Nuclear Magnetic Resonance Sample Research Articles

Diffusion in Nanoporous Materials: Novel Insights by Combining MAS and PFG NMR

Pulsed field gradient (PFG) nuclear magnetic resonance (NMR) allows recording of molecular diffusion paths (notably, the probability distribution of molecular displacements over typically micrometers, covered during an observation time of typically milliseconds) and has thus proven to serve as a most versatile means for the in-depth study of mass transfer in complex materials. This is particularly true with nanoporous host materials, where PFG NMR enabled the first direct measurement of intracrystalline diffusivities of guest molecules. Spatial resolution, i.e., the minimum diffusion path length experimentally observable, is limited by the time interval over which the pulsed field gradients may be applied. In “conventional” PFG NMR measurements, this time interval is determined by a characteristic quantity of the host-guest system under study, the so-called transverse nuclear magnetic relaxation time. This leads, notably when considering systems with low molecular mobilities, to severe restrictions in the applicability of PFG NMR. These restrictions may partially be released by performing PFG NMR measurements in combination with “magic-angle spinning” (MAS) of the NMR sample tube. The present review introduces the fundamentals of this technique and illustrates, via a number of recent cases, the gain in information thus attainable. Examples include diffusion measurements with nanoporous host-guest systems of low intrinsic mobility and selective diffusion measurement in multicomponent systems.

Current NMR Techniques for Structure-Based Drug Discovery.

A variety of nuclear magnetic resonance (NMR) applications have been developed for structure-based drug discovery (SBDD). NMR provides many advantages over other methods, such as the ability to directly observe chemical compounds and target biomolecules, and to be used for ligand-based and protein-based approaches. NMR can also provide important information about the interactions in a protein-ligand complex, such as structure, dynamics, and affinity, even when the interaction is too weak to be detected by ELISA or fluorescence resonance energy transfer (FRET)-based high-throughput screening (HTS) or to be crystalized. In this study, we reviewed current NMR techniques. We focused on recent progress in NMR measurement and sample preparation techniques that have expanded the potential of NMR-based SBDD, such as fluorine NMR (19F-NMR) screening, structure modeling of weak complexes, and site-specific isotope labeling of challenging targets.

Augmenting microwave irradiation in MAS DNP NMR samples at 263 GHz

The magnetic microwave field strength and its detailed spatial distribution in magic-angle spinning (MAS) nuclear magnetic resonance (NMR) probes capable of dynamic nuclear polarization (DNP) is investigated by numerical simulations with the objective to augment the magnetic microwave amplitude by structuring the sample in the mm and sub-mm range and by improving the coupling of the incident microwave beam to the sample. As it will be shown experimentally, both measures lead to an increase of the microwave efficiency in DNP MAS NMR.

Analysis of Prion Protein Structure Using Nuclear Magnetic Resonance Spectroscopy.

Nuclear magnetic resonance (NMR) spectroscopy is a powerful experimental tool for obtaining information on three-dimensional (3D) structures of proteins at atomic resolution. In inherited forms of prion diseases, misfolding of cellular prion protein, PrPC, into its pathological form, PrPSc, is caused by mutations in the human prion protein gene (PRNP). Understanding of the earliest stages of the conformational changes leading to spontaneous generation of prions in inherited forms of prion diseases may benefit from detailed structural analysis of different human (Hu) PrP variants. Here, we describe the protocol for structure determination of HuPrP variants by NMR spectroscopy in solution that consists of preparation of NMR samples, acquisition of NMR data, NMR resonance assignments, and structure calculation.

Improved in-cell structure determination of proteins at near-physiological concentration.

Investigating three-dimensional (3D) structures of proteins in living cells by in-cell nuclear magnetic resonance (NMR) spectroscopy opens an avenue towards understanding the structural basis of their functions and physical properties under physiological conditions inside cells. In-cell NMR provides data at atomic resolution non-invasively, and has been used to detect protein-protein interactions, thermodynamics of protein stability, the behavior of intrinsically disordered proteins, etc. in cells. However, so far only a single de novo 3D protein structure could be determined based on data derived only from in-cell NMR. Here we introduce methods that enable in-cell NMR protein structure determination for a larger number of proteins at concentrations that approach physiological ones. The new methods comprise (1) advances in the processing of non-uniformly sampled NMR data, which reduces the measurement time for the intrinsically short-lived in-cell NMR samples, (2) automatic chemical shift assignment for obtaining an optimal resonance assignment, and (3) structure refinement with Bayesian inference, which makes it possible to calculate accurate 3D protein structures from sparse data sets of conformational restraints. As an example application we determined the structure of the B1 domain of protein G at about 250 μM concentration in living E. coli cells.

Model-free estimation of the effective correlation time for C-H bond reorientation in amphiphilic bilayers: (1)H-(13)C solid-state NMR and MD simulations.

Molecular dynamics (MD) simulations give atomically detailed information on structure and dynamics in amphiphilic bilayer systems on timescales up to about 1 μs. The reorientational dynamics of the C-H bonds is conventionally verified by measurements of (13)C or (2)H nuclear magnetic resonance (NMR) longitudinal relaxation rates R1, which are more sensitive to motional processes with correlation times close to the inverse Larmor frequency, typically around 1-10 ns on standard NMR instrumentation, and are thus less sensitive to the 10-1000 ns timescale motion that can be observed in the MD simulations. We propose an experimental procedure for atomically resolved model-free estimation of the C-H bond effective reorientational correlation time τe, which includes contributions from the entire range of all-atom MD timescales and that can be calculated directly from the MD trajectories. The approach is based on measurements of (13)C R1 and R1ρ relaxation rates, as well as (1)H-(13)C dipolar couplings, and is applicable to anisotropic liquid crystalline lipid or surfactant systems using a conventional solid-state NMR spectrometer and samples with natural isotopic composition. The procedure is demonstrated on a fully hydrated lamellar phase of 1-palmitoyl-2-oleoyl-phosphatidylcholine, yielding values of τe from 0.1 ns for the methyl groups in the choline moiety and at the end of the acyl chains to 3 ns for the g1 methylene group of the glycerol backbone. MD simulations performed with a widely used united-atom force-field reproduce the τe-profile of the major part of the acyl chains but underestimate the dynamics of the glycerol backbone and adjacent molecular segments. The measurement of experimental τe-profiles can be used to study subtle effects on C-H bond reorientational motions in anisotropic liquid crystals, as well as to validate the C-H bond reorientation dynamics predicted in MD simulations of amphiphilic bilayers such as lipid membranes.

In-cell ¹³C NMR spectroscopy for the study of intrinsically disordered proteins.

A large number of proteins carry out their function in highly flexible and disordered states, lacking a well-defined 3D structure. These proteins, referred to as intrinsically disordered proteins (IDPs), are now in the spotlight of modern structural biology. Nuclear magnetic resonance (NMR) spectroscopy represents a unique tool for accessing atomic resolution information on IDPs in complex environments as whole cells, provided that the methods are optimized to their peculiar properties and to the characteristics of in-cell experiments. We describe procedures for the preparation of in-cell NMR samples, as well as for the setup of NMR experiments and their application to in-cell studies, using human α-synuclein overexpressed in Escherichia coli as an example. The expressed protein is labeled with (13)C and (15)N stable isotopes to enable the direct recording of (13)C-detected NMR experiments optimized for the properties of IDPs. The entire procedure covers 24 h, including cell transformation, cell growth overnight, setup of the spectrometer and NMR experiment recording.

High-Field Nuclear Magnetic Resonance Observation of Gas Shale Fracturing by Methane Gas

We monitor the fracturing of gas shale using high-pressure methane gas, by studying the changes in gas transport using high-field nuclear magnetic resonance (NMR). This helps us understand the fundamental relation between the newly created pathways and the enhanced gas transport. The ability to make such correlations is challenging, partially because of the difficulty in monitoring the gas transport during the transient fracturing process. Here, we demonstrate a methodology for fracturing gas shale core samples inside a high-pressure, high-field NMR sample tube and studying its effect on gas transport kinetics by tracking the time-dependent NMR signal intensity. The ultralow permeability of shale makes the transient gas transport slow enough to be monitored by a series of NMR signals. The time constant that characterizes the transient process toward equilibrium is directly related to the permeability of core samples. The signatures of permanent fractures in the shale core plugs created by a sudden pressure release are identified by the shorter equilibrium time constant. Although these permanent fractures are not visible to the naked eye, they are ex-situ-verified by microcomputed tomography (microCT). These results demonstrate a NMR methodology to characterize the gas transport and fracturing property of gas shale, promising a better understanding of their relationships.

Remote sensing of sample temperatures in nuclear magnetic resonance using photoluminescence of semiconductor quantum dots

Knowledge of sample temperatures during nuclear magnetic resonance (NMR) measurements is important for acquisition of optimal NMR data and proper interpretation of the data. Sample temperatures can be difficult to measure accurately for a variety of reasons, especially because it is generally not possible to make direct contact to the NMR sample during the measurements. Here I show that sample temperatures during magic-angle spinning (MAS) NMR measurements can be determined from temperature-dependent photoluminescence signals of semiconductor quantum dots that are deposited in a thin film on the outer surface of the MAS rotor, using a simple optical fiber-based setup to excite and collect photoluminescence. The accuracy and precision of such temperature measurements can be better than ±5K over a temperature range that extends from approximately 50K (−223°C) to well above 310K (37°C). Importantly, quantum dot photoluminescence can be monitored continuously while NMR measurements are in progress. While this technique is likely to be particularly valuable in low-temperature MAS NMR experiments, including experiments involving dynamic nuclear polarization, it may also be useful in high-temperature MAS NMR and other forms of magnetic resonance.

Numerical Analysis of Hydroinertia Gas Bearings with Inclined Supply Holes for High-Speed Rotary Machines

Hydroinertia gas journal bearings have been applied to solid-state nuclear magnetic resonance (NMR) as an example. This type of bearing can realize a stable operation for the ultra-high-speed rotation of an NMR sample tube as high as several million rpm, because these bearings utilize a large radial clearance compared with conventional externally pressurized bearings. To obtain even higher rotational speeds, inclined supply holes in the direction of shaft rotation have been proposed. The characteristics of these proposed bearings are examined in this study by numerical analysis because the actual NMR sample rotor is thin and long (with a diameter of 1 mm to 4 mm). The numerical analysis results of the hydroinertia journal bearings are reported in this study. Variation of the pressure distribution and the load capacity with respect to the effect of the radial clearance and the angle of the supply holes are described. The results show that a negative pressure is generated at large radial clearance, and the load capacity does not affect the angle. The pressure distribution was experimentally verified using a test rig, which has 10 mm diameter rotor.

Temperature Distribution in a Solid State NMR Sample Rotor during MAS Experiments

We investigated temperature distribution in a solid state nuclear magnetic resonance (NMR) sample rotor under magic angle spinning (MAS) experiments by analyzing the (207)Pb chemical shift of solid lead nitrate (Pb(NO3)2). The analysis corrected a mismatch of the temperature dependence of (1)H spin-lattice relaxation time (T1(H)) obtained from different sample positions in the rotor. We prepared three rotors that consisted of Pb(NO3)2 partitioned into the three different parts with Teflon spacers, and measured the temperature distribution related to the placement using the prepared three rotors. The obtained temperature distribution showed a large gradient in the sample rotor. The temperature distribution was related to the placement in the rotor and successfully visualized. Finally, the divergent temperature dependence of T1(H) obtained at different placement positions in the sample rotor was successfully corrected to accurate temperature dependence.

Batch profiling calibration for robust NMR metabonomic data analysis

Metabonomic studies involve the analysis of large numbers of samples to identify significant changes in the metabolic fingerprints of biological systems, possibly with sufficient statistical power for analysis. While procedures related to sample preparation and spectral data acquisition generally include the use of independent sample batches, these might be sources of systematic variation whose effects should be removed to focus on phenotyping the relevant biological variability. In this work, we describe a grouped-batch profile (GBP) calibration strategy to adjust nuclear magnetic resonance (NMR) metabolomic data-sets for batch effects either introduced during NMR experiments or samples work-up. We show how this method can be applied to data calibration in the context of a large-scale NMR epidemiological study where quality control samples are available. We also illustrate the efficiency of a batch profile correction for NMR metabonomic investigation of cell extracts, where GBP can significantly improve the predictive power of multivariate statistical models for discriminant analysis of the cell infection status. The method is applicable to a broad range of NMR metabolomic/metabonomic cohort studies.

Nuclear Magnetic Resonance Spectroscopy of the Circadian Clock of Cyanobacteria

The most well-understood circadian clock at the level of molecular mechanisms is that of cyanobacteria. This overview is on how solution-state nuclear magnetic resonance (NMR) spectroscopy has contributed to this understanding. By exciting atomic spin-½ nuclei in a strong magnetic field, NMR obtains information on their chemical environments, inter-nuclear distances, orientations, and motions. NMR protein samples are typically aqueous, often at near-physiological pH, ionic strength, and temperature. The level of information obtainable by NMR depends on the quality of the NMR sample, by which we mean the solubility and stability of proteins. Here, we use examples from our laboratory to illustrate the advantages and limitations of the technique.

Quantitative preparative gas chromatography of caffeine with nuclear magnetic resonance spectroscopy

Caffeine test solute was employed in combination with an internal standard (IS), 1,4-dimethoxybenzene, in preparative-gas chromatography (prep-GC), with nuclear magnetic resonance (NMR) experiments. The IS served to: (i) quantify the trapping efficiency of an external trapping assembly, consisting of a capillary column cryotrap at the end of the analytical column; (ii) quantify the solute response in different NMR samples; and (iii) permit correlation of expected level of response of a compound in the NMR experiment, based on relative responses of the IS and solute in the GC result. The recovery rate of caffeine from multiple injections of sample (1×, 2×, 5× and 10×) was 69.6 ± 1.3%, which correlated well (R(2) = 0.999) with the number of injections of compound. The (1)H-NMR spectrum was sufficient to enable structural characterisation of the reference caffeine compound, and was achieved with recovery of amounts of ≤10 μg from a single aliquot. Less than 400 μg of collected caffeine (40 replicate injections) was sufficient for structural characterisation by (13)C-NMR spectral analysis. The method allows development of approaches to separate unknown compounds in complex samples, and to separately use MS and NMR for their characterisation.

Functional Identification of Toxin-Antitoxin Molecules from Helicobacter pylori 26695 and Structural Elucidation of the Molecular Interactions

Bacterial toxin-antitoxin (TA) systems are associated with many important cellular processes including antibiotic resistance and microorganism virulence. Here, we identify and structurally characterize TA molecules from the gastric pathogen, Helicobacter pylori. The HP0894 protein had been previously suggested, through our structural genomics approach, to be a putative toxin molecule. In this study, the intrinsic RNase activity and the bacterial cell growth-arresting activity of HP0894 were established. The RNA-binding surface was identified at three residue clusters: (Lys(8) and Ser(9)), (Lys(50)-Lys(54) and Glu(58)), and (Arg(80) and His(84)-Phe(88)). In particular, the -UA- and -CA- sequences in RNA were preferentially cleaved by HP0894, and residues Lys(52), Trp(53), and Ser(85)-Lys(87) were observed to be the main contributors to sequence recognition. The action of HP0894 could be inhibited by the HP0895 protein, and the HP0894-HP0895 complex formed an oligomer with a binding stoichiometry of 1:1. The N and C termini of HP0894 constituted the binding sites to HP0895. In contrast, the unstructured C-terminal region of HP0895 was responsible for binding to HP0894 and underwent a conformational change in the process. Finally, DNA binding activity was observed for both HP0895 and the HP0894-0895 complex but not for HP0894 alone. Taken together, it is concluded that the HP0894-HP0895 protein couple is a TA system in H. pylori, where HP0894 is a toxin with an RNase function, whereas HP0895 is an antitoxin functioning by binding to both the toxin and DNA.

Determination of chemical shift of gas-phase hydrogen molecules by 1H nuclear magnetic resonance

The precise and detailed chemical shift of gas-phase hydrogen molecules was successfully determined by 1H nuclear magnetic resonance (NMR), avoiding the intervention of neighboring molecules such as in hydrogen occluding materials (free hydrogen). The measurement was conducted with double walled NMR sample tube taking into consideration the change of hydrogen pressure. The inner tube was filled with standard substance (DHO in D 2O at 4.8 ppm). The chemical shift of free hydrogen molecules was determined to be 7.40 ± 0.01 ppm at 0.18 MPa, 25 °C, which is different from previously reported chemical shifts of hydrogen gas with intervention of neighboring molecules.

Small Magnets for Portable NMR Spectrometers

High-resolution nuclear magnetic resonance (NMR) spectroscopy is one of the most powerful analytical tools used to probe details of molecular structure and dynamics. The study of large molecules such as proteins requires high sensitivity and high spectral resolution, which are both achieved with strong magnetic fields. These fields are generated by huge superconducting magnets, which are made stronger and bigger each year to tackle larger and larger molecules. The results of this amazing technological effort are bulky and static magnets permanently installed in dedicated NMR laboratories. The size of the superconducting magnets, their sensitivity to harsh environments, and the cost of maintenance and operation keep this technology away from fume hoods and production sites, where simpler devices that provide access to medium-size molecules would be needed. Robust NMR magnets can be made from permanent magnets like those used for NMR spectroscopy in the 1960s and 1970s. But to achieve high resolution for standard sample volumes, the permanent magnets then were as big as superconducting magnets today and weighed several hundred kilograms. Considering that the magnetic field strength remains constant when the volume of the magnet is scaled down to gain portability and that fields of up to 2 T are generated by permanent magnets, small magnets would offer a sensitivity only a factor of three smaller than that achieved in a standard (7 T) superconducting magnet (see the dotteddashed lines in Figure 1). This limitation is an affordable price to be paid for a small and portable system. However, a second factor seriously compromises the signal-to-noise ratio in the miniaturization process: the reduction of sample volume. For each magnet geometry the ratio between the magnet size and the size of the sensitive volume is a constant. When the size of the magnet is reduced, a smaller volume of highfield homogeneity is generated. For example, if the oldfashioned Varian T-60 magnet, with a volume of about 1 m, is reduced to palm-size dimensions, a sensitivity loss of about three orders of magnitude is expected (circle in Figure 1). Although this approach is valid in cases where the amount of sample is limited (capillary NMR), this sensitivity loss is simply unacceptable for most applications. We report herein on the construction of a small permanent magnet with an extraordinarily homogeneous magnetic field B0 suitable for measuring H NMR spectra of solutions in standard 5 mm NMR sample tubes (Figure 2). Weighing only 500 grams, the magnet can be transported along with the spectrometer, and NMR measurements can be performed on demand with this robust device at minimal maintenance cost. To efficiently reduce the sensor volume by three orders of magnitude over that of typical C-magnet designs, individual magnet blocks were compactly arranged in a cylindrical array based on the design by Halbach. This array provides a generous volume for sample positioning (large bore/magnet size ratio), and generates a magnetic field perpendicular to its cylinder axis (Figure 2), which allows the use of sensitive solenoidal radio-frequency (rf) coils to detect the NMR signals. In theory, the magnetic field generated by an infinitely long magnet built from perfect magnet blocks would be highly homogeneous along the length of the sample tube with almost zero stray field. However, in practice, the finite length of the magnet and the statistical imperfections of the sintered magnet blocks deteriorate the predicted homogeneity by several orders of magnitude. The new design presented herein combines three Halbach rings with different geometric proportions optimized to account for the field distortions along the cylinder axis due to the finite magnet length. To tackle the important source of inhomogeneity introduced by the variability of the pieces, each ring is composed of fixed trapezoidal elements with parallel gaps between them that guide the movement of rectangular magnet blocks (Figure 2). These pieces can be moved radially in and out to mechanically shim the magnetic field with highly efficiency and accuracy. By displacing the rectangular blocks in each ring with defined angular modulations and amplitudes, it is possible to independently Figure 1. Signal-to-noise ratio (SNR) for permanent and superconducting magnets as a function of the field strength B0. Squares show the SNR for water in a 5 mm NMR tube. Dashed and dotted lines correspond to solenoidal and birdcage rf coils used with permanent and superconducting magnets, respectively. The circle indicates the SNR value for a reduced sample volume in a capillary with a diameter of 0.3 mm.

Interaction Domain on Thioredoxin for Pseudomonas aeruginosa 5′-Adenylylsulfate Reductase

NMR spectroscopy has been used to map the interaction domain on Escherichia coli thioredoxin for the thioredoxin- dependent 5'-adenylylsulfate reductase from Pseudomonas aeruginosa (PaAPR). Seventeen thioredoxin amino acids, all clustered around Cys-32 (the more surface-exposed of the two active-site cysteines), have been located at the PaAPR binding site. The center of the binding domain is dominated by nonpolar amino acids, with a smaller number of charged and polar amino acids located on the periphery of the site. Twelve of the amino acids detected by NMR have non-polar, hydrophobic side chains, including one aromatic amino acid (Trp-31). Four of the thioredoxin amino acids at the PaAPR binding site have polar side chains (Lys-36, Asp-61, Gln-62 and Arg-73), with three of the four having charged side chains. Site-directed mutagenesis experiments have shown that replacement of Lys-36, Asp-61, and Arg-73 and of the absolutely conserved Trp-31 significantly decreases the V(max) for the PaAPR-catalyzed reduction of 5'-adenylylsulfate, with E. coli thioredoxin serving as the electron donor. The most dramatic effect was observed with the W31A variant, which showed no activity as a donor to PaAPR. Although the thiol of the active-site Cys-256 of PaAPR is the point of the initial nucleophilic attack by reduced thioredoxin, mutagenic replacement of Cys-256 by serine has no effect on thioredoxin binding to PaAPR.

In vivo Incorporation of Unnatural Amino Acids to Probe Structure, Dynamics, and Ligand Binding in a Large Protein by Nuclear Magnetic Resonance Spectroscopy

In vivo incorporation of isotopically labeled unnatural amino acids into large proteins drastically reduces the complexity of nuclear magnetic resonance (NMR) spectra. Incorporation is accomplished by coexpressing an orthogonal tRNA/aminoacyl-tRNA synthetase pair specific for the unnatural amino acid added to the media and the protein of interest with a TAG amber codon at the desired incorporation site. To demonstrate the utility of this approach for NMR studies, 2-amino-3-(4-(trifluoromethoxy)phenyl)propanoic acid (OCF 3Phe), (13)C/(15)N-labeled p-methoxyphenylalanine (OMePhe), and (15)N-labeled o-nitrobenzyl-tyrosine (oNBTyr) were incorporated individually into 11 positions around the active site of the 33 kDa thioesterase domain of human fatty acid synthase (FAS-TE). In the process, a novel tRNA synthetase was evolved for OCF 3Phe. Incorporation efficiencies and FAS-TE yields were improved by including an inducible copy of the respective aminoacyl-tRNA synthetase gene on each incorporation plasmid. Using only between 8 and 25 mg of unnatural amino acid, typically 2 mg of FAS-TE, sufficient for one 0.1 mM NMR sample, were produced from 50 mL of Escherichia coli culture grown in rich media. Singly labeled protein samples were then used to study the binding of a tool compound. Chemical shift changes in (1)H-(15)N HSQC, (1)H-(13)C HSQC, and (19)F NMR spectra of the different single site mutants consistently identified the binding site and the effect of ligand binding on conformational exchange of some of the residues. OMePhe or OCF 3Phe mutants of an active site tyrosine inhibited binding; incorporating (15)N-Tyr at this site through UV-cleavage of the nitrobenzyl-photocage from oNBTyr re-established binding. These data suggest not only robust methods for using unnatural amino acids to study large proteins by NMR but also establish a new avenue for the site-specific labeling of proteins at individual residues without altering the protein sequence, a feat that can currently not be accomplished with any other method.

4,4-Dimethyl-4-silapentane-1-ammonium trifluoroacetate (DSA), a promising universal internal standard for NMR-based metabolic profiling studies of biofluids, including blood plasma and serum

Nuclear magnetic resonance (NMR)-based metabolic profiling of biofluids and tissues are of key interest to enhance biomarker discovery for disease, drug efficacy and toxicity studies. Urine and blood plasma/serum are the biofluids of most interest as they are the most accessible in both clinical and preclinical studies. However, proteinaceous fluids, such as blood serum or plasma, represent the greatest technical challenge since the chemical shift (δ) and line-width (ν1/2) of internal standards currently used for aqueous NMR samples are greatly affected by protein binding. We have therefore investigated the suitability of 4,4-dimethyl-4-silapentane-1-ammonium trifluoroacetate (DSA) as a universal internal standard for biofluids. Proton (1H) NMR spectroscopy was used to determine the effect of serum pH (3, 7.4 and 10) and DSA concentration on the overall lineshape and position of the trimethylsilyl resonance of DSA. The results were compared to that of 3-(trimethylsilyl)propionic acid sodium salt (TSP). Both the chemical shift and line-width of the DSA peak were not significantly affected by pH or DSA concentration, whereas these parameters for TSP showed large variations due to protein binding. Furthermore, the peak area of DSA correlated linearly with its concentration under all pH conditions, whilst no linear correlation was observed with TSP. Overall, in contrast to TSP, these results support the use of DSA as an accurate universal internal chemical shift reference and concentration/normalisation standard for biofluids. In the case of proteinaceous biofluids such as serum, where no current standard is available, this offers a considerable saving in both operator and spectrometer time.