Negative Potential Research Articles

Mismatch Negativity and P300 in the Diagnosis and Prognostic Assessment of Coma and Other Disorders of Consciousness.

The objective of this study was to investigate the value of mismatch negativity (MMN) and P300 event-related potentials for discriminating the consciousness state and predicting improvement of consciousness at 6months in patients with coma and other disorders of consciousness (DOC). We performed MMN and P300 on 42 patients with DOC with a mean onset time of 40.21 ± 19.43days. These patients with DOC were categorized into coma, unresponsive wakefulness syndrome (UWS), minimal consciousness minus (MCS-), and minimal consciousness plus (MCS +) groups according to neurobehavioral assessment and the Coma Recovery Scale-Revised score. The primary outcome was the improvement of consciousness at 6months in patients with DOC. We assessed the efficacy of MMN and P300 in quantitatively predicting the prognosis at 6months and the capability of MMN and P300 parameters to differentiate between DOC. At least one significant difference in either MMN or P300 parameters was displayed among the DOC groups, but not between the MCS- and MCS+ groups (significance level: 0.05). Both MMN and P300 amplitudes showed desirable predictive accuracy at 6months, with areas under the curve (AUCs) of 0.859 and 0.856, respectively. The optimal thresholds for MMN and P300 amplitudes were 2.044 and 1.095μV. However, the combined MMN-P300 amplitude showed better 6-month predictive accuracy (AUC 0.934, 95% confidence interval 0.860-1.000), with a sensitivity of 85% and a specificity of 90.9%. MMN and P300 may help discriminate among coma, UWS, and MCS, but not between patients with MCS- and patients with MCS+ . The MMN amplitude, P300 amplitude, and especially combined MMN-P300 amplitude at 6months may be interesting predictors of consciousness improvement at 6months in patients with DOC. Chinese Clinical Trial Registry identifier ChiCTR2400083798.

Investigation of the Aggregation of Aβ Peptide (1-40) in the Presence of κ-Carrageenan-Stabilised Liposomes Loaded with Homotaurine

The kinetics of amyloid aggregation was studied indirectly by monitoring the changes in the polydispersity of mixed dispersion of amyloid β peptide (1-40) and composite liposomes. The liposomes were prepared from the 1,2-dioleoyl-sn-glicero-3-phoshocholine (DOPC) phospholipid and stabilised by the electrostatic adsorption of κ-carrageenan. The produced homotaurine-loaded and unloaded liposomes had a highly negative electrokinetic potential and remarkable stability in phosphate buffer (pH 4 and 7.4). For the first time, the appearance and evolution of the aggregation of Aβ were presented through the variation in the standard percentile readings (D10, D50, and D90) obtained from the particle size distribution analysis. The kinetic experiments indicated the appearance of the first aggregates almost 30 min after mixing the liposomes and peptide solution. It was observed that by adding unloaded liposomes, the size of 90% of the particles in the dispersion (D90) increased. In contrast, the addition of homotaurine-loaded liposomes had almost minimal impact on the size of the fractions of larger particles during the kinetic experiments. Despite the specific bioactivity of homotaurine in the presence of natural cell membranes, this study reported an additional inhibitory effect of the compound on the amyloid peptide aggregation due to the charge effects and ‘molecular crowding’.

Phytofabrication, characterization of silver nanoparticles using Hippophae rhamnoides berries extract and their biological activities

IntroductionFabrication of plant-based metal nanoparticles has yielded promising results, establishing this approach as viable, sustainable, and non-toxic in the biomedical sector for targeted drug delivery, diagnostic imaging, biosensing, cancer therapy, and antimicrobial treatments.MethodsThe present work demonstrates the suitability of Hippophae rhamnoides berries for the instant green synthesis of silver nanoparticles to check their antioxidant, lipid peroxidation, and antimicrobial potential. The preliminary characterization of Hippophae rhamnoides-mediated AgNPs was validated by monitoring the color shift in the solution from pale yellow to reddish brown, which was further confirmed by UV–vis spectroscopy and the plasmon peaks were observed at 450 nm. Field Emission Scanning Electron Microscopy (FESEM) and X-ray diffraction (XRD) were used to evaluate the surface topography and structure of AgNPs. Herein, the antioxidant potential of synthesized AgNPs was investigated using DPPH free radical assay and the antimicrobial efficacy of similar was checked against E. coli and S. aureus by following MIC (minimum inhibitory concentration) and MBC (Minimum bactericidal concentration) assay. Along with the inhibitory percentage of lipid peroxidation was analysed by following TBARS (Thiobarbituric acid reactive species) assay.Results & discussionThe results revealed that the AgNPs were spherical in shape with an average size distribution within the range of 23.5–28 nm and a crystalline structure. Negative zeta potential (−19.7 mV) revealed the physical stability of synthesized AgNPs as the repulsive force to prevent immediate aggregation. The bioactive functional moieties involved in reducing bulk AgNO3 into AgNPs were further validated by FTIR. TBARS was adapted to test lipid peroxidation, and Hippophae rhamnoides-mediated AgNPs showed a 79% inhibition in lipid peroxidation compared to Hippophae rhamnoides berries extract as 65%. Furthermore, the antibacterial tests showed 37 ± 0.01 mm and 35 ± 0.0132 mm, zones of inhibition against E. coli MTCC 1698 and S. aureus MTCC 3160 with MIC and MBC values of 1 mg/mL, respectively.

Revealing the Size and Potential Dependent D2O Microkinetics on Pt Nanoparticles Using Grand Canonical Ensemble Modeling.

Revealing the potential and nanoparticle size effect is significant for understanding the electrochemical microkinetic behaviors under real reaction conditions. Herein, an efficient strategy of combining the robust fully converged constant potential (FCP) algorithm and the size dependent site distribution rule assumption was proposed. A simple reaction of isotopic D2O/H2O adsorption and dissociation on Pt nanoparticles was set as the model reaction. The results show that the cathodic negative potential and the anodic positive potential would result in the D2O orientation of the D-down/O-down physisorption configuration. Microkinetic simulations by this strategy obtained electrochemical widows for D2O/H2O dissociation, and the optimal Pt nanoparticle diameter was predicted to be 1.8 nm, which agrees well with the experimental observation of ∼2 nm threshold. The kinetic isotope effect (KIE) rate constant ratio at the optimal potential of -0.80 V vs SHE was calculated to be ∼1.83. This work provides a guideline in studying electrochemical electrode-electrolyte interactions on nanoparticles.

How the Degree of Anthropomorphism of Human-like Robots Affects Users’ Perceptual and Emotional Processing: Evidence from an EEG Study

Anthropomorphized robots are increasingly integrated into human social life, playing vital roles across various fields. This study aimed to elucidate the neural dynamics underlying users’ perceptual and emotional responses to robots with varying levels of anthropomorphism. We investigated event-related potentials (ERPs) and event-related spectral perturbations (ERSPs) elicited while participants viewed, perceived, and rated the affection of robots with low (L-AR), medium (M-AR), and high (H-AR) levels of anthropomorphism. EEG data were recorded from 42 participants. Results revealed that H-AR induced a more negative N1 and increased frontal theta power, but decreased P2 in early time windows. Conversely, M-AR and L-AR elicited larger P2 compared to H-AR. In later time windows, M-AR generated greater late positive potential (LPP) and enhanced parietal-occipital theta oscillations than H-AR and L-AR. These findings suggest distinct neural processing phases: early feature detection and selective attention allocation, followed by later affective appraisal. Early detection of facial form and animacy, with P2 reflecting higher-order visual processing, appeared to correlate with anthropomorphism levels. This research advances the understanding of emotional processing in anthropomorphic robot design and provides valuable insights for robot designers and manufacturers regarding emotional and feature design, evaluation, and promotion of anthropomorphic robots.

You’re Beautiful When You Smile: Event-Related Brain Potential (ERP) Evidence of Early Opposite-Gender Bias in Happy Faces

Studies of social cognition have shown gender differences regarding human face processing. One interesting finding is the enhanced processing of opposite-gender faces at different time stages, as revealed by event-related brain potentials. Crucially, from an evolutionary perspective, such a bias might interact with the emotional expression of the face. To investigate this, 100 participants (50 female, 50 male) completed an expression-detection task while their EEG was recorded. In three blocks, fearful, happy and neutral faces (female and male) were randomly presented, with participants instructed to respond to only one predefined target expression level in each block. Using linear mixed models, we observed both faster reaction times as well as larger P1 and late positive potential (LPP) amplitudes for women compared to men, supporting a generally greater female interest in faces. Highly interestingly, the analysis revealed an opposite-gender bias at P1 for happy target faces. This suggests that participants’ attentional templates may include more opposite-gender facial features when selectively attending to happy faces. While N170 was influenced by neither the face nor the participant gender, LPP was modulated by the face gender and specific combinations of the target status, face gender and expression, which is interpreted in the context of gender-emotion stereotypes. Future research should further investigate this expression and attention dependency of early opposite-gender biases.

A Comparative Analysis of SARS-CoV-2 Variants of Concern (VOC) Spike Proteins Interacting with hACE2 Enzyme

In late 2019, the emergence of a novel coronavirus led to its identification as SARS-CoV-2, precipitating the onset of the COVID-19 pandemic. Many experimental and computational studies were performed on SARS-CoV-2 to understand its behavior and patterns. In this research, Molecular Dynamic (MD) simulation is utilized to compare the behaviors of SARS-CoV-2 and its Variants of Concern (VOC)-Alpha, Beta, Gamma, Delta, and Omicron-with the hACE2 protein. Protein structures from the Protein Data Bank (PDB) were aligned and trimmed for consistency using Chimera, focusing on the receptor-binding domain (RBD) responsible for ACE2 interaction. MD simulations were performed using Visual Molecular Dynamics (VMD) and Nanoscale Molecular Dynamics (NAMD2), and salt bridges and hydrogen bond data were extracted from the results of these simulations. The data extracted from the last 5 ns of the 10 ns simulations were visualized, providing insights into the comparative stability of each variant’s interaction with ACE2. Moreover, electrostatics and hydrophobic protein surfaces were calculated, visualized, and analyzed. Our comprehensive computational results are helpful for drug discovery and future vaccine designs as they provide information regarding the vital amino acids in protein-protein interactions (PPIs). Our analysis reveals that the Original and Omicron variants are the two most structurally similar proteins. The Gamma variant forms the strongest interaction with hACE2 through hydrogen bonds, while Alpha and Delta form the most stable salt bridges; the Omicron is dominated by positive potential in the binding site, which makes it easy to attract the hACE2 receptor; meanwhile, the Original, Beta, Delta, and Omicron variants show varying levels of interaction stability through both hydrogen bonds and salt bridges, indicating that targeted therapeutic agents can disrupt these critical interactions to prevent SARS-CoV-2 infection.

Junction Piezotronic Transistor Arrays Based on Patterned ZnO Nanowires for High-Resolution Tactile and Photo Mapping

Recently, a great deal of interest has been focused on developing sensors that can measure both pressure and light. However, traditional sensors are difficult to integrate into silicon (Si)-based integrated circuits. Therefore, it is particularly important to design a sensor that operates on a new principle. In this paper, junction piezotronic transistor (JPT) arrays based on zinc oxide (ZnO) nanowire are demonstrated. And the JPT arrays show high spatial resolution pressure and light mapping with 195 dpi. Because ZnO nanowires are arranged vertically above the p-type Si channel’s center of the transistor, the width of the heterojunction depletion region is constricted by the positive piezoelectric potential generated by strained ZnO. In addition, photogenerated charge carriers can be created in the Si channel when JPT is stimulated by light, which increases its electrical conductivity. Consequently, the external pressure and light distribution information can be obtained from the variation in the output current of the device. The prepared JPT arrays can be compatible with Si transistors, which make them highly competitive and make it possible to incorporate both pressure and light sensors into large integrated circuits. This work will contribute to many applications, such as intelligent clothing, human–computer interaction, and electronic skin.

Minitype Arrays of Acoustically Actuated Magnetoelectric Antennas for Magnetic Induction Communication

The magnetoelectric (ME) antennas rely on the mechanical movement of magnetic dipoles, making it possible to break the constraints on physical dimensions decided by the wavelength of the electromagnetic wavelength. The ME antennas achieve super-low frequency (SLF) communications with a smaller size to provide a novel solution for long-range, underwater, and underground communications; navigation over the horizon; and geological exploring. As a result, further theoretical research and optimization of ME antennas have been an open challenge for decades. Here, we report on minitype arrays of acoustically actuated ME antenna and their more rigorous equivalent circuits. These arrays of ME antenna adjust amplitude-frequency response through the mechanical regulation method. The mechanical parameters of ME antennas in the arrays result in regulating amplitude-frequency response, such as working frequency, fractional bandwidth, and intensity of magnetic induction. Our work provides a more accurate theoretical model and diverse array form over state-of-the-art ME antenna arrays. The frequency, fractional bandwidth, and magnetic induction strength of the ME antenna arrays were achieved to be adjustable in the ranges of 84 to 181 Hz, 3.9% to 8.3%, and two to four times, respectively. In addition, we have calculated the attenuation characteristics of ME antennas and their minitype arrays in seawater. The results show that the ME antenna array described in this manuscript is able to enhance the radiation intensity and information-loading capability, which has a positive potential for application in SLF communication systems.

The impact of social comparison on self-deception: An event-related potentials study.

Self-deception refers to an individual holding inflated beliefs about their abilities, and it plays a crucial role in human behavior and decision-making. The present study employed event-related potentials (ERPs) technique to explore the neural responses to the impacts of social comparison direction and comparison gap on self-deceptive behavior. They were instructed to predict their performance in the forward-looking paradigm. Behavioral responses and neural reactions during the decision-making process were documented. The behavioral results indicated that, in contrast to the downward comparison condition, participants engaged in upward comparison exhibited more occurrences of self-deception. However, within the context of upward comparison, participants demonstrated a higher frequency of self-deception in the large gap condition compared with the small gap condition. The ERP results showed that induced self-deception under conditions with a large comparative gap between participants and their paired counterparts stimulated larger P300 and smaller N400 amplitude than under conditions with a small gap. However, when participants were in the upward comparison situation, the late positive potential (LPP) amplitude induced by self-deception behavior in the condition of a large comparison gap between participants and paired opponents was larger than that in the condition of a small comparison gap. These results indicated that individuals in the large gap group feel strong unfairness and negative emotions. More importantly, the self-deception induced by the large gap group in the upward comparison situation used fewer cognitive resources than the small gap condition, whereas the individuals in the downward comparison situation did not show the difference in cognitive resources.

Hypervalent Chalcogen Bonds Catalysis on the Intramolecular Aza-Michael Reaction of Aminochalcone: Catalytic Performance and Chalcogen Bond Properties.

Chalcogen bond (ChB) catalysis, as a new type in the field of non-covalent bond catalysis, has become a hot research topic in the field of organocatalysis in recent years. In the present work, we investigated the catalytic performance of a series of hypervalent ChB catalysis based on the intramolecular Aza-Michael reaction of aminochalcone. The reaction includes the carbon-nitrogen bond coupling step (key step) and the proton transfer step. The catalytic performance of mono-dentate pentafluorophenyl chalcogen bond donor ChB1 was comparable to that of bis-dentate chalcogen bond donor ChB4, and stronger than that of mono-dentate chalcogen bond donors ChB2 and ChB3. The formation of the chalcogen bond between the catalyst and the carbonyl oxygen atom of the reactant, causing the charge rearrangement of the reactant and C(1) charge of the -C-Ph group to become more positive, thereby the ChB catalysis promoted the nucleophile reaction. The electron density of the chalcogen bond of the pre-complex, the most positive electrostatic potentials of the catalyst, and the NPA charge of the key atom are proportional to the Gibbs energy barrier of the C-N bond coupling process, which provides an idea to predict the catalytic activity of the ChB catalysis.

The potential of artificial intelligence in business

The article examines the potential of artificial intelligence in entrepreneurial activity in the Russian economy at the present stage of its development in the context of modern challenges. The authors identified Russia’s place in global trends related to artificial intelligence. The authors paid attention to such relatively little–studied aspects of the use of artificial intelligence as the modernization of business processes in all sectors of the economy; improving the labor market through new forms of employment; optimization of migration policy; increasing the efficiency of the institution of self–employment in general and in terms of pension provision for the self–employed in particular; optimization of the size of the «shadow economy»; improvement of entrepreneurial activity through more complete implementation of the functions of an entrepreneur. The authors have identified the high positive potential of artificial intelligence in solving a number of problems in the Russian economy, including: reducing the size of the shadow economy, optimizing the labor market and migration policy, improving business processes and a number of others.The article shows that reducing transaction and transformation costs with the help of artificial intelligence will increase the growth rate of the Russian economy, increase the level of well–being of citizens and fully realize the functions of an entrepreneur in a market economy.

Effect of Cr3C2 content on the tribo-corrosion behaviors of Cr3C2-NiCr/DLC duplex coatings

Duplex coatings consisted of a Cr3C2-NiCr intermediate layer with varying carbide content and a top DLC film were fabricated by combining high-velocity oxygen-fuel (HVOF) and physical vapor deposition (PVD) methods. The study focused on effect of Cr3C2 content in the intermediate layer on the tribo-corrosion behaviors of the Cr3C2-NiCr/DLC duplex coatings. The result showed that as the Cr3C2 content increased, the porosity of the duplex coating increased gradually, leading to a decrease in corrosion resistance. The tribo-corrosion behaviors of the duplex coatings were ultimately governed by the synergistic effect of their tribological and electrochemical performances. Notably, the Cr3C2 (35 wt%)-NiCr/DLC duplex coatings exhibited a relatively positive corrosion potential, a low corrosion current density, and the lowest wear rate, indicating superior tribo-corrosion resistance. Further increasing the Cr3C2 content led to a continuous increase in the promotion effect of corrosion on wear, especially when the Cr3C2 content was 80 wt%, the material volume loss caused by this effect accounted for 61.37 % of the total. The predominant wear mechanism of the duplex coatings changed from abrasive wear to corrosion wear with the increase of Cr3C2 content.

Tailored Design of Mesoporous Nanospheres with High Entropic Alloy Sites for Efficient Redox Electrocatalysis.

High Entropy Alloys (HEAs) are a versatile material with unique properties, tailored for various applications. They enable pH-sensitive electrocatalytic transformations like hydrogen evolution reaction (HER) and hydrogen oxidation reactions (HOR) in alkaline media. Mesoporous nanostructures with high surface area are preferred for these electrochemical reactions, but designing mesoporous HEA sis challenging. To overcome this challenge, a low-temperature triblock copolymer-assisted wet-chemical approach is developed to produce mesoporous HEA nanospheres composed of PtPdRuMoNi systems with sufficient entropic mixing. Owing to active sites with inherent entropic effect, mesoporous features, and increased accessibility, optimized HEA nanospheres promote strong HER/HOR performance in alkaline medium. At 30 mV nominal overpotential, it exhibits a mass activity of ≈167 (HER) and 151 A gPt -1 (HOR), far exceeding commercial Pt-C electrocatalysts (34 and 48 A gPt -1) and many recently reportedvarious alloys. The Mott-Schottky analysis reveals HEA nanospheres inherit high charge carrier density, positive flat band potential, and smaller charge transfer barrier, resulting in better activity and faster kinetics. This micelle-assisted synthetic enable the exploration of the compositional and configurational spaces of HEAs at relatively low temperature, while simultaneously facilitating the introduction of mesoporous nanostructures for a wide range of catalytic applications.

Stability and SERS signal strength of laser-generated gold, silver, and bimetallic nanoparticles at different KCl concentrations

Noble metal nanoparticles, specifically gold and silver, are extensively utilized in sensors, catalysts, surface-enhanced Raman scattering (SERS), and optical-electronic components due to their unique localized surface plasmon resonance (LSPR) properties. The production of these nanoparticles involves various methods, but among the environmentally friendly approaches, laser ablation stands out as it eliminates the need for toxic chemicals during purification. However, nanoparticle aggregation poses a challenge in laser ablation, necessitating the addition of extra materials that contaminate the otherwise clean process. In this study, we investigate the effectiveness of a biocompatible material, potassium chloride (KCl), in preventing particle aggregation. Although salt is known to trigger aggregation, we observed that certain concentrations of KCl can slow down this process. Over an eight-week period, we examined the aggregation rate, extinction behavior, and stability of gold, silver, and hybrid nanoparticles generated in different KCl concentrations. Extinction spectra, SEM images, SERS signal strength, and zeta potential were analyzed. Our results demonstrate that laser ablation in water and salt solutions yields nanoparticles with a spherical shape and a negative zeta potential. Importantly, we identified the optimal concentration of potassium chloride salt that maintains solution stability and SERS signal strength. Adsorbed chloride ions on silver nanoparticles were evidenced by low-frequency SERS band near 242 cm−1. A better understanding of the effect of KCl concentration on the properties of noble metal nanoparticles can lead to improved generation protocols and the development of tailored nanoparticle systems with enhanced stability and SERS activity.

Neuroprotective efficiency of celecoxib vesicular bilosomes for the management of lipopolysaccharide-induced Alzheimer in mice employing 23 full factorial design.

The aim of this study was to develop and evaluate bilosomes loaded with Celecoxib (CXB) for the efficient treatment of Alzheimer. The thin-film hydration approach was utilized in the formulation of CXB bilosomes (CXB-BLs). The study used a 23-factorial design to investigate the impact of several formulation variables. Three separate parameters were investigated: bile salt type (X1), medication amount (X2), and lipid-bile salt ratio (X3). The dependent responses included entrapment efficiency (Y1: EE %), particle size (Y2: PS), and zeta potential (Y3: ZP). The formulation factors were statistically optimized using the Design-Expert® program. The vesicles demonstrated remarkable CXB encapsulation efficiency, ranging from 94.16 ± 1.91 to 98.38 ± 0.85%. The vesicle sizes ranged from 241.8 ± 6.74 to 352 ± 2.34nm. The produced formulations have high negative zeta potential values, indicating strong stability. Transmission electron microscopy (TEM) revealed that the optimized vesicles had a spherical form. CXB release from BLs was biphasic, with the release pattern following Higuchi's model. In vivo studies confirmed the efficiency of CXB-BLs in management of lipopolysaccharide-induced Alzheimer as CXB-BLs ameliorated cognitive dysfunction, decreased acetylcholinesterase (AChE), and inhibited neuro-inflammation and neuro-degeneration through reducing Toll-like receptor (TLR4), and Interleukin-1β (IL-1β) levels. The findings suggested that the created CXB-BLs could be a potential drug delivery strategy for Alzheimer's treatment.

Functional Nanostructured Lipid Carrier-Enriched Hydrogels Tailored to Repair Damaged Epidermal Barrier.

In this study, a functional nanostructured lipid carriers (NLCs)-based hydrogel was developed to repair the damaged epidermal skin barrier. NLCs were prepared via a high-energy approach, using argan oil and beeswax as liquid and solid lipids, respectively, and were loaded with ceramides and cholesterol at a physiologically relevant ratio, acting as structural and functional compounds. Employing a series of surfactants and optimizing the preparation conditions, NLCs of 215.5 ± 0.9 nm in size and a negative zeta potential of -42.7 ± 0.9 were obtained, showing acceptable physical and microbial stability. Solid state characterization by differential scanning calorimetry and X-ray powder diffraction revealed the formation of imperfect crystal NLC-type. The optimized NLC dispersion was loaded into the gel based on sodium hyaluronate and xanthan gum. The gels obtained presented a shear thinning and thixotropic behavior, which is suitable for dermal application. Incorporating NLCs enhanced the rheological, viscoelastic, and textural properties of the gel formed while retaining the suitable spreadability required for comfortable application and patient compliance. The NLC-loaded gel presented a noticeable occlusion effect in vitro. It provided 2.8-fold higher skin hydration levels on the ex vivo porcine ear model than the NLC-free gel, showing a potential to repair the damaged epidermal barrier and nourish the skin actively.

Assessment of Antimicrobial and Cytotoxic Activities of Liposomes Loaded with Curcumin and Lippia origanoides Essential Oil.

(1) Introduction: Curcumin and Lippia origanoides essential oils have a broad spectrum of biological activities; however, their physicochemical instability, low solubility, and high volatility limit their therapeutic use. Encapsulation in liposomes has been reported as a feasible approach to increase the physicochemical stability of active substances, protect them from interactions with the environment, modulate their release, reduce their volatility, improve their bioactivity, and reduce their toxicity. To date, there are no reports on the co-encapsulation of curcumin and Lippia origanoides essential oils in liposomes. Therefore, the objective of this work is to prepare and physiochemical characterize liposomes loaded with the mixture of these compounds and to evaluate different in vitro biological activities. (2) Methods: Liposomes were produced using the thin-layer method and physiochemical characteristics were calculated. The antimicrobial and cytotoxic activities of both encapsulated and non-encapsulated compounds were evaluated. (3) Results: Empty and loaded nanometric-sized liposomes were obtained that are monodisperse and have a negative zeta potential. They inhibited the growth of Staphylococcus aureus and did not exhibit cytotoxic activity against mammalian cells. (4) Conclusions: Encapsulation in liposomes was demonstrated to be a promising strategy for natural compounds possessing antimicrobial activity.

Ranitidine degradation in layered double hydroxide activated peroxymonosulfate system: impact of transition metal composition and reaction mechanisms.

Ranitidine, a competitive inhibitor of histamine H2 receptors, has been identified as an emerging micropollutant in water and wastewater, raising concerns about its potential impact on the environment and human health. This study aims to address this issue by developing an effective removal strategy using two types of layered double hydroxide (LDH) catalysts (i.e., CoFeLDH and CoCuLDH). Characterization results show that CoFeLDH catalyst has superior catalytic properties due to its stronger chemical bond compared to CoCuLDH. The degradation experiment shows that 100% degradation of ranitidine could be achieved within 20min using 25mg/L of CoFeLDH and 20mg/L of peroxymonosulfate (PMS). On the other hand, CoCuLDH was less effective, achieving only 70% degradation after 60min at a similar dosage. The degradation rate constant of CoFeLDH was 10 times higher than the rate constant of CoCuLDH at different pH range. Positive zeta potential of CoFeLDH made it superior over CoCuLDH regarding catalytic oxidation of PMS. The catalytic degradation mechanism shows that sulfate radicals played a more dominant role than hydroxyl radicals in the case of LDH catalysts. Also, CoFeLDH demonstrated a stronger radical pathway than CoCuLDH. XPS analysis of CoFeLDH revealed the cation percentages at different phases and proved the claim of being reusable even after 8 cycles. Overall, the findings suggest that CoFeLDH/PMS system proves to be a suitable choice for attaining high degradation efficiency and good stability in the remediation of ranitidine in wastewater.

Development of a freshness indicator packaging system using cold atmospheric plasma on LLDPE–PVA with Laponite–anthocyanin biohybrid

AbstractThis study developed a freshness indicator based on poly(vinyl alcohol) (PVA) and a biohybrid (BH) of Laponite® and anthocyanins adhered to linear low‐density polyethylene (LLDPE) using cold atmospheric plasma (CAP). LLDPE was treated with CAP for 0 to 300 s, which resulted in an increased surface energy, characterized by an important increase in its polar component up to 120 s of treatment, due to the formation of polar groups on the surface of LLDPE. No changes in mechanical properties and water vapor permeability of LLDPE were observed. LLDPE–PVA–BH films were more homogeneous if BH was added before the acidification of the film‐forming solution due to more negative zeta potential and lower particle size of BH in basic medium. Indicators made with BH were able to maintain color after 8 weeks of exposure to light, while those made with anthocyanin extract had fully degraded after 3 weeks. The freshness indicator's color changed from purple to blue and finally to green when exposed to ammonia hydroxide (30% NH3) and from purple to blue when exposed to a simulant liquid of spoiled meat (0.03% NH3). Similar color variance was observed when the indicator was applied to monitor shrimp freshness, changing from purple to blue when the shrimp pH reached pH 7.6. Thus, bilayer films of LLDPE–PVA and natural BH produced using CAP have potential food packaging applications. © 2024 Society of Chemical Industry.