Nonlinear Spectroscopic Techniques Research Articles

Twist and Stretch: Assignment and Surface Charge Sensitivity of a Water Combination Band and Its Implications for Vibrational Sum Frequency Spectra Interpretations.

The vibrational spectrum of water at hydrophobic/hydrophilic interfaces is crucial to understanding complex surface chemistry phenomena. Vibrational sum frequency (VSF) spectroscopy is a valuable nonlinear spectroscopic technique for exploring the details of vibrational spectra of molecules at surfaces. However, spectral assignments and analysis of VSF spectra are often more nuanced than in linear spectroscopy. This study is aimed at understanding the source of the broad VSF signal in the oil-water surface water spectrum at energies slightly higher than traditionally examined, beyond the unbound free OH oscillator of surface water molecules. Analyzing isotopic dilutions of the aqueous solvent with VSF spectroscopy, we demonstrate that this signal is due to a combination band of water stretch and libration motions. The spectral characteristics of this band are found to be highly sensitive to the sign and magnitude of the surface charge induced by adsorption of both anionic and cationic surfactants. The results have implications for VSF measurements of the C-H stretching vibrations of various adsorbates when studied with D2O as the aqueous solvent. Because the vibrational signal from the water combination band is dependent on surface charge, it is imperative to include the presence of the combination band when fitting surface spectra.

Generation and measurement of intense few-femtosecond superradiant extreme-ultraviolet free-electron laser pulses

Free-electron lasers producing ultrashort pulses with high peak power promise to extend ultrafast non-linear spectroscopic techniques into the extreme-ultraviolet–X-ray regime. Key aspects are the synchronization between pump and probe, and the control of the pulse properties (duration, intensity and coherence). Externally seeded free-electron lasers produce coherent pulses that can be synchronized with femtosecond accuracy. An important goal is to shorten the pulse duration, but the simple approach of shortening the seed is not sufficient because of the finite-gain bandwidth of the conversion process. An alternative is the amplification of a soliton in a multistage, superradiant cascade: here, we demonstrate the generation of few-femtosecond extreme-ultraviolet pulses, whose duration we measure by autocorrelation. We achieve pulses four times shorter, and with a higher peak power, than in the standard high-gain harmonic generation mode and we prove that the pulse duration matches the Fourier transform limit of the spectral intensity distribution. By amplifying a soliton in a multistage cascade, few-femtosecond extreme-ultraviolet free-electron laser pulses are achieved.

Probing the Mineral-Water Interface with Nonlinear Optical Spectroscopy.

The interaction between minerals and water is manifold and complex: the mineral surface can be (de)protonated by water, thereby changing its charge; mineral ions dissolved into the aqueous phase screen the surface charges. Both factors affect the interaction with water. Intrinsically molecular‐level processes and interactions govern macroscopic phenomena, such as flow‐induced dissolution, wetting, and charging. This realization is increasingly prompting molecular‐level studies of mineral–water interfaces. Here, we provide an overview of recent developments in surface‐specific nonlinear spectroscopy techniques such as sum frequency and second harmonic generation (SFG/SHG), which can provide information about the molecular arrangement of the first few layers of water molecules at the mineral surface. The results illustrate the subtleties of both chemical and physical interactions between water and the mineral as well as the critical role of mineral dissolution and other ions in solution for determining those interactions.

Vibrational Spectroscopic Map, Vibrational Spectroscopy, and Intermolecular Interaction.

Vibrational spectroscopy is an essential tool in chemical analyses, biological assays, and studies of functional materials. Over the past decade, various coherent nonlinear vibrational spectroscopic techniques have been developed and enabled researchers to study time-correlations of the fluctuating frequencies that are directly related to solute-solvent dynamics, dynamical changes in molecular conformations and local electrostatic environments, chemical and biochemical reactions, protein structural dynamics and functions, characteristic processes of functional materials, and so on. In order to gain incisive and quantitative information on the local electrostatic environment, molecular conformation, protein structure and interprotein contacts, ligand binding kinetics, and electric and optical properties of functional materials, a variety of vibrational probes have been developed and site-specifically incorporated into molecular, biological, and material systems for time-resolved vibrational spectroscopic investigation. However, still, an all-encompassing theory that describes the vibrational solvatochromism, electrochromism, and dynamic fluctuation of vibrational frequencies has not been completely established mainly due to the intrinsic complexity of intermolecular interactions in condensed phases. In particular, the amount of data obtained from the linear and nonlinear vibrational spectroscopic experiments has been rapidly increasing, but the lack of a quantitative method to interpret these measurements has been one major obstacle in broadening the applications of these methods. Among various theoretical models, one of the most successful approaches is a semiempirical model generally referred to as the vibrational spectroscopic map that is based on a rigorous theory of intermolecular interactions. Recently, genetic algorithm, neural network, and machine learning approaches have been applied to the development of vibrational solvatochromism theory. In this review, we provide comprehensive descriptions of the theoretical foundation and various examples showing its extraordinary successes in the interpretations of experimental observations. In addition, a brief introduction to a newly created repository Web site (http://frequencymap.org) for vibrational spectroscopic maps is presented. We anticipate that a combination of the vibrational frequency map approach and state-of-the-art multidimensional vibrational spectroscopy will be one of the most fruitful ways to study the structure and dynamics of chemical, biological, and functional molecular systems in the future.

Interfacial Behavior of Flux Residues and Its Impact on Copper/Underfill Adhesion in Microelectronic Packaging

AbstractIn the micro-electronics industry, flux treatment on copper is an important procedure to ensure maximum adhesion to copper. In this research, sum frequency generation (SFG) vibrational spectroscopy has been applied to investigate molecular behavior of flux molecules at buried copper and underfill (UF) interfaces in situ. SFG is a second-order nonlinear optical spectroscopic technique, which can provide molecular structural information of surfaces and interfaces with a submonolayer interface specificity. Two model fluxes, adipic acid and phenylacetic acid, and a commercial no-clean flux were examined. Without washing or heating the surface of flux-treated copper, the buried interfaces between copper (treated with flux) and UF are dominated by ordered epoxy in UF. Washing or heating the surface of flux-treated copper leads to disordered copper/UF interfaces, greatly increasing the adhesion. The buried interfacial structures obtained from SFG results are well correlated to the adhesion strengths measured using the lap shear testing method. This research demonstrates the importance of the washing or heating steps of substrate surfaces to increase the interfacial adhesion.

Removing non-resonant background from CARS spectra via deep learning

Broadband Coherent Anti-Stokes Raman Scattering (B-CARS) is a powerful label-free nonlinear spectroscopy technique allowing one to measure the full vibrational spectrum of molecules and solids. B-CARS spectra, however, suffer from the presence of a spurious signal, called non-resonant background (NRB), which interferes with the resonant vibrational one, distorting the line shapes and degrading the chemical information. While several numerical techniques are available to remove this unwanted contribution and extract the resonant vibrational signal of interest, they all require the user’s intervention and sensitively depend on the spectral shape of the NRB, which needs to be measured independently. In this work, we present a novel approach to remove NRB from B-CARS spectra based on deep learning. Thanks to the high generalization capability offered by the deep architecture of the designed neural network, trained through realistic simulated spectra, our fully automated model is able to process B-CARS spectra in real time and independently of the detailed shape of the NRB spectrum. This results in fast extraction of vibrational spectra without requiring user intervention or the measurement of reference spectra. We expect that this model will significantly simplify and speed-up the analysis of B-CARS spectra in spectroscopy and microscopy.

Spectroscopic signatures of electron-phonon coupling in silicon-vacancy centers in diamond

Vacancy centers in diamond have proven to be a viable solid-state platform for quantum coherent opto-electronic applications. Among the variety of vacancy centers, silicon-vacancy (SiV) centers have recently attracted much attention as an inversion-symmetric system that is less susceptible to electron-phonon interactions. Nevertheless, phonon-mediated processes still degrade the coherent properties of SiV centers, however characterizing their electron-phonon coupling is extremely challenging due to their weak spectroscopic signatures and remains an open experimental problem. In this paper we theoretically investigate signatures of electron-phonon coupling in simulated linear and nonlinear spectra of SiV centers. We demonstrate how even extremely weak electron-phonon interactions, such as in SiV centers, may be completely characterized via nonlinear spectroscopic techniques and even resolved between different fine-structure transitions.

Excited-state investigations of meso-mono-substituted-(amino-ferrocenyl)porphyrins: Experimental and theoretical approaches

The spectroscopic study and characterization of mono-(amino-ferrocenyl) porphyrins has increased during the last years. These molecules can be synthesized in such a way that their linear and nonlinear optical parameters are modulated, opening the possibility for new applications, such as in photodynamic therapy. In this work, we perform a spectroscopic characterization of a group of five free-base porphyrins, three of them having a C6F4 group attached to an amino-ferrocene moiety through a −NH(CH2)nNH− spacer, in which n = 2, 4 or 6. These three molecules differ by the size of the aliphatic chain. For this study, we employ linear as well as nonlinear optical spectroscopic techniques, such as the Z-Scan and time resolved fluorescence. Decay times, absorption cross-sections and quantum yields were determined, and the results suggest that, for this group of molecules, the differences in the aliphatic chain sizes joining the ferrocenyl unit to the C6F4 group at the para-position aryl ring do not influence significantly the optical parameters. Further, DFT calculations confirm that the UV–vis absorbance and the associated electronic transitions are not affected by the size of the aliphatic chain spacers. Thus, it is possible to state that these molecules can interact with biomolecules through the ferrocene unit while keeping their optical properties unchanged.

(Invited) In Situ Stimulated Raman Spectroscopy of Amorphous Cobalt Oxide Catalyst during Oxygen Evolution Electrocatalysis

Understanding the functionality of a catalyst requires understanding its in-reaction structure. Vibrational techniques can reveal detailed structural information; however, a number of challenges including background absorption in infrared and small cross sections in Raman have made the measurement difficult. In this contribution, we demonstrate stimulated Raman spectroscopy (SRS) as an in-situ probe to tackle the challenge of small cross sections in Raman. As a nonlinear spectroscopic technique, SRS has several advantages including efficiency, which will be discussed. Leveraging the improved efficiency, we apply SRS to measure the vibrational structure of an amorphous cobalt oxide catalyst during the oxygen evolution reaction (OER). Additional experiments using isotope labeling are used to identify the nature of the vibration structure. These results present the potential of SRS as a useful tool to investigate the much sought-after catalyst structure in-situ. The spectroscopic techniques, methods of analysis, and the experimental results will be presented.

X-ray Raman scattering: a building block for nonlinear spectroscopy.

Ultraintense X-ray free-electron laser pulses of attosecond duration can enable new nonlinear X-ray spectroscopic techniques to observe coherent electronic motion. The simplest nonlinear X-ray spectroscopic concept is based on stimulated electronic X-ray Raman scattering. We present a snapshot of recent experimental achievements, paving the way towards the goal of realizing nonlinear X-ray spectroscopy. In particular, we review the first proof-of-principle experiments, demonstrating stimulated X-ray emission and scattering in atomic gases in the soft X-ray regime and first results of stimulated hard X-ray emission spectroscopy on transition metal complexes. We critically asses the challenges that have to be overcome for future successful implementation of nonlinear coherent X-ray Raman spectroscopy. This article is part of the theme issue 'Measurement of ultrafast electronic and structural dynamics with X-rays'.

Multidimensional Coherent Spectroscopy of Semiconductors

AbstractOptical multidimensional coherent spectroscopy (MDCS) is a nonlinear spectroscopy technique where a material is excited by a series of laser pulses to produce a spectrum as a function of multiple frequencies. The technique's ability to elucidate excited‐state structure and interactions has made MDCS a valuable tool in the study of excitons in semiconductors. This review introduces the method and describes progress it has fostered establishing a better understanding of dephasing rates, coherent coupling mechanisms, and many‐body interactions pertaining to optically generated electronic excitations in a variety of semiconductor material systems. Emphasis is placed on nanostructured gallium arsenide quantum wells and quantum dots, on quantum dots in other III–V and II–VI semiconductors, and on atomically thin transition metal dichalcogenides. Recent technical advances and potential future directions in the field are also discussed.

Implementation of continuous fast scanning detection in femtosecond Fourier-transform two-dimensional vibrational-electronic spectroscopy to decrease data acquisition time.

Femtosecond Fourier transform two-dimensional vibrational-electronic (2D VE) spectroscopy is a recently developed third-order nonlinear spectroscopic technique to measure coupled electronic and vibrational motions in the condensed phase. The viability of femtosecond multidimensional spectroscopy as an analytical tool requires improvements in data collection and processing to enhance the signal-to-noise ratio and increase the amount of data collected in these experiments. Here a continuous fast scanning technique for the efficient collection of 2D VE spectroscopy is described. The resulting 2D VE spectroscopic method gains sensitivity by reducing the effect of laser drift, as well as decreasing the data collection time by a factor of 10 for acquiring spectra with a high signal-to-noise ratio within 3 dB of the more time intensive step scanning methods. This work opens the door to more comprehensive studies where 2D VE spectra can be collected as a function of external parameters such as temperature, pH, and polarization of the input electric fields.

Investigation of dynamic optical behavior of CeO2 thin film using terahertz spectroscopy

Dynamic optical behavior of CeO2 thin film has been investigated using Terahertz spectroscopy at room temperature by exciting with different amplitude pulses. The CeO2 thin films have been deposited on Si (100) substrate by RF magnetron sputtering technique. It has been observed that the optical density increases at 0.75 THz on the incident of pulse ≥100 kV/cm indicating that it is possible to induce extremely large amplitude motions in the harmonic potential of the material by direct excitation of CeO2 vibrations with intense THz pulse. This study further shows that it is possible to control the large amplitude motions in the materials using different high power THz pulses, and in turn can control the optical properties, establishing the nonlinear spectroscopy technique for such studies.

Modeling Plasmon-Induced Hot-Carrier Transfer

In this issue of Chem , Zhang et al. use first-principle simulations (i.e., no empirically adjustable parameters) to elucidate the detailed mechanisms of plasmon-induced hot-carrier transfer at a heterojunction interface between a plasmonic gold nanomaterial and a semiconductor. Together with earlier work by Long and Prezhdo, this study shows how the donor-acceptor interaction at the interface determines the mechanism by which plasmonic excitations lead to hot-electron transfer at interfaces.

Sum frequency generation spectroscopy of tetraalkylphosphonium ionic liquids at the air-liquid interface.

Sum frequency generation (SFG) spectroscopy is a nonlinear vibrational spectroscopic technique used in the study of interfaces, due to its unique ability to distinguish surface molecules that have preferential ordering compared to the isotropic bulk. Here, a series of alkyltrioctylphosphonium chloride ionic liquids, systematically varied by cation structure, were characterized at the air-liquid interface by SFG. The effect on surface structure resulting from molecular variation (i.e., addition of cyano- and methoxy-functional groups) of the cation alkyl chain was investigated. SFG spectra in the C-H stretching region (2750-3100 cm-1) for [P8 8 8 n ][Cl], where n = 4, 5, 8, 10, 12, or 14, showed characteristic changes as the alkyl chain length was increased. Spectral profiles for n = 4, 5, 8, or 10 appeared similar; however, when the fourth alkyl chain was sufficiently long (as in the case of n = 12 or n = 14), abrupt changes occurred in the spectra. Molecular dynamics (MD) simulation of a slab of each ionic liquid (with n = 8, 10, or 12) confirmed gauche defects, with enhancement for the long alkyl chain and an abrupt increase of gauche occurrence from n = 8 to n = 10. A comparison of the tilt angle distribution from the simulation and the SFG analysis show a broad distribution of angles. Using experimental SFG spectra in conjunction with MD simulations, a comprehensive molecular picture at the surface of this unique class of liquids is presented.

Quantitative identification of chemical compounds by dual-soliton based coherent anti-Stokes Raman scattering spectroscopy

Coherent anti-Stokes Raman scattering (CARS) is a powerful nonlinear spectroscopy technique that is rapidly gaining recognition of different molecules. Unfortunately, molecular concentration information is generally not immediately accessible from the raw CARS signal due to the nonresonant background. In addition, mainstream biomedical applications of CARS are currently hampered by a complex and bulky excitation setup. Here, we establish a dual-soliton Stokes based CARS spectroscopy scheme capable of quantifying the sample molecular, using a single fiber laser. This dual-soliton CARS scheme takes advantage of a differential configuration to achieve efficient suppression of nonresonant background and therefore allows extraction of quantitative composition information. Besides, our all-fiber based excitation source can probe the most fingerprint region (1100–1800 cm−1) with a spectral resolution of 15 cm−1 under the spectral focusing mechanism, where is considerably more information contained throughout an entire spectrum than at just a single frequency within that spectrum. Systematic studies of the scope of application and several fundamental aspects are discussed. Quantitative capability is further experimentally demonstrated through the determination of oleic acid concentration based on the linear dependence of signal on different Raman vibration bands.

Effect of Interfacial Molecular Orientation on Power Conversion Efficiency of Perovskite Solar Cells.

A wide variety of charge carrier dynamics, such as transport, separation, and extraction, occur at the interfaces of planar heterojunction solar cells. Such factors can affect the overall device performance. Therefore, understanding the buried interfacial molecular structure in various devices and the correlation between interfacial structure and function has become increasingly important. Current characterization techniques for thin films such as X-ray diffraction, cross section scanning electronmicroscopy, and UV-visible absorption spectroscopy are unable to provide the needed molecular structural information at buried interfaces. In this study, by controlling the structure of the hole transport layer (HTL) in a perovskite solar cell and applying a surface/interface-sensitive nonlinear vibrational spectroscopic technique (sum frequency generation vibrational spectroscopy (SFG)), we successfully probed the molecular structure at the buried interface and correlated its structural characteristics to solar cell performance. Here, an edge-on (normal to the interface) polythiophene (PT) interfacial molecular orientation at the buried perovskite (photoactive layer)/PT (HTL) interface showed more than two times the power conversion efficiency (PCE) of a lying down (tangential) PT interfacial orientation. The difference in interfacial molecular structure was achieved by altering the alkyl side chain length of the PT derivatives, where PT with a shorter alkyl side chain showed an edge-on interfacial orientation with a higher PCE than that of PT with a longer alkyl side chain. With similar band gap alignment and bulk structure within the PT layer, it is believed that the interfacial molecular structural variation (i.e., the orientation difference) of the various PT derivatives is the underlying cause of the difference in perovskite solar cell PCE.

Interferometric 2D Sum Frequency Generation Spectroscopy Reveals Structural Heterogeneity of Catalytic Monolayers on Transparent Materials.

Molecular monolayers exhibit structural and dynamical properties that are different from their bulk counterparts due to their interaction with the substrate. Extracting these distinct properties is crucial for a better understanding of processes such as heterogeneous catalysis and interfacial charge transfer. Ultrafast nonlinear spectroscopic techniques such as 2D infrared (2D IR) spectroscopy are powerful tools for understanding molecular dynamics in complex bulk systems. Here, we build on technical advancements in 2D IR and heterodyne-detected sum frequency generation (SFG) spectroscopy to study a CO2 reduction catalyst on nanostructured TiO2 with interferometric 2D SFG spectroscopy. Our method combines phase-stable heterodyne detection employing an external local oscillator with a broad-band pump pulse pair to provide the first high spectral and temporal resolution 2D SFG spectra of a transparent material. We determine the overall molecular orientation of the catalyst and find that there is a static structural heterogeneity reflective of different local environments at the surface.

Orientation Angle of Molecules at Hexadecane-Water Interface Studied with Total Internal Reflection Second Harmonic Generation

The orientation angle is an important parameter that reflects the structure of molecules at interfaces. In order to obtain this parameter, second order nonlinear spectroscopic techniques including second harmonic generation (SHG) and sum frequency generation-vibrational spectroscopy (SFG-VS) have been successfully applied through analysis of the nonlinear signal from various polarizations. In some SHG and SFG-VS experiments, total internal reflection (TIR) configuration has been adopted to get enhanced signals. However, the reports on the detailed procedure of the polarization analysis and the calculation of the orientation angle of interfacial molecules under TIR configuration are still very few. In this paper, we measured the orientation angles of two molecules at the hexadecane-water interface under TIR and Non-TIR experimental configurations. The results measured from polarization analysis in TIR configuration consist with those obtained from Non-TIR configuration. This work demonstrates the feasibility and accuracy of polarization analysis in the determination of the orientation angle of molecules at the interfaces under TIR-SHG configuration.

Quadrature Demodulation of a Quantum Dot Optical Response to Faint Light Fields.

The amplitude and phase of a material's nonlinear optical response provide insight into the underlying electronic dynamics that determine its optical properties. Phase-sensitive nonlinear spectroscopy techniques are widely implemented to explore these dynamics through demodulation of the complex optical signal field into its quadrature components; however, complete reconstruction of the optical response requires measuring both the amplitude and phase of each quadrature, which is often lost in standard detection methods. Here, we implement a heterodyne-detection scheme to fully reconstruct the amplitude and phase response of spectral hole-burning from InAs/GaAs charged quantum dots. We observe an ultra-narrow absorption profile and a corresponding dispersive lineshape of the phase, which reflect the nanosecond optical coherence time of the charged exciton transition. Simultaneously, the measurements are sensitive to electron spin relaxation dynamics on a millisecond timescale, as this manifests as a magnetic-field dependent delay of the amplitude and phase modulation. Appreciable amplitude modulation depth and nonlinear phase shift up to ~0.09×π radians (16°) are demonstrated, providing new possibilities for quadrature modulation at faint photon levels with several independent control parameters, including photon number, modulation frequency, detuning, and externally applied fields.