Neutral Alumina Research Articles

Experimental Evidence for Zerovalent Pd(NHC) as a Competent Catalyst in C-N Cross-Coupling (NHC = DiMeIHeptCl).

Use of the branched N-heterocyclic carbene (NHC) ligand 1,3-bis(2,6-bis(3-methyl-1-(2-methylpropyl)butyl)phenyl)-4,5-dichloro-1,3-dihydro-2H-imidazole-2-ylidene (DiMeIHeptCl) facilitated the stabilization of several relevant intermediates for Pd(NHC)-catalyzed C-N cross-coupling reactions. Complexes [Pd(DiMeIHeptCl)]2(μ-N2), [Pd(DiMeIHeptCl)]2(μ-η2-1,2-η2-4,5-C6H6), and Pd(DiMeIHeptCl)(pyridine), representing zerovalent Pd(NHC) bearing labile ligands, were isolated and structurally characterized, along with divalent PdCl(Ph)(DiMeIHeptCl) and PdCl(Ph)(DiMeIHeptCl)(n-propylamine). The former is a 14-electron Pd complex, which is stable under air and chromatography on silica gel or neutral alumina. One possible reason for this exceptional stability is the numerous dispersion interactions between the NHC alkyl chains and the Pd-Ph group. Detailed investigations of catalyst activation and oxidative addition confirmed that "Pd(NHC)" is formed from many known Pd(II)(NHC) precatalysts and provided activation rates for these different precatalysts.

Determination of hexachlorophene residue in fruits and vegetables by ultra-high performance liquid chromatography-tandem mass spectrometry.

A modified QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) -LC-MS/MS method was developed for the determination of hexachlorophene in fruits and vegetables. Samples were extracted by acetonitrile and then salted with an acetate buffer system. Extractants neutral alumina (Al-N), strong cation exchange silica gel bonded adsorbent (SCX) and graphitized carbon black (GCB) were used for sample purification. The method demonstrates excellent accuracy and reproducibility. Under optimized conditions, the correlation coefficients of hexachlorophene were higher than 0.995 in the range of 0.5-20 ng/mL. The limit of quantification (LOQ) was 2.0 μg/kg. The average recoveries, assessed at three spiked levels (2.0, 4.0, and 20.0μg/kg) across various matrices including cabbage, celery, tomato, eggplant, potato, radish, cowpea, chives, apple, peach, grape, citrus, bitter melon, banana and hami melon ranged from 72.0 to 100.5% with relative standard deviations from 3.2 to 9.8% (n = 6).

High precision polishing of aluminum alloy mirrors through a combination of magnetorheological finishing and chemical mechanical polishing

After the aluminum alloy mirror machined by single point diamond turning (SPDT), the residual tool marks and surface accuracy of the aluminum alloy mirror cannot meet the requirements of visible or ultraviolet light system. In this study, a processing method combining magnetorheological finishing (MRF) and chemical mechanical polishing (CMP) is proposed to realize the polishing of aluminum alloy mirrors with high efficiency, high precision and high-quality. Firstly, the properties and composition of passivation layer after MRF were analyzed and the polishing performance of acidic, neutral and alkaline alumina polishing fluid on passivation layer were investigated based on the computer numerical control (CNC) polishing equipment. Based on the experimental results, a new acidic nano-silica polishing fluid which is suitable for the efficient and high-quality removal of passivation layers on aluminum alloy surfaces was developed. Finally, a combined approach of MRF-CMP was used to the directly polishing of a rapidly solidified aluminum mirror (RSA-6061) with a diameter of 100 mm after SPDT. With two iterative of MRF-CMP polishing in 220 minutes, the surface accuracy of the aluminum alloy mirror was improved from 0.1λ (λ=632.8 nm) to 0.024λ, and the surface roughness (Ra) decreased from 3.6 nm to 1.38 nm. The experiment results manifest that high precision, and high-quality aluminum alloy mirror can be achieved by MRF-CMP method with the new developed acid nano-silica polishing fluid and suitable MR polishing fluid. The research results will provide a new strategy for ultra-precision direct polishing of aluminum alloy mirrors and will also give the important technical support for the extensive use of aluminum alloy mirror in visible light and ultraviolet optical systems.

Dispersive Solid-Phase Extraction and Ultra-Performance Liquid Chromatography-Tandem Mass Spectrometry-A Rapid and Accurate Method for Detecting 10 Macrolide Residues in Aquatic Products.

The amount of macrolide (MAL) residues in aquatic products, including oleandomycin (OLD), erythromycin (ERM), clarithromycin (CLA), azithromycin (AZI), kitasamycin (KIT), josamycin (JOS), spiramycin (SPI), tilmicosin (TIL), tylosin (TYL), and roxithromycin (ROX), was determined using solid-phase extraction and ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). The residues were extracted with 1% ammonia acetonitrile solution and purified by neutral alumina adsorption. Chromatographic separation was completed on an ACQUITY UPLC BEH C18 column with acetonitrile-0.1% formic acid aqueous solution as the mobile phase, and mass spectrometry detection was performed by multiple reaction monitoring scanning with the positive mode in an electrospray ion source (ESI+). Five isotopically labeled compounds were used as internal standards for quality control purposes. The findings indicated that across the mass concentration span of 1.0-100 μg/L, there was a strong linear correlation (R2 > 0.99) between the concentration and instrumental response for the 10 MALs. The limit of detection of UPLC-MS/MS was 0.25-0.50 μg/kg, and the limit of quantitation was 0.5-1.0 μg/kg. The added recovery of blank matrix samples at standard gradient levels (1.0, 5.0, and 50.0 μg/kg) was 83.1-116.6%, and the intra-day precision and inter-day precisions were 3.7 and 13.8%, respectively. The method is simple and fast, with high accuracy and good repeatability, in line with the requirements for accurate qualitative and quantitative analysis of the residues for 10 MALs in aquatic products.

Solvent Free, Selective Oxidation of Styrene Catalyzed by Cobalt Acylpyrazolone Supported onto Neutral Alumina: Synthesis and Spectral Characterization

AbstractThe present work describes the synthesis of the Cobalt acylpyrazolone complex supported over neutral alumina and its use as a heterogeneous catalyst for selective oxidation of styrene. The catalyst mentioned here was characterized by various physicochemical techniques such as FT‐IR, TGA, CV, SCXRD, PXRD and BET. This heterogeneous catalyst has successfully been used to oxidize styrene to benzaldehyde in a solvent‐free condition with good conversion (87 %) and high selectivity (90 %) using H2O2 and TBHP as oxidants. The effects of the reaction parameters (catalyst concentration, reaction duration, and temperature) have also been investigated. The existing complex was discovered to be recyclable and sustainable with no change in conversion or selectivity for benzaldehyde. FT‐IR spectra of the regenerated catalyst indicated that the catalyst was undegraded and stable after the reaction. The novel feature of the current work reported in this paper is the selective oxidation of styrene without the need for solvents under mild conditions. Single Crystal Analysis.

Mild and Efficient Extraction of Fluorescent Chlorophyll a from Spinach Leaves for Application as the Sustainable Emitter in Light‐Emitting Electrochemical Cells

AbstractNatural pigments are sustainable compounds that can be employed as emitters, sensors and sensitisers in optoelectronics. The most abundant pigment, chlorophyll, offers advantages of easily available and plentiful feedstock, biodegradability and non‐toxicity. However, strenuous extraction and separation limit its application on larger scale. In this work, a practically mild and scalable extraction and separation method for rapid isolation of chlorophyll a from spinach is presented. Three different stationary phases for column chromatography were evaluated, and a new solvent system was developed for the elution of chlorophyll a on a neutral alumina chromatography column. The purified product was obtained with a yield of 0.98 mg ⋅ g−1 with respect to the dry leaves. A first light‐emitting electrochemical cell (LEC) based on chlorophyll a as the emitter is reported, using the extracted chlorophyll a as the guest compound dispersed in a blend‐host matrix in a concentration of 2.5 or 5 mass %. The higher‐chlorophyll‐concentration LEC exhibits emission solely from the chlorophyll emitter, with the main emission peak located at 675 nm. The lower‐chlorophyll‐concentration LEC features two distinct emission bands, one in the red region that is originating from the chlorophyll guest and one in the blue region (main peak at 430 nm) that stems from the blend host. This combined red:blue emission can be attractive for, e. g., greenhouse applications, since it matches the action spectrum of plant photosynthesis.

Development of novel heterogeneous cobalt acylpyrazolone catalyst: Synthesis, characterization and selective oxidation of styrene to benzaldehyde

Cobalt acylpyrazolone complex was prepared and characterized using various spectral methods, FT-IR, TGA, UV–visible, DRS, magnetic study, and single crystal XRD. A heterogeneous catalyst consisting of neutral alumina and cobalt complex was synthesized and characterized using various physicochemical methods and successfully applied to styrene oxidation without a solvent. The effects of the reaction variables (mole proportion of the reactantto hydrogen peroxide and TBHP, quantity of the catalyst, reaction period and reaction temperature) were investigated. No appreciable catalytic activity reduction occurred when the catalyst was utilised again. The catalyst's recycling is verified by infrared and diffuse reflectance spectra confirming that the catalyst was intact and notdestroyed following the process. The work's unique feature is its benzaldehyde selectivity under benign reaction circumstances.

Size onset of metallic behavior in neutral aluminum clusters.

The excited state lifetimes of neutral (Al)n clusters up to ∼1 nm in diameter in size, where n ≤ 43, are systematically measured with femtosecond time-resolved mass spectrometry. The onset of metallic behavior is identified as a distinct change in the relaxation behavior initiated with single ultraviolet (400 nm) photon excitation. The experimentally measured excited state lifetimes gradually decrease with size for small molecular scale clusters (n < 10) before becoming indistinguishable for larger clusters (n > 9), where the measurements are comparable to electron-lattice relaxation time of bulk Al (∼300 fs). Particularly intense, or magic, Aln clusters do not exhibit any significant excited state lifetime behavior. Time-dependent density functional theory quantify the excited state properties and are presented to show that dynamics are strongly tied to the excited state charge carrier distributions and overlap, rather than detailed changes related to changes in the cluster's electronic and geometric structure. The consistency in excited state lifetimes for clusters larger than n = 9 is attributed to the hybridization of the s- and p-orbitals as well as increasing delocalization. Al3 exhibits unique temporal delay in its transient behavior that is attributed to a transition from triangular ground state to linear structure upon excitation.

Identification and pretreatment analysis of endogenous degradation products of patulin in zebrafish

Identification and pretreatment analysis of endogenous metabolites of patulin (PAT) in zebrafish were successfully carried out using UHPLC-Q-Orbitrap-HRMS. Three major metabolites, namely hydroascladiol, E-ascladiol, and Z-ascladiol, were identified. They exhibited similar fragmentation pathways to PAT, with the structurally significant ions *b' and *c' generated through the cleavage of the side chains of *b and *c, respectively. These ions were crucial for confirming the modification site and have been confirmed as characteristic fragments for the identification of PAT metabolites.Furthermore, a pretreatment method for analyzing PAT and the three metabolites in zebrafish was proposed, using solid-phase-assisted liquid/liquid extraction (SLLE) and matrix solid-phase dispersion (MSPD) techniques. The initial purification process involved loading the aqueous phase onto a macroporous diatomaceous column, followed by elution with acetonitrile. Following this, neutral alumina powder was added to the organic phase, effectively eliminating interference from hydrophilic and lipid-soluble compounds through the optimization of this step. Due to their structural similarity, the three metabolites were semi-quantitatively analyzed using a PAT standard curve. The results demonstrated a good linear relationship in the concentration range of 0.001–0.02 μg/mL (r2 ≥ 0.999). The limit of detection for PAT and the three metabolites ranged from 0.01 to 0.03 mg/kg.

Pinacol Cross-Coupling Promoted by an Aluminyl Anion.

A simple sequential addition protocol for the reductive coupling of ketones and aldehydes by a potassium aluminyl grants access to unsymmetrical pinacolate derivatives. Isolation of an aluminium ketyl complex presents evidence for the accessibility of radical species. Product release from the aluminium centre was achieved using an iodosilane, forming the disilylated 1,2-diol and a neutral aluminium iodide, thereby demonstrating the steps required to generate a closed synthetic cycle for pinacol (cross) coupling at an aluminyl anion.

Reductive Coupling of a Diazoalkane Derivative Promoted by a Potassium Aluminyl and Elimination of Dinitrogen to Generate a Reactive Aluminium Ketimide.

The reaction of 9-diazo-9H-fluorene (fluN2 ) with the potassium aluminyl K[Al(NON)] ([NON]2- =[O(SiMe2 NDipp)2 ]2- , Dipp=2,6-iPr2 C6 H3 ) affords K[Al(NON)(κN1 ,N3 -{(fluN2 )2 })] (1). Structural analysis shows a near planar 1,4-di(9H-fluoren-9-ylidene)tetraazadiide ligand that chelates to the aluminium. The thermally induced elimination of dinitrogen from 1 affords the neutral aluminium ketimide complex, Al(NON)(N=flu)(THF) (2) and the 1,2-di(9H-fluoren-9-yl)diazene dianion as the potassium salt, [K2 (THF)3 ][fluN=Nflu] (3). The reaction of 2 with N,N'-diisopropylcarbodiimide (iPrN=C=NiPr) affords the aluminium guanidinate complex, Al(NON){N(iPr)C(N=CMe2 )N(CHflu)} (4), showing a rare example of reactivity at a metal ketimide ligand. Density functional theory (DFT) calculations have been used to examine the bonding in the newly formed [(fluN2 )2 ]2- ligand in 1 and the ketimide bonding in 2. The mechanism leading to the formation of 4 has also been studied using this technique.

Greener production of a starch-based nanohybrid material (core-shell) for the simultaneous extraction of persistent organic pollutants in shrimp samples

Here, a novel nanohybrid material (Ag@CD@ANS) based on oat starch was produced, characterized, and applied to extract persistent organic pollutants in a shrimp sample. By the characterization experiments, Ag@CD@ANS was successfully synthesized. The functionalization of the material by 1,2-naphthoquinone-4-sulphonic acid (ANS) was confirmed using the infrared technique and CHN elemental analysis. The isotherm study showed that the material has a high adsorption capacity for the pesticides of interest (flutriafol, atrazine, heptachlor, DDT and bifenthrin) allowing their extraction from shrimp samples. The optimal condition for extraction was obtained using multivariate analysis. The nature of the elution solvent (hexane, methanol, acetonitrile) and the mass ratio between sample:adsorbent (1:1; 1:5 and 1:10) were the evaluated factors for extraction using Ag@CD@ANS and commercial adsorbents (neutral alumina, octadecyl, silica gel). From the multivariate analysis, it was observed that the optimal condition for pesticide extraction using Ag@CD@ANS was reached, using a 1:5 ratio (sample:adsorbent) and acetonitrile (10 mL) as elution solvent. For the commercial adsorbents, the optimal condition for pesticide extraction was reached, using a 1:3 ratio (sample:adsorbent), acetonitrile (10 mL) and neutral alumina as commercial adsorbent. Ag@CD@ANS efficiency was compared with an optimal commercial adsorbent (neutral alumina). No significant difference (p < 0.05) between neutral alumina and Ag@CD@ANS was observed. Recoveries ranging from 75 to 105 % with coefficients of variation ≤ 15 % (n = 3) were obtained using neutral alumina while using Ag@CD@ANS, recoveries ranging from 73 to 102 %, with coefficient of variation ≤ 13 % (n = 3) were obtained for the target pesticides. Limits of detection ranging from 0.5 to 1.0 µg Kg−1 and limits of quantification ranging from 1.6 to 3.3 µg Kg−1 were reached. The results demonstrated that Ag@CD@ANS can alternatively be used as a support for the extraction of persistent organic pollutants, having the advantage of being reusable for up to three cycles.

Crystalline Neutral Aluminum Selenide/Telluride: Isoelectronic Aluminum Analogues of Carbonyls.

Neutral aluminum chalcogenides (R-Al(L)═Ch; L = ligand, Ch = chalcogen), stabilized by a Lewis base ligand, represent isoelectronic counterparts to carbonyl compounds and have long been pursued for isolation. Herein, we present the synthesis of an aluminum selenide, [N]-Al(iPr2-bimy)═Se, and an aluminum telluride, [N]-Al(iPr2-bimy)═Te, under ambient conditions ([N] = 1,8-bis(3,5-di-tert-butylphenyl)-3,6-di-tert-butylcarbazolyl; iPr2-bimy = 1,3-diisoproplylbenzimidazole-2-ylidene). These compounds arise from the oxidation reaction of [N]-Al(iPr2-bimy) with Se and (nBu)3P═Te, respectively. One notable characteristic of the Al and Ch interaction is the presence of an Al-Ch σ bond, strengthened by the electrostatic attraction between the Al+ and Ch- centers as well as the donation of lone pairs from Ch into vacant orbitals at Al. This results in an Al-Ch multiple bond with an ambiphilic nature. Preliminary investigations into their reactivity unveil their remarkable propensity for facile (cyclo)addition reactions with diverse substrates, including PhCCH, PhCN, AdN3, MeI, PhSiH3, and C6F6, leading to the formation of unprecedented main group heterocycles and alumachalcogenides.

Rapid determination of five halobenzoquinones in aquatic products by QuEChERS-ultra performance liquid chromatography-tandem mass spectrometry

Halobenzoquinones (HBQs), which are emerging chlorinated disinfection byproducts (DBPs), have attracted increasing attention because they are frequently detected in treated tap water, entrainment water, etc. These compounds are mainly generated during the water treatment process using chlorine, chloramine, and chlorine dioxide as disinfectants, and display more toxic effects than regulated DBPs, such as trihalomethane and haloacetic acid. HBQs have been recognized as potential bladder carcinogens and are harmful to the nervous system. Additionally, they can exert genotoxic effects and cause oxidative damage to DNA and proteins. The risk of HBQs in aquatic products is expected to rise because the disinfection of public facilities has significantly increased in recent years. Therefore, developing a sensitive and accurate analytical method to detect HBQs in aquatic products is of great importance. Several analytical methods, including gas chromatography, gas chromatography-mass spectrometry, electrochemical methods, liquid chromatography, and liquid chromatography-tandem mass spectrometry, can be used to identify and quantify HBQs in water. However, to the best of our knowledge, no reports on the determination of HBQ levels in aquatic products are yet available. Further, pretreatment is essential for HBQ determination because of the complex matrix effects of aquatic products. Herein, a sensitive and accurate method based on the QuEChERS technique coupled with ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) was developed for the simultaneous determination of five HBQs in aquatic products. For the QuEChERS procedure, the pretreatment conditions, such as the extraction solvent and adsorbent species, were systematically optimized. The sample was extracted with 10 mL of 10% methanol acetonitrile solution (containing 0.1% formic acid), dehydrated, and centrifuged with sodium chloride and anhydrous magnesium sulfate. The supernatant was purified using a QuEChERS packing material consisting of 50 mg N-propylethylenediamine (PSA), 30 mg of graphitized carbon black (GCB), and 30 mg of neutral alumina (Al2O3), dried with nitrogen, and concentrated. The five HBQs were separated on a Waters ACQUITY UPLC BEH C18 column (100 mm×2.1 mm, 1.7 μm) using 0.25% acetonitrile formate solution and 0.25% formic acid aqueous solution as the mobile phase under a gradient elution program and then detected using UPLC-MS/MS with negative electrospray ionization (ESI-) under multiple reaction monitoring (MRM) mode. Quantitative analysis was performed using a matrix-matched external standard method. The five HBQs achieved rapid separation within 6 min, indicating that the proposed method has a much shorter separation time compared with previous studies. The matrix effect was evaluated by establishing a matrix-matched calibration curve. The results showed that 2,5-dichloro-1,4-benzoquinone (2,5-DCBQ) presented a matrix-enhancing effect, whereas the other HBQs displayed matrix-inhibiting effects. In particular, tetrachlorobenzoquinone (TCBQ) exhibited strong inhibitory effects. Under the optimized experimental conditions, the five HBQs demonstrated good linear relationships in the range of 1.0-50.0 μg/L, with correlation coefficients (r)≥0.9992. The detection limits of the method were 0.15-0.8 μg/kg, and the recoveries of the target compounds were 85.9%-116.5%. The relative standard deviations were 1.4%-8.2%, which indicates good reproducibility. The proposed method was successfully applied to actual sample detection, and 2,6-dichloro-3-methyl-1,4-benzoquinone (2,6-DCMBQ) was detected in grass carp. The proposed method is convenient, sensitive, accurate, and suitable for the simultaneous determination of five HBQs in aquatic products. Moreover, the developed method provides a reliable reference for the routine monitoring of trace HBQs in food samples.

Analysis and subcellular distribution of organophosphate esters (OPEs) in rice tissues.

Recent studies have identified the ability of plants to uptake and translocate organophosphate esters (OPEs) within cells. In response to the increasing interest in OPEs and their occurrence in paddy fields and rice, the current study aimed to present an effective and sensitive GC-MS based methodology for quantitative determination of 11 OPEs with octanol-water coefficients ranging from 1.6 to 10. Rice was sonicated with hexane and dichloromethane, and fractionated on two columns: one consisting of neutral alumina, andneutral silica, and the other consisting of graphitized carbon black. Method precision was validated using spiked rice (n = 30) and procedural blanks (n = 9). The mean recovery of matrix spikes for all target OPEs were within 78-110% with relative standard deviation lower than 25%, with a few exceptions. This method was applied to process the wild rice (O. sativa) in which tri-n-propyl phosphate was the dominant targeted OPE. The recoveries of surrogate standards were 81 ± 17% for d12- tris(2-chloroethyl) phosphate and 95 ± 8.8% for 13C12- triphenyl phosphate. The developed method was further used to examine the recoveries of target OPEs in the subcellular structure of rice tissues, including cell wall, cell organelles, cell water-soluble fractions, and cell residue. Recoveries of most target OPEs were in the range of 50-150%; however, ion enhancement was observed for four OPEs in root and shoot tissues. Hydrophobic OPEs accumulated in the cell wall, cell residue, and cell organelles while chlorinated OPEs mainly distributed in the cell water-soluble fraction. These results provide new insight for the ecological risk assessment of OPEs in an important food staple.

The stability and reactivity of neutral and charged aluminium doped carbon clusters (Al1,2C2-70,±)

The stability and reactivity of Al-doped linear and quasi-linear carbon chains (Al1,2C2-70,±) were computationally investigated using various reaction and binding energy parameters. The dissociation of the clusters was studied via the elimination of Al, C from the neutral species, Al0,+, C0,+ the cationic species, and Al0,-, C0,- from the anionic species. The stability was further examined based on electron elimination reactions, such as electron detachment from Al1,2C2-7- and ionization of Al1,2C2-7. The study proceeded by formulating a novel relative energy parameter, which was generated from the binding energy values. The lowest energy dissociation channels of Al1,2C1-70,± were the Al and Al+ elimination from the neutral/anionic and cationic clusters, respectively. Under the dissociation conditions, the even-carbon species (m = 2,4,6) AlCm (doublet), AlCm+ (triplet), AlCm- (singlet), Al2Cm (singlet), Al2Cm+ (doublet) were found to be more stable than that of the odd-carbon clusters (m = 3,5,7), irrespective of the spin states. In the case of Al2Cm-, the odd carbon clusters were found to be more stable. The stability orders based on the widely used highly endothermic C-elimination reaction were found to be significantly different. We have systematically addressed the above disparities and have commented on how to accurately predict the abundance of the species under extreme experimental conditions. The reactivity of Al1,2-doped clusters was found to be higher than the bare carbon chains. Based on the bond-strength parameters calculated using AIM analysis, the Al1,2-doping led to an activated Al-C bond rather than the carbon chains, eventually resulting in reactive meal-carbon clusters. The Al-C bonding was discussed using electron density at the Al-C bond critical points (ρAl-C), the vibrational frequency of the Al-C bond (νAl-C), bond length (rAl-C), the NBO charge on the Al atoms (qAl) and with the molecular orbital diagrams. The results of the current investigations can be highly relevant to astrochemistry, spectroscopy, material, and organometallic chemistry communities.

A siloles: Synthetic, structural, photophysical properties, and highly efficient sensing of 2,4,6-trinitrophenol (TNP)

A siloles products are readily synthesized with anhydrous and low temperature, and the compounds are purified by column chromatography of neutral alumina with yields of more than 85 %. Their structural characteristics were analyzed by X-ray crystal structure. Siloles are a good δ*-π* conjugate system with low LUMO value. They have a higher emission of blue fluorescence under UV light. Luminescence sensing experiments exhibit that four siloles products can detect TNP with high sensitivity and selectivity. The detection mechanism of four siloles products towards TNP have been discussed.

Experimental oscillator strengths of Al I lines for near-infrared astrophysical spectroscopy

Context. Elemental abundances can be determined from stellar spectra, making it possible to study galactic formation and evolution. Accurate atomic data is essential for the reliable interpretation and modeling of astrophysical spectra. In this work, we perform laboratory studies on neutral aluminium. This element is found, for example, in young, massive stars and it is a key element for tracing ongoing nucleosynthesis throughout the Galaxy. The near-infrared (NIR) wavelength region is of particular importance, since extinction in this region is lower than for optical wavelengths. This makes the NIR wavelength region a better probe for highly obscured regions, such as those located close to the Galactic center. Aims. We investigate the spectrum of neutral aluminium with the aim to provide oscillator strengths (f-values) of improved accuracy for lines in the NIR and optical regions (670–4200 nm). Methods. Measurements of high-resolution spectra were performed using a Fourier transform spectrometer and a hollow cathode discharge lamp. The f-values were derived from experimental line intensities combined with published radiative lifetimes. Results. We report oscillator strengths for 12 lines in the NIR and optical spectral regions, with an accuracy between 2 and 11%, as well as branching fractions for an additional 16 lines.

Synergistic Reductive Electrolysis Mixture Additive-Based Dual-Cell Configuration: An Effective Approach for High-Performance Aqueous Aluminum–Air Battery

Neutral aqueous electrolyte-based aluminum–air (Al–air) batteries have managed to gather significant attention because of their characteristic safety and cost effectiveness. However, the formation of the passivation layer [Al(OH)3] on the aluminum anode inhibits the long-term shelf life of the battery. Herein, a novel strategy to overturn the passivation by altering the aluminum/electrolyte interface is proposed. Incorporation of synergistic reductive electrolysis mixture additives (Tiron + NaNO3) can significantly reduce the passivation of the aluminum anode. The efficacy of the Tiron + NaNO3 synergistic mixture additive has been systematically examined using half-cell and full-cell with different concentrations of the additives in 0.5% NaCl. Furthermore, dual cell performance was investigated with optimum concentration (0.005 M Tiron + 0.005 M NaNO3) of the additive in 0.5% NaCl as the anolyte and different concentrations of H2SO4 as the catholyte. It is found that the resulting pumpless dual cell battery comprising neutral electrolyte with 0.005 M Tiron + 0.005 M NaNO3 mixture additive as the anolyte and 1 M H2SO4 as the catholyte demonstrated a remarkable cell potential of 1.14 V at a current density of 1 mA g–1, which is closer to the theoretical value. Morphological investigations using optical microscopy studies and X-ray photoelectron spectroscopic investigations also confirmed that the Tiron + NaNO3 additive is effective in preventing the discharge product on both anode and cathode surfaces and thus resulting in enhanced battery performance.

The Effects of Acid and Water in the Formation of Anodic Alumina: DFT and Experiment Study

The DFT method is employed to study the adsorption and reaction behaviors of HC2O4-, H2PO4-, HSO4- and H2O on neutral and anodic aluminum slabs. With the exception of adsorption, the three acid radicals can successively take the two H atoms from the adsorbed H2O on the anodic aluminum slabs, which is the key step of the formation of anodic alumina. The dehydrogenation reaction is dominated by the Coulombic interaction of O and H, respectively belonging to acid radicals and the adsorbed H2O or OH, rather than by the interaction of electronic orbits located on the two kinds of atoms. The experiment of anodic polarization of aluminum verifies the calculation result well.