Non-porous Substrates Research Articles

Mimicking Dynamic Adhesiveness and Strain-Stiffening Behavior of Biological Tissues in Tough and Self-Healable Cellulose Nanocomposite Hydrogels.

Although self-healing gels with structural resemblance to biological tissues attract great attention in biomedical fields, it remains a dilemma for combination between fast self-healing properties and high mechanical toughness. On the basis of the design of dynamic reversible cross-links, we incorporate rigid tannic acid-coated cellulose nanocrystal (TA@CNC) motifs into the poly(vinyl alcohol) (PVA)-borax dynamic networks for the fabrication of a high toughness and rapidly self-healing nanocomposite (NC) hydrogel, together with dynamically adhesive and strain-stiffening properties that are particularly indispensable for practical applications in soft tissue substitutes. The results demonstrate that the obtained NC gels present a highly interconnected network, where flexible PVA chains wrap onto the rigid TA@CNC motifs and form the dynamic TA@CNC-PVA clusters associated by hydrogen bonds, affording the critical mechanical toughness. The synergetic interactions between borate-diol bonds and hydrogen bonds impart a typical self-healing behavior into the NC gels, allowing the dynamic cross-linked networks to undergo fast rearrangement in the time scale of seconds. Moreover, the obtained NC hydrogels not only mimic the main feature of biological tissues with the unique strain-stiffening behavior but also display unique dynamic adhesiveness to nonporous and porous substrates. It is expected that this versatile approach opens up a new prospect for the rational design of multifunctional cellulosic hydrogels with remarkable performance to expand their applications.

Single metal deposition versus physical developer: A comparison between two advanced fingermark detection techniques

Single metal deposition (SMD II) is a fingermark detection technique based on the use of colloidal gold. The technique has been simplified and optimised over the years to become more reliable, sensitive and user-friendly. Physical developer (PD) is a well-established detection method based on silver deposition from a redox solution. This study presents an extensive comparison of SMD II against PD for fingermark detection on porous substrates. The two techniques were compared as (i) standalone methods, (ii) in sequence after the application of routine amino acids reagents (1,2-indanedione/zinc followed by ninhydrin), and (iii) after the substrates have been wet. More than 1000 fingermark specimens were processed.Overall, the performance of SMD II was judged to be inferior to that of PD; therefore, SMD II cannot be recommended as a valid replacement for fingermark detection on porous substrates. Indanedione/zinc and ninhydrin application negatively impacts on SMD II performance and the technique gave inconsistent results across the selected range of porous substrates. Moreover, the detected fingermarks lacked contrast making their visualisation difficult. However, even if PD remains the technique of choice, SMD II showed significant potential. It proved to be less affected by donor variability and it can be applied on both porous and non-porous substrates. It did not lead to uncontrolled background staining that commonly occurs with PD. If contrast and consistency issues can be addressed in future research, SMD II may become a viable alternative to PD.

The effect of mark enhancement techniques on the presumptive and confirmatory tests for blood

An investigation into the effects of physical and chemical enhancement on subsequent presumptive and confirmatory tests for human blood is presented. Human blood was deposited onto porous (white 80 gsm paper and brown envelope) and non-porous (tile and linoleum) substrates in a depletion series (30 depletions on non-porous and 20 on porous) and subjected to three ageing periods; 1, 7 and 28 days. A number of enhancement techniques were tested [fluorescence, black magnetic powder (BMP), iron-oxide black powder suspension (PS), cyanoacrylate (CA) fuming, acid violet 17 (AV17), acid yellow 7 (AY7), ninhydrin, DFO and Bluestar Forensic Magnum (BFM) luminol] to evaluate their potential effects on subsequent presumptive and confirmatory tests. AV17 and Bluestar provided the best enhancement and fully enhanced all depletions in the series. The sensitivity of the Kastle-Meyer (KM) (presumptive), Takayama and RSID-Blood tests (confirmatory) was initially investigated to determine the range of detectable depletions. The KM test detected all depletions, whereas the Takayama test detected up to depletion 6 and RSID-Blood detected up to depletion 20 (paper), 10 (envelope), 15 (tile) and 9 (lino). The abilities of these tests to detect blood after enhancement were then observed.A number of techniques resulted in little to no effect on any of the blood tests, whereas adverse effects were observed for others. Ninhydrin and CA fuming caused weak but instantaneous positive KM results whereas methanol-based AV17 and AY7 delayed the reaction by as much as 1 min. The Takayama test was not very sensitive, therefore, its performance was easily affected by enhancement and negative results were often observed. RSID-Blood tests were largely unaffected by chemical enhancement although a drop in positive results was observed for some of the techniques when compared to positive controls.Using a standard procedure for DNA extraction, all the tested blood samples (before and after enhancement) gave a detectable quantity of DNA and were successfully profiled. Out of the 45 samples processed for DNA profiling, 41 gave full profiles, while the remaining showed allele drop out in one or two loci.

Modeling and experimental demonstration of high-throughput flow-through spatial atomic layer deposition of Al2O3 coatings on textiles at atmospheric pressure

Atomic layer deposition (ALD) shows promise for forming thin films on temperature-sensitive materials, such as polymers, for applications in filtration, sensing, etc. However, traditional batch ALD generally proceeds slowly and requires controlled, low-pressure equipment. One approach to combat this limitation is spatial ALD, which uses moving substrates through zones of reactant exposure. To date, studies of spatial ALD have primarily explored growth on planar and nonporous substrates. Here, the authors demonstrate a proof-of-concept atmospheric pressure flow-through spatial ALD reactor specifically designed for through-porous substrates, such as fiber webs. This paper describes detailed gas flow modeling and experimental analysis of their prototype reactor. Model results identify precursor gas flow rates, channel spacing, and the distance between the substrate and reactor surfaces as key factors to achieve uniform deposition. Using a previously developed surface wetting protocol, the authors experimentally verify operating conditions for uniform ALD alumina on polypropylene as a model fiber substrate. Under good ALD conditions, the spatial ALD reactor can complete ∼60 cycles/min over a large substrate area, which is 60 times faster than batch ALD. The authors quantify growth saturation conditions and find that under reduced gas flow rates or slow fiber translation speeds, a transition from ALD to chemical vapor deposition-like growth can be induced. Additionally, the authors demonstrate that fiber mat properties such as mat density and air permeability play important roles in the penetration depth of the precursors and, therefore, the conditions needed to achieve ALD. Overall, this work demonstrates a proof-of-concept reactor for high throughput ALD on porous substrates, and identifies important design challenges and considerations for future high-throughput ALD.

Cucurbit[n]uril Supramolecular Hydrogel Networks as Tough and Healable Adhesives

AbstractSupramolecular noncovalent interactions are widely found in natural adhesion phenomena to control macroscopic adhesion and accomplish a variety of complex functions. Such supramolecular adhesives could impart the interfaces with intriguing properties, e.g., energy dissipation and self‐healing, on account of their dynamic nature. Here, we demonstrate that cucurbit[8]uril (CB[8])‐based supramolecular hydrogel networks can function as dynamic adhesives for diverse nonporous (e.g., glass, stainless steel, aluminum, copper, and titanium) and porous substrates (wood and bone). Without any surface prefunctionalization or introduction of curing agents, these CB[8] hydrogel networks can be readily applied by curing around the softening temperature, forming a tough and healable adhesive interlayer. The ability to fabricate a robust sandwich model consisting of substrate–CB[8] hydrogel network–substrate enables a number of applications including stretchable and wearable electronics, hybrid systems for biomedical devices or tissue/bone regeneration.

Development of Latent Fingermarks on Nonporous and Semiporous Substrates Using Photoluminescent Eu(Phen)2 Complex Intercalated Clay Hybrids with Enhanced Adhesion.

In forensic science, developing latent fingermarks using powders is a critical, general method to identify individuals. Photoluminescent Eu(Phen)2 complex intercalated clay hybrids have been used to improve the visualization of fingermarks on nonporous (glass and polymer film) and semiporous (euro and dollar banknotes) substrates. An ion exchange reaction has been successfully used to intercalate Eu(Phen)2 complex ions into the interlayer spacing of two different Na+ -clays, Na+ -montmorillonite and Na+ -hectorite, with different primary particle sizes. To change the surface properties of the obtained hybrid to be more lipophilic, the hydroxyl groups at the edge of the hectorite hybrid were modified with hexadecyltrimethoxysilane via silylation. We investigated the correlation of the size and surface properties of the hybrids with their adhesion to fingermark residues. Fingermarks were successfully visualized using hybrids under UV illumination. In particular, ridge details on semiporous substrates can be more clearly seen using hybrids with smaller primary particles and greater lipophilicity.

One millimeter per minute growth rates for single wall carbon nanotube forests enabled by porous metal substrates.

We report an exceptionally high-efficiency synthesis of long single-wall carbon nanotube (SWCNT) forests using porous substrates (metal meshes) in place of nonporous flat substrates. This study examined the dependence of the growth efficiency on various mesh structures, including wire diameter, aperture size, and total surface area. We demonstrated that the synthesis of SWCNT forests is highly dependent on the initial porosity as well as maintaining the open pores throughout the duration of the growth. Our results show that carbon nanotubes (CNTs) can be grown on all surfaces of the mesh in high efficiency with the optimum growth efficiency observed for a mesh porosity of ∼30%. Based on these results, we demonstrated the high efficiency synthesis of SWCNT forests (height: >3.47 mm, average growth rate: 301 μm min−1, and yield: 12.7 mg cm−2 in 10 min growth time). Furthermore, we showed that the initial growth rates exceeded 1 millimeter per minute (1000 μm min−1). Our results further indicate that metal meshes represent a viable alternative to nonporous flat substrates for the efficient synthesis of tall and high yielding SWCNTs.

Chemistry of extracting high-contrast invisible fingerprints from transparent and colored substrates using a novel phosphorescent label

Conventional fluorescent powders for developing latent fingerprints show characteristics of complicated operation, auto-fluorescence interference and high toxicity. To overcome these issues, we report a facile methodology to extract high contrast fingerprints on non-porous and porous substrates using a phosphorescent label.

An AIPE-active heteroleptic Ir(III) complex for latent fingermarks detection

The existence of a sensitive, accurate and convenient method to visualize latent fingermarks (LFs) is of great importance for police identification. In this work, a novel heteroleptic cationic Ir(III) complex (DX-5), which exhibits dual emission (λmax = 362 nm, Ф = 0.16 and λmax = 494 nm, Ф = 0.59) and aggregation-induced phosphorescent emission (AIPE) characteristics, was designed and synthesized. This complex was used to enhance the visualization of LFs on different surfaces of porous and non-porous substrates. The results illustrate that complex DX-5 can define the details of LFs up to the third level within 5 min, proving to be a candidate material for criminal investigations applications.

Interfacial Separation-Enabled All-Dry Approach for Simultaneous Visualization, Transfer, and Enhanced Raman Analysis of Latent Fingerprints

It is of essential importance to visualize latent fingerprint (LFP) and analyze the compounds therein. For this purpose, various approaches have been developed but suffer from low imaging and/or detection efficiency. Most importantly, most of them require a necessary in-solution process and thus are not applicable to LFPs on bulky or water-sensitive substrates. In this work, we report an all-dry method to achieve simultaneous visualization and transfer of LFP and enhanced Raman analysis of multiple species therein. In this innovative approach, polydopamine (PDA) film-coated poly(dimethylsiloxane) (PDMS) flake with dense plasmonic silver nanoparticles (AgNPs@PDA@PDMS) was applied to cover the substrate carrying LFP. After gentle separation, the AgNPs@PDA film was transferred from PDMS to the LFP ridges to visualize a positive LFP pattern on the substrate, leaving behind a complementary (negative) LFP pattern on the PDMS flake. The compounds in the LFP were further analyzed via the AgNP-enhanced Raman technique. This approach enables high-contrast and full-feature visualization and transfer of LFP on arbitrary nonporous substrates and facilitates sensitive Raman analysis of multiple species in the sweat and thus promises great potential for practical applications.

Super Bulk and Interfacial Toughness of Physically Crosslinked Double‐Network Hydrogels

AbstractConventional design wisdom prevents both bulk and interfacial toughness to be presented in the same hydrogel, because the bulk properties of hydrogels are usually different from the interfacial properties of the same hydrogels on solid surfaces. Here, a fully‐physically‐linked agar (the first network)/poly(N‐hydroxyethyl acrylamide) (pHEAA, the second network), where both networks are physically crosslinked via hydrogen bonds, is designed and synthesized. Bulk agar/pHEAA hydrogels exhibit high mechanical properties (2.6 MPa tensile stress, 8.0 tensile strain, 8000 J m−2 tearing energy, 1.62 MJ m−3 energy dissipation), high self‐recovery without any external stimuli (62%/30% toughness/stiffness recovery), and self‐healing property. More impressively, without any surface modification, agar/pHEAA hydrogels can be easily and physically anchored onto different nonporous solid substrates of glass, titanium, aluminum, and ceramics to produce superadhesive hydrogel–solid interfaces (i.e., high interfacial toughness of 2000–7000 J m−2). Comparison of as‐prepared and swollen gels in water and hydrogen‐bond‐breaking solvents reveals that strong bulk toughness provides a structural basis for strong interfacial toughness, and both high toughness mainly stem from cooperative hydrogen bonds between and within two networks and between two networks and solid substrates. This work demonstrates a new gel system to achieve superhigh bulk and interfacial toughness on nonporous solid surfaces.

Optical and structural characterisation of epitaxial nanoporous GaN grown by CVD

In this paper we study the optical properties of nanoporous gallium nitride (GaN) epitaxial layers grown by chemical vapour deposition on non-porous GaN substrates, using photoluminescence, cathodoluminescence, and resonant Raman scattering, and correlate them with the structural characteristic of these films. We pay special attention to the analysis of the residual strain of the layers and the influence of the porosity in the light extraction. The nanoporous GaN epitaxial layers are under tensile strain, although the strain is progressively reduced as the deposition time and the thickness of the porous layer increases, becoming nearly strain free for a thickness of 1.7 μm. The analysis of the experimental data point to the existence of vacancy complexes as the main source of the tensile strain.

The formation of a functional retinal pigment epithelium occurs on porous polytetrafluoroethylene substrates independently of the surface chemistry

Subretinal transplantation of functioning retinal pigment epithelial (RPE) cells may have the potential to preserve or restore vision in patients affected by blinding diseases such as age-related macular degeneration (AMD). One of the critical steps in achieving this is the ability to grow a functioning retinal pigment epithelium, which may need a substrate on which to grow and to aid transplantation. Tailoring the physical and chemical properties of the substrate should help the engineered tissue to function in the long term. The purpose of the study was to determine whether a functioning monolayer of RPE cells could be produced on expanded polytetrafluoroethylene substrates modified by either an ammonia plasma treatment or an n-Heptylamine coating, and whether the difference in surface chemistries altered the extracellular matrix the cells produced. Primary human RPE cells were able to form a functional, cobblestone monolayer on both substrates, but the formation of an extracellular matrix to exhibit a network structure took months, whereas on non-porous substrates with the same surface chemistry, a similar appearance was observed after a few weeks. This study suggests that the surface chemistry of these materials may not be the most critical factor in the development of growth of a functional monolayer of RPE cells as long as the cells can attach and proliferate on the surface. This has important implications in the design of strategies to optimise the clinical outcomes of subretinal transplant procedures.Graphical

The adaptation of a 360° camera utilising an alternate light source (ALS) for the detection of biological fluids at crime scenes

One of the most important and commonly encountered evidence types that can be recovered at crime scenes are biological fluids. Due to the ephemeral nature of biological fluids and the valuable DNA that they can contain, it is fundamental that these are documented extensively and recovered rapidly. Locating and identifying biological fluids can prove a challenging task but can aid in reconstructing a sequence of events. Alternate light sources (ALS) offer powerful non-invasive methods for locating and enhancing biological fluids utilising different wavelengths of light. Current methods for locating biological fluids using ALS's may be time consuming, as they often require close range searching of potentially large crime scenes. Subsequent documentation using digital cameras and alternate light sources can increase the investigation time and due to the cameras low dynamic range, photographs can appear under or over exposed. This study presents a technique, which allows the simultaneous detection and visualisation of semen and saliva utilising a SceneCam 360° camera (Spheron VR AG), which was adapted to integrate a blue Crime Lite XL (Foster+Freeman). This technique was investigated using different volumes of semen and saliva, on porous and non-porous substrates, and the ability to detect these at incremental distances from the substrate. Substrate type and colour had a significant effect on the detection of the biological fluid, with limited fluid detection on darker substrates. The unique real-time High Dynamic range (HDR) ability of the SceneCam significantly enhanced the detection of biological fluids where background fluorescence masked target fluorescence. These preliminary results are presented as a proof of concept for combining 360° photography using HDR and an ALS for the detection of biological stains, within a scene, in real time, whilst conveying spatial relationships of staining to other evidence. This technique presents the opportunity to presumptively screen a crime scene for biological fluids and will facilitate simultaneous location and visualisation of biological evidence.

Electrochemical impedance spectroscopy: A deeper and quantitative insight into the fingermarks physical modifications over time

The present work is focused on a novel approach for the study and quantification of some of the physical changes to which a fingermark deposited on non-porous substrates is subjected as its ageing proceeds. Particularly, electrochemical impedance spectroscopy (EIS) technique has been applied for the first time in order to monitor the electrochemical behaviour of the system constituted by the fingermark residue and the underlying substrate. The impedance spectra proved to be significantly affected by the presence of the mark residue as well as by its ageing process. Opportune fitting operations performed on the experimental data allowed obtaining quantitative electrochemical parameters used to reach useful information on the fingermarks ageing mechanism as well as to calculate the fingermark ageing curves from which fundamental information could be potentially extrapolated.

Comparison of preprocessing methods and storage times for touch DNA samples.

AimTo select appropriate preprocessing methods for different substrates by comparing the effects of four different preprocessing methods on touch DNA samples and to determine the effect of various storage times on the results of touch DNA sample analysis.MethodHand touch DNA samples were used to investigate the detection and inspection results of DNA on different substrates. Four preprocessing methods, including the direct cutting method, stubbing procedure, double swab technique, and vacuum cleaner method, were used in this study. DNA was extracted from mock samples with four different preprocessing methods. The best preprocess protocol determined from the study was further used to compare performance after various storage times. DNA extracted from all samples was quantified and amplified using standard procedures.ResultsThe amounts of DNA and the number of alleles detected on the porous substrates were greater than those on the non-porous substrates. The performances of the four preprocessing methods varied with different substrates. The direct cutting method displayed advantages for porous substrates, and the vacuum cleaner method was advantageous for non-porous substrates. No significant degradation trend was observed as the storage times increased.ConclusionDifferent substrates require the use of different preprocessing method in order to obtain the highest DNA amount and allele number from touch DNA samples. This study provides a theoretical basis for explorations of touch DNA samples and may be used as a reference when dealing with touch DNA samples in case work.

Rapid visualization of latent fingermarks using gold seed-mediated enhancement.

BackgroundFingermarks are one of the most important and useful forms of physical evidence in forensic investigations. However, latent fingermarks are not directly visible, but can be visualized due to the presence of other residues (such as inorganic salts, proteins, polypeptides, enzymes and human metabolites) which can be detected or recognized through various strategies. Convenient and rapid techniques are still needed to provide obvious contrast between the background and the fingermark ridges and to then visualize latent fingermark with a high degree of selectivity and sensitivity.ResultsIn this work, lysozyme-binding aptamer-conjugated Au nanoparticles (NPs) are used to recognize and target lysozyme in the fingermark ridges, and Au+-complex solution is used as a growth agent to reduce Au+ from Au+ to Au0 on the surface of the Au NPs. Distinct fingermark patterns were visualized on a range of professional forensic within 3 min; the resulting images could be observed by the naked eye without background interference. The entire processes from fingermark collection to visualization only entails two steps and can be completed in less than 10 min. The proposed method provides cost and time savings over current fingermark visualization methods.ConclusionsWe report a simple, inexpensive, and fast method for the rapid visualization of latent fingermarks on the non-porous substrates using Au seed-mediated enhancement. Au seed-mediated enhancement is used to achieve the rapid visualization of latent fingermarks on non-porous substrates by the naked eye without the use of expensive or sophisticated instruments. The proposed approach offers faster detection and visualization of latent fingermarks than existing methods. The proposed method is expected to increase detection efficiency for latent fingermarks and reduce time requirements and costs for forensic investigations.

A method for detecting the fluorescence-emission wavelength and visualization of biological traces

The contribution of biological trace detection has been fundamental in forensic cases. This paper describes a method for the rapid and non-destructive method for latent biological trace detection on the surface of the non-porous substrates by laser reflection. The absorption and emission of the biological trace from the spectrophotometer and fluorophotometer are analyzed. Visualization of latent biological traces is realized by femtosecond laser and its parametric amplification system. Applicability of the ultraviolet (UV) from femtosecond laser to latent blood fingerprints detection has rarely been reported, especially in the range of multi-wavelengths laser. Results demonstrated that the latent blood fingerprints can be visualized through UV imaging system instruments.

Mechanisms of chain adsorption on porous substrates and critical conditions of polymer chromatography

Polymer adsorption is a ubiquitous phenomenon with numerous technological and healthcare applications. The mechanisms of polymer adsorption on surfaces and in pores are complex owing to a competition between various entropic and enthalpic factors. Due to adsorption of monomers to the surface, the chain gains in enthalpy yet loses in entropy because of confining effects. This competition leads to the existence of critical conditions of adsorption when enthalpy gain and entropy loss are in balance. The critical conditions are controlled by the confining geometry and effective adsorption energy, which depends on the solvent composition and temperature. This phenomenon has important implications in polymer chromatography, since the retention at the critical point of adsorption (CPA) is chain length independent. However, the mechanisms of polymer adsorption in pores are poorly understood and there is an ongoing discussion in the theoretical literature about the very existence of CPA for polymer adsorption on porous substrates.In this work, we examine the mechanisms of chain adsorption on a model porous substrate using Monte Carlo (MC) simulations. We distinguish three adsorption mechanisms depending on the chain location: on external surface, completely confined in pores, and also partially confined in pores in so-called “flower” conformations. The free energies of different conformations of adsorbed chains are calculated by the incremental gauge cell MC method that allows one to determine the partition coefficient as a function of the adsorption potential, pore size, and chain length. We confirm the existence of the CPA for chain length independent separation on porous substrates, which is explained by the dominant contributions of the chain adsorption at the external surface, in particular in flower conformations. Moreover, we show that the critical conditions for porous and nonporous substrates are identical and depend only on the surface chemistry. The theoretical results are confirmed by comparison with experimental data on chromatographic separation of a series of linear polystyrenes.

Visualisation of latent fingermarks on polymer banknotes using copper vacuum metal deposition: A preliminary study

The UK's recent move to polymer banknotes has seen some of the currently used fingermark enhancement techniques for currency potentially become redundant, due to the surface characteristics of the polymer substrates. Possessing a non-porous surface with some semi-porous properties, alternate processes are required for polymer banknotes. This preliminary investigation explored the recovery of fingermarks from polymer notes via vacuum metal deposition using elemental copper. The study successfully demonstrated that fresh latent fingermarks, from an individual donor, could be clearly developed and imaged in the near infrared. By varying the deposition thickness of the copper, the contrast between the fingermark minutiae and the substrate could be readily optimised. Where the deposition thickness was thin enough to be visually indistinguishable, forensic gelatin lifters could be used to lift the fingermarks. These lifts could then be treated with rubeanic acid to produce a visually distinguishable mark. The technique has shown enough promise that it could be effectively utilised on other semi- and non-porous substrates.