On-line Mass Spectrometric Analysis Research Articles

Enabling Field Asymmetric Ion Mobility Spectrometry Separation of Fentanyl-Related Compounds Using Controlled Humidity.

Due to the widespread abuse of opioids in recent years, the development of quick and reliable methods for analyzing compounds such as fentanyl and its derivatives is increasingly important. Ahead of online mass spectrometric analysis, field asymmetric ion mobility spectrometry (FAIMS) has previously been used for rapid ion prefiltering and demonstrated significantly improved peak capacity with the addition of vapor modifiers to the carrier gas. The application of FAIMS-mass spectrometry (MS) in the analysis of fentanyl and related compounds is presented herein with the use of a water vapor modifier. The inclusion of the water vapor modifier to the FAIMS methodology is made more robust with the incorporation of a humidity sensor. A dramatic improvement in the separation of fentanyl, alfentanil, 4-aminophenyl-1-phenethylpiperidine (4-ANPP), norfentanyl, and heroin has been achieved, and the ability to distinguish the isobars in a mixture, alfentanil and ortho-isopropyl furanyl fentanyl, is demonstrated without lengthy chromatography.

Single-cell identification by microfluidic-based in situ extracting and online mass spectrometric analysis of phospholipids expression.

This work describes a microfluidic system for in situ extraction of a single-cell and its phosphatidylcholine analysis through mass spectrometry. This approach uncovered cellular heterogeneity among seemingly identical cells and provided a new platform for identification and classification of cells.

Simple 3D printed stainless steel microreactors for online mass spectrometric analysis

A simple flow chemistry microreactor with an electrospray ionization tip for real time mass spectrometric reaction monitoring is introduced. The microreactor was fabricated by a laser-based additive manufacturing technique from acid-resistant stainless steel 316L. The functionality of the microreactor was investigated by using an inverse electron demand Diels-Alder and subsequent retro Diels-Alder reaction for testing. Challenges and problems encountered are discussed and improvements proposed. Adsorption of reagents to the rough stainless steel channel walls, short length of the reaction channel, and making a proper ESI tip present challenges, but the microreactor is potentially useful as a disposable device.

Highly Permeable Matrimid®/PIM-EA(H₂)-TB Blend Membrane for Gas Separation.

The effect on the gas transport properties of Matrimid®5218 of blending with the polymer of intrinsic microporosity PIM-EA(H2)-TB was studied by pure and mixed gas permeation measurements. Membranes of the two neat polymers and their 50/50 wt % blend were prepared by solution casting from a dilute solution in dichloromethane. The pure gas permeability and diffusion coefficients of H2, He, O2, N2, CO2 and CH4 were determined by the time lag method in a traditional fixed volume gas permeation setup. Mixed gas permeability measurements with a 35/65 vol % CO2/CH4 mixture and a 15/85 vol % CO2/N2 mixture were performed on a novel variable volume setup with on-line mass spectrometric analysis of the permeate composition, with the unique feature that it is also able to determine the mixed gas diffusion coefficients. It was found that the permeability of Matrimid increased approximately 20-fold with the addition of 50 wt % PIM-EA(H2)-TB. Mixed gas permeation measurements showed a slightly stronger pressure dependence for selectivity of separation of the CO2/CH4 mixture as compared to the CO2/N2 mixture, particularly for both the blended membrane and the pure PIM. The mixed gas selectivity was slightly higher than for pure gases, and although N2 and CH4 diffusion coefficients strongly increase in the presence of CO2, their solubility is dramatically reduced as a result of competitive sorption. A full analysis is provided of the difference between the pure and mixed gas transport parameters of PIM-EA(H2)-TB, Matrimid®5218 and their 50:50 wt % blend, including unique mixed gas diffusion coefficients.

Size-exclusion chromatography using reverse-phase columns for protein separation

Reverse-phase (RP) liquid chromatography (RPLC) and size-exclusion chromatography (SEC) are methods commonly used for protein/peptide separation, and they are based on distinct principles. This study develops a method using RP columns for size-based separation of protein mixtures. Results show that high concentrations of acetonitrile with trifluoroacetic acid as an acid modifier successfully suppressed interactions between proteins and the stationary phase and allowed the RP column to act as a SEC column to separate proteins based on their molecular weight. The reduction of protein disulfide bonds resulted in an improved correlation between the retention time and molecular weight in the RP-based SEC, which indicates that conformation-dependent SEC retention is less important for disulfide-reduced proteins using a current mobile phase. Importantly, the employed salt-free mobile phase allowed the RP-based SEC system to be directly coupled with online mass spectrometry (MS) analysis. Furthermore, by reducing the flow rate and increasing the column length, the separation efficiency was further improved and no adverse effects due to the prolonged separation were observed, which indicates the potential of this strategy to serve as a first-dimensional separation method for constructing an online multi-dimensional LC system. The size-based separation phenomenon with RP columns was further evaluated using a complex protein mixture (a cell lysate), and compared to conventional SEC, more proteins of the cell lysate were observed following the SEC separation principle, which implies the better generality of usage of the RP-based SEC method for protein separation. In summary, results show that the RP-based SEC is highly efficient in achieving protein fractionation. In addition, the employed salt-free mobile phase provides excellent compatibility of the RP-based SEC with other separation strategies or online mass spectrometric analysis. We anticipate that laboratories using RP-HPLC for protein separation will easily be able to move to the size-based separation mode using the same RP-HPLC system.

Online analysis of secondary organic aerosols from OH-initiated photooxidation and ozonolysis of α-pinene, β-pinene, Δ3-carene and d-limonene by thermal desorption–photoionisation aerosol mass spectrometry

Environmental contextSecondary organic aerosol, formed by oxidation of volatile precursors such as monoterpenes, is a major contributor to the total atmospheric organic aerosol. We focus on the online mass spectrometric analysis of the aerosol generated by oxidation products of four major monoterpenes in an environmental chamber. Numerous important monoterpene oxidation products were clearly observed and provided a direct comparison of the formation of biogenic secondary organic aerosols. AbstractWe present here thermal desorption–tunable vacuum ultraviolet time-of-flight photoionisation aerosol mass spectrometry (TD-VUV-TOF-PIAMS) for online analysis of biogenic secondary organic aerosols (BSOAs) formed from OH-initiated photooxidation and dark ozonolysis of α-pinene, β-pinene, Δ3-carene and d-limonene in smog chamber experiments. The ‘soft’ ionisation at near-threshold photon energies (≤10.5eV) used in this study permits direct measurement of the fairly clean mass spectra, facilitating molecular identification. The online BSOA mass spectra compared well with previous offline measurements and most of the important monoterpene oxidation products were clearly found in the online mass spectra. Oxidation products such as monoterpene-derived acids (e.g. pinic acid, pinonic acid, 3-caronic acid, limononic acid, limonalic acid), ketones (e.g. norpinone, limonaketone), aldehydes (e.g. caronaldehyde, norcaronaldehyde, limononaldehyde) and multifunctional organics (e.g. hydroxypinonaldehydes, hydroxy-3-caronic aldehydes, hydroxylimononic acid) were tentatively identified. The online TD-VUV-TOF-PIAMS mass spectra showed that the OH-initiated photooxidation and ozonolysis of the same monoterpenes produced some similar BSOA products; for example, 3-caric acid, 3-caronic acid, 3-norcaronic acid, 3-norcaralic acid, caronaldehyde and norcaronaldehyde were observed in both photooxidation and ozonolysis of Δ3-carene. However, they could be formed through different pathways. Some of the same products and isomers (e.g. 10-oxopinonic acid, pinonic acid, norpinic acid, hydroxyl pinonaldehyde, norpinonic acid, norpinone) were formed during the photooxidation and ozonolysis of α-pinene and β-pinene. However, several different BSOA products were generated in these photooxidation and ozonolysis reactions due to their different parent structures. The OH–monoterpene reaction generated higher-molecular-weight products than O3–monoterpene owing to multiple OH additions to the unsaturated carbon bond. The online observation of key BSOA products provided a direct comparison of BSOA formation among different monoterpenes and insights into the formation pathways in the OH-initiated photooxidation and ozonolysis of monoterpenes.

Looking into individual coffee beans during the roasting process: direct micro-probe sampling on-line photo-ionisation mass spectrometric analysis of coffee roasting gases

A micro-probe (μ-probe) gas sampling device for on-line analysis of gases evolving in confined, small objects by single-photon ionisation time-of-flight mass spectrometry (SPI-TOFMS) was developed. The technique is applied for the first time in a feasibility study to record the formation of volatile and flavour compounds during the roasting process within (inside) or in the direct vicinity (outside) of individual coffee beans. A real-time on-line analysis of evolving volatile and semi-volatile organic compounds (VOC and SVOC) as they are formed under the mild pyrolytic conditions of the roasting process was performed. The soft-ionisation mass spectra depict a molecular ion signature, which is well corresponding with the existing knowledge of coffee roasting and evolving compounds. Additionally, thereby it is possible to discriminate between Coffea arabica (Arabica) and Coffea canephora (Robusta). The recognized differences in the roasting gas profiles reflect the differences in the precursor composition of the coffee cultivars very well. Furthermore, a well-known set of marker compounds for Arabica and Robusta, namely the lipids kahweol and cafestol (detected in their dehydrated form at m/z 296 and m/z 298, respectively) were observed. If the variation in time of different compounds is observed, distinctly different evolution behaviours were detected. Here, phenol (m/z 94) and caffeine (m/z 194) are exemplary chosen, whereas phenol shows very sharp emission peaks, caffeine do not have this highly transient behaviour. Finally, the changes of the chemical signature as a function of the roasting time, the influence of sampling position (inside, outside) and cultivar (Arabica, Robusta) is investigated by multivariate statistics (PCA). In summary, this pilot study demonstrates the high potential of the measurement technique to enhance the fundamental knowledge of the formation processes of volatile and semi-volatile flavour compounds inside the individual coffee bean.

Reversed-phase liquid-chromatographic mass spectrometric N-glycan analysis of biopharmaceuticals

N-Glycosylation is a common post-translational modification of monoclonal antibodies with a potential effect on the efficacy and safety of the drugs; detailed knowledge about this glycosylation is therefore crucial. We have developed a reversed-phase liquid chromatographic–mass spectrometric method, with different fluorescent labels, for analysis of N-glycosylation, and compared the sensitivity and selectivity of the methods. Our work demonstrates that anthranilic acid as fluorescent label in combination with reversed-phase liquid chromatography–mass spectrometry is an advantageous method for identification and quantification of neutral and acidic N-glycans. Our results show that mass spectrometry-based quantification correlates with quantification by fluorescence. Chromatographic discrimination between several structural glycan isomers was achieved. The sharp peaks of the eluting anthranilic acid-labeled N-glycans enabled on-line mass spectrometric analysis of even low-abundance glycan species. The method is broadly applicable to N-glycan analysis and is an orthogonal analytical method to the widely established hydrophilic-interaction liquid chromatography of 2-aminobenzamide-labeled N-glycans for characterization of N-glycans derived from biopharmaceuticals.

Facile identification of photocleavable reactive metabolites and oxidative stress biomarkers in proteins via mass spectrometry

Described herein is a method which combines bond selective fragmentation by photodissociation with online liquid chromatographic separation and mass spectrometric analysis. Photoexcitation of proteins or peptides with 266-nm light does not normally yield abundant fragmentation; however, incorporation of a suitable carbon-sulfur or carbon-halogen bond that is proximal to a chromophore allows access to direct dissociation pathways, resulting in homolytic cleavage of these bonds. Radicals generated through this process can cause further dissociation of the peptide backbone, which is useful for site specifically identifying the point of modification. Two specific applications of this technique for peptide analysis in model systems are presented: (1) identification of reactive metabolites which covalently modify cysteine residues, and (2) characterization of halogenated tyrosine residues which are biomarkers related to oxidative stress. In both cases, these naturally occurring post translational modifications create photocleavable bonds which can be fragmented by 266-nm light. The selectivity offered by photodissociation allows facile identification of the peptides of interest even in complex mixtures, and subsequent selective radical directed backbone fragmentation pinpoints the site of modification. This combination greatly simplifies data analysis and provides more confident assignments.

On-line mass spectrometric analysis of sulfur compounds in hydrothermal process of durian and vegetables

In this work is presented online monitoring of gasification of durian (Durio zibethinus), onion (Allium cepa L.) and garlic (Allium sativum L.) as real biomasses containing sulfuric compounds, in sub and near critical water (250, 300 and 350°C) by Lithium Ion Attachment Mass Spectrometry. Seven sulfuric compounds were detected in the resulting gas phase: H2S, ethanethiol, 1-propanethiol, methyl phenyl disulfide, propyl disulfide, diethyl trisulfide and dipropyl trisulfide gases. Allicin and alliin were successfully detected from onion and garlic samples. The effect of the subcritical conditions used on the release of sulfur heteroatomic compounds from real biomass was examined. Ca(OH)2 was adopted as an alkali reagent to suppress the emission of sulfuric compounds to the gas phase. Extraction was promoted and decomposition processes were observed for durian when Ca(OH)2 was added. For onion and garlic samples the decomposition process was prevailing with the addition of Ca(OH)2.

Local Catalyst Support Degradation during Polymer Electrolyte Fuel Cell Start-Up and Shutdown

Fuel cell start-up and shutdown can induce high potentials at the cathode, leading to carbon corrosion and platinum dissolution. In technical cells with large active area the degradation processes are inhomogeneous along the flow field, therefore a fundamental understanding in local corrosion is required. Local carbon corrosion is determined from CO2 emissions measured locally along the cathode channel by in-situ and online mass spectrometric analysis of the reactant gas. Mass spectrometry data is in line with local limiting current measurements and SEM imaging. For complete start/stop cycles carbon corrosion is highest at the hydrogen outlet, followed by the inlet and lowest in the center of the flow field. This spatial inhomogeneity can be explained by the combined effects of diffusive mass transport limitations in the gas diffusion electrode and the pseudo-capacity of the platinum electro-catalyst. A model is presented, explaining opposite findings in the literature by the relative importance of the mass transport effect in different flow field geometries. Cell temperature, relative humidity of the gases and the purging gas velocity influence the relative carbon loss differences along-the-channel. Inhomogeneities up to a factor of 4 are observed and are most prominent at begin of life.

A High‐Throughput UPLC Method for the Characterization of Chemical Modifications in Monoclonal Antibody Molecules

Development of high-throughput release and characterization assays is critical for the effective support of the rapidly growing biologics pipeline for biotherapeutics. Clipping of polypeptide chains is commonly monitored during process optimization, formulation development, and stability studies. A reduced capillary electrophoresis-sodium dodecyl sulfate (rCE -SDS) method is often used as a purity release assay for monitoring clips in monoclonal antibodies (mAbs); however, it has a cycle time of approximately 40 min, which is not suited for high-throughput screening. Additionally, the characterization of clips and variants from electropherograms is not straightforward and takes significant time. Reduced reversed-phase (RP) chromatography has been a popular assay for the characterization and identification of clips and variants because it can be directly coupled with online mass spectrometric analysis. However, the high-column temperature and low pH required for RP assays can induce on-column cleavage and therefore skew the results. To minimize on-column degradation, we have developed a high-throughput method with a significantly shorter cycle time of 5 min. The short cycle time was achieved using an ultra-high-pressure liquid chromatography (UPLC) system with a 1.7 μm phenyl column. This UPLC method allowed quantitation of hinge clipping in an IgG1 molecule and acid induced aspartic acid/proline (D/P) clip in an IgG2 molecule. The results from the UPLC method were comparable to those obtained with rCE-SDS. Additionally, the phenyl column offered partial resolution of oxidation and other chemical modifications, making this technique an attractive assay for high-throughput process characterization and formulation screens.

Analysis of Glycosaminoglycans Using Mass Spectrometry.

The glycosaminoglycans (GAGs) are linear polysaccharides expressed on animal cell surfaces and in extracellular matrices. Their biosynthesis is under complex control and confers a domain structure that is essential to their ability to bind to protein partners. Key to understanding the functions of GAGs are methods to determine accurately and rapidly patterns of sulfation, acetylation and uronic acid epimerization that correlate with protein binding or other biological activities. Mass spectrometry (MS) is particularly suitable for the analysis of GAGs for biomedical purposes. Using modern ionization techniques it is possible to accurately determine molecular weights of GAG oligosaccharides and their distributions within a mixture. Methods for direct interfacing with liquid chromatography have been developed to permit online mass spectrometric analysis of GAGs. New tandem mass spectrometric methods for fine structure determination of GAGs are emerging. This review summarizes MS-based approaches for analysis of GAGs, including tissue extraction and chromatographic methods compatible with LC/MS and tandem MS.

Characterization of surgical aerosols by the compact single-particle mass spectrometer LAMPAS 3

A new method is presented using an optical particle counter and the compact mobile laser mass spectrometer LAMPAS 3 for in situ analysis of single particles generated by electrosurgical dissection of biological tissues. The instrumental performance is demonstrated for analysing aerosol particles formed during rapid thermal evaporation of porcine liver and porcine kidney tissues. Particle number concentrations of up to 5,000 particles per cubic centimetre were detected during surgical dissection. Chemical analysis of tissue particles was performed by bipolar time-of-flight mass spectrometry. The application of an online mass spectrometric particle analysis for surgical aerosols is reported here for the first time.

Accurate Determination of Succinimide Degradation Products Using High Fidelity Trypsin Digestion Peptide Map Analysis

We report an efficient, high fidelity trypsin digestion method for peptide map analysis. This method minimizes artifacts caused by the sample preparation process, and we show its utility for the accurate determination of succinimide formation in a degraded monoclonal antibody product. A basic charge variant was detected by imaged capillary isoelectric focusing and was shown with reduced antigen binding and biological activity. Samples were reduced under denaturing conditions at pH 5.0, and digestion of the reduced protein with porcine trypsin was performed at pH 7.0 for 1 h. Following reversed phase high-performance liquid chromatography and online mass spectrometric analysis, succinimide formation was identified at Asp30 in the light chain. This result contrasts with the observation of only iso-Asp and Asp residues under conventional sample preparation conditions, which are therefore concluded to be artificially generated. The Asp30 residue is seen in the cocrystal structure model to participate in favorable charge interaction with an antigen molecule. Formation of succinimide and the resulting loss of negative charge are therefore hypothesized to be the degradation mechanism. After treatment of the degraded antibody sample to mildly alkaline pH conditions, we observed only Asp residue as the succinimide hydrolysis product and concurrent recovery of biological activity.

On-line mass spectrometric analysis of hydrothermal reactions for biomass model sample containing sulfur compounds

Biomass gasification using supercritical water is a promising way to produce hydrogen gas. However, this method might release toxic heteroatomic compounds. It is therefore important to clarify reaction pathways for efficiently obtaining hydrogen gas and suppressing environmental burden. L-cysteine was adopted for a test reagent containing sulfur and determination of the sulfur compound reaction pathways was studied by Li+-ion attachment mass spectrometry. It was found that H2S, CO, CO2, SO, SO2 and SO3 gasses were released at high concentrations in the gas phase during the hydrothermal reaction. By adding Ca(OH)2 as alkali, the pathway of these gasses were, however, suppressed into the liquid phase so that the toxic emissions to the gas phase could be avoided.

Online Mass Spectrometric Analysis of Proteins/Peptides Following Electrolytic Cleavage of Disulfide Bonds

The disulfide bond bridge is an important post-translational modification for proteins. This study presents a structural analysis of biologically active peptides and proteins containing disulfide bonds using electrochemistry (EC) online combined with desorption electrospray ionization mass spectrometry (DESI-MS), in which the sample undergoes electrolytic disulfide cleavage in an electrochemical flow cell followed by MS detection. Using this EC/DESI-MS method, the disulfide-containing peptides can be quickly identified from enzymatic digestion mixtures, simply based on the abrupt decrease in their relative ion abundances after electrolysis. Peptide mass mapping and tandem MS analysis of the ions of the resulting free peptide chains can possibly establish the disulfide linkage pattern and sequence the precursor peptides. In this regard, the method provides much more chemical information than previous analogous electrochemical analyses. In addition, derivatization of thiols by selective selenamide reagents is useful for easy recognition of reduced peptide ions and the number of their free thiols. Furthermore, electrolytic reduction of proteins (e.g., α-lactalbumin) leads to increased charges on the detected protein ions, revealing the role of disulfide bonds on maintaining protein conformation. This electrochemical mass spectrometric method is fast (completed in few minutes) and does not need chemical reductants, potentially having valuable applications in proteomics research.

Identification and Characterization of a Novel-type Ferric Siderophore Reductase from a Gram-positive Extremophile

Iron limitation is one major constraint of microbial life, and a plethora of microbes use siderophores for high affinity iron acquisition. Because specific enzymes for reductive iron release in gram-positives are not known, we searched Firmicute genomes and found a novel association pattern of putative ferric siderophore reductases and uptake genes. The reductase from the schizokinen-producing alkaliphile Bacillus halodurans was found to cluster with a ferric citrate-hydroxamate uptake system and to catalyze iron release efficiently from Fe[III]-dicitrate, Fe[III]-schizokinen, Fe[III]-aerobactin, and ferrichrome. The gene was hence named fchR for ferric citrate and hydroxamate reductase. The tightly bound [2Fe-2S] cofactor of FchR was identified by UV-visible, EPR, CD spectroscopy, and mass spectrometry. Iron release kinetics were determined with several substrates by using ferredoxin as electron donor. Catalytic efficiencies were strongly enhanced in the presence of an iron-sulfur scaffold protein scavenging the released ferrous iron. Competitive inhibition of FchR was observed with Ga(III)-charged siderophores with K(i) values in the micromolar range. The principal catalytic mechanism was found to couple increasing K(m) and K(D) values of substrate binding with increasing k(cat) values, resulting in high catalytic efficiencies over a wide redox range. Physiologically, a chromosomal fchR deletion led to strongly impaired growth during iron limitation even in the presence of ferric siderophores. Inductively coupled plasma-MS analysis of ΔfchR revealed intracellular iron accumulation, indicating that the ferric substrates were not efficiently metabolized. We further show that FchR can be efficiently inhibited by redox-inert siderophore mimics in vivo, suggesting that substrate-specific ferric siderophore reductases may present future targets for microbial pathogen control.

Oxygen Isotope (18O2) Evidence on the Role of Oxygen in the Plasma-Driven Catalysis of VOC Oxidation

This paper reports isotopic evidence on nonthermal plasma-induced fixation of gas-phase oxygen on the surface of several catalysts such as TiO2, Ag/TiO2, Ag/γ-Al2O3 and Ag/MS-13X at atmospheric-pressure. On-line mass spectrometric analysis and stoichiometric comparison of reactants and products revealed that the fixed surface oxygen can be activated by nonthermal plasma. The fixed 18O by nonthermal plasma survived for a certain period of time (about 30 min), and involved in the formation of isotope-exchanged oxygen (18O16O) and isotope containing CO x (CO and CO2).

Plasma Induced Oxidative Cleavage of Disulfide Bonds in Polypeptides during Nanoelectrospray Ionization

Cleavage of the disulfide bond within a polypeptide was observed when the nanoelectrospray (nanoESI) plume of a peptide solution interacted with a low-temperature helium plasma in air. Online mass spectrometric analysis revealed that chain separation accompanied by a mass increase of 1 or 16 Da for each chain was common to peptides having an interchain disulfide bond, while for peptides having intrachain disulfide bonds, the reaction products typically showed mass increases of 17 Da. Experimental results suggested that hydroxyl radicals initiated from the plasma were likely to be responsible via dissociative addition to the disulfide bond (RSSR'), giving rise to RSH and R'SO*. When the hydroxyl radical addition product ions ([M + nH + OH](n*+), n is the charge state) generated from peptides having intrachain peptides were subjected to collision-induced dissociation (CID) in an ion trap, a-, b-, and y-type sequence ions within the cyclic structure defined by the disulfide bond were observed in addition to the exocyclic cleavages typically seen from CID of [M + nH](n+) peptide ions. Rich structural information could thus be obtained. These findings were demonstrated in 14 peptides containing disulfide bonds and further by bovine insulin, which has three disulfide bonds. Collisional activation of the [M + 5H + OH](5*+) insulin ions provided 76% of the possible backbone cleavages as compared to 26% acquired from CID of the [M + 5H](5+) ions.