Mixture Of Nitrate Research Articles

Structure and Mobility of the Lipid System in Mixtures of Ethylammonium Nitrate and Water: Magnetic Resonance Measurements and Molecular Dynamics Simulations

Structure and Mobility of the Lipid System in Mixtures of Ethylammonium Nitrate and Water: Magnetic Resonance Measurements and Molecular Dynamics Simulations

AN ASSESSMENT OF PHASE CHANGE MATERIAL, PREPARATION TECHNIQUES AND CONTAINMENT MATERIAL WITH DIFFERENT MOLTEN SALTS FOR THERMAL ENERGY STORAGE SYSTEM

Molten salts are extensively used as high-temperature heat transfer media and thermal energy storage (TES) materials in concentrating solar power (CSP) plants. Molten salt corrosion is a critical factor influencing the safe operation of the system. This work comparatively summarizes various factors influencing molten salt corrosion, including temperature, impurities, alloy composition and gas atmosphere. Additionally, the corrosion mechanisms of nitrate, carbonate, chloride, and fluoride-based mixture salts are meticulously reviewed. The demand for high-temperature storage is indeed increasing, driven by the need for more efficient and sustainable energy solutions. High-temperature storage systems, particularly those utilizing phase change materials (PCMs) and molten salts, play a key role in enhancing energy efficiency and reducing carbon footprint. By improving the efficiency of energy storage and reducing the need for fossil fuels, high-temperature storage systems help decrease greenhouse gas emissions, contributing to the fight against global warming. The paper focused on enhancing the corrosion resistance of container materials in terms of improving PCM thermal conductivity and stability.

ამონიუმის ნიტრატის ბაზაზე წყალგამძლე ფეთქებადი ნარევის დამზადების შესაძლებლობის კვლევა

The creation of a safe technology for the production and use of industrial explosives is relevant both from a scientific and practical point of view. In order to meet these requirements, it is necessary to carry out studies for the correct and qualified selection of components of new explosives. The main purpose of the research was to test the explosive ability of the mixture of ammonium nitrate, gunpowder and paraffin.

Intermetallic TiFe particles generation within porous monolithic carbon materials arising from paper mill waste and their cooperative hydrogen storage properties

A new materials composed of TiFe particles stabilized onto a carbon support is described. The carbon support is derived from a waste from the paper industry called Kraft Black liquor. The particles are generated through an impregnation/reduction process of a mixture of titanium ethoxide and iron nitrate followed by a thermal treatment. The generated particles have been investigated through XPS, XRD and SEM analysis as well as tested for hydrogen storage. The hydrogen storage at 25 °C leads to a capacity of up to 0.5 wt% while at 150 °C, free of the carbon absorption, leads to a capacity of 0.2 wt% without any prior activation process.

Assessment of shielding efficiency of highly energetic electromagnetic radiation for lead-free cuprate-class material: Effect of MnFe2O4 ratios

In this work, efficient lead-free cuprate-based shielding materials mixed with different ratios (x = 0.1–2 wt%) of magnetic MnFe2O4 powder against nuclear radiation were proposed. The samples were prepared by using a mixture of raw materials of oxides for the preparation of the host cuprate Y1Ba2Cu3Oy materials and a mixture of nitrates in the presence of solvent for the formation of magnetic MnFe2O4 powder additive. The phase, crystalline structure, and composition were examined by X-ray diffraction. The main Y1Ba2Cu3Oy phase revealed good crystallinity and orthorhombic structure. As the ratio of magnetic MnFe2O4 powder additive increases, the orthorhombicity decreases. Gamma shielding performance was analyzed by using MNCP5 code. The analyses indicate that the addition of magnetic powder has an influence on the shielding performance of cuprate-class material. The radiation shielding performance of prepared materials is nearly the same with the low ratios of MnFe2O4 (i.e. x = 0.1 and 0.5 wt%). Yet, with further increasing the amount of MnFe2O4 beyond x = 0.5 wt%, a considerable detraction of shielding parameters was noticed, as estimated by the Monte Carlo simulation (MCNP-5 code). The linear attenuation coefficient of cuprate-class materials decreased by 19.6 %, 33.6 %, 19.3 %, and 19.7 %, respectively at 0.015 MeV, 0.1 MeV, 0.662 MeV, and 15 MeV when the MnFe2O4 concentration increased between 0.1 and 2 wt%.

Combustion Test for the Smallest Reciprocating Piston Internal Combustion Engine with HCCI on the Millimeter Scale

Micro reciprocating piston internal combustion engines are potentially desirable for high-energy density micro power sources. However, complex subsystem functions hinder the downsizing of reciprocating piston internal combustion engines. The homogeneous charge compression-ignition (HCCI) combustion mode requires no external ignition system; it contributes to structural simplification of the reciprocating piston internal combustion engines under a micro space constraint but has not been adequately verified at the millimeter scale. The study used a millimeter-scale HCCI reciprocating piston internal combustion engine fueled by a mixture of kerosene, ether, castor oil, and isopropyl nitrate for combustion investigation. The test engine with a displacement of 0.547 cc is the smallest reciprocating piston internal combustion engine known to have undergone in-cylinder combustion diagnosis. It is observed that the HCCI combustion mode at the millimeter scale can realize stable combustion with excellent cooperation for the thermodynamic cycle under appropriate structural and operating conditions, which is essentially not inferior to those in conventional-sized reciprocating piston internal combustion engines. This finding helps the next step of scaling down reciprocating piston internal combustion engines.

H2S induced in-situ formation of recyclable metal sulfide-based sorbent for elemental mercury sequestration in natural gas

Enlightened by the phenomenon that hydrogen sulfide (H2S) can readily decompose on metal oxides to generate sulfide species and the obtained metal sulfides are generally adopted as Hg-affine ligands for Hg0 capture, a urea modified copper oxide (U-CuO) was prepared via high-temperature calcination of the mixture of urea and copper nitrate for Hg0 removal in natural gas containing H2S. Benefitted from the decomposition of urea and the release of gaseous decomposition products, the as-synthesized U-CuO was enriched with abundant base sites and lattice oxygen, and characterized with developed textural features, which facilitates the diffusion and adsorption of H2S and subsequent sequestration of Hg0. The Hg0 adsorption capacity and uptake rate of U-CuO under simulated natural gas (N2 + 500 ppm H2S+8% H2O) reached as high as 134.06 mg g−1 and 58.32 μg g−1 min−1, respectively, which largely surpassed those of most CuS-based sorbents for Hg0 immobilization. Besides, U-CuO sorbent also exhibited satisfactory recyclability only through simple thermal treatment, the Hg0 removal efficiency of U-CuO maintained above 97 % even after ten adsorption-regeneration rounds. This preparation strategy not only provides valuable hints to guide the design and synthesis of Hg0 sorbents used for natural gas containing H2S but also inspires further investigation for the cost-effective performance enhancement of Hg0 sorbents.

Association between United States Environmental Contaminants and the Prevalence of Psoriasis Derived from the National Health and Nutrition Examination Survey.

(1) Background: Prolonged coexposure to environmental contaminants is reportedly associated with adverse impacts on skin health. However, the collective effects of contaminant mixtures on psoriasis prevalence remain unclear. (2) Methods: A nationally representative cohort study was conducted using data from the National Health and Nutrition Examination Survey 2003-2006 and 2009-2014. The association between contaminant exposures and psoriasis prevalence was analyzed through weighted quantile sum regressions, restricted cubic splines, and multivariable logistic regression. (3) Results: 16,453 participants and 60 contaminants in 8 groups were involved. After adjusting for demographics and comorbidities, exposure to urinary perchlorate, nitrate, and thiocyanate mixtures (OR: 1.10, 95% CI: 1.00-1.21) demonstrated a significant positive linear association with psoriasis prevalence. Ethyl paraben (OR: 1.21, 95% CI: 1.02-1.44) exhibited a significant positive correlation with psoriasis risk as an individual contaminant. The association between blood cadmium, lead, and mercury mixtures (OR: 1.10, 95% CI: 1.00-1.21), urinary perchlorate, nitrate, and thiocyanate mixtures (OR: 1.16, 95% CI: 1.00-1.34), and psoriasis prevalence was more pronounced in the lower healthy lifestyle score subgroup. (4) Conclusions: Exposure to perchlorate, nitrate, and thiocyanate mixtures, and ethyl paraben was associated with an elevated psoriasis prevalence. Furthermore, the association between cadmium and lead and mercury mixtures as well as perchlorate, nitrate and thiocyanate mixtures, and psoriasis prevalence was more pronounced in individuals with less healthy lifestyles.

Coating of the Surface of 316L Stainless Steel with Hydroxyapatite Produced from Eggshell Using the Sol-Gel Method

In this study, the production of high-yield and purity calcium nitrate from eggshell, a biological waste, and the usability of the obtained calcium nitrate in the production of hydroxyapatite (HAP) by the sol-gel method were investigated. In addition, the obtained HAP was used to coat 316L steel using the dip coating method. For this purpose, calcium nitrate, which will be used as a precursor in HAP production, was produced from chicken eggshells with high calcium carbonate content. The surface of 316L stainless steel discs was coated with sol-gel obtained from a mixture of calcium nitrate and triethyl phosphite by dip-coating method. Then, the 316L discs were dried and heat treated at 500 °C to form HAP on their surfaces. XRD and SEM techniques were used for the characterization of the obtained HAP structure. Unlike previous studies, it has been shown that chicken eggshell, a biological waste, can be used to produce HAP, a biocompatible material, and the surface of 316L stainless steel can be coated with the produced HAP.

Light Pyrotechnics Using Gunpowder Derived from Fly Ash Bottom Ash (FABA) Waste and Activated Carbon

Pyrotechnic materials are a category of materials that are often used in various applications, including military activities, lighting, signaling, and combat effects. In this study, an experiment was conducted to create a light pyrotechnic material using gunpowder, which is a mixture of potassium nitrate, sulfur, and activated carbon. The manufacturing process involved the activation of carbon from fly ash bottom ash (FABA) waste and the composition of different pyrotechnic materials. The experiment involved testing pyrotechnic compositions with varying ratios of KNO3 : carbon : sulfur. The results showed that the composition with a ratio of 15 : 7.5 : 7.5 produced the highest light intensity, reaching 104 lux, and provided optimal visual effects. In addition, the relative proportions of oxidizer, carbon and sulfur affected the type of pyrotechnic effect produced. Pyrotechnic light generation from gunpowder could be considered successful, and the best composition for spectacular visual effects was a ratio of 15 : 7.5 : 7.5. However, sufficient caution and knowledge were required in the use of pyrotechnic materials to ensure safety and compliance with applicable regulations.

Valorization of banana waste by optimizing nitrocellulose production, yield, and solubility via nitrating acid mixtures and reaction time

The current research investigated the conversion of banana stem waste into cellulose nitrate, a potential bioplastic precursor. The research is of prime importance in terms of environmental pollution and sustainable development goals. The study aimed to isolate cellulose from banana stems, synthesize nitrocellulose, and assess its stability. Two different methods, that is, Method A, comprising HNO3 and H2SO4, and Method B, comprising HNO3 and P2O5, were applied to synthesize nitrocellulose, each using different acidic mixtures. Method A resulted in high nitrocellulose yield and higher nitrogen content but lower cellulose content. On the other hand, method B yielded nitrocellulose with a lower nitrogen content but higher cellulose content. It was found that composition of nitrating acid mixture, nitrating time, and ratio of nitrating acid–cellulose material influenced the yield and solubility of nitrocellulose. The highest yield of nitrocellulose was obtained using a 60:1 ratio of nitrating acid–cellulose material in method A and a 100:1 ratio of the same in method B after 90-min nitration time. It was also observed that nitrocellulose A was soluble in acetone and pyridine whereas nitrocellulose B was soluble in 1,4-dioxane, esters, and pyridine. Overall, the study demonstrated the feasibility of converting banana stem waste into a bioplastic precursor.

Energy and exergy analysis of an experimental NH3-LiNO3 air-conditioning absorption system

An energy and exergy analysis of an experimental air-conditioning absorption system operating with the ammonia-lithium nitrate mixture has been performed. The system was operated under controlled and steady-state conditions. The main operating parameters, such as flow ratio, coefficient of performance, exergy coefficient of performance, and exergy destruction in each one of the main components, were determined at different heat sources and condensing temperatures. The coefficients of performance varied between 0.5 and 0.65, while the exergy coefficients of performance varied between 0.1 and 0.2. Clear trends were found for the coefficient of performance and flow ratio as a function of the generator and condenser temperatures; however, no trends were found in the exergy coefficients of performance due to the high variability of the ambient temperature. The highest values of the exergy destruction occurred in the generator, followed by the condenser and the evaporator, while the lowest values were obtained in the absorber and the economizer.

Photocatalytic degradation of methylene blue under visible light by cobalt ferrite nanoparticles/graphene quantum dots.

A simple approach was developed to synthesize cobalt ferrite nanoparticles/graphene quantum dots (CF/GQDs). The material was prepared from a homogeneous mixture of iron nitrate, cobalt nitrate, and starch at 140, 180 and 200 °C in a 24 h thermal hydrolysis process. The obtained materials were characterised by using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, ultraviolet-visible diffuse reflectance spectroscopy, Fourier-transform infrared spectroscopy, photoluminescence spectroscopy, vibrating-sample magnetometry, and nitrogen adsorption/desorption isotherms. Cobalt ferrite crystals of around 8-10 nm and graphene quantum dots formed directly at 200 °C. Stacking GQDs sheets onto the CF nanoparticles resulted in CF/GQDs nanoparticles. The nanocomposite exhibits satisfactory fluorescent and superparamagnetic properties, which are vital for catalytic applications. The CF/GQDs catalyse significantly the degradation of methylene blue (MB) under visible light. The catalyst can be recycled with an external magnetic field and displays suitable stability. Also, it was reused in three successive experiments with a loss of efficiency of about 5%. The CF/GQDs are considered as an efficient photocatalyst for MB degradation and other dyes.

Silver Dendrite‐Coated Silicon Pyramid Substrate as Surface‐Enhanced Raman Scattering Probe for Detecting Glucose

Raman spectroscopy offers a rapid and nondestructive method for qualitatively and quantitatively analyzing the molecular structure of substances. Herein, a facile and cost‐effective approach for the preparation of three‐dimensional (3D) surface‐enhanced Raman scattering (SERS) substrates is proposed, in which pyramid structures are fabricated using silicon anisotropic wet etching and silver dendrites are decorated on these silicon pyramid (PSi) substrates by immersing them in a mixture of hydrofluoric acid and silver nitrate for several minutes. The 3D SERS substrates, based on PSi coated with Ag dendrites, reveal high‐performance SERS enhancement (with an analytical enhancement factor reaching 3.54 × 1010) and can detect rhodamine 6G (R6G) in the presence of chemical enhancer (lithium chloride) at low concentrations down to 10−11 m. For glucose detection, 2‐thienylboronic acid is employed to faciliate glucose attachment to the substrate surface, achieving a detection limit as low as 10−6 m. The substrate exhibits good repeatability with a relative standard deviation of 11.223%, as well as reusability and long‐term stability for detection. The results also highlight the excellent sensitivity of the PSi‐based SERS substrate, which is expected to be instrumental in biochemical analysis and holds significant potential for developing noninvasive glucose sensor for diabetic patients using saliva samples.

Universal Synthesis of Single-Atom Catalysts by Direct Thermal Decomposition of Molten Salts for Boosting Acidic Water Splitting.

Single-atom catalysts (SACs) are considered prominent materials in the field of catalysis due to their high metal atom utilization and selectivity. However, the wide-ranging applications of SACs remain a significant challenge due to their complex preparation processes. Here, a universal strategy is reported to prepare a series of noble metal single atoms on different non-noble metal oxides through a facile one-step thermal decomposition of molten salts. By using a mixture of non-noble metal nitrate and a small-amount noble metal chloride as the precursor, noble metal single atoms can be easily introduced into the non-noble metal oxide lattice owing to the cation exchange in the in situ formed molten salt, followed by the thermal decomposition of nitrate anions during the heating process. Analyses using aberration-corrected high-angle annular dark-field scanning transmission electron microscopy and extended X-ray absorption fine structure spectroscopy confirm the formation of the finely dispersed single atoms. Specially, the as-synthesized Ir single atoms (10.97 wt%) and Pt single atoms (4.60 wt%) on the Co3O4 support demonstrate outstanding electrocatalytic activities for oxygen evolution reaction and hydrogen evolution reaction, respectively.

Oxidative amidation of aldehydes with amine in a mixture of choline chloride and aluminium nitrate as oxidant and solvent

Amides can be synthesized directly from aldehydes and amines in high yield using a catalyst. The reaction, involving aldehydes and amines, was carried out in a mixture containing choline chloride and aluminum nitrate as a solvent and a catalyst to produce amides. Such catalyst was far more effective compared to other current catalytic systems. The reaction consistently gave exceptionally remarkable results for various aldehyde and amine derivatives under the specified reaction conditions. This method offers several advantages, including easy separation of products, efficiency, environmentally safe nature of the solvent, and elimination of expensive and hazardous catalysts. These features emphasize the importance of such groundbreaking reactions. Due to the significant polar characteristics and insolubility of the resulting products in water, the addition of water into the reaction mixture facilitates the easy separation of the products from the reaction medium. Consequently, this particular ionic liquid method provides a simple route for the synthesis of these important compounds.

Bi, K co-doped graphitic phase carbon nitride for efficient photocatalytic H2O2 production

The emerging photocatalytic production of hydrogen peroxide (H2O2) using graphitic carbon nitride (g-C3N4) has attracted a lot of attention for its potential applications in various fields. However, However, the catalytic activity of pure g-C3N4 is still limited. Herein, Bi, K co-doped g-C3N4 (BixKy-CN) was prepared by co-thermal polymerization of a mixture of potassium nitrate, bismuth nitrate, melamine, and urea. The obtained Bi3.6K3-CN composite possesses more negative conduction and valence band positions that can, to some extent, enhance photocatalytic performance by lowering the energy barrier of redox reactions and by enhancing electron absorption capacity. Additionally, the pyrolysis process of the potassium nitrate and bismuth nitrate has a considerable impact on the formation of the morphology of g-C3N4, generating a porous lamellar-structure with nitrogen defects, resulting in increased oxygen adsorption and utilization capacity. These synergistic effects enable Bi3.6K3-CN to exhibit excellent photocatalytic activity and cycling stability for H2O2 production. After 3 hours of visible light irradiation, the production of H2O2 catalyzed by Bi3.6K3-CN can reach 1207.72 μmol L-1, which is 57 times higher than that of pure g-C3N4.

In situ conversion of ZnO anchored on porous carbon foams to antiflexible ZIF-8-X (X = Co or NH2) for sieving linear and mono-branched hexane isomers

Efficient separation of linear hexane from their isomers is a vital petrochemical process to produce high-quality gasoline. Zeolitic imidazolate frameworks-8 (ZIF-8), one of the most famous metal-organic frameworks (MOFs), is a promising separation material due to its special pore size (3.4 Å), whereas the flexible framework limited its separation ability, showing unsatisfied trade-off between adsorption capacity and separation selectivity. Here, we propose a novel strategy of post metal-oxide modification (PMOM) to suppress ZIF-8 flexibility by in situ growth on rigid layer of porous carbon foam (PCF) based the intermediation of anchored ZnO nanoparticles directly obtained from the pyrolysis of sucrose and zinc nitrate mixture. Afterwards, synergistic flexible suppression technology (SFST) was adopted to design antiflexible PCF/ZIFs with mixed-metal and mixed-ligand, including bi-metal PCF/ZIF-8-Co and di-ligand PCF/ZIF-8-NH2. Therein, the tight interfaces generated with benzene-ring inhabited the swinging of linkers and hindered 3-MP entry into the pore channels, showing both remarkable nHex adsorption capacity (q = 2.26 mmol·g−1) and nHex/3-MP selectivity (Su = 9.42). Moreover, bi-component adsorption experiments confirm the practical separation performance and cycling stability, showing promising application in adsorptive separation processes.

Associations of perchlorate, nitrate, and thiocyanate exposure with arthritis and inflammation indicators in young and middle-aged adults, NHANES 2005-2016.

Perchlorates, nitrates, and thiocyanates are prevalent environmental chemicals. Their potential association with arthritis remains unexplored. This study aimed to investigate the link between perchlorate, nitrate, and thiocyanate exposure and arthritis, as well as the potential role of inflammation in this context. Utilizing the National Health and Nutrition Examination Survey (NHANES) data spanning from 2005 to 2016, the study enrolled 6597 participants aged 20-59 (young and middle-aged), of which 1045 had arthritis. Employing multivariate logistic regression modeling, multiple linear regression models, restricted cubic spline analysis, Bayesian kernel machine regression (BKMR) modeling, and mediation analysis, we assessed these relationships. There was a significant positive association between elevated urinary thiocyanate levels and arthritis risk [1.19 (1.11, 1.28)]. This association held true across subgroups of osteoarthritis (OA) [1.24 (1.10, 1.40)] and rheumatoid arthritis (RA) [1.33 (1.15, 1.55)]. Thiocyanate levels displayed a dose-dependent relationship with arthritis risk, showing a linear trend (nonlinear P > 0.05). Conversely, perchlorate and nitrate did not exhibit associations with arthritis risk. BKMR outcomes highlighted a positive correlation between a mixture of perchlorate, nitrate, and thiocyanate and arthritis risk, with thiocyanate being the predominant predictors. Moreover, BKMR and generalized linear model analyses unveiled no significant synergistic effect of urinary perchlorate, nitrate, and thiocyanate on arthritis risk. Furthermore, thiocyanate exposure has been linked to elevated levels of inflammatory indicators (white blood cell, neutrophils, lymphocytes, and systemic immune-inflammatory index (SII)). Heightened thiocyanate exposure may be linked to elevated arthritis risk, either single or in combined effects. Additionally, thiocyanate exposure is associated with heightened inflammation levels.

Bamboo-shaped N-doped carbon nanotubes encapsulated with Co nanoparticles for improved microwave absorption properties

High reflection loss and wide absorption bandwidth materials are in great demand to prevent electromagnetic pollution and military applications. The composites prepared by combining different components with good dielectric and magnetic losses are expected to achieve ideal absorbing performance. In this study, a composite of cobalt nanoparticles enveloped in nitrogen-doped bamboo-like carbon nanotubes (Co@N-CNTs) was prepared by one-step annealing the mixture of melamine and cobalt nitrate at 800 °C in a mixed atmosphere of hydrogen and argon. Co nanoparticles derived from the reaction between H2 and cobalt nitrate during the sintering process were used as catalysts to prompt the carbonization of melamine and the formation of the bamboo-shaped N-doped carbon nanotubes, thus forming the composite structure of bamboo-shaped N-doped carbon nanotubes encapsulated with Co nanoparticles. This Co@N-CNTs composite not only had an excellent dielectric loss and magnetic loss but also greatly improved its impedance matching, thus having good electromagnetic wave absorption performance. The coating made from the Co@N-CNTs composite had a maximum reflection loss (RL) of −35.89 dB at only 1.8 mm thickness at 14.1 GHz and possessed an effective absorption bandwidth of up to 4.91 GHz (12.35–17.26 GHz), suggesting it a high-performance and wide-absorption bandwidth composite material.