Noncovalent Research Articles

Structure formation in high moisture extrudates produced from soy protein fractions varying in 7S/11S globulin ratio.

Soy proteins mainly comprise 7S and 11S globulins, which have distinct structural and physical properties. To investigate the impact of soy protein composition on structure formation during high moisture extrusion (HME), fractions enriched in 7S or 11S globulins were prepared and blended in different ratios for lab-scale HME processing. Extrudates prepared from the 11S globulin-enriched fraction were inhomogeneous, as opposed to all other extrudates. Differences in extrudate structure and texture by varying the raw material protein composition were limited. However, 11S globulin-enriched fraction based extrudate was mainly stabilized by disulfide bonds, while with increasing raw material 7S globulin content the importance of non-covalent interactions increased. Even after disrupting all (non-)covalent bonds, high MW aggregates were detected in all extrudates. Thus, the protein composition of soy protein ingredients clearly impacts the type of protein-protein interactions and bonds formed during HME processing. This may hold relevance for the occurrence of specific phenomena during HME, such as syneresis, or the digestibility of the obtained products, although this requires further investigation. Overall, the findings of this study have implications for the use of protein-rich ingredients, which may vary in protein composition as the result of biological variability or prior processing, in high moisture extrusion.

Extraction of mucilage polysaccharides from chia seed by hydrophobic deep eutectic solvents-based three-phase partitioning system: A phase behavior-driven approach

By incorporating the hydrophobic deep eutectic solvents (DESs) into the three-phase partitioning (TPP) technique, a TPP-based method was developed to extract the chia seed polysaccharide (CSP) from chia seed. Through a single-factor experiment and response-surface model, the optimal condition for the TPP extraction was determined as DES composed of dodecanoic acid and octanoic acid in a 1:1 M ratio, (NH4)2SO4 concentration of 32.86 %, crude extract–DES ratio of 0.93 (v/v), aqueous phase pH of 4.38, extraction temperature of 35 °C, and extraction time of 10 min. The polysaccharide yield of the constructed TPP method is 8.65 %, which is higher than the conventional water extraction method (yield is 6.96 %). Molecular dynamics simulations reveal the phase behavior of proteins and polysaccharides in the TPP system, showing that noncovalent interactions play a crucial role in the TPP system. The CSP obtained by the TPP method exhibits distinctive composition, structural, physicochemical, and functional properties, leading to improved thermal stability, rheological behavior, and antioxidant performance. Compared with the traditional extraction method, efficient extraction of CSP can be achieved flexibly using the proposed TPP approach, resulting in high yield and quality of CSP, which provides a new path for the large-scale utilization of chia seed.

Inhibition of LPS-induced inflammatory response in RAW264.7 cells by natural Chlorogenic acid isomers involved with AKR1B1 inhibition

Inflammation is the physiological response of the immune system to injury or infection, typically manifested by local tissue congestion, swelling, heat, and pain. Prolonged or excessive inflammation can lead to tissue damage and the development of many diseases. The anti-inflammatory effects of natural ingredients have been extensively researched and confirmed. This study investigated the effects of Chlorogenic acid (CGA) isomers —— 3-Caffeolyquninic acid (3-CQA), 4-Caffeolyquninic acid (4-CQA), and 5-Caffeolyquninic acid (5-CQA) —— on the inflammatory response and oxidative stress reaction induced by LPS in RAW264.7 cells. Overall, 3-CQA exhibited the most significant reduction in levels of TNF-α, IL-6, NO, and ROS. 4-CQA showed superior inhibition of TNF-α compared to 5-CQA (p < 0.05), while no significant difference in other parameters. We further used DARTS and CETSA to demonstrate that CGA isomers have stable affinity with AKR1B1. As a positive control, the AKR1B1 antagonist epalrestat exhibited similar effects to the CGA isomers. 3-CQA having the smallest half-inhibitory concentration (IC50) for AKR1B1, while 4-CQA and 5-CQA have similar values. AutoDock simulations of the docking conformations revealed minimal differences in the average binding energies of the CGA isomers. The main differences were that VAL47 formed a hydrogen bond with 3-CQA, whereas GLN49 formed hydrogen bonds with 4-CQA and 5-CQA. Additionally, the number of hydrophobic bonds involving PHE122 and LEU300 varies. Our conclusion is that differences in non-covalent interactions result in the varying inhibitory abilities of CGA isomers on AKR1B1, which further affect the anti-inflammatory and antioxidant effects of CGA isomers.

Chiral Induction of a Tetrakis(porphyrin) in Various Chiral Solvents.

Non-covalent interactions offer an alternative way for developing stimulus-responsive materials such as sensors, machines, and drug-delivery systems. We recently reported that a urethane-equipped tetrakis(porphyrin) forms one-handed helical supramolecular polymers in solution in response to chirality of chiral solvents. Conformational changes in helical sense were detected using circular dichroism (CD) spectroscopy, which showed that the tetrakis(porphyrin) can possibly be used as a sensor for determining the enantiomeric excess of a chiral analyte. Hence, we studied the scope and limitations of the chiral-induction behavior of tetrakis(porphyrin) to deepen the understanding of tetrakis(porphyrin)-based chiral sensing systems. Herein, we report the chiral-induction behavior of tetrakis(porphyrin) in various chiral solvents, which was found to be CD-active in many chiral solvents. Notably, the tetrakis(porphyrin) was CD active in a cryptochiral molecular solvent, which is exciting because the chiralities of acyclic saturated hydrocarbons are hard to sense. Consequently, this study highlights the potential advantages of supramolecular chiral sensors capable of targeting a wide range of analytes, including molecules that are absorption-silent in the UV/vis region, ones devoid of anchoring functional groups, and acyclic, saturated hydrocarbons.

Investigating the non-covalent interactions between rutin and superoxide dismutase: Focus on thermal stability, structure, and in vitro digestion

Rutin is prone to degradation during processing, highlighting the need for a suitable protein system for its delivery. This study evaluated the effects of pH and concentration ratios on the interaction between rutin and superoxide dismutase (SOD), aiming to develop a suitable non-covalent delivery system. The highest thermal stability was observed at pH 4 with a rutin-to-SOD concentration ratio of 5:1, where the melting temperature (Tm) reached 67.8 °C, and the half-life was 176 min. Infrared spectroscopy and particle size analysis revealed that rutin has minimal impact on the secondary structure of SOD; however, high concentrations of rutin influence the quaternary structure of SOD, leading to aggregation. Molecular docking and molecular dynamics simulations further confirmed that the interaction between rutin and SOD occurs through hydrogen bonding and hydrophobic interactions, with pH altering their binding sites. At pH 5 and pH 6, the digestive stability of the SOD-rutin complex was the highest. This study provides a theoretical basis for the preparation of highly stable SOD-rutin complexes and identifies a new protein system for the stabilization of rutin.

Strong self-healing close-loop recyclable vitrimers via complementary dynamic covalent/non-covalent bonding

Epoxy vitrimers represent a new class of high-performance sustainable resins because of their desired mechanical and thermally malleable properties. Unfortunately, existing epoxy vitrimers cannot self-heal at room temperature (R.T.) due to the trade-off between mechanical robustness, recyclability, and the ‘frozen’ state of vitrimer networks at R.T. Herein, a high-performance hyperbranched epoxy vitrimer (DCNC/50PEDA) via curing bis(2,3-epoxypropyl) cyclohex-4-ene-1,2-dicarboxylate (DCNC) with 50 wt% of a phosphorus/silicon-containing polyethyleneimine (PEDA) at R.T., and the key to this design lies in rationally integrating complementary dynamic non-covalent hydrogen-bonding and π-π stacking and covalent β-hydroxy ester bonds into the high-mobility branched units of the DCNC/50PEDA network. This design endows the vitrimer with a room-temperature self-healing efficiency up to 96.0 %, high mechanical strength reaching 36.0 MPa, and desired closed-loop recyclability. Moreover, its strong adhesion to a variety of substrates and exceptional fire retardancy, e.g., a limiting oxygen index of 39.0 % and a desired UL-94 V-0 rating, make it an outstanding fire-retardant coating for flammable substrates, such as wood. Such a performance portfolio enables DCNC/50PEDA to outperform existing self-healing polymer and vitrimers counterparts. This work establishes a promising complementary dynamic design protocol for creating self-healing, strong, recyclable, and fire-safe polymers by integrating dynamic non-covalent interactions and covalent bonds, which hold great real-world applications in industries, such as bulk materials, coatings, and adhesives.

In Silico Drug Encapsulation Using 2-Hydroxypropyl-β-CD, Tyrosine Kinase and Tyrosinase Inhibition of Dinuclear Cu(II) Carboxylate Complexes

In recent years, copper carboxylate complexes have garnered significant interest for biological applications. This study focuses on 20 Cu(II) carboxylate complexes selected from our previous research. Due to the hydrophobic nature of these complexes, the 2-hydroxypropyl-β-cyclodextrin (2HPβCD) was employed as a carrier to reduce toxicity and increase solubility for controlling drug delivery. Monte Carlo calculations were performed to confirm the interaction between the optimized structures of Cu(II) complexes and 2HPβCD, forming a host-guest system. All the structures were simulated and optimized using DFT-D calculations in Material Studio 2017. The results indicated that a neutral medium is more favorable for the adsorption of these complexes into 2HPβCD. More negative binding energy values suggested strong and energetically favorable adsorption on 2HPβCD. Complexes 4, 5, and 7 exhibited the highest interaction, making them excellent candidates for drug delivery systems. DFT-D calculations were also used to investigate the release of complexes, revealing that complexes 5, 14, and 19 were difficult to release due to their lowest energy. In contrast, complexes 8, 9, and 16 were found to be most efficient to release due to weak non-covalent interactions with 2HPβCD as we can predict from binding energy obtained by DFT-D. No specific trend was observed in the interaction of the complexes with 2HPβCD. Additionally, the effects of these complexes on c-kit tyrosine kinase and Mushroom tyrosinase were studied by molecular docking. The results demonstrated that all the complexes interacted with the active site of respective receptors through hydrophobic interactions. Complexes containing 1,10-phenanthroline and 2,2-bipyrdine were identified as having a strong, spontaneous binding ability with receptors.

Structural characterization of noni (Morinda citrifolia L.) pectin and its inhibitory activity on pancreatic lipase

This study aimed to investigate the physicochemical properties and biological activities of noni pectin (NP) extracted using various solvents, three fractions of noni pectin were obtained using traditional chemical and deep eutectic solvents. NPs are composed of various ratios of galacturonic acid, arabinose, rhamnose, xylose, glucose, and galactose with different yields, molecular weights, esterification degrees (DE), and microstructures. Among the fractions, noni pectin extracted with Betaine-citric acid (BNP) exhibited higher molecular weight, degree for esterification and pancreatic lipase (PL) inhibitory activity than the other fractions. Enzyme kinetic analysis indicated that BNP inhibited PL via a noncompetitive mechanism. BNP significantly altered the secondary structure of PL and quenched PL fluorescence, suggesting a static quenching mechanism. Isothermal titration calorimetry (ITC) further demonstrated that the binding of BNP to PL was spontaneous and driven by enthalpy, primarily mediated by hydrogen bonding and van der Waals forces. Molecular docking simulations also confirmed strong noncovalent interactions (hydrogen bonding and van der Waals forces) between BNP and PL. This study validated the high efficiency of the deep eutectic solvent-extracted noni pectin fraction in pancreatic lipase inhibition.

Coamorphous systems of rebamipide: Selection of amino acid coformers based on protein-ligand docking, in vitro assessment and study of interactions by computational and multivariate analysis.

Three coamorphous systems of Rebamipide (REB) with the amino acids namely, Tryptophan (TRP), Phenylalanine (PHE) and Arginine (ARG) are reported. A unique approach for the virtual screening of amino acid coformers is presented by employing molecular docking studies based on interactions of the drug molecule with various amino acid fragments in the drug-receptor cocrystal structure. Successful formation of stable coamorphous systems with ARG, TRP and PHE served as the proof-of-concept along with negative benchmarking standards Histidine and Aspartic acid, wherein coamorphous systems could not be obtained despite multiple trials which resulted in crystalline physical mixtures. The coamorphous systems were characterized by a halo pattern in Powder XRD and a single glass transition temperature (Tg) in modulated DSC. Physical stability assessments of the coamorphous systems showed direct correlation of Tg with the observed stability of the amorphous phase which was found in the order ARGREB > TRPREB ≥ PHEREB. To determine the specific functional groups engaged in the interactions, multivariate analysis was performed on the FTIR spectra. These interactions were further validated by DFT and QTAIM analysis, which revealed key noncovalent interactions in the three coamorphous systems. All three coamorphous systems showed excellent release profiles of the API as demonstrated by the f2 and DE parameters in the order ARGREB ≥ TRPREB > PHEREB ≥ amorphous drug, far exceeding that of the crystalline drug. The interplay of multivariate analysis and QTAIM can be useful in estimating the interactions within the coamorphous systems which can further contribute to stability and physicochemical properties of the systems.

Multicomponent crystals: Solubility enhancement of simvastatin using arginine and glycine coformers

Context: Simvastatin can be modified by the formation of multicomponent crystals to increase its solubility. Aims: To compare the solubility of multicomponent simvastatin crystals to pure simvastatin. Methods: The in silico study of simvastatin and the coformers arginine and glycine revealed non-covalent interactions, so multicomponent preparations of simvastatin crystals were prepared by solvent evaporation using a mole ratio of 1:1; 1:2 and 2:1. Results: Each simvastatin-arginine and simvastatin-glycine ratio increased the solubility, with the highest increase observed for the 1:2 ratio compared to pure simvastatin. Conclusions: Simvastatin-arginine multicomponent crystals (1:2) showed the best dissolution profile in phosphate buffer medium pH 7.0 with 67.69% dissolution, while simvastatin-glycine multicomponent crystals (1:2) exhibited the best dissolution profile in buffer media pH 1.2 with 16.19% dissolution. Characterization of the multicomponent crystals revealed a shift in the peaks, a decreased melting point, and enthalpy, indicating decreased % crystallinity and the formation of a new solid phase.

Tunable macroscopic self-healing of supramolecular gel through host–guest inclusion

Supramolecular gels (SGs) consisted of noncovalent cross-linking network structures are fascinating due to their efficient energy dissipation and reversible self-healing properties. However, it is unknown how the noncovalent interactions alter the macroscopic self-healing and mechanical properties of SGs. Herein, the peculiar nature of SGs manufactured by combining covalent and noncovalent (host–guest inclusion of β-cyclodextrin and C16 hydrophobic chain) cross-linking structures was studied and compared with covalent cross-linking preformed particle gels. The macroscopic self-healing behaviors, rheology, mechanical tensile properties, as well as the tunable mechanisms of self-healing were explored by visual inspection, rheological, and atomic force microscopy probing methods. The results show that the SGs exhibit excellent self-healing efficiency and mechanical strength after interfacial cutting. Moreover, the SGs exhibited excellent mechanical tensile properties, including loading–unloading, successive loading–unloading, and recovery loading–unloading tensile performances. Notably, the macroscopic self-healing of SGs has good tunability by changing the covalent and noncovalent crosslinker contents and salt contents. This peculiar phenomenon is attributed to certain host–guest inclusion forces (4.7 and 0.3 nN) between different SGs under the distilled and high-salinity water conditions, respectively. This study is beneficial for the development of stimuli–response supramolecular gels in different applications, such as oil recovery in fractured reservoirs.

Structural analysis and theoretical studies of 2-(2-chlorobenzylidene) malononitrile (CS) “a riot controlling agent”

In solvent methanol, malononitrile and 2-chlorobenzaldehyde were stirred in the presence of base piperidine to synthesise the target chemical 2-(2-chlorobenzylidene) malononitrile (CS). The crystal structure of the target compound C10H5ClN2 has been elucidated through X-ray crystallographic analysis. It crystallises in the monoclinic crystal system within the P21 space group, containing four molecules per asymmetric unit. The unit cell dimensions are a = 3.8825(3) Å, b = 21.0202(18) Å, c = 21.3481(18) Å, and β = 95.096(4)°. The phenyl and malononitrile groups, which make up the molecular components, are each planar but slanted towards one another at a dihedral angle of 12.7° (4). Besides this, target molecule is also stabilized by hydrogen bonding, halogen bonding and π stacking interactions. Solid-state structure has been analysed through Hirshfeld surface analysis, including the evaluation of the different energy frameworks, indicating that the molecular sheets are primarily formed by hydrogen bonds and halogen bonds and the stabilization is dominated via the electrostatic energy contribution. Fingerprint plots were carried out to study the relative contribution of noncovalent interactions in the target compound CS. Further, the density functional theory calculations were employed using B3LYP hybrid functional with 6-311++G level basic set to optimize the structural coordinates in gas phase and in different solvents (chloroform, water, and methanol). The chemically active regions of the target compound were identified by the analysis of molecular electrostatic potential surface. Further, from PASS analysis and literature reports, molecular docking of title compounds was carried out with human transient receptor potential ankyrin 1 ion channel (hTRPA1) (PDB-ID 6PQO). ΔGb (docking energy) and inhibition constant was calculated to be −7.53 kcal/mol and 3.33 μM respectively, with the target ion channel.

Elucidating the formation mechanism of gardenia blue pigment from amino acid and genipin

Gardenia blue (GB), a natural active blue pigment, can be synthesized from iridoid glycosides and primary amino-containing compounds in vivo and in vitro. However, limited studies have reported GB synthetic intermediates, leading to unawareness of the formation mechanism of GB. Here, we reported that GB could be detected in rats′ feces, whose formation was simulated by in vitro reaction of amino acid-rich feces extract from rats and genipin (GP) metabolized from geniposide (GE) through β-glucosidase. Firstly, we proved that 14 amino acids (AAs) detected in rats′ feces containing primary amino groups can react with GP to produce GB. Then, taking histidine (His) as example, we characterized the key intermediates during the reaction process, including basic units genihistidine A (GH-A) and dimers. As an active basic unit, GH-A underwent covalent polymerization to form dimer, which then self-assembled into supramolecular spherical nanoparticles through multiple noncovalent interactions, including hydrogen bonds, π-π interactions, and van der Waals interactions. Our study revealed the formation mechanism of GB and provided insights into the bioavailable form of GE from traditional Chinese medicine in vivo.

Synthesis and Characterization of Chitosan–Silver Nanocomposite Film: Antibacterial and Cytotoxicity Study

AbstractThis study is aimed at the in situ preparation and antibacterial study of silver nanoparticles within the matrix of an eco‐friendly, biocompatible, biodegradable, and bioavailable biopolymer (chitosan) to form Chi–AgNP film via multiple noncovalent interactions between the organic polymer and the nanoparticles. The film is fully characterized by infrared and ultraviolet spectroscopy, scanning electron microscopy, transmission electron microscopy, X‐ray photoelectron spectroscopy, and thermogravimetric analysis. The characterization confirms the successful incorporation of silver nanoparticles into the polymeric network. Infrared spectroscopy reveals peaks corresponding to the vibration of functional groups present in chitosan with enhanced intensity and blueshifts caused by the presence of silver nanoparticles. Well‐monodispersed spherical silver nanoparticles with an average size of 10 nm are observed in the Chi–AgNP film. The surface plasmon resonance at 447 nm is consistent with a typical silver plasmon. Furthermore, the antibacterial effects on E. coli and S. aureus were determined and attributed to the release of AgNPs observed by UV absorption.

Targeting pathogenic Acanthamoeba castellanii using DNA minor groove binding agents: Antiamoebic properties of DNA minor groove binders

DNA minor groove binders exhibit a high degree of sequence specificity and have a variety of biological actions including antiviral, anticancer, antibacterial, and anti-protozoal properties. Since it is the location of non-covalent interactions, the minor groove of double helical B-DNA is gaining significant interest as therapeutic targets. For the purpose of this investigation, the synthesis of five novel DNA minor groove binding agents was accomplished and antiparasitic efficacies were determined against Acanthamoeba castellanii of the T4 genotype in vitro. Using amoebicidal assays, the results revealed that all inhibitors tested showed significant killing of amoebae (P<0.05). Pre-treatment of amoebae with DNA minor groove binders inhibited parasite-mediated human cell death by measuring lactate dehydrogenase release using cytopathogenicity assays. Cytotoxicity assays revealed minimal effects on human cells. As phenotypic switching leads to infection recurrence, assays revealed that the inhibitors blocked amoebae transformation. These are promising findings and suggest that DNA minor groove binders may hold promise for further research in the effective eradication of pathogenic A. castellanii.

Probing Noncovalent Interaction Strengths of Host-Guest Complexes Using Negative Ion Photoelectron Spectroscopy.

Noncovalent interactions (NCIs) are crucial for the formation and stability of host-guest complexes, which have wide-ranging implications across various fields, including biology, chemistry, materials science, pharmaceuticals, and environmental science. However, since NCIs are relatively weak and sensitive to bulk perturbation, direct and accurate measurement of their absolute strength has always been a significant challenge. This concept article aims to demonstrate the gas-phase electrospray ionization (ESI)-negative ion photoelectron spectroscopy (NIPES) as a direct and precise technique to measure the absolute interaction strength, probe nature of NCIs, and reveal the electronic structural information for host-guest complexes. Our recent studies in investigating various host-guest complexes that involve various types of NCIs such as anion-π, (di)hydrogen bonding, charge-separated ionic interactions, are overviewed. Finally, a summary and outlook are provided for this field.

Positional isomers and non-covalent interactions of acrylonitrile-methylpyridinium iodide salts: Combined experimental and quantum chemical calculations investigations

Quaternary salts d-π-A+X- having a large π-conjugated system (I) 2-((Z)-1-cyano-2-[4-(dimethylaminophenyl]ethenyl)-1-methylpyridin-1-ium iodide, (II) 3-((Z)-1-cyano-2-[4-(dimethylaminophenyl]ethenyl)-1-methylpyridin-1-ium iodide, and (III) 4-((Z)-1-cyano-2 iodide -[4-(dimethylaminophenyl]ethenyl)-1-methylpyridin-1-ium iodide, were synthesized straightforwardly and easily and characterized by single-crystal X-ray diffraction, IR, UV–Vis, 1HNMR spectroscopy, DSC, and TGA. Quantum chemical calculations were performed to obtain electronic structure by using DFT. The salts I-III exhibited a hyperchromic shift and a strong bathochromic effect of 100 nm compared to the precursors, which indicates charge transfer (CT) due to ionic interactions. The Hirshfeld, MEPS, QTAIM, and NCI-RDG analyses showed that the -CN group and the counterion I(-) atom play major roles in the intermolecular interaction for crystal packing. The significance of non-covalent interactions for the stability of the molecules in their solid state is also revealed by natural bond orbital analysis.

Ab Initio Molecular Dynamics Studies of Stacked Adenine–Thymine and Guanine–Cytosine Nucleic Acid Base Pairs in Aqueous Solution

Ab initio MD studies have been performed on stacked adenine–thymine (A–T) and guanine–cytosine (G–C) nucleobase pairs solvated in water using Born–Oppenheimer molecular dynamics. These two systems have been analyzed using RDF, SDF, angle–distance CDF (combined distribution functions), plane projection analysis, hydrogen bond analysis, and non–covalent interaction (NCI) plots. The stacking property studies have shown that the molecular orientation of the A–T pair is completely opposite to that of the G–C pair though the center of mass distance between the two molecules is similar. The G–C pair shows significantly more stability in water than the A–T system does. RDF analyses show that the –NH– group and carbonyl groups show predominant interaction with water molecules. Water molecules are found to be most in numbers around the cytosine molecule and least around the adenine molecule. Hydrogen bonding studies show that the guanine molecule forms the highest number of hydrogen bonds with water molecules. On the other hand, the hydrogen atom attached to the –NH– group of adenine molecule shows the longest mean H–bond lifetime with water oxygen atoms. NCI interactions calculated through the ab initio method help us to visualize the [Formula: see text]-electron stacking and H–bonding between aromatic nucleobases and water molecules. A great shift in bond polarity and interaction intensity in different functional groups is observed for the nucleobases going from individually solvated molecules to paired states.

Dynamic covalent epoxy network of hyperbranched-synergistic-supramolecular: Catalyst-free reprocessing, and application in carbon fiber composites recycling

Plastic recycling, especially the recycling of thermosets, is a crucial step towards improving waste management and achieving economic recycling. Here, a method utilizing non-covalent supramolecular interactions and synergistic hyperbranched structures is reported to endow transesterification-based thermosetting materials with recyclability in the absence of a catalyst. A hyperbranched epoxy resin curing agent (HPCA) containing amide bonds, terminated by amine and ester, was designed and synthesized, and further cured with bisphenol A epoxy resin. The hyperbranched topological structure and its abundant amide bonds contribute to the formation of a dense hydrogen bonding network, enhancing the reprocessability, thermal, and mechanical properties of the material. As a result, the resin can be reprocessed by hot pressing at 190 °C and 10 MPa for 40 min without catalyst. Moreover, amide and ester bonds endow resin materials with excellent degradation performance in alkaline solutions, laying the foundation for the recycling and utilization of carbon fibers in composite materials.

Impacting Non-Covalent Interactions through Vibrational Strong Coupling.

Light-matter strong coupling, especially Vibrational Strong Coupling (VSC), has become a significant research focus due to its potential to alter materials' inherent physical and chemical properties. Remarkably, VSC operates even in the absence of light, harnessing subtle quantum fluctuations to influence material characteristics. Vibro-polaritonic states, which are half photonic and half material, are introduced in the molecular/material energy ladder under VSC conditions. Although the underlying mechanism remains elusive, it is proposed that these hybrid states may modify chemical reactivity and other properties by altering factors such as polarity, polarizability, and Van der Waals interactions. This evolving field, vibro-polaritonic chemistry, holds vast potential for deeper exploration, particularly within molecular sciences. This Review examines VSC's observed effects on non-bonding interactions, including hydrogen bonding and π-π interactions, typically governed by dispersive forces.