Numerical Simulations Research Articles

Deterministic positioning and alignment of a single-molecule exciton in plasmonic nanodimer for strong coupling.

Experimental realization of strong coupling between a single exciton and plasmons remains challenging as it requires deterministic positioning of the single exciton and alignment of its dipole moment with the plasmonic fields. This study aims to combine the host-guest chemistry approach with the cucurbit[7]uril-mediated active self-assembly to precisely integrate a single methylene blue molecule in an Au nanodimer at the deterministic position (gap center of the nanodimer) with the maximum electric field (EFmax) and perfectly align its transition dipole moment with the EFmax, yielding a large spectral Rabi splitting of 116 meV for a single-molecule exciton-matching the analytical model and numerical simulations. Statistical analysis of vibrational spectroscopy and dark-field scattering spectra confirm the realization of the single exciton strong coupling at room temperature. Our work may suggest an approach for achieving the strong coupling between a deterministic single exciton and plasmons, contributing to the development of room-temperature single-qubit quantum devices.

Numerical simulation on the heat sink with interrupted microchannels regarding of heat transfer enhancement

Numerical simulation on the heat sink with interrupted microchannels regarding of heat transfer enhancement

Regulatory disturbances in the dynamical signaling systems of and NO in fibroblasts cause fibrotic disorders.

Studying the calcium dynamics within a fibroblast cell individually has provided only a restricted understanding of its functions. However, research efforts focusing on systems biology approaches for such investigations have been largely neglected by researchers until now. Fibroblast cells rely on signaling from calcium and nitric oxide (NO) to maintain their physiological functions and structural stability. Various studies have demonstrated the correlation between NO and the control of dynamics in cells. However, there is currently no existing model to assess the disruptions caused by various factors in regulatory dynamics, potentially resulting in diverse fibrotic disorders. A mathematical model has been developed to investigate the effects of changes in parameters such as buffer, receptor, sarcoplasmic endoplasmic reticulum -ATPase (SERCA) pump, and source influx on the regulation and dysregulation of spatiotemporal calcium and NO dynamics in fibroblast cells. This model is based on a system of reaction-diffusion equations, and numerical simulations are conducted using the finite element method. Disturbances in key processes related to calcium and nitric oxide, including source influx, buffer mechanism, SERCA pump, and inositol trisphosphate receptor, may contribute to deregulation in the calcium and NO dynamics within fibroblasts. The findings also provide new insights into the extent and severity of disorders resulting from alterations in various parameters, potentially leading to deregulation and the development of fibrotic disease.

A hemodynamic model of artery bypass graft considering microcirculation function.

The incidence of arterial stenosis is increasing year by year. In order to better diagnose and treat arterial stenosis, numerical simulation technology has become a popular method. A novel model is constructed to investigate the influence of microcirculation on the hemodynamics of artery bypass graft. In this paper, a severely narrow artery bypass graft model is considered. The geometric shape includes a narrow artery tube and a bypass graft of the same diameter with a 45° suture angle. The fluid-structure interaction model is considered by finite element numerical calculation, and the flow is simulated with microcirculation as the outlet boundary condition. The changes of blood flow velocity, pressure and wall shear stress are analyzed. The results show that blood almost entirely flows into the graft tube and there is no recirculation area at the anastomosis. The artery bypass graft model considering microcirculation function could simulate the physiological characteristics of blood flow more reasonably, and it provide helps for clinicians to diagnose and treat arterial stenosis.

Numerical Simulation Study on the Impact of Excavation on Existing Subway Stations Based on BIM-FEM Framework

Numerical Simulation Study on the Impact of Excavation on Existing Subway Stations Based on BIM-FEM Framework

Numerical Simulation of Mold Filling of Polymeric Materials with Friction Effect during Hot Embossing Process at Micro Scale

Numerical Simulation of Mold Filling of Polymeric Materials with Friction Effect during Hot Embossing Process at Micro Scale

Solid Lubricant in the Insect Leg Joints: Numerical Simulation of Tribological Properties

Solid Lubricant in the Insect Leg Joints: Numerical Simulation of Tribological Properties

Approach for determining micro-strength parameters of rock based on particle flow code.

Discrete Element Method (DEM) has been successfully utilized to model rock behavior based on particle flow code (PFC), which is extensively employed in solving various problems related to rock engineering and geomechanics. Therefore, a convenient method for selecting appropriate microparameters of PFC for model generation is necessary. The present study aims to develop a novel approach that calculates proper micro-strength parameters for the contact bond model (CBM). Firstly, based on Plackett-Burman (PB) design, qualitative research is conducted and it is found that the main factors that influence the Brazilian tensile strength is microscopic tensile strength. We analyzed the stress conditions of a Brazilian disc's vertical diameter using both continuum models and DEM. From this analysis, we establish a theoretical relationship between rock tensile strength and micro-strength parameters. Subsequently, a large number of numerical Brazilian tests were conducted to obtain the statistical relationship between the geometric parameters of balls, micro-strength parameters and the Brazilian tension strength. The results of the numerical simulation were then used to refine the theoretical equation mentioned above, resulting in a modified equation for rock tensile strength and micro-strength parameters. Finally, after verification, we confirm the feasibility of the method in this paper.

On the Features of Numerical Simulation of Hydrogen Self-Ignition under High-Pressure Release

On the Features of Numerical Simulation of Hydrogen Self-Ignition under High-Pressure Release

Towards the understanding of convective dissolution in confined porous media: thin bead pack experiments, two-dimensional direct numerical simulations and physical models

Towards the understanding of convective dissolution in confined porous media: thin bead pack experiments, two-dimensional direct numerical simulations and physical models

Crescent-shaped spatial distribution: radiation properties concerning beam waist from the cross collision of a tightly focused laser pulse and a relativistic electron

The radiation properties of the cross collision between a single electron and an intense laser pulse are researched by numerical simulation methods. Under the condition of tightly-focused laser, the electron trajectories, spatiotemporal distribution and spectrum are compared with that under non-tightly focused lasers. The results show that the torsion effect on the electron during the oscillation process is more notable after the tightly focused laser interacts with electron. The radiation it generates is asymmetric in space, and its time distribution is nearly unimodal and can be regarded as a single attosecond pulse. In frequency domain, the spectrum appears to be a supercontinuum. With the increase of beam waist radius, the symmetry of the spatial distribution enhances and time distribution also exhibits a three-peak structure that is symmetrical about the main peak. Furthermore, the spectrum changes from a supercontinuum to a multimodal distribution. The analysis turns out that tightly focused laser is more realistic compared to non-tightly focused laser or even plane wave, which benefits the design of high-quality x-rays in practical application.

Structural Improvement and Numerical Simulation of a Perforated Distributor in an Adsorption Tower

Structural Improvement and Numerical Simulation of a Perforated Distributor in an Adsorption Tower

Fatigue Life Prediction and Verification of Railway Fastener Clip Based on Critical Plane Method

Accurately predicting the fatigue life of fastener clips is crucial for improving material processing technology, enhancing the anti-fatigue design level, and guiding the maintenance and repair of track structures. Conventional methods that solely evaluate the fatigue life of fastener clips based on the uniaxial stress index under displacement loads may lead to significant errors. In this paper, the stress field of a type-III clip under displacement loading conditions was numerically simulated based on fatigue test standards, and the fatigue life of the clip was analyzed using the Fatemi–Socie (FS) multiaxial fatigue criterion based on the critical plane method. A comparison with standard fatigue test results revealed that, under non-resonance conditions, the predicted position of the fatigue critical plane of the fastener clip coincided with the fracture surface observed at the middle of the measured small arc, with a life prediction error of 7.3%. To further investigate the predictive capability of the FS multiaxial fatigue criterion for the fatigue life of the fastener clip under resonance conditions, the stress levels of the clip under non-resonance and resonance conditions were compared through on-site testing, and the effects of inertial loads caused by vertical and lateral vibration acceleration on the stress field of the clip were analyzed in numerical simulation according to the results of clip acceleration tests; the fastener clip’s resonance fracture position and fatigue life were also predicted based on the aforementioned multiaxial fatigue criterion. To verify the accuracy of the predicted results, a testing method was proposed that equates the high-frequency resonant inertial load of the fastener clip to a low-frequency additional preload under the premise of consistent stress fields. A comparison with the numerical simulation results shows that considering only vertical inertial loads would result in a discrepancy between the measured fracture location and the actual one. Considering both vertical and lateral inertial loads, the fracture location (at the heel of the small arc) under resonance conditions could be accurately determined, with a life prediction error of 13.8%. Compared to the non-resonant displacement loading condition, the inertial loads caused by acceleration under resonance conditions led to a reduction in fatigue life of approximately 77.8%.

Orbital Stability Study of the Taiji Space Gravitational Wave Detector

Space-based gravitational wave detection is extremely sensitive to disturbances. The Keplerian configuration cannot accurately reflect the variations in spacecraft configuration. Planetary gravitational disturbances are one of the main sources. Numerical simulation is an effective method to investigate the impact of perturbation on spacecraft orbits. This study shows that, in the context of the Taiji project, Earth’s gravity is an essential factor in the change in heliocentric formation configuration, contributing to the relative acceleration between spacecrafts in the order of O(10−6)m·s−2. Considering 00:00:00 on 27 October 2032 as the initial orbiting moment, under the influence of Earth’s gravitational perturbation, the maximum relative change in armlengths and variation rates of armlengths for Taiji is 1.6×105km, 32m·s−1, respectively, compared with the unperturbed Keplerian orbit. Additionally, by considering the gravitational perturbations of Venus and Jupiter, the armlength and relative velocity for Taiji are reduced by 16.01% and 17.45%, respectively, compared with when only considering that of Earth. The maximum amplitude of the formation motion indicator changes with the orbit entry time. Results show that the relative velocity increase between the spacecrafts is minimal when the initial orbital moment occurs in July. Moreover, the numerical simulation results are inconsistent when using different ephemerides. The differences between ephemerides DE440 and DE430 are smaller than those between DE440 and DE421.

Bearing Performance of Prestressed High-Strength Concrete Pipe Pile Cap Connections under Truncated Pile Conditions

To investigate the load-carrying performance of the nodes between tubular piles and bearing platforms, low circumferential reciprocating load foot-scale tests were performed on two truncated PHC B 600 130 tubular piles. The development law of node destruction was explored. The test results revealed that under the action of tensile–bending–shear loading, the bearing concrete in the node area buckled and was damaged, and an articulation point was formed. When the embedment depth increased from 200 mm to 300 mm, the ultimate bearing capacities of the positive and negative nodes increased by 57.60% and 54.60%, respectively. Numerical simulation was used to analyze the bearing capacities of nodes with different types and embedment depths. Formulas for the bearing capacity of the nodes were proposed. Furthermore, two preferred node types were proposed as follows: pipe pile core-filled longitudinal reinforcement anchored to the bearing node and pipe pile body longitudinal reinforcement anchored to the bearing node + pipe pile core-filled longitudinal reinforcement anchored to the bearing node, with preferred embedment depths of 350 mm and 200 mm, respectively.

Structure and maintenance of a quasi-linear mesoscale convective system that caused torrential rain in southern Kyushu, Japan on 11 July 2021

Abstract A quasi-linear mesoscale convective system that remained nearly stationary (hereafter referred to as a stationary QLCS) for almost 8 h in southern Kyushu, Japan, caused torrential rainfall exceeding 350 mm on 11 July 2021. The stationary QLCS consisted of several rainbands organized by back-building convection. As the cold pool intensified, the system attained a more widespread structure, leaning on the upshear side. To elucidate the mechanism responsible for the upshear tilt, numerical simulations with 250-m horizontal grid spacing were conducted, including sensitivity experiments in which the evaporative cooling rates from rain were reduced to modify the cold pool intensity. Results show that the cold pool is critical to the organization of the QLCS, and the structure normal to it is mainly governed by the balance between the low-level shear magnitude and cold pool intensity, supporting the application of so-called Rotunno-Klemp-Weisman (RKW) theory to this event. The cause of the weak updraft that accompanies the leaning system over the strong cold pool was also investigated, analyzing the trajectories, vertical momentum equation, and pressure perturbation field using the anelastic equation. It is revealed that the updraft travels a longer distance through the tilted system experiencing more mixing with the ambient air, which results in less thermal buoyancy. In addition, the updraft is decelerated by the downward perturbation gradient force owing to the vertical buoyancy gradient around the sloping surface of the cold pool and the dynamical effect caused by the baroclinity-associated strong horizontal vorticity around the cold pool leading edge.

The soliton and periodic solutions for the perturbed sine–cosine–Gordon equation

In the paper, the existence of soliton and periodic solutions is studied for the perturbed sine–cosine–Gordon equation. The corresponding traveling wave system is converted to a regularly Hamilton system via using bifurcation theory of differential equations and the geometric singular perturbation theory. Then by using Melnikov's method and symbolic computation, periodic wave solutions, solitary solutions, and kink and antikink solutions are obtained. The wave speed selection principles are given, respectively. Numerical simulations are performed to illustrate our theoretical analysis.

An evolutionary game analysis of algorithmic indirect copyright infringement from the perspective of collusion between UGC platforms and direct infringers.

User-generated content (UGC) is developing rapidly as an emerging platform form, however, the problem of indirect copyright infringement by algorithms is becoming more and more prominent, and infringement governance has become a key act in the development of UGC platforms. When infringement occurs, recommendation algorithms expand the scope and results of infringement, while platforms choose to conspire with direct infringers for their own interests, making it difficult for infringed persons to defend their rights. In order to analyse the influence of different factors in the platform ecosystem on the subject's behavioural strategies, a "platform-infringer" evolutionary game model is constructed, and numerical simulation is used to verify the correctness of the stable results. Based on the simulation results, it is concluded that the factors of uncertain revenue, punishment and reputation loss have important influence on the decision-making behaviour of the subject of infringement governance, and accordingly, the proposed measures on the publishers, platforms and the legal level of the government are conducive to the evolution of the system to the point of positive regulation and stability of rights protection, with a view to promoting the healthier and more stable development of the UGC platforms.

Numerical Simulation of Lost-Foam Casting for Key Components of A356 Aluminum Alloy in New Energy Vehicles

The intricate geometry and thin walls of the motor housing in new energy vehicles render it susceptible to casting defects during conventional casting processes. However, the lost-foam casting process holds a unique advantage in eliminating casting defects and ensuring the strength and air-tightness of thin-walled castings. In this paper, the lost-foam casting process of thin-walled A356 alloy motor housing was simulated using ProCAST software (2016.0). The results indicate that the filling process is stable and exhibits characteristics of diffusive filling. Solidification occurs gradually from thin to thick. Defect positions are accurately predicted. Through analysis of the defect volume range, the optimal process parameter combination is determined to be a pouring temperature of 700 °C, an interfacial heat transfer coefficient of 50, and a sand thermal conductivity coefficient of 0.5. Microscopic analysis of the motor housing fabricated using the process optimized through numerical simulations reveals the absence of defects such as shrinkage at critical locations.

Simulation of a Pulsed Metastable Helium Lidar

Measurements of atmosphere density in the upper thermosphere and exosphere are of great significance for studying space–atmosphere interactions. However, the region from 200 km to 1000 km has been a blind area for traditional ground-based active remote sensing techniques due to the limitation of facilities and the paucity of neutral atmosphere. To fulfill this gap, the University of Science and Technology of China is developing a powerful metastable helium resonance fluorescent lidar incorporating a 2 m aperture telescope, a high-energy 1083 nm pulsed laser, as well as a superconducting nanowire single-photon detector (SNSPD) with high quantum efficiency and low dark noise. The system is described in detail in this work. To evaluate the performance of the lidar system, numerical simulation is implemented. The results show that metastable helium density measurements can be achieved with a relative error of less than 20% above 370 km in winter and less than 200% in 270–460 km in summer, demonstrating the feasibility of metastable helium lidar.