Open Voltage Research Articles

Tracking dynamic deadlines in switched max-plus linear systems with uncontrollable workloads

AbstractModern safety-critical cyber-physical systems such as medical imaging equipment or autonomous vehicles need to respect strict deadlines on received data-processing workloads. These deadlines and workloads are dynamic and uncontrollable and the systems typically have only a limited discrete number of system configurations to respond to dynamic changes. The number and types of processors allocated to a data-processing task, their operating voltage and frequency, and the resolution and frequency of sensing (e.g., images) are examples of controllable configuration parameters. Guaranteeing dynamically changing deadlines under uncontrollable workloads with a limited discrete number of response options can be phrased as a multi-objective tracking problem for a switched max-plus linear system. This results in a combined scheduling and control problem. We propose an integrated state-feedback and model-predictive control solution that minimizes the number of deadline misses and the cost of implementation (e.g., energy consumption). We demonstrate the effectiveness of our approach through simulation.

Salt-Concentrated Electrolyte Constructing High Elasticity Modulus Interphase for Li-Rich Layered Oxide Cathode.

Stable electrolytes are urgently required for lithium-ion batteries based on lithium-rich layered oxides (LLOs), which generally suffer from fast capacity and voltage decay at high voltages up to 4.8 V. Herein, we report a salt-concentrated electrolyte consisting of 4 M lithium hexafluorophosphate (LiPF6) salt in ester solvents of fluoroethylene carbonate (FEC) and dimethyl carbonate (DMC) to alleviate the above challenges. The solvent structure in the 4 M electrolyte shows more volatile DMC integrated with Li+ and more free antioxidative FEC compared with a 1 M electrolyte, broadening the operation voltage. Simultaneously, this electrolyte endows a thin yet high elasticity modulus LiF-rich interphase on the LLOs surface, which can effectively prevent diverse side reactions and transition metal migration, consequently improving the electrochemical performance with a voltage decay of only 0.46 mV/cycle and capacity retention of 80.3% after 500 cycles. This simple and effective approach boosts the development of high-energy-density batteries using LLOs.

Alleviating Voltage Hysteresis by Interconnecting Truncated Octahedral LiNi0.5Mn1.5O4 Cathode Particles Using Exfoliated Graphene

AbstractHigh‐voltage spinel LiNi0.5Mn1.5O4 (LNMO) has been highlighted as one of the most promising cathode materials for next‐generation Li‐ion batteries. However, its performance is known to have shortcomings, i. e., voltage hysteresis induced by the increasing impedance of LNMO during electrochemical cycling at high voltage operation. This paper demonstrates an innovative design of LNMO cathode materials to alleviate voltage hysteresis by combining unique characteristics of truncated octahedral LNMO with 2D exfoliated graphene (EG). The exposed (100) plane of truncated LNMO particles is known to have superior Li+ ion conduction. Meanwhile, the (111) plane is known to have excellent resistance to metal dissolution. Moreover, it was revealed that the presence of the EG framework as an interconnection aide could significantly improve the charge transfer process, helping to alleviate the voltage polarization. The sample with optimum LNMO‐EG composition shows a stable electrochemical performance with a capacity retention of 86.56 % after 300 cycles of charge‐discharge measurement at 1 C while exhibiting almost 3 times lower voltage hysteresis (0.233 mV/cycle) compared to the pristine LNMO (0.678 mV/cycle). This result demonstrates that combining the uniqueness of truncated LNMO and 2D EG can be a promising strategy to improve the electrochemical performance of LNMO cathode materials for next‐generation batteries.

Waxberry-like TiO2 with Synergistic Surface Modification of Pyrolytic Carbon Coating and Carbon Nanotubes as an Anode for Li-Ion Battery.

Titanium dioxide (TiO2) as an anode material for lithium-ion batteries (LIBs) has the advantages of tiny volume expansion, high operating voltage, and outstanding safety performance. However, due to the low conductivity of TiO2 and the slow diffusion rate of lithium ions (Li+), it is limited in the application of LIBs. Therefore, waxberry-like TiO2 comodified by pyrolytic carbon coating and carbon nanotubes was prepared in this work. The waxberry-like TiO2 with nanorods on its surface shortens the diffusion distance of Li+. Carbon nanotubes and waxberry-like TiO2 are tightly combined through electrostatic assembly and form a cross-linked conductive network to provide more electron transmission paths. A thin layer of pyrolytic carbon wraps carbon nanotubes and waxberry-like TiO2, which enhance the conductivity of the composites and ensure the structural integrity of the materials throughout the cycling process. The experimental data revealed that the discharge-specific capacity of TiO2@CNT@C is 170.5 mAh g-1 after 3000 cycles at a large current density of 5 A g-1, and the discharge-specific capacity is still 143 mAh g-1 at the superhigh rate of 10 A g-1, which provides excellent rate performance and cyclic stability. The efficient dual-carbon modification strategy could potentially be extended to other materials.

Challenges and Modification Strategies on High-Voltage Layered Oxide Cathode for Sodium-Ion Batteries.

Sodium-ion batteries (SIBs) have attracted great attention due to their advantages on resource abundance, cost and safety. Layered oxide cathodes (LOCs) of SIBs possess high theoretical capacity, facile synthesis and low cost, and are promising candidates for large scale energy storage application. Increasing operating voltage is an effective strategy to achieve higher specific capacity and also high energy density of SIBs. However, at high operating voltages, LOCs will undergo a series of phase transitions in bulk phase, leading to huge change of volume and layer spacings accompanied by severe lattice stress and cracking formation. Degeneration of surface also occurs between LOCs and electrolytes, resulting in sustained growth of cathode electrolyte interphase (CEI) and release of O2 and CO2. These induce structural destruction and electrochemical performance degradation in high voltage regions. Recently, many strategies have been proposed to improve electrochemical performance of LOCs under high voltages, including bulk element doping, structural design, surface coating and gradient doping. This review describes pivotal challenges and occurrence mechanisms at high voltages, and summarizes strategies to improve stability of bulk and surface. Viewpoints will be provided to promote development of high energy density SIBs.

High-κ monocrystalline dielectrics for low-power two-dimensional electronics.

The downscaling of complementary metal-oxide-semiconductor technology has produced breakthroughs in electronics, but more extreme scaling has hit a wall of device performance degradation. One key challenge is the development of insulators with high dielectric constant, wide bandgap and high tunnel masses. Here, we show that two-dimensional monocrystalline gadolinium pentoxide, which is devised through combining particle swarm optimization algorithm and theoretical calculations and synthesized via van der Waals epitaxy, could exhibit a high dielectric constant of ~25.5 and a wide bandgap simultaneously. A desirable equivalent oxide thickness down to 1 nm with an ultralow leakage current of ~10-4 A cm-2 even at 5 MV cm-1 is achieved. The molybdenum disulfide transistors gated by gadolinium pentoxide exhibit high on/off ratios over 108 and near-Boltzmann-limit subthreshold swing at an operation voltage of 0.5 V. We also constructed inverter circuits with high gain and nanowatt power consumption. This reliable approach to integrating ultrathin monocrystalline insulators paves the way to future nanoelectronics.

Synthesis of Trisiloxane with the Dioxaborolane Group as a Cathode Film-Forming Electrolyte Additive for High-Temperature LiMn2O4/Li4Ti5O12 Batteries.

LiMn2O4 batteries have been widely applied as various portable electronic devices and electric vehicles owing to the merits of low cost, high operating voltage, excellent rate capability, and environmental friendliness. However, the poor performance at elevated temperatures remains a serious technical challenge in terms of commercial application purposes. A borate-containing trisiloxane compound of TSMBO is designed and synthesized as a cathode film-forming electrolyte additive to improve the electrochemical performances of LiMn2O4/Li4Ti5O12 batteries, especially at high temperatures of 55 °C. Atomic force microscopy measurement confirms that the trisiloxane moiety in TSMBO can construct a cathode electrolyte interface (CEI) with higher mechanical strength and better flatness compared to the disiloxane moiety in the TSMBO analogue with a similar chemical structure. The robust CEI film on the surface of the LiMn2O4 cathode and the inhibited hydrolysis of LiPF6 in the electrolyte significantly suppress the dissolution of Mn from the LiMn2O4 cathode and maintain the structural integrity of the LiMn2O4 lattice over cycling. Thus, the LiMn2O4/Li4Ti5O12 coin cell using the TSMBO-containing electrolyte with an optimized addition level of 0.5 wt % exhibits a higher capacity retention of 49.3% compared with 34.3% for the baseline electrolyte after 300 cycles under 1C rate at 55 °C. The LiMn2O4/Li4Ti5O12 pouch cell tests show excellent high-temperature and cycling performance at 55 °C and a higher capacity retention of 90.4% after 500 cycles at 2C compared to 79.7% for that with the baseline electrolyte after 430 cycles at 2C. This work demonstrates that TSMBO is a promising electrolyte additive for practical use to improve the cycling stability of LiMn2O4/Li4Ti5O12 batteries at elevated temperatures.

Kinetics Enhancement of High‐Voltage LCO via In‐Situ Formed Cyanide‐Rich Polymer Interfaces

AbstractLithium cobalt oxide (LiCoO2) is widely used as cathode material for lithium‐ion batteries due to its high operation voltage and high specific capacity. However, conventional LiCoO2 (LCO) undergoes severe structural phase transitions and compositional changes at high voltage (>4.4 V) leading to failure. Herein, a multifunctional crosslinked polymer interface is insitu formed on LCO particles, which can build a nanoscale conformal coating layer on the interface of LCO, preventing the side reaction with the electrolyte. Moreover, thanks to its high‐voltage talerances and high Li+ conductivity, the in‐situ polymerized interface has excellent high‐voltage stability and Li+ transport kinetics, which significantly improves the electrochemical performances of LCO at 4.55 or 4.6 V. This study confirms the feasibility of in situ polymer modification of LCO, providing new ideas and methods for the structural stabilization and performance enhancement of high‐voltage lithium cobalt oxides.

Enhanced voltage management method based on hybrid transformer for wind power integration applications

The rapid voltage fluctuations and even exceedances caused by power variability of wind generations significantly impede their application within the power system. This paper presents a method for replacing the electromagnetic transformer at the Point of Common Coupling of wind power delivery systems with a hybrid transformer (HT) to enhance its voltage management and grid integration capabilities. Considering the operation voltage in wind farm and scalability, a cascaded H-bridge based HT model has been established. The operation modes and a set of control strategies groups have been analyzed and proposed. The HTs operate by default in reactive power compensation mode to manage the dual-side voltage coordinately. In case of reactive power contention and circulation, this paper proposes an additional reactive power circulation suppression method. Once it exceeds the reactive voltage regulation limits due to the grid faults or changes of gird operation modes, HT adopts ratio fast regulation mode, maintaining the wind-farm side node voltage and preventing wind turbine tripping. The influence of HT leakage reactance has also been studied here. Finally, the effectiveness of the proposed method is validated in simulation, which provides a new paradigm for the operational application of HTs.

HAO + Al2O3 FeFET Gate-Stack for Overall Improvement in Operating Voltage, Endurance, and Retention

HAO + Al₂O₃ FeFET Gate-Stack for Overall Improvement in Operating Voltage, Endurance, and Retention

Electrochemical HOCl Production Modeling for an Electrochemical Catheter.

Hypochlorous acid (HOCl) is a strong oxidizing agent that damages cells by interacting with lipids, nucleic acids, sulfur-containing amino acids, and membrane components. It is an endogenous substance produced by the immune system to protect mammals from pathogens. Previously, we developed an HOCl-generating electrochemical catheter (e-catheter) and demonstrated its ability to prevent central line-associated bloodstream infections. The e-catheter is an electrochemical system consisting of two parts - an e-hub and a tube. Working, counter, and reference electrodes are placed in the e-hub, which contains 0.9% NaCl as an electrolyte. Although a prototype of this device has shown activity against pathogens, it is helpful to understand the factors influencing associated electrochemical/chemical processes to optimize design and efficacy. A mathematical model could predict factors influencing HOCl generation and distribution in the catheter and could aid in optimizing these devices. Here, we developed an Electrochemical Hypochlorous Acid Production (EHAP) model to predict factors influencing electrochemical generation and distribution of HOCl in e-catheters, including polarization time, diffusion of HOCl into the e-catheter, operational voltage, working electrode length, and surface area.

Characterizing a device for easy simulation of compression waves induced by trains passing through tunnels

When a high-speed train enters a tunnel, an initial compression wave (ICW) is generated, which radiates out as it propagates lengthways through the tunnel to the exit, forming an uncomfortable micro-pressure wave (MPW). The aim of this research is to develop a scaled device to quickly simulate this aerodynamic phenomenon. Our device achieves this by using the instantaneous release of high-pressure air in the chamber. In the first part of the paper, the reliability of this device is verified by various methods, including an airtightness check, calibration of transducers, and repeatability experiments. Next, the mapping of the parameters of the device to engineering values is discussed. The propagation process of the ICW and the pressure fluctuations in the tunnel are then analyzed, and the discussion centers around a control variable case. Finally, the MPW generated near the tunnel exit is explored and acoustically evaluated. It is found that the initial pressure in the chamber, the opening voltage, and the number of solenoid valves in the experiment can be mapped to the train speed, the characteristic length of train nose, and the blockage ratio, respectively. When the pressure amplitude of the ICW is higher, there will be a certain steepening phenomenon in the propagation process. The pressure fluctuation cycle in the tunnel is calculated as 4× tunnel length/wave velocity, and the amplitude of fluctuation decays exponentially over the cycles. In most cases, the sound pressure level of MPWs near the tunnel exit exceeds the hearing threshold, based on the auditory properties of the human ear.

In-situ synthesis AgO/AgNPs composite as binder-free cathode for high-performance aqueous AgO-Al batteries

Aqueous AgO-Al batteries are promising systems due to their ultrahigh specific capacity, energy density, and stable output voltage. However, they still suffer from the low utilization and sluggish kinetics of the cathode. In this study, the binder-free AgO/AgNPs composites were synthesized in-situ using a simple electrodeposition method. Due to the excellent conductivity and rich mesoporous structure of AgO/AgNPs materials, the electron and ion transfer kinetics were enhanced, thereby improving the charge storage performance of the electrode. As expected, the AgO-Al battery with the optimized AgO/AgNPs composite cathode demonstrated excellent rate performance, achieving a high discharge capacity of 325.1 mAh g−1, and a stable operating voltage platform of 1.55 V at the current density of 1000 mA cm−2. The maximum energy and power density were 687 Wh kg−1 and 6.2 kW kg−1, respectively. This work presents an effective strategy for designing high-performance AgO electrode materials for AgO-Al batteries.

One-pot synthesis of hydroxypropyl methylcellulose-based gel polymer electrolytes for high-performance supercapacitors

The electrolyte is a crucial component that significantly affects the electrochemical performance of supercapacitors. The hydroxypropyl methylcellulose (HPMC)-based gel polymer electrolyte (GPE) with high operating voltage was synthesized via an innovative “one-pot” method in this study, and the impacts of organic solvent/water ratio and LiNO3 concentration on gelation and conductivity of the GPE were investigated systematically. Under the optimal condition with a DMF/water ratio of 10:0 and the incorporation of 7 % LiNO3, the ionic conductivity reached 1.06 S m−1. Integrated into symmetric supercapacitors, the HPMC-based GPE demonstrated an expanded electrochemical window of 2.7 V. It also possessed a specific capacitance of 115.8 F g−1 at 1.0 A g−1, an energy density of 29.31 Wh kg−1, and outstanding cyclic stability, retaining 86 % of its initial capacitance after 2000 cycles. Through cyclic stability tests under pressure conditions, the assembled flexible supercapacitors were able to maintain capacitance retention of 60 % and coulombic efficiency of 97 %. This work offers a streamlined synthesis for HPMC-based GPE with superior electrochemical properties, which exhibits its potential in advancing supercapacitor technology for flexible electronics.

Hierarchical structural design of cobalt sulphide nanoparticles/nickel sulphide for high-performance supercapacitors

Metal-organic framework (MOF) materials have become increasingly attractive in supercapacitor electrode research because of their regular crystal topology and tunable pore distribution. The strategy for the synthesis of the Ni3S4/Co3S4 electrode material with a layered structure was successfully devised using the layered Ni-MOF as a template and precursor. The characterisation techniques of XRD, FTIR, XPS, SEM, TEM and BET have provided confirmation of the assertion that the Ni3S4/Co3S4 composites exhibit an advanced hierarchical pore structure and considerable specific surface area. The specific capacity of the Ni3S4/Co3S4 composite is as high as 122.8 mAh g−1, and it can still maintain 72.6 % of the specific capacity after 3,000 cycles. Furthermore, the SEM morphology remains largely unchanged after cycling, which demonstrates excellent stability. Moreover, honeycomb-shape porous carbon (N-HAPC) with ultra-high specific surface area was selected as negative electrode material to fabricate a novel hybrid supercapacitor (Ni3S4/Co3S4//N-HAPC), which exhibits a broad operational voltage range of 1.6 V and superior energy density of 28.6 Wh kg−1. Simultaneously, HSCs exhibited remarkable charge-discharge stability, exhibiting a mere 17.2 % decline in capacitance stability following 7,000 GCD cycles. The combination of two Ni3S4/Co3S4//N-HAPC HSCs in series has been demonstrated to be capable of illuminating a small LED lamp, indicating the potential for their use in practical applications. Furthermore, this approach offers a novel strategy for the structural design of MOF-like materials.

Insights into Tiny High‐Entropy Doping Promising Efficient Sodium Storage of Na3V2(PO4)2O2F toward Sodium‐Ion Batteries

AbstractBoth high operation voltage and theoretical capacity promise polyanion‐type fluorophosphate Na3V2(PO4)2O2F as a competitive cathode toward high‐energy‐density sodium‐ion batteries (SIBs). However, the intrinsic low kinetic characteristics seriously influence its high‐power property and service life. To well address this, a creative tiny high‐entropy (HE) doping methodology is purposefully developed to fabricate nanoscale Na3V1.94(Cr, Mn, Co, Ni, Cu)0.06(PO4)3O2F (NVPOF‐HE) as the advanced cathode materials for SIBs. The grain refinement effect induced by collaborative regulations from polyvinyl pyrrolidone and tiny HE heteroatomic doping is reasonably proposed for nanosizing particle dimension of NVPOF‐HE. Systematic experiments and theoretical calculations authenticate that the HE doping efficiently promotes the electronic/ionic transport and high‐voltage capacity contribution, and weakens the lattice expansion over Na+‐(de)intercalation processes. Thanks to the appealing virtues mentioned here, the nano NVPOF‐HE, compared to single‐ion/dual‐ion/triple‐ion doped cases, achieves even better Na+‐storage performance in terms of both high‐rate capacities and long‐term cycling stability. Furthermore, the NVPOF‐HE assembled full SIBs deliver a high materials‐level energy density of 463 Wh kg−1 and electrochemical stability of ≈93.8% capacity retention after 1000 cycles at 5 C rate. More essentially, the fundamental insights gained here provide a significant scientific and technological advancement in high‐performance and durable polyanionic cathodes toward next‐generation SIBs.

Fully biodegradable electrochromic display for disposable patch

Flexible and biodegradable electronics have emerged as a promising solution for escalating electronic waste issue caused by the rapid development of skin patch electronics. Fully biodegradable displays are essential for visualizing biological/physical/chemical/electrochemical signals measured by a wide range of skin patch electronics. Here we propose fully biodegradable electrochromic display providing low operating voltage and low power consumption. The biodegradable transparent conductive electrode was fabricated by transferring free-standing tungsten nanomesh onto poly lactic-co-glycolic acid substrate using electrospinning templating, minimizing damage to the substrate. Electrochromic layer was tungsten oxide which is biodegradable, and a ferrocyanide/ferricyanide redox agent was utilized as a counter electrode reaction to enhance operational stability in an aqueous electrolyte by reducing operating voltage and side reactions. This display successfully visualized diverse signals from various biodegradable electronics such as UV sensors and electrochemical transistors, and finally underwent eco-friendly degradation in phosphate-buffered saline or soil under mild conditions.

High-Performance Organic Field-Effect Transistors and Inverters with Good Flexibility and Low Operating Voltage.

Organic field-effect transistors (OFETs) with good flexibility and low operating voltage, are of great meaning for the low power stretchable and wearable electronic devices. The operating voltage and flexibility are easily affected by the dielectric layers in the OFETs. Bilayer dielectrics comprising both high- and low-permittivity (k) insulating polymers, have been reported. The flexible bilayer dielectrics can combine the advantages of both insulating polymers, which are high charge carriers from low-k polymers and low operating voltage from high-k polymers. However, the effect of film thicknesses in the bilayer dielectrics on the OFET performance is seldom investigated. Here, bilayer dielectrics comprising high-k polyvinyl alcohol (PVA) and low-k polymethylmethacrylate (PMMA) were fabricated. And PVA/PMMA bilayers with three different PVA film thicknesses are carefully investigated. The 300 nm PVA/100 nm PMMA bilayer dielectric makes the pentacene OFETs show the highest hole mobility of 1.24 cm2V-1s-1 and the corresponding inverters give a high voltage gain of 40 and a noise margin of 2.3 V (77% of 1/2 VDD) at low operating voltage of 6 V. Both the pentacene transistors and the inverters still work properly under bending radium of 5.85 mm, proving the good prospects of the PVA/PMMA bilayer dielectric in practical applications.

Oxygen Reduction Reaction Coupled Electro‐Oxidation for Highly‐Efficient and Sustainable Water Treatment

AbstractElectro‐oxidation (EO) technology demonstrates significant potential in wastewater treatment. However, the high energy consumption has become a pivotal constraint hindering its large‐scale implementation. Herein, we design an EO and 4‐electron oxygen reduction reaction coupled system (EO‐4eORR) to replace the traditional EO and hydrogen evolution reaction (HER) coupled system (EO‐HER). The theoretical cathodic potential of the electrolytic reactor is tuned from 0 V (vs. RHE) in HER to 1.23 V (vs. RHE) in 4eORR, which greatly decreases the required operation voltage of the reactor. Moreover, we demonstrate that convection can improve the mass transfer of oxygen and organic pollutants in the reaction system, leading to low cathodic polarization and high pollutant removal rate. Compared with traditional EO‐HER system, the energy consumption of the EO‐4eORR system under air aeration for 95 % total organic carbon (TOC) removal is greatly decreased to 2.61 kWh/kgTOC (only consider the electrolyzer energy consumption), which is superior to previously reported EO‐based water treatment systems. The reported results in this study offer a new technical mode for development of highly efficient and sustainable EO‐based treatment systems to remove organic pollutants in waste water.

The Development and Prospect of Stable Polyanion Compound Cathodes in LIBs and Promising Complementers.

Cathode materials are usually the key to determining battery capacity, suitable cathode materials are an important prerequisite to meet the needs of large-scale energy storage systems in the future. Polyanionic compounds have significant advantages in metal ion storage, such as high operating voltage, excellent structural stability, safety, low cost, and environmental friendliness, and can be excellent cathode options for rechargeable metal-ion batteries. Although some polyanionic compounds have been commercialized, there are still some shortcomings in electronic conductivity, reversible specific capacity, and rate performance, which obviously limits the development of polyanionic compound cathodes in large-scale energy storage systems. Up to now, many strategies including structural design, ion doping, surface coating, and electrolyte optimization have been explored to improve the above defects. Based on the above contents, this paper briefly reviews the research progress and optimization strategies of typical polyanionic compound cathodes in the fields of lithium-ion batteries (LIBs) and other promising metal ion batteries (sodium ion batteries (SIBs), potassium ion batteries (PIBs), magnesium ion batteries (MIBs), calcium ion batteries (CIBs), zinc ion batteries (ZIBs), aluminum ion batteries (AIBs), etc.), aiming to provide a valuable reference for accelerating the commercial application of polyanionic compound cathodes in rechargeable battery systems.