Normal Phase Mode Research Articles

Chromatographic performance of synthetic polycrystalline diamond as a stationary phase in normal phase high performance liquid chromatography

The chromatographic properties of high pressure high temperature synthesised diamond (HPHT) are investigated in normal phase mode of high performance liquid chromatography. Purified nonporous irregular shape particles of average particles size 1.2μm and specific surface area 5.1m2g−1 were used for packing 100×4.6mm ID or 50×4.6mm ID stainless steel columns. The retention behaviour of several classes of compounds including alkyl benzenes, polyaromatic hydrocarbons (PAH), alkylphenylketones, phenols, aromatic acids and bases were studied using n-hexane-2-propanol mixtures as mobile phase. The results are compared with those observed for microdispersed sintered detonation nanodiamond (MSDN) and porous graphitic carbon (PGC). HPHT diamond revealed distinctive separation selectivity, which is orthogonal to that observed for porous graphitic carbon; while selectivities of HPHT diamond and microdispersed sintered detonation nanodiamonds are similar. Owing to non-porous particle nature, columns packed with high pressure high temperature diamond exhibited excellent mass transfer and produce separations with maximum column efficiency of 128,200 theoretical plates per meter.

Preparation and Evaluation of HPLC Chiral Stationary Phases Based on Cationic/Basic Derivatives of Cyclofructan 6

The cyclofructan 6 (CF6) macrocyclic-oligosaccharide was derivatized with five different substituents able to bear positive charges: propyl imidazole, methyl benzimidazole, dimethyl aminopropyl, pyridine, and dimethyl aminophenyl. The derivatized cyclofructans were reacted with triethoxysilyl-propylisocyanate as a linker to bond them to 5 µm spherical silica gel particles and then used to prepare liquid chromatography columns. The bonded silica particles were analyzed to establish the bonding densities. A set of 34 chiral compounds including acids, neutral compounds, and bases was tested with nine different mobile phase compositions including two reverse phase (RP) acetonitrile/pH 4 buffer, three polar organic (PO) acetonitrile/methanol, and four normal phase (NP) heptane/ethanol mobile phases. No compounds could be separated in the RP mode. Eight compounds only could be enantioseparated in the PO mode and 21 compounds in the NP mode. The most effective chiral stationary phase was the propyl imidazole derivatized CF6 phase, provided no more than six imidazole substituents and two linkers are attached per CF6 unit.

Separations of four groups of analogues on cyclofructan based columns

The separations of the immunosuppressive reagents, capsaicinoids, vitamin E, curcumins on cyclofructan based stationary phases containing polystyrene supported native cyclofructan (MCI Gel CRS100), silica supported native cyclofructan (Frulic N), silica supported isopropyl carbamate cyclofructan 6 (Larihc P), silica supported R-naphthylethyl carbamate cyclofructan 6 (Larihc RN) in normal phase HPLC mode were studied. From the investigation it showed that the column MCI Gel CRS100 was more suitable for the separation in normal phase than in hydrophilic interaction liquid chromatography. Derivatized cyclofructan stationary phases, Larihc P and Larihc RN, showed better selectivities in comparison with the native cyclofructan stationary phases. Trifluoroacetic acid had less influence on resolution on cyclofructan based stationary phases in normal phase mode.

Enantioseparation of 3α-acyloxy-6β-acetoxyltropane compounds with Chiralpak AD and Chiralcel OD-H chiral stationary phases

Six 3α-acyloxy-6β-acetoxyltropane compounds were enantioseparated by high performance liquid chromatography with amylose-based chiral stationary phase Chiralpak AD and cellulose-based chiral stationary phase Chiralcel OD-H in the normal phase mode, using various mixtures of n-hexane-isopropanol as mobile phases. The enantiomers 6 were completely separated on a Chiralpak AD column. While the enantiomers 1, 4 and 3 got complete, baseline and basic separation respectively on a Chiralcel OD-H column. However, the enantiomers 6 were partially separated on the Chiralcel OD-H column and enantiomers 1 could not be separated on the Chiralpak AD column. This indicated that the cave structure of chiral stationary phase exerted great effect on the resolutions. The enantiomers 5 could not be separated on both of the chiral stationary phases. The main possible mechanism of chiral resolution involves in spatial adaptability and molecular interactions between chiral stationary phases and compounds. The substituents in C-3α position of 3α-acyloxy-6β-acetoxyltropane compounds play an important role in spatial adaptability. And it was suggested that the steric hindrance effect of the substituent in C-3α position was the key factor of determining the selective recognition of chiral stationary phase to the enantiomers of 3α-acyloxy-6β-acetoxyltropane compounds. Besides, the molecular interaction, such as π-π interaction, also exerts great influence to the chiral resolution. This study provides a reference for the enantioseparation of many other tropane derivatives.

Synthesis of hierarchically porous polymethylsilsesquioxane monoliths with controlled mesopores for HPLC separation

Sol–gel synthesis of macroporous polymethylsilsesquioxane (PMSQ) monoliths has been successful over the past decade, and applications to separation media have been investigated. However, the control of mesopores to tailor hierarchical porosity, which is promising for improvement of the separation efficiency, remains challenging. In particular, an independent control of meso- and macropores has not been achieved in PMSQ. Herein we present a method to synthesize PMSQ monoliths with well-defined macropores and controlled mesostructure (pore size ranging from 10 to 60 nm, total pore volume from 0.2 to 0.6 cm3 g−1) via sol–gel accompanied by phase separation. Different Pluronic-type nonionic surfactants were used to control phase separation of the hydrophobic PMSQ network in aqueous media. Due to different packing density of the colloidal PMSQ constituents in the continuous skeletons in the micrometer-scale (termed as macropore skeletons) and their rearrangements through the hydrothermal post-treatment under basic conditions, mesopore characteristics have been successfully controlled independently of the preformed macropore structure. Separation columns for high-performance liquid chromatography (HPLC) have been fabricated using the PMSQ monoliths, and acceptable separation performances in both the reversed-phase and normal-phase modes have been demonstrated due to the presence of both hydrophilic silanol groups and hydrophobic methyl groups.

Erratum to: Chiral Separation of 4-Iminoflavan Derivatives on Several Polysaccharide-Based Chiral Stationary Phases by HPLC

The HPLC enantiomeric separation of seven 4-iminoflavans was successfully accomplished in the normal phase mode using six polysaccharide-based chiral stationary phases namely, Chiralcel®OD-H, Chiralcel®OD, Chiralcel®OJ, Chiralpak®AD, Chiralpak®IA and Chiralpak®IB under normal and polar organic phase modes. The resolution depended on nature and concentration of alcoholic modifier. The results demonstrate clearly that the chromatographic system based on the coated and immobilized type Chiralpak®IB and Chiralcel®OD-H CSPs provide a powerful analytical tool for enantiomeric separation of all the 4-iminoflavans used in this study.

Comparison of superficially porous and fully porous silica supports used for a cyclofructan 6 hydrophilic interaction liquid chromatographic stationary phase

A new HILIC stationary phase comprised of native cyclofructan-6 (CF6) bonded to superficially porous silica particles (2.7μm) was developed. Its performance was evaluated and compared to fully porous silica particles with 5μm (commercially available as FRULIC-N) and 3μm diameters. Faster and more efficient chromatography was achieved with the superficially porous particles (SPPs). The columns were also evaluated in the normal phase mode. The peak efficiency, analysis time, resolution, and overall separation capabilities in both HILIC and normal phase modes were compared. The analysis times using the superficially porous based column in HILIC mode were shorter and the theoretical plates/min were higher over the entire range of flow rates studied. The column containing the superficially porous particles demonstrated higher optimum flow rates than the fully porous particle packed columns. At higher flow rates, the advantages of the superficially porous particles was more pronounced in normal phase separations than in HILIC, clearly demonstrating the influence that the mode of chromatography has on band broadening. However, the minimum reduced plate heights (hmin) were typically lower in HILIC than in the normal phase mode. Overall, the superficially porous particle based CF6 column showed clear advantages over the fully porous particle columns, in terms of high throughput and efficient separations of polar compounds in the HILIC mode.

Influence of the nature of alkyl substituents on the high-performance liquid chromatography enantioseparation and retention of new atropisomeric 1,1′-bibenzimidazole derivatives on amylose tris(3,5-dimethylphenylcarbamate) chiral stationary phase

Six new atropisomeric heteroarenes were synthesized by connecting two 2-alkylbenzimidazole fragments via N–N junction. They differ by the substituent nature (methyl, ethyl, propyl, butyl, pentyl and hexyl) of the aliphatic function. The novel atropisomeric compounds were used as chiral probes to study the chromatographic behavior of the amylose tris(3,5-dimethylphenyl carbamate) (Chiralpak AD-3) chiral stationary phase (CSP) under normal phase mode. The pivotal role of the length and flexibility of the 2,2′-alkyl groups on retention, enantioselectivity and enantiomer elution order was demonstrated by enantioselective HPLC analysis. Additional information on the chiral recognition mechanism was obtained from the evaluation of the correlated thermodynamic data.

Synthesis of novel perphenylcarbamated β-cyclodextrin based chiral stationary phases via thiol-ene click chemistry.

Novel cyclodextrin (CD) chiral stationary phases (CD-CSPs) with well-defined structure have been successfully synthesized by immobilization of mono/di(10-undecenoyl)-perphenylaminocarbonyl β-CD on the 3-mercaptopropyl functionalized silica gel via thiol-ene click chemistry. The phenyl carbamate groups on the rims of CD extended the cavity of CD-CSPs, which facilitated the formation of inclusion complex with various types of racemic compounds under RP mode, and also improved the π-π stacking interaction, dipole-dipole interaction, and hydrogen bonding interaction with racemic compounds under normal phase mode. Fifteen racemic compounds were successfully separated on this CD-CSP with HPLC, and the chromatographic results also demonstrated that thiol-ene click chemistry affords a facile approach for preparation of CSPs.

Toward enantioselective nano ultrahigh-performance liquid chromatography with Whelk-O1 chiral stationary phase.

In this study, a Whelk-O1 chiral stationary phase immobilized on 2.5μm silica particles was employed in nanoLC. Two nanocolumns (180 and 250mm long, 75μm id) with a single polymeric organic monolithic outlet frit were packed under high-pressure ultrasonic-assisted packing procedure. The monolithic outlet frit was prepared by thermal polymerization of methacrylate-based monomers affording high-mechanical stability and high-pressure resistance. Very efficient enantioseparations with more than 70000 plates/m were achieved in normal phase mode by eluting (+/-) acenaphthenol. Nanocolumns were also tested in RP mode by using on-line MS detection with nano-spray ESI ion source. Kinetic performances of columns in RP mode were comparable to those in normal phase-conditions.

High‐performance liquid chromatography enantioseparation of polyhalogenated 4,4′‐bipyridines on polysaccharide‐based chiral stationary phases under multimodal elution

An investigation on the high-performance liquid chromatography enantioseparation of 12 polyhalogenated 4,4'-bipyridines on polysaccharide-based chiral stationary phases is described. The overall study was directed toward the generation of efficient separations in order to obtain pure atropisomers that will serve as ligands for building homochiral metal organic frameworks. Four coated columns--namely, Lux Cellulose-1, Lux Cellulose-2, Lux Cellulose-4, and Lux Amylose-2--and two immobilized columns--namely, Chiralpak IC and IA--were used under normal, polar organic, and reversed-phase elution modes. Moreover, Chiralcel OJ was considered under normal-phase and polar organic conditions. The effect of the chiral selector and mobile phase composition on the enantioseparation, the enantiomer elution order and the beneficial effect of nonstandard solvents were studied. The effect of water in the mobile phase on the enantioselectivity and retention was investigated and retention profiles typical of hydrophilic interaction liquid chromatography were observed. Interesting phenomena of solvent-induced enantiomer elution order reversal occurred under normal-phase mode. All the considered 4,4'-bipyridines were enantioseparated at the multimilligram level.

Determination of levamisole and tetramisole in seized cocaine samples by enantioselective high-performance liquid chromatography and circular dichroism detection

Levamisole, an anthelmintic drug, has been increasingly employed as an adulterant of illicit street cocaine over the last decade; recently, the use of tetramisole, the racemic mixture of levamisole and its enantiomer dexamisole, was also occasionally observed. A new enantioselective high-performance liquid chromatography (HPLC) method, performed on cellulose tris(3,5-dimethylphenylcarbamate) chiral stationary phases in normal-phase mode, was validated to determine the enantiomeric composition of tetramisole enantiomers in seized cocaine samples. Furthermore, the hyphenation of the validated HPLC method with a circular dichroism (CD) detection system allowed the direct determination of elution order and a selective monitoring of levamisole and dexamisole in the presence of possible interferences. The method was applied to the identification and quantitation of the two enantiomers of tetramisole in seized street cocaine samples.

Single-step approach for fabrication of vancomycin-bonded silica monolith as chiral stationary phase

A vancomycin-bonded silica monolithic column for capillary electrochromatography (CEC) was prepared by a single-step in situ sol–gel approach. This sol–gel process incorporates a synthetic sol–gel precursor which contains a macrocyclic antibiotic, vancomycin, to form a porous silica network inside a fused-silica capillary. To avoid degradation of vancomycin during the column fabrication, a mild step was adopted into the sol–gel process. The performance of the vancomycin chiral stationary phase was investigated by CEC in both the reversed-phase mode and the normal-phase mode. The vancomycin chiral stationary phase was optimized with respect to vancomycin loading in the reversed-phase mode for chiral separation of thalidomide enantiomers. The best efficiency and resolution values of 94600plates/m and 5.79, respectively, were achieved. The optimized column was further applied to chiral separation of alprenolol enantiomers. A plate height of less than 7μm for the first eluted enantiomer of alprenolol was obtained in an aqueous mobile phase at a flow rate of 0.74mm/s. Using enantiomers of seven β-blockers and some other basic enantiomers as test analytes, separation efficiencies of up to 148100plates/m in the reversed-phase mode and up to 138100plates/m in the normal-phase mode were achieved.

Novel stereoselective high-performance liquid chromatographic method for simultaneous determination of guaifenesin and ketorolac enantiomers in human plasma.

A novel method was developed for the simultaneous determination of guaifenesin (GUA) and ketorolac tromethamine (KET) enantiomers in plasma samples. Since GUA probably increases the absorption of coadministered drugs (e.g., KET), it would be extremely important to monitor KET plasma levels for the purpose of dose adjustment with a subsequent decrease in the side effects. Enantiomeric resolution was achieved on a polysaccharide-based chiral stationary phase, amylose-2, as a chiral selector under the normal phase (NP) mode and using ornidazole (ORN) as internal standard. This innovative method has the advantage of the ease and reliability of sample preparation for plasma samples. Sample clean-up was based on simply using methanol for protein precipitation followed by direct extraction of drug residues using ethanol. Both GUA and KET enantiomers were separated using an isocratic mobile phase composed of hexane/isopropanol/trifluoroacetic acid, 85:15:0.05 v/v/v. Peak area ratios were linear over the range 0.05-20 µg/mL for the four enantiomers S (+) GUA, R (-) GUA, R (+) KET, and S (-) KET. The method was fully validated according to the International Conference on Harmonization (ICH) guidelines in terms of system suitability, specificity, accuracy, precision, robustness, and solution stability. Finally, this procedure was innovative to apply the rationale of developing a chiral high-performance liquid chromatography (HPLC) procedure for the simultaneous quantitative analysis of drug isomers in clinical samples.

High-performance liquid chromatographic enantioseparation of 3,5-disubstituted hydantoins analogs and temperature-induced reversals of elution orders on a polysaccharide-based chiral stationary phase

Enantioseparations were achieved for eleven 3,5-disubstituted hydantoins in HPLC under the normal phase mode using Chiralpak IA. The effects of polar alcoholic modifier and column temperature on retention and enantioseparation were determined. Importantly, we found two kinds of enantiomer elution order (EEO) reversals, which include solvent-induced EEO reversal for compound 9 and temperature-induced EEO reversals for compound 3 and compound 6. The phenomena of these EEO reversals were described for the first time in present work, which is helpful to elucidate the chiral separation mechanism of these hydantoins.

Adamantyl-group containing mixed-mode acrylamide-based continuous beds for capillary electrochromatography. Part IV: Investigation of the chromatographic efficiency dependent on the retention mode

In our previous work we have described the synthesis, characterization, and optimization of the chromatographic efficiency of a highly crosslinked macroporous mixed-mode acrylamide-based monolithic stationary phase synthesized by in situ free radical copolymerization of cyclodextrin-solubilized N-adamantyl acrylamide, piperazinediacrylamide, methacrylamide and vinylsulfonic acid in aqueous medium in pre-treated fused silica capillaries of 100μm I.D. In the present work, we study with different classes of neutral analytes (with varied hydrophobicity) the impact of the type of retention mode (influenced by the type of analyte and the mobile phase composition) and the impact of the solute functionality on the chromatographic efficiency and peak symmetry with a monolith synthesized under optimized synthesis parameters. With this monolithic capillary high separation efficiencies (up to ca. 220,000m−1) are obtained for the separation of different analyte classes (alkylphenones, nitrotoluenes, and phenolic compounds with k=0.2–0.55) in the reversed-phase mode, in the normal-phase mode, and in the mixed mode. For neutral alkylanilines (k<0.25) plate numbers of about 300,000m−1 are routinely reached in the reversed-phase elution mode. For phenolic solutes separated in a mixed mode there is a solute-specific influence on peak symmetry and chromatographic efficiency. With increasing efficiency of the monolith, axial diffusion becomes an important mechanism of band broadening. For those peaks, which do not show a significant asymmetry (asymmetry factor ≤1.05), it is confirmed that plate heights gained via the tangent method are equivalent to those gained via moment analysis.

Enantiomeric separation of functionalized ethano-bridged Tröger bases using macrocyclic cyclofructan and cyclodextrin chiral selectors in high-performance liquid chromatography and capillary electrophoresis with application of principal component analysis

The enantiomeric separation of a series of racemic functionalized ethano-bridged Tröger base compounds was examined by high performance liquid chromatography (HPLC) and capillary electrophoresis (CE). Using HPLC and CE the entire set of 14 derivatives was separated by chiral stationary phases (CSPs) and chiral additives composed of cyclodextrin (native and derivatized) and cyclofructan (derivatized). Baseline separations (Rs≥1.5) in HPLC were achieved for 13 of the 14 compounds with resolution values as high as 5.0. CE produced 2 baseline separations. The separations on the cyclodextrin CSPs showed optimum results in the reversed phase mode, and the LARIHC™ cyclofructan CSPs separations showed optimum results in the normal phase mode. HPLC separation data of the compounds was analyzed using principal component analysis (PCA). The PCA biplot analysis showed that retention is governed by the size of the R1 substituent in the case of derivatized cyclofructan and cyclodextrin CSPs, and enantiomeric resolution closely correlated with the size of the R2 group in the case of non-derivatized γ-cyclodextrin CSP. It is clearly shown that chromatographic retention is necessary but not sufficient for the enantiomeric separations of these compounds.

Quinolinium ionic liquid-modified silica as a novel stationary phase for high-performance liquid chromatography

A novel stationary phase based on quinolinium ionic liquid-modified silica was prepared and evaluated for high-performance liquid chromatography. The stationary phase was investigated via normal-phase (NP), reversed-phase (RP), and anion-exchange (AE) chromatographic modes, respectively. Polycyclic aromatic hydrocarbons, phthalates, parabens, phenols, anilines, and inorganic anions were used as model analytes in chromatographic separation. Using the newly established column, organic compounds were separated successfully by both NP and RP modes, and inorganic anions were also separated completely by AE mode. The obtained results indicated that the stationary phase could be applied in different chromatographic modes, with multiple-interaction mechanism including van der Waals forces (dipole-dipole, dipole-induced dipole interactions), hydrophobic, π-π stacking, electrostatic forces, hydrogen bonding, anion-exchange interactions, and so on. The column packed with the stationary phase was applied to analyze phthalates and parabens in hexane extracts of plastics. Tap water and bottled water were also analyzed by the column, and nitrate was detected as 20.1 and 13.8 mg L(-1), respectively. The results illustrated that the stationary phase was potential in practical applications.

Novel chiral stationary phases based on peptoid combining a quinine/quinidine moiety through a C9‐position carbamate group

By connecting a quinine or quinidine moiety to the peptoid chain through the C9-position carbamate group, we synthesized two new chiral selectors. After immobilizing them onto 3-mercaptopropyl-modified silica gel, two novel chiral stationary phases were prepared. With neutral, acid, and basic chiral compounds as analytes, we evaluated these two stationary phases and compared their chromatographic performance with chiral columns based on quinine tert-butyl carbamate and the previous peptoid. From the resolution of neutral and basic analytes under normal-phase mode, it was found that the new stationary phases exhibited much better enantioselectivity than the quinine tert-butyl carbamate column; the peptoid moiety played an important role in enantiorecognition, which controlled the elution orders of enantiomers; the assisting role of the cinchona alkaloid moieties was observed in some separations. Under acid polar organic phase mode, it was proved that cinchona alkaloid moieties introduced excellent enantiorecognitions for chiral acid compounds; in some separations, the peptoid moiety affected enantioseparations as well. Overall, chiral moieties with specific enantioselectivity were demonstrated to improve the performance of peptoid chiral stationary phase efficiently.

Reprint of: Enantiomeric separation of functionalized ethano-bridged Tröger bases using macrocyclic cyclofructan and cyclodextrin chiral selectors in high-performance liquid chromatography and capillary electrophoresis with application of principal component analysis.

The enantiomeric separation of a series of racemic functionalized ethano-bridged Tröger base compounds was examined by high performance liquid chromatography (HPLC) and capillary electrophoresis (CE). Using HPLC and CE the entire set of 14 derivatives was separated by chiral stationary phases (CSPs) and chiral additives composed of cyclodextrin (native and derivatized) and cyclofructan (derivatized). Baseline separations (Rs ≥ 1.5) in HPLC were achieved for 13 of the 14 compounds with resolution values as high as 5.0. CE produced 2 baseline separations. The separations on the cyclodextrin CSPs showed optimum results in the reversed phase mode, and the LARIHC cyclofructan CSPs separations showed optimum results in the normal phase mode. HPLC separation data of the compounds was analyzed using principal component analysis (PCA). The PCA biplot analysis showed that retention is governed by the size of the R1 substituent in the case of derivatized cyclofructan and cyclodextrin CSPs, and enantiomeric resolution closely correlated with the size of the R2 group in the case of non-derivatized γ-cyclodextrin CSP. It is clearly shown that chromatographic retention is necessary but not sufficient for the enantiomeric separations of these compounds.