Abstract
The ionic liquid hydroxylammonium nitrate (HAN) is a promising propellant for various types of spacecraft propulsion systems. With respect to combustion and plasma-based electric propulsion, the thermal decomposition of HAN into gas phase species provides a convenient feed gas supply. While the decomposition of HAN in the liquid phase has been extensively studied, little is known about the decomposition chemistry of HAN vapor interacting with heated surfaces. The ability to decompose HAN vapor on a reactive surface could provide a means to control the feed gas composition and enhance the performance of spacecraft propulsion systems.In this initial qualitative study, HAN was vaporized and thermally decomposed using porous 316-stainless-steel and quartz disks under vacuum conditions. Decomposition products with low vapor pressures would condense on an in-line quartz tube which was subsequently collected and analyzed with Raman spectroscopy, NMR spectroscopy, and FT-IR spectroscopy. At temperatures above 440 K the 316-stainless-steel system produced significant quantities of ammonia which reacted with vaporized nitric acid to form ammonium nitrate. Temperatures below 440 K yielded partial HAN decomposition which resulted in a binary mixture of HAN and ammonium nitrate. The degree to which HAN was consumed was determined by analysis of the 1008 cm−1N-OH asymmetric Raman band of HAN and the 1049 cm−1 symmetric stretching Raman band of the nitrate ion, NO3−. The quartz system yielded significantly different results with no ammonium nitrate detected at temperatures above 440 K. Reformed HAN was the primary product detected at lower temperatures. The difference in reported measurements and visual observations highlights the distinct differences in HAN vapor decomposition chemistry from the two materials examined.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have