Near-field Coupling Research Articles

Accurate semi-numerical approach for multilayer metasurfaces with near-field coupling

Multilayer metasurfaces have attracted much attention for broad bandwidth and high transmission efficiency. However, the electromagnetic (EM) coupling will be significant and greatly affect the transmission performance when the inter-layer distance is in subwavelength scale. Here, we present a generally equivalent circuit approach (ECA) that can be used to investigate the transmission performance and the near-field coupling mechanism in multilayer metasurfaces. Based on the proposed ECA, the analytical expression of transmission coefficient is obtained. The accuracy of the circuit model is further verified by several typical multilayer metasurfaces in ultrawideband from 0 to 30 GHz. The proposed method is valid for an arbitrary multilayer metasurface system, regardless of the layer number and the metallic elements.

Near-Field Electromagnetic Coupling Effects in Optical Spectra of One-Dimensional and Two-Dimensional Arrays of Metal Nanoparticles

Near-Field Electromagnetic Coupling Effects in Optical Spectra of One-Dimensional and Two-Dimensional Arrays of Metal Nanoparticles

Cross-Band Mutual Coupling Reduction in Dual-Band Base-Station Antennas With a Novel Grid Frequency Selective Surface

In this communication, a grid frequency selective surface (GFSS) is developed for cross-band near-field mutual coupling suppression. The unit cell of the GFSS consists of a break metal strip and a parallel <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">LC</i> resonator. The GFSS realizes low-stop property at 1.7–2.4 GHz (B1 band) and high-pass property at 3.3–3.8 GHz (B2 band). The novel GFSS is applied in a 5G dual-band antenna array with one B1 band antenna and four B2 band antennas. The cross-band mutual coupling coefficients are reduced from −14 dB to lower than −35 dB at the B1 band. Meanwhile, the radiation patterns of the B2 band antenna element are not affected due to the nonscattering feature of the GFSS. The dual-band base-station antenna array prototype is fabricated and measured to demonstrate the effectiveness of the proposed design in cross-band mutual coupling reduction.

Strong near-field couplings of anapole modes and formation of higher-order electromagnetic modes in stacked all-dielectric nanodisks

We theoretically study the near-field couplings of two stacked all-dielectric nanodisks, where each disk has an electric anapole mode consisting of an electric dipole mode and an electric toroidal dipole (ETD) mode. Strong bonding and anti-bonding hybridizations of the ETD modes of the two disks occur. The bonding hybridized ETD can interfere with the dimer’s electric dipole mode and induce a new electric anapole mode. The anti-bonding hybridization of the ETD modes can induce a magnetic toroidal dipole (MTD) response in the disk dimer. The MTD and magnetic dipole resonances of the dimer form a magnetic anapole mode. Thus, two dips associated with the hybridized modes appear on the scattering spectrum of the dimer. Furthermore, the MTD mode is also accompanied by an electric toroidal quadrupole mode. The hybridizations of the ETD and the induced higher-order modes can be adjusted by varying the geometries of the disks. The strong anapole mode couplings and the corresponding rich higher-order mode responses in simple all-dielectric nanostructures can provide new opportunities for nanoscale optical manipulations.

Double-Layer Chiral System with Induced Circular Dichroism by Near-Field Coupling

Circular dichroism (CD) is widely used in enantiomer identification, photodetection, and circular polarization devices. Improving the CD signal of easily prepared 3D chiral nanostructures by design...

Chalcogenide Glass Microfibers for Mid-Infrared Optics

With diameters close to the wavelength of the guided light, optical microfibers (MFs) can guide light with tight optical confinement, strong evanescent fields and manageable waveguide dispersion and have been widely investigated in the past decades for a variety of applications. Compared to silica MFs, which are ideal for working in visible and near-infrared regions, chalcogenide glass (ChG) MFs are promising for mid-infrared (mid-IR) optics, owing to their easy fabrication, broad-band transparency and high nonlinearity, and have been attracting increasing attention in applications ranging from near-field coupling and molecular sensing to nonlinear optics. Here, we review this emerging field, mainly based on its progress in the last decade. Starting from the high-temperature taper drawing technique for MF fabrication, we introduce basic mid-IR waveguiding properties of typical ChG MFs made of As2S3 and As2Se3. Then, we focus on ChG-MF-based passive optical devices, including optical couplers, resonators and gratings and active and nonlinear applications of ChG MFs for mid-IR Raman lasers, frequency combs and supercontinuum (SC) generation. MF-based spectroscopy and chemical/biological sensors are also introduced. Finally, we conclude the review with a brief summary and an outlook on future challenges and opportunities of ChG MFs.

Broadband Terahertz Photonic Integrated Circuit with Integrated Active Photonic Devices

Present-day photonic terahertz (100 GHz–10 THz) systems offer dynamic ranges beyond 100 dB and frequency coverage beyond 4 THz. They yet predominantly employ free-space Terahertz propagation, lacking integration depth and miniaturisation capabilities without sacrificing their extreme frequency coverage. In this work, we present a high resistivity silicon-on-insulator-based multimodal waveguide topology including active components (e.g., THz receivers) as well as passive components (couplers/splitters, bends, resonators) investigated over a frequency range of 0.5–1.6 THz. The waveguides have a single mode bandwidth between 0.5–0.75 THz; however, above 1 THz, these waveguides can be operated in the overmoded regime offering lower loss than commonly implemented hollow metal waveguides, operated in the fundamental mode. Supported by quartz and polyethylene substrates, the platform for Terahertz photonic integrated circuits (Tera-PICs) is mechanically stable and easily integrable. Additionally, we demonstrate several key components for Tera-PICs: low loss bends with radii ∼2 mm, a Vivaldi antenna-based efficient near-field coupling to active devices, a 3-dB splitter and a filter based on a whispering gallery mode resonator.

Investigation of the characteristics of the dual-band electromagnetic induction transparent-like terahertz spectrum in a grating-like structure

In this paper, a new structure is proposed which is expected to realize a dual-band electromagnetically induced transparency (EIT)-like effect in the terahertz spectrum. It can be regarded as a metamaterial of grating-like elements composed of dual-band U-shaped resonators. The near-field coupling between bright modes can produce an EIT-like effect. After optimizing the parameters, our numerical simulated results are in good agreement with the theoretical analysis. The EIT-like effect can significantly reduce the group speed near the transparent window, and may gain more significant potential applications in slow-light transmission and optical storage.

Transparent hybrid anapole metasurfaces with negligible electromagnetic coupling for phase engineering

AbstractAll-dielectric nanophotonics has become one of the most active fields of research in modern optics, largely due to the opportunities offered by the simultaneous resonant control of electric and magnetic components of light at the nanoscale. In this rapidly evolving scenario, the possibility to design artificial Huygens sources by overlapping electric and magnetic resonances has established a new paradigm in flat optics, bringing devices closer to efficient wavefront shaping with direct phase engineering at the level of the individual meta-atoms. However, their efficiency is fundamentally limited by the near-field coupling between the constituents of the metalattice. In this work, we challenge this well-conceived notion and propose an alternative concept to achieve phase control and full transmission in metasurfaces, based on the unusual properties of the nonradiating sources known as hybrid anapoles (HAs). We analyze theoretically an array of such sources and demonstrate that HAs are characterized by negligible coupling with their neighbors. Therefore, in contrast to Huygens particles, the proposed sources can operate as individual meta-atoms even in highly compact designs, becoming robust against strong disorder and preserving its characteristics when deposited on dielectric substrates. Remarkably, the phase of the transmitted wave can be modulated with negligible reflection. To illustrate the capabilities of our platform, we also utilize a disordered HA array to implement a controlled phase modulation to an ultrafast Gaussian pulse. The results of our study represent a departure from the currently established designs and open an avenue toward the realization of new devices for flat optics with unprecedented efficiency.

A Novel Method of Transmission Enhancement and Misalignment Mitigation between Implant and External Antennas for Efficient Biopotential Sensing.

The idea of passive biosensing through inductive coupling between antennas has been of recent interest. Passive sensing systems have the advantages of flexibility, wearability, and unobtrusiveness. However, it is difficult to build such systems having good transmission performance. Moreover, their near-field coupling makes them sensitive to misalignment and movements. In this work, to enhance transmission between two antennas, we investigate the effect of superstrates and metamaterials and propose the idea of dielectric fill in between the antenna and the superstrate. Preliminary studies show that the proposed method can increase transmission between a pair of antennas significantly. Specifically, transmission increase of ≈5 dB in free space and ≈8 dB in lossy media have been observed. Next, an analysis on a representative passive neurosensing system with realistic biological tissues shows very low transmission loss, as well as considerably better performance than the state-of-the-art systems. Apart from transmission enhancement, the proposed technique can significantly mitigate performance degradation due to misalignment of the external antenna, which is confirmed through suitable sensitivity analysis. Overall, the proposed idea can have fascinating prospects in the field of biopotential sensing for different biomedical applications.

Ultrasensitive terahertz sensing with broadside coupled polarization insensitive graphene metamaterial cavities

The ubiquitous property of metamaterials to confine energy at deep-subwavelength scale paves the way to leverage strong light (or terahertz)-matter interactions towards the development of efficient, state-of-the-art sensing technologies at the terahertz (THz) frequencies. In two-dimensional active metamaterials, for instance, graphene metasurfaces; THz-matter interactions are largely governed by the near-field coupling, where strong field confinement is predominantly achieved within very small areas (compared to total device area), viz, in split gaps, narrow apertures etc. Here, we demonstrate a polarization insensitive broadside coupling mechanism in graphene- metamaterials, which is beneficial for realization of miniaturized, compact, ultra-sensitive THz thin film sensors with substantially large effective areas for strong THz-matter interaction. Proposed structure entails ultrathin layer of dielectric spacer (cavity) sandwiched between two “plus” shaped sub-wavelength graphene resonators. In order to investigate the sensing capabilities, obscure materials are placed in ultrathin cavity region to detect its refractive indices. A record high refractive index sensitivity of around 2.8 THz/RIU substantiates the utility of introducing the concept of broadside coupling in graphene metamaterials. Further, we employ the Lorentz oscillator based coupled mode theory in order to elucidate the numerical outcomes.

Multiarchitecture-Based Plasmonic-Coupled Emission Employing Gold Nanoparticles: An Efficient Fluorescence Modulation and Biosensing Platform.

Surface plasmon-coupled emission (SPCE) is an efficient surface-enhanced fluorescence method based on the near-field coupling process of surface plasmons and fluorophores. Based on this, we developed multiple coupling structures for an SPCE system by introducing gold nanoparticles (AuNPs) with different architectures by adjusting different modification methods and configurations. By assembling AuNPs on a gold substrate through electrostatic adsorption and spin-coating, 40- and 55-fold enhancements were obtained compared to free space (FS) emission, respectively. After theoretical simulations and the optimization of experimental conditions, a novel "hot-spot" plasmonic structure, an intense electromagnetic field within the system, plasmonic properties, and the coupled process were found to be mainly responsible for the diverse enhancement effects observed. For the spin-coating deposition method, new enhancing systems with high efficiency can be easily built without complex modification. Additionally, the subsequent detection system based on the uniform modification of AuNPs through electrostatic adsorption is convenient to establish with high sensitivity and stability, which can broaden the application of SPCE in both fluorescence-based sensing and imaging. This AuNP-enhanced SPCE using an electrostatic adsorption method was designed as an immunosensor to prove feasibility.

Monitoring allergic reaction to penicillin based on ultrasensitive detection of penicilloyl protein using alkyne response SERS immunosensor

The evaluation of true penicillin allergy is significant to reduce its occurrence and the overdiagnosis before anti-infective treatment. However, the currently available methods with high specificity still face the problem of low sensitivity, thereby easily leading to false negatives. Herein, an alkyne responsive surface-enhanced Raman scattering (SERS) immunosensor is reported for ultrasensitive detection of penicillin allergen penicilloyl protein (P-protein) by using Au-Ag alloy nanoparticles@(antibody + alkyne probe) (as SERS immunoprobe) together with Ag nanofilm modified by antibody (as SERS capture substrate). The SERS immunoassay integrates the interference-free Raman response of high wavenumber region (2212 cm−1) and specific capture antibody with high affinity to selectively recognize P-protein from complicated sample. Meanwhile, the target-induced near-field coupling effect between localized surface plasmon resonances of individual SERS immunoprobe and capture substrate enables the detection of P-protein as low as pg/mL level, and the limit of detection can reach 0.329 pg/mL that is about 6 orders of magnitude lower than the limit defined protein residue (causing penicillin allergy). With the ultrasensitivity and specific selectivity, the proposed SERS immunoassay platform can precisely evaluate the content of P-protein in blood sample or penicillin drugs. It will be a potential tool to monitor allergic reaction to penicillin and better understand the mechanism of penicillin hypersensitivity.

Analogue of Electromagnetically Induced Transparency in an All-Dielectric Double-Layer Metasurface Based on Bound States in the Continuum.

Bound states in the continuum (BICs) have attracted much attention due to their infinite Q factor. However, the realization of the analogue of electromagnetically induced transparency (EIT) by near-field coupling with a dark BIC in metasurfaces remains challenging. Here, we propose and numerically demonstrate the realization of a high-quality factor EIT by the coupling of a bright electric dipole resonance and a dark toroidal dipole BIC in an all-dielectric double-layer metasurface. Thanks to the designed unique one-dimensional (D)–two-dimensional (2D) combination of the double-layer metasurface, the sensitivity of the EIT to the relative displacement between the two layer-structures is greatly reduced. Moreover, several designs for widely tunable EIT are proposed and discussed. We believe the proposed double-layer metasurface opens a new avenue for implementing BIC-based EIT with potential applications in filtering, sensing and other photonic devices.

Two orders of magnitude extra SERS enhancement on silver nanoparticle-based substrate induced by laser irradiation in nitrogen ambient

Photo-reduction of silver oxide and light-induced Ag nanoparticle (NP) generations have been applied for Surface-enhanced Raman spectroscopy (SERS) substrate fabricated for years. In this paper, we demonstrate a general method to enhance the SERS activity of conventional Ag NPs-based SERS substrates by performing Raman scattering measurement in a nitrogen ambient after a period of laser irradiation (photoactivation). The Raman characteristic peak intensity of carbonaceous impurities adsorbed on the surfaces of Ag NPs display an additional enhancement of 93 times after photoactivation in nitrogen ambient. A 3-fold extra Raman gain enhancement is also observed in the nitrogen-protected SERS measurement of R6G molecules. The extra SERS enhancement is attributed to the sub-nanometer scale near-field coupling between the Ag NPs and the photo-generated Ag clusters in the surface oxide layer of Ag NPs. This model is verified through the finite-difference time-domain (FDTD) simulations.

A non-invasive real-time monitoring system for cytotoxic brain edema in post ischemic stroke based on near-field coupling.

As a common secondary pathophysiological process in postischemic stroke (IS), cytotoxic brain edema (CBE) is an independent factor leading to poor prognosis of patients. Near-field coupling (NFC) technology has some advantages such as non-invasive, non-contact, and unimpeded penetration of the skull. In theory, it can reflect the difference between normal and edema tissues through the near-field coupling phase shift (NFCPS) in the electromagnetic wave transmission trait. Combining NFC detection principle and computer programming, we established a high-performance real-time monitoring system with functions such as automatic setting of measurement parameters, data acquisition, real-time filtering and dynamic waveform display. To investigate the feasibility of this system to detect CBE, a saline simulation experiment and a 24-hour real-time monitoring experiment after middle cerebral artery occlusion (MCAO) in rats were carried out. The results of the saline simulation experiment showed that the change of NFCPS was proportional to the increase of the simulated edema solution, and the variation range of NFCPS was more than 9∘ after 5ml injection. In the 24-hour monitoring after MCAO, the NFCPS of the experimental group showed an overall downward trend over time an average change of -17.7868 ± 1.6325∘ and the change rate gradually decreased. The 24-hour NFCPS in the control group fluctuates slightly around the initial value, which has no obvious upward or downward trend. The intragroup and intergroup difference statistical analysis shows that NFCPS can effectively distinguish different intracranial pathophysiological states after IS. This work provides sufficient evidence and a technical basis for using NFCPS to monitor CBE in the future.

Multiple Sharp Fano Resonances in a Deep-Subwavelength Spherical Hyperbolic Metamaterial Cavity.

We theoretically study the multiple sharp Fano resonances produced by the near-field coupling between the multipolar narrow plasmonic whispering-gallery modes (WGMs) and the broad-sphere plasmon modes supported by a deep-subwavelength spherical hyperbolic metamaterial (HMM) cavity, which is constructed by five alternating silver/dielectric layers wrapping a dielectric nanosphere core. We find that the linewidths of WGMs-induced Fano resonances are as narrow as 7.4–21.7 nm due to the highly localized feature of the electric fields. The near-field coupling strength determined by the resonant energy difference between WGMs and corresponding sphere plasmon modes can lead to the formation of the symmetric-, asymmetric-, and typical Fano lineshapes in the far-field extinction efficiency spectrum. The deep-subwavelength feature of the proposed HMM cavity is verified by the large ratio (~5.5) of the longest resonant wavelength of WGM1,1 (1202.1 nm) to the cavity size (diameter: 220 nm). In addition, the resonant wavelengths of multiple Fano resonances can be easily tuned by adjusting the structural/material parameters (the dielectric core radius, the thickness and refractive index of the dielectric layers) of the HMM cavity. The narrow linewidth, multiple, and tunability of the observed Fano resonances, together with the deep-subwavelength feature of the proposed HMM cavity may create potential applications in nanosensors and nanolasers.

Single-layer graphene optical modulator based on arrayed hybrid plasmonic nanowires.

Surface plasmon-polaritons (SPPs)-based waveguides, especially hybrid plasmonic nanowires, which have attracted extensive interests due to easy fabrication, high transmittance, subwavelength mode confinement and long propagation distance, are appropriate platforms for enhancing the interaction with graphene. Considering that graphene is a two-dimensional (2D) material with surface conductivity, it is important to enhance the in-plane electrical components parallel to graphene. Here, we propose a tunable graphene optical modulator based on arrayed hybrid plasmonic nanowires, utilizing strong subwavelength confinement of gap-surface plasmonic modes (GSPMs) and near-field coupling in the periodic metasurface structure to enhance effective light-matter interactions. The modulator has a typical modulation depth (MD) of 4.7 dB/μm, insertion loss (IL) of 0.045 dB/μm, and a broadband response. The modulation performance can be further optimized, achieving MD of 16.7 dB/μm and IL of 0.17 dB/μm. Moreover, with the optimized modulator, the 3 dB bandwidth can reach 200 GHz. The energy consumption of modulator is about 0.86 fJ/bit. Our design exhibits fascinating modulation performance, fabrication compatibility and integration potential. It may inspire the schematic designs of graphene-based plasmonic modulator and pave a way to the application of 2D materials-involved optoelectronic devices.

Experimental validation of the fundamental mode approximation for stacked metasurfaces and its application to the treatment of arbitrary period ratios

We experimentally realize a series of incommensurable metasurface stacks that transition from near-field coupling to a far-field regime. Based on a comparison between a semi-analytic model and measurements, we, furthermore, present an experimental study on the validity of the fundamental mode approximation (FMA). As the FMA is a condition for the homogeneity of a metasurface, its validity allows for strong simplification in the design of stacked metasurfaces. Based on this, we demonstrate a method for the semi-analytic design of stacked periodic metasurfaces with arbitrary period ratios. In particular, incommensurable ratios require computational domains of impractically large sizes and are usually very challenging to fabricate. This results in a noticeable gap in parameter space when optimizing metasurface stacks for specific optical features. Here, we aim to close that gap by utilizing the principles of the FMA, allowing for additional parameter combinations in metasurface design.

Plasmonic Au Nanoparticle Arrays for Monitoring Photopolymerization at the Nanoscale

The localized surface plasmon resonance (LSPR) of Au nanoparticles (NPs) was used to monitor photopolymerization at the nanoscale by in situ monitoring the optical response of AuNPs during the light-induced polymerization process. To show the interest of this approach, two configurations were used, which correspond to a resonant and a nonresonant excitation regime between the photopolymer and the AuNPs used as nanoprobes. We show that not only this method enables the progress monitoring of the photopolymerization reaction at the nanometric scale but also can highlight the near-field coupling effect responsible for the acceleration of the photoinduced reaction. This methodology appears very interesting to study the photoinduced nanofabrication processes of metal/polymer hybrid nanoparticles and more globally to study the photopolymerization reactions at the nanometric scale.