanetics INVOS system were also collected. Myoglobin saturation, and thus cellular oxygen increased in some, but not all patients receiving a transfusion, and was most pronounced in patients who initially had low myoglobin saturation compared with the group as a whole. Clinical decisions to transfuse based on haemoglobin or haematocrit thresholds alone are likely insufficient to optimise use of red blood cell transfusions. The combination of haemoglobin or haematocrit with myoglobin saturation may optimally determine who will benefit physiologically from a transfusion.

Imaging high-frequency voltage dynamics in multiple neuron classes of behaving mammals.

Fluorescent genetically encoded voltage indicators report transmembrane potentials of targeted cell-types. However, voltage-imaging instrumentation has lacked the sensitivity to track spontaneous or evoked high-frequency voltage oscillations in neural populations. Here we describe two complementary TEMPO voltage-sensing technologies that capture neural oscillations up to ~100 Hz. Fiber-optic TEMPO achieves ~10-fold greater sensitivity than prior photometry systems, allows hour-long recordings, and monitors two neuron-classes per fiber-optic probe in freely moving mice. With it, we uncovered cross-frequency-coupled theta- and gamma-range oscillations and characterized excitatory-inhibitory neural dynamics during hippocampal ripples and visual cortical processing. The TEMPO mesoscope images voltage activity in two cell-classes across a ~8-mm-wide field-of-view in head-fixed animals. In awake mice, it revealed sensory-evoked excitatory-inhibitory neural interactions and traveling gamma and 3-7 Hz waves in the visual cortex, and previously unreported propagation directions for hippocampal theta and beta waves. These technologies have widespread applications probing diverse oscillations and neuron-type interactions in healthy and diseased brains.

3D printed UV-sensing optical fiber probes: manufacturing, properties, and performance

UV sensing 3D printed optical fiber hydrogels provide a flexible and precise method of remotely of detecting exposure to UV radiations. The optical fibers were created using digital light processing 3D printing technique with hydrogel composites, including micro-sized photochromic dyes (pink, blue and their combination). When exposed to ultraviolet (UV) radiation, these dyes exhibited specific absorption characteristics, resulting in significant decreases in both reflection and transmittance mode spectra at 560 nm, 620 nm, and 590 nm. Optical fibers of lengths 1, 2, and 3 cm were manufactured in two orientations: vertical and horizontal. Scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction were utilized to characterize the printed fiber probes. The optical performance of the fibers was tested using customized measurement setups. The reflection and transmission of the printed fibers reduced as the length increased due to optical losses. Reflection and transmisson loss of 20–40% can be observed when the length is increased from 1 to 3 cm. The maximum loss in reflection is observed for pink fiber in the presence of UV irradiation. Also, the type of powder used impacted the response and retraction time, whereas the mixed fiber showed the highest response time of 12–20 s under various conditions. The pink dye added fiber probes shows quick response to UV radiation. An increase in the response time is observed with increasing fiber length. The impact of printing orientation on the transmission and reflectance mode operations of optical fibers was assessed. In addition, the stability of the fiber probes are assesed using a green laser having wavelength 532 nm. This work comprehensively examines the optical properties, manufacturing procedures, and sensing capacities of UV-sensitive photochromic optical fiber sensors.

Real-time in vivo confocal laser endomicroscopic imaging of equine endometrium: Preliminary observations and feasibility study

Endometrial health is vital for the reproductive efficiency of broodmares and accurate diagnostic testing is crucial for directing the best treatment options and outcomes. Confocal laser endomicroscopy (CLE) is an endoscopic technique for obtaining in-vivo, real-time microscopic imaging of tissues using a fiber optic probe. CLE relies on induced tissue fluorescence and fluorescein sodium, given intravenously, is the contrast agent most used in human medicine. This study aimed to determine the feasibility of CLE for imaging equine endometrium and determine a standard dose of fluorescein sodium to achieve optimal cellular imaging. In-vivo CLE was performed on 44 mares, and the images were compared with routine histopathological analysis of endometrial biopsies. No adverse reactions occurred after IV fluorescein sodium administration and a dose of 4 mg/kg was established (0.04 mL/kg of 10 % fluorescein sodium solution) to achieve optimal image contrast. CLE enabled multiple regions of the endometrium to be assessed quickly. Distinct tissue architecture patterns could be appreciated using CLE, and the luminal epithelium could be assessed for integrity (ulceration) and exocytosed inflammatory cells. Endometrial gland distribution, density, shape, and epithelial height were evaluated. Blood vessels were clearly outlined, and inflammatory cells and fibrosis were discernable within the interstitium. Image quality varied between mares, and the stage of oestrous cycle may have been a factor of influence. This novel imaging modality enables collection of “virtual” biopsies and facilitates critical assessment of multiple regions of the uterus compared with the standard histopathologic assessment of a single random tissue biopsy.

Optical Fiber Probe with Integrated Micro-Optical Filter for Raman and Surface-Enhanced Raman Scattering Sensing.

Optical fiber Raman and surface-enhanced Raman scattering (SERS) probes hold great promise for in vivo biosensing and in situ monitoring of hostile environments. However, the silica Raman scattering background generated within the optical fiber increases in proportion to the length of the fiber, and it can swamp the signal from the target analyte. While filtering can be applied at the distal end of the fiber, the use of bulk optical elements has limited probe miniaturization to a diameter of 600 µm, which in turn limits the potential applications. To overcome this limitation, femtosecond laser micromachining was used to fabricate a prototype micro-optical filter, which was directly integrated on the tip of a 125 µm diameter double-clad fiber (DCF) probe. The outer surface of the microfilter was further modified with a nanostructured, SERS-active, plasmonic film that was used to demonstrate proof-of-concept performance with thiophenol as a test analyte. With further optimization of the associated spectroscopic system, this ultra-compact microprobe shows great promise for Raman and SERS optical fiber sensing.

Assembly and characterization of an optical fiber probe for use in a portable Raman spectrometer

This study describes the assembly and testing of an optical fiber Raman probe for use in a portable spectrometer using a 785 nm laser. The Raman probe was tested on edible vegetable oils (extra virgin olive, canola, sunflower, corn, and soybean), with the distal end of the probe immersed in each sample. The spectra of a dipyrone tablet and a mothball were also obtained. The silica peaks were subtracted by taking a spectrum with the probe tip immersed in water. The spectra of the samples exhibited characteristic peaks from vibrations of unsaturated fatty acids between 900 and 1800 cm−1, as well as characteristic peaks of silica from 600 to 1200 cm−1. The spectra of the samples after subtraction of the silica spectrum (probe in water) showed characteristic peaks without alterations in position or relative intensities compared without the probe. Exploratory analysis by principal component analysis was able to identify peaks of the constituent fatty acids in the oils and associate them with the oil type. A classification model based on partial least squares regression allowed for the classification of oil spectra with an accuracy of 77%. This study demonstrated the feasibility of coupling a probe to a portable Raman spectrometer with the goal of monitoring and controlling industrial processes.

Fiber optic probe integrated with colloidal nanoparticles with directional diffraction selectivity for magnetic field vector detection

A fiber optic probe integrated with colloidal nanoparticles with directional diffraction selectivity is proposed for wide-bandwidth magnetic field vector detection. The probe is constructed with the multimode fiber in which the end-surface is integrated with the Fe3O4@C colloidal nanoparticles by a silicone tube. The colloidal nanoparticles form a three-dimensional photonic crystal structure by magnetic field for diffraction selectivity. The lattice constant and diffraction angle are adjusted by the intensity and direction of the magnetic field, respectively. Obtaining the directional diffraction light through the magnetic field-induced photonic band gap shift with the wavelength blue shift and reflectivity change is confirmed by theory and experiment. The results show that the maximum sensitivity reaches up to 19.7 nm/mT in response range from 13 mT to 200 mT. For vector detection, the peak wavelength shift from 740 nm to 485 nm and reflectance shift from 71% to 7% covering the 0–45° region is verified. In addition, the proposed method could decouple intensity and direction of the magnetic field completely. The fiber optic probe integrated with colloidal nanoparticles has wide detection range and high sensitivity with rapid response. It will open up new horizons for inspiring design and application of magnetic field vector detection in robot posture control and motion perception.

Offset VSP acquired with a single-use fiber-optic probe: Gorgon CCS case study

There are many challenges associated with monitoring industrial subsurface CO2 storage. Utilizing a reliable strategy for monitoring and assurance is paramount. Numerous aspects and trade-offs need to be considered when designing a cost-effective monitoring solution that must satisfy regulatory and social licensing requirements and minimize operational complexity. Among various geophysical techniques that are included in the suite of carbon capture and storage (CCS) monitoring programs, seismic surveys provide reliable observations of the deep subsurface. However, active surface seismic techniques are expensive, resulting in significant time separation between surveys (several months or years). Downhole seismic approaches combined with fiber-optic sensing provide flexible options in designing on-demand monitoring strategies. Distributed acoustic sensing offers the opportunity to utilize injection wells for downhole time-lapse seismic imaging and microseismic detection, minimizing the impact on production operations. This paper presents the results of a multioffset vertical seismic profiling survey acquired in CO2 injection wells using bare fibers. The fibers were deployed inside the production tubing through FiberLine Intervention technology developed by Well-SENSE. The test utilized two injection wells for active seismic acquisition. The study took place on Barrow Island (Western Australia) as part of the Gorgon CCS project. The study demonstrates the technological advantages of fast deployment of the sensing fiber and the high quality of acquired seismic data. The paper highlights characteristic noise patterns in the recorded data and suggests approaches to attenuate their effects on seismic image quality. Finally, the impact of survey geometry and directional sensitivity of fiber on the recorded wavefield and the quality of seismic imaging is discussed.

An Efficient Bio-Receptor Layer Combined with a Plasmonic Plastic Optical Fiber Probe for Cortisol Detection in Saliva.

Cortisol is a clinically validated stress biomarker that takes part in many physiological and psychological functions related to the body's response to stress factors. In particular, it has emerged as a pivotal tool for understanding stress levels and overall well-being. Usually, in clinics, cortisol levels are monitored in blood or urine, but significant changes are also registered in sweat and saliva. In this work, a surface plasmon resonance probe based on a D-shaped plastic optical fiber was functionalized with a glucocorticoid receptor exploited as a highly efficient bioreceptor specific to cortisol. The developed plastic optical fiber biosensor was tested for cortisol detection in buffer and artificial saliva. The biosensor response showed very good selectivity towards other hormones and a detection limit of about 59 fM and 96 fM in phosphate saline buffer and artificial saliva, respectively. The obtained detection limit, with a rapid detection time (about 5 min) and a low-cost sensor system, paved the way for determining the cortisol concentration in saliva samples without any extraction process or sample pretreatment via a point-of-care test.

Real-time cationic sensing using plasmonic fiber optic sensor based phosphoryl-carrageenan

We report Fiber Optic-Localized Surface Plasmon Resonance (FO-LSPR) spectroscopy sensors comprising a coating of spherical silver nanoparticles (AgNPs) embedded in phosphoryl-carrageenan. This is a novel report on modified carrageenan namely phosphoryl-carrageenan as sensing materials for cations specifically ammonium ions (NH4+). The morphology of carrageenan and phosphoryl-carrageenan coatings on the fiber optic probe was uneven and wavelike topography, indicating the successful coating on the fiber optic probe surface. The FO-LSPR showed a distinct dip in reflectivity in the region of 370–400 nm due to the resonance frequency of spherical AgNPs. The response and recovery times of FO-LSPR sensors for 1 ppm NH4+ and deionized water were <20 s and ∼1.2 minutes, respectively, with five times stable repeatability. The sensitivity of the FO-LSPR phosphoryl-carrageenan was 3.441 nm/ppm. Equally, the limits of detection and quantitation of fiber optic FO-LSPR were 0.336 and 1.018 ppm, respectively. Meanwhile, the dynamic range of the FO-LSPR was 0.3 – 2.0 ppm. The proposed sensor demonstrated strong selectivity towards NH4+ over common cationic interferents. Furthermore, the reported FO-LPSR sensor offered a comparable measurement performance to current methods, while being low cost and portable, and allowing in-situ real-time monitoring of cation ammonium. Thus, reported FO-LPSR sensors are highly promising for water monitoring applications.

Delineation of gastrointestinal tumors biopsies using a fluorescence lifetime imaging optical fiber probe.

Autofluorescence spectroscopy has emerged in recent years as a powerful tool to report label-free contrast between normal and diseased tissues, both in vivo and ex-vivo. We report the application of an instrument employing an optical fiber probe and capable of performing real-time autofluorescence lifetime imaging at a macroscopic scale, under bright background conditions. We validate and demonstrate the practicality of this technology to discriminate healthy against neoplastic tissue in freshly excised tumor biopsies. The capability of delineating tumor margins through processing the fluorescence decays in the phasors domain was demonstrated on four different types of cancer, highlighting the broad range of potential clinical applications for the proposed approach. The presented results suggest that our autofluorescence lifetime imaging probe, together with phasor analysis, can offer a real-time tool to observe lifetime contrast on tissues and, thus, is a suitable candidate for improving in situ tissue diagnostics during surgery.

Epidural pressure measurement using a fiber-optic sensor (proof-of-principle invivo animal trial).

An increase in epidural pressure around the stenosis has been observed in patients with lumbar spinal stenosis (LSS) with positive signs of sedimentation or redundant nerve roots. Further analysis of the pressure conditions in the stenotic area would be of great interest. We hypothesized that it would be possible to determine the physiological parameters of the epidural pulse wave and its course in pathological stenosis as a basis for objective identification of LSS based on pressure using a new measuring method with continuous spatial and temporal resolution. We performed a single-case proof-of-principle invivo animal trial and used a newly developed hybrid pressure-measurement probe with a fiber-tip Fabry-Pérot interferometer and several fiber Bragg gratings (FBG). With reproducible precision, we determined the mean epidural pressure to be 7.5 mmHg and the peak-to-peak value to be 4-5 mmHg. When analyzing the pressure measured by an FBG array, both the heart and respiratory rates can be precisely determined. This study was the first to measure the pulse wave velocity of the cerebrospinal fluid pressure wave as 0.97 m/s using the newly developed pressure probe. A simulated LSS was detected in real time and located exactly. The developed fiber-optic pressure sensor probe enables a new objective measurement of epidural pressure. We confirmed our hypothesis that physiological parameters of the epidural pulse wave can be determined and that it is possible to identify an LSS.

Functional assessment of microcirculation in the injection site tissues when using local anaesthesia

Relevance. In modern dentistry, the primary criteria for successful anaesthesia are the effectiveness and safety of the anaesthetic used. These factors depend on the type of local anaesthetic and the method of its administration in the maxillofacial tissues. Studying the impact of locally anaesthetizing solutions administered by different injection techniques on the periodontal tissues is possible by recording changes in microcirculation using the LDF method.Purpose. To dynamically record the baseline microcirculation indicator in the tissues at the injection site when using various methods and means of local anaesthesia.Materials and methods. The study of changes in the microcirculation of periodontal tissues was conducted among 105 patients: 67 women and 38 men aged 25 to 56 years without periodontal pathology and comorbidities, using injection methods of anaesthesia (infiltration and modified periodontal anaesthesia) with 2% and 4% solutions of articaine with varying concentrations of vasoconstrictor. Changes in the microcirculation index were recorded at the injection site: at the root apex projection during infiltration and in the gingival papilla region during MPA, with an exposure time during LDF registration of 5 minutes. To maintain the fiber optic probe, an individual key made of C-silicone with an additional corrective layer was used for repeat positioning. The most informative indicator of the study was the magnitude of the average blood perfusion flow (M) in the time interval of registration, with its changes reflected in the study results.Results. Analysis of the dynamics of microcirculation indicators in the injection site tissues when using various methods of administering locally anaesthetizing drugs based on 2% and 4% solutions of articaine without vasoconstrictor and with epinephrine at concentrations of 1:200,000 and 1:100,000 allowed the determination of tissue ischemia depth at the injection site and the rate of blood flow restoration after anaesthesia.Conclusion. Changes in microcirculation indicators in the tissues at the injection site of the local anaesthetic depend on the concentration of the local anaesthetic and vasoconstrictor, the method of administration used, and the volume of the drug administered.

Label-Free Fiber-Optic Raman Spectroscopy for Intravascular Coronary Atherosclerosis and Plaque Detection.

The rupture of atherosclerotic plaques remains one of the leading causes of morbidity and mortality worldwide. The plaques have certain pathological characteristics including a fibrous cap, inflammation, and extensive lipid deposition in a lipid core. Various invasive and noninvasive imaging techniques can interrogate structural aspects of atheroma; however, the composition of the lipid core in coronary atherosclerosis and plaques cannot be accurately detected. Fiber-optic Raman spectroscopy has the capability of in vivo rapid and accurate biomarker detection as an emerging omics technology. Previous studies demonstrated that an intravascular Raman spectroscopic technique may assess and manage the therapeutic and medication strategies intraoperatively. The Raman spectral information identified plaque depositions consisting of lipids, triglycerides, and cholesterol esters as the major components by comparing normal region and early plaque formation region with histology. By focusing on the composition of plaques, we could identify the subgroups of plaques accurately and rapidly by Raman spectroscopy. Collectively, this fiber-optic Raman spectroscopy opens up new opportunities for coronary atherosclerosis and plaque detection, which would assist optimal surgical strategy and instant postoperative decision-making. In this paper, we will review the advancement of label-free fiber-optic Raman probe spectroscopy and its applications of coronary atherosclerosis and atherosclerotic plaque detection.

Non-uniform magnetic particle capture based on single-fiber optical tweezers

In this study, single-fiber optical tweezers are used to capture polystyrene magnetic particles with non-uniform surfaces. By preparing the tip of the optical fiber probe in the shape of a protruding cone, the laser beam is highly converged at the tip of the fiber to form a strong focused light field, and the laser beam can pass through the gap between the inorganic magnetic particles on the surface of the magnetic particles and enter into the internal polystyrene to generate a gradient force and realize the stable capture of the magnetic particles. This method provides a feasible and effective solution for the capture of non-uniform polystyrene magnetic particles using optical fiber and opens up new possibilities for research in related fields.

A temperature compensated fiber probe for highly sensitive detection in virus gene biosensing

This research presents an innovative reflective fiber optic probe structure, mutinously designed to detect H7N9 avian influenza virus gene precisely. This innovative structure skillfully combines multimode fiber (MMF) with a thin-diameter seven-core photonic crystal fiber (SCF-PCF), forming a semi-open Fabry-Pérot (FPI) cavity. This structure has demonstrated exceptional sensitivity in light intensity-refractive index (RI) response through rigorous theoretical and experimental validation. The development of a quasi-distributed parallel sensor array, which provides temperature compensation during measurements, has achieved a remarkable RI response sensitivity of up to 532.7 dB/RIU. The probe-type fiber optic sensitive unit, expertly functionalized with streptavidin, offers high specificity in detecting H7N9 avian influenza virus gene, with an impressively low detection limit of 10−2 pM. The development of this biosensor marks a significant development in biological detection, offering a practical engineering solution for achieving high sensitivity and specificity in light-intensity-modulated biosensing. Its potential for wide-ranging applications in various fields is now well-established.

Research on water equivalence and angle dependence of medical POF scintillation dosimeters

In radiation dosimetry and medical dosimetry, optical fiber dosimeters have great advantages in application due to their small size and long transmission distance. However, in some low-dose radiation environments, the water inequivalence error and angle error of optical fiber dosimeters can have significant impacts that cannot be ignored. In this paper, the effects of ray energy, ray solid angle and optical fiber probe size on water inequivalence error and angle error are analyzed by using Monte Carlo simulation. Due to the complexity of the influencing factors of the angle error, which is difficult to be analyzed precisely and quantitatively, a correction method based on BP neural network is proposed. The final validation results demonstrate that the correction scheme can reduce the total angle error of the optical fiber dosimeter to 2.72%.

Numerical Calculation and Direct Measurement of Local Hot Spot Temperatures in Transformer Clamping Plates

A verified multiphysics model is developed to simulate local hot spot temperatures in clamping structures. Stray field losses in clamping plates are obtained with the use of nonlinear impedance boundary condition through finite element method (FEM) while hot spot temperatures are simulated with the use of computational fluid dynamics (CFD). This multiphysics coupling is validated through direct measurements of local hot spot temperatures that were carried out with fiber optic temperature probes in real transformer. The local hot spot temperatures obtained with the simulations were in good agreement with the measured values, thus verifying overall approach and indirectly the calculation of local stray field losses.