Neutron Source Research Articles

NeutralNet: Development and testing of a machine learning solution for pulse shape discrimination

Accurate description of radiation fields containing neutrons continues to be a difficult task to complete. This difficulty arises because of the inherent sensitivity of neutron detectors to other types of radiation, and the ability of neutrons to generate secondary particles producing mixed field environments. This research looks at the development and performance of various machine learning architectures when applied to the task of pulse shape discrimination with liquid scintillators. This work was carried out with a neutron sensitive liquid scintillator, EJ-301, with signals digitized at 3.2 GHz with 12 bits of resolution utilizing a CAEN DT-5743 digitizer. Measurements were artificially reduced in sampling depth and frequency to investigate the importance of these parameters for performance of the machine learning algorithms. Two isotopic neutron source, 238Pu9Be and 241Am9Be, and three photon sources: 24Na, 60 Co, and 137Cs were used for generation of the training and validation sets as well as for energy calibration. The greatest performance was achieved with a lightly altered implementation of GoogLeNet and with the full sampling rate and bit depth afforded by the digitizer. A true positive rate of 69.17 % was achieved while correctly rejecting 99.9999 % of photon events. This performance ranges from 1.30 % at events greater than 3 MeVee to 89.96 % between 340–1000 keVee. For neutron events with energy below 200 keVee 21.48 % of the validation neutrons are still identified as neutrons.

Mapping the elemental distribution in archaeological findings through advanced Neutron Resonance Transmission Imaging

This work highlights recent application of energy-selective neutron imaging at the ISIS Neutron and Muon Source, specifically focusing on the development of Neutron Resonance Transmission Imaging (NRTI) at the INES instrument. NRTI is a nuclear technique based on resonant neutron absorption reaction, which combines the sensitivity to elemental and isotopic composition with detailed morphological information, using the epithermal portion of the neutron flux available on the INES instrument at the ISIS facility. Unlike standard neutron radiography and tomography methods, NRTI preserves detailed time and energy information for each detector pixel, enabling enhanced visualisation of elemental distribution inside an object’s volume, with the potential for quantitative elemental analysis. These features combined with the non-destructiveness of NRTI make the method promising for applications in the field of Cultural Heritage, especially when it is employed in a multi-technique approach to provide complementary information about the composition and the crystalline structure of archaeological artefacts. A study related to Heritage Science is presented to demonstrate the effectiveness of NRTI in non-destructive investigations of inhomogeneous artefacts, specifically focusing on the excavation finds related to the first evidence of ancient brass production in Milan, Italy, during Roman times.

Global characterization of a laser-generated neutron source

Laser-driven neutron sources are routinely produced by the interaction of laser-accelerated protons with a converter. They present complementary characteristics to those of conventional accelerator-based neutron sources (e.g. short pulse durations, enabling novel applications like radiography). We present here results from an experiment aimed at performing a global characterization of the neutrons produced using the Titan laser at the Jupiter Laser Facility (Livermore, USA), where protons were accelerated from 23 $\mathrm {\mu }$ m thick plastic targets and directed onto a LiF converter to produce neutrons. For this purpose, several diagnostics were used to measure these neutron emissions, such as CR-39, activation foils, time-of-flight detectors and direct measurement of $^7{\rm Be}$ residual activity in the LiF converters. The use of these different, independently operating diagnostics enables comparison of the various measurements performed to provide a robust characterization. These measurements led to a neutron yield of $2.0\times 10^{9}$ neutrons per shot with a modest angular dependence, close to that simulated.

37Ar source on-demand production and deployment for low-energy nuclear recoil measurement in ReD liquid Argon TPC

The search for light dark matter (< 10 GeV/c 2) has become increasingly important, since no conclusive evidence has been found in the higher dark matter (DM) mass region. In order to explore this light mass range, it is necessary to accurately model the response of the noble liquid time projection chamber (TPC) detectors, used in many experiments aimed at the direct measurement of DM, to low energy (< 1 keV) nuclear recoils (NRs). In this respect, 37Ar provides an ideal calibration source in the low-energy region due to its two low-energy peaks at 0.27 and 2.82 keV following electron capture with a 35-day half-life. We propose a method to produce 37Ar without chemical or heating treatments by using the 40Ca(n,α)37Ar reaction. This can be achieved by irradiating nano-CaO powder with a neutron source (e.g. AmBe) and allowing the produced 37Ar to diffuse into the argon used inside a double-phase TPC. By measuring the NR yields relative to those two low-energy points in the Recoil Directionality (ReD) experiment, other detectors can be cross-calibrated with the same source deployed. In this talk, the 37Ar source production, its deployment, and preliminary results will be presented.

Calibration and validation measurements of the Extended-range Bonner sphere spectrometer

An Extended-range Bonner sphere spectrometer (EBSS) has been developed to investigate the neutron spectra of the China initiative Accelerator Driven System. This paper presents the design, calibration, and validation measurements of the EBSS system using a standard 241Am-Be neutron source and the cosmic ray neutrons. The EBSS system was simulated using the PHITS code, and the geometric structures were designed using the response functions obtained by simulations. The EBSS system comprises of seven polyethylene-only spheres and seven extended-range spheres encased in lead, copper, or tungsten shells along with a bare 3He proportional counter. To verify the accuracy of the simulated response functions, the EBSS system was calibrated with monoenergetic neutron beams of 565 keV at the China Institute of Atomic Energy in Beijing. The EBSS system was used to measure neutron count rates of the 241Am-Be neutron source and cosmic ray neutrons. Subsequently, the measured neutron count rates were converted into neutron spectra by the unfolding software. Experimental findings demonstrate the precise capability of the EBSS system to measure neutron spectra across a wide range of neutron radiation fields.

Estimating spent fuel burnup with Neutron measurements: A Practical Rule of Thumb Equation

We present a concise equation correlating the burnup of spent nuclear fuel (SF) with the neutron count rate, developed through comprehensive data analysis from Origen-ARP and MCNP codes. This equation is applicable to Fork detectors, commonly used for verifying SF assemblies before their transfer to new storage sites. The detector is assumed to be a helium-3 detector. The reaction rate (RR) in the 3He detector is influenced by Total Neutron Source Intensity (TNSI), net neutron multiplication, and neutron capture during transit to the detector. TNSI emerges as the most influential factor. Two scenarios were explored: one involving pure water and the other with water containing 2000 ppm of boron. The characteristics of the concise equation are also analyzed.

Design and beam dynamics validation of a spiral FFAG accelerator for CSNS-II

The fixed-field alternating gradient (FFAG) accelerator, with its compact structure and the combined advantages of high energy from synchrotrons and high beam intensity from cyclotrons, offers unparalleled benefits in accelerating protons, heavy ions, and short-lived particles such as muons and unstable nuclei. The China Spallation Neutron Source plans to establish an FFAG accelerator with a diameter of 20 meters at the end of the negative hydrogen linac for various purposes, including experiments in nuclear physics and medical applications. For this design, a scaling scheme using spiral magnets as the basic focusing structure is investigated to provide the proton beam with kinetic energy ranging from 300 MeV to 600 MeV. We present the design results for the scaling FFAG accelerator and discuss the optimization of the cell tune. A detailed beam dynamics verification and discussion of the proposed FFAG accelerator lattice are presented using the ray-tracing code Zgoubi, including off-axis optical characteristics, large amplitude transverse motion, and full-cycle longitudinal acceleration. The FFAG accelerator is demonstrated to provide a large transverse and longitudinal acceptance for the tracking beam in the designed lattice. A new simulation code based on Python for the study of FFAG accelerator beam dynamics has been developed, and the corresponding verification results are also presented.

Conceptual design of a macromolecular diffractometer for the Jülich high brilliance source.

In this work, a concept for a neutron diffractometer for high-resolution macromolecular structures has been developed within the Jülich High Brilliance Neutron Source (HBS) project. The SELENE optics are adapted to the requirements of the instrument to achieve a tunable low background neutron beam at mm2 scale sample area. With the optimized guide geometry, a low background neutron beam can be achieved at the small sample area with tunable divergence and size. For the 1 × 1mm2 sample, a flux of 1.10 × 107 n/s/cm2 for 0.38° divergence is calculated in the 2-4Å wavelength range, which is about 84.6% of the flux at MaNDi of the high-power spallation source SNS at ORNL. Virtual neutron scattering experiments have been performed to demonstrate the instrument's capabilities for studies of mm scale samples with large unit cells. Results of Vitesse simulations indicate that unit cell sizes of up to 200Å are possible to be resolved with the proposed instrument.

A clock synchronization and trigger distribution scheme for China Spallation Neutron Source

China Spallation Neutron Source (CSNS) is a complex system engineering composed of particle accelerators, a target station, and neutron spectrometers with various equipment types and distribution. The collaborative operation of the equipment requires accurate clock synchronization and trigger distribution. Currently, to meet the requirements of different system devices, clock synchronization and trigger distribution in CSNS are implemented based on different methods, resulting in complex clock and trigger networks, demanding upgrades, and a lack of unified timestamps. This paper proposes a clock synchronization and trigger distribution scheme based on the field-programmable gate array (FPGA) and single-mode dual-core fiber link. The decoupling of clock phase synchronization and time base synchronization improves the frequency of phase compensation. Benefiting from the phase interpolator (PI) in the FPGA transceivers, high-precision phase compensation and phase deterministic control are realized, achieving picoseconds synchronization precision and stability in the four-level network. Based on the custom lightweight link layer protocol, by optimizing the routing method of data frames and adopting priority control, the transmission of multiple data is realized, and the hardware delay of the critical data, such as interlock, is guaranteed to be less than 1.5 μs in the four-level system. The scheme provides a general precise clock synchronization and distributed trigger method for CSNS devices, simplifies the system complexity, and is conducive to the system upgrade in the second stage.

Feasibility of medical radioisotope production based on the proton beams at China Spallation Neutron Source

Feasibility of medical radioisotope production based on the proton beams at China Spallation Neutron Source

Holocene hydroclimate variability of the Baltic region inferred from stable isotopes, d-excess and multi-proxy data at lake Nuudsaku, Estonia (NE Europe)

Long-term hydroclimate records provide an opportunity to understand potential drivers of the past, and give context to modern and future climate warming. A wide variety of proxy data now allow for reconstruction of climate variables that were not previously possible. Here we present a multi-proxy dataset including n-alkane δ2H (δ2Hn-alk) values from an open-basin lake in Estonia to reconstruct past hydroclimate conditions for the eastern Baltic region. We complement our sedimentary δ2Hn-alk data with existing carbonate-based oxygen stable isotope (δ18O) data to derive deuterium (d-) excess. We present multiple isotopic records and reconstructed relative humidity (ΔRH) values over the Holocene, and link these with modern precipitation δ2H and δ18O values to guide the interpretation of the paleo-proxies. Fossil pollen and chironomid-based temperature reconstructions, as well as biogeochemical data provide additional information for inferring past environmental changes. Our results indicate that the middle Holocene in Estonia had on average 6 ± 3% higher RH values than the late Holocene. The δ18O and δ2H values were also higher during the middle Holocene, which we interpret as increased warm season precipitation. Our reconstructed d-excess values were relatively higher during the middle Holocene, indicating a more northerly or cold source water origin, in comparison to the late Holocene. In addition to the paleoclimatic significance, our results show how multiple quantitative proxies can be combined to characterize hydroclimate sensitivity to changes in relative humidity, temperature and moisture source.

Studies on potential moderator materials for very cold neutron sources

Studies on potential moderator materials for very cold neutron sources

Development of a phoswich imaging detector to simultaneously acquire neutron and gamma photon images

A neutron detector requires selectively detecting neutrons not detecting gamma photons. However, since gamma photons are commonly emitted from a neutron source, the separation of neutrons and gamma photons is sometimes difficult. To solve this problem, we developed a phoswich imaging detector that can simultaneously but independently acquire images of neutrons and gamma photons. The developed neutron imaging system consists of a lithium-containing silver doped zinc sulfide (Li–ZnS(Ag)) plate stacked on a cerium doped yttrium aluminum perovskite (YAP(Ce)) plate to form a phoswich detector, which is optically coupled to a position sensitive photomultiplier tube (PSPMT). Neutrons are detected by the Li–ZnS(Ag) plate while gamma photons are detected by the YAP(Ce) plate. The scintillation light from the Li–ZnS(Ag) and YAP(Ce) plates is detected by the PSPMT, and the position of interaction is calculated. Pulse shape discrimination is used to separate the images of neutrons and gamma photons. The spatial resolution of the imaging detector for neutrons is ∼2.6 mm FWHM, and the sensitivity for 252Cf neutrons at 2 cm from the source enclosed in 2-cm-thick polystyrene plates is 5.2 cps/MBq. The spatial resolution of the imaging detector for gamma photons is also ∼2.6 mm FWHM, and the sensitivity for 60Co gamma photons at 2 cm from the source within 2-cm-thick polystyrene plates is 375 cps/MBq. The contamination by gamma photons in the neutron window was negligible. The developed phoswich imaging detector can simultaneously and independently acquire the images of neutrons and gamma photons, and thus it will impact the relevant research and applications of neutron detectors and imaging.

A science-driven approach to optimize the design for a biological small-angle neutron scattering instrument

Biological small-angle neutron scattering (SANS) instruments facilitate critical analysis of the structure and dynamics of complex biological systems. However, with the growth of experimental demands and the advances in optical systems design, a new neutron optical concept is necessary to overcome the limitations of current instruments. This work presents an approach to include experimental objectives (i.e. the science to be supported by a specific neutron scattering instrument) in the optimization of the neutron optical concept. The approach for a proposed SANS instrument at the Second Target Station of the Spallation Neutron Source at Oak Ridge National Laboratory, USA, is presented here. The instrument is simulated with the McStas software package. The optimization process is driven by an evolutionary algorithm using McStas output data, which are processed to calculate an objective function designed to quantify the expected performance of the simulated neutron optical configuration for the intended purpose. Each McStas simulation covers the complete instrument, from source to detector, including realistic sample scattering functions. This approach effectively navigates a high-dimensional parameter space that is otherwise intractable; it allows the design of next-generation SANS instruments to address specific scientific cases and has the potential to increase instrument performance compared with traditional design approaches.

Operational Status and Future Plan of Proton Linear Accelerator at KOMAC

Since the second half of 2013, Korea Multi-purpose Accelerator Complex (KOMAC) has been supporting user beam service by using a 100-MeV proton linac and several beam line facilities. Proton beam service fields include various applications and research programs, such as material science, bio-medical science, semiconductor applications as well as nuclear physics and basic science. The 100-MeV linac is composed of an injector based on a 50-keV microwave ion source and two-solenoid LEBT (low energy beam transport), a 3-MeV RFQ with four-vane structure and conventional drift tube linac (DTL), where proton beam is accelerated from 3 MeV to 100 MeV. As the operation period of the proton accelerator exceeds 10 years and the cumulative operating time surpasses 30,000 hours, we judge that it is an opportune time to establish a long-term plan to prepare for the aging of the accelerator. To replace the currently operating RFQ, which shows degradation in performance (especially the beam transmission), we design a new RFQ with some modifications. For DTL, we are supposed to change the quadrupole magnet inside each drift tube from electromagnet type to permanent magnet type because the electromagnet has shown some trouble in view of long term stability. To leap forward in device and utilization technologies, we complete the construction of new facility of a Beam Test Stand (BTS) with a structure similar to the beam injection system (ion source, LEBT, RFQ) of the 100 MeV linear accelerator. We plan to actively conduct beam physics and accelerator research using this facility. Moreover, we are supposed to upgrade the proton linac to 1 GeV for spallation neutron source applications, which will be a long-term plan. In short term, we take phased approach with focusing the first phase at 200 MeV energy upgrade.

Neutron emission characterization of IPR 14 MeV neutron generator

Accelerator-based neutron sources are being developed worldwide due to their wide applications. Institute for Plasma Research in India has developed an accelerator-based high-yield 14 MeV neutron generator based on deuterium-tritium (D-T) reaction to perform fusion-related benchmark experiments. This neutron generator is designed to produce 1012 neutrons per second in both mode continuous and pulse. The emission of neutrons from an accelerator-based neutron generator is not isotropic due to target geometry and angular dependency of reaction cross-section. A detailed and accurate description of neutron source emission and distribution is required to use such a neutron generator for various experiments. The neutron generator is characterized using experiments and simulations to accomplish the request. Energy and angular distributions of emitted neutrons are measured using a calibrated single crystal diamond (SCD) detector. Experimental data of neutron distributions are used to validate source neutron definition for Monte Carlo N Particle (MCNP) simulation. An accurate model of the Titanium Tritide (TiT) target and its holder geometry is prepared for the simulation. Finally, to validate the simulation model, simulated neutron fluxes are compared with measured ones by the SCD detector. This paper discusses the methodology adopted to characterize emitted neutrons and its results.

Theoretical and experimental study on total heat recovery of condensing gas boiler flue gas by gas engine-driven compression heat pump

How to improve the utilization efficiency of natural gas and achieve the goal of carbon reduction has gradually become the focus of people’s attention. The exhaust temperature of the condensing gas boiler is between 50℃ and 80℃, which still contains some heat that is not used, so it is necessary to recover this part of the heat. This paper mainly studies the total heat recovery and utilization of waste heat from low-temperature flue gas of condensing gas boiler. In the research field of gas boiler flue gas waste heat recovery, the use of gas compression heat pump to recover gas boiler flue gas waste heat is still very few. Based on the principle of reducing the cold source temperature, a low-temperature flue gas recovery scheme of a gas engine-driven compression heat pump coupled condensing gas boiler is proposed. The low-temperature chilled water produced by gas engine-driven compression heat pump is used to recover flue gas waste heat from condensing gas boiler and gas engine, which can improve the utilization efficiency of natural gas and eliminate the “white smoke phenomenon” simultaneously. In addition, the waste heat of flue gas is used as the low-temperature heat source of gas engine-driven compression heat pump to ensure the stable operation of the heat pump in the low-temperature environment. The flue gas waste heat recovery technology has been improved compared with other flue gas waste heat recovery technologies in terms of primary energy utilization efficiency, system stability, corrosion resistance of flue gas heat exchangers, and investment recovery cycle. The experimental results show that when the water inlet temperature of the flue gas heat exchanger is 15℃, the overall power of the unit can reach 645 kW, and the final exhaust temperature is below 25℃. The overall primary energy utilization rate of the GEHP&CB can reach 110 %, which is 10 %∼20 % higher than that of the condensing gas boiler. The payback period of the increased initial investment is 1.4 heating seasons. Due to the improvement of natural gas utilization efficiency significantly reduces natural gas consumption and pollutant discharge.

The adsorption characteristics of helium under low temperature

To study the separation of helium isotopes by cryogenic adsorption, figuring out the adsorption characteristics of helium isotopes at low temperature is necessary. In this paper, a cryogenic adsorption measurement device has been established. It consists of a cryostat with a GM Cryocooler as cold source, a Setaram gas sorption instrument and a temperature controller. The helium-4 adsorption isotherms were studied under different temperatures and pressures (15–300 K, 0–1.5 MPa) by volumetric method. The results showed that a little helium was adsorbed by activated carbon at 300 K and 77 K. The amount of adsorbed helium increased with the temperature decreased from 20 K to 15 K. At pressures lower than 0.2 bar, the adsorption capacity increased rapidly as the pressure increased. Besides, the isosteric heats of adsorption were obtained, which was around 515 J/mol and changed little. Moreover, the cryogenic adsorption results were analyzed by Langmuir model and Toth model.

Design and analysis of steam methane reforming hydrogen liquefaction and waste heat recovery system based on liquefied natural gas cold energy

To improve the utilization rate of liquefied natural gas (LNG) cold energy, reduce hydrogen (H2) liquefaction cost, recover waste heat and reduce carbon dioxide (CO2) emission, this study designs a steam methane reforming (SMR) H2 liquefaction and waste heat recovery system based on LNG cold energy for the production of 10 tons of liquid hydrogen (LH2) per day. Parameters analyses and optimization, exergy analyses and economic analyses of the system are carried out and compared with other H2 liquefaction systems. The results show that: under the optimal conditions, the values of specific energy consumption (SEC), coefficient of performance (COP) and exergy efficiency (ƞex) were 5.93 kWh/kg LH2, 0.2225 and 53.24%, respectively. Exergy losses of system is mainly distributed in heat exchange equipment and compressors. Decreasing the heat exchange equipment cold and heat sources inlet temperature difference and reducing the compressors compression ratio were beneficial to reduce equipment exergy losses. The pre-cooling performance of LNG is better than that of liquid nitrogen (LN2) and mixed refrigerant (MR). Compared with the pre-cooling H2 liquefaction system without waste heat recovery, the SEC decreased by 0.26 kWh/kg LH2 and ƞex increased by 2.28%. Research results are conducive to resource conservation and environmental protection.

Exploring crucial technological advancements in Anger-Camera neutron detectors for single crystal neutron diffraction

In accordance with the second phase construction blueprint for the China Spallation Neutron Source (CSNS-II), the proposal includes the establishment of a single crystal neutron diffractometer. This apparatus necessitates a neutron detector array spanning over 1 m2 and capable of covering neutron diffraction angles from 20° to 160°. Additionally, the detector's position resolution must better than 1 mm × 1 mm. To meet such requirements, a scintillator neutron detector based on the Anger-Camera principle was designed. The detector is composed of a 6LiF/ZnS (Ag) scintillation screen, optical guide, silicon photomultipliers (SiPMs) array and self-design composite compression readout electronic systems. A detector prototype, featuring a detection area of 50 mm × 50 mm, was fabricated and subjected to testing at the BL20 neutron test line in the China Spallation Neutron Source (CSNS). The detector system achieved an optimal position resolution of 0.6 mm, while the maximum count rate was approximately 20 kHz. Moreover, the detector's Bragg edge imaging capability was preliminarily investigated using stainless steel samples, demonstrating its future potential for Bragg edge transmission imaging. The proposed detector demonstrates promising potential as a candidate for the single crystal diffractometer in CSNS-II.